BMW fuel pumps run at a very high pressure in order to properly supply the injectors with fuel. A failed pump will allow the car to crank, but wont kick over. Turner Motorsports carries Genuine BMW pumps that will have you back on the road in no time.
Adjust your fuel pressure as needed. Thanks to the 1:1 boost reference, fuel pressure will increase as boost pressure increases, ensuring fuel delivery remains optimal under all conditions.
Use this harness to run an improved "Supra" fuel pump in your B58 car. This harness allows you to run the G20 M340i/Supra Fuel pump (13518631642) on your F Chassis B58 car.
Introducing the N55 Gauntlet High-Pressure Fuel Pump, the latest innovation from Precision Raceworks, built to outperform and provide unmatched value for N55 enthusiasts. Engineered to flow 70% more fuel than stock and 4% more than the original Big Bore, the Gauntlet sets a new standard in high-performance fuel delivery. Whether you’re looking to maximize power or prepare for future upgrades, the Gauntlet HPFP is designed to meet your needs with exceptional performance and reliability. The Gauntlet HPFP supports up to 240 bar fuel rail pressure, providing consistent fuel delivery for even the most demanding applications. Whether you’re running pump gas, E85, or any blend in between, the Gauntlet is proven through over 60,000 miles of on-road testing and dynamic testing on HPFP test benches.
Show More Show Less
Introducing the new B58 BMW HPFP upgrade kit from Fuel-It! Replaces your factory high-pressure fuel pump with a higher capacity pump capable of supporting 30% more flow with Stage1 or 60% more flow with Stage2! Includes all required installation hardware for a clean plug and play install. Includes: Upgraded High-Pressure Fuel Pump (HPFP) Billet Adapter Plate Billet Center Alignment Tool Low-pressure Line (Triple lined crimped fittings PTFE/SS/Nylon Braided) Custom Harness and Hardware
Show More Show Less
This is a complete Low Pressure Fuel Pump (LPFP) upgrade for those customers that need the additional capacity to meet their power goals on pump gas, race gas, or E85. It utilizes a stock pump for the primary pump so that your EKP operates as intended by the factory eliminating potential errors for current draw and the secondary pump then runs under high boost only. For power levels up to 700whp we'd recommend using the standard 450 pump and beyond 700whp we'd recommend upgrading to the 525 pump. F-Series B58 (Gen 1) Stage 3 assemblies include: New stock LPFP Secondary pump assembly Secondary wiring harness Walbro filter Walbro 450 pump (F90000274) Compatible with the following vehicle production dates: 1' F20 LCI (05/2014 — 06/2019) 1' F21 LCI (05/2014 — 06/2019) 2' F22 (06/2014 — 06/2017) 2' F22 LCI (09/2016 — 12/2019) 2' F23 (06/2014 — 06/2017) 2' F23 LCI (09/2016 — 12/2019) 3' F30 LCI (09/2014 — 10/2018) 3' F31 LCI (09/2014 — 06/2019) 3' F34 GT LCI (09/2015 — 12/2019) 4' F32 (04/2015 — 02/2017) 4' F32 LCI (05/2016 — 12/2019) 4' F33 (03/2015 — 02/2017) 4' F33 LCI (05/2016 — 12/2019) 4' F36 Gran Coupé (05/2014 — 03/2017) 4' F36 Gran Coupé LCI (05/2016 — 12/2019) *Note: Secondary pump can NOT run full time. We recommend using a Hobb's switch to trigger the secondary under high boost. See the installation process here: https://www.youtube.com/watch?v=YoPf0F7PBt8
Show More Show Less
The Precision Raceworks F-SERIES (F3x/F2x) B58 HIGH PERFORMANCE FUEL PUMPS are designed for customers looking to run all blends of E85. These drop in pumps include a Walbro fuel pump capable of flowing up to 300% more fuel than the factory fuel pump and are 100% E85 compliant. Best of all, this pump ships completely assembled and ready to install. We don’t even have a core charge. Pump, Fuel filter, performance fuel lines, and sending unit included, nothing extra needed! By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Stage 4 (5.5 liters per minute) Our Stage4 bucketed/bucketless hybrid fuel pump includes all necessary wiring and pump activation switch (hobbs switch). This pump utilizes the OEM brushless pump in the bucket with a Walboro 450 (F90000274) fuel pump outside the bucket. This pump can support up to 1,000whp! (Rated for 950whp on 100% E85) and is drop in ready. No wires to cut or splice, nothing to assemble, simply drop the pump system into the tank, insert the factory pump, slide the bucketless bracket onto the side of bucket and close the top hat you are ready to go!
