BMW Fuel System Parts for BMW 4 Series F36 (2015+)

Clear BMW chassis

Please ensure your correct model is selected

Looking for a BMW fuel pump, BMW gas cap or other BMW fuel system related items? You've found the right place. Your BMW fuel delivery system is a critical system, and any failure can rended your BMW dead in the water. Whether your fuel pump has stopped pumping, a fuel injector is clogged or not spraying, or your gas cap is either lost or not properly sealing, we likely have what you are looking for. We stock thousands of BMW fuel system parts so if you don't see what you are looking for, just give us a call.

Sub-Categories

Sort By:

Genuine BMW Decoupling Element - 13537577649
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Genuine BMW - Corporate Logo
T#:42226
Part#: 13537577649
In Stock
$ 16.76 USD
Free Shipping on orders $49 and up


Genuine BMW Decoupling Element -
This item fits the following BMW Chassis:
E71,E82,E89 Z4,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N20,N26,N55,N63N,S55,S63N

Show More Show Less
SPOOL FX-200 Upgraded High Pressure Fuel Pump - BMW N55
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Spool Performance - Corporate Logo
T#:26271786
Part#: SP-FX-200-N55-NE
In Stock
$ 1,799.00 USD
Free Shipping on orders $49 and up
The FX-200 is an advanced high-pressure fuel pump engineered specifically for the BMW N55 engine, replacing our previous FX180 model. Featuring a larger bore size than the stock pump, it provides nearly double the flow rate. This pump is fully E85 fuel compatible and integrates seamlessly into the system without requiring any wire cutting or splicing. The enhanced flow capacity enables the use of higher ethanol concentrations and supports sufficient fueling for larger turbochargers.
Show More Show Less
OEM Bosch Fuel Injector Replacement Kit - BMW B46/B48 2.0L (Gen1 B46A...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Bosch - Corporate Logo
T#:50031891
Part#: BB48AFIRKT
In Stock
New Item
$ 356.99 USD
Free Shipping on orders $49 and up
$ 356.99 USD
Free Shipping on orders $49 and up
This Fuel Injector Replacement Kit includes new injectors and hardware to service your fuel injection system, eliminating rough idle, low power, and check engine lights due to faulty fuel injectors.

B58 Port Injection Kit - Black - 950cc Injectors
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Precision Raceworks - Corporate Logo
T#:3239419
Part#: 601-0187
In Stock
$ 1,449.99 USD
Free Shipping on orders $49 and up

Pro-Line Injector And Glow Plug Grease - 20g
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Liqui-Moly - Corporate Logo
T#:49787695
Part#: 22243
In Stock
New Item
$ 6.99 USD
Free Shipping on orders $49 and up
This high-performance lubricant is formulated to prevent moisture ingress and oxidation, which are the primary causes of "frozen" injectors and glow plugs.
Genuine BMW Fuel Injector Installation Kit - B58
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Genuine BMW - Corporate Logo
T#:27805180
Part#: 13537591006KT
In Stock
$ 206.99 USD
Free Shipping on orders $49 and up

Kit Includes:

6 Genuine BMW Injector Seals - 13537591006 6 Genuine BMW Injector Brackets - 13538642294 6 Genuine BMW Star Socket Screws - 13538661716


Fuel-It! Port Injection Kit - N55 F-Series
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Fuel-It! - Corporate Logo
T#:403364
Part#: FIEPIK5
Ships on Jul 21, 2026
Starting at $ 1,688.99 USD
Free Shipping
Starting at $ 1,688.99 USD
Free Shipping

Are you running more E85 or making more power on pump gas than your HPFP (High-Pressure Fuel Pump) can support?

Fuel-it has developed a port injection kit for your S55 that will provide you with the additional fueling capacity that you need to be able to run up to 100% E85 on stock or upgraded turbos.

What is port injection?

Port injection is a kit that is installed between your intake manifold and the cylinder head that runs off the low-pressure supply to provide you with more fueling than your stock system is capable of.  It's a relatively easy system to install and does not require any permanent modification to your car.

