BMW Engine Parts for BMW 4 Series F33 (2014+)

N20 Wastegate Actuator - 11657638783

T#:36981074

Part#: 11657638783

In Stock

Sale - Save 10% $ 228.99

This product was last offered at the strikethrough price on
05-03-2026

$ 205.62 USD

Add to Wish List

Qty

Sale - Save 10%

$ 228.99

This product was last offered at the strikethrough price on
05-03-2026

$ 205.62 USD

Add to Wish List

The wastegate actuator plays a critical role in regulating boost pressure by releasing excess pressure from the turbocharger. A malfunctioning actuator can lead to boost leaks, reduced engine performance, and potentially severe turbocharger damage.

Restore your vehicle's performance and protect your turbocharger by replacing a failed wastegate actuator with this high-quality OE replacement from Turner Motorsport. Engineered to meet exacting standards, this component ensures precise functionality and long-lasting reliability.

Show More Show Less

Genuine BMW Oil pan suction pipe/ baffle

T#:35064

Part#: 11417590736

In Stock

$ 152.20 USD

Add to Wish List

Qty

$ 152.20 USD

Add to Wish List

Genuine BMW Suction Pipe -
This item fits the following BMW Chassis:
E82,E90,E92,E93,F22,F30,F32,F33,F36

Fits BMW Engines including:
N55

Boost Plus UltraSafe Lithium 1000A Jump Starter - NOCO

T#:641108

Part#: GB40

In Stock

20% off MSRP $ 124.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 99.99 USD

Add to Wish List

Qty

20% off MSRP

$ 124.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 99.99 USD

Add to Wish List

The GB40 is a compact lithium-ion battery jump starter pack capable of delivering 1,000 amps, allowing you to jump-start a dead battery within seconds. Equipped with patented safety technology, it ensures spark-proof connections and reverse polarity protection, making it user-friendly and safe for everyone. Not only does it serve as a powerful battery booster, but it also functions as a portable power source for charging USB devices such as smartphones and tablets. Designed to support vehicles like cars, boats, RVs, trucks, and more, it can handle gas engines up to 6 liters and diesel engines up to 3 liters.

Features:

Compact, yet powerful lithium jump starter rated at 1,000 Amps - up to 20 jump starts on a single charge.
An ultra-safe and mistake-proof design with spark-proof technology and reverse polarity protection, which allow it to safely connect to any battery.
An ultra-bright 100 lumen LED flashlight with 7 light modes, including SOS and emergency strobe.
Recharge your personal devices on the go, like smartphones, tablets, e-watches and more - up to 4 smartphone recharges.
Designed for gas engines up to 6 Liters and diesel engines up to 3 Liters for cars, boats, lawn mowers and more.

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less

VANOS Solenoid Actuator - 11367593719

T#:37655980

Part#: 11367593719

Ships on Aug 11, 2026

Sale - Save 16% $ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 32.07 USD

Add to Wish List

Qty

Sale - Save 16%

$ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 32.07 USD

Add to Wish List

This Solenoid Actuator is responsible for adjusting camshaft timing through precise phasing, ensuring optimal engine performance.

As a common culprit behind VANOS-related trouble codes, replacing this component can be expensive. Opt for a durable and cost-effective solution with a high-quality replacement from Bremmen Parts, designed to deliver reliable performance without breaking the bank.

Show More Show Less

Pure Turbos N55 PURE750 Turbo Upgrade - BMW N55 3.0L w/ EWG

For vehicles with production date from 07/2013

EWG models only

T#:13957909

Part#: N55PURE750EWG

In Stock

$ 3,107.99

This product was last offered at the strikethrough price on
07-13-2026

$ 3,107.00 USD

Add to Wish List

Qty

$ 3,107.00 USD

Add to Wish List

These PURE750 turbos from Pure Turbos are sure to give your car the extra oomph you're looking for! With easy installation and a stealth stock appearance! The craziness pursues with the possibility of 608whp with E30 and meth running 25psi but those numbers could reach upwards of 650+ with other upgrades! crazy. we know, which leaves this as one of the best stage 2 options for your N55!

Show More Show Less

URO Turbocharger Oil Feed Line - BMW N20 2.0L

T#:53079361

Part#: 11428678840

In Stock

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Supplies oil to the turbocharger, ensuring proper lubrication of the bearings.