Show More Show Less
The Precision Raceworks F-SERIES (F3x/F2x) B58 HIGH-PERFORMANCE FUEL PUMPS are designed for customers looking to run all blends of E85. These drop in pumps include a Walbro fuel pump capable of flowing up to 300% more fuel than the factory fuel pump and are 100% E85 compliant. Best of all, this pump ships completely assembled and ready to install. We don’t even have a core charge. Pump, Fuel filter, performance fuel lines, and sending unit included, nothing extra needed! By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Stage 4.5 (6 literes per minute) Our Stage4 bucketed/bucketless hybrid fuel pump includes all necessary wiring and pump activation switch (hobbs switch). This pump utilizes the OEM brushless pump in the bucket and a second Walbro 525 (F90000285) fuel pump outside the bucket. This pump can support OVER 1,000whp! (Rated for 1000+whp on 100% E85) and is drop in ready. No wires to cut or splice, nothing to assemble, simply drop the pump system into the tank, insert the factory pump, Slide the bucketless bracket onto side of bucket and close the top hat you are ready to go! Included in the box Genuine OEM fuel pump bucket assembly Pre-assembled with OEM Brushless and mounted Walboro 450 Includes fuel sending unit (fuel level sensor) Upgraded AN-6 fuel feed lines with fuel pressure regulator and return lines<> New In-Line Fuel Filter Plug and play boost reference harness (zero cutting, stripping, crimping) 13psi boost reference switch (hobbs switch) This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. Stage 4.5 Pump flow 72psi (5bar): 6 LPM Horsepower Supported Pump Gas: 1,000+ Horsepower Supported 100% E85: 1,000+ Aftermarket EKP Required: No
Show More Show Less
Introducing the new B58 BMW HPFP upgrade kit from Fuel-It! Replaces your factory high-pressure fuel pump with a higher capacity pump capable of supporting 30% more flow with Stage1 or 60% more flow with Stage2! Includes all required installation hardware for a clean plug and play install. Includes: Upgraded High-Pressure Fuel Pump (HPFP) Billet Adapter Plate Billet Center Alignment Tool Low-pressure Line (Triple lined crimped fittings PTFE/SS/Nylon Braided) Custom Harness and Hardware
Show More Show Less
The Precision Raceworks F-Series High Performance Fuel Pumps are designed for customers looking to run all blends of E85. These drop-in pumps include a Walbro fuel pump capable of flowing up to 300% more fuel than the factory fuel pump and is 100% E85 compliant. Best of all this pump ships completely assembled and ready to install, no core charge! New pump, new fuel filter, and new sending unit included! By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Our Stage 3 .5 bucketed/bucketless hybrid fuel pump includes all necessary wiring and pump activation switch (hobbs switch). This pump boasts a single primary Walbro 450 (F90000274) fuel pump in the bucket and a second Walbro 525 (F90000285) fuel pump outside the bucket. This pump can support 950whp (Rated for 875whp on 100% E85) and is drop-in ready. No wires to cut or splice, and nothing to assemble, simply drop the bucketless system into the tank, insert the factory pump, mount the bucketless to the side of the bucket, and close the top hat - you are ready to go!
Show More Show Less
The Precision Raceworks F-Series High Performance Fuel Pumps are designed for customers looking to run all blends of E85. These drop-in pumps include a Walbro fuel pump capable of flowing up to 300% more fuel than the factory fuel pump and is 100% E85 compliant. Best of all this pump ships completely assembled and ready to install, no core charge! New pump, new fuel filter, and new sending unit included! By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Our Stage 3.75 bucketed/bucketless hybrid fuel pump includes all necessary wiring and pump activation switch (hobbs switch). This pump boasts a single primary Walbro 535 (F90000295) fuel pump in the bucket and a second Walbro 525 (F90000285) fuel pump outside the bucket. This pump can support OVER 1,000whp! (Rated for 950whp on 100% E85) and is drop-in ready. No wires to cut or splice, and nothing to assemble, simply drop the bucketless system into the tank, insert the factory pump, mount the bucketless to the side of the bucket and close the top hat - you are ready to go!
Show More Show Less
Precision Raceworks is proud to present the Gauntlet High Pressure Fuel Pump for the B58 Gen 1 engine. This cutting-edge pump flows 70% more fuel than the stock pump and offers an additional 4% over our original Big Bore HPFP. Designed for enthusiasts who demand the best, the Gauntlet delivers top-tier performance at a competitive price, making it the best value on the market for high-performance B58 fuel systems.
Show More Show Less