Port injection kits are offered in five different packages to meet your needs:

Base port injection kit: (included in Bronze, Silver or Platinum Kits)

  • Fuel-It! custom black anodized spacer for the intake manifold
  • Fuel-It! custom black anodized fuel rail
  • Black anodized aluminum and stainless steel hardware
  • Dual fuel supply port for those that are running inlets in the stock location (email us for info)
  • Optional return port for those that will be running an upgraded fuel pressure regulator 
  • Six of the following:
    • Flow matched Bosch injectors (52#)
    • Extended length steel bolts for mounting your new spacer 
    • BMW OEM gaskets

Bronze kit includes:

  • Base port injection kit
  • Basic fuel line connection kit
    • Two custom Fuel-It! fittings to maintain your stock fuel line connections at the HPFP and the feed line as it enters the engine bay
    • -6an (3/8") upgraded fuel lines
    • High flow custom Fuel-It! "Y" adapter
    • -6an fuel rail connection

Silver kit includes:

  • Base port injection kit
  • Basic fuel line connection kit​
  • An upgraded fuel line that completely replaces the stock fuel line

Platinum kit includes:

  • Base port injection kit
  • Basic fuel line connection kit​
  • An upgraded fuel line that completely replaces the stock fuel line​
  • Integrated ethanol sensor​
  • Bluetooth and JB4 compatible ethanol analyzer
    • JB4 integration compatible 0-5volt
    • Bluetooth (iPhone or Android app must be purchased to use this feature)

*These kits are available for off-road use only

*All port injection kits are built to order.

*Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated, your ethanol readings may be artificially elevated.

Show More Show Less
Fuel Pump Lock Ring
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
URO - Corporate Logo
T#:8741229
Part#: 16117188565
Ships in 1 Business Day
$ 19.99

This product was last offered at the strikethrough price on
01-04-2026

$ 18.19 USD
Free Shipping on orders $49 and up
$ 18.19 USD
Free Shipping on orders $49 and up

Fuel-It! Elite Port Injection Kit With 950cc Injectors & Fuel Line ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Fuel-It! - Corporate Logo
T#:26038542
Part#: BMW-EPI-950
Ships on Jul 21, 2026
$ 1,188.00 USD
Free Shipping on orders $49 and up

This kit is designed to enhance performance by adding six supplemental low-pressure fuel injectors, capable of supporting 1000+ WHP on E85 and similar high-performance fuels.

Crafted with precision, the manifold spacers are CNC machined and anodized to ensure durability and prolonged service life. Each kit comes complete with all necessary installation hardware, a gasket set, and a plug-and-play fuel line adapter for seamless integration.

The Elite kit stands out with its sleek black anodized finish and includes an additional return port, an upgraded fuel line, and enhanced machining to accommodate a wider range of applications, including the BMW S55 engine.

A port injection controller is not included. This is required for a complete installation.

Show More Show Less

BMW Port Injection Kit - B58 2015+
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Fuel-It! - Corporate Logo
T#:38890887
Part#: BMS-PIK-B58
Ships on Jul 21, 2026
$ 699.00 USD
Free Shipping on orders $49 and up
The Fuel-It! Port Injection Manifold Spacers are precisely CNC-machined for a seamless, factory-like fit and anodized black for enhanced durability and a sleek appearance. This port injection kit includes all necessary installation hardware, heavy-duty gaskets, and a plug-and-play BMS braided fuel line adapter. To complete the kit, you'll need the Fuel Line, Fuel Injectors, and a Port Injection Controller, which are available separately or can be added to your package. An aftermarket charge pipe is required to accommodate the additional height of the manifold. For Gen 1 B58, we recommend the BMS Elite Aluminum Replacement Charge Pipe Upgrade, while for Gen 2 B58, options include the BMS Elite BMW/Supra B58TU Gen2 Charge Pipe Blow-Off Valve (BOV) Kit or the BMS Elite BMW/Supra B58TU Gen2 Charge Pipe.
Show More Show Less
Bosch Injector Seal
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Bosch - Corporate Logo
T#:591890
Part#: 13537591006
In Stock at Vendor
$ 4.07 USD
Free Shipping on orders $49 and up
Seal that goes from the end of the injector to the motor
Radium - Split-Flow Flex Fuel Sensor Adapter
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Radium Engineering - Corporate Logo
T#:53290958
Part#: 20-0589
In Stock at Vendor
New Item
$ 99.99 USD
Free Shipping on orders $49 and up


