BMW Intake Parts for BMW 4 Series F33 (2014+)

Replacement N55 Performance Filter from Burger Motorsport

Enhance your BMW's performance with the Replacement N55 Performance Filter from Burger Motorsport. Specifically designed for N55 engines, this filter optimizes airflow, leading to increased horsepower and torque. Enjoy improved throttle response and fuel efficiency, all while protecting your engine from harmful contaminants.

Key Features:

• Designed for N55 engines
• Optimizes airflow for increased power
• Improves throttle response and fuel efficiency
• Protects engine from contaminants

Bring your aFe filter back to life with a Restore kit from aFe. Included is filter cleaner & replacement oil. These air filter oils is designed to not harm MAF sensors, while allowing the filter to catch as much debris as possible.

Used for Pro 5 R filters

BMW F3X B46 B48 B58 Air Filter - Dinan High Flow Drop-in Replacement is designed to enhance engine performance and reduce maintenance costs. This high-flow, washable air filter provides improved airflow, allowing your BMW engine to breathe better and produce more power without additional strain.

• Increased Engine Performance: Improves airflow for better power output and efficiency.
• High-Quality Materials: Made from premium, high-flow materials to ensure optimal engine breathing.
• Washable and Reusable: Reduces long-term maintenance costs with a filter that can be cleaned and reused.
• Easy Installation: Drop-in design for a straightforward replacement without modifications.
• Cost-Effective Upgrade: A great alternative to a full intake system for a performance boost.

BMW B58 Replacement Filter For High Flow Carbon Fiber Intake is designed to enhance the performance of BMW's B58 engine by providing superior filtration and airflow. This high-quality replacement filter is engineered for use with high-flow carbon fiber intakes, ensuring optimal engine performance and longevity.

• Enhanced Airflow: Increases the volume of air entering the engine for improved horsepower and torque.
• Superior Filtration: High-performance filtration media traps contaminants while allowing maximum airflow.
• Durable Construction: Crafted with high-quality materials for long-lasting performance and reliability.
• Easy Maintenance: Designed for straightforward replacement, maintaining the efficiency of your high-flow intake system.
• Perfect Fit: Specifically engineered for the BMW B58 engine, ensuring compatibility and performance.

This replacement filter is a vital component for BMW enthusiasts looking to maximize the efficiency and effectiveness of their high-flow carbon fiber intake systems.

In BMW's with the B46 engine, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with a new high flow inverted performance cone filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and the turbo spooling!

**B46 Engine (Forward facing, intake on the left) - (B48 Intake)**

Upgrade your OEM Gen1 B58 BMW charge pipe with our durable aluminum replacement, designed to prevent charge pipe failure.

Crafted from high-quality aluminum with a glossy black powder coat finish, this replacement charge pipe boasts CNC machined flanges, optional 1/8" NPT methanol bungs, and OEM-style mounting hardware for a seamless fit. It also features a vent-to-atmosphere blow-off valve flange for enhanced integration and performance.

The kit includes:

BMS Elite Aluminum Charge Pipe TurboSmart Race-Port BOV (3) 1/8" NPT Bung Plugs with Thread Sealer (1) 3" to 2.5" Silicone Reducer Coupler (2) 1/8" NPT to 1/4" Push-lock Fittings (1) 1/4" Push Tube Line (1) B58 Boost Tap Adapter Associated Hardware (Clamps, O-rings, Screws)

The Dynamic Air Scoop (D.A.S.) from aFe Power is a very simple, bolt-on product that increases air flow and velocity through the factory kidney bean grille. This lightweight rotomold intake scoop is black for a stealth appearance. You will notice the improved throttle response as the speed of your intake air flow is increased.

This scoop is a perfect addition to an aFe Stage 2 Sealed intake system part number 54-82202 and 51-82202. All necessary hardware is included.

Following in the footsteps of its big brother on the B58 engine, the 4 cylinder intake takes the same path to success. Improve upon the factory design by increasing flow via a larger airbox and filter element thereby improving throttle response and lessening the strain on the turbocharger for maximum efficiency. While box and filter enlargement and redesign is a major factor in ultimately producing a more potent intake they are not the only variables in creating a more efficient design either. The devil is in the details which is where Dinan thrives. Coupled with maintaining Dinan's standard practice of utilizing a sealed system to ensure as much cold, outside air as possible is employed Dinan engineers focused their attention on the intake pipe itself where numerous improvements could be made. In factory configuration, the intake tube comes complete with baffling and a small helmholtz chamber to reduce unwanted sound. As a byproduct, these features also cause a more turbulent air flow path which robs the factory system of potential power. These 2 specific details are diametrically opposed to our intended markets desires so the removal of these features was paramount. Through numerous iterations, a carbon fiber intake tube was developed that eliminated flow disruptions and allowed the natural sound of an unimpeded intake tract to sing. All told this thorough methodology of design allows the Dinan carbon fiber cold air intake for the B46/B48 engine to elicit gains of 6 HP and 6 TRQ at 5000 RPM on a completely stock vehicle. An impressive feat on today's turbocharged engines.

