Charge Pipes & Turbo Inlets for BMW 3 Series F34 (2014+)

Upgraded N55 Silicone/Aluminum Turbo Inlet Hose Kit - F Chassis N55 ...

10X Entries Into Our F80 M3 Sweepstakes

T#:639115

Part#: 028145TMS09KT

In Stock

Sale - Save 20% $ 312.99

This product was last offered at the strikethrough price on
06-14-2026

$ 249.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 312.99

This product was last offered at the strikethrough price on
06-14-2026

$ 249.99 USD

Add to Wish List

Owning a BMW for any length of time, you are most likely aware of BMW's less-than-stellar reputation for developing weak plastic hoses and other parts. A great example of this are the N55 turbo inlet pipes. Over time, constant temperature swings cause these plastic pipes/hoses to become brittle. This often leads to cracks, splits, or even complete failure, allowing your turbos to suck in unfiltered air. To prevent this from happening to you, we are proud to present our very own Turner Motorsport F-Chassis N55 Upper Silicone & Lower Cast Aluminum Turbo Inlet Hoses!

Show More Show Less

Turner Charge Pipe Upgrade Kit - F22/23 F3X F87 N55

10X Entries Into Our F80 M3 Sweepstakes
10X Entries For Our Spin To Win Sweepstakes!

T#:584163

Part#: 024592TMS01KT

Back Ordered

Sale - Save 25% $ 353.99

This product was last offered at the strikethrough price on
06-14-2026

$ 265.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 353.99

This product was last offered at the strikethrough price on
06-14-2026

$ 265.49 USD

Add to Wish List

The N55 OE charge pipe is prone to failure; after all it is plastic. With constant heat cycling, the factory plastic becomes very brittle over time, leading to cracks and boost leaks, and ultimately entire part failures. The OE charge pipe has also been proven to break once under increased boost pressure. Replace the weak OE charge pipe with the Turner N55 Charge pipe for increased air flow, throttle response, and reliability. You can safely and reliably turn up the boost on your N55 once this kit is installed, and not worry about the problematic factory piece. Whether you have a stock car and are looking for improved throttle response and peace of mind, or a high boost monster in search of reliability in your big horsepower build, this charge pipe is the solution you’ve been looking for! Features: Upper & Lower Charge Pipe 6061-T6 Aluminum construction for increased durability over the factory plastic charge pipe. Can withstand higher boost pressures while offering OE-like fitment. Billet CNC throttle body flange for OEM fitment Mandrel bent 2.85” tubing (larger than stock) for improved airflow and increased performance. Black powder coated for exceptional durability and corrosion resistance. 4-ply reinforced silicone hose and 6061-T6 powder coated aluminum coupler to retain factory fitment to intercooler. Silicone provides a smooth transition from intercooler outlet to throttle body diameter to maximize flow and volumetric efficiency NOTE: C-Clip is not included and must be re-used or purchased new!

Show More Show Less

Turner Turbo Boost Pipe Upgrade - F22/23 F3X F87 N55

10X Entries Into Our F80 M3 Sweepstakes

T#:584162

Part#: 024592TMS03KT

In Stock

Sale - Save 25% $ 203.99

This product was last offered at the strikethrough price on
06-14-2026

$ 152.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 203.99

This product was last offered at the strikethrough price on
06-14-2026

$ 152.99 USD

Add to Wish List

The N55 OE boost pipe is often prone to failure; after constant heat cycling, the factory plastic becomes very brittle, leading to cracks and boost leaks, and ultimately entire part failures. The OE boost pipe has also been proven to break once under increased boost pressure. Replace the weak OE boost pipe with the new Turner N55 Boost Pipe for increased air flow, increased throttle response, and increased reliability. You can also safely turn up the boost on your N55 once this kit is installed, and not worry about the problematic factory piece. Whether you have a stock car and are looking for improved throttle response and peace of mind, or a high boost monster in search of reliability in your big horsepower build, this charge pipe is the solution you’ve been looking for! Features: Turbo Outlet Boost Pipe (AKA "Hot Side Charge Pipe") 4-ply reinforced silicone for increased durability over the factory rubber hose. 6061-T6 type II black anodized aluminum couplers retain the factory connection to the turbo and intercooler.

