Charge Pipes & Turbo Inlets for BMW 3 Series F34 (2014+)

Paradigm Engineering Turbo Inlet Upgrade - F Chassis B58

T#:5269549

Part#: FCHASTURBINLET

Ships in 1-3 days

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Paradigm Engineering's F Chassis B58 BMW upgraded Turbo Inlet/Resonator delete pipe maximizes and smooths airflow from the intake to the turbo by removing all restrictions and increasing air flow for more power and better turbo efficiency. Paradigm Engineering's F Chassis Turbo Inlet pipe is a direct replacement for the restrictive OEM unit.

Show More Show Less

Evolution Raceworks B48 Charegepipe - Black Anodized - BMW F22/23 F3X...

T#:587528

Part#: BM-ICP019-T3

Ships on Oct 6, 2026

$ 359.99 USD

Add to Wish List

Qty

$ 359.99 USD

Add to Wish List

The factory charge pipes are made of plastic, which is fine for stock boost levels but does not hold up well under higher boost levels. The solution is to replace that plastic piece with a hard aluminum one from Evolution Racewerks. 6061 high-grade aluminum not only stands up to whatever you can throw at it, but it looks great at the same time. Don't risk detonating that 400.00 plastic pipe from BMW. Swap yours out and avoid the headache of needing to call a tow-truck or drive home in limp. Features: Increase throttle response and decreases turbo lag. Lightweight High Grade 6061 Aluminum Piping. Replaces the factory soft plastic charge pipe that is prone to breaking under high boost. Retains factory-style o-ring c-clip lock flange. Precision CNC machined MAP sensor and IAT flanges ensure a leak-free connection. Charge Pipe features beaded ends and T-bolt clamps to prevent intercooler piping from coming off from boost. Silicone Hump Hose included. Type III Hard Black Anodizing (for stealth and OEM look). Hard anodizing helps improve the durability of intercooler piping. Resists bent or dented piping. Compatible with the factory electronic diverter valve. Includes all hardware for a complete installation. Limited Lifetime Warranty.

Show More Show Less

Silicone Intake Inlet Upgrade - Red - F Chassis B58

Works with the factory BMW intake and most aftermarket intakes

T#:5269554

Part#: FB58INTKINLETRED

Ships in 3 Business Days

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

The Paradigm Engineering B58 BMW silicone intake pipe upgrade smooths the airflow from the intake to the factory turbo inlet by removing the upper factory sound resonator and the lower accordion section of the air inlet pipe.

Show More Show Less

FTP Motorsport Charge Pipe and Boost Pipe Kit - F3X N20

T#:578680

Part#: SG71335F

Back Ordered

$ 370.00 USD

Add to Wish List

Qty

$ 370.00 USD

Add to Wish List

This charge pipe kit from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipes are made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. This set of pipes will not only allow the engine to hold more boost, but they will outlast the stock indefinitely. Aluminum is also a rigid material, meaning it doesn't deform or flex very easily. What this translates to is increased reliability since an aluminum pipe cant flex and decouple itself as plastic does. One more feature to note is the 1/8"NPT fitting in the throttle body pipe. This can be used as the perfect point for a methanol injector or port injection nozzle. Comes with a threaded plug to seal the port until it is needed. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 1/8" NPT bung with plug

Show More Show Less

Forge B58 Charge Pipe Set - All B58

T#:586966

Part#: FMBP3

Ships in 5 Business Days

$ 626.99 USD

Add to Wish List

Qty

$ 626.99 USD

Add to Wish List

BMWs, OEM charge pipe can become brittle and will generally fail under increased boost pressure. To combat this, Forge has developed a replacement with an increased diameter which helps to reduce turbulence and maximize airflow into the engine.

Show More Show Less

Turbo Intercooler Hose

2X Entries Into Our F80 M3 Sweepstakes

T#:4826899

Part#: 13717597591

Ships in 1 Business Day

$ 80.99 USD

Add to Wish List

Qty

$ 80.99 USD

Add to Wish List

Rein intercooler charge hose replacment.