Fuel-It! Bluetooth Flex Fuel Kit - B46/B48/B58
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Fuel-It! - Corporate Logo
T#:21209854
Part#: FFK-B464858
Ships on Jul 21, 2026
Starting at $ 479.99 USD
Free Shipping on orders $49 and up
Starting at $ 479.99 USD
Free Shipping on orders $49 and up
If you're running E85 or ethanol mixes in your BMW, you need this kit! As many of you know the BMW motors can be very picky about how much ethanol you run to achieve peak performance but not run lean. Consequently, BMS have put together a kit enabling you to easily install an ethanol sensor with no permanent modifications needed. You will simply remove your low pressure fuel line in the engine bay and plug in our kit. It's a complete plug and play solution that utilizes our Bluetooth app to monitor your ethanol content. When you are ready to return to stock, you will simply remove the kit and re-install the stock fuel line. The complete kit includes the following: Genuine Continental ethanol sensor Fuel-It! Bluetooth Universal Analyzer Two stainless steel braided fuel lines with black nylon sheathing to protect your other engine bay components Proprietary custom billet fittings for plug and play OEM integration One wiring harness with Posi-tap connector Bluetooth Model Supports stand-alone Bluetooth operation with the Fuel-It! app *For the JB4 platform connect the white wire to position #4 on the JB4 25 pin harness. Select WMI Ethanol Setup option 0 to enable pin location 2/3/4 flex fuel input. *Ethanol Sensors don't actually read the ethanol content, the readings are based on the absence of gasoline, so if your fuel is contaminated your ethanol readings may be artificially elevated.
Show More Show Less
High-pressure fuel pump supply port caps
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
AGA Tools - Corporate Logo
T#:5135636
Part#: AGA-CP-0-14
Ships in 7 Business Days
$ 8.99 USD
Free Shipping on orders $49 and up
Don't let dirt be the reason for bad fuel injectors.
Decoupling Element - Each
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Bremmen Parts - Corporate Logo
T#:27105152
Part#: 13537577649
In Stock at Vendor
$ 12.99

This product was last offered at the strikethrough price on
06-08-2026

$ 12.73 USD
Free Shipping on orders $49 and up
$ 12.73 USD
Free Shipping on orders $49 and up

Decoupling Element - Each is a crucial component for BMW vehicles, specifically designed to ensure optimal injector installation. This high-quality metal ring is positioned at the end of the fuel injector, playing a vital role in maintaining proper alignment and function.

Features and Benefits:

  • Essential Component: Integral for correct injector installation and operation.
  • High-Quality Construction: Made from durable metal to withstand the rigors of engine performance.
  • Precision Fitment: Ensures proper alignment of the fuel injector, enhancing engine efficiency.
  • Easy Installation: Designed for straightforward installation without the need for modifications.
  • Compatibility: Suitable for a range of BMW models, ensuring versatile use.
Show More Show Less

PFS Port Injection Kit - B58
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Aftermarket charge pipe required
Vargas Turbo Technologies - Corporate Logo
T#:5663657
Part#: PFS-B58-PI
Ships in 10 Business Days
Sale - Save 15% $ 733.99

This product was last offered at the strikethrough price on
07-02-2026

Starting at $ 623.89 USD
Free Shipping on orders $49 and up
Sale - Save 15%
$ 733.99

This product was last offered at the strikethrough price on
07-02-2026

Starting at $ 623.89 USD
Free Shipping on orders $49 and up
The kit includes all the parts needed for installation and has a choice of 550CC, or 900CC US-made DW injectors (larger available by request), and a Motiv Reflex Controller

CTS Turbo B58 Port Fuel Injection Kit - BMW F22/23 F3X B58
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
CTS - Corporate Logo
T#:50899215
Part#: HW-550
Ships in 7 Business Days
New Item
15% off MSRP $ 799.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 679.99 USD
Free Shipping
15% off MSRP
$ 799.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 679.99 USD
Free Shipping
The CTS Turbo B58 Port Injection Kit is designed for the Gen1 B58 engine, offering a seamless integration that looks as if it came factory-installed. This kit includes everything necessary to add multi-port injection, ensuring even fuel distribution across all cylinders. Compatible with popular injectors like 750cc and 950cc, it also supports the controller of your choice, whether you prefer Motiv Reflex or AIC-1. This kit is built for those who demand performance without sacrificing the clean, OEM look under the hood.
Show More Show Less
N55 DS25 HPFP Upgrade
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Dorch Engineering - Corporate Logo
T#:55533499
Part#: DE-55-25A
Special Order: No Guaranteed ETA
New Item
$ 1,699.00 USD
$ 1,699.00 USD
The Dorch Engineering DS25 N55 HPFP Upgrade is the definitive solution for enthusiast drivers looking to extract maximum power from their N55. Optimized for high output setups, this upgraded pump delivers a critical 25% bump in fueling capacity over the factory unit
Show More Show Less