Not to be outdone by the performance side of the equation the B46/B48 intake also is completely made up of carbon fiber unlike 4 cylinder intakes of the past where a mix of materials was used. Not only is the intake completely carbon construction but the quality of the material has been improved over previous generations as well. While looks are surely important, and this piece has that department covered in spades, the improved construction and coating also guarantee that the appearance of the engine bay with the Dinan intake will not be marred over time. Built to present well, perform well, and last the duration, the Dinan B46/B48 carbon fiber cold air intake is a modification that is a must for any high-performance build.

Benefits of the Dinan Carbon Fiber High Flow Air Intake for the F22/F23 230i, F30/F31/F34 330i, and F32/F33/F36 430i:

More Power: +6 HP & +6 lb-ft of torque at 5000 RPM
Sportier Sound
Improved throttle response
Larger volume air box (30% larger than stock) that completely seals
34% increase in filter area (stock: 76.3in², Dinan: 102.1in²)
Optimized carbon fiber intake tube
Free flowing injection molded Air Mass Meter housing (over 20% larger than stock)
Quick and easy installation

This is a drop-in stock replacement aFe performance air filter that installs into your BMW's factory airbox. This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

Fits in vehicles with the following engines: B46 2.0L, B58 3.0L

HP Gain: +13hp
Trq Gain: +13ft-lbs
Airflow: +28% over stock

aFe has engineered the Momentum GT intake to outperform the stock air box and deliver substantial power and torque gains over the factory system. The B58 3.0L Turbo benefits from aFe's oversized cotton filter element in a Rotomold plastic housing that blocks heat saturated air while flowing more volume of cooler dense air. The system has been CAD designed to achieve the maximum volumetric flow rate into the turbo. The intake tube is a smooth, unobstructed single piece from the air inlet to the airbox and incorporates a port for the air flow sensor. aFe's advanced engineering and design have made this a direct bolt-in intake upgrade.

The aFe filter has been designed specifically for this application and uses aFe's high flow/low maintenance design. The ProDry S filter has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe Pro5R filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

Features:

• +13 HP and +13 lbs. x ft. Torque max gains
• Outflows factory intake by up to 28%
• High Quality One-Piece Roto-Molded Sealed Housing with Auxiliary Air Scoop
• CAD-Designed Roto-Molded Intake Tube
• Lightweight high gloss, clear-coated 2 x 2 twill-weave carbon fiber trim on housing for styling
• Built-In Sight Window Provides Easy Inspection of Filter Without Disassembly
• Pro 5R oiled 5-Layer Progressively Finer Mesh Cotton Gauze Oiled Media for Maximum Performance
• Unique (Patent Pending) Filter-to-Housing Interface for Easy Installation
• No Cutting or Drilling on factory Parts for Faster Installation

This Stage 2 cold air intake system produces 11 max horsepower, 15 lbs. x ft. torque and out-flowed the factory intake by 38%. This system includes a durable powder-coated heat shield and features a washable/reusable conical Pro 5R air filter for maximum flow. This air filter is constructed with 100% polyurethane, for long life and multiple cleaning cycles. A huge one-piece mandrel bent wrinkle-black powder-coated intake tube, maximizes air velocity providing maximum performance and throttle response. This is a direct bolt-on kit and requires no cutting or drilling.

On turbocharged motors, the intake piping is put under constant pressure while the engine is running, and has to hold that pressure without leaking. Unfortunately the smallest amount of damage or defect on the intake hoses and the pressure can cause a leak, leaving you without proper boost pressure.  Replace your leaking pressure pipe and stop loosing boost.

Product Features and Specifications:

• +13 HP / +13 lbs. x ft. Torque max gains
• Automatic Transmission only
• Outflows factory intercooler tube by 18%
• Retains OE style throttle body and intercooler quick connect made from 6061-T6 Billet Aluminum
• 2-1/2" to 3" Cold-Side mandrel-bent aluminum tubing
• Powder-coated wrinkle-black for heat resistance
• 1/8" NPT ports, are provided for connecting pressure sensors or water methanol injection
• 5-Ply Polyester Reinforced Silicone coupling for strength
• Includes premium stainless steel clamps for a secure fit
• Works with OE intercooler
• Includes hardware for a hassle-free installation

For automatic transmission only 

If manual transmission please purchase T#397175