Precision Raceworks for BMW 3 Series F34 (2014+)

Precision Raceworks N54/N55 Fuel Injector Tool - BMW N54 N55 3.0L ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1316809

Part#: 601-0005

In Stock

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

Precision Raceworks' Fuel Injector Removal and Installation Tool is one of the highest-rated tools on the market, not only for removal and installation of injectors but also for the installation and compression of the high-pressure seals! For injector removal, simply thread the tool onto the input of the fuel injector and use the slide hammer to tap the injector out. When installing new seals, simply use needle-nose pliers to pinch the old seal and remove it. Once removed, the new seal can be installed using the included expansion tool found stored inside the shaft of the tool. The rest is as easy as 1, 2, 3! Insert the injector into die #1 and count to 10, then insert the injector into die #2 and count to 20, finally insert the injector into die #3 and count to 30, then install your injector.

Show More Show Less

Precision Raceworks Replacement Spark Plug Wires - For 601-0021-1 (fo...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3786918

Part#: 201-0002

In Stock

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

From supplemental fueling to ignition systems and anywhere in between Precision Raceworks, LLC is known for being the premium product manufacture in the market. Precision Raceworks' BMW N55 replacement spark plug wires are the same plug wires that are included in their High-Performance N55 Ignition Kit. These wires are 100% custom design from the ground up by Precision Raceworks, the only company in the world to produce plug wires with boots specific for your N55 BMW to ensure proper fitment and quality. Plug wires are sold in packs of 6 so you get all new plug wires every time. So, replace the one you need and keep the rest for spares or replace all 6. All components used meet or exceed OEM requirements and feature seals that are both dust and water-resistant. Specifications: Weight: 1.8lbs Plug Wire Resistance: 50ohms per-ft Carbon Core: Yes Spiral Core Wire: Yes Silicone Insulation: 8mm High Performance Fiberglass inlayed for strength: Yes

Show More Show Less

Precision Raceworks High Performance Fuel Pump Kit - Stage 2 - BMW F-...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1331988

Part#: 601-0014

In Stock

$ 499.99 USD

Add to Wish List

Qty

$ 499.99 USD

Add to Wish List

If you plan on upgrading your turbos or increasing power in some other way, it is important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running ethanol blends. Upgrade your BMW fuel pump with Precision Raceworks' F-Chassis High-Performance Fuel Pump Kit. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Precision Raceworks' Stage 2 bucketed fuel pump kit includes a Walbro 450 (F90000274) fuel pump, capable of supporting up to 575whp on 93 octane gas or 500whp on 100% E85. Even better yet? No wires to cut or splice, nothing to assemble, 100% OEM quality, and drop-in ready!

Show More Show Less

Precision Raceworks Phenolic Spacer - BMP Manifold 1/2" - N54/N5...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5229488

Part#: 501-0081

In Stock

$ 149.99 USD

Add to Wish List

Qty

$ 149.99 USD

Add to Wish List

The Precision Raceworks Phenolic Spacer is made in the USA from premium fiber impregnated phenolic material. With a Rockwell Hardness of 100 and a conductivity rating of 2.03 it is the perfect material for insulating between heat generating parts such as the cylinder head and other parts you wish to stay cool like the intake manifold. A phenolic spacer works by reducing heat transfer from the cylinder head to the manifold which results in reduction of intake air temperature, allowing for cooler air to enter the cylinders which is more dense and reduces chance of detonation in the cylinder. Our 1/2" phenolic spacer not only provides a thermal insulation between the cylinder head and intake plenum. It has also been designed to make use of factory O-Rings rather than messy gasket maker adhesive to ensure an air tight seal each and every time along with easy installation and removal.

Show More Show Less

Precision Raceworks High Performance Fuel Pump Kit - Stage 2.5 V2 - B...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1331989

Part#: 601-0056

In Stock

$ 584.99 USD

Add to Wish List

Qty

$ 584.99 USD

Add to Wish List

When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running ethanol blends. Upgrade your BMW fuel pump with Precision Raceworks' F-Chassis High-Performance Fuel Pump Kit. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Precision Raceworks' Stage 2+ bucketed fuel pump kit includes a Walbro 535 (F90000285) fuel pump, capable of supporting up to 675whp on 93 octane pump gas or 600whp on 100% E85. Even better yet? No wires to cut or splice, nothing to assemble, 100% OEM quality, and drop-in ready!

