BMW Intake Parts for BMW 4 Series F36 (2015+)

This Stage 2 cold air intake system produces 11 max horsepower, 15 lbs. x ft. torque and out-flowed the factory intake by 38%. This system includes a durable powder-coated heat shield and features a washable/reusable conical Pro 5R air filter for maximum flow. This air filter is constructed with 100% polyurethane, for long life and multiple cleaning cycles. A huge one-piece mandrel bent wrinkle-black powder-coated intake tube, maximizes air velocity providing maximum performance and throttle response. This is a direct bolt-on kit and requires no cutting or drilling.

It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred, where the original rubber diaphragm splits, which causes a loss of boost pressure. Unfortunately the failure doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure, so you may not be aware that you are losing power due to this.

Our alternative is a fully engineered solution offering significantly improved reliability. Our valve is piston based with no diaphragm to fail, and of all aluminium construction. It replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation.

Unique One-Piece High-Quality Housing w/ Auxiliary Inlet:
The smooth one-piece high quality sealed housing with auxiliary air inlet is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style. Unique Filter-to-Housing Interface. (US PAT 9440175)

Carbon Fiber Trim On Housing:
This Momentum GT intake system offers carbon fiber trim on the housing to give that motorsport appearance. This cover overlay is constructed of lightweight high gloss, clear-coated 2 x 2 twill-weave carbon fiber.

High-Quality Tube:
This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit.

Large 5-Layer Performance Air Filter:
The Momentum GT intake is designed around an oil-free, large 7-1/2" tall inverted top 360-degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. The unique air filter to housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process.

Premium Hardware:
Premium stainless steel clamp is used for strength while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.

Note:
This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.

The stock air box in many BMWs is the first point of restriction to air flow and power. The Evolution Intake from Injen is a great option for increased airflow and power, up to +15hp and +16ft/lbs of torque, while still retaining a clean look without being overly flashy like many other intakes on the market. Featuring CAD and 3D designed Roto-Molded Polyethylene (Heavy Duty Plastic) construction and a larger SuperNano-Web Dry Filter, this drop-in intake system offers a significantly higher air flow rate and easy installation with no modifications needed.

Product Features:

• Complete intake design, including the intake chargepipe,
• Designed To Work w/Stock Calibration
• Aggressive Intake Tone Under Acceleration
• Roto-Molded Polyethylene Tube And Housing
• Reinforced Automotive Grade Silicone Couplers
• Stainless Steel Band Clamp w/Inner Protective Liner
• Larger Inlet Air Scoop And Induction Tube
• Midnight Edition Injen Badge
• Made in the USA

Notice of Emissions Non-Compliance. This product is not legal for sale or use in California on any pollution-controlled motor vehicle.

BMW Cold Air Intake System delivers more cool air to your BMW's engine, enhancing performance and producing an aggressive yet refined turbo whistle. Designed for significant performance improvements and ease of use, this intake system offers a range of benefits.

• Dyno-Proven Gains: Increases power by up to +7 HP and torque by +14 Lbs. x Ft.
• Improved Airflow: Outflows the factory intake by 34% for better engine breathing.
• High-Performance Flow: Measures 605 CFM @ 7" H2O for efficient air delivery.
• Open-Element Design: Allows visibility of the large air filter while sealing when the hood is closed to prevent hot air ingress.
• Convenient Filter: Features a washable and reusable Pro DRY S air filter for easy maintenance.
• Easy Installation: Innovative filter-to-housing interface and minimal hardware ensure a quick and straightforward setup.

When modifying the car and increasing boost, installing an upgraded intercooler is essential to keep the engine computer from restraining boost as temperatures climb. The stock air-air intercooler is quickly overcome with heat and can't keep the intake air cool enough. If it's too hot the engine computer will reduce power to safer levels. This Dinan intercooler is a dual-core air-air design with an astounding 240% more surface area than the factory intercooler. The temperature at boost is 60% cooler at 6,250 RPM with the Dinan Dual Core compared to stock. Even heat soak at low speeds is reduced, making this a worthwhile addition even for stock or mildly tuned engines. Professional installation is strongly recommended as bumper removal is required and several pieces in the front end need to be cut and trimmed. The factory charge piping in and out of the intercooler is re-used.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. The intercooler is worth 2 points towards your Dinan badge.

Click here for full installation instructions, including fitment details. We strongly recommend reviewing these instructions prior to purchasing so you will be familiar with the small differences among models and front bumper designs.

This item fits the following BMWs:
2014+ F22 F23 BMW 228i 228iX M235i M235iX
2012-2015 F30 BMW 320i 328i 328i X-Drive 335i 335i X-Drive - Sedan
2012-2015 F31 BMW 328i X-Drive - Touring Wagon
2012-2016 F32 BMW 428i 428i X-Drive 435i 435i X-Drive - Coupe
2012-2015 F34 BMW 328i 328i X-Drive 335i 335i X-Drive - Gran Turismo
2012-2016 F36 BMW 428i 428i X-Drive 435i 435i X-Drive - GranCoupe

This is a short ram intake and filter kit that will go in place of the restrictive and unattractive factory airbox. Feel a dramatic boost to throttle response and build boost faster by eliminating restrictions and widening the intake track. The Injen SP Series Intake Systems Feature the Patent Pending MR Technology Process for Optimal Gains and a Safe A/F Ratio. The Injen SP Series Intake System does not limit itself to just a Cold Air System or Short Ram System. The MR Technology process has its effects on both types. The Injen SP Series Intake is The World's First Tuned Intake System.

In 1999 Injen designed the first urethane filter with a built-in velocity stack for added performance. The Injen Technology Research and Development Team calculates each filters mesh and pleat count for each specific application during the development stages. Today the state-of-the-art Ea nano-fiber Injen/AMSOIL performance dry filter provides reliable performance and requires NO OIL. Both Injen Air Filters allow cleaning and durability for 1000's of miles to come.

Features:
Powdercoated heat shield
Polished short ram tubing
+13hp/11ftlbs.

Kit Includes:
Short ram intake piping
Heat shield 
SuperNano Dry Web Dry Filters
Mounting hardware
Instuctions

This part fits the following BMWs:
2016 BMW M2 (F87) 
2014-2016 BMW M235I (F22) 
2012-2015 BMW 335I/IX (F30/31/34) 
2014-2016 BMW 435I/IX (F32/33/36) 

Perfect Fit:
Includes stainless steel clamps for a leak-free seal and heavy-duty 5-Ply reinforced silicone coupling for strength.

Mandrel-bent Tubing:
Constructed of 2-1/2" to 2-3/4" mandrel-bent aluminum tubing and powder-coated textured-red for heat and corrosion resistance. The smooth transition mandrel bends decrease turbulence which increases horsepower and torque. The high-temp wrinkle-black powder-coating insulates the tube from engine heat and protects the tube from corrosion.

aFe Badging:
Unique aluminum laser-cut aFe Power logo plate is welded-on for an aggressive style.

Also Fits:
2014-2016 BMW 128i/ix (F20/21) L4-2.0L (t) N20
2014-2016 BMW 228i/ix/220i (F22/23) 14-16 L4-2.0L (t) N20
2013-2016 BMW 320i/ix (F30/31/34) L4-2.0L (turbo) N20
2012-2016 BMW 328ix (F30) L4-2.0L (turbo) N20
2013-2016 BMW 328i/ix (F31/34) L4-2.0L (turbo) N20
2014-2016 BMW 420i/ix (F32/33) L4-2.0L (turbo) N20
2014-2016 BMW 428i/ix (F32/33/36) L4-2.0L (turbo) N20

Note: This intercooler tube is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicle.