Fuel Pump for BMW 3 Series F34 (2014+)

Clear BMW chassis

Please ensure your correct model is selected

BMW fuel pumps run at a very high pressure in order to properly supply the injectors with fuel. A failed pump will allow the car to crank, but wont kick over. Turner Motorsports carries Genuine BMW pumps that will have you back on the road in no time.
Sort By:

OEM Bosch High-Pressure Fuel Pump & Fuel Filter - N55 3.0L
For vehicles with a production date from 03/2014 - Also fits models up to 03/2014 with ...
Bosch - Corporate Logo
T#:568683
Part#: 13518604231
In Stock
$ 311.99 USD
Free Shipping
$ 311.99 USD
Free Shipping
This is Bosch's updated high pressure fuel pump "HPFP" for BMW's with the N55 turbo engine. This fuel pump is the OEM equivalent to BMW part number 13518604231 and supersedes BMW part number 13517610761. Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products. As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
Show More Show Less
Precision Raceworks - Corporate Logo
T#:1331988
Part#: 601-0014
In Stock
$ 499.99 USD
Free Shipping
$ 499.99 USD
Free Shipping
If you plan on upgrading your turbos or increasing power in some other way, it is important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running ethanol blends. Upgrade your BMW fuel pump with Precision Raceworks' F-Chassis High-Performance Fuel Pump Kit. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Precision Raceworks' Stage 2 bucketed fuel pump kit includes a Walbro 450 (F90000274) fuel pump, capable of supporting up to 575whp on 93 octane gas or 500whp on 100% E85. Even better yet? No wires to cut or splice, nothing to assemble, 100% OEM quality, and drop-in ready!
Show More Show Less
Precision Raceworks - Corporate Logo
T#:5216005
Part#: 601-0163
Ships in 10 Business Days
$ 899.99 USD
Free Shipping
$ 899.99 USD
Free Shipping
Upgrade your BMW fuel pump with Precision Raceworks' F-Chassis High-Performance Fuel Pump Kit for vehicles with the S55 or B58 engine. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away.
Show More Show Less

Precision Raceworks - Corporate Logo
T#:1331989
Part#: 601-0056
In Stock
$ 584.99 USD
Free Shipping
$ 584.99 USD
Free Shipping
When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running ethanol blends. Upgrade your BMW fuel pump with Precision Raceworks' F-Chassis High-Performance Fuel Pump Kit. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Precision Raceworks' Stage 2+ bucketed fuel pump kit includes a Walbro 535 (F90000285) fuel pump, capable of supporting up to 675whp on 93 octane pump gas or 600whp on 100% E85. Even better yet? No wires to cut or splice, nothing to assemble, 100% OEM quality, and drop-in ready!
Show More Show Less

Precision Raceworks - Corporate Logo
T#:38195449
Part#: 501-0043
In Stock
$ 159.99 USD
Free Shipping on orders $49 and up
Adjust your fuel pressure as needed. Thanks to the 1:1 boost reference, fuel pressure will increase as boost pressure increases, ensuring fuel delivery remains optimal under all conditions.
Fuel-It! - Corporate Logo
T#:2810078
Part#: B58PUMPHARNESS
In Stock
$ 45.00 USD
Free Shipping on orders $49 and up
Use this harness to run an improved "Supra" fuel pump in your B58 car. This harness allows you to run the G20 M340i/Supra Fuel pump (13518631642) on your F Chassis B58 car.

Precision Raceworks - Corporate Logo
T#:47164974
Part#: 201-0423
Back Ordered
$ 1,660.00 USD
Free Shipping on orders $49 and up
$ 1,660.00 USD
Free Shipping on orders $49 and up
Introducing the N55 Gauntlet High-Pressure Fuel Pump, the latest innovation from Precision Raceworks, built to outperform and provide unmatched value for N55 enthusiasts. Engineered to flow 70% more fuel than stock and 4% more than the original Big Bore, the Gauntlet sets a new standard in high-performance fuel delivery. Whether you’re looking to maximize power or prepare for future upgrades, the Gauntlet HPFP is designed to meet your needs with exceptional performance and reliability. The Gauntlet HPFP supports up to 240 bar fuel rail pressure, providing consistent fuel delivery for even the most demanding applications. Whether you’re running pump gas, E85, or any blend in between, the Gauntlet is proven through over 60,000 miles of on-road testing and dynamic testing on HPFP test benches.
Show More Show Less
Bosch - Corporate Logo
T#:33713102
Part#: 16117344066
In Stock
$ 296.99

