Intake Manifold Assemblies for BMW 3 Series F34 (2014+)

EVO1 Performance Intake Manifold W/ Integrated Intercooler - BMW Gen1...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Pre-order now - Available late-April / early-May!

T#:14982194

Part#: 200001204

In Stock

$ 2,690.00 USD

Add to Wish List

Qty

$ 2,690.00 USD

Add to Wish List

The 3.0 Liter B58 turbo engine of the specified BMW models is equipped with an indirect charge-air cooling circuit. So the cooling of the charged air is realized by a water-cooled intercooler, which is integrated directly into the intake manifold. The WAGNERTUNING intake manifold with integrated intercooler has got a new performance core which was specially developed for the high requirements and individual mounting position of the B58.1 engine and offers 128% more external core volume compared to the original intercooler. The calculated ratio between the inner and outer cooling surface generates a maximum heat transfer and at the same time the best possible internal airflow. With the help of CFD simulations, the CNC-milled end tanks were designed for optimal airflow conditions. The result is an excellent cooling property with minimal back pressure. That`s why this kit is also perfect for racing use. An optimal cooling effect of the charged air with a significant increase in performance! All WAGNERTUNING radiators are equipped with a heat-conductive anti-corrosion coating to ensure a lasting cooling effect. The plug & play installation of the system is simple and easy to perform (an installation instruction is included as well). Advantages of this product: significantly better cooling performance (up to 20°C cooler IAT) maximum mechanical discharge of the turbocharger (35% less back pressure) more power and torque for your engine 100% pressure resistance 100% Plug and Play (no modifications) preprocessed port fuel injection (Fuel Rail not included) three 1/8 NPT ports for measuring additional parameters six preprocessed NOS or WMI ports (Nozzles not included) this intake manifold is suitable for all performance levels up to 4 years warranty important information for oil service: the oil filter still can be replaced without removing the intake manifold again!

Show More Show Less

CSF High Performance Charge Air Cooer Manifold - Polished Finish - Ge...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:27138573

Part#: 8300

Ships on Jul 31, 2026

$ 3,995.00 USD

Add to Wish List

Qty

$ 3,995.00 USD

Add to Wish List

CSF has had tremendous success with its Gen 2 B58 “Super Manifold” for G-Chassis BMW and Supra with over 450 units sold and counting (CSF #8200/8200B/8200C). Due to its industry-leading design and proven performance, CSF has received countless requests to engineer its “Super Manifold” for the Gen 1 B58 F-Chassis BMW platform. Finally, the wait is over for Gen 1 B58 customers! The “Super Manifold” is now available for your BMW. You no longer have to settle for a lower-quality product. The Gen 1 B58 Charge-Air-Cooler Manifold has all the same features and specs as the lasted version of the CSF Gen 2 manifold. This also includes some additional improvements for a better fit and finish over the competition. Utilizes a High Performance, Motorsports-Grade Bar/Plate Air-to-Water Intercooler Core Double the Capacity of the OEM Core (12 Rows of Water Cooling vs. OEM 6 Rows) Significantly Lower Pressure Drop Across the Core Compared to OEM Designed in SolidWorks Using Computational Fluid Dynamics (CFD) Integrated Air Divider in Inlet Tank Evenly Distributes Airflow Throughout the Core Improved slotted mounting holes on throttle body side for easier installation. Easy Access to Spin-Off Oil Filter for Quick Oil Changes – No Need to Uninstall Manifold Every Oil Change Counter Balanced Design for Optimized Airflow Integrated Sensor Pad with Three 1/8' NPT Ports to Measure Additional Parameters Included Optional Fuel Rail for Top Feed Port Injection Individual Port Injection Bungs on Each Cylinder Runner (Comes Pre-Plugged) Individual 1/8' NPT Ports on the Top of Each Cylinder Runner for Nitrous or Meth Injection Allows for Even Spray Distribution and Control for Maximum Performance and Engine Protection Individual 1/8' NPT Breather Ports for Both Inlet/Outlet Water Connections on Back of Manifold for Easy Air-Bleeding of the System Included KIYLEX Thermal Rejection Manifold Spacer* Made from KIYLEX® – A patented revolutionary high-performance final stage polymer Acts as a thermal barrier that dissipates heat between the cylinder head and intake manifold Proven to lower intake manifold temperatures by up to 15% Lowers Intake Air Temps (IATs) Plug-and-Play design, Requiring No Modifications to Install Includes Hardware and Installation Kit with Picture Diagrams Containing 32 Different Parts for Easy Installation In development of the Charge-Air-Cooler Manifold for the Gen 2 B58, CSF conducted extensive testing on the dyno with R&D partner VF Engineering. This consisted of over 50 dyno runs on the same car, on the same day, in relatively hot ambient conditions (~90°F) comparing the performance of the CSF Charge-Air Cooler Manifold to the OEM. Both the CSF and OEM cooler went through roughly 25 back-to-back dyno pulls every 30 seconds to measure the performance of the car overtime, resistance to heat soak, recovery time, and the effect on the turbo system duty cycle. This in-depth and thorough testing sets CSF apart from the competition. Because the CSF #8300 is the same overall design as the CSF #8200 with some small design adjustments to fit the Gen 1 B58, there is no question that it will perform. The Gen 2 B58 “Super Manifold” (CSF #8200) has been real-world tested and proven in some of the most extreme motorsport competitions around the world. It has stood up to the rigors of the Pikes Peak International Hill Climb, Global Time Attack competitions, and Texas 2K drag racing, just to name a few. In addition, it has also been dyno-proven on many vehicles pushing over 1000 whp. While there are countless features and details to show just how superior the CSF Manifold is, real-world examples speak louder than words. Disclaimer: CSF pressure tests each #8300 manifold at 60-70 PSI for a period of 2-3 minutes during the Quality Control and Inspection process. The CSF manifold is not designed to operate above 60 PSI. Any users who chose to operate their vehicle with the CSF manifold over 60 PSI does so at their own risk. Operation at these pressure levels will void the CSF Limited 2 Year Warranty.