Show More Show Less

Turner Complete Charge Pipe Upgrade Kit - F22/23 F3X F87 N55 ...

10X Entries Into Our F80 M3 Sweepstakes
10X Entries For Our Spin To Win Sweepstakes!

T#:584164

Part#: 024592TMS09KT

Back Ordered

Sale - Save 25% $ 479.99

This product was last offered at the strikethrough price on
06-14-2026

$ 359.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 479.99

This product was last offered at the strikethrough price on
06-14-2026

$ 359.99 USD

Add to Wish List

Huge upgrade to brittle factory plastic pipes that are prone to failure.

Turner Motorsport Upgraded Silicone Lower Air Intake Pipe (Turbo Inle...

10X Entries Into Our F80 M3 Sweepstakes

T#:591415

Part#: 026510TMS10KT

In Stock

Sale - Save 15% $ 241.99

This product was last offered at the strikethrough price on
06-14-2026

$ 205.69 USD

Add to Wish List

Qty

Sale - Save 15%

$ 241.99

This product was last offered at the strikethrough price on
06-14-2026

$ 205.69 USD

Add to Wish List

Designed with a smooth contour for unobstructed flow compared to the OE molded plastic. This provides increased turbo response, increased airflow, & less turbo lag. Constructed of 5-Ply reinforced silicone for improved durability. Pair with our Turner upper intake pipe for even more intake noises!

Show More Show Less

Paradigm Engineering Turbo Inlet Upgrade - F Chassis B58

T#:5269549

Part#: FCHASTURBINLET

Ships in 1-3 days

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Paradigm Engineering's F Chassis B58 BMW upgraded Turbo Inlet/Resonator delete pipe maximizes and smooths airflow from the intake to the turbo by removing all restrictions and increasing air flow for more power and better turbo efficiency. Paradigm Engineering's F Chassis Turbo Inlet pipe is a direct replacement for the restrictive OEM unit.

Show More Show Less

VRSF Chargepipe Upgrade Kit - N20 (Automatic Transmission)

We Price Match - Give Us A Call or Chat! For vehicles with Automatic Transmission

T#:585486

Part#: F-N20-CPA

In Stock

$ 219.99 USD

Add to Wish List

Qty

$ 219.99 USD

Add to Wish List

Increase throttle response and decreases turbo lag with the VRSF chargepipe. This aluminum chargepipe features a CNC billet aluminum OEM throttle body flange and is finished in powder-coated black.

Turner Upgraded Aluminum Lower Turbo Inlet Pipe - F3x B58

10X Entries Into Our F80 M3 Sweepstakes

T#:1856019

Part#: 029091TMS01KT

In Stock

Sale - Save 25% $ 222.99

This product was last offered at the strikethrough price on
06-14-2026

$ 167.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 222.99

This product was last offered at the strikethrough price on
06-14-2026

$ 167.24 USD

Add to Wish List

More airflow to the turbo, improved turbo response, and less turbo lag. Pair with the Turner Intake, to eliminate the factory intake muffler, and gain more intake noise.

VRSF Charge Pipe Upgrade Kit for BMW B58 F22/23 F3X G30/31/32 G11/12 ...

We Price Match - Give Us A Call or Chat! Fits models with a Gen1 B58 engine (B58A) - will not fit models with the B58TU (B58D) engine

T#:588086

Part#: 10581030

In Stock

$ 219.99 USD

Add to Wish List

Qty

$ 219.99 USD

Add to Wish List

Increase throttle response and decreases turbo lag with the VRSF Charge Pipe Upgrade for your F or G Series BMW with a B58 engine. Every VRSF Charge Pipe is constructed from mandrel-bent, T6061 grade aluminum including the flanges. Each flange is precision machined from CNC billet aluminum, including the throttle body, intercooler and vacuum connections. After these are welded, they’re test fitted on multiple jigs in order to ensure proper fitment and a reliable, leak-free connection. Each VRSF charge pipe is finished in a durable wrinkle black powder-coated finish that blends in perfectly with the engine bay. VRSF also include one plugged 1/8″ NPT bung that can be used for methanol injection, boost leak testing or as a boost source. The OEM charge pipe is prone to failure at both stock and tuned boost levels which is why they include everything necessary to replace your flimsy OEM charge pipe including high quality, 4-ply silicone couplers as well as stainless steel t-bolt clamps. Features: Increase throttle response and decreases turbo lag. Durable wrinkle black powder coated finish. 4 ply silicone connectors & stainless steel t-bolt clamps included. Constructed from T6061 tig welded aluminum. Includes a 1/8″ NPT bungs for meth/water injection. Throttle body matched mandrel bent piping. Billet precision machined CNC flanges for a leak-free connection. Includes everything necessary to upgrade from factory charge pipe. Lifetime warranty. We also recommend replacing your throttle body seal after removing the stock charge pipe with a brand new seal to prevent leaks REPLACES BMW OEM PART NUMBER 13718601684