FTP Motorsport Charge Pipe - F22/23 F3X B48 B46

T#:578627

Part#: SG71386

Special Order: No Guaranteed ETA

$ 300.00 USD

Add to Wish List

Qty

$ 300.00 USD

Add to Wish List

The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. Smooth radius bends allow for the cleanest path for air to travel as well as increased diameter which allows a larger volume of compressed air to be ingested. Additionally, an pre-machined meth bung allows for the addition of this system at the point of installation or at a later date. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers Machined bung for meth injection

Show More Show Less

FTP Motorsport Intake Pipe - F22/23 F3X B58

T#:586882

Part#: SG71439

Special Order: No Guaranteed ETA

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

This intake pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory intake pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased air volume

Show More Show Less

FTP Turbo Inlet - F1X/F2X/F3X N20

T#:583743

Part#: SG71442

Special Order: No Guaranteed ETA

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume

Show More Show Less

FTP Turbo Inlet Pipe - F22 F3X F87 N55

T#:582215

Part#: SG71443

Special Order: No Guaranteed ETA

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

The Inlet pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. The FTP inlet pipe replaces the factory hose between the air filter and turbo and will not expand under boost. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume Eliminates factory sound chamber

Show More Show Less

FTP Motorsport Charge Pipe & Boost Pipe Package - F2X/F3X N55 ...

T#:578662

Part#: SG71337F

Special Order: No Guaranteed ETA

$ 370.00 USD

Add to Wish List

Qty

$ 370.00 USD

Add to Wish List

This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume

Show More Show Less

Silicone Intake Inlet Upgrade - Black - F Chassis B58

Works with the factory BMW intake and most aftermarket intakes

T#:5269553

Part#: FB58INTKINLETBLK

Back Ordered

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

Smooths the airflow from the intake to the factory turbo inlet by removing the upper factory sound resonator and the lower accordion section of the air inlet pipe

FTP Motorsport Charge Pipe Replacement C Clip/O-ring - N54/N55 ...

T#:586830

Part#: SG71312FG-9

Special Order: No Guaranteed ETA

$ 24.95 USD

Add to Wish List

Qty

$ 24.95 USD

Add to Wish List

Replacement Intake pipe C-clip and o-ring.

FTP Motorsport Boost Pipe - F2X, F3X N20

T#:578639

Part#: SG71335-BP

Special Order: No Guaranteed ETA

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

This Boost pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. Connects turbo to intercooler. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers

Show More Show Less

FTP Motorsport Boost pipe - F2X, F3X N55

T#:582219

Part#: SG71337BP

Special Order: No Guaranteed ETA

$ 180.00 USD

Add to Wish List

Qty

$ 180.00 USD

Add to Wish List

This pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory piping is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers

Show More Show Less

FTP Motorsport Charge Pipe - F22/23 F3X G01 G11 G30/32 B58

For B58 Gen1 Engines Only - Will Not Fit B58 Gen2 (B58TU) Engines

T#:578620

Part#: SG71391

Special Order: No Guaranteed ETA

$ 270.00 USD

Add to Wish List

Qty

$ 270.00 USD

Add to Wish List

The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. Smooth radius bends allow for the cleanest path for air to travel as well as increased diameter which allows a larger volume of compressed air to be ingested. Additionally, an pre-machined meth bung allows for the addition of this system at the point of installation or at a later date. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers Machined bung for meth injection

Show More Show Less

FTP Motorsport High Performance Charge Pipe - F2X/F3X N55

T#:581354

Part#: SG71337

Special Order: No Guaranteed ETA

$ 270.00 USD

Add to Wish List

Qty

$ 270.00 USD

Add to Wish List

This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers

Show More Show Less

Silicone Intake Inlet Upgrade - Blue - F Chassis B58

Works with the factory BMW intake and most aftermarket intakes

T#:5269555

Part#: FB58INTKINLETBLU

Back Ordered

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

The Paradigm Engineering B58 BMW silicone intake pipe upgrade smooths the airflow from the intake to the factory turbo inlet by removing the upper factory sound resonator and the lower accordion section of the air inlet pipe.

