BMW Engine Parts for BMW 4 Series F36 (2015+)

Vargas Crank/Vibration Damper Bolts - M10 x 1.5

2X Entries Into Our F80 M3 Sweepstakes

T#:51778130

Part#: VTT-BMW-DAMPER-B

Ships in 10 Business Days

$ 157.99 USD

Add to Wish List

Qty

$ 157.99 USD

Add to Wish List

Protect your investment with the VTT/ARP 8740 Crank Vibration Damper Bolt kit.

Mishimoto Ignition Coil - Single - MMIG-BMW-02 - E46, E9x, F3x, E8x, ...

T#:51075090

Part#: MMIG-BMW-02

Ships in 3 Business Days

$ 72.99 USD

Add to Wish List

Qty

$ 72.99 USD

Add to Wish List

The Mishimoto BMW Ignition Coil is built to handle the intense heat cycles found in BMW’s modern turbocharged and naturally aspirated engines.

Hengst Oil Filter Kit - 11427566327 - E9x, F3x, E8x, F22, F23, E60, E...

5X Entries Into Our F80 M3 Sweepstakes

T#:57834329

Part#: 11427566327

Ships in 1 Business Day

$ 16.99 USD

Add to Wish List

Qty

$ 16.99 USD

Add to Wish List

When it comes to high-rpm durability on the street or track, effective oil filtration is non-negotiable.

Vargas Coolant Level Extension Harness - BMW B48/B58/S58

2X Entries Into Our F80 M3 Sweepstakes

T#:51813310

Part#: VTT-FAB-HC

Ships in 10 Business Days

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

Simplify your next fabrication project with the VTT-FAB series Coolant Extension Harness.

Kelford Camshaft Set - Gen 1.5 B58

T#:25938633

Part#: KEL-B58-GEN1.5

Ships in 3 Business Days

Starting at $ 2,394.98 USD

Add to Wish List

Starting at $ 2,394.98 USD

Add to Wish List

BMW B58 Gen1.5 - Stage 1 Street | Strip | Circuit Race | Road Race | Roll Race | Drift | E85 270° / 268° - 10.30mm / 10.15mm Valve Lift 270°/268° cams to suit BMW's Gen 1.5 B58 engine with bolt-on intake, exhaust, and turbo upgrades. For an engine producing around 550-750hp running a 58-68mm turbo. Still maintains full use of Valvetronic and Double VANOS for good throttle response and wide power band. Must have valve spring upgrade. BMW B58 Gen1.5 - Stage 2 Strip | Drag Race | Circuit Race | Road Race | Roll Race | Drift | E85 285° / 280° - 10.30mm / 10.60mm Valve Lift 285°/280° stage 2 racing cams for professionally built BMW Gen 1.5 B58 engine making 750hp-1000hp. Turbo sizing 62-72mm. Great with aftermarket intake plenums. Still can maintain full use of Valvetronic and Dual VANOS. Can run Valvetronic locked in the fully open position when using an aftermarket throttle body. Must have valve spring upgrade. BMW B58 Gen1.5 - Stage 3 Strip | Drag Race | Roll Race | Drift | E85 | Methanol 288° / 288° - 10.35mm / 10.80mm Valve Lift 288° Stage 3 drag racing cams for professionally built B58 Gen 1.5 engines making 1200hp+. Turbo sizing 72mm+ on high boost. Fuel-type ethanol blend or methanol. Must use aftermarket high-flow plenum with a throttle body conversion. Recommend locking the Valvetronic system at 100% swing. Must have valve spring upgrade. High Performance Valve Spring Kit - B58 Kelford's performance valve spring and titanium retainer kit is designed to work with the B58B30 straight-6 engine. Made using high-performance PACALOY™, this kit is sure to offer outstanding performance. This kit is specifically engineered to work well with their Stage 1, Stage 2, and Stage 3 camshafts to provide exceptional quality, reliability, and performance. 90lb seat pressure at 36.5 mm installed height; 193lb at 11.0 mm valve lift Spring coil bind height at 23.6 mm

Show More Show Less

ATI Super Damper / Harmonic Balancer - Stock Size - BMW B58A (Gen1), ...

