BMW 3 Series F34 (2014+)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

CNC Billet License Plate Bracket
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Rogue Engineering - Corporate Logo
T#:27105150
Part#: RE.061
In Stock
$ 119.00 USD
Free Shipping
$ 119.00 USD
Free Shipping
You are looking at the BEST license plate bracket for your BMW, price no object! We never understood why BMW would put a cheap, plastic bracket on the back of a BMW to hold a license plate. The screws holding the bracket on would rust, the steel inserts hold the plate on would also rust, causing the hardware holding the plate on to seize or just no longer function. Our bracket fits any BMW that mounts license plates in the rear that use factory part number 51-18-8-238-061. Fits most BMWs produced AFTER 1999. If your vehicle does not use the plastic plate, it will not fit. Does not fit E46 touring (wagon). PROBLEMS with the factory bracket and hardware The screws that secure the plastic bracket are plated steel and will corrode over time. These two screw would normally not be seen since it is under the license plate, but it is holding the bracket onto the trunk. The four (4) nutserts that are pressed into the plastic frame (to hold the license plate) are also steel and will eventually seize with the bolt and just spin in the plastic frame becoming useless. The plastic frame itself is flimsy, doing a near minimal task of holding on the license plate. The hardware securing the plate to the bracket will rust, seizing to the nutsert or even spinning in place becoming completely useless. SOLUTION Create a more robust bracket that would not only be stiffer but also more corrosion resistant; CNC’d aluminum with an anodized finish. We machine a near identical plate, matching factory dimensions, from 1/2" plate of aluminum. Instead of nutserts pressed into plastic, map the correct position and machine the threads for the hardware directly into the plate. The hardware used to secure the new bracket to the trunk would be made from stainless steel (or optional corrosion-proof titanium) The hardware used to secure the license plate to the newly engineered bracket would also be stainless steel (or optional made from titanium) Kit Includes: One (1) Rogue Engineering designed and manufactured CNC'd aluminum license plate bracket Two (2) Stainless screws to secure bracket to trunk. Four (4) stainless screws to secure license plate to bracket.
Show More Show Less
AeroCatch Racing Hood and Body Panel Fasteners (Pair) - Better than h...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AeroCatch - Corporate Logo
T#:340098
Part#: AEROCATCH
In Stock
$ 566.99

This product was last offered at the strikethrough price on
05-13-2026

Starting at $ 82.99 USD
Free Shipping
Starting at $ 82.99 USD
Free Shipping
As used by Turner Motorsport on our championship winning BMW race cars, the new aerodynamically efficient and aesthetically styled AeroCatch is setting new standards in hood fixing for the 21st century. Say goodbye to your standard hood pins -- these are better all around.
Show More Show Less
GSP CV Axle Assembly - Front Left - BMW F22/23 F3X xDrive
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
GSP North America - Corporate Logo
T#:27238720
Part#: NCV27043
In Stock
$ 131.99 USD
Free Shipping on orders $49 and up
GSP New CV Axles are made from only the finest materials using premium steel, boot, and grease. GSP CV Axles are designed to exceed the original equipment specifications.for a trouble free ride. FEATURES & BENEFITS Extensive quality control and testing process to ensure a long-lasting performance Heat-treated components provide premium strength, increased tensile, and extended service life GSP Silent Ride Technology OE designed and manufactured CV joints to provide a quiet ride Premium grade neoprene boots provide protection against dirt and debris in driving conditions Specially formulated moly grease for optimal performance at high temperatures High-quality stainless-steel clamps for heavy duty strength and durability Spline rolled for precise durable fitment GSP CV Axles are covered with a limited lifetime warranty SPECIFICATIONS ABS Tone Ring Included: No Boot Material: Neoprene Compressed Length: 550 Inboard Spline Quantity: 27 Prop 65 Yes/No: Yes Axle Nut Included: NO California Proposition 65: Yes Inboard Joint Type: Male Outboard Joint Type: Conventional
Show More Show Less

GSP CV Axle Assembly - Front Right - BMW F22/23 F3X xDrive
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
GSP North America - Corporate Logo
T#:27238721
Part#: NCV27044
In Stock
$ 144.99 USD
Free Shipping on orders $49 and up
GSP New CV Axles are made from only the finest materials using premium steel, boot, and grease. GSP CV Axles are designed to exceed the original equipment specifications.for a trouble free ride. FEATURES & BENEFITS Extensive quality control and testing process to ensure a long-lasting performance Heat-treated components provide premium strength, increased tensile, and extended service life GSP Silent Ride Technology OE designed and manufactured CV joints to provide a quiet ride Premium grade neoprene boots provide protection against dirt and debris in driving conditions Specially formulated moly grease for optimal performance at high temperatures High-quality stainless-steel clamps for heavy duty strength and durability Spline rolled for precise durable fitment GSP CV Axles are covered with a limited lifetime warranty SPECIFICATIONS ABS Tone Ring Included: No Boot Material: Neoprene Compressed Length: 841 Inboard Spline Quantity: 27 Prop 65 Yes/No: Yes Axle Nut Included: NO California Proposition 65: Yes Inboard Joint Type: Male Outboard Joint Type: Conventional
Show More Show Less