1/2-inch Drive VANOS Flush-Cut 17mm & 18mm Sockets

T#:398953

Part#: 012016ECS0KTKT

In Stock

Sale - Save 3% $ 67.99

This product was last offered at the strikethrough price on
06-14-2026

$ 65.94 USD

Add to Wish List

Qty

Sale - Save 3%

$ 67.99

This product was last offered at the strikethrough price on
06-14-2026

$ 65.94 USD

Add to Wish List

Turbocharger Installation Kit

T#:598822

Part#: 11657625293KT3

Ships in 1-3 days

Sale - Save 9% $ 204.39

This product was last offered at the strikethrough price on
06-10-2026

$ 186.46 USD

Add to Wish List

Qty

Sale - Save 9%

$ 204.39

This product was last offered at the strikethrough price on
06-10-2026

$ 186.46 USD

Add to Wish List

Reusing old hardware and gaskets can often lead to oil and exhaust leaks. To prevent this, we have assembled this kit which includes all of the basic components needed to install a turbo upgrade or a re-built turbo on your N20.

Show More Show Less

Precision Raceworks Stage 3 Upgraded Fuel Injectors - Set Of 6 - BMW ...

T#:40004858

Part#: 201-0261

Ships on Aug 18, 2026

$ 1,799.00 USD

Add to Wish List

Qty

$ 1,799.00 USD

Add to Wish List

The Precision Raceworks N55/S55 Upgraded DI Injectors are designed for customers looking to push the limits without port injection (or in addition to port injection). Our high flow injectors were developed in a partnership with NHP, taking advantage of resources offered by both companies to produce the highest quality and highest flowing direct injector upgrade ever for the N55 engine. These high flow injectors flow 85% over stock! Each injector is tested and calibrated using state of the art high pressure flow calibration equipment and then matched to a set of 6. Installation of these is a snap and is as simple as replacing your injectors, a little coding, and then checking a checkbox!

Show More Show Less

ARP ARP2000 Head Stud Kit - N55

T#:42335661

Part#: ARP-HSK-N55-S

In Stock

$ 699.99 USD

Add to Wish List

Qty

$ 699.99 USD

Add to Wish List

Enhance your BMW N55 engine's ability to handle higher levels of boost with 5150's custom-designed Head Stud Kit from ARP, the global leader in fastener technology!

Hella Hella Horn - Low Tone

T#:590880

Part#: 2768082

In Stock

$ 36.99 USD

Add to Wish List

Qty

$ 36.99 USD

Add to Wish List

Disc Type Low-Tone, 12 V, 335 Hz with Bracket

Bosch Flow Matched EV14 Injectors - US CAR Connector (EV6) - 950cc - ...

NOT A DIRECT REPLACEMENT FOR FACTORY INJECTORS - For use with aftermarket port injectio...

T#:47679242

Part#: 501-0082

In Stock

$ 572.99 USD

Add to Wish List

Qty

$ 572.99 USD

Add to Wish List

The Black Market Parts Genuine Bosch Motorsports EV14 fuel injectors featuring USCAR (EV6) connector matched and packaged in a pack of 6 units. Direct plug-in for Motiv Reflex, AIC, and Nexsys Motorsports

Show More Show Less

OEM Febi Eccentric Shaft - BMW N55 S55 3.0L

We Price Match - Give Us A Call or Chat!

T#:31522948

Part#: 11377589883F

In Stock at Vendor

$ 1,014.99

This product was last offered at the strikethrough price on
05-04-2026

$ 910.74 USD

Add to Wish List

Qty

$ 910.74 USD

Add to Wish List

The eccentric shaft is an important component of BMW's Valvetronic system, a form of variable valve lift control. If the teeth on the gear or the lobes have worn out, this can result in improper valve lift, decreased or abnormal performance, and even damage to cylinder head components. Replace your eccentric shaft with this high-quality part from OEM Febi to restore performance and eliminate valve lift issues without the marked-up price of a Genuine BMW eccentric shaft.