Vargas HPFP Block-Off Plate - BMW B58 & S58
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Vargas Turbo Technologies - Corporate Logo
T#:51672724
Part#: VTT-X58-HPFP-BLO
Ships in 10 Business Days
New Item
Sale - Save 15% $ 99.99

This product was last offered at the strikethrough price on
07-02-2026

$ 84.99 USD
Free Shipping
Sale - Save 15%
$ 99.99

This product was last offered at the strikethrough price on
07-02-2026

$ 84.99 USD
Free Shipping
The VTT Billet B58 HPFP Block-off Plate allows you to cleanly remove the bulky factory pump, reducing engine bay clutter and weight.
Dorch Engineering B58 Gen1 DS3 HPFP Upgrade - F22, F23, F30, F34, F32...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Dorch Engineering - Corporate Logo
T#:55533509
Part#: DE-581-30A
Special Order: No Guaranteed ETA
New Item
$ 2,399.00 USD
$ 2,399.00 USD
The Dorch Engineering DS3 B58 Gen 1 HPFP Upgrade is the ultimate solution for drivers looking to lift the fueling restrictions on their B58 powerplant. Optimized for high-output setups, this upgraded pump ensures your injectors are supplied with the precise volume
Show More Show Less

PFS Port Injection Kit - 900CC - BMW B58
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
PFS - Corporate Logo
T#:51813340
Part#: PFS-B58-PI-8
Ships in 10 Business Days
New Item
$ 2,159.99 USD
Free Shipping
$ 2,159.99 USD
Free Shipping
When factory fueling becomes the bottleneck in your B58 build, the Vargas Turbo Technologies PFS Port Injection Kit steps in as the ultimate hardware solution.

Dorch Engineering PWG N55 49% Lift Kit – HPFP Upgrade - with $400 c...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Dorch Engineering - Corporate Logo
T#:55569525
Part#: DE-LK-1049-PWGKT
Ships on Aug 3, 2026
New Item
$ 1,799.00 USD
$ 1,799.00 USD
The Dorch Engineering N55 PWG Lift Kit is the upgrade your BMW needs. By optimizing the fuel pump lift profile, this kit allows your HPFP to pump significantly more fuel per revolution. Designed specifically for the early Pneumatic Wastegate (PWG) N55 engines
Show More Show Less
Dorch Engineering EWG N55 38% Lift Kit – HPFP Upgrade - with $400 c...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Dorch Engineering - Corporate Logo
T#:55569519
Part#: DE-LK-1038-EWGKT
Ships on Aug 3, 2026
New Item
$ 1,799.00 USD
$ 1,799.00 USD
The Dorch Engineering Lift Kit HPFP Upgrade is engineered to completely eradicate direct-injection fueling limitations, providing up to 38% more flow volume on top of your existing Dorch fuel pump setup.
Show More Show Less
Dorch Engineering EWG N55 49% Lift Kit – HPFP Upgrade - with $400 c...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Dorch Engineering - Corporate Logo
T#:55569521
Part#: DE-LK-1049-EWGKT
Ships on Aug 3, 2026
New Item
$ 1,799.00 USD
$ 1,799.00 USD
Engineered specifically for high power builds that push the direct injection threshold, this lift kit overrides the typical N55 fueling bottleneck by overdriving the high pressure fuel pump mechanism.