T#:43142742

Part#: 918573

In Stock at Vendor

$ 418.99 USD

Add to Wish List

Qty

$ 418.99 USD

Add to Wish List

Vargas "Spine Lock" Crank Hub - BMW N55/S55

2X Entries Into Our F80 M3 Sweepstakes

T#:51918887

Part#: VTT-NS55CHO

Ships in 10 Business Days

$ 819.99 USD

Add to Wish List

Qty

$ 819.99 USD

Add to Wish List

The Vargas Spline Lock Crank Hub is the solution for BMW owners seeking to push their N55 or S55 engines to the limit without the fear of catastrophic timing failure.

Meistersatz Engine Oil Cooler Gasket - 11428637821G - E9x, F3x, F8x, ...

T#:57580054

Part#: 11428637821G

Ships in 3 Business Days

$ 12.99 USD

Add to Wish List

Qty

$ 12.99 USD

Add to Wish List

Keep your engine bay clean and prevent oil loss with an aftermarket oil filter housing gasket from Meistersatz.

Engine Mount - Right

T#:593117

Part#: 22116861406

Ships in 1 Business Day

$ 170.46

This product was last offered at the strikethrough price on
10-27-2026

$ 154.97 USD

Add to Wish List

Qty

$ 154.97 USD

Add to Wish List

Vargas Extended M7 Port Head Studs - Pair - BMW B58/N54/N55/S55 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:51672701

Part#: VTT-EXTENDED-STU

Ships in 10 Business Days

$ 3.99 USD

Add to Wish List

Qty

$ 3.99 USD

Add to Wish List

The VTT-FAB Extended M7 Studs are the professional’s choice for securing thick-flange manifolds on N54, N55, S55, and B58 engines.

Vargas DCS EWG System Billet Adapter With BMW Actuator - BMW ...

2X Entries Into Our F80 M3 Sweepstakes

T#:52094552

Part#: VTT-DCS-EWG-W-AC

Ships in 10 Business Days

$ 1,049.99 USD

Add to Wish List

Qty

$ 1,049.99 USD

Add to Wish List

the VTT DCS Billet Adapter with BMW Actuator is the definitive solution for converting to an electronic external wastegate.

Vargas Billet CNC Valve Cover - Gold - BMW B58 Gen 1

2X Entries Into Our F80 M3 Sweepstakes

T#:51848499

Part#: VTT-B58-BVC-GOLD

Ships in 10 Business Days

$ 1,879.99 USD

Add to Wish List

Qty

$ 1,879.99 USD

Add to Wish List

The VTT B58 Gen 1 Billet CNC Valve Cover in Gold is the ultimate functional upgrade for the BMW B58 engine.

CP Carrillo PRO-H Performance Connecting Rod Set - w/ 3/8" CARR Bolts...

T#:50521388

Part#: SCR13034-6

In Stock at Vendor

$ 2,189.99 USD

Add to Wish List

Qty

$ 2,189.99 USD

Add to Wish List

CP Carrillo's PRO-H connecting rods offer exceptional strength and durability for use in high-performance racing engines, capable of withstanding extreme, abusive forces. These rods are made from a proprietary alloy called Carrilloy and utilize an H-beam design for lower weight without compromising strength. This connecting rod set also includes CARR bolts, a multi-phase bolt rated to 285 KSI, which are good for unlimited torque cycles if not overstretched or overheated.

Show More Show Less

Battery Cable - With Pole

T#:54388517

Part#: 61129259425

Ships in 1 Business Day

$ 126.99 USD

Add to Wish List

Qty

$ 126.99 USD

Add to Wish List

On the track or on the street, your BMW’s electrical architecture demands absolute consistency. A degraded positive battery cable introduces unwanted resistance, leading to weak starts, alternator strain, and erratic module behavior. When it’s time to replace a compromised factory cable, you don’t need over-hyped marketing—you need a part that fits precisely and restores factory grid integrity.