Show More Show Less

Ferrea High Performance Valve Spring Kit for BMW N55/S55

T#:23416526

Part#: FER-HPVSK-N55

Ships in 3 Business Days

$ 1,049.99 USD

Add to Wish List

Qty

$ 1,049.99 USD

Add to Wish List

Maximize your N55 or S55 engine's performance with Ferrea Valve Springs and Retainers, precision components crafted from chromoly alloy. These springs undergo special thermal treatment, ensuring exceptional durability even in extreme racing conditions. Addressing issues like valve binding, breakage, and float, Ferrea valve springs are meticulously heat-treated and stress-relieved, providing stability for high-lift and high-RPM racing engines while minimizing load loss. Precision CNC machined titanium retainers offer superior strength and stability. Ferrea's Spring Seat Locators, made from 4140 chromoly alloy, guarantee precise tolerances and a flat, parallel spring pad with a hard Nitride surface treatment for exceptional toughness and anti-wear characteristics. Please note that installation requires the expertise of an engine builder.

Show More Show Less

F3X/F2X - B58 Silent EKP PNP Cooler Kit - 40mm Noctua Fan

A Must For Cars With Upgraded LPFPs

T#:26471614

Part#: AT232F22BLA40MB5

Ships in 1 Business Day

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

A Must For Cars With Upgraded LPFPs The full plug-and-play EKPM3 cooler kit is designed specifically for F22/F30/F31/F34 BMWs using an EKPM3 fuel pump control module. This is recommended for anyone using a low-pressure fuel pump that is larger than the OEM fuel pump. We designed this kit with the help of Island Racewerks. The cooler housing is designed to fit over the EKP module just like the OEM housing and fits with plenty of room in the stock EKP location. The housing is 3D printed using durable PLA+. The full kit is printed and assembled in the U.S.A. by Arc Terminator LLC. Full Kit Contents: 1x EKPM3 Cooler Housing With a single 40mm Noctua Fan 1x 14x14x6mm Heatsink With Thermal Tape 1x 14x9x5mm Heatsink With Thermal Tape 1x 9x9x5mm Heatsink With Thermal Tape (EKPM3 Kit) 4x 4" Zip Ties 1x Alcohol Wipe 1x 2 Amp Mini Blade Fuse Why this kit exists: The EKPM3 and EKPM2 have been shown to overheat and cause vehicle shutdown issues when larger fuel pumps that draw more current than OEM are used. This shutdown comes from critical components on the EKPM3 and EKPM2 overheating when larger current draws are coming from the fuel pump. The PNP kit comes with heatsinks for the most heat-sensitive and heat-producing components in the EKPM3 / EKPM2 to further increase cooling effectiveness. When paired with a potent 5015 blower fan that directs a large amount of airflow through the cooler housing, the EKPM3 / EKPM2 stays significantly cooler, which prolongs the life of the module. We also recommend anyone using a larger fuel pump than OEM to properly code their EKP module with Pro-Tool's built-in "Voltage Fix" feature.

Show More Show Less

Valve Cover Gasket Kit - BMW N20

T#:30164647

Part#: 11127507217KT2

Ships in 1 Business Day

$ 73.99 USD

Add to Wish List

Qty

$ 73.99 USD

Add to Wish List

Maintaining proper oil levels in your engine is crucial for peak performance. Undetected leaks can cause your oil to drop to dangerously low levels between oil changes, leading to severe engine damage.

One common culprit for oil leaks is the valve cover. Over time, exposure to extreme temperature fluctuations can wear down the gaskets, causing them to fail. Prevent oil leaks and protect your engine by replacing these vital components.

Comprehensive Kit Includes:

Valve Cover Perimeter Gasket Vacuum Pump Seal Valvetronic Actuator Seal HPFP Screws (2) Replace your old gaskets with our high-quality kit to keep your engine running smoothly and efficiently.

Show More Show Less

Vargas Billet B58 Vacuum/Boost Adapter - B58 3.0L

T#:638811

Part#: VTT-B58-VACCUM

Ships in 10 Business Days

Starting at $ 52.99 USD

Add to Wish List

Starting at $ 52.99 USD

Add to Wish List

Vargas Turbo has released their very own BMW B58 vacuum/boost adapter. These go inline with the intake manifold fitting and provide a full boost/vacuum signal from the manifold. This fitting adds two 1/8" NPT bungs to accept any fitting that has 1/8" NPT threads. You can choose three configuration options: Fitting by itself Fitting with one 1/4" barb and one plug Fitting with two 1/4" barbs Once installed it tucks perfectly under your engine cover. These are perfect for running your PI switch off manifold pressure, which is much more accurate than the charge pipe, and they are also great for BOVs running the proper size line without having to drill a hole in your manifold. These do space out any sensors etc giving inaccurate readings like some of the other brands do.

