BMW Cooling System Parts & Accessories for BMW 3 Series F34 (2014+)

Clear BMW chassis

Please ensure your correct model is selected

The cooling system is arguably the weakest point in numerous BMWs. If you drive an aging BMW or plan on taking your car to the track like we do, we recommend beefing up your cooling system before going to the track. Generally, the main components in your cooling system that are prone to failure include the following: expansion tank, factory hoses, water pump, thermostat, fan (especially if your vehicle comes factory with a clutch fan), and radiator. Factory BMW expansion tanks are plastic and prone to either breaking off at connection points or combusting. As factory rubber hoses age they either crack or break over time - we offer silicone cooling hose upgrades for most applications to avoid future failures. If you have an older vehicle, your water pump likely comes from the factory with a plastic impeller - we offer upgraded water pumps with metal impellers that are far more reliable. Newer model BMWs utilize electric water pumps - BMW spent millions of dollars engineering these water pumps, but they fail so often that we recommend replacing at 60,000 mile service intervals to avoid being stranded on the side of the road. In terms of thermostats, we offer various upgraded thermostats for racing applications. If your BMW utilizes a clutch fan from the factory, we have several options available in terms of universal electric fans - we recommend replacing these to avoid sending brittle plastic fan blades through your hood. For radiators, we recommend swapping out your radiator for one that does not use plastic connection points like your factory radiator.

Sub-Categories

Sort By:

Packaged by Turner - Corporate Logo
T#:554053
Part#: 11517604027KT1
In Stock
Sale - Save 25% $ 461.99

This product was last offered at the strikethrough price on
05-03-2026

$ 344.49 USD
Free Shipping
Sale - Save 25%
$ 461.99

This product was last offered at the strikethrough price on
05-03-2026

$ 344.49 USD
Free Shipping

The N20/n26 engined cars already suffer from reduced cooling area because of the factory intercooler, tight space under the hood, and of course heat from the turbo(s). BMW addressed these challenges a number of ways, including a dynamic, 'smart' electric water pump with increased output compared to normally aspirated models. The cooling demands mean additional stress on the major cooling components, especially the water pump and thermostat. 
 

Kit includes:

  • Mahle-Behr thermostat
  • Pierburg water pump
  • Genuine BMW coolant
  • Mounting hardware required for both the thermostat and water pump

 

This item fits the following BMWs: 
2014+ F22 BMW 228i 228i xDrive 
2014+ F23 BMW 228i 228i xDrive 
2012+ F30 BMW 328i 328i xDrive - Sedan 
2013+ F31 BMW 328i xDrive - Wagon 
2013+ F32 BMW 428i 428i xDrive - Coupe 
2013+ F33 BMW 428i Convertible 428i xDrive Convertible - Convertible 
2014+ F34 BMW 328i xDrive GT - Gran Tourismo 
2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 
2012+ F10 BMW 528i 528i xDrive 
2011+ F25 BMW X3 xDrive28i 
2015+ F26 BMW X4 xDrive28i 
2009+ E89 BMW Z4 sDrive28i

Show More Show Less
Packaged by Turner - Corporate Logo
T#:554075
Part#: 11537601158KT2
In Stock
Sale - Save 24% $ 106.99

This product was last offered at the strikethrough price on
05-03-2026

$ 81.44 USD
Free Shipping
Sale - Save 24%
$ 106.99

This product was last offered at the strikethrough price on
05-03-2026

$ 81.44 USD
Free Shipping

If your vehicle is experiencing cooling issues, chances are the thermostat is the cause. Common symptoms include prolonged warm-up at highway speeds from the thermostat being stuck open, or consistent overheating issues from the thermostat being stuck in the closed position. Either condition can result in poor performance, and potential damage to vital components in your vehicle.

Kit includes

  • Wahler Thermostat
  • 1 liter of Coolant

This item fits the following BMWs: 
2008-2013  E82 BMW  135i 135is 1M Coupe 
2013+  E84 BMW  X1 xDrive35i 
2011  E90 BMW  335i 335xi 335i xDrive - Sedan 
2011-2013  E92 BMW  335i 335xi 335i xDrive - Coupe 
2011-2013  E93 BMW  335i Convertible 
2011-2013  E70 BMW  X5 xDrive35i 
2011-2013  E71 BMW  X6 xDrive35i

Show More Show Less
Packaged by Turner - Corporate Logo
T#:557276
Part#: N55WTKT2
Ships on Nov 30, 2026
Sale - Save 4% $ 865.99

This product was last offered at the strikethrough price on
05-03-2026

$ 829.18 USD
Free Shipping
Sale - Save 4%
$ 865.99

This product was last offered at the strikethrough price on
05-03-2026

$ 829.18 USD
Free Shipping

The water pumps in these BMW models are known for failure near 80,000 miles is a very common issue often times leaving the owner stranded. This kit provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.

