BMW Suspension Parts for BMW F82 M4 S55 3.0L

BC Racing BR Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...

For vehicles with 5-Bolt Top Mounts & EDC Suspension

For vehicles with 5-Bolt Mounts and EDC

T#:555818

Part#: I-68-BR

Ships in 4 Business Days

$ 1,195.00 USD

Add to Wish List

Qty

$ 1,195.00 USD

Add to Wish List

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

Show More Show Less

F8X Ohlins X Turner Motorsport Street-Performance Coilover System ...

T#:8294107

Part#: BMU MW40S1

Ships on Aug 6, 2026

$ 3,977.99 USD

Add to Wish List

Qty

$ 3,977.99 USD

Add to Wish List

Turner Motorsport has teamed up with Ohlins to bring the ultimate street coilover to the F8X community. Working alongside the engineers at Ohlins, we have developed a special recipe derived from the standard Ohlins DFV Road and Track kit. This Street-Performance system includes modified spring rates and valving for a more streetable coilover experience. If you are looking to enjoy your S55 car to the fullest, but don't want to forgo any ride quality, these are the perfect option.

Show More Show Less

BC Racing BR Series Coilover Suspension Kit - 3-Bolt Top Mount - BMW ...

For 2014-2015 Models with 3-Bolt Front Strut Mounts and EDC Suspension

T#:555827

Part#: I-49-BR

In Stock

$ 1,195.00 USD

Add to Wish List

Qty

$ 1,195.00 USD

Add to Wish List

BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

Show More Show Less

BC Racing BR Series Extreme Low Coilover Suspension Kit - 5-Bolt Top ...

For vehicles with 5-Bolt Top Mounts & EDC Suspension

For vehicles with 5-Bolt Mounts and EDC

T#:568069

Part#: I-68E-BR

Ships on Sep 10, 2026

$ 1,345.00 USD

Add to Wish List

Qty

$ 1,345.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components.

Show More Show Less

BC Racing DS Series Coilover Suspension Kit - 3-Bolt Top Mount - BMW ...

For 2014-2015 Models with 3-Bolt Front Strut Mounts and EDC Suspension

T#:598295

Part#: I-49-DS

Back Ordered

$ 1,395.00 USD

Add to Wish List

Qty

$ 1,395.00 USD

Add to Wish List

The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort. Swift Springs are available upon request with your choice of rates and matched or custom valving.

Show More Show Less

BC Racing DS Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...

For vehicles with 5-Bolt Top Mounts & EDC Suspension

T#:598299

Part#: I-68-DS

Back Ordered

$ 1,395.00 USD

Add to Wish List

Qty

$ 1,395.00 USD

Add to Wish List

The DS series from BC racing offers increased control and feedback for those looking to achieve the best driving experience possible. Digressive Valving means the shock is firmer at low speed, while transitioning to a softer and more linear feel as (shaft) speed increases. This leads to a much more planted and controlled feeling in the chassis, increased feedback through the wheel, and a slight drop in passenger comfort. Swift Springs are available upon request with your choice of rates and matched or custom valving.

Show More Show Less

BR Series Coilover Suspension Kit With Swift Springs Upgrade ...