Show More Show Less

BMW N20 High Performance Ignition Kit - Blue Coils

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1271578

Part#: 601-0159

In Stock

$ 457.99

This product was last offered at the strikethrough price on
01-22-2026

$ 449.99 USD

Add to Wish List

Qty

$ 449.99 USD

Add to Wish List

The Precision Raceworks BMW N20 / N26 HIGH PERFORMANCE IGNITION KIT is designed to integrate with any vehicle equipped with the N20/N26 engine. This is the highest output ignition system ever developed for the N2X community Featuring 100% plug and play connections and low resistance 50ohm/ft proprietary plug wires. High voltage & High Current coil design using technology from Marine & Aerospace applications. While coils do not increase horsepower unless the coil they are replacing are not doing their job the factory coils are lacking in proper output so much that all cars tested (stock or heavily modified) gain 20+ whp and 20+ wtq!

Show More Show Less

Precision Raceworks High Performance Fuel Pump Kit - Stage 3 - BMW F-...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5216020

Part#: 601-0163-B58

In Stock

$ 899.99 USD

Add to Wish List

Qty

$ 899.99 USD

Add to Wish List

If you are looking to get more power out of your BMW, it's important not to forget your fueling system! Your low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially true when running ethanol blends. Bring your fuel system up to par with Precision Raceworks' F-Chassis B58 High-Performance Fuel Pump Kits! Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone. Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Precision Raceworks' Stage 3 bucketed fuel pump kit includes a Walbro 450 (F90000274) fuel pump, capable of supporting up to 900whp on 93 octane gas or 850whp on 100% E85! Even better yet? No wires to cut or splice, nothing to assemble, 100% OEM quality, and drop-in ready. Included in the box New genuine OEM fuel pump bucket assembly (Pre-assembled with genuine Walbro 450 pump) Includes new fuel sending unit (fuel level sensor) New primary and secondary fuel filters Stage 2 Specifications: Horsepower Supported Pump Gas: ~900whp Horsepower Supported 100% E85: ~850whp Aftermarket EKP Required: No **Some European Spec vehicles may require the re-use of the top hat due to differences in emissions requirements.

Show More Show Less

Black Market Parts Multi-Port Injection Kit - 750cc - BMW N54/N55 3.0...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1316810

Part#: 601-0015

In Stock

$ 699.99 USD

Add to Wish List

Qty

$ 699.99 USD

Add to Wish List

If you plan on upgrading your turbos or increasing power in some other way, you will also want to consider upgrading your fueling capability as well! Using stock BMW injectors, you will likely top out at around 550rwhp on 93 Octane with water/methanol injection (or less if running an ethanol blend). At the end of the day, the stock injectors just are not enough. Introducing Black Market Parts (by Precision Raceworks) Multi-Port Injection Kit with flex-fuel compatibility! This kit allows you to safely and sufficiently support greater power levels with supplemental fueling without straining your stock fuel system. This kit integrates seamlessly into your car as if it were installed at the factory; you can’t even see the kit once the car is assembled! This kit includes everything needed to add multi-port injection and is 100% e85 compliant. Precision Raceworks includes new Genuine Bosch injectors which are flow matched both static and dynamic by an outside lab to industry-leading requirements. A Detailed certificate of conformance and genuine Bosch product certificate is included with each kit, giving you all flow data needed for optimal tuning. Don’t be tricked into thinking all port injection kits are equal, the BMP kit is the industry leader. This kit features 750cc* injectors standard (this flow rate is based on industry-standard injector flow test pressure of 43.5psi), and at 72psi these injectors flow over 1000cc. This means Precision's BMP Port Injection Kit is capable of supporting builds from 400whp up to 1,000whp and anywhere in between! Simply pick up this kit and pair it with your favorite injector controller and you are ready to go!

Show More Show Less

Precision Raceworks High Performance Fuel Pump Kit - Stage 3 - BMW F-...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5216003

Part#: 601-0091

Ships in 6 Business Days

$ 889.99 USD

Add to Wish List

Qty

$ 889.99 USD

Add to Wish List

If you plan on upgrading your turbos or increasing power in some other way, it is important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running ethanol blends. Bring your fuel system up to par with Precision Raceworks' F-Chassis High-Performance Fuel Pump Kits! Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone. Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Precision Raceworks' Stage 3 bucketed fuel pump kit includes 2 Walbro 450 (F90000274) fuel pumps, capable of supporting up to 850whp on 93 octane gas or 800whp on 100% E85! Even better yet? No wires to cut or splice, nothing to assemble, 100% OEM quality, and drop-in ready. Included in the box 2 New genuine OEM fuel pump bucket assemblies (Pre-assembled with genuine Walbro 450 pump) Includes new fuel sending unit (fuel level sensor) New primary and secondary fuel filters Stage 3 Specifications: Horsepower Supported Pump Gas: ~850whp Horsepower Supported 100% E85: ~800whp Aftermarket EKP Required: No **Some European Spec vehicles may require the re-use of the top hat due to differences in emissions requirements.