Kit includes:

  • Genuine BMW Thermostat
  • OEM VDO Electric Water Pump
  • Genuine BMW Auxiliary Water Pump
  • Genuine BMW Antifreeze/Coolant
  • OEM Mounting hardware required for both the thermostat and water pump
Show More Show Less

Packaged by Turner - Corporate Logo
T#:557261
Part#: N55WTKT
Ships on Nov 30, 2026
Sale - Save 10% $ 531.99

This product was last offered at the strikethrough price on
05-03-2026

$ 476.66 USD
Free Shipping
Sale - Save 10%
$ 531.99

This product was last offered at the strikethrough price on
05-03-2026

$ 476.66 USD
Free Shipping

The water pumps in these BMW models are known for failure near 80,000 miles is a very common issue often times leaving the owner stranded. This kit provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.

Kit includes:

  • Genuine BMW Thermostat
  • OEM Pierburg Electric Water Pump
  • Genuine BMW Antifreeze/Coolant
  • OEM Mounting hardware required for both the thermostat and water pump
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:7530036
Part#: COOLANTCAPBLUE
In Stock
$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping
VTT is proud to offer their billet replacement for the factory plastic Coolant Reservoir cap. This cap does away with the weak plastic cap while adding some pop, and color to your engine bay. This coolant cap retains ALL of the factory provisions by simply allowing you to snap the factory pressure-relief into the new Billet Cap. VTT also designed these caps to complement their N5X Billet Oil caps, N5XBillet Oil filter housing caps, and Billet Power Steering cap, so all 4 will have the same design. These caps are offered in 4 colors – Red, Black, Blue, and Clear anodized Replaces Genuine BMW Reservoir Cap # 17117639020 Note: Fitment includes 99% of all BMW with a coolant Reservoir tank from the E series forward, meaning then fit even the brand New G8X M3/4 with the S58, all B58, etc. If your BMW is an E90 or newer this cap most likely will fit
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:7530034
Part#: COOLANTCAPRED
In Stock
$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping
VTT is proud to offer their billet replacement for the factory plastic Coolant Reservoir cap. This cap does away with the weak plastic cap while adding some pop, and color to your engine bay. This coolant cap retains ALL of the factory provisions by simply allowing you to snap the factory pressure-relief into the new Billet Cap. VTT also designed these caps to complement their N5X Billet Oil caps, N5XBillet Oil filter housing caps, and Billet Power Steering cap, so all 4 will have the same design. These caps are offered in 4 colors – Red, Black, Blue, and Clear anodized Replaces Genuine BMW Reservoir Cap # 17117639020 Note: Fitment includes 99% of all BMW with a coolant Reservoir tank from the E series forward, meaning then fit even the brand New G8X M3/4 with the S58, all B58, etc. If your BMW is an E90 or newer this cap most likely will fit
Show More Show Less

OEM Bosch Auxillary Water Pump - F8X F3X F22/23 G30 B58 3.0L ...
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Bosch - Corporate Logo
T#:639203
Part#: 0392023509
In Stock
$ 89.99

This product was last offered at the strikethrough price on
02-12-2026

$ 65.99 USD
Free Shipping
$ 65.99 USD
Free Shipping
Auxillary water pumps are electric water pumps that pump coolant to critical components of your BMW. A failing pump can cause excessive noise and intermittent cooling issues, leading to potential damage if not replaced quickly enough. If the electric motor dies completely, chances are any parts downstream from the pump will overheat and fail, leading to costly repairs and replacements. Prevent this from happening by installing this brand new Auxillary Water Pump from OEM Bosch! Replaces the following BMW part numbers: 11517643949, 11517850568, 11518605322, 11518643397, 11518671654, 11518679885, 64116834917, 64116834923, 64119147359, 64119484254, 64219372723
Show More Show Less
VTT Billet Coolant Reservoir Cap - Anodized Clear - Most BMWs 2006+ (...
This coolant cap retains ALL of the factory provisions by simply allowing you to snap t...
Vargas Turbo Technologies - Corporate Logo
T#:7530035
Part#: COOLANTCAPRAW
Ships in 5 Business Days
$ 78.99 USD
Free Shipping
$ 78.99 USD
Free Shipping
VTT is proud to offer their billet replacement for the factory plastic Coolant Reservoir cap. This cap does away with the weak plastic cap while adding some pop, and color to your engine bay. This coolant cap retains ALL of the factory provisions by simply allowing you to snap the factory pressure-relief into the new Billet Cap. VTT also designed these caps to complement their N5X Billet Oil caps, N5XBillet Oil filter housing caps, and Billet Power Steering cap, so all 4 will have the same design. These caps are offered in 4 colors – Red, Black, Blue, and Clear anodized Replaces Genuine BMW Reservoir Cap # 17117639020 Note: Fitment includes 99% of all BMW with a coolant Reservoir tank from the E series forward, meaning then fit even the brand New G8X M3/4 with the S58, all B58, etc. If your BMW is an E90 or newer this cap most likely will fit
Show More Show Less

