BMW 3 Series F34 (2014+)

AeroCatch Racing Hood and Body Panel Fasteners (Pair) - Better than h...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:340098

Part#: AEROCATCH

In Stock

$ 566.99

This product was last offered at the strikethrough price on
05-13-2026

Starting at $ 82.99 USD

Add to Wish List

Starting at $ 82.99 USD

Add to Wish List

As used by Turner Motorsport on our championship winning BMW race cars, the new aerodynamically efficient and aesthetically styled AeroCatch is setting new standards in hood fixing for the 21st century. Say goodbye to your standard hood pins -- these are better all around.

Show More Show Less

GSP CV Axle Assembly - Front Left - BMW F22/23 F3X xDrive

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:27238720

Part#: NCV27043

In Stock

$ 131.99 USD

Add to Wish List

Qty

$ 131.99 USD

Add to Wish List

GSP New CV Axles are made from only the finest materials using premium steel, boot, and grease. GSP CV Axles are designed to exceed the original equipment specifications.for a trouble free ride. FEATURES & BENEFITS Extensive quality control and testing process to ensure a long-lasting performance Heat-treated components provide premium strength, increased tensile, and extended service life GSP Silent Ride Technology OE designed and manufactured CV joints to provide a quiet ride Premium grade neoprene boots provide protection against dirt and debris in driving conditions Specially formulated moly grease for optimal performance at high temperatures High-quality stainless-steel clamps for heavy duty strength and durability Spline rolled for precise durable fitment GSP CV Axles are covered with a limited lifetime warranty SPECIFICATIONS ABS Tone Ring Included: No Boot Material: Neoprene Compressed Length: 550 Inboard Spline Quantity: 27 Prop 65 Yes/No: Yes Axle Nut Included: NO California Proposition 65: Yes Inboard Joint Type: Male Outboard Joint Type: Conventional

Show More Show Less

GSP CV Axle Assembly - Front Right - BMW F22/23 F3X xDrive

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:27238721

Part#: NCV27044

In Stock

$ 144.99 USD

Add to Wish List

Qty

$ 144.99 USD

Add to Wish List

GSP New CV Axles are made from only the finest materials using premium steel, boot, and grease. GSP CV Axles are designed to exceed the original equipment specifications.for a trouble free ride. FEATURES & BENEFITS Extensive quality control and testing process to ensure a long-lasting performance Heat-treated components provide premium strength, increased tensile, and extended service life GSP Silent Ride Technology OE designed and manufactured CV joints to provide a quiet ride Premium grade neoprene boots provide protection against dirt and debris in driving conditions Specially formulated moly grease for optimal performance at high temperatures High-quality stainless-steel clamps for heavy duty strength and durability Spline rolled for precise durable fitment GSP CV Axles are covered with a limited lifetime warranty SPECIFICATIONS ABS Tone Ring Included: No Boot Material: Neoprene Compressed Length: 841 Inboard Spline Quantity: 27 Prop 65 Yes/No: Yes Axle Nut Included: NO California Proposition 65: Yes Inboard Joint Type: Male Outboard Joint Type: Conventional

Show More Show Less

GSP CV Axle Assembly - Rear Left - BMW F22/23 F3X

For vehicles with Manual transmissions only

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:27238726

Part#: NCV27030

In Stock

$ 162.99 USD

Add to Wish List

Qty

$ 162.99 USD

Add to Wish List

GSP New CV Axles are made from only the finest materials using premium steel, boot, and grease. GSP CV Axles are designed to exceed the original equipment specifications.for a trouble free ride. FEATURES & BENEFITS Extensive quality control and testing process to ensure a long-lasting performance Heat-treated components provide premium strength, increased tensile, and extended service life GSP Silent Ride Technology OE designed and manufactured CV joints to provide a quiet ride Premium grade neoprene boots provide protection against dirt and debris in driving conditions Specially formulated moly grease for optimal performance at high temperatures High-quality stainless-steel clamps for heavy duty strength and durability Spline rolled for precise durable fitment GSP CV Axles are covered with a limited lifetime warranty SPECIFICATIONS ABS Tone Ring Included: No Axle Nut Length: 23 Axle Nut Thread Size: M24×1.5 Boot Material: Neoprene Compressed Length: 29.09 Inboard Spline Quantity: 27 Outboard Spline Quantity: 28 Axle Nut Included: Yes Axle Nut Socket Size: 36 Axle Nut Type: Hex California Proposition 65: Yes Inboard Joint Type: Male Outboard Joint Type: Conventional Prop 65 Yes/No: Yes