Show More Show Less

Turner Hot Side & Cold Side Charge Pipes - N20

10X Entries Into Our F80 M3 Sweepstakes

T#:1135776

Part#: 005793LA10KT1

In Stock

Sale - Save 25% $ 466.99

This product was last offered at the strikethrough price on
06-14-2026

$ 350.24 USD

Add to Wish List

Qty

Sale - Save 25%

$ 466.99

This product was last offered at the strikethrough price on
06-14-2026

$ 350.24 USD

Add to Wish List

The factory F3x N20 charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power.

Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. You can also safely turn up the boost on your N20 once this kit is installed, and not worry about the problematic factory piece.

Whether you have a stock car and are looking for improved throttle response and peace of mind, or a high boost monster in search of reliability in your big horsepower build, this charge pipe is the solution.

Features:

- Cold Side Charge Pipe

6061-T6 Aluminum construction for increased durability over the factory plastic charge pipe. Can withstand higher boost pressures while offering OE-like fitment.
Billet CNC throttle body flange for OEM fitment
Mandrel bent 70mm tubing (larger than stock) for improved airflow and increased performance.
Black powder coated for exceptional durability and corrosion resistance.
4-ply reinforced silicone hose and 6061-T6 powder coated aluminum coupler to retain factory fitment to intercooler.
Silicone provides a smooth transition from intercooler outlet to throttle body diameter to maximize flow and volumetric efficiency
- Hot Side Charge Pipe

4-ply reinforced silicone for increased durability over the factory rubber hose.
6061-T6 type II black anodized aluminum couplers retain the factory connection to the turbo and intercooler.

Show More Show Less

CTS Turbo Turbo Inlet Pipe - BMW F2X/F3X 230i/330i/430i B46/B48 ...

T#:50899212

Part#: HW-446

Ships on Oct 21, 2026

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

Unlock maximum airflow and performance from your BMW’s B46/B48 with the CTS Turbo Cast Turbo Inlet Pipe. Designed as a direct replacement for the restrictive factory inlet, this upgrade dramatically improves airflow to the turbocharger, allowing your engine to breathe easier and perform at its full potential.

Show More Show Less

Turner Aluminum Charge Pipe - F3x B58

10X Entries Into Our F80 M3 Sweepstakes

T#:640040

Part#: 029086TMS09KT

In Stock

Sale - Save 25% $ 393.99

This product was last offered at the strikethrough price on
06-14-2026

$ 295.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 393.99

This product was last offered at the strikethrough price on
06-14-2026

$ 295.49 USD

Add to Wish List

The factory B58 charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power.

Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. You can also safely turn up the boost on your B58 once this kit is installed, and not worry about the problematic factory piece.

Whether you have a stock car and are looking for improved throttle response and peace of mind, or a high boost monster in search of reliability in your big horsepower build, this charge pipe is the solution you’ve been looking for!

Design Features and Benefits:

The upper pipe is constructed from 6063 aluminum for increased durability over the factory plastic charge pipe. Can withstand higher boost pressures while offering OE-like fitment.

Billet CNC throttle body flange for OEM fitment.

Black powder coated for exceptional durability and corrosion resistance.

Lower pipe is constructed of 4-ply reinforced silicone hose and a 6061-T6 black anodized aluminum coupler to retain factory fitment to the turbo.

Silicone provides a smooth transition from turbo outlet to the upper aluminum pipe. The silicone also provides good wear resistance wear the charge pipe is in close contact with the turbo inlet and coolant hoses.