For vehicles with 5-Bolt Mounts and EDC*

T#:585960

Part#: I-68-BR-SW

Ships on Sep 10, 2026

$ 1,715.00 USD

Add to Wish List

Qty

$ 1,715.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop. To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months. This kit features mounts and brackets that are fully compatible with all stock mounting points and components. The upper shock/strut mounts are all constructed of 6061-T6 Aluminum for strength and weight savings. BC Racing design 1 of 3 types of upper mounts for each vehicle: Caster/Camber Plates (+/- 3* camber), Camber Plates (+/- 3* camber), and Rubber Mount Plates (NVH reduction). The included mount option for this kit is shown in the kit specs and features below. Lower shock mounts are powder coated for corrosion protection and constructed of either 6061-T6 aluminum that has been milled from a single piece (fork or bolt eye mount) or of STKM13C steel with all brackets welded robotically. The included springs come in one of 3 styles: linear, S-barrel, and V-barrel. Linear springs are used in most applications unless limited by the OE design that does not allow the use of linear springs. All spring options are made from SAE9254 steel and have a zinc coating applied under the powder coating for increased spring corrosion protection and long term reliability. All shock bodies used in the BR Series coilovers use a 53mm shock body (unless noted otherwise) for added strength, performance, and increased fluid capacity. All shocks are then powder coated black chrome for clean styling and corrosion protection. For vehicles with 5-Bolt mounts and EDC* (*Requires EDC Elimination kit. See T#405066) Specs and Features: 7k Front & 14k Rear Spring Rate Linear front & Linear rear springs Valved specifically to spring style and rate Camber Plate Front Mounts Aluminum and Rubber Rear Mounts Black Powder Coated Components All OE style brackets and mounting for perfect fit 30 Levels of Simultaneous Compression and Rebound Dampening 2 inch minimum and 3+ Inches of total potential drop Great for Track, Street, and any other conditions

Show More Show Less

BC Racing BR Series Extreme Low Coilover Kit - 3-Bolt Top Mount - BMW...

For 2014-2015 Models with 3-Bolt Front Strut Mounts and EDC Suspension

T#:568076

Part#: I-49E-BR

Ships on Sep 10, 2026

$ 1,345.00 USD

Add to Wish List

Qty

$ 1,345.00 USD

Add to Wish List

Looking for coilovers that will provide reliability on street driven vehicles but are also capable of feeding your weekend track demon's desire for performance? BC Racing's BR Series coilover kit may be just the thing for you. BR Series coilovers are the most popular and versatile option offered by BC racing, offering features such as 30-level dampening adjustment (simultaneous compression and rebound control), linear springs where possible, and a minimum of 2 inches ride height drop, up to 5". To ensure performance, comfort, and quality, all BR Series kits are Dyno tested during the design stage to determine the best valving and spring rates, then installed and tested for a minimum of 6 months.

Show More Show Less

BC Racing ER Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...

For vehicles with 5-Bolt Top Mounts & EDC Suspension

T#:4347105

Part#: I-68-ER

Back Ordered

$ 1,935.00 USD

Add to Wish List

Qty

$ 1,935.00 USD

Add to Wish List

The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS

Show More Show Less

BC Racing ER Series Coilover Suspension Kit - 3-Bolt Top Mount - BMW ...

For 2014-2015 Models with 3-Bolt Front Strut Mounts and EDC Suspension

T#:4347104

Part#: I-49-ER

Back Ordered

$ 1,935.00 USD

Add to Wish List

Qty

$ 1,935.00 USD

Add to Wish List

The ER Series coilovers bring with them the high quality and unique features seen on the BR and RM type but have the additional benefit of external reservoirs and the ability to allow the end user to individually adjust and set compression and rebound damping rates. By separating the adjustment for damping compression and rebound the ER Series allows you to dial the vehicle in to your exact needs. When braking hard whilst approaching a corner you want the car to transfer weight to the front tires to maximize grip for the braking effort and also to allow you to trail brake into the corner without the car understeering. Ride height adjustment: Ride height is determined by the position of the coil over bottom mount. The mount can be wound up and down the damper body to give a full range of adjustment. Because ride height is determined by an adjustable bottom mount rather than spring platform you retain full damper travel regardless of the ride height run. Know your protected from the elements! The damper units are black chromed steel to give superb durability even through the darkest of European winters. The aluminium components (top mounts, locking collars etc) are anodised and the steel lower mounts go through an electrophoretic disposition process followed by powder coating. A random selection of steel components (brackets, dampers, screws etc) are put through a salt spray test once a month to check the quality of the protective processes and that anti corrosive properties are kept at the highest possible standard. Features: Highly Customizable Mono-Tube Damper Linear Twin-Piston Design Height Adjustment Independent Of Spring Compression 30-Clicks Of Compression Adjustment Via The External Reservoirs 30-Clicks Of Rebound Adjustment From The Top Of The Damper Front And Rear Camber Plates Standard On All Applicable Kits Front And Rear Pillowball Mounts Standard When Camber Plates Do Not Apply Custom Spring Rates And Swift Spring Compatible Custom Valved To Match The Drivers Requested Spring Rates Swift Spring Upgrade Available On Most Applications 1-Year Warranty Against Manufacturers Defect Fully Rebuildable NOTE: LEAD TIMES ON ALL NEW ORDERS 4-8 WEEKS

Show More Show Less

BC Racing HM Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...