Show More Show Less

Rein Coolant Return Line - BMW F22/23 M240i, F30/31/34 340i, F32/33/3...

2X Entries Into Our F80 M3 Sweepstakes

T#:49404664

Part#: 11538666857

Back Ordered

$ 28.99 USD

Add to Wish List

Qty

$ 28.99 USD

Add to Wish List

Keep your BMW’s B58 engine running cool and efficiently with the Rein CHT0964B Turbocharger Coolant Hose.

Rein Air Intake Tube - Priced Each

2X Entries Into Our F80 M3 Sweepstakes

T#:17738367

Part#: 13717605638

In Stock

$ 95.06 USD

Add to Wish List

Qty

$ 95.06 USD

Add to Wish List

Reins OE Air Intake tube is designed to stop pressure build-up in the engine at a more affordable cost.

Coolant Hose

2X Entries Into Our F80 M3 Sweepstakes

T#:57616349

Part#: 11538666856

Ships in 3 Business Days

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

This Rein turbocharger coolant line provides a factory-grade solution engineered to meet the strict performance standards your vehicle demands.

FTP Motorsport Charge Pipe - F22/23 F3X G01 G11 G30/32 B58 (RED) ...

For Gen1 B58

T#:3047551

Part#: SG71391-R

Special Order: No Guaranteed ETA

$ 270.00 USD

Add to Wish List

Qty

$ 270.00 USD

Add to Wish List

The factory charge pipe is made from plastic to reduce weight and manufacturing costs. While this is great for the production line and the sticker price, it doesn't hold up well as the engine ages or in the case of increased power. Replacing the weak plastic stock part with a solid aluminum one like this will ensure proper functionality under higher levels of boost and eliminate wear caused by the heating and cooling of plastic pipes. This charge pipe from FTP motorsports will not only improve flow over stock but also make a big improvement in the reliability column. Smooth radius bends allow for the cleanest path for air to travel as well as increased diameter which allows a larger volume of compressed air to be ingested. Additionally, an pre-machined meth bung allows for the addition of this system at the point of installation or at a later date. Features: Smooth bends for unobstructed flow Direct OEM replacement Larger than stock diameter for increased charge-air volume 3-Ply silicon couplers Machined bung for meth injection

Show More Show Less

Project Cars

SELECT YOUR BMW

Charge Pipes & Turbo Inlets for BMW 3 Series F34 (2014+)

Paradigm Engineering Turbo Inlet Upgrade - F Chassis B58

Evolution Raceworks B48 Charegepipe - Black Anodized - BMW F22/23 F3X...

Silicone Intake Inlet Upgrade - Red - F Chassis B58

FTP Motorsport Charge Pipe and Boost Pipe Kit - F3X N20

Forge B58 Charge Pipe Set - All B58

Turbo Intercooler Hose

FTP Motorsport Charge Pipe - F22/23 F3X B48 B46

FTP Motorsport Intake Pipe - F22/23 F3X B58

FTP Turbo Inlet - F1X/F2X/F3X N20

FTP Turbo Inlet Pipe - F22 F3X F87 N55

FTP Motorsport Charge Pipe & Boost Pipe Package - F2X/F3X N55 ...

Silicone Intake Inlet Upgrade - Black - F Chassis B58

FTP Motorsport Charge Pipe Replacement C Clip/O-ring - N54/N55 ...

FTP Motorsport Boost Pipe - F2X, F3X N20

FTP Motorsport Boost pipe - F2X, F3X N55

FTP Motorsport Charge Pipe - F22/23 F3X G01 G11 G30/32 B58

FTP Motorsport High Performance Charge Pipe - F2X/F3X N55

Silicone Intake Inlet Upgrade - Blue - F Chassis B58

Rein Coolant Return Line - BMW F22/23 M240i, F30/31/34 340i, F32/33/3...

Rein Air Intake Tube - Priced Each

Coolant Hose

FTP Motorsport Charge Pipe - F22/23 F3X G01 G11 G30/32 B58 (RED) ...

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results