Fuel-It! B58 BMW High Pressure Fuel Pump (HPFP) Upgrade - Stage 2 ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Fuel-It! - Corporate Logo
T#:13003684
Part#: BMWB58HPFPSTG2
Ships on Jul 21, 2026
$ 1,499.00 USD
Free Shipping on orders $49 and up
Introducing the new B58 BMW HPFP upgrade kit from Fuel-It! Replaces your factory high-pressure fuel pump with a higher capacity pump capable of supporting 30% more flow with Stage1 or 60% more flow with Stage2! Includes all required installation hardware for a clean plug and play install. Includes: Upgraded High-Pressure Fuel Pump (HPFP) Billet Adapter Plate Billet Center Alignment Tool Low-pressure Line (Triple lined crimped fittings PTFE/SS/Nylon Braided) Custom Harness and Hardware
Show More Show Less
Dorch Engineering PWG N55 38% Lift Kit – HPFP Upgrade - with $400 c...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Dorch Engineering - Corporate Logo
T#:55569526
Part#: DE-LK-1038-PWGKT
Ships on Aug 3, 2026
New Item
$ 1,799.00 USD
$ 1,799.00 USD
The factory N55 fueling system leaves a lot to be desired once you turn up the boost. Enter the Dorch Engineering HPFP Lift Kit. This kit is a calculated, high performance solution designed specifically for PWG N55 engines to extract maximum flow from your fueling setup by altering the mechanical lift profile of the pump drive
Show More Show Less
Hitachi Fuel Supply Module - BMW N20 N55 N26
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Hitachi - Corporate Logo
T#:48850079
Part#: 16117243975
Ships in 6 Business Days
New Item
$ 344.99 USD
Free Shipping on orders $49 and up
Delivers fuel from the tank to the engine.

Dorch Engineering Gen1 DS25 HPFP Upgrade - F Chassis - B58
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Dorch Engineering - Corporate Logo
T#:55461363
Part#: DE-581-25A
Special Order: No Guaranteed ETA
New Item
$ 1,799.00 USD
$ 1,799.00 USD
The Dorch Engineering DS25 HPFP Upgrade for the Gen 1 B58 engine is the definitive hardware upgrade for enthusiasts looking to safely extract maximum performance from their powerplants. Designed to eliminate the primary bottleneck in the B58 fueling system
Show More Show Less

BMW F-Series B58 / B48 - Engine Bay Location - Basic
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Bootmod3 - Corporate Logo
T#:54852022
Part#: BM3FKKFBX8
Ships in 10 Business Days
New Item
$ 499.00 USD
$ 499.00 USD
Fuel Tank Base
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Genuine BMW - Corporate Logo
T#:43975
Part#: 16111181918
Ships in 3 Business Days
$ 7.99 USD
Free Shipping on orders $49 and up


Genuine BMW Base - L=100Mm
This item fits the following BMW Chassis:
E36 M3,E39 M5,E46 M3,E36,E38,E39,E46,E93,F30,F31,F32,F33,F34,F36


Genuine BMW Fuel Injector Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Genuine BMW - Corporate Logo
T#:5175711
Part#: 13538625396KT
Ships in 3 Business Days
$ 2,375.99 USD
Free Shipping
$ 2,375.99 USD
Free Shipping
Genuine BMW O-ring - 13517528408
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Genuine BMW - Corporate Logo
T#:41853
Part#: 13517528408
Ships in 3 Business Days
6% off MSRP $ 16.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.99 USD
Free Shipping on orders $49 and up
6% off MSRP
$ 16.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.99 USD
Free Shipping on orders $49 and up

Genuine BMW High Pressure Fuel Pump with Fuel Filter - N55 - 135i, 33...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Genuine BMW - Corporate Logo
T#:199550
Part#: 13518604231
Ships in 6 Business Days
5% off MSRP $ 1,292.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,226.99 USD
Free Shipping
5% off MSRP
$ 1,292.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,226.99 USD
Free Shipping
This is the updated high pressure fuel pump for BMW's with the N55 turbo engine.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
3/2012-2013 E82 BMW 135i 135is
2014+ F22 BMW M235i M235i xDrive
2014+ F23 BMW M235i
3/2012-2013 E92 BMW 335i 335xi 335i xDrive - Coupe
3/2012-2013 E93 BMW 335i - Convertible
2012+ F30 BMW 335i 335i xDrive - Sedan
2013+ F32 BMW 435i 435i xDrive - Coupe
2013+ F33 BMW 435i Convertible 435i xDrive Convertible- Convertible
2014+ F34 BMW 335i xDrive GT - Gran Tourismo
2014+ F36 BMW 435i Gran Coupe 435i xDrive Gran Coupe
3/2012-+ F07 BMW 535i GT, 535i xDrive GT
3/2012-3/2012+ F10 BMW 535i 535i xDrive
3/2012+ F12 BMW 640i 640i xDrive
2013+ F06 BMW 640i Gran Coupe 640i xDrive Gran Coupe
3/2012-+ F01 BMW 740i 740li 740li xDrive
2013+ E84 BMW X1 xDrive35i
4/2012-2013 E70 BMW X5 xDrive35i
4/2012-2013 E71 BMW X6 xDrive35i br>2014+ F15 BMW X5 sDrive35i X5 xDrive35d X5 xDrive35i X5 xDrive50i
2015+ F16 BMW X6 sDrive35i X6 xDrive35i X6 xDrive50i
4/2012+ F25 BMW X3 xDrive28i X3 xDrive28d X3 xDrive35i
2015+ F26 BMW X4 xDrive28i X4 xDrive35i
Show More Show Less