Show More Show Less

EWG BILLET CNC Valve Cover - Red

2X Entries Into Our F80 M3 Sweepstakes

T#:41695014

Part#: VTTS55BILLETVCRE

Ships in 10 Business Days

$ 1,519.99 USD

Add to Wish List

Qty

$ 1,519.99 USD

Add to Wish List

Absolutely — here’s a reworded version of the product description in the ECS Tuning dialect, capturing the same details with a more engaging and enthusiast-focused tone: --- **VTT Billet CNC Valve Cover – S55/N55 EWG** Say goodbye to brittle factory plastics and elevate your engine bay with the Vargas Turbo Technologies Billet CNC Valve Cover – the ultimate solution for BMW S55 and N55 EWG owners chasing reliability, performance, and high-end style. Precision-crafted from 100% CNC-machined 6061-T6 aircraft-grade aluminum, this cover ditches the OEM failure-prone plastic for a rugged, motorsport-ready upgrade that’s built to take the heat – and the boost. ### Why It Belongs in Your Build: * **Bulletproof Construction:** Solid billet aluminum means no cracks, no leaks – just unshakable strength that outlasts stock plastic by miles. * **Performance-Minded Weight:** At only 9.7 lbs, it’s a lightweight beast – just 1.8 lbs heavier than stock, but loaded with benefits. * **Anodized Armor:** Dress your engine bay with anodized color options – choose clear, black, red, blue, or gold to match your vibe. * **Custom PCV Configs:** Kills the fragile OEM PCV setup and gives you flexibility for a clean, powerful crankcase solution – whether you're keeping it stock or running a full catch can. * **Baffled to Perfection:** Integrated baffling keeps oil where it belongs, not in your intake tract. * **All-In Kit:** Comes ready to rock with ORB plugs or banjo fittings, plus -10 silicone hose – install and go. ### Heads Up on Install: Upgrading to this billet beauty wipes out the stock PCV – and that's a good thing. But to keep your engine breathing right, you’ll need an external PCV setup to maintain crankcase vacuum at idle. Want max reliability? Block off those head ports and let this cover handle the pressure without relying on a gasket alone. ### Built for Big Power: If you're running a single turbo conversion, this is your cover. It offers cleaner lines, better heat resistance, and improved fitment where it counts. ### Customize Your Cover: * **Finish Options:** Clear, black, red, blue, or gold anodizing. * **Breather Cap Choices:** Stock-style oil cap or a VTT billet one-way breather. * **Fitting Options:** Dual -10 ORB plugs, or go hybrid with a banjo and plug. * **Titanium Hardware:** Add some flair with black, burnt, or natural finish Ti bolts. * **Catch Can Ready:** Pair with VTT’s catch can for a full crankcase solution. ### Backed by VTT: Includes a 12-month warranty for confidence on and off the track. ### Price: Starting at \$1,499.00 – premium build, race-ready features, and engine bay clout to match. --- Let me know if you want this in shorter format for a product listing, social caption, or email drop.

Show More Show Less

Vargas Charge Pipe Weld MAP Sensor Bung Flange - BMW B48, B58, S58 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:52094555

Part#: VTT-FAB-015

Ships in 10 Business Days

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

The VTT-FAB Billet MAP Sensor Bung is the definitive choice for tuners and fabricators seeking a reliable mounting solution for B48, B58, and S58 platforms.

N54/N55 Single turbo head flange (Mild steel)

2X Entries Into Our F80 M3 Sweepstakes

T#:398016

Part#: VTT-FLNG-1

Ships in 10 Business Days

$ 393.99 USD

Add to Wish List

Qty

$ 393.99 USD

Add to Wish List

Looking to go big single turbo? Now you can with this Vargas Turbo N54/N55 flange. Designed to give you the ability to go big single, Vargas Turbo has done it again. Available in mild steel or stainless steel, this flange is perfect for anyone who's looking to step apart from the norm and look to make big power.

Starting in 1978, Vargas Turbo Technologies was built upon the dream of utilizing then-new turbocharger technology to improve the performance of everything from cars to boats. On the cutting edge since the beginning, the company has grown with the industry, servicing diesel and industrial turbochargers. Returning to their hot-rod roots, Vargas has jumped head-first into the BMW performance market, filling a need for high-quality, cost effective turbocharger upgrades for everything from daily-driven street cars to all-out racing machines.