Show More Show Less

CSF High Performance Charge Air Cooer Manifold - Thermal Black Finish...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:27138574

Part#: 8300B

Back Ordered

$ 4,295.00 USD

Add to Wish List

Qty

$ 4,295.00 USD

Add to Wish List

CSF has had tremendous success with its Gen 2 B58 “Super Manifold” for G-Chassis BMW and Supra with over 450 units sold and counting (CSF #8200/8200B/8200C). Due to its industry-leading design and proven performance, CSF has received countless requests to engineer its “Super Manifold” for the Gen 1 B58 F-Chassis BMW platform. Finally, the wait is over for Gen 1 B58 customers! The “Super Manifold” is now available for your BMW. You no longer have to settle for a lower-quality product. The Gen 1 B58 Charge-Air-Cooler Manifold has all the same features and specs as the lasted version of the CSF Gen 2 manifold. This also includes some additional improvements for a better fit and finish over the competition. Utilizes a High Performance, Motorsports-Grade Bar/Plate Air-to-Water Intercooler Core Double the Capacity of the OEM Core (12 Rows of Water Cooling vs. OEM 6 Rows) Significantly Lower Pressure Drop Across the Core Compared to OEM Designed in SolidWorks Using Computational Fluid Dynamics (CFD) Integrated Air Divider in Inlet Tank Evenly Distributes Airflow Throughout the Core Improved slotted mounting holes on throttle body side for easier installation. Easy Access to Spin-Off Oil Filter for Quick Oil Changes – No Need to Uninstall Manifold Every Oil Change Counter Balanced Design for Optimized Airflow Integrated Sensor Pad with Three 1/8' NPT Ports to Measure Additional Parameters Included Optional Fuel Rail for Top Feed Port Injection Individual Port Injection Bungs on Each Cylinder Runner (Comes Pre-Plugged) Individual 1/8' NPT Ports on the Top of Each Cylinder Runner for Nitrous or Meth Injection Allows for Even Spray Distribution and Control for Maximum Performance and Engine Protection Individual 1/8' NPT Breather Ports for Both Inlet/Outlet Water Connections on Back of Manifold for Easy Air-Bleeding of the System Included KIYLEX Thermal Rejection Manifold Spacer* Made from KIYLEX® – A patented revolutionary high-performance final stage polymer Acts as a thermal barrier that dissipates heat between the cylinder head and intake manifold Proven to lower intake manifold temperatures by up to 15% Lowers Intake Air Temps (IATs) Plug-and-Play design, Requiring No Modifications to Install Includes Hardware and Installation Kit with Picture Diagrams Containing 32 Different Parts for Easy Installation In development of the Charge-Air-Cooler Manifold for the Gen 2 B58, CSF conducted extensive testing on the dyno with R&D partner VF Engineering. This consisted of over 50 dyno runs on the same car, on the same day, in relatively hot ambient conditions (~90°F) comparing the performance of the CSF Charge-Air Cooler Manifold to the OEM. Both the CSF and OEM cooler went through roughly 25 back-to-back dyno pulls every 30 seconds to measure the performance of the car overtime, resistance to heat soak, recovery time, and the effect on the turbo system duty cycle. This in-depth and thorough testing sets CSF apart from the competition. Because the CSF #8300 is the same overall design as the CSF #8200 with some small design adjustments to fit the Gen 1 B58, there is no question that it will perform. The Gen 2 B58 “Super Manifold” (CSF #8200) has been real-world tested and proven in some of the most extreme motorsport competitions around the world. It has stood up to the rigors of the Pikes Peak International Hill Climb, Global Time Attack competitions, and Texas 2K drag racing, just to name a few. In addition, it has also been dyno-proven on many vehicles pushing over 1000 whp. While there are countless features and details to show just how superior the CSF Manifold is, real-world examples speak louder than words. Disclaimer: CSF pressure tests each #8300 manifold at 60-70 PSI for a period of 2-3 minutes during the Quality Control and Inspection process. The CSF manifold is not designed to operate above 60 PSI. Any users who chose to operate their vehicle with the CSF manifold over 60 PSI does so at their own risk. Operation at these pressure levels will void the CSF Limited 2 Year Warranty.

Show More Show Less