Dinan - Corporate Logo
T#:21045539
Part#: D780-0002
Ships in 5 Business Days
11% off MSRP $ 658.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 584.99 USD
Free Shipping
11% off MSRP
$ 658.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 584.99 USD
Free Shipping
The factory B4x/B58 heat exchanger is not built to cater to the rigorous demands often associated with a modified build. The thin core is easily overwhelmed with IAT's rising dramatically once pushed beyond a few successive WOT pulls or even a few minutes at the track. This elevation in temperature gives way to the factory ECU fail safes pulling timing and reducing overall power in order to keep the system from overheating to the point of permanent damage. On an application where enjoyment is directly attributed to pushing the platform to its limits this constraint to cooling presents a challenge for the automotive enthusiast. The Dinan B4x/B58 heat exchanger for the F2x/F3x chassis assists in mitigating these issues with a more robust core (48mm thick Dinan core vs. 27mm thick OEM core) that wields 78% more heat transfer surface area for improved cooling capacity. The significant increase in core thickness requires unique "L" shaped end tanks to be incorporated as well, which also contributes to the overall thermal mass (ability to absorb, store, and release heat) improvement beyond the OEM setup. With up to a 15° IAT delta recorded over stock the Dinan heat exchanger is ready, and able, to assist in extending your vehicles ability to deliver maximum performance time and time again for your driving enjoyment! Features: Average of 8° reduction in IAT's with a maximum reduction of 15° over 15 successive WOT pulls Reduces the tendency to heat soak / go in to limp mode 48mm thick Dinan cooler vs. 27mm thick stock cooler 78% more cooling surface area and volume than stock 100% TIG welded and pressure tested Installation hardware included (inclusive of xDrive specific transmission oil cooler brackets) NOTE: Due to the enlarged core and unique "L" shaped endtanks minor modification to the plastic core stack shroud may be required with some factory configurations ( particularly those with the optional OEM hot climate heat exchanger). Consult the installation PDF for full documentation on what exactly that entails. (https://documents.dinancars.com/d780-0002.pdf)
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:7530033
Part#: COOLANTCAPBLK
Back Ordered
$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping
VTT is proud to offer their billet replacement for the factory plastic Coolant Reservoir cap. This cap does away with the weak plastic cap while adding some pop, and color to your engine bay. This coolant cap retains ALL of the factory provisions by simply allowing you to snap the factory pressure-relief into the new Billet Cap. VTT also designed these caps to complement their N5X Billet Oil caps, N5XBillet Oil filter housing caps, and Billet Power Steering cap, so all 4 will have the same design. These caps are offered in 4 colors – Red, Black, Blue, and Clear anodized Replaces Genuine BMW Reservoir Cap # 17117639020 Note: Fitment includes 99% of all BMW with a coolant Reservoir tank from the E series forward, meaning then fit even the brand New G8X M3/4 with the S58, all B58, etc. If your BMW is an E90 or newer this cap most likely will fit
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:52094566
Part#: VTTFAB040BLKB58
Ships in 10 Business Days
New Item
$ 31.99 USD
Free Shipping
$ 31.99 USD
Free Shipping
Engineered for precision and durability, the VTT-FAB-040 B58 Block-Off Flange is the definitive solution for managing oil and coolant paths during fabrication.
Vargas Billet HMM Delete Kit - BMW B58TU
Fits all B58 TU / Gen 2 B58 engines
Vargas Turbo Technologies - Corporate Logo
T#:51672725
Part#: VTT-B58-COOLING-
Ships in 10 Business Days
New Item
$ 199.99 USD
Free Shipping
$ 199.99 USD
Free Shipping
The VTT Billet B58 HMM Delete is for enthusiasts who want to remove the bulky, plastic factory coolant unit in favor of a robust, motorsport-oriented setup.


Vargas Turbo Technologies - Corporate Logo
T#:51778122
Part#: VTT-B58-OIL-COOL
Ships in 10 Business Days
New Item
$ 157.99 USD
Free Shipping
$ 157.99 USD
Free Shipping
The VTT Billet B58 Remote Oil Cooler Adapter is an ideal upgrade for B58-powered platforms.
Vargas Turbo Technologies - Corporate Logo
T#:51848504
Part#: VTT-B58-CEBLUE
Ships in 10 Business Days
New Item
$ 59.99 USD
Free Shipping
$ 59.99 USD
Free Shipping
Elevate your BMW's engine bay while safeguarding your cooling system with the VTT B58 Expansion Tank Hose in Blue.
Vargas Turbo Technologies - Corporate Logo
T#:52094575
Part#: VTT-FAB-047
Ships in 10 Business Days
New Item
$ 21.99 USD
Free Shipping
$ 21.99 USD
Free Shipping
When building a custom turbo kit, the "VTT-FAB-047" Block-Off Flange is an essential component for managing your BMW's thermal systems.