BMW 3 Series F34 (2014+)

MSI 14x1.25 Bullet Nose Racing Wheel Studs with Dry Lube - F10 F30 F8...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:340355

Part#: MSI-M14X125

Ships on Jul 1, 2026

Starting at $ 25.98 USD

Add to Wish List

Starting at $ 25.98 USD

Add to Wish List

70MM, 80MM, OR 90MM OVERALL LENGTH
OUR HIGHEST-GRADE PREMIUM WHEEL STUD
DRY LUBE WITH BLACK M-PHOSPHATE COATING
STUD FOR RACE/TRACK USE
CORRECT SHOULDER SIZE FOR A WIDE RANGE OF HUBS/BRAKE ROTORS
USE WITH 14x1.5 NUT
For the very best in a race-grade wheel stud, stop looking! These are the wheel studs that our race teams insist on (after years of trying every stud design on the market). MSI Racing specializes in hardware for motorsport use (NASCAR and IMSA) and other advanced industries. We tried them on our Grand-Am/IMSA racecars and were very impressed by the performance and durability of their designs. Race wins and championships can come down to the seconds of a pitstop. We could run any wheel stud in the world and we use these. After testing them over the course of a few endurance seasons we decided to offer them to all of our customers as well.

These studs are available in three overall lengths - 70.5mm, 80.5mm, and 90.5mm. All sizes are made with aircraft quality alloy steel and have roll formed threads for greater strength than cut threads. We use a dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish. Manganese is preferred over the more common zinc because it's better at reducing friction and wear to prevent thread galling. With the dry lube applied over the phosphate this is the best corrosion resistance we have seen in any wheel stud! Salt tests have shown this stud is superior to others in corrosion resistance. The dry lube helps the nut engage and glide over the threads for faster engagement without cross threading or binding. Other features of our MSI studs include a large bullet nose nut-starter and a properly sized shank to work with a wider range of BMW wheel, nut, and brake rotor combinations. We intentionally avoid the extra large shoulders you see on other studs because they can interfere with some brake rotor hats. The extra large shoulder can be too large to allow the rotor to pass through and drilling out the holes is required (not cool!) Our studs have the sufficient shank for the brake rotor without interfering.

We configured these studs to have a 14x1.25 thread to go into the wheel hub. But the exposed stud has 14x1.5 threads. We did this because threading a nut is faster on 1.5 threads than a finer 1.25 thread pitch, which saved us time during pitstops. There are also more wheel nut options in 14x1.5. When you order our 14x1.25 studs make sure you also order the 14x1.5 nuts.

FREE red threadlocker with purchase of a full set of wheel studs (16 or more)MSI Dry Lube Bullet Nose Wheel Stud Features:
Dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish
Innovative nut-starter and bullet shape radius that all but eliminates cross-threading
Properly sized shank to work with a wide range of brake rotor, wheel, and nut combinations
Heat-treated aircraft quality alloy steel
Developed from over 20 years of top level NASCAR use
These studs are installed using the traditional 'double-nut' method (one regular nut and one jam nut) with thread locking compound (Red Turbo-Lock or similar).

Sold per stud.
Wheel nuts sold separately.

Show More Show Less

GSP CV Axle Assembly - Front Left - BMW F22/23 F3X xDrive

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:27238720

Part#: NCV27043

In Stock

$ 131.99 USD

Add to Wish List

Qty

$ 131.99 USD

Add to Wish List

GSP New CV Axles are made from only the finest materials using premium steel, boot, and grease. GSP CV Axles are designed to exceed the original equipment specifications.for a trouble free ride. FEATURES & BENEFITS Extensive quality control and testing process to ensure a long-lasting performance Heat-treated components provide premium strength, increased tensile, and extended service life GSP Silent Ride Technology OE designed and manufactured CV joints to provide a quiet ride Premium grade neoprene boots provide protection against dirt and debris in driving conditions Specially formulated moly grease for optimal performance at high temperatures High-quality stainless-steel clamps for heavy duty strength and durability Spline rolled for precise durable fitment GSP CV Axles are covered with a limited lifetime warranty SPECIFICATIONS ABS Tone Ring Included: No Boot Material: Neoprene Compressed Length: 550 Inboard Spline Quantity: 27 Prop 65 Yes/No: Yes Axle Nut Included: NO California Proposition 65: Yes Inboard Joint Type: Male Outboard Joint Type: Conventional