Show More Show Less

Carrillo Turbo Piston Rings - B58/B48

T#:59074964

Part#: CPT-3228PVD

In Stock at Vendor

$ 33.99 USD

Add to Wish List

Qty

$ 33.99 USD

Add to Wish List

Kelford Camshaft Set - Gen 1 B58

T#:25938620

Part#: KEL-CSS-B58-GEN1

Ships in 3 Business Days

Starting at $ 2,394.98 USD

Add to Wish List

Starting at $ 2,394.98 USD

Add to Wish List

BMW B58 Gen1 - Stage 1 Street | Strip | Circuit Race | Road Race | Roll Race | Drift | E85 270° / 268° - 10.30mm / 10.15mm Valve Lift 270°/268° cams to suit BMW's Gen 1 B58 engine with bolt-on intake, exhaust, and turbo upgrades. For an engine producing around 550-750hp running a 58-68mm turbo. Still maintains full use of Valvetronic and Double VANOS for good throttle response and wide power band. Must have valve spring upgrade. BMW B58 Gen1 - Stage 2 Strip | Drag Race | Circuit Race | Road Race | Roll Race | Drift | E85 285° / 280° - 10.30mm / 10.60mm Valve Lift 285°/280° stage 2 racing cams for professionally built BMW Gen 1 B58 engine making 750hp-1000hp. Turbo sizing 62-72mm. Great with aftermarket intake plenums. Still can maintain full use of Valvetronic and Dual VANOS. Can run Valvetronic locked in the fully open position when using an aftermarket throttle body. Must have valve spring upgrade. BMW B58 Gen1 - Stage 3 Strip | Drag Race | Roll Race | Drift | E85 | Methanol 288° / 288° - 10.35mm / 10.80mm Valve Lift 288° Stage 3 drag racing cams for professionally built B58 Gen 1 engines making 1200hp+. Turbo sizing 72mm+ on high boost. Fuel-type ethanol blend or methanol. Must use aftermarket high-flow plenum with a throttle body conversion. Recommend locking the Valvetronic system at 100% swing. Must have valve spring upgrade. High Performance Valve Spring Kit - B58 Kelford's performance valve spring and titanium retainer kit is designed to work with the B58B30 straight-6 engine. Made using high-performance PACALOY™, this kit is sure to offer outstanding performance. This kit is specifically engineered to work well with their Stage 1, Stage 2, and Stage 3 camshafts to provide exceptional quality, reliability, and performance. 90lb seat pressure at 36.5 mm installed height; 193lb at 11.0 mm valve lift Spring coil bind height at 23.6 mm

Show More Show Less

Manley H-Beam Connecting Rod Set - BMW Toyota B58 Gen1 & Gen2 ...

T#:55066626

Part#: MAN-CRS-B58

Ships in 3 Business Days

$ 999.99 USD

Add to Wish List

Qty

$ 999.99 USD

Add to Wish List

Designed for the demands of high-performance builds, the Manley H-Beam Connecting Rod Set is the perfect upgrade for BMW/Toyota B58 engines. Manufactured from premium 4340 steel forgings, these rods offer a lightweight construction without compromising strength. Engineered to replace BMW part numbers #11248623419 and #11247589671, the 148mm-long rods are ideal for high-horsepower and forced-induction applications. Whether you're tuning for street, track, or drag racing, these rods can handle up to 8500 RPM and support engines producing up to 1200 horsepower. Each set includes ARP 2000 rod bolts, providing additional clamping force and reliability under extreme conditions.

Show More Show Less

Hitachi N20 N55 Fuel Supply Module - 16117243975 - E9x, F3x, E8x, F22...

T#:48850079

Part#: 16117243975

Ships in 6 Business Days

$ 344.99 USD

Add to Wish List

Qty

$ 344.99 USD

Add to Wish List

Delivers fuel from the tank to the engine.

Vargas Billet Extended Turbo Drain Adapter - T3/T4 Square, Garrett GT...

For vehicles with Garrett GT, GTX, G series or T3/T4 Turbos

2X Entries Into Our F80 M3 Sweepstakes

T#:52129710

Part#: VTT-FAB-081

Ships in 10 Business Days

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

Upgrade your custom turbo setup with the Vargas Turbo Technologies VTT-FAB-081 Billet Extended Drain Adapter.

VTT B58 Cylinder Head Port Check Valve Kit - B58 Gen1/2/3 (B58/B58TU/...

2X Entries Into Our F80 M3 Sweepstakes

T#:49822558

Part#: VTTB58CHECK

Ships in 10 Business Days

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

The VTT B58 Head Port Check Valve Kit is designed to convert the factory head ports used by the OEM low-side PCV system. These ports in the cylinder head utilize engine vacuum to evacuate crankcase gases, but in the process, can allow oil to enter the intake manifold, leading to valve carbon buildup and other performance issues over time. VTT's Billet Check Valve kit converts the head ports into a robust internal PCV system using precision-engineered check valves. These one-way valves allow vacuum to function as intended while blocking boost pressure from entering the crankcase or charge tract.