Genuine BMW Closure Ring - Multiple BMWs
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Genuine BMW - Corporate Logo
T#:44344
Part#: 16117188565
Ships in 3 Business Days
6% off MSRP $ 24.88

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 23.41 USD
Free Shipping on orders $49 and up
6% off MSRP
$ 24.88

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 23.41 USD
Free Shipping on orders $49 and up
Fuel tank closure ring.
Genuine BMW Fuel Injector Replacement Kit - BMW B58 3.0L (Gen1 B58 / ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Genuine BMW - Corporate Logo
T#:50031892
Part#: B58AFIRKT
Ships in 3 Business Days
New Item
$ 2,274.99 USD
Free Shipping on orders $49 and up
$ 2,274.99 USD
Free Shipping on orders $49 and up
This Fuel Injector Replacement Kit includes new injectors and hardware to service your fuel injection system, eliminating rough idle, low power, and check engine lights due to faulty fuel injectors.
Genuine BMW Fuel Injector Replacement Kit - BMW B46/B48 2.0L (Gen1 B4...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Genuine BMW - Corporate Logo
T#:50031890
Part#: B48AFIRKT
Ships in 3 Business Days
New Item
$ 1,515.99 USD
Free Shipping on orders $49 and up
$ 1,515.99 USD
Free Shipping on orders $49 and up
This Fuel Injector Replacement Kit includes new injectors and hardware to service your fuel injection system, eliminating rough idle, low power, and check engine lights due to faulty fuel injectors.


AN 6 Fuel Lines With Ethanol Sensor Connections - F2x/F3x B58 ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Precision Raceworks - Corporate Logo
T#:11399222
Part#: 201-0214
Ships in 5 Business Days
$ 164.99 USD
Free Shipping on orders $49 and up
This is a better than OEM quality solution is direct plug and play replacement for the factory line to help you achieve the needs of your high horsepower build on E85.
Precision Raceworks Stage 2 Upgraded Fuel Injectors - Set Of 6 - BMW ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Precision Raceworks - Corporate Logo
T#:40004857
Part#: 201-0260
Ships in 5 Business Days
$ 1,599.00 USD
Free Shipping on orders $49 and up
The Precision Raceworks N55/S55 Upgraded DI Injectors are designed for customers looking to push the limits without port injection (or in addition to port injection). Our high flow injectors were developed in a partnership with NHP, taking advantage of resources offered by both companies to produce the highest quality and highest flowing direct injector upgrade ever for the N55 engine. These high flow injectors flow 55% over stock! Each injector is tested and calibrated using state of the art high pressure flow calibration equipment and then matched to a set of 6. Installation of these is a snap and is as simple as replacing your injectors, a little coding, and then checking a checkbox!
Show More Show Less
9.89mm Fuel Line Fitting AN6 PTFE To Male QC
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Precision Raceworks - Corporate Logo
T#:38094338
Part#: 201-0181
Ships in 5 Business Days
$ 18.99

This product was last offered at the strikethrough price on
01-22-2026

$ 17.99 USD
Free Shipping on orders $49 and up
$ 17.99 USD
Free Shipping on orders $49 and up
This fitting allows you to terminate an AN-6 PTFE fuel line with a secure, leak-free 9.89mm male quick-connect, making it an ideal solution for upgrading or modifying fuel delivery systems in high-horsepower, E85, and race-fuel applications.
Show More Show Less

Inline Fuel Filter AN8 Single In/Out - 6 Micron Filter
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Precision Raceworks - Corporate Logo
T#:38161700
Part#: 501-0115
In Stock
$ 178.99

This product was last offered at the strikethrough price on
01-22-2026

$ 169.99 USD
Free Shipping on orders $49 and up
$ 169.99 USD
Free Shipping on orders $49 and up

Inline Fuel Filter AN8 Single In/Out - Universal Fitment | Precision Raceworks is a high-performance fuel filtration solution designed for BMW and other high-performance applications. This inline fuel filter ensures superior filtration, protecting your engine from contaminants that can compromise fuel system performance.