Show More Show Less

Turner Motorsport Upgraded Silicone Upper Air Intake Pipe (Turbo Inle...

10X Entries Into Our F80 M3 Sweepstakes

T#:591418

Part#: 026510TMS11KT

In Stock

Sale - Save 20% $ 189.99

This product was last offered at the strikethrough price on
06-14-2026

$ 151.98 USD

Add to Wish List

Qty

Sale - Save 20%

$ 189.99

This product was last offered at the strikethrough price on
06-14-2026

$ 151.98 USD

Add to Wish List

Constructed of 5-Ply reinforced silicone for improved durability. Designed with a smooth contour for unobstructed flow compared to the OE molded plastic. Increase turbo response, increase airflow, and reduce turbo lag.

Show More Show Less

Turner MotorSport Hot Side Charge Pipe - N20

10X Entries Into Our F80 M3 Sweepstakes

T#:1135808

Part#: 005793LA10KT

In Stock

Sale - Save 25% $ 200.99

This product was last offered at the strikethrough price on
06-14-2026

$ 150.74 USD

Add to Wish List

Qty

Sale - Save 25%

$ 200.99

This product was last offered at the strikethrough price on
06-14-2026

$ 150.74 USD

Add to Wish List

The N20 OE charge pipe is often prone to failure; after constant heat cycling, the factory plastic becomes very brittle, leading to cracks and boost leaks, and ultimately entire part failures. The OE charge pipe has also been proven to break once under increased boost pressure. Replace the weak OE charge pipe with the new Turner N20 Charge pipe for increased air flow, increased throttle response, and increased reliability. You can also safely turn up the boost on your N20 once this kit is installed, and not worry about the problematic factory piece. Whether you have a stock car and are looking for improved throttle response and peace of mind, or a high boost monster in search of reliability in your big horsepower build, this charge pipe is the solution you’ve been looking for! Features: Hot Side Charge Pipe 4-ply reinforced silicone for increased durability over the factory rubber hose. 6061-T6 type II black anodized aluminum couplers retain the factory connection to the turbo and intercooler.

Show More Show Less

CTS Turbo Charge Pipe Kit - F22/23 F3X G30 G20 B46/48 2.0L

T#:4333552

Part#: CTS-IT-343

Back Ordered

$ 219.99 USD

Add to Wish List

Qty

$ 219.99 USD

Add to Wish List

CTS Turbo is proud to announce the release of the high-flow aluminum charge pipe for new generations of B46/B48 engines in F-series and some G-series BMW B46/B48 2.0T engines. The CTS Charge Pipe Kit offers more airflow than a factory pipe, OE-like fitment, and peace of mind at any boost level. CTS' charge pipe kit will also improve the reliability of your B46/48 engine over the plastic stock part. You’ll notice an increase in throttle response and a decrease in turbo lag. This kit is a must for vehicles tuned to run higher than stock boost level. Product Details: Will not break or crack under boost Precision CNC machined flanges for perfect fitment T6061 Mandrel-Bent Aluminum Pipe Robust Black Powder-coat Finish 4-ply Silicone Connectors Stainless Steel Clamps and Hardware 1/8' NPT Water-Methanol Bung with plug Replaces BMW part number: 13718601683

Show More Show Less

F22/23 F3x Turner Motorsport Charge Pipes & Intercooler Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:599060

Part#: 024592TMS09KT2

Back Ordered

Sale - Save 20% $ 1,262.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,010.39 USD

Add to Wish List

Qty

Sale - Save 20%

$ 1,262.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,010.39 USD

Add to Wish List

The N55 OE charge pipe is prone to failure; after constant heat cycling, the factory plastic becomes very brittle, leading to cracks and boost leaks, and ultimately entire part failures. The OE charge pipe has also been proven to break once under increased boost pressure. Replace the weak OE charge pipe with the Turner Motorsport N55 Charge pipe for increased air flow, and increased throttle response. You can also safely turn up the boost on your N55 once this kit is installed, and not worry about the problematic factory piece. The perfect compliment to the increased airflow form the Turner Motorsport charge pipes is a intercooler. Turner Motorsport has developed an intercooler upgrade that is far superior to the stock unit. Constructed from cast aluminum with a bar and plate design, this intercooler increases both cross sectional area and frontal surface area by 56%. This increase in area has shown a 45 degree decrees in intake temperature resulting in 18 wheel horsepower and 10 lb/ft of torque on its own.

Show More Show Less

Turner Motorsport Upgraded Silicone Air Intake Pipes (Turbo Inlets) -...

10X Entries Into Our F80 M3 Sweepstakes

T#:591459

Part#: 026510TMS09KT

In Stock

Sale - Save 20% $ 461.99

This product was last offered at the strikethrough price on
06-14-2026

$ 369.57 USD

Add to Wish List

Qty

Sale - Save 20%

$ 461.99

This product was last offered at the strikethrough price on
06-14-2026

$ 369.57 USD

Add to Wish List

Designed with a smooth contour for unobstructed flow compared to the OE molded plastic. Increased turbo response, increased airflow, less turbo lag. Constructed of 5-Ply reinforced silicone for improved durability.

Show More Show Less

Turner Cold Side Charge Pipe - N20

For vehicles with an Automatic Transmission

10X Entries Into Our F80 M3 Sweepstakes

T#:2073438

Part#: 005793LA09KT

In Stock

Sale - Save 25% $ 331.99

This product was last offered at the strikethrough price on
06-14-2026

$ 248.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 331.99

This product was last offered at the strikethrough price on
06-14-2026

$ 248.99 USD

Add to Wish List

Factory Charge Pipes are prone to cracks and blowouts, Upgrade to the Turner Cold Side Charge Pipe kit for increased performance and reliability!

CTS Turbo Turbo Inlet Pipe - BMW F2X/F3X 228i/328i/428i N20/N26 ...

T#:51075074

Part#: HW-464

Back Ordered

15% off MSRP $ 199.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 169.99 USD

Add to Wish List

Qty

15% off MSRP

$ 199.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 169.99 USD

Add to Wish List

The factory plastic turbo inlet is restrictive and can cause intake turbulence due to the accordion-style flex section. CTS Turbo's new turbo inlet for the N20/26 engines is designed to enhance your engine's capabilities by removing this restriction and smoothing airflow to the turbocharger. This 3.2" replacement gives your engine a substantial increase in flow, power, and dependability. Designed with CNC-machined billet fittings, this inlet allows for a seamless fit for both manual and automatic vehicles. Enjoy better throttle response and reduced turbo lag for an improved driving experience.

Show More Show Less

VRSF Chargepipe Upgrade Kit - N20 (Manual Transmission)

We Price Match - Give Us A Call or Chat! For vehicles with Manual Transmission

T#:585489

Part#: F-N20-CPM

Ships in 7 Business Days

$ 219.99 USD

Add to Wish List

Qty

$ 219.99 USD

Add to Wish List

Increase throttle response and decreases turbo lag with the VRSF chargepipe for your 128i/228i/328i/428i. Our aluminum chargepipe features a CNC billet aluminum OEM throttle body flange and is finished in powder coated black. The VRSF chargepipe retains the OEM c-clip in order to provide a better seal over a conventional clamp/coupler design.

Show More Show Less

Silicone Intake Inlet Upgrade - Red - F Chassis B58

Works with the factory BMW intake and most aftermarket intakes

T#:5269554

Part#: FB58INTKINLETRED

Ships in 3 Business Days

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

The Paradigm Engineering B58 BMW silicone intake pipe upgrade smooths the airflow from the intake to the factory turbo inlet by removing the upper factory sound resonator and the lower accordion section of the air inlet pipe.

Show More Show Less

FTP Motorsport Charge Pipe and Boost Pipe Kit - F3X N20

T#:578680

Part#: SG71335F

Back Ordered

$ 370.00 USD

Add to Wish List

Qty

$ 370.00 USD

Add to Wish List

This charge pipe kit from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipes are made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. This set of pipes will not only allow the engine to hold more boost, but they will outlast the stock indefinitely. Aluminum is also a rigid material, meaning it doesn't deform or flex very easily. What this translates to is increased reliability since an aluminum pipe cant flex and decouple itself as plastic does. One more feature to note is the 1/8"NPT fitting in the throttle body pipe. This can be used as the perfect point for a methanol injector or port injection nozzle. Comes with a threaded plug to seal the port until it is needed. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 1/8" NPT bung with plug