This product was last offered at the strikethrough price on
04-20-2026

$ 216.99 USD
Free Shipping on orders $49 and up
$ 216.99 USD
Free Shipping on orders $49 and up
Replacing a faulty fuel pump with an OEM Bosch Fuel Pump ensures reliable fuel delivery and smoother engine performance. This high-quality part is built to OEM standards and designed for a perfect fit, making it an excellent choice for restoring your vehicle’s functionality. This replacement fuel pump includes a strainer filter and fuel level sensor.
Show More Show Less

Radium Engineering - Corporate Logo
T#:31059457
Part#: 20-1440
In Stock
$ 549.99 USD
Free Shipping
$ 549.99 USD
Free Shipping

Fuel-It! - Corporate Logo
T#:17106920
Part#: BMW-B58HPFP-A01
Ships on Oct 2, 2026
$ 1,499.00 USD
Free Shipping on orders $49 and up
$ 1,499.00 USD
Free Shipping on orders $49 and up
Introducing the new B58 BMW HPFP upgrade kit from Fuel-It! Replaces your factory high-pressure fuel pump with a higher capacity pump capable of supporting 30% more flow with Stage1 or 60% more flow with Stage2! Includes all required installation hardware for a clean plug and play install. Includes: Upgraded High-Pressure Fuel Pump (HPFP) Billet Adapter Plate Billet Center Alignment Tool Low-pressure Line (Triple lined crimped fittings PTFE/SS/Nylon Braided) Custom Harness and Hardware
Show More Show Less
Fuel-It! - Corporate Logo
T#:17837993
Part#: B58STG3LPFP
Back Ordered
$ 829.99 USD
Free Shipping on orders $49 and up
This is a complete Low Pressure Fuel Pump (LPFP) upgrade for those customers that need the additional capacity to meet their power goals on pump gas, race gas, or E85. It utilizes a stock pump for the primary pump so that your EKP operates as intended by the factory eliminating potential errors for current draw and the secondary pump then runs under high boost only. For power levels up to 700whp we'd recommend using the standard 450 pump and beyond 700whp we'd recommend upgrading to the 525 pump. F-Series B58 (Gen 1) Stage 3 assemblies include: New stock LPFP Secondary pump assembly Secondary wiring harness Walbro filter Walbro 450 pump (F90000274) Compatible with the following vehicle production dates: 1' F20 LCI   (05/2014 — 06/2019) 1' F21 LCI   (05/2014 — 06/2019) 2' F22   (06/2014 — 06/2017) 2' F22 LCI   (09/2016 — 12/2019) 2' F23   (06/2014 — 06/2017) 2' F23 LCI   (09/2016 — 12/2019) 3' F30 LCI   (09/2014 — 10/2018) 3' F31 LCI   (09/2014 — 06/2019) 3' F34 GT LCI   (09/2015 — 12/2019) 4' F32   (04/2015 — 02/2017) 4' F32 LCI   (05/2016 — 12/2019) 4' F33   (03/2015 — 02/2017) 4' F33 LCI   (05/2016 — 12/2019) 4' F36 Gran Coupé   (05/2014 — 03/2017) 4' F36 Gran Coupé LCI  (05/2016 — 12/2019) *Note: Secondary pump can NOT run full time. We recommend using a Hobb's switch to trigger the secondary under high boost. See the installation process here: https://www.youtube.com/watch?v=YoPf0F7PBt8
Show More Show Less
Precision Raceworks - Corporate Logo
T#:5216003
Part#: 601-0091
Ships in 9 Business Days
$ 889.99 USD
Free Shipping
$ 889.99 USD
Free Shipping
If you plan on upgrading your turbos or increasing power in some other way, it is important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running ethanol blends. Bring your fuel system up to par with Precision Raceworks' F-Chassis High-Performance Fuel Pump Kits! Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone. Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Precision Raceworks' Stage 3 bucketed fuel pump kit includes 2 Walbro 450 (F90000274) fuel pumps, capable of supporting up to 850whp on 93 octane gas or 800whp on 100% E85! Even better yet? No wires to cut or splice, nothing to assemble, 100% OEM quality, and drop-in ready. Included in the box 2 New genuine OEM fuel pump bucket assemblies (Pre-assembled with genuine Walbro 450 pump) Includes new fuel sending unit (fuel level sensor) New primary and secondary fuel filters Stage 3 Specifications: Horsepower Supported Pump Gas: ~850whp Horsepower Supported 100% E85: ~800whp Aftermarket EKP Required: No **Some European Spec vehicles may require the re-use of the top hat due to differences in emissions requirements.
Show More Show Less