Show More Show Less

Endurance Series AGM Battery - B48-H6-L3

T#:36947237

Part#: B48-H6-L3

Ships in 4 Business Days

$ 398.99 USD

Add to Wish List

Qty

$ 398.99 USD

Add to Wish List

ARP Cylinder Head Stud Kit - Custom Age 625+ - BMW B58 3.0L

T#:25241791

Part#: B58-CA-203-4706

In Stock at Vendor

20% off MSRP $ 1,027.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 822.99 USD

Add to Wish List

Qty

20% off MSRP

$ 1,027.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 822.99 USD

Add to Wish List

The Custom Age 625+ is made from a material that has a tensile strength of 260 ksi, which is substantially higher than the 190 ksi of the ARP 2000 head stud. It's an ideal choice for individuals who want to push the limits of their B58 builds and require a stronger head stud.

Show More Show Less

OEM Bosch Rear Oxygen Sensor - N20 N26

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:384616

Part#: 11787589122

In Stock

$ 168.99

This product was last offered at the strikethrough price on
05-07-2026

$ 111.99 USD

Add to Wish List

Qty

$ 111.99 USD

Add to Wish List

A new oxygen sensor can improve driveability and lengthen engine life. Ultimately, you achieve a smoother running engine that is more fuel efficient. Feedback from the oxygen sensor provides closed-loop control of the injected quantity of fuel for optimum air-fuel mixture, enabling virtually complete combustion to take place. Contaminants in gas and certain atmospheric conditions can drastically shorten the life of any oxygen sensor, therefore they should be checked with every periodic maintenance and changed if necessary.

This is the OEM Bosch oxygen sensor for BMW's with the N20 and N26 motors. This sensor is mounted in the catalytic converter in the rear most position. OEM replacement for BMW # 11787589122.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Fits the following BMWs:
All models with the N20 or N26 motor

Show More Show Less

VTT N5X/S55/N2X Billet BMW Oil Filter Housing Cap - Clear - BMW N52 N...

T#:5122266

Part#: VTTFILTERCAPCLR

Ships in 1 Business Day

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized

Show More Show Less

407 Piece O-Ring Assortment

T#:1809147

Part#: W5202

In Stock at Vendor

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

Nitrile Butadiene Rubber

Solenoid Actuator For Vanos System

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:35863156

Part#: 11367593719

Ships in 1 Business Day

$ 37.99 USD

Add to Wish List

Qty

$ 37.99 USD

Add to Wish List

Adjusts valve timing through cam phasing.

Rein Turbocharger Oil Return Line

2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:17771585

Part#: 11428626653

In Stock at Vendor

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

Rein OE quality return pipe is manufactured with premium rubber and is designed to be a direct-fit replacement.

BM3 FlexFuel Kit - OEM Fuel Hat Location - BMW F-Series S55/N55 3.0L ...

T#:33746522

Part#: BM3FFKTF55

Ships in 10 Business Days

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

We are proud to bring out this truly awesome product that makes getting the required Flex Fuel hardware on your BMW and A9X Supra with incredible ease and minimal effort, in your own driveway.

Our kit is entirely plug-and-play with the factory vehicle harness. No cutting or splicing of OEM wiring/connectors. It installs in minutes and can be removed without a trace on the car!

Our team used SolidWorks to design a Flow Optimized Flex Fuel Sensor Adapter (FFSA) to ensure fuel flow is unobstructed and with no added pressure drop at full fuel pump flow from the fuel tank to your motor when our kit is installed. This is important when pushing the factory fuel system with all the power Ethanol can provide over petrol!

Flex fuel sensor housing is designed to neatly install into the factory BMW fuel hat location.

Flex Fuel Sensor Adapter also contains two 1/8 NPT ports that allow installation of an auxiliary Fuel Pressure sensor for vehicles that don’t come with an OEM one from the factory for future use. Depending on fitment, either port can be used.