Show More Show Less

MMR Boost Pipe Upgrade Kit - N55 F-Chassis

T#:4551976

Part#: MMR02-0502

Ships in 4 Business Days

$ 204.99 USD

Add to Wish List

Qty

$ 204.99 USD

Add to Wish List

Connects your turbo outlet to your front mounted intercooler - also know as a "Hot Side Charge Pipe" MMR's high-flow boost pipe kit includes everything needed to improve the performance, reliability, and aesthetics of your N55-powered F-Chassis BMW. Smoothbore pipework improves airflow over stock and due to reducing deformation of the hoses under load or vacuum, the MMR boost pipes also improve throttle response and power output. Increased boost pressure can cause the stock pipework to split or crack and cause drivability issues. MMR's boost & charge pipes are made of lightweight aluminum which fit right in place of OEM charge pipes. Includes a 1/8” bung for easy addition of either methanol or water injection.

Show More Show Less

CTS Turbo N20 Upgraded Charge Pipe - BMW F2X/F3X 228i/328i/428i N20/N...

T#:50899216

Part#: IT-808

Ships on Oct 21, 2026

$ 169.99 USD

Add to Wish List

Qty

$ 169.99 USD

Add to Wish List

Improve throttle response and reduce turbo lag with CTS Turbo's new Upgraded Charge Pipe. This aluminum charge pipe replaces BMW p/n 13717605044, which connects the intercooler to the throttle body and is constructed from plastic, which is known to crack and cause boost loss.

Show More Show Less

MMX Charge Pipe Kit - B58 F-Chassis

T#:4538265

Part#: MMR02-0503

Ships in 2 Business Days

$ 451.99 USD

Add to Wish List

Qty

$ 451.99 USD

Add to Wish List

MMX's high-flow charge pipe kit includes everything needed to improve the performance, reliability, and aesthetics of your B58-powered F-Chassis BMW. Smooth bore pipework improves airflow over stock and due to reducing deformation of the hoses under load or vacuum, the MMR charge pipes also improve throttle response and power output. Increased boost pressure can cause the stock pipework to split or crack and cause drivability issues. MMR's charge pipes are made of lightweight aluminum which fit right in place of OEM charge pipes. Includes a 1/8” bung for easy addition of either methanol or water injection. Features: Two high-flow aluminum charge pipes with CNC leak-free connections Silicone coupler hose o-ring gasket c-clip Jubilee clips x4 Throttle body bolts

Show More Show Less

CTS N55 Chargepipe - Xdrive

T#:584968

Part#: CTS-IT-805

Ships in 7 Business Days

$ 219.99 USD

Add to Wish List

Qty

$ 219.99 USD

Add to Wish List

The factory N55 chargepipe is made of plastic and is prone to failure especially as the mileage starts to add up. This replacement chargepipe from CTS Turbo installs easily and holds stock and increased boost levels with ease.

Show More Show Less

FTP Motorsport Charge Pipe - F22/23 F3X B48 B46

T#:578627

Part#: SG71386

Special Order: No Guaranteed ETA

$ 300.00 USD

Add to Wish List

Qty

$ 300.00 USD

Add to Wish List

The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. Smooth radius bends allow for the cleanest path for air to travel as well as increased diameter which allows a larger volume of compressed air to be ingested. Additionally, an pre-machined meth bung allows for the addition of this system at the point of installation or at a later date. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers Machined bung for meth injection

Show More Show Less

FTP Motorsport Intake Pipe - F22/23 F3X B58

T#:586882

Part#: SG71439

Special Order: No Guaranteed ETA

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

This intake pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory intake pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased air volume

Show More Show Less

FTP Turbo Inlet - F1X/F2X/F3X N20

T#:583743

Part#: SG71442

Special Order: No Guaranteed ETA

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume

Show More Show Less

FTP Turbo Inlet Pipe - F22 F3X F87 N55

T#:582215

Part#: SG71443

Special Order: No Guaranteed ETA

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

The Inlet pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. The FTP inlet pipe replaces the factory hose between the air filter and turbo and will not expand under boost. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume Eliminates factory sound chamber

Show More Show Less

FTP Motorsport Charge Pipe & Boost Pipe Package - F2X/F3X N55 ...