Precision Raceworks - Corporate Logo
T#:38195414
Part#: 601-0198
Ships in 5 Business Days
$ 1,319.99 USD
Free Shipping on orders $49 and up
The Precision Raceworks F-SERIES (F3x/F2x) B58 HIGH PERFORMANCE FUEL PUMPS are designed for customers looking to run all blends of E85. These drop in pumps include a Walbro fuel pump capable of flowing up to 300% more fuel than the factory fuel pump and are 100% E85 compliant. Best of all, this pump ships completely assembled and ready to install. We don’t even have a core charge. Pump, Fuel filter, performance fuel lines, and sending unit included, nothing extra needed! By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Stage 4 (5.5 liters per minute) Our Stage4 bucketed/bucketless hybrid fuel pump includes all necessary wiring and pump activation switch (hobbs switch). This pump utilizes the OEM brushless pump in the bucket with a Walboro 450 (F90000274) fuel pump outside the bucket. This pump can support up to 1,000whp! (Rated for 950whp on 100% E85) and is drop in ready. No wires to cut or splice, nothing to assemble, simply drop the pump system into the tank, insert the factory pump, slide the bucketless bracket onto the side of bucket and close the top hat you are ready to go!
Show More Show Less
Spool Performance - Corporate Logo
T#:640961
Part#: SP-BM-FSP-S2
Special Order: No Guaranteed ETA
$ 499.99 USD
Free Shipping
$ 499.99 USD
Free Shipping
Stage 2 LPFP upgrade kit for your N55 engine
Precision Raceworks - Corporate Logo
T#:19858319
Part#: 601-0199
Ships in 9 Business Days
$ 1,399.99 USD
Free Shipping on orders $49 and up
The Precision Raceworks F-SERIES (F3x/F2x) B58 HIGH-PERFORMANCE FUEL PUMPS are designed for customers looking to run all blends of E85. These drop in pumps include a Walbro fuel pump capable of flowing up to 300% more fuel than the factory fuel pump and are 100% E85 compliant. Best of all, this pump ships completely assembled and ready to install. We don’t even have a core charge. Pump, Fuel filter, performance fuel lines, and sending unit included, nothing extra needed! By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Stage 4.5 (6 literes per minute) Our Stage4 bucketed/bucketless hybrid fuel pump includes all necessary wiring and pump activation switch (hobbs switch). This pump utilizes the OEM brushless pump in the bucket and a second Walbro 525 (F90000285) fuel pump outside the bucket. This pump can support OVER 1,000whp! (Rated for 1000+whp on 100% E85) and is drop in ready. No wires to cut or splice, nothing to assemble, simply drop the pump system into the tank, insert the factory pump, Slide the bucketless bracket onto side of bucket and close the top hat you are ready to go! Included in the box Genuine OEM fuel pump bucket assembly Pre-assembled with OEM Brushless and mounted Walboro 450 Includes fuel sending unit (fuel level sensor) Upgraded AN-6 fuel feed lines with fuel pressure regulator and return lines<> New In-Line Fuel Filter Plug and play boost reference harness (zero cutting, stripping, crimping) 13psi boost reference switch (hobbs switch) This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. Stage 4.5 Pump flow 72psi (5bar): 6 LPM Horsepower Supported Pump Gas: 1,000+ Horsepower Supported 100% E85: 1,000+ Aftermarket EKP Required: No
Show More Show Less

Spool Performance - Corporate Logo
T#:640940
Part#: SP-BMB58-FP-DY
Special Order: No Guaranteed ETA
$ 499.00 USD
Free Shipping
$ 499.00 USD
Free Shipping
LPFP upgrade kit for your B58 engine - Save by assembling on your own!

Spool Performance - Corporate Logo
T#:640951
Part#: SP-BMFXXN-FP
Special Order: No Guaranteed ETA
$ 749.00 USD
Free Shipping
$ 749.00 USD
Free Shipping
Stage 3 LPFP upgrade kit for your N55 engine
Spool Performance - Corporate Logo
T#:31291063
Part#: SP-B58-FX350-NEY
Special Order: No Guaranteed ETA
$ 2,348.00 USD
Free Shipping on orders $49 and up
The FX-350 is truly Plug and Play for all platforms we are offering and comes with all the lines and hardware needed for a clean easy install.

