Harnesses & Harness Accessories for BMW 3 Series F34 (2014+)

Clear BMW chassis

RaceQuip 5 Point Latch And Link 3" Racing Harness - SFI 16.1 Approved
RaceQuip 5 Point Latch And Link 3" Racing Harness - SFI 16.1 Ap...
Racing harnesses are required at any respectable track or...
Racequip - Corporate Logo
T#:403220
Part#: 7110XX5PT
In Stock
Starting at $69.95
Starting at $69.95

Racing harnesses are required at any respectable track or strip, but they tend to run upwards of hundreds of dollars. RaceQuip designs and builds safety equipment for just this issue! Since 1975, RaceQuip has been building some of the highest quality racing safety gear on the market. Their high quality and low cost safety gear is the result of wanting to provide "The Best Value in Safety", that keeps drivers safe without draining their wallet.

This Standard 5 Point Latch and Link Racing harness is RaceQuips most popular racing harness, priced at $74.99 or below while still being fully SFI 16.1 Approved.

All harness systems are constructed using drop-forged steel hardware for ultimate strength and reduced weight. All hardware is cadmium plated for added protection. They use only 3" premium polyester webbing and all belts are box-x pattern sewn to ensure uniform stitch length and strength. Belts and hardware are routinely tested to verify compliance with SFI 16.1 standards.

All of their harness sets feature a latch & link system to retain the belts. The latch & link system is distinguished by a pivoting "hammer," called a Duckbill, which locks all of the belts into place by snapping down into a detent. Both shoulder belts and the sub belt are hooked over the link; the link is inserted into the latch; the Duckbill is then brought down into and over the link, securely holding all of the pieces in place.

RaceQuip Latch & Link Harness Systems come as a "pull down" design. This means that the lap belts must be pulled down and away from the center latch mechanism to tighten. Since their belts are "double adjustable", lengths are easily adjusted on either end for ease of installation. Using the included three bar slide you can mount the belts by either wrapping them around a rollbar or by bolting them in place. Snap-in ends and eyebolts are sold separately if you want to install your belts in that manner.

Features and Specifications:

  • Exceeds SFI 16.1 Rating (SFI Tags Affixed)
  • NOT D.O.T. / FMVSS Certified for On Highway Use
  • Premium 3" Polyester Webbing
  • Twin Individual Shoulder Belts
  • Pull Down Style Lap Belt
  • 5 Point Design - Single 2" Crotch Sub Strap
  • 3" Hardware Ends Installed
  • Double Adjustable for Ease of Installation
  • Wrap Around or Bolt-in Mounting
  • Drop-Forged Steel Hardware (no bolts)
  • Shoulders Adjust from 20" to 62"
  • Lap Belt Adjusts 20" to 60"
  • Available in Black, Red, Blue, Yellow, Orange, Purple, Platinum, Green and Pink
  • Can Be Re-webbed (SFI) Upon Expiration
Sabelt Eye-Bolt Back Plate
Sabelt Eye-Bolt Back Plate
Eye-Bolt Back Plate 65 mm X 65 mm X 3 mm 7/16" U...
Sabelt - Corporate Logo
T#:559179
Part#: CCMI0016
Direct Ship
New Item
$6.00
$6.00

Eye-Bolt Back Plate 65 mm X 65 mm X 3 mm 7/16" UNF Thread Welded Nut, 40 mm

Westfield Eyebolt
Westfield Eyebolt
Length - 50 mm. Long7/16"Grade 8.8Sold Individua...
Sabelt - Corporate Logo
T#:559196
Part#: CCMI0017
Direct Ship
New Item
$7.50
$7.50

Length - 50 mm. Long

7/16"

Grade 8.8

Sold Individually


Standard Eye-Bolt
Standard Eye-Bolt
Diameter - 7/16" UNF Thread Length - 23 mm, Tot...
Sabelt - Corporate Logo
T#:559195
Part#: 407005
Direct Ship
New Item
$7.00
$7.00