T#:578662

Part#: SG71337F

Special Order: No Guaranteed ETA

$ 370.00 USD

Add to Wish List

Qty

$ 370.00 USD

Add to Wish List

This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume

Show More Show Less

Silicone Intake Inlet Upgrade - Black - F Chassis B58

Works with the factory BMW intake and most aftermarket intakes

T#:5269553

Part#: FB58INTKINLETBLK

Back Ordered

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

Smooths the airflow from the intake to the factory turbo inlet by removing the upper factory sound resonator and the lower accordion section of the air inlet pipe

FTP Motorsport Charge Pipe Replacement C Clip/O-ring - N54/N55 ...

T#:586830

Part#: SG71312FG-9

Special Order: No Guaranteed ETA

$ 24.95 USD

Add to Wish List

Qty

$ 24.95 USD

Add to Wish List

Replacement Intake pipe C-clip and o-ring.

FTP Motorsport Boost Pipe - F2X, F3X N20

T#:578639

Part#: SG71335-BP

Special Order: No Guaranteed ETA

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

This Boost pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. Connects turbo to intercooler. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers

Show More Show Less

FTP Motorsport Boost pipe - F2X, F3X N55

T#:582219

Part#: SG71337BP

Special Order: No Guaranteed ETA

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

This pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory piping is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers

Show More Show Less

FTP Motorsport Charge Pipe - F22/23 F3X G01 G11 G30/32 B58

For B58 Gen1 Engines Only - Will Not Fit B58 Gen2 (B58TU) Engines

T#:578620

Part#: SG71391

Special Order: No Guaranteed ETA

$ 270.00 USD

Add to Wish List

Qty

$ 270.00 USD

Add to Wish List

The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. Smooth radius bends allow for the cleanest path for air to travel as well as increased diameter which allows a larger volume of compressed air to be ingested. Additionally, an pre-machined meth bung allows for the addition of this system at the point of installation or at a later date. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers Machined bung for meth injection

Show More Show Less

FTP Motorsport High Performance Charge Pipe - F2X/F3X N55

T#:581354

Part#: SG71337

Special Order: No Guaranteed ETA

$ 270.00 USD

Add to Wish List

Qty

$ 270.00 USD

Add to Wish List

This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers

Show More Show Less

Silicone Intake Inlet Upgrade - Blue - F Chassis B58

Works with the factory BMW intake and most aftermarket intakes

T#:5269555

Part#: FB58INTKINLETBLU

Back Ordered

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

The Paradigm Engineering B58 BMW silicone intake pipe upgrade smooths the airflow from the intake to the factory turbo inlet by removing the upper factory sound resonator and the lower accordion section of the air inlet pipe.

Show More Show Less

VRSF N55 Turbo Outlet Charge Pipe O-Ring

We Price Match - Give Us A Call or Chat!

T#:589208

Part#: 609020

In Stock

$ 12.99 USD

Add to Wish List

Qty

$ 12.99 USD

Add to Wish List

Replace your stock O-ring when upgrading Charge Pipes

BMW N54 N55 S55 VRSF Charge Pipe Throttle Body O-Ring

We Price Match - Give Us A Call or Chat!

T#:928441

Part#: 609010

In Stock

$ 14.99 USD

Add to Wish List

Qty

$ 14.99 USD

Add to Wish List

Upgrade your N54, N55, or S55 BMW with this replacement o-ring designed for the charge pipe to throttle body connection. Over time, throttle body o-rings can wear out, leading to reduced performance and potential issues. With this replacement, you can ensure a proper seal and maintain the efficiency of your BMW's engine. Say goodbye to unwanted air leaks and hello to optimal performance.

Show More Show Less

FTP Motorsport Charge Pipe - F22/23 F3X G01 G11 G30/32 B58 (RED) ...