Hitachi - Corporate Logo
T#:589968
Part#: 11327601233
Back Ordered
$ 55.00 USD
Free Shipping on orders $49 and up
$ 55.00 USD
Free Shipping on orders $49 and up
A faulty camshaft follower can damage the engine and cause incorrect valve timing.
Fuel-It! - Corporate Logo
T#:403295
Part#: FILPFPK5
Back Ordered
Sale - Save 2% $ 649.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 634.84 USD
Free Shipping
Sale - Save 2%
$ 649.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 634.84 USD
Free Shipping
This is a complete Low Pressure Fuel Pump (LPFP) upgrade that replaces your weak stock LPFP assembly with a high-flow E85-certified one. Standard Kit Includes: A brand new OEM LPFP bucket that is upgraded with a new Walbro 450 or 525 pump and filter. A new E85 compatible Walbro 450 pump (F90000274) that flows 50% more fuel than stock Optional A new E85 compatible Walbro 525 pump (F90000285) that flows 65% more fuel than stock NOTE: Owners with I-Drive may get a Fuel pump warning on the screen that says "Continued driving is possible. Have the system checked by your BMW center as soon as possible." As long as the car is running fine and does not exhibit any other symptoms, there is not an issue with the pump and this can be ignored. If you have any questions about this please feel free to contact us. Upgraded pumps pull more current, so if your EKP (LPFP control module) is weak, it may overheat causing it to shut down and need to be replaced. If this is a concern for you check out our Stage 3 fuel pump upgrade kits that retain the stock LPFP and add a secondary pump.
Show More Show Less

Spool Performance - Corporate Logo
T#:26271786
Part#: SP-FX-200-N55-NE
In Stock
$ 1,799.00 USD
Free Shipping on orders $49 and up
The FX-200 is an advanced high-pressure fuel pump engineered specifically for the BMW N55 engine, replacing our previous FX180 model. Featuring a larger bore size than the stock pump, it provides nearly double the flow rate. This pump is fully E85 fuel compatible and integrates seamlessly into the system without requiring any wire cutting or splicing. The enhanced flow capacity enables the use of higher ethanol concentrations and supports sufficient fueling for larger turbochargers.
Show More Show Less

Dorch Engineering - Corporate Logo
T#:55533509
Part#: DE-581-30A
In Stock
New Item
$ 2,399.00 USD
Free Shipping on orders $49 and up
The Dorch Engineering DS3 B58 Gen 1 HPFP Upgrade is the ultimate solution for drivers looking to lift the fueling restrictions on their B58 powerplant. Optimized for high-output setups, this upgraded pump ensures your injectors are supplied with the precise volume
Show More Show Less
Dorch Engineering - Corporate Logo
T#:55461363
Part#: DE-581-25A
In Stock
New Item
$ 1,799.00 USD
Free Shipping on orders $49 and up
The Dorch Engineering DS25 HPFP Upgrade for the Gen 1 B58 engine is the definitive hardware upgrade for enthusiasts looking to safely extract maximum performance from their powerplants. Designed to eliminate the primary bottleneck in the B58 fueling system
Show More Show Less
Dorch Engineering - Corporate Logo
T#:55533499
Part#: DE-55-25A
Ships in 1 Business Day
New Item
$ 1,699.00 USD
Free Shipping on orders $49 and up
$ 1,699.00 USD
Free Shipping on orders $49 and up
The Dorch Engineering DS25 N55 HPFP Upgrade is the definitive solution for enthusiast drivers looking to extract maximum power from their N55. Optimized for high output setups, this upgraded pump delivers a critical 25% bump in fueling capacity over the factory unit
Show More Show Less