Show More Show Less

Engine Intake Manifold Gasket

T#:5216000

Part#: 11618637800

Ships in 1 Business Day

$ 18.99

This product was last offered at the strikethrough price on
05-07-2026

$ 16.99 USD

Add to Wish List

Qty

$ 16.99 USD

Add to Wish List

Gasket that goes between the intake manifold and the engine Gasket seal for the Intake Manifold/Charge Air Cooler. -6 required for B58 motors -4 required for B46 and B48 motors

Hitachi Camshaft Position Sensor - BMW E9X F3X F8X N20 N52 N55 S55 ...

T#:48815454

Part#: 13627525014

Ships in 6 Business Days

$ 40.00 USD

Add to Wish List

Qty

$ 40.00 USD

Add to Wish List

The camshaft position sensor communicates the position of the camshaft to the computer. This helps the computer to calculate proper spark and fuel control. If you're struggling with CELs, hard starts or no starts, stalling, and/or a rough idle, you may need to replace the cam position sensor.

Show More Show Less

JE Pistons BMW N55B30

T#:33612897

Part#: 3380966

In Stock at Vendor

$ 1,649.99 USD

Add to Wish List

Qty

$ 1,649.99 USD

Add to Wish List

JE Pistons for the N55 engine are precision-engineered for BMW’s single-turbo 3.0L inline-six. These forged pistons are built for high-performance applications, offering exceptional strength and durability under extreme conditions. Designed to handle high boost pressures and increased power, they feature optimized crown shapes and valve reliefs to improve combustion efficiency. Their lightweight construction reduces rotational mass, enhancing throttle response and engine efficiency. With customizable options for compression ratios and coatings, JE Pistons are ideal for tuning and motorsport setups, ensuring reliable performance in both street and track environments.

Show More Show Less

Hitachi Ignition Coil - BMW B58 B48/46 B38

T#:48850056

Part#: 12137619385

Ships in 6 Business Days

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

Get your engine's spark back with new ignition coils.

Vargas Billet Extended Turbo Drain Adapter - T3/T4 -10 AN - BMW B58, ...

2X Entries Into Our F80 M3 Sweepstakes

T#:52094591

Part#: VTT-FAB-062

Ships in 10 Business Days

$ 53.99 USD

Add to Wish List

Qty

$ 53.99 USD

Add to Wish List

If you are fabricating a custom single-turbo kit or upgrading your current setup, the VTT-FAB-062 is an essential component for a clean and reliable oiling system.

JE Pistons BMW N55B30 84mm Bore 9.5:1 Compression Ratio -14.7 Dish FS...

T#:590161

Part#: 338096

In Stock at Vendor

$ 1,649.99 USD

Add to Wish List

Qty

$ 1,649.99 USD

Add to Wish List

Dorch Engineering EWG N55 49% Lift Kit – HPFP Upgrade - with $400 c...

T#:55569521

Part#: DE-LK-1049-EWGKT

Ships in 4 Business Days

$ 1,799.00 USD

Add to Wish List

Qty

$ 1,799.00 USD

Add to Wish List

Engineered specifically for high power builds that push the direct injection threshold, this lift kit overrides the typical N55 fueling bottleneck by overdriving the high pressure fuel pump mechanism.

PFS Port Injection Kit - 900CC - PFS-B58-PI-8 - F3x, G20, G22, G23, G...

T#:51813340

Part#: PFS-B58-PI-8

Ships in 10 Business Days

$ 2,159.99 USD

Add to Wish List

Qty

$ 2,159.99 USD

Add to Wish List

When factory fueling becomes the bottleneck in your B58 build, the Vargas Turbo Technologies PFS Port Injection Kit steps in as the ultimate hardware solution.

ARP Cylinder Head Stud Kit - Custom Age 625+ - BMW B58 3.0L

T#:47610654

Part#: 401-4701

In Stock at Vendor

20% off MSRP $ 1,027.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 822.99 USD

Add to Wish List

Qty

20% off MSRP

$ 1,027.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 822.99 USD

Add to Wish List

For engine builders pushing the absolute limits of high-performance engineering, the ARP Custom Age 625+ Cylinder Head Stud Kit represents the pinnacle of fastening technology. While standard aircraft-quality steels and even the renowned ARP2000 alloy are impressive, the proprietary Custom Age 625+ super-alloy provides a massive leap in capability by increasing tensile strength by an additional 40,000 to 60,000 psi. This specialized hardware is engineered specifically for ultra-high-boost applications, offering superior fatigue resistance and the unique ability to maintain its structural integrity under extreme temperatures that would cause lesser materials to weaken.