For vehicles with 5-Bolt Top Mounts & EDC Suspension

T#:47439396

Part#: I-68-HM

Back Ordered

$ 2,565.00 USD

Add to Wish List

Qty

$ 2,565.00 USD

Add to Wish List

The BC Racing HM Series Coilover System gets its great qualities from a combination of two previous BC Racing Coilover Systems - the RM Series and ER Series. The HM Series uses an inverted mono-tube damper, just like the RM Series, but adds the independent compression and rebound adjustment of the ER Series. Each HM Series Coilover System uses inverted mono-tube dampers front and rear on McPherson strut vehicles with steel braided lines leading from the top of the damper to the external reservoirs. The external reservoirs allow for a higher oil capacity with the added benefit of increased thermal dissipation, they also house the secondary damping piston. For Subarus and other McPherson suspension vehicles that are heavily tracked, the BC Racing HM Series Suspension System is definitely worth checking out!

Show More Show Less

BC Racing RM Series Coilover Suspension Kit - 5-Bolt Top Mounts - 201...

For vehicles with 5-Bolt Top Mounts & EDC Suspension

T#:47439395

Part#: I-68-RM

Back Ordered

$ 1,515.00 USD

Add to Wish List

Qty

$ 1,515.00 USD

Add to Wish List

The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The BC Racing RM Series Coilover System uses a much larger inverted piston shaft that can handle higher lateral loads for longer periods of time without fatigue. These higher lateral loads are only prevalent on McPherson style strut suspension, not on Double A-Arm vehicles.

Show More Show Less

BC Racing HM Series Coilover Suspension Kit - 3-Bolt Top Mount - BMW ...

For 2014-2015 Models with 3-Bolt Front Strut Mounts and EDC Suspension

T#:47439437

Part#: I-49-HM

Back Ordered

$ 2,565.00 USD

Add to Wish List

Qty

$ 2,565.00 USD

Add to Wish List

The BC Racing HM Series Coilover System gets its great qualities from a combination of two previous BC Racing Coilover Systems - the RM Series and ER Series. The HM Series uses an inverted mono-tube damper, just like the RM Series, but adds the independent compression and rebound adjustment of the ER Series. Each HM Series Coilover System uses inverted mono-tube dampers front and rear on McPherson strut vehicles with steel braided lines leading from the top of the damper to the external reservoirs. The external reservoirs allow for a higher oil capacity with the added benefit of increased thermal dissipation, they also house the secondary damping piston. For Subarus and other McPherson suspension vehicles that are heavily tracked, the BC Racing HM Series Suspension System is definitely worth checking out!

Show More Show Less

BC Racing RM Series Coilover Suspension Kit - 3-Bolt Top Mount - BMW ...

For 2014-2015 Models with 3-Bolt Front Strut Mounts and EDC Suspension

T#:47439436

Part#: I-49-RM

Back Ordered

$ 1,515.00 USD

Add to Wish List

Qty

$ 1,515.00 USD

Add to Wish List

The BC Racing RM Series Coilover System uses a mono-tube inverted damper in the front and rear of vehicles that use McPherson style OEM strut suspension. On vehicles that use front struts only, BC Racing provides an inverted front strut and then provides an upright BR Series damper for the rear. Inverted dampers are useful in decreasing unsprung weight by moving the greatest mass of the strut to the top where it connects to the sprung weight of the chassis, where weight can be more easily shaved. The BC Racing RM Series Coilover System uses a much larger inverted piston shaft that can handle higher lateral loads for longer periods of time without fatigue. These higher lateral loads are only prevalent on McPherson style strut suspension, not on Double A-Arm vehicles.