Diameter - 7/16" UNF

Thread Length - 23 mm,

Total length - 25 mm

Grade 8.8

Sold Individually


Sabelt FIA Approved 4-Point Saloon Racing Harness
Sabelt FIA Approved 4-Point Saloon Racing Harness
Sabelt is a global leader in development and manufacture ...
Sabelt - Corporate Logo
T#:552669
Part#: SAFIACCS4
Direct Ship
Starting at $260.00
Starting at $260.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

Sabelt FIA approved racing harnesses are designed in a variety of configurations to suit your exact need and vehicle. Found in some of the fastest competition vehicles in the world, you can rest assured that you're being held securely by some of the finest belts available. Made by hand in Italy, quality and consistency are second to none. Whether you choose a four or six point, with aluminum or steel hardware each belt is designed to hold up to the rigors of the racetrack and to perform flawlessly in the event of a collision.

Features:

  • Shoulder straps: full 3aEURtmaEURtm width - steel adjuster
  • Shoulder fixing: snap hook - tribar
  • Lap belts: full 3aEURtmaEURtm width aEUR" steel adjuster Pull Up - snap hook fixing
  • Buckle fixed to lap belt
Sabelt ECE Approved 3-Point Clubman Belt
Sabelt ECE Approved 3-Point Clubman Belt
Sabelt is a global leader in development and manufacture ...
Sabelt - Corporate Logo
T#:552834
Part#: SACB4
Direct Ship
Starting at $165.00
Starting at $165.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

Features:

  • 3 fixing points
  • Shoulder straps: 2" with steel adjusters
  • Lap belts: 2" with steel adjusters and clubman style buckle

Sabelt ECE Approved 3-Point Clubman Belt
Sabelt ECE Approved 3-Point Clubman Belt
Sabelt is a global leader in development and manufacture ...
Sabelt - Corporate Logo
T#:552835
Part#: SACB5
Direct Ship
Starting at $160.00
Starting at $160.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

Features:

  • 3 fixing points
  • Shoulder straps: 2" with steel adjusters
  • Lap belts: 2" with steel adjusters and clubman style buckle
Sabelt FIA Approved 6-Point Saloon Rally Racing Harness
Sabelt FIA Approved 6-Point Saloon Rally Racing Harness
Sabelt is a global leader in development and manufacture ...
Sabelt - Corporate Logo
T#:552661
Part#: SAFIACCS2
Direct Ship
Starting at $295.00
Starting at $295.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

Sabelt FIA approved racing harnesses are designed in a variety of configurations to suit your exact need and vehicle. Found in some of the fastest competition vehicles in the world, you can rest assured that you're being held securely by some of the finest belts available. Made by hand in Italy, quality and consistency are second to none. Whether you choose a four or six point, with aluminum or steel hardware each belt is designed to hold up to the rigors of the racetrack and to perform flawlessly in the event of a collision.

Features:aEUR<

  • Shoulder straps: full 2aEURtmaEURtm width - steel adjuster
  • Shoulder fixing: snap hook - tribar
  • Lap belts: full 2aEURtmaEURtm width aEUR" steel adjuster Pull Up - snap hook fixing
  • New compact buckle designed with crotch slots integrated to main body
  • Crotch straps: 2aEURtmaEURtm width - snap hook / tribar fixing

Sabelt ECE Approved 3-Point Clubman Belt
Sabelt ECE Approved 3-Point Clubman Belt
Sabelt is a global leader in development and manufacture ...
Sabelt - Corporate Logo
T#:552836
Part#: SACB6
Direct Ship
Starting at $135.00
Starting at $135.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

Features:

  • 3 fixing points
  • Shoulder straps: 2" with steel adjusters
  • Lap belts: 2" with steel adjusters and clubman style buckle

Race-Quip Black Racing Harness Pads
Race-Quip Black Racing Harness Pads
RaceQuip harness pads are made with flame retardant foam,...
Racequip - Corporate Logo
T#:403222
Part#: 767001
Direct Ship
$14.95
$14.95

RaceQuip harness pads are made with flame retardant foam, covered with fire retardant PyrovatexA(r) and feature easy on/easy off hook and loop attachment. Designed for use with both 2" and 3" wide belts. Available in black only.