Show More Show Less

Meistersatz Crankshaft Seal - 11118618864 - E9x, F3x, F8x, E8x, F22, ...

T#:57580045

Part#: 11118618864

Ships in 3 Business Days

$ 43.99 USD

Add to Wish List

Qty

$ 43.99 USD

Add to Wish List

This high-quality component from Meistersatz is built to match strict factory tolerances, giving enthusiast drivers a reliable solution for precision repair.

Valvetronic Actuator

T#:52762524

Part#: 11377603979

Ships in 1 Business Day

$ 818.99

This product was last offered at the strikethrough price on
05-08-2026

$ 414.99 USD

Add to Wish List

Qty

$ 414.99 USD

Add to Wish List

Dorch Engineering PWG N55 49% Lift Kit – HPFP Upgrade - with $400 c...

T#:55569525

Part#: DE-LK-1049-PWGKT

Ships in 4 Business Days

$ 1,799.00 USD

Add to Wish List

Qty

$ 1,799.00 USD

Add to Wish List

The Dorch Engineering N55 PWG Lift Kit is the upgrade your BMW needs. By optimizing the fuel pump lift profile, this kit allows your HPFP to pump significantly more fuel per revolution. Designed specifically for the early Pneumatic Wastegate (PWG) N55 engines

Show More Show Less

Shaft Seal - Priced Each

2X Entries Into Our F80 M3 Sweepstakes

T#:17173396

Part#: 11148602594

Ships in 1 Business Day

$ 25.99

This product was last offered at the strikethrough price on
05-07-2026

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

5150 AutoSport & Cat Cams Camshaft Set - 278* / 272* - 11.20mm / 10.3...

T#:39126861

Part#: N55CCCAM-278-272

Ships in 3 Business Days

$ 1,799.99 USD

Add to Wish List

Qty

$ 1,799.99 USD

Add to Wish List

Cat Cams offer great performance at a reasonable price. Cat Cam offers cams in the most popular enthusiast upgrade specs to ensure there is an option for whatever your power goal is. This N55 camshaft set is designed to bring your engine to the next level! Whether it's for street or track purposes, this camshaft set offers the power gains and throttle response needed to push your N55 to its limits. These camshafts are a direct fit for seamless installation and with some simple tuning can produces great power while retaining factory-like idle and driveability. Valvetronic and Dual VANOS functionality can be fully retained, or with an aftermarket throttle body, the valvetronic system can be locked open, providing even more control.

Show More Show Less

Dorch Engineering EWG N55 38% Lift Kit – HPFP Upgrade - with $400 c...

T#:55569519

Part#: DE-LK-1038-EWGKT

Ships in 4 Business Days

$ 1,799.00 USD

Add to Wish List

Qty

$ 1,799.00 USD

Add to Wish List

The Dorch Engineering Lift Kit HPFP Upgrade is engineered to completely eradicate direct-injection fueling limitations, providing up to 38% more flow volume on top of your existing Dorch fuel pump setup.

Show More Show Less

Flex Fuel ECA - Plug And Play - OG Dorch HPFP - F22, F23, F30, F34, F...

T#:55713499

Part#: DE-581-ECA-14OG

Ships in 4 Business Days

$ 549.00 USD

Add to Wish List

Qty

$ 549.00 USD

Add to Wish List

The Dorch Engineering CAN-based Flex Fuel ECA Kit delivers real-time ethanol monitoring directly to your BMW's DME. Designed explicitly for Gen1 B58

Vargas "Spline Lock" Crank Hub Solution - BMW N55 & S55

2X Entries Into Our F80 M3 Sweepstakes

T#:51918889

Part#: VTT-NS55CHSCP

Ships in 10 Business Days

$ 889.99 USD

Add to Wish List

Qty

$ 889.99 USD

Add to Wish List

The VTT Spline Lock Crank Hub Solution represents a massive leap in drivetrain engineering by moving away from friction-based or pinned interfaces.