Install the bootmod3 Flex Fuel Plug and Play Kit and flash your flex fuel enabled bootmod3 OTS MultiMap or Custom Map in minutes and you’re off to the races never worrying about alcohol/petrol blend % in your fuel tank. It does not get better or easier than this!

bootmod3 FlexFuel Plug and Play Kit:

Minutes to install at home as opposed to hours at a shop with car up on lift fabricating/cutting into factory fuel lines and splicing/cutting/pinning into OEM electrical
4+ hours in time/cost savings to get going on Flex Fuel as compared to most other kits that require making custom fuel lines, fittings and custom wiring!
Fully reversible/removable and back to stock without a trace in minutes
Custom 3-piece Aluminum-6061 Flex Fuel sensor adapter with built-in sensor bypass to allow for obstruction free fuel flow made to fit in the vehicle factory fuel hat area below the rear seat
All connecting points sealed with fuel safe Viton o-rings
Flex Fuel Sensor Adapter housing provides additional 1/8 NPT ports for optional Fuel Pressure sensor addition to vehicles without a factory one for bootmod3 CustomROM v2 support
CANBUS Enabled Ethanol Content Analyzer (ECA) that integrates with bootmod3 CustomROM for complete and seamless conversion of your BMW to FlexFuel for bootmod3 Flex Fuel enabled OTS MultiMaps and custom tunes with your bootmod3 tuner of choice
Power/CANBus 4-wire plug and play harness
- 100% Fully Plug and Play harness to the BMW Fuel Controller connectors (EKP3) on S55, N55 vehicles
- 100% Fully Plug and Play harness on the BMW Body Domain Controller (BDC/FEM) connector on Gen1 F-series B48/B58
Continental Flex Fuel sensor 3-wire harness
Custom Aluminum-6061 CANBus Enclosure for the bootmod3 ECA board
Custom, kink-free teflon braided line allowing plug and play installation with the OEM fuel hat and factory 5/16” or 3/8” fuel feed line. No cutting or new lines required.
-6 AN fitting by Racetronix

OEM FUEL HAT LOCATION KIT IS INTENDED FOR OEM FUEL PUMP AND ASSOCIATED WIRING. ANY VARIATIONS TO FUEL LINES OR FUEL PUMPS MAY NOT BE COMPATIBLE. USE THE ENGINE BAY INSTALLATION KIT WHERE AVAILABLE INSTEAD.

Show More Show Less

ReFlex+ Plug-N-Play Harness Kit - Tensility Motorsport

T#:29201085

Part#: 200.1058

Ships in 1 Business Day

$ 794.00 USD

Add to Wish List

Qty

$ 794.00 USD

Add to Wish List

Tensility Motorsports has developed a plug and play kit for the ReFlex+ that was engineered to meet our high quality standards. TMS has been approved by MOTIV to manufacturer harnesses and they will not void your warranty on MOTIV ReFlex+ products.Â With attention to detail in the selection of wiring, production standards, and quality assurance, TMS plug and play harnesses ensure a consistent and reliable installation for a hassle-free experience. Each harness kit includes all the necessary components to install and run a ReFlex+ Advanced I/O Controller on the vehicle it was designed for. The harness is divided into a few separate pieces for ease of installation and a very clean finished look. Main Harness: This section of the TMS harness kit includes plug and play connections to the vehicles Cam, Crank, and TMAP sensors, 6 injector runs for port injection, the ethanol content sensor connector, and DTM connections for all of the auxiliary inputs and outputs. CAN+ Power Splitter: A clean over-molded compact harness that provides a plug and play connection to your vehicles Body Domain Controller. This section is where the kit will get power, ground, and connect to the CANbus network. Auxiliary Cable Pack: Four additional cables are included to simplify future expansions such as additional sensors, methanol, NOS, fuel pump relays, etc. These 8 ft. cables plug directly into the unused ReFlex+ harness auxiliary ports Aux Out 1/2/3 and Aux In 4 (PSI).

Show More Show Less

M54/S54/N52/N54/N55 IP High Performance Ignition Coil Set

T#:1637696

Part#: IP-A122609

Ships in 3 Business Days

$ 1,055.00 USD

Add to Wish List

Qty

$ 1,055.00 USD

Add to Wish List

Ignition Projects is a Southern California based company that specializes in innovative ignitions products. Their mission is to develop stronger ignition systems in order to optimize engine performance and improve emmissions/consumption. All of their products are developed and manufactured here in Tustin, CA, right here in the US!