Show More Show Less

GSP CV Axle Assembly - Rear Right - BMW F22/23 F3X

For vehicles with Manual transmissions only

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:27238727

Part#: NCV27031

Ships in 3 Business Days

$ 140.99 USD

Add to Wish List

Qty

$ 140.99 USD

Add to Wish List

GSP New CV Axles are made from only the finest materials using premium steel, boot, and grease. GSP CV Axles are designed to exceed the original equipment specifications.for a trouble free ride. FEATURES & BENEFITS Extensive quality control and testing process to ensure a long-lasting performance Heat-treated components provide premium strength, increased tensile, and extended service life GSP Silent Ride Technology OE designed and manufactured CV joints to provide a quiet ride Premium grade neoprene boots provide protection against dirt and debris in driving conditions Specially formulated moly grease for optimal performance at high temperatures High-quality stainless-steel clamps for heavy duty strength and durability Spline rolled for precise durable fitment GSP CV Axles are covered with a limited lifetime warranty SPECIFICATIONS ABS Tone Ring Included: No Axle Nut Length: 23 Axle Nut Thread Size: M24×1.5 Boot Material: Neoprene Compressed Length: 793 Inboard Spline Quantity: 27 Outboard Spline Quantity: 28 Axle Nut Included: Yes Axle Nut Socket Size: 36 Axle Nut Type: Hex California Proposition 65: Yes Inboard Joint Type: Male Outboard Joint Type: Conventional Prop 65 Yes/No: Yes

Show More Show Less

South Bend Clutch K70526-02-SS-DXD-B-SMF

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles with production date from 2007

T#:14585007

Part#: K70526-02-SS-DXD

Ships in 2 Business Days

$ 1,302.99 USD

Add to Wish List

Qty

$ 1,302.99 USD

Add to Wish List

Drag racing requires a Single Mass Steel Flywheel to be included with each kit when the original design is Dual Mass Flywheel. This clutch package is built to handle heavily modified cars and is designed to function according to the specific needs of the 1/4 and 1/8 mile track. The pressure plate for this kit is SFI approved Race Cover engineered to disengage with less pedal travel shortening the shift time. Discs are a puck design, which reduces rotational mass, and are assembled with all high-carbon component pieces for maximum strength. The friction material used is Graphite impregnated Ceramic perfectly suited for drag racing because of its maximum friction coefficient, rapid heat dissipation and abrupt engagement characteristics. Recommended uses drag, pulling, and drifting.

Show More Show Less

South Bend Clutch Stage 3 Daily Driver Clutch Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles with production date from 2007

T#:14585010

Part#: K70526-02-SS-O-S

Ships in 2 Business Days

$ 1,074.99 USD

Add to Wish List

Qty

$ 1,074.99 USD

Add to Wish List

South Bend Clutch Stage 3 Daily Driver clutch kits are recommended for a single mass flywheel (SMF), when the original design is a dual mass flywheel (DMF). These clutch packages are designed for high-horsepower vehicles desiring a start performance similar to OE. The pressure plate is race-engineered (SS) and SFI-approved with a significant load increase over stage 1 and 2 pressure plates (+600-800 lbs.). Expect a pedal effort increase of 20 to 25 percent. Discs are assembled with heat-treated wear-resistant hubs, as well as drive plates and springs for high-load transfer and dependable operation. The sprung centers on the disc, in conjunction with the marcel fin between the linings, creating a dual dampening effect that simulates OE start performance. A performance organic friction material with a high metal content increases torque and rpm capability—and maintains low operating temperatures, which reduce wear and glazing. South Bend Clutch Stage 3 Daily Driver clutch kits are the perfect match for your high-performance street machine and occasional track use.