Vargas Billet Adapter With Straight Gate For EWG DCS - BMW

2X Entries Into Our F80 M3 Sweepstakes

T#:52094551

Part#: VTT-DCS-EWG-ONLY

Ships in 10 Business Days

$ 839.99 USD

Add to Wish List

Qty

$ 839.99 USD

Add to Wish List

The Universal DCS System is the ultimate boost control solution for any vehicle, regardless of whether it came with factory electronic wastegate control.

Vargas HPFP Block-Off Plate - BMW B58 & S58

2X Entries Into Our F80 M3 Sweepstakes

T#:51672724

Part#: VTT-X58-HPFP-BLO

Ships in 10 Business Days

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

The VTT Billet B58 HPFP Block-off Plate allows you to cleanly remove the bulky factory pump, reducing engine bay clutter and weight.

Denso Starter Motor - BMW N55 S55 3.0L

For vehicles with an Automatic Transmission

T#:40004863

Part#: 12417631559

Ships in 1 Business Day

$ 459.99

This product was last offered at the strikethrough price on
05-07-2026

$ 391.99 USD

Add to Wish List

Qty

$ 391.99 USD

Add to Wish List

If your car won't turn over, there is a good chance your starter is shot. Denso's OEM starter is a high quality replacement that will give you peace of mind thanks to its long life-span.

VTT Low-Profile Crankcase Vent Adapter -16ORB - BMW S58, B58TU ...

2X Entries Into Our F80 M3 Sweepstakes

T#:51672705

Part#: VTT-S/B58-LP-CC-

Ships in 10 Business Days

$ 41.99 USD

Add to Wish List

Qty

$ 41.99 USD

Add to Wish List

The VTT Low-Profile Crankcase Vent Adapter is the definitive solution for high-boost BMW builds where hood clearance is a premium.

Ferrea High Performance Valve Kit - B58

T#:29035337

Part#: FER-HPVK-B58-T29

Ships in 3 Business Days

$ 929.00 USD

Add to Wish List

Qty

$ 929.00 USD

Add to Wish List

The BMW B58 engine can significantly benefit from the high-performance Ferrea valve kit, featuring the renowned Ferrea Competition Plus Valves. Known as the industry’s most dependable extreme-duty valves, these valves are crafted using special aerospace-grade alloys, including the high tensile strength EV8-Z18. To ensure unparalleled quality, an exclusive two-step slow forging process is utilized, promoting optimal grain flow and minimizing material structure damage. Additionally, the valves undergo a rigorous 48-hour heat treatment and stress-relieving process, crucial for maintaining their molecular integrity. The final touch is the application of avionics-quality hard chrome and a specially hardened tip, ensuring exceptional durability and reliability.

Show More Show Less

Vargas EWG Actuator To Garrett G25-G35 Housing Bracket - BMW EWG G25/...

For vehicles with Electronic Waste Gate

2X Entries Into Our F80 M3 Sweepstakes

T#:51778114

Part#: VTT-FAB-BMW-EWG-

Ships in 10 Business Days

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

The Vargas EWG Actuator Bracket is the definitive solution for enthusiasts looking to merge BMW’s advanced factory EWG control with the high-performance capabilities of Garrett G-Series turbochargers.

Show More Show Less

Walker MAP Sensor - BMW N20 N26 S55 S63

T#:39059258

Part#: 13627843531

Ships in 1 Business Day

$ 139.99

This product was last offered at the strikethrough price on
05-07-2026

$ 135.99 USD

Add to Wish List

Qty

$ 135.99 USD

Add to Wish List

This is a replacement Manifold Absolute Pressure sensor Located on the charge air cooler. The MAP controls the amount of fuel that goes through the injectors based on the pressure of air at the intake manifold. If your vehicle is giving you a MAP code, replace it immediately to ensure you get the best gas mileage and performance. It is common for this part to fail slowly and cause poor fuel mileage and hampered performance. When it fails, the vehicle will stutter and stall as it falls into a limp mode. One way to check if your MAP is bad is to unplug the connector before starting your car. If it idles well (compared to a previous poor idle), your MAP sensor likely needs to be replaced. If you let this maintenance part go, your fuel economy will suffer as too much fuel is going into the engine and not being burned. A great way to give your vehicle an efficiency boost.

Show More Show Less