Show More Show Less

N55/S55 Manley 37cc Platinum Series Dish Piston Set

T#:17073609

Part#: 647000C-6

In Stock at Vendor

8% off MSRP $ 1,208.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,111.99 USD

Add to Wish List

Qty

8% off MSRP

$ 1,208.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,111.99 USD

Add to Wish List

Upgrade the performance of your BMW N55/S55 3.0L engine with the Turner Motorsport Manley 37cc Platinum Series Dish Piston Set. Crafted from high-strength 2618 material, these pistons offer exceptional durability and reliability. The offset wrist pin design ensures quiet start-ups, while the inclusion of both Premium Chrome Moly and 9310 alloy .210” wall pins caters to varying needs. The pressure balance groove, compatibility with +1mm valve sizes, and premium steel top rings with Napier seconds and round wire locks make these pistons a top-notch choice. With a recommended piston clearance of .0035”, measured .850” from the bottom of the oil ring, these pistons guarantee optimal performance for your BMW engine.

Manley 37cc Platinum Series Dish Piston Set for BMW N55/S55 3.0L engine.
High-strength 2618 material for exceptional durability.
Offset wrist pin for quiet start-ups.
Includes both Premium Chrome Moly and 9310 alloy .210” wall pins.
Pressure balance groove for enhanced performance.
Accommodates +1mm valve sizes for customization.
Premium steel top rings with Napier seconds and round wire locks included.
Recommended piston clearance of .0035” ensures optimal engine function.

Enhance your BMW's engine with the Turner Motorsport Manley 37cc Platinum Series Dish Piston Set, delivering reliability and performance.

Show More Show Less

ARP Cylinder Head Stud Kit - ARP2000 - BMW B58 3.0L

T#:1105898

Part#: 201-4701

In Stock

20% off MSRP $ 459.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 367.99 USD

Add to Wish List

Qty

20% off MSRP

$ 459.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 367.99 USD

Add to Wish List

For engine builders crafting a high-performance powerhouse, the ARP Cylinder Head Stud Kit is the industry-standard choice for reliability and strength. Each kit features studs, nuts, and washers manufactured from ARP’s proprietary ARP2000 alloy, a material rated far superior to standard aircraft-quality steels.

Show More Show Less

3/8" Dr. 5/8" Extended Spark Plug Socket

T#:2242226

Part#: W80533

Ships in 1 Business Day

$ 20.25 USD

Add to Wish List

Qty

$ 20.25 USD

Add to Wish List

Extended socket length reaches confined areas.

BMW B58 Magnetic Billet Oil Filter Housing Cap - Clear Anodized ...

T#:5269540

Part#: OILCAPB58CLEAR

Ships in 5 Business Days

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

Paradigm Engineering’s B58 oil filter housing cap directly augments your vehicle's oil filtration system and serves as a diagnostic tool. Each B58 oil filter cap is CNC milled from a solid block of billet aluminum and fitted with a Nickel plated neodymium rare earth magnet. This magnet is in direct contact with pre-filtered oil, as a result, the magnet will naturally capture Ferrous particles within your engine oil. Ferrous particles in engine oil cause premature wear, obstruct the paper oil filter and could be an indication of a serious issue within your engine.

Show More Show Less

Mishimoto 19 Row Universal Oil Cooler

For custom applications only. Not a direct bolt on.

T#:378414

Part#: MMOCUL

In Stock at Vendor

$ 536.99 USD

Add to Wish List

Qty

$ 536.99 USD

Add to Wish List

Even under optimum driving conditions increased oil temperatures will cause a drop in pressure and will decrease the ability for your engine to be properly lubricated. With this new oil cooler, you can keep your oil temperatures down for optimum driving conditions. The kit includes four-feet of stainless braided line, adapter fittings, and oil filter sandwich adapter. Rows: 19 Overall Dimensions: 13" x 5.5" x 2" Core Dimensions: 11.25" x 5.5" x 2" Braided Hoses: 4ft .75 inch & 4ft 9 inch Braided Hose Fittings: -10AN Sandwich Plate Fittings: -10AN WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

BMW E60 M5 Crank Case Test Cap

T#:6924319

Part#: AGA-6061-TC

Ships in 7 Business Days

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

BMW E60 M5 Crank Case Test Cap

The BMW E60 M5 Crank Case Test Cap is designed to facilitate accurate testing of crankcase pressure across a range of vehicle models. This versatile test cap is compatible with early and late model vehicles equipped with steel, aluminum, or plastic valve covers. Featuring a multi-diameter fitting, it connects directly to IMIBs, handheld manometers, and smoke machines, eliminating the need for adapters and ensuring precise readings without leaks.