Show More Show Less

Turner Dual-Mount Differential Plate - With ECS Poly Diff Bushings - ...

T#:589795

Part#: 026773TMS03KT

In Stock

Sale - Save 25% $ 1,019.99

This product was last offered at the strikethrough price on
06-14-2026

$ 764.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 1,019.99

This product was last offered at the strikethrough price on
06-14-2026

$ 764.99 USD

Add to Wish List

Allows for the addition of a second rear-position differential bushing, and allows for a more enhanced driving experience by removing unwanted movement. Engineered by Turner to withstand extreme driveline forces. Featuring ECS Poly Diff Bushing kit for maximum performance & handling.

Show More Show Less

Turner Motorsport Thrust Arm Monoball Upgrade - Pre-installed Arms - ...

T#:401100

Part#: 023671TMS01-02

In Stock

Sale - Save 5% $ 840.99

This product was last offered at the strikethrough price on
06-14-2026

$ 798.94 USD

Add to Wish List

Qty

Sale - Save 5%

$ 840.99

This product was last offered at the strikethrough price on
06-14-2026

$ 798.94 USD

Add to Wish List

BMW’s are known to have failure prone front thrust arm bushings. The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change. This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience. Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure.

Show More Show Less

Turner Monoball Thrust Arm Bearing Set - F8x M2/M3/M4

T#:397172

Part#: 023671TMS01

In Stock

Sale - Save 20% $ 464.99

This product was last offered at the strikethrough price on
06-13-2026

$ 371.99 USD

Add to Wish List

Qty

Sale - Save 20%

$ 464.99

This product was last offered at the strikethrough price on
06-13-2026

$ 371.99 USD

Add to Wish List

BMW’s are known to have failure prone front thrust arm bushings. The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change. This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience. Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure.

Show More Show Less

Turner Performance Adjustable Front Lower Control Arms - F87 M2, F80 ...

T#:588022

Part#: 025990TMS03

In Stock

Sale - Save 3% $ 937.99

This product was last offered at the strikethrough price on
06-14-2026

$ 909.85 USD

Add to Wish List

Qty

Sale - Save 3%

$ 937.99

This product was last offered at the strikethrough price on
06-14-2026

$ 909.85 USD

Add to Wish List

Looking for upgraded lower control arms that don't limit adjustment capabilities like the OE control arms? These Turner Performance Lower Control Arms may be exactly what you need! These CNC'd billet aluminum control arms allow you to adjust roll center, camber, and track width easily and lock in your adjustments securely. The construction of these control arms allows for significant weight savings, reducing unsprung weight, while maintaining high levels of strength that is up to track use and abuse. Instead of using traditional jam nuts, these Turner Control Arms utilize a pinch bolt and rotating clamp design that allows high clamping forces to lock in track width and camper specifications without making it difficult to keep bearings properly aligned. Stainless steel spacers are included to enable roll center correction for lowered vehicles. To further improve control arm operation over the OE design, these control arms use FK rod ends and high misalignment solid spherical bushings to get rid of binding and flex. Features: Lightweight Aluminum, Titanium, Chromoly and Stainless Steel construction Correct ball joint angle for full articulation Clamp design allows for easy access to lock down your alignment settings Low friction 3-piece Teflon lined FK spherical bushings and Heim joints/rod ends Multiple size stainless steel roll center spacers for precise adjustment

Show More Show Less

BC Racing Rear Damping Adjustment Extenders - BR Type

T#:555864

Part#: DMP-EXT

In Stock

$ 39.99 USD

Add to Wish List

Qty

$ 39.99 USD

Add to Wish List

The rear damping adjuster on coilovers is usually hidden under a bunch of hard to reach interior panels requiring you to remove carpet, panels and sometimes even the rear seat back in order to adjust the dampening on your BC rear coilovers. The BC Racing rear extender adjuster allow you to make these adjustments without removing the rear interior. Simple make two small holes in the interior above the adjuster and the extension can be passed through the interior panels. Now the adjustments can be performed from above.

Show More Show Less

Performance Front Adjustable Swaybar End Link Set - F80 M3, F82/83 M4...

T#:588019

Part#: 025990TMS06

In Stock

$ 331.99

This product was last offered at the strikethrough price on
06-14-2026

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

When lowering your BMW without changing your swaybar end links, a significant amount of preload is applied to the swaybar. This can negatively affect the handling characteristics of your vehicle and cause unwanted stress on a number of other suspension components. Luckily, this can easily be remedied with our very own Turner Performance Adjustable Swaybar End Links! These adjustable end links are designed specifically for your lowered BMW, featuring heat-treated chromoly studs, Teflon lined 1/2" solid bearings with 65 degrees of articulation, CNC machined 6061 and 2024 aluminum shafts, and high-grade hardware for unparalleled performance and reliability. These end links are made 100% in America from American sourced parts and materials!

Show More Show Less

Turner Dual Mount Diff Plate - With Extra Rear Position ECS Poly Bush...

Polyurethane bushings are needed for this kit!

T#:589796

Part#: 026773TMS04KT

In Stock

Sale - Save 25% $ 588.99

This product was last offered at the strikethrough price on
06-14-2026

$ 441.74 USD

Add to Wish List

Qty

Sale - Save 25%

$ 588.99

This product was last offered at the strikethrough price on
06-14-2026

$ 441.74 USD

Add to Wish List

Turner Dual Mount Diff Plate with an Extra ECS Rear Poly Bushing for the second subframe diff mount. ONLY FOR USE WITH EXISTING INSTALLED POLY BUSHINGS!

Turner Monoball Rear Upper Control Arm Bushings - F8x M2, M2 Comp, M3...

T#:2104260

Part#: 006261LA01

In Stock

Sale - Save 10% $ 354.99

This product was last offered at the strikethrough price on
06-14-2026

$ 319.49 USD

Add to Wish List

Qty

Sale - Save 10%

$ 354.99

This product was last offered at the strikethrough price on
06-14-2026

$ 319.49 USD

Add to Wish List

BMW’s are known to have failure prone rear control arm bushings. The flexible rubber bushings, even those found in M performance models, allow significant movement of the rear wheels to maximize daily driving comfort, but also allow considerable alignment change. This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience. Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available! Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011). We wanted to offer F80, F82, F83, and F87 owners similar levels of handling precision and control for the track and street. The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise. We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting. The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment. What you get is superior steering precision, turn-in response, direct braking feedback, and better handling. In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered. We offer these control arms with the monoball bushings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms. Features: Bearing housing Precision CNC machined from 6061-T6 blue anodized aluminum Knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands. CNC machined 304ss ball joint sleeve inserts, providing a precision fit between the ball joint and the subframe. Bearing OEM BMW sealed and greased ball joint for exceptional durability and service life. Performance Nearly instantaneous, crisp steering and braking response. Maintenance free, long lasting performance. Improved road feel without undesirable NVH.

Show More Show Less

Turner Front Adjustable Camber Plates - Race - F8X M3 M4

For vehicles without EDC

T#:598700

Part#: 023429TMSKT2

In Stock

Sale - Save 20% $ 518.99

This product was last offered at the strikethrough price on
06-14-2026

Starting at $ 415.19 USD

Add to Wish List

Sale - Save 20%

$ 518.99

This product was last offered at the strikethrough price on
06-14-2026

Starting at $ 415.19 USD

Add to Wish List

One of the tricks for getting your F8x M3 or M4 to handle better is to add negative camber to the front wheels. This will put more of the tire's width in contact with the ground during cornering. With more rubber, there is more grip. BMWs typically have less camber in the front to create understeer, but if you're running a stock setup on the track or autocross, you are giving up speed and time as the front tires run out of grip sooner than they should. Designed in-house for the highest quality and longevity possible, we are confident our Race Camber Plates are the perfect solution for your F8X BMW M! These camber plates are fully compatible with OEM bump stops, factory style springs. and include all needed installation hardware!

Show More Show Less

Turner Motorsport Performance Rear Upper Control Arms - F8X M2 M3 M4 ...