Rogue Engineering E9x/F8x Short Throw Clutch Pedal Arm
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Rogue Engineering - Corporate Logo
T#:45039678
Part#: RE.310.
In Stock
$ 439.00 USD
Free Shipping on orders $49 and up
GSP CV Axle Assembly - Rear Left - BMW F22/23 F3X
For vehicles with Manual transmissions only
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
GSP North America - Corporate Logo
T#:27238726
Part#: NCV27030
In Stock
$ 162.99 USD
Free Shipping on orders $49 and up
$ 162.99 USD
Free Shipping on orders $49 and up
GSP New CV Axles are made from only the finest materials using premium steel, boot, and grease. GSP CV Axles are designed to exceed the original equipment specifications.for a trouble free ride. FEATURES & BENEFITS Extensive quality control and testing process to ensure a long-lasting performance Heat-treated components provide premium strength, increased tensile, and extended service life GSP Silent Ride Technology OE designed and manufactured CV joints to provide a quiet ride Premium grade neoprene boots provide protection against dirt and debris in driving conditions Specially formulated moly grease for optimal performance at high temperatures High-quality stainless-steel clamps for heavy duty strength and durability Spline rolled for precise durable fitment GSP CV Axles are covered with a limited lifetime warranty SPECIFICATIONS ABS Tone Ring Included: No Axle Nut Length: 23 Axle Nut Thread Size: M24×1.5 Boot Material: Neoprene Compressed Length: 29.09 Inboard Spline Quantity: 27 Outboard Spline Quantity: 28 Axle Nut Included: Yes Axle Nut Socket Size: 36 Axle Nut Type: Hex California Proposition 65: Yes Inboard Joint Type: Male Outboard Joint Type: Conventional Prop 65 Yes/No: Yes
Show More Show Less

GSP CV Axle Assembly - Rear Right - BMW F22/23 F3X
For vehicles with Manual transmissions only
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
GSP North America - Corporate Logo
T#:27238727
Part#: NCV27031
Ships in 3 Business Days
$ 140.99 USD
Free Shipping on orders $49 and up
$ 140.99 USD
Free Shipping on orders $49 and up
GSP New CV Axles are made from only the finest materials using premium steel, boot, and grease. GSP CV Axles are designed to exceed the original equipment specifications.for a trouble free ride. FEATURES & BENEFITS Extensive quality control and testing process to ensure a long-lasting performance Heat-treated components provide premium strength, increased tensile, and extended service life GSP Silent Ride Technology OE designed and manufactured CV joints to provide a quiet ride Premium grade neoprene boots provide protection against dirt and debris in driving conditions Specially formulated moly grease for optimal performance at high temperatures High-quality stainless-steel clamps for heavy duty strength and durability Spline rolled for precise durable fitment GSP CV Axles are covered with a limited lifetime warranty SPECIFICATIONS ABS Tone Ring Included: No Axle Nut Length: 23 Axle Nut Thread Size: M24×1.5 Boot Material: Neoprene Compressed Length: 793 Inboard Spline Quantity: 27 Outboard Spline Quantity: 28 Axle Nut Included: Yes Axle Nut Socket Size: 36 Axle Nut Type: Hex California Proposition 65: Yes Inboard Joint Type: Male Outboard Joint Type: Conventional Prop 65 Yes/No: Yes
Show More Show Less
Rogue Engineering Rear Carrier Bushing Mount - F8X M2 M3 M4, F3X 3 &a...
For vehicles with a production date from 11/2014+ and a manual transmission
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Rogue Engineering - Corporate Logo
T#:48401514
Part#: RE.RCBM-F8X
Ships on Jun 26, 2026
New Item
$ 109.00 USD
Free Shipping on orders $49 and up
$ 109.00 USD
Free Shipping on orders $49 and up
The Rogue Engineering rear shifter carrier bushing is specifically designed to fit the F8X chassis. It replaces the flimsy OEM bushing and secures the manual transmission carrier with a custom-molded urethane bushing in a CNC'd aluminium mount. By installing this bushing, it allows the shifter pattern to be more precise and accurate.
Show More Show Less