Dorch Engineering - Corporate Logo
T#:55569526
Part#: DE-LK-1038-PWGKT
Ships in 4 Business Days
New Item
$ 1,799.00 USD
$ 1,799.00 USD
The factory N55 fueling system leaves a lot to be desired once you turn up the boost. Enter the Dorch Engineering HPFP Lift Kit. This kit is a calculated, high performance solution designed specifically for PWG N55 engines to extract maximum flow from your fueling setup by altering the mechanical lift profile of the pump drive
Show More Show Less
Dorch Engineering - Corporate Logo
T#:55569525
Part#: DE-LK-1049-PWGKT
Ships in 4 Business Days
New Item
$ 1,799.00 USD
$ 1,799.00 USD
The Dorch Engineering N55 PWG Lift Kit is the upgrade your BMW needs. By optimizing the fuel pump lift profile, this kit allows your HPFP to pump significantly more fuel per revolution. Designed specifically for the early Pneumatic Wastegate (PWG) N55 engines
Show More Show Less
Dorch Engineering - Corporate Logo
T#:55569519
Part#: DE-LK-1038-EWGKT
Ships in 4 Business Days
New Item
$ 1,799.00 USD
$ 1,799.00 USD
The Dorch Engineering Lift Kit HPFP Upgrade is engineered to completely eradicate direct-injection fueling limitations, providing up to 38% more flow volume on top of your existing Dorch fuel pump setup.
Show More Show Less

Hitachi - Corporate Logo
T#:48850079
Part#: 16117243975
Ships in 6 Business Days
$ 344.99 USD
Free Shipping on orders $49 and up
Delivers fuel from the tank to the engine.

Fuel-It! - Corporate Logo
T#:13003684
Part#: BMWB58HPFPSTG2
Ships on Oct 2, 2026
$ 1,499.00 USD
Free Shipping on orders $49 and up
Introducing the new B58 BMW HPFP upgrade kit from Fuel-It! Replaces your factory high-pressure fuel pump with a higher capacity pump capable of supporting 30% more flow with Stage1 or 60% more flow with Stage2! Includes all required installation hardware for a clean plug and play install. Includes: Upgraded High-Pressure Fuel Pump (HPFP) Billet Adapter Plate Billet Center Alignment Tool Low-pressure Line (Triple lined crimped fittings PTFE/SS/Nylon Braided) Custom Harness and Hardware
Show More Show Less
Dorch Engineering - Corporate Logo
T#:55569521
Part#: DE-LK-1049-EWGKT
Ships in 4 Business Days
New Item
$ 1,799.00 USD
$ 1,799.00 USD
Engineered specifically for high power builds that push the direct injection threshold, this lift kit overrides the typical N55 fueling bottleneck by overdriving the high pressure fuel pump mechanism.

Precision Raceworks - Corporate Logo
T#:38195444
Part#: 601-0124
Ships in 9 Business Days
$ 1,059.99 USD
Free Shipping on orders $49 and up
The Precision Raceworks F-Series High Performance Fuel Pumps are designed for customers looking to run all blends of E85. These drop-in pumps include a Walbro fuel pump capable of flowing up to 300% more fuel than the factory fuel pump and is 100% E85 compliant. Best of all this pump ships completely assembled and ready to install, no core charge! New pump, new fuel filter, and new sending unit included! By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Our Stage 3.75 bucketed/bucketless hybrid fuel pump includes all necessary wiring and pump activation switch (hobbs switch). This pump boasts a single primary Walbro 535 (F90000295) fuel pump in the bucket and a second Walbro 525 (F90000285) fuel pump outside the bucket. This pump can support OVER 1,000whp! (Rated for 950whp on 100% E85) and is drop-in ready. No wires to cut or splice, and nothing to assemble, simply drop the bucketless system into the tank, insert the factory pump, mount the bucketless to the side of the bucket and close the top hat - you are ready to go!
Show More Show Less
Precision Raceworks - Corporate Logo
T#:38195443
Part#: 601-0123
Ships in 9 Business Days
$ 984.99 USD
Free Shipping on orders $49 and up
The Precision Raceworks F-Series High Performance Fuel Pumps are designed for customers looking to run all blends of E85. These drop-in pumps include a Walbro fuel pump capable of flowing up to 300% more fuel than the factory fuel pump and is 100% E85 compliant. Best of all this pump ships completely assembled and ready to install, no core charge! New pump, new fuel filter, and new sending unit included! By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Our Stage 3 .5 bucketed/bucketless hybrid fuel pump includes all necessary wiring and pump activation switch (hobbs switch). This pump boasts a single primary Walbro 450 (F90000274) fuel pump in the bucket and a second Walbro 525 (F90000285) fuel pump outside the bucket. This pump can support 950whp (Rated for 875whp on 100% E85) and is drop-in ready. No wires to cut or splice, and nothing to assemble, simply drop the bucketless system into the tank, insert the factory pump, mount the bucketless to the side of the bucket, and close the top hat - you are ready to go!
Show More Show Less