Benefits:

Versatile Compatibility: Suitable for use with steel, aluminum, and plastic valve covers on early and late model vehicles.
Direct Connection: Multi-diameter fitting allows direct connection to IMIBs, handheld manometers, and smoke machines.
Leak Prevention: Eliminates the need for adapters, reducing the risk of leaks and inaccurate readings.
Enhanced Accuracy: Provides reliable crankcase pressure testing for better diagnostic results.

Show More Show Less

OEM VDO Camshaft Position Sensor - BMW B48/46 B58 N20/26

We Price Match - Give Us A Call or Chat!

T#:19197278

Part#: 13627633958

In Stock at Vendor

$ 115.99 USD

Add to Wish List

Qty

$ 115.99 USD

Add to Wish List

Camshaft position sensors are electrical sensors that monitor the rotational speed and position of a camshaft. This signal is used by the DME to control fuel delivery and spark timing. If your camshaft position sensor is faulty, it can result in check engine lights, rough idle or running conditions, limp mode, or no starts. Replace your cam position sensor with this high-quality replacement to restore smooth engine operation.

Show More Show Less

Corteco Engine Mount - Right - F22, F30, F31, F32, F33, F34, F36 ...

T#:556322

Part#: 22116855456

Ships in 2 Business Days

$ 113.99

This product was last offered at the strikethrough price on
03-10-2026

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

Reduce driveline vibrations with a new motor mount

Deluxe Compression Tester

T#:585065

Part#: OTC5605

Ships in 6 Business Days

$ 349.99 USD

Add to Wish List

Qty

$ 349.99 USD

Add to Wish List

The only way to check compression is with a compression tester like this one.

Vargas Burnt Titanium Magnetic Oil Drain Plug - M12 X 1.5

T#:51813315

Part#: VTT-TI-DRAIN

Ships in 10 Business Days

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

The VTT Burnt Titanium Magnetic Oil Drain Plug is a critical upgrade for any performance enthusiast looking to maximize engine longevity.

VTT F Series B58 Engine Catch Can - W/ -6 Drain Valve

T#:18236100

Part#: VTTB58CATCH1

Ships in 10 Business Days

$ 377.99 USD

Add to Wish List

Qty

$ 377.99 USD

Add to Wish List

VTT is proud to present our F Series B58 engine catch can setup. This kit includes our renowned modular catch can, a precision CNC-machined 6061 aluminum bracket, VTT CNC banjo fittings, robust 5-ply silicone hoses, and push-lock fittings. Installation is simple and takes approximately 30 minutes to 2 hours, depending on your experience, requiring the replacement of just one factory hose with the provided VTT hoses. The result is a clean, OEM-quality fit and finish. What distinguishes our kit from others is the use of high-quality AN fittings and VTT’s custom banjo adapters, delivering unmatched durability and performance.

Show More Show Less

Piston Ring Comp 3-1/2" to 7"

T#:2242223

Part#: W80573

Ships in 1 Business Day

$ 22.99 USD

Add to Wish List

Qty

$ 22.99 USD

Add to Wish List

Use to install pistons on most passenger cars and truck engines

CENTRAL VALVE VANOS

T#:528041

Part#: 11368617694

Ships in 1-2 days

6% off MSRP $ 212.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 199.99 USD

Add to Wish List

Qty

6% off MSRP

$ 212.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 199.99 USD

Add to Wish List

Genuine BMW Oil spray nozzle - N55 3.0L

T#:34782

Part#: 11377583786

In Stock

2% off MSRP $ 43.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 42.99 USD

Add to Wish List

Qty

2% off MSRP

$ 43.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 42.99 USD

Add to Wish List

Genuine BMW Oil Spraying Nozzle -
This item fits the following BMW Chassis:
E71,E82,E89 Z4,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N20,N26,N55,S55

Show More Show Less

Genuine BMW Fuel Tank Breather Line - 13907643103

T#:222881

Part#: 13907643103

Ships in 1-2 days

4% off MSRP $ 73.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 70.99 USD

Add to Wish List

Qty

4% off MSRP

$ 73.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 70.99 USD

Add to Wish List

A faulty fuel tank breather has the potential to disrupt the operation of the fuel pump, leading to issues such as the engine not running properly. Typically, when this occurs, an engine code triggers the Check Engine light, indicating the need for this specific repair.