Features:

  • Made with Flame Retardant Foam Padding
  • Features an PyrovatexA(r) FRC Cover with Hook and Loop Closure
  • Designed to Add Comfort When Using 2" or 3aEUR Wide Belts
  • Available in Black Only
Sabelt FIA Approved 6-Point Saloon Rally Racing Harness
Sabelt FIA Approved 6-Point Saloon Rally Racing Harness
Sabelt is a global leader in development and manufacture ...
Sabelt - Corporate Logo
T#:552831
Part#: SAFIACCS3
Direct Ship
Starting at $295.00
Starting at $295.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

Sabelt FIA approved racing harnesses are designed in a variety of configurations to suit your exact need and vehicle. Found in some of the fastest competition vehicles in the world, you can rest assured that you're being held securely by some of the finest belts available. Made by hand in Italy, quality and consistency are second to none. Whether you choose a four or six point, with aluminum or steel hardware each belt is designed to hold up to the rigors of the racetrack and to perform flawlessly in the event of a collision.

Features:

  • Shoulder straps: full 3aEURtmaEURtm width - aluminum lightweight adjuster
  • Shoulder fixing: snap hook - tribar
  • Lap belts: full 3aEURtmaEURtm width - aluminum lightweight adjuster Pull Up-snap hook fixing
  • New compact buckle designed with crotches slots integrated to main body
  • Crotch straps: 2aEURtmaEURtm width - snap hook / tribar fixing
Sabelt ECE Approved 4-Point Clubman Belt
Sabelt ECE Approved 4-Point Clubman Belt
Sabelt is a global leader in development and manufacture ...
Sabelt - Corporate Logo
T#:552832
Part#: SACB2
Direct Ship
Starting at $163.00
Starting at $163.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

Features:

  • 4 fixing points
  • Shoulder straps: 2" with steel adjusters
  • Lap belts: 2" with steel adjusters and clubman style buckle
  • Shoulder pads included


Standard Eyebolt
Standard Eyebolt
Thread Length - 32 mm 7/16&quot; UNFGrade 8.8Sold Ind...
Sabelt - Corporate Logo
T#:559197
Part#: CCMI0018
Direct Ship
New Item
$5.00
$5.00

Thread Length - 32 mm

7/16" UNF

Grade 8.8

Sold Individually

Sabelt FIA Approved GT Racing Harness
Sabelt - Corporate Logo
T#:552640
Part#: SAFIACFC1
Direct Ship
Starting at $550.00
Starting at $550.00
Sabelt ECE Approved 4-Point Clubman Belt
Sabelt ECE Approved 4-Point Clubman Belt
Sabelt is a global leader in development and manufacture ...
Sabelt - Corporate Logo
T#:552830
Part#: SACB1
Direct Ship
Starting at $145.00
Starting at $145.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

Features:

  • 4 fixing points
  • Shoulder straps: 2" with steel adjusters
  • Lap belts: 2" with steel adjusters and clubman style buckle
  • Shoulder pads included

RaceQuip FIA/SFI Approved Camlock Black Racing Harness Set
RaceQuip FIA/SFI Approved Camlock Black Racing Harness Set ...
RaceQuip FIA Camlock Harness Sets feature an ultra-lightw...
Racequip - Corporate Logo
T#:403292
Part#: 751001
Direct Ship
$199.95
$199.95

RaceQuip FIA Camlock Harness Sets feature an ultra-lightweight magnesium alloy cam buckle with an activation lever that points downward. The FIA cam buckle utilizes a wide engagement cone for easy snap-in. A 45Es(right or left) unlatch movement prevents accidental opening and precise spring pressure provides a positive feel. All RaceQuip FIA Approved belts are constructed using premium 3aEUR Polyester webbing that is transverse mono filament woven to provide increased strength and smoother edges. Premium aluminum shoulder adjusters come standard on all RaceQuip FIA approved harness sets.

The RaceQuip 751 Series Camlock belt set offers many professional features yet affordable pricing for the grassroots racer. This Camlock belt set comes in a six (6) point configuration with a pull-down lap belt design. The harness sets not only exceed the SFI 16.1 specification, they also pass the stringent FIA 8853/98 standard. This aEURoedual certificationaEUR allows racers in some sanctions (SCCA, NASA, etc.) to use these belts for five years instead of just two.

They start with a super-lightweight 165 gram magnesium alloy cam buckle. The buckle features an engagement cone which allows the belts to snap into the cam mechanism at angles of 21Es left or right and 11Es up and down for ease of engagement. Precise internal spring pressure allows a positive feel on the 45Es (right or left) unlatch movement that reduces the chance of accidental opening.

Next, the forged SAE 4130 steel buckle hardware is sewn onto the premium 3aEUR polyester webbing, called aEURoetransverse mono filament wovenaEUR, which means that there are mono filament fibers inter-woven into the straps in a pattern that transverses the standard weave. This design accomplishes two tasks - added strength and smoother edges on the belts. The harness sets also feature premium, lightweight, non-slip aluminum shoulder adjusters with easy lift grips. The lap belt adjusters utilize an anti-slip tensioner device as well. Heavy-duty forged steel SAE 1050 3" slide bars and 3" bolt on ends come already installed, but they can be easily removed if you prefer to mount your belts by wrapping them around a rollbar or you can change them out to snap-hook ends. Belt adjustment lengths are 20aEUR to 68aEUR for shoulders and 20aEUR to 68aEUR for the lap belt.

Features and Specifications:

  • Lightweight 165 gram Magnesium Alloy Cam Buckle
  • Exceeds Stringent FIA 8853/98 Standard (FIA Tags Affixed)
  • Surpasses SFI 16.1 Rating (SFI Tags Affixed)
  • 6 Point Design - Dual 2" Crotch Strap
  • NOT D.O.T. / FMVSS Certified for On Highway Use
  • Pull Down Lap Belt Adjusters
  • Wide Engagement Cone For Easy Snap In
  • Precise Spring Pressure for a Positive Feel
  • 45Adeg (right or left) Unlatch Movement Mitigates Accidental Opening
  • Cam Buckle Stays Affixed to the Right Lap Belt
  • Heavy-Duty Drop-Forged Steel Hardware Ends Installed (no bolts)
  • Wrap Around or Bolt-in Mounting
  • Premium 3aEUR Polyester Webbing
  • Transverse Mono Filament Woven for Increased Strength and Smoother Edges
  • Premium Aluminum Shoulder Adjusters
  • Shoulder Belt Adjustment Length is 20" to 68"
  • Lap Belt is Adjustable from 20" to 68"
  • Can Be Re-Webbed (SFI Cert.) Upon Expiration
  • Available in Black Only

Sabelt FIA Approved 6-Point GT Saloon Racing Harness
Sabelt FIA Approved 6-Point GT Saloon Racing Harness
Sabelt is a global leader in development and manufacture ...
Sabelt - Corporate Logo
T#:552645
Part#: SAFIACCA1
Direct Ship
Starting at $495.00
Starting at $495.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

Sabelt FIA approved racing harnesses are designed in a variety of configurations to suit your exact need and vehicle. Found in some of the fastest competition vehicles in the world, you can rest assured that you're being held securely by some of the finest belts available. Made by hand in Italy, quality and consistency are second to none. Whether you choose a four or six point, with aluminum or steel hardware each belt is designed to hold up to the rigors of the racetrack and to perform flawlessly in the event of a collision.

Features:

  • Shoulder straps: full 2aEURtmaEURtm width - aluminum lightweight adjuster
  • Shoulder fixing: snap hook - tribar
  • Lap belts: full 2aEURtmaEURtm width - lightweight carabinas
  • Lap belts: 2aEURtmaEURtm quick adjuster integrated to buckle tongue - Pull Down. Designed for GT/ Endurance
  • New compact buckle designed with crotches slots integrated to main body
  • Crotch straps: 2aEURtmaEURtm width - snap hook / tribar fixing
  • Yellow loops
  • Velcros on shoulders
  • Intercom wire fixing
RaceQuip 5 to 6 Point Latch And Link Harness Conversion - SFI 16.1 Approved
RaceQuip 5 to 6 Point Latch And Link Harness Conversion - SFI 16.1 A...
Racing harnesses are required at any respectable track or...
Racequip - Corporate Logo
T#:403247
Part#: RQ6PTCON
Direct Ship
Starting at $19.95
Starting at $19.95