Precision Raceworks - Corporate Logo
T#:47679264
Part#: 201-0444
Special Order: No Guaranteed ETA
$ 1,815.00 USD
Free Shipping on orders $49 and up
$ 1,815.00 USD
Free Shipping on orders $49 and up
Precision Raceworks is proud to present the Gauntlet High Pressure Fuel Pump for the B58 Gen 1 engine. This cutting-edge pump flows 70% more fuel than the stock pump and offers an additional 4% over our original Big Bore HPFP. Designed for enthusiasts who demand the best, the Gauntlet delivers top-tier performance at a competitive price, making it the best value on the market for high-performance B58 fuel systems.
Show More Show Less

Spool Performance - Corporate Logo
T#:20320741
Part#: SP-BMB58-FP
Special Order: No Guaranteed ETA
$ 1,148.99 USD
Free Shipping on orders $49 and up
Spool Performance - Corporate Logo
T#:15976515
Part#: SP-FX-180-B58
Special Order: No Guaranteed ETA
$ 1,899.00 USD
Free Shipping on orders $49 and up
NOTE: This kit includes the optional Stainless Steel High Pressure Fuel Line offered by Spool The FX-180 is an upgraded high-pressure fuel pump for the BMW B58 motor. The pump features a bigger bore size than stock that translates into roughly 80% more flow when compared to stock. The pump is completely E85 compatible and fully plug and play with no cutting or splicing of any kind required. The added flow will let you run much higher ethanol concentrations and also allow fueling for bigger turbos. Flow Rates based on B58 stock CAM lift: Stock B58 Pump - 0.954 cc per rev FX-180 - 1.7 cc per rev Why do you need it? The stock HPFP on B58 motor is severely limited in capacity when trying to tune and raise the output of the motor. The FX-180 adds 80% more flow to the equation, raising the fueling limits on the platform and helping you run bigger turbos and/or higher ethanol concentration blends. Are tune changes required? The upgraded pump does require calibration changes. It is important to apply these changes prior to starting the car with pump installed to avoid any possible damage and void of warranty. Spool Performance can provide calibration details to your existing tuner and/or help you connect with established tuners who are experienced with these pumps. Custom tuning is required to get maximum output out of the upgraded pump setup for your specific vehicle setup and ambient conditions. Spool Performance is a hardware manufacturer and does not provide custom tunes, but can assist with questions your tuner may have. Low Pressure Fuel Pump Upgrade: Proper low pressure fueling is extremely important for proper functioning and durability of the high pressure pumps and injectors in a DI system. Inadequate low pressure fueling can cause damage to the pump piston and bore as they are lubricated by controlled leakage of fuel. Resulting damage from low pressure starvation is detectable and would be cause for voided warranties. Please make sure you plan out your fuel system build with proper low pressure upgrades when necessary. NOTE: NOT COMPATIBLE WITH B58TU ENGINE
Show More Show Less
Spool Performance - Corporate Logo
T#:640931
Part#: SP-FX-150-B58
Special Order: No Guaranteed ETA
$ 1,399.00 USD
Free Shipping
$ 1,399.00 USD
Free Shipping

B58 High-Pressure Fuel-pump | Spool Performance delivers exceptional performance for BMW enthusiasts seeking to upgrade their vehicle’s fuel system. Designed by the innovative engineers at Spool Performance, this high-pressure fuel pump significantly enhances fuel flow and power, making it an ideal choice for those looking to push the limits of their BMW's performance.

  • Increased Flow Rate: Provides 50% more flow compared to stock pumps (Stock @ .954 cc per rev vs. FX-150 @ 1.43 cc per rev).
  • Enhanced Fuel Limits: Supports larger turbos and higher ethanol concentration blends for increased performance.
  • Easy Installation: Plug-and-play design for straightforward installation.
  • E85 Compatibility: Suitable for use with E85 fuel blends.
  • Lifetime Warranty: Backed by a lifetime warranty from Spool Performance.

Important Note: The upgraded pump requires calibration changes before installation to prevent damage and warranty voidance. Ensure these changes are applied prior to starting the vehicle with the new pump installed.

Show More Show Less


Spool Performance - Corporate Logo
T#:37385971
Part#: SP-FX-200-N20-NE
Special Order: No Guaranteed ETA
$ 1,799.00 USD
Free Shipping on orders $49 and up