Show More Show Less

Precision Raceworks Multi-Port Injection Kit - 750cc - BMW B58 3.0L ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1316816

Part#: 601-0175

Ships in 10 Business Days

$ 1,199.99 USD

Add to Wish List

Qty

$ 1,199.99 USD

Add to Wish List

If you plan on upgrading your turbos or increasing power in some other way, you will also want to consider upgrading your fueling capability as well! Using stock BMW injectors, you will likely top out at around 600rwhp on 93 Octane with water/methanol injection and a tune (or less if running an ethanol blend). At the end of the day, the stock injectors just are not enough. Introducing Precision Raceworks' Multiport Injection Kit with flex-fuel compatibility! This kit allows you to safely and sufficiently support greater power levels with supplemental fueling without straining your stock fuel system. This kit integrates seamlessly into your car as if it were installed at the factory; you can’t even see the kit once the car is assembled! This kit includes everything needed to add multi-port injection and is 100% e85 compliant. Precision Raceworks includes new Genuine Bosch injectors which are flow matched both static and dynamic by an outside lab to industry-leading requirements. A Detailed certificate of conformance and genuine Bosch product certificate is included with each kit, giving you all flow data needed for optimal tuning. Don’t be tricked into thinking all port injection kits are equal, the Precision Raceworks kit is the industry leader and only plate style kit featuring even fuel distribution across all 6 cylinders. This kit features 750cc* injectors standard (this flow rate is based on industry-standard injector flow test pressure of 43.5psi), and at 72psi these injectors flow over 1000cc. This means Precision's Port Injection Kit is capable of supporting builds from 400whp up to 1,000whp and anywhere in between!

Show More Show Less

Black Market Parts Multi-Port Injection Kit - 330cc - BMW N20/N26 2.0...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5229453

Part#: 601-0166

Ships in 10 Business Days

$ 689.99 USD

Add to Wish List

Qty

$ 689.99 USD

Add to Wish List

If you plan on upgrading your turbos or increasing power in some other way, you will also want to consider upgrading your fueling capability as well! The Black Market Parts Multi-port Injection (MPI) kit with flex fuel capability is a necessity to safely and sufficiently support the power levels of upgraded turbos. This kit is capable of supporting all BMW’s with N20 & N26 engines with supplemental fueling. This kit integrates seamlessly into your car like it left from the factory with it installed; you can’t even see the kit once the car is assembled! This kit includes everything needed to add multi-port injection and is 100% e85 compliant. We include new genuine Bosch Motorsport injectors. This kit features 330cc* injectors standard (this flow rate is based on industry injector flow test pressure of 43.5psi). Additionally, we offer a further upgrade to 750cc* injectors! These are the same ones found in our N54/N55/S55 port injection kit and will provide all the supplemental fuel even your largest HP N20 & N26 motors can handle. Simply pick up this kit and pair it with your favorite injector controller and you are ready to go!

Show More Show Less

Project Cars

SELECT YOUR BMW

Precision Raceworks for BMW 3 Series F34 (2014+)

Sub-Categories

Precision Raceworks N54/N55 Fuel Injector Tool - BMW N54 N55 3.0L ...

Precision Raceworks Replacement Spark Plug Wires - For 601-0021-1 (fo...

Precision Raceworks High Performance Fuel Pump Kit - Stage 2 - BMW F-...

Precision Raceworks Phenolic Spacer - BMP Manifold 1/2" - N54/N5...

Precision Raceworks High Performance Fuel Pump Kit - Stage 2.5 V2 - B...

BMW N20 High Performance Ignition Kit - Blue Coils

Precision Raceworks High Performance Fuel Pump Kit - Stage 3 - BMW F-...

Black Market Parts Multi-Port Injection Kit - 750cc - BMW N54/N55 3.0...

Precision Raceworks High Performance Fuel Pump Kit - Stage 3 - BMW F-...

Precision Raceworks Multi-Port Injection Kit - 750cc - BMW B58 3.0L ...

Black Market Parts Multi-Port Injection Kit - 330cc - BMW N20/N26 2.0...

Select Vehicle

Category

Brand

Price

Shipping

Narrow Results