For Gen1 B58

T#:3047551

Part#: SG71391-R

Special Order: No Guaranteed ETA

$ 270.00 USD

Add to Wish List

Qty

$ 270.00 USD

Add to Wish List

The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. Smooth radius bends allow for the cleanest path for air to travel as well as increased diameter which allows a larger volume of compressed air to be ingested. Additionally, an pre-machined meth bung allows for the addition of this system at the point of installation or at a later date. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers Machined bung for meth injection

Show More Show Less

MMX Charge Pipe Kit - N20 F-Chassis Manual Cars

For Manual Cars Only

T#:4552006

Part#: MMR02-0701M

Special Order: No Guaranteed ETA

$ 489.99 USD

Add to Wish List

Qty

$ 489.99 USD

Add to Wish List

MMX's high-flow charge pipe kit includes everything needed to improve the performance, reliability, and aesthetics of your N20-powered F-Chassis BMW. Smooth bore pipework improves airflow over stock and due to reducing deformation of the hoses under load or vacuum, the MMR charge pipes also improve throttle response and power output. Increased boost pressure can cause the stock pipework to split or crack and cause drivability issues. MMR's charge pipes are made of lightweight aluminum which fit right in place of OEM charge pipes. Includes a 1/8” bung for easy addition of either methanol or water injection. Features: Three high-flow aluminium charge pipes with CNC leak-free connections Four silicone coupler hoses c-clips Jubilee clips

Show More Show Less

MMX Charge Pipe Kit - N55 F-Chassis (Manual)

For Manual Cars Only

T#:4551986

Part#: MMR02-0501M

Special Order: No Guaranteed ETA

$ 451.99 USD

Add to Wish List

Qty

$ 451.99 USD

Add to Wish List

MMR's high-flow charge pipe kit includes everything needed to improve the performance, reliability, and aesthetics of your N55-powered F-Chassis BMW. Smooth bore pipework improves airflow over stock and due to reducing deformation of the hoses under load or vacuum, the MMR charge pipes also improve throttle response and power output. Increased boost pressure can cause the stock pipework to split or crack and cause drivability issues. MMR's charge pipes are made of lightweight aluminum which fit right in place of OEM charge pipes. For the intake side. Includes a 1/8” bung for easy addition of either methanol or water injection. Features: Two replacement high-flow aluminum charge pipes with CNC leak-free connections Silicone coupler hose Replacement c-clip Jubilee clips o-ring

Show More Show Less

MMX Charge Pipe Kit - N55 F-Chassis (Automatic)

For Automatic Cars Only

T#:4551985

Part#: MMR02-0501A

Special Order: No Guaranteed ETA

$ 451.99 USD

Add to Wish List

Qty

$ 451.99 USD

Add to Wish List

MMX's high-flow charge pipe kit includes everything needed to improve the performance, reliability, and aesthetics of your N55-powered F-Chassis BMW. Smooth bore pipework improves airflow over stock and due to reducing deformation of the hoses under load or vacuum, the MMR charge pipes also improve throttle response and power output. Increased boost pressure can cause the stock pipework to split or crack and cause drivability issues. MMR's charge pipes are made of lightweight aluminum which fit right in place of OEM charge pipes. For the intake side. Includes a 1/8” bung for easy addition of either methanol or water injection. Features: Two replacement high-flow aluminum charge pipes with CNC leak-free connections Silicone coupler hose Replacement c-clip Jubilee clips o-ring

Show More Show Less

MMX Charge Pipe Kit - N20 F-Chassis Automatic Cars

For Automatic Cars Only

T#:4551994

Part#: MMR02-0701A

Special Order: No Guaranteed ETA

$ 489.99 USD

Add to Wish List

Qty

$ 489.99 USD

Add to Wish List

MMX's high-flow charge pipe kit includes everything needed to improve the performance, reliability, and aesthetics of your N20-powered F-Chassis BMW. Smooth bore pipework improves airflow over stock and due to reducing deformation of the hoses under load or vacuum, the MMR charge pipes also improve throttle response and power output. Increased boost pressure can cause the stock pipework to split or crack and cause drivability issues. MMR's charge pipes are made of lightweight aluminum which fit right in place of OEM charge pipes. Includes a 1/8” bung for easy addition of either methanol or water injection. Features: Three high-flow aluminium charge pipes with CNC leak-free connections Four silicone coupler hoses c-clips Jubilee clips

Show More Show Less

Project Cars

SELECT YOUR BMW

Charge Pipes & Turbo Inlets for BMW 3 Series F34 (2014+)

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results