Show More Show Less

ACTUATOR

T#:528042

Part#: 11377643073

Ships in 1-2 days

5% off MSRP $ 619.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 591.99 USD

Add to Wish List

Qty

5% off MSRP

$ 619.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 591.99 USD

Add to Wish List

Genuine BMW High-Pressure Fuel Pump - N20 N26 2.0L

T#:194709

Part#: 13518604229

Ships in 1-2 days

4% off MSRP $ 1,292.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,234.99 USD

Add to Wish List

Qty

4% off MSRP

$ 1,292.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,234.99 USD

Add to Wish List

This is the high-pressure fuel pump for BMW's with the N20 turbo engine. When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Genuine BMW High-Pressure Pump -
This item fits the following BMW Chassis:
E89 Z4,F10,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36

Fits BMW Engines including:
N20,N26

Show More Show Less

Genuine BMW Torque Angle Meter

T#:170181

Part#: 83300490504

Ships in 1-2 days

$ 207.99 USD

Add to Wish List

Qty

$ 207.99 USD

Add to Wish List

Genuine BMW Torque Wrench - No. 009120

Genuine BMW N55 3.0L Engine Oil Cooler Lines - 17227639450

T#:47037

Part#: 17227639450

Ships in 1-2 days

6% off MSRP $ 349.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 328.99 USD

Add to Wish List

Qty

6% off MSRP

$ 349.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 328.99 USD

Add to Wish List

Genuine BMW Engine Oil Cooler Lines -
This item fits the following BMW Chassis:
F30,F32,F33,F34,F36

Fits BMW Engines including:
N55

Genuine BMW Adjustment Unit - outlet Camshaft

T#:34660

Part#: 11367583208

Ships in 1-2 days

3% off MSRP $ 674.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 657.99 USD

Add to Wish List

Qty

3% off MSRP

$ 674.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 657.99 USD

Add to Wish List

Genuine BMW Adjustment Unit, Outlet Camshaft -
This item fits the following BMW Chassis:
E70 X5,E71,E82,E83 X3,E85,E86,E89 Z4,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N51,N52,N52N,N55,S55

Show More Show Less

Genuine BMW Set Bolt Cylinder Head - N55

T#:22172

Part#: 11122165470

Ships in 1-2 days

6% off MSRP $ 125.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 118.00 USD

Add to Wish List

Qty

6% off MSRP

$ 125.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 118.00 USD

Add to Wish List

Genuine BMW Set Bolt Cylinder Head - Torx
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36

Fits BMW Engines including:
N55

Show More Show Less

Genuine BMW Acoustic Foam - 11127636790

T#:180977

Part#: 11127636790

Ships in 1-2 days

5% off MSRP $ 86.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 82.99 USD

Add to Wish List

Qty

5% off MSRP

$ 86.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 82.99 USD

Add to Wish List

Over time, the sound-deadening foam will decay and start falling apart keeping it from being as sound canceling as it originally was. Replace it to get its full potential. Genuine BMW Acoustic Foam - This item fits the following BMW Chassis: E89 Z4,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36 Fits BMW Engines including: N20,N26

Show More Show Less

Genuine BMW High Pressure Fuel Pipe - N55 3.0L

T#:42221

Part#: 13537576776

Ships in 1-2 days

4% off MSRP $ 116.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 111.99 USD

Add to Wish List

Qty

4% off MSRP

$ 116.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 111.99 USD

Add to Wish List

Genuine BMW High Pressure Pipe -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F25 X3,F26 X4,F30,F34

Fits BMW Engines including:
N55

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW 4 Series F33 (2014+)

Sub-Categories

BMW E60 M5 Crank Case Test Cap

Benefits:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results