Crafted from high-quality billet aluminum, the filter body is precision-machined for durability and reliability. Featuring AN8 female ORB fittings on each end, this universal-fitment filter integrates seamlessly into custom fuel setups, making it ideal for both street and track applications.

  • Precision-machined billet aluminum construction – Ensures strength, durability, and long-lasting performance
  • AN8 female ORB fittings – Compatible with a wide range of fuel system setups
  • High-flow filtration – Effectively removes contaminants to protect fuel injectors and engine components
  • Universal fitment – Ideal for custom fuel system configurations in BMW and other performance vehicles
  • Corrosion-resistant anodized finish – Provides excellent protection against fuel and environmental factors
  • Reliable and efficient fuel delivery – Supports high-performance and racing applications

Note: Mounting hardware is not included.

Ensure clean and efficient fuel delivery with the Inline Fuel Filter AN8 Single In/Out - Universal Fitment | Precision Raceworks, engineered for high-performance reliability.

Show More Show Less

PTFE AN6 Fitting To 7.89mm Male QC
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Precision Raceworks - Corporate Logo
T#:38094325
Part#: 201-0176
Ships in 5 Business Days
$ 15.99

This product was last offered at the strikethrough price on
01-22-2026

$ 14.99 USD
Free Shipping on orders $49 and up
$ 14.99 USD
Free Shipping on orders $49 and up
This setup involves a PTFE AN6 fitting that connects to a 7.89mm male quick-connect (QC) fitting, commonly used in fuel or fluid systems. The PTFE hose offers excellent durability, with resistance to chemicals, heat, and pressure. The AN6 fitting ensures a secure connection, while the 7.89mm male QC fitting allows for fast, tool-free connections and disconnections. When choosing this fitting, ensure it's compatible with both your PTFE hose and system. Need help finding the right components?
Show More Show Less
Black Market Parts Universal Fuel Pump Wiring Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Precision Raceworks - Corporate Logo
T#:38195421
Part#: 601-0054
Ships in 5 Business Days
$ 14.99 USD
Free Shipping on orders $49 and up
The Black Market Parts Universal Fuel Pump Wiring Kit is a one-stop shop solution for anyone looking to add an additional fuel pump to their fuel tank. This compact kit provides 6 inches of 100% E85 compliant 12 gauge wiring so you don't have to buy complete spools of wire just to get the little wire you need to extend the pump harness. The kit also includes all hardware for bulk head style pass-through for power used by pump manufacturers around the world. Full stainless bulk head power posts make it easy to add pass-through power to any fuel pump
Show More Show Less

Precision Raceworks Universal AN8 ORB To AN6 Male Flare Adapter ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Precision Raceworks - Corporate Logo
T#:38161738
Part#: 201-0331
In Stock
$ 15.99 USD
Free Shipping on orders $49 and up
Convert your AN-8 ORB port to an AN-6 Male flare fitting with Viton O-Ring *O-Ring on AN6 side is only utilized if threading into ORB port
DW400 Performance Fuel Pump Module - BMW F30 N55
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
DeatschWerks - Corporate Logo
T#:53997735
Part#: 9-421-7270
Ships in 6 Business Days
New Item
Sale - Save 10% $ 449.00

This product was last offered at the strikethrough price on
07-02-2026

$ 404.10 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 449.00

This product was last offered at the strikethrough price on
07-02-2026

$ 404.10 USD
Free Shipping on orders $49 and up
Offers seamless integration of the OE returnless fuel line design, delivering 300 LPH and retaining original plumbing and wiring connections.