T#:637367

Part#: 025990TMS012

In Stock

$ 1,062.99

This product was last offered at the strikethrough price on
05-03-2026

$ 899.99 USD

Add to Wish List

Qty

$ 899.99 USD

Add to Wish List

Eliminate sloppy handling with Turner's performance control arms!

Turner Adjustable Toe Arms w/ Eccentric Lockout Plates - F80, F82, G8...

T#:587754

Part#: 23672TMS03

In Stock

Starting at $ 432.99 USD

Add to Wish List

Starting at $ 432.99 USD

Add to Wish List

Eliminates any unwanted movement in the rear end associated with the the cumbersome factory eccentric toe adjustment point, opening up a wider range of adjustment for your alignment needs!

Turner Motorsport Performance Rear Sway Bar End Links - F8X M2 M3 M4 ...

T#:637368

Part#: 025990TMS011

In Stock

Sale - Save 3% $ 321.99

This product was last offered at the strikethrough price on
06-14-2026

$ 312.33 USD

Add to Wish List

Qty

Sale - Save 3%

$ 321.99

This product was last offered at the strikethrough price on
06-14-2026

$ 312.33 USD

Add to Wish List

Looking to get the most out of your swaybar? We suggest upgrading to our brand new Performance Rear End Links. Our new line of F8X rear end links feature length-adjustability for eliminating preload on sway bars, Teflon lined FK 1/2" bearings which prove higher load capacities than stock rubber bushings, and heat-treated Chromoly High Misalignment studs that offer extreme articulation, 65 degrees in total, to prevent binding.

Show More Show Less

Performance Adjustable Rear Traction Links - BMW F8X M2 M3 M4, G8X M3...

T#:5471050

Part#: 00501TMS08

In Stock

$ 512.99

This product was last offered at the strikethrough price on
05-03-2026

$ 421.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 512.99

This product was last offered at the strikethrough price on
05-03-2026

$ 421.99 USD

Limited Qty Sale

Add to Wish List

The stock Genuine BMW rear trailing arms (33322284534) are great for standard daily driving and occasional spirited driving, but they tend to fall flat on the track due to the soft rubber bushings causing excess deflection, creating undesirable handling characteristics, not to mention insufficient adjustability. Turner's new Performance Rear Traction Links increase stability and response by eliminating bushing deflection under hard acceleration and braking and help to reduce wheel hop on hard launches. Thanks to their adjustable design, these allow fine tuning of rear bumpsteer and anti-squat characteristics. These arms are designed for use in high-performance street and race vehicles. These traction links feature gun drilled 2024 Aluminum center links, clamps, and clevises, along with a 360-degree rotating clamp system. This combination provides superior strength, performance, durability, and ease of adjustment. No annoying jam nuts! A simple 3/16" Allen-key is all that is required to lock down your alignment settings. FK Spherical Rod Ends are utilized to reduce alignment change in the rear suspension under hard cornering, acceleration, and braking. They feature a Teflon liner to provide quiet operation, low friction, smooth articulation, and eliminate bushing deflection under load. The PTFE liner is chemically bonded to the inner diameter of the race, offering a very high load carrying capacity and greatly increased dynamic wear characteristics. Rear Traction Links Features: Gun drilled 2024 Aluminum Links to reduce unsprung weight 6061-T6 Aluminum Rotating Clamp design Low friction 3-piece Teflon lined FK Heim joints/Rod Ends Sold as a pair Made in the USA

Show More Show Less

Emmanuele Design Lowering Spring Set - F82 F83 M4

T#:568357

Part#: EMD-F82-LS

Ships in 1 Business Day

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

Using a linear design (similar to OEM) with unique spring rates, Emmanuele Design's lowering springs are properly matched to the factory dampers, ensuring a ride quality that is slightly stiffer than stock, but predictable in nature. A progressive spring will typically be softer at light loads, then dramatically stiffen as compression increases. This makes it very hard to match dampening, and creates the bouncy feeling over light bumps. The linear design of these springs have a consistent rate as the spring sees higher load. On light bumps, it will allow the chassis to follow the road well (minimizing the bouncy feeling), while under heavy compression it will stiffen to prevent bottoming out. In our experience, this creates a much better overall ride quality. Compatible with adaptive suspension.