Show More Show Less

GSP CV Axle Assembly - Front Right - BMW F22/23 F3X xDrive

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:27238721

Part#: NCV27044

In Stock

$ 144.99 USD

Add to Wish List

Qty

$ 144.99 USD

Add to Wish List

GSP New CV Axles are made from only the finest materials using premium steel, boot, and grease. GSP CV Axles are designed to exceed the original equipment specifications.for a trouble free ride. FEATURES & BENEFITS Extensive quality control and testing process to ensure a long-lasting performance Heat-treated components provide premium strength, increased tensile, and extended service life GSP Silent Ride Technology OE designed and manufactured CV joints to provide a quiet ride Premium grade neoprene boots provide protection against dirt and debris in driving conditions Specially formulated moly grease for optimal performance at high temperatures High-quality stainless-steel clamps for heavy duty strength and durability Spline rolled for precise durable fitment GSP CV Axles are covered with a limited lifetime warranty SPECIFICATIONS ABS Tone Ring Included: No Boot Material: Neoprene Compressed Length: 841 Inboard Spline Quantity: 27 Prop 65 Yes/No: Yes Axle Nut Included: NO California Proposition 65: Yes Inboard Joint Type: Male Outboard Joint Type: Conventional

Show More Show Less

GSP CV Axle Assembly - Rear Left - BMW F22/23 F3X

For vehicles with Manual transmissions only

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:27238726

Part#: NCV27030

In Stock

$ 162.99 USD

Add to Wish List

Qty

$ 162.99 USD

Add to Wish List

GSP New CV Axles are made from only the finest materials using premium steel, boot, and grease. GSP CV Axles are designed to exceed the original equipment specifications.for a trouble free ride. FEATURES & BENEFITS Extensive quality control and testing process to ensure a long-lasting performance Heat-treated components provide premium strength, increased tensile, and extended service life GSP Silent Ride Technology OE designed and manufactured CV joints to provide a quiet ride Premium grade neoprene boots provide protection against dirt and debris in driving conditions Specially formulated moly grease for optimal performance at high temperatures High-quality stainless-steel clamps for heavy duty strength and durability Spline rolled for precise durable fitment GSP CV Axles are covered with a limited lifetime warranty SPECIFICATIONS ABS Tone Ring Included: No Axle Nut Length: 23 Axle Nut Thread Size: M24×1.5 Boot Material: Neoprene Compressed Length: 29.09 Inboard Spline Quantity: 27 Outboard Spline Quantity: 28 Axle Nut Included: Yes Axle Nut Socket Size: 36 Axle Nut Type: Hex California Proposition 65: Yes Inboard Joint Type: Male Outboard Joint Type: Conventional Prop 65 Yes/No: Yes

Show More Show Less

GSP CV Axle Assembly - Rear Right - BMW F22/23 F3X

For vehicles with Manual transmissions only

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:27238727

Part#: NCV27031

Ships in 2 Business Days

$ 140.99 USD

Add to Wish List

Qty

$ 140.99 USD

Add to Wish List

GSP New CV Axles are made from only the finest materials using premium steel, boot, and grease. GSP CV Axles are designed to exceed the original equipment specifications.for a trouble free ride. FEATURES & BENEFITS Extensive quality control and testing process to ensure a long-lasting performance Heat-treated components provide premium strength, increased tensile, and extended service life GSP Silent Ride Technology OE designed and manufactured CV joints to provide a quiet ride Premium grade neoprene boots provide protection against dirt and debris in driving conditions Specially formulated moly grease for optimal performance at high temperatures High-quality stainless-steel clamps for heavy duty strength and durability Spline rolled for precise durable fitment GSP CV Axles are covered with a limited lifetime warranty SPECIFICATIONS ABS Tone Ring Included: No Axle Nut Length: 23 Axle Nut Thread Size: M24×1.5 Boot Material: Neoprene Compressed Length: 793 Inboard Spline Quantity: 27 Outboard Spline Quantity: 28 Axle Nut Included: Yes Axle Nut Socket Size: 36 Axle Nut Type: Hex California Proposition 65: Yes Inboard Joint Type: Male Outboard Joint Type: Conventional Prop 65 Yes/No: Yes

Show More Show Less