Bosch Flow Matched EV14 Injectors - US CAR Connector (EV6) - 1300cc -...
NOT A DIRECT REPLACEMENT FOR FACTORY INJECTORS - For use with aftermarket port injectio...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Bosch - Corporate Logo
T#:47679243
Part#: 501-0116
Ships in 7 Business Days
$ 884.99 USD
Free Shipping on orders $49 and up
$ 884.99 USD
Free Shipping on orders $49 and up
The Black Market Parts Genuine Bosch Motorsports EV14 fuel injectors featuring USCAR (EV6) connector matched and packaged in a pack of 6 units. Direct plug-in for Motiv Reflex, AIC, and Nexsys Motorsports
Show More Show Less

BMS Gen 1 B58 BMW Aluminum Port Injection Manifold
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Burger Motorsports - Corporate Logo
T#:27171924
Part#: BMSB58G1-PRM
Ships in 8 Business Days
Starting at $ 3,158.00 USD
Starting at $ 3,158.00 USD
Add more fuel via port Injection while increasing airflow in your Gen 1 B58 Powered BMW When it comes to intake manifolds it doesn't get any better than this. The Burger Motorsports intake manifold replaces your weak factory plastic B58 manifold with a direct fit high flow high strength aluminum manifold. Features port injection bungs located on the top of the manifold for easy access and optimal injector spray pattern, and 1/8" expansion vacuum ports perfect for gauges, BOV references, or Hobbs switches. Includes high-quality o-rings and all required hardware. Your factory high-quality intercooler core slides right in. Available with required port injection hardware (calibrated injectors with plug-and-play fuel line), or ala-cart without the extra fueling hardware. The optional high-quality Bosch EV14 42mm fuel injectors are offered in 550cc, 750cc, and 950cc options. For most 700-800whp applications we suggest the 750cc injectors, while the 550cc injectors are suitable for applications below 700whp. This kit includes a FREE $99.00 Burger Motorsports B58 Phenolic Thermal Intake Manifold Spacer FEATURES AND BENEFITS Increased flow Integrated top mount port injection bungs Much stronger than stock Looks amazing under the hood Lightweight aluminum construction All factory connections Extra ports for a BOV, Hobb's switch, or boost gauge Includes upgraded high-temperature o-rings Optional Motiv Reflex + Injector Controller Optional Injector Block Off Plugs Optional Deasthwerks 1000cc Injectors
Show More Show Less
Pump Filter Sock
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Walbro - Corporate Logo
T#:38128034
Part#: 125-190
Ships in 6 Business Days
$ 15.99 USD
Free Shipping on orders $49 and up
Perfect for vehicle owners looking to maintain their vehicle’s fuel system integrity, this Walbro Pump Filter Sock replacement is a reliable upgrade for optimal driving performance.
90 Degree Fuel Line Fitting AN6 PTFE To AN6 Flare Female
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Precision Raceworks - Corporate Logo
T#:38094314
Part#: 201-0174
Ships in 9 Business Days
$ 20.99

This product was last offered at the strikethrough price on
01-22-2026

$ 19.99 USD
Free Shipping on orders $49 and up
$ 19.99 USD
Free Shipping on orders $49 and up
The AN-6 GTFE 90-Degree Fitting to AN-6 Female Flare is a premium-grade, precision-machined adapter crafted for effortless fuel system compatibility and optimal performance.


Precision Raceworks Universal AN8 Male ORB To AN6 Female ORB Adapter ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Precision Raceworks - Corporate Logo
T#:38161735
Part#: 201-0404
Ships in 4 Business Days
$ 7.99 USD
Free Shipping on orders $49 and up
Use this adapter to convert your AN8 fuel rail to AN6 female ORB with this helpful fitting!
9.89mm To 7.89mm Fuel Line Fitting 90 Degree Double Quick Connect ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Precision Raceworks - Corporate Logo
T#:38094341
Part#: 201-0182
Ships in 9 Business Days
$ 36.99

This product was last offered at the strikethrough price on
01-22-2026

$ 34.99 USD
Free Shipping on orders $49 and up
$ 34.99 USD
Free Shipping on orders $49 and up
Engineered for seamless fuel system integration, this precision-machined 90-degree fitting is designed with a 7.89mm female quick connect on one end and a 9.89mm female quick connect on the other. Built for maximum convenience, it features an air hose-style quick connect system, ensuring effortless, secure connections without the need for special tools.
Show More Show Less