The factory BMW charge pipes are prone to cracking, as they are made from brittle plastic. Here at Turner, we sell several brands of replacement charge pipes that are typically made from cast aluminum. We recommend upgrading to hard charge pipes even on stock forced induction vehicles to avoid cracking - we've seen cracking occur on high mileage cars running stock power just as frequently as we do with high horsepower builds.
This charge pipe kit from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipes are made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. This set of pipes will not only allow the engine to hold more boost, but they will outlast the stock indefinitely. Aluminum is also a rigid material, meaning it doesn't deform or flex very easily. What this translates to is increased reliability since an aluminum pipe cant flex and decouple itself as plastic does. One more feature to note is the 1/8"NPT fitting in the throttle body pipe. This can be used as the perfect point for a methanol injector or port injection nozzle. Comes with a threaded plug to seal the port until it is needed. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 1/8" NPT bung with plug
Show More Show Less
BMWs, OEM charge pipe can become brittle and will generally fail under increased boost pressure. To combat this, Forge has developed a replacement with an increased diameter which helps to reduce turbulence and maximize airflow into the engine.
Show More Show Less
Connects your turbo outlet to your front mounted intercooler - also know as a "Hot Side Charge Pipe" MMR's high-flow boost pipe kit includes everything needed to improve the performance, reliability, and aesthetics of your N55-powered F-Chassis BMW. Smoothbore pipework improves airflow over stock and due to reducing deformation of the hoses under load or vacuum, the MMR boost pipes also improve throttle response and power output. Increased boost pressure can cause the stock pipework to split or crack and cause drivability issues. MMR's boost & charge pipes are made of lightweight aluminum which fit right in place of OEM charge pipes. Includes a 1/8” bung for easy addition of either methanol or water injection.
Show More Show Less
MMX's high-flow charge pipe kit includes everything needed to improve the performance, reliability, and aesthetics of your B58-powered F-Chassis BMW. Smooth bore pipework improves airflow over stock and due to reducing deformation of the hoses under load or vacuum, the MMR charge pipes also improve throttle response and power output. Increased boost pressure can cause the stock pipework to split or crack and cause drivability issues. MMR's charge pipes are made of lightweight aluminum which fit right in place of OEM charge pipes. Includes a 1/8” bung for easy addition of either methanol or water injection. Features: Two high-flow aluminum charge pipes with CNC leak-free connections Silicone coupler hose o-ring gasket c-clip Jubilee clips x4 Throttle body bolts
Show More Show Less
The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. Smooth radius bends allow for the cleanest path for air to travel as well as increased diameter which allows a larger volume of compressed air to be ingested. Additionally, an pre-machined meth bung allows for the addition of this system at the point of installation or at a later date. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers Machined bung for meth injection
Show More Show Less
This intake pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory intake pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased air volume
Show More Show Less
This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume
Show More Show Less
The Inlet pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. The FTP inlet pipe replaces the factory hose between the air filter and turbo and will not expand under boost. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume Eliminates factory sound chamber
Show More Show Less
This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume
Show More Show Less
This Boost pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. Connects turbo to intercooler. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers
Show More Show Less
This pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory piping is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers
Show More Show Less
The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. Smooth radius bends allow for the cleanest path for air to travel as well as increased diameter which allows a larger volume of compressed air to be ingested. Additionally, an pre-machined meth bung allows for the addition of this system at the point of installation or at a later date. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers Machined bung for meth injection
Show More Show Less
This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers
Show More Show Less
All aluminum construction to keep the boost flowing. Charge pipe for BMW Gen 1 B58 engine. Convert your car from OEM plastic piping which has a tendency to fail to aluminum piping. Features: Kit is complete with spare "C" clip and intercooler pipe seal. Direct OEM replacement Bung for water injection The Racing Dynamics charge pipe increases flow and improves the reliability of your B58 engine. The aluminum pipe replaces the fragile factory plastic pipe which can fail under increased boost pressure The increase pipe size helps to reduce turbulence and maximize airflow to the engine
Show More Show Less
The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. Smooth radius bends allow for the cleanest path for air to travel as well as increased diameter which allows a larger volume of compressed air to be ingested. Additionally, an pre-machined meth bung allows for the addition of this system at the point of installation or at a later date. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers Machined bung for meth injection
Show More Show Less
MMX's high-flow charge pipe kit includes everything needed to improve the performance, reliability, and aesthetics of your N20-powered F-Chassis BMW. Smooth bore pipework improves airflow over stock and due to reducing deformation of the hoses under load or vacuum, the MMR charge pipes also improve throttle response and power output. Increased boost pressure can cause the stock pipework to split or crack and cause drivability issues. MMR's charge pipes are made of lightweight aluminum which fit right in place of OEM charge pipes. Includes a 1/8” bung for easy addition of either methanol or water injection. Features: Three high-flow aluminium charge pipes with CNC leak-free connections Four silicone coupler hoses c-clips Jubilee clips
Show More Show Less
MMR's high-flow charge pipe kit includes everything needed to improve the performance, reliability, and aesthetics of your N55-powered F-Chassis BMW. Smooth bore pipework improves airflow over stock and due to reducing deformation of the hoses under load or vacuum, the MMR charge pipes also improve throttle response and power output. Increased boost pressure can cause the stock pipework to split or crack and cause drivability issues. MMR's charge pipes are made of lightweight aluminum which fit right in place of OEM charge pipes. For the intake side. Includes a 1/8” bung for easy addition of either methanol or water injection. Features: Two replacement high-flow aluminum charge pipes with CNC leak-free connections Silicone coupler hose Replacement c-clip Jubilee clips o-ring
Show More Show Less
MMX's high-flow charge pipe kit includes everything needed to improve the performance, reliability, and aesthetics of your N55-powered F-Chassis BMW. Smooth bore pipework improves airflow over stock and due to reducing deformation of the hoses under load or vacuum, the MMR charge pipes also improve throttle response and power output. Increased boost pressure can cause the stock pipework to split or crack and cause drivability issues. MMR's charge pipes are made of lightweight aluminum which fit right in place of OEM charge pipes. For the intake side. Includes a 1/8” bung for easy addition of either methanol or water injection. Features: Two replacement high-flow aluminum charge pipes with CNC leak-free connections Silicone coupler hose Replacement c-clip Jubilee clips o-ring
Show More Show Less
MMX's high-flow charge pipe kit includes everything needed to improve the performance, reliability, and aesthetics of your N20-powered F-Chassis BMW. Smooth bore pipework improves airflow over stock and due to reducing deformation of the hoses under load or vacuum, the MMR charge pipes also improve throttle response and power output. Increased boost pressure can cause the stock pipework to split or crack and cause drivability issues. MMR's charge pipes are made of lightweight aluminum which fit right in place of OEM charge pipes. Includes a 1/8” bung for easy addition of either methanol or water injection. Features: Three high-flow aluminium charge pipes with CNC leak-free connections Four silicone coupler hoses c-clips Jubilee clips
Show More Show Less