Show More Show Less

South Bend Clutch Stage 3 Endurance Clutch Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles with production date from 2007

T#:14585012

Part#: K70526-02-SS-TZ-

Ships in 2 Business Days

$ 1,171.99 USD

Add to Wish List

Qty

$ 1,171.99 USD

Add to Wish List

Engineered for HP modifications. This Heavy Duty Pressure Plate has an increased clamp load with little or no increase in pedal pressure. The Organic disc material has a high metal content that increases the coefficient of friction by two times over a stock lining and increases rotational strength up to a 12,000 RPM burst point. This clutch system maintains a stock feel while offering strength and durability. Stage 3 Endurance Clutch Kits: Recommended uses are daily and street with an emphasis on Rally and Endurance racing. Rated to hold 540lbs/ft of torque. Featuring a solid-hub center section for use with an aftermarket Single Mass Flywheel

Show More Show Less

Stage 2 Drag Clutch Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:25075810

Part#: K70526-02-HD-DXD

Ships in 2 Business Days

$ 1,171.99 USD

Add to Wish List

Qty

$ 1,171.99 USD

Add to Wish List

Engineered for HP modifications. This Heavy Duty Pressure Plate has an increased clamp load with little or no increase in pedal pressure. The Organic disc material has a high metal content that increases the coefficient of friction by two times over a stock lining and increases rotational strength up to a 12,000 RPM burst point. This clutch system maintains a stock feel while offering strength and durability. Stage 2 Drag Clutch Kits: Recommended for use on the track with an emphasis on Drag racing. Rated to hold 520lbs/ft of torque. Featuring a solid-hub center section for use with an OE dual-mass flywheel

Show More Show Less

South Bend Clutch Stage 4 X-Series Clutch Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles with production date from 2007

T#:14585013

Part#: K70526-02-SS-X-S

Ships in 2 Business Days

$ 1,367.99 USD

Add to Wish List

Qty

$ 1,367.99 USD

Add to Wish List

South Bend Clutch Stage 4 X-Series clutch kits are build-to-order clutch packages for vehicles modified to exceed Stage 3 hp parameters. The kits include a steel, single mass, SFI-approved flywheel for safety. The race-engineered pressure plate is modified for maximum plate load, and helps to deliver more transmittable torque, stability, extended life, and superior thermal resistance. The South Bend Clutch Stage 4 X-Series clutch kits provide noticeably better dynamics through higher clamp loads, when driving your vehicle to its limits. Order the Stage 4 X-Series clutch kit recommended for your specific vehicle and engine size. Features, items, and specs include: * Puck-style disc offered in sprung and un-sprung options * Graphite-impregnated ceramic or sintered iron friction material options * Torque ratings calculated at time of ordering * Engagement characteristics can be abrupt * Meticulous processing and advanced packaging materials

Show More Show Less

Stage 2 Endurance Clutch Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles with production date from 2007

T#:25075808

Part#: K7052602HDOCE

Ships in 2 Business Days

$ 948.99 USD

Add to Wish List

Qty

$ 948.99 USD

Add to Wish List

Engineered for HP modifications. This Heavy Duty Pressure Plate has an increased clamp load with little or no increase in pedal pressure. The Organic disc material has a high metal content that increases the coefficient of friction by two times over a stock lining and increases rotational strength up to a 12,000 RPM burst point. This clutch system maintains a stock feel while offering strength and durability. Stage 2 Endurance Clutch Kits: Recommended uses are daily and street with an emphasis on Rally and Endurance racing. Rated to hold 450lbs/ft of torque. Featuring a solid-hub center section for use with an OE dual-mass flywheel

Show More Show Less

Stage 3 Endurance Clutch Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles with production date from 2007

T#:366990

Part#: K03099SSTZ

Ships in 2 Business Days

$ 1,171.99 USD

Add to Wish List

Qty

$ 1,171.99 USD

Add to Wish List

The disc is designed for the special needs of a vehicle with circuit racing in mind. Kevlar friction material is used for its unique static to dynamic ratios of friction co-efficients at high energy levels. This translates to a perfect transition from one gear to the next. Discs are assembled with only performance components and equipped with torsion springs functioning as a damper between engine and gearbox. This kit uses the same Race Engineered SFI approved pressure plate as stage 3 daily package. Race engineered pressure plates deliver more transmittable torque and stability, longer life and superior thermal resistance. They also deliver noticeably better dynamics through higher clamp load when driving the vehicle to its limits. Stage 3 Endurance Clutch Kits: Recommend usages are Rally, endurance race, clubsport, autocross, street and daily Conservatively rated to hold 540lbs/ft of torque. Featuring a solid-hub center section for use with an OE dual-mass flywheel

Show More Show Less

Stage 3 Daily Clutch Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles with production date from 2007

T#:25075811

Part#: K7052602SSODMF

Ships in 2 Business Days

$ 1,074.99 USD

Add to Wish List

Qty

$ 1,074.99 USD

Add to Wish List

Engineered for HP modifications. This Heavy Duty Pressure Plate has an increased clamp load with little or no increase in pedal pressure. The Organic disc material has a high metal content that increases the coefficient of friction by two times over a stock lining and increases rotational strength up to a 12,000 RPM burst point. This clutch system maintains a stock feel while offering strength and durability. Stage 3 Daily Clutch Kits: Recommended usage is daily, street, and moderate race Conservatively rated to hold 500 lbs/ft of torque Designed to be used with the stock dual mass flywheel.

Show More Show Less

South Bend Clutch Stage 4 Extreme Clutch

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:25075818

Part#: K7052602SSXDMF

Ships in 2 Business Days

$ 1,367.99 USD

Add to Wish List

Qty

$ 1,367.99 USD

Add to Wish List

South Bend Clutch Stage 4 X-Series clutch kits are build-to-order clutch packages for vehicles modified to exceed Stage 3 hp parameters. This kit is designed for use with the OE dual mass flywheel. The race-engineered pressure plate is modified for maximum plate load, and helps to deliver more transmittable torque, stability, extended life, and superior thermal resistance. The South Bend Clutch Stage 4 X-Series clutch kits provide noticeably better dynamics through higher clamp loads, when driving your vehicle to its limits. Order the Stage 4 X-Series clutch kit recommended for your specific vehicle and engine size. Features, items, and specs include: * Puck-style disc offered in sprung and un-sprung options * Graphite-impregnated ceramic or sintered iron friction material options * Torque ratings calculated at time of ordering * Engagement characteristics can be abrupt * Meticulous processing and advanced packaging materials

Show More Show Less

South Bend Clutch Stage 3 Drag Clutch Kit

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Vehicles with production date from 2007

T#:25075815

Part#: K7052602SSDXDBDM

Ships in 2 Business Days

$ 1,302.99 USD

Add to Wish List

Qty

$ 1,302.99 USD

Add to Wish List

This clutch package is built to handle heavily modified cars and is designed to function according to the specific needs of the 1/4 and 1/8 mile track. The pressure plate for this kit is SFI approved Race Cover engineered to disengage with less pedal travel shortening the shift time. Discs are a puck design, which reduces rotational mass, and are assembled with all high-carbon component pieces for maximum strength. The friction material used is Graphite impregnated Ceramic perfectly suited for drag racing because of its maximum friction coefficient, rapid heat dissipation and abrupt engagement characteristics. Recommended uses drag, pulling, and drifting.

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

AeroCatch Racing Hood and Body Panel Fasteners (Pair) - Better than h...

GSP CV Axle Assembly - Front Left - BMW F22/23 F3X xDrive

GSP CV Axle Assembly - Front Right - BMW F22/23 F3X xDrive

GSP CV Axle Assembly - Rear Left - BMW F22/23 F3X

GSP CV Axle Assembly - Rear Right - BMW F22/23 F3X

South Bend Clutch K70526-02-SS-DXD-B-SMF

South Bend Clutch Stage 3 Daily Driver Clutch Kit

South Bend Clutch Stage 3 Endurance Clutch Kit

Stage 2 Drag Clutch Kit

South Bend Clutch Stage 4 X-Series Clutch Kit

Stage 2 Endurance Clutch Kit

Stage 3 Endurance Clutch Kit

Stage 3 Daily Clutch Kit

South Bend Clutch Stage 4 Extreme Clutch

South Bend Clutch Stage 3 Drag Clutch Kit

Select Vehicle

Purpose

Category

Brand

Price

Shipping

Narrow Results