Show More Show Less

Performance Adjustable Rear Toe Links - BMW F8X M2 M3 M4, G8X M3 M4 B...

T#:5471051

Part#: 00501TMS09

In Stock

Sale - Save 5% $ 523.99

This product was last offered at the strikethrough price on
06-14-2026

$ 497.79 USD

Add to Wish List

Qty

Sale - Save 5%

$ 523.99

This product was last offered at the strikethrough price on
06-14-2026

$ 497.79 USD

Add to Wish List

The stock Genuine BMW rear toe links (33322284534) are great for standard daily driving and occasional spirited driving, but they tend to fall flat on the track due to the soft rubber bushings causing excess deflection, creating undesirable handling characteristics, not to mention insufficient adjustability. Turner's new Performance Rear Toe Links increase stability and response by eliminating bushing deflection while providing an increased range of rear toe adjustment, necessary for lowered cars or for performance alignments. Even small changes to ride height and camber will effect toe settings, and the wide range of adjustment allows you to maximize grip on a track car and extend tire life on a street car. The factory rear toe arms utilize an eccentric bolt and washer for adjustment and lack precision and range. These toe links feature gun drilled 2024 Aluminum center links, clamps, and clevises, along with a 360-degree rotating clamp system. This combination provides superior strength, performance, durability, and ease of adjustment. No annoying jam nuts! A simple 3/16" Allen-key is all that is required to lock down your alignment settings. Best if tightened to 73.7 ft. lbs. (100 N/M). DO NOT OVERTORQUE! ECS is not liable for any issues due to overtorque. FK Spherical Rod Ends are utilized to reduce alignment change in the rear suspension under hard cornering, acceleration, and braking. They feature a Teflon liner to provide quiet operation, low friction, smooth articulation, and eliminate bushing deflection under load. The PTFE liner is chemically bonded to the inner diameter of the race, offering a very high load carrying capacity and greatly increased dynamic wear characteristics. Rear Traction Links Features: Gun drilled 2024 Aluminum Links to reduce unsprung weight 6061-T6 Aluminum Rotating Clamp design Low friction 3-piece Teflon lined FK Heim joints/Rod Ends Sold as a pair Made in the USA

Show More Show Less

2-Piece Rear Subframe Bushing - Rear Position (95A) - F8x, G8x ...

T#:53326250

Part#: 056755LAKT

In Stock

$ 104.98

This product was last offered at the strikethrough price on
05-07-2026

$ 100.98 USD

Add to Wish List

Qty

$ 100.98 USD

Add to Wish List

Enhance rear-end control and put more power to the ground with a straightforward 3-piece design that installs with ease. The factory rubber may favor ride comfort, but it struggles to keep up when driving gets aggressive. As it wears, the OEM bushing can soften and deform, reducing stability and allowing wheel hop to creep in when you need traction most.

Our 95A durometer polyurethane bushings solve that problem. Engineered to strike the perfect balance between soft factory rubber and harsh solid mounts, they significantly reduce differential movement without introducing excessive vibration. The result is more efficient power transfer, so your torque goes straight to the rear wheels instead of being lost in drivetrain flex.

Features & Benefits:

Minimizes differential movement and instability to help eliminate wheel hop
Two-piece 95A split polyurethane design for easier installation
Precision-fit insert reinforces the bushing and strengthens mounting points
Resistant to road salt, oils, and harsh chemicals
Compatible with dual mount differential plates
Design:

Type II Anodized 6061-T6 CNC billet aluminum inserts for superior corrosion resistance and durability.
95A Polyurethane 2-Piece Isolator.
Product Development:

Our Rear Differential Bushings are designed, engineered, tested, and quality inspected by our Research & Development team. Our development process includes leading-edge product technology: FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

Show More Show Less

Adjustable Rear Upper/Inner Camber Bushings

T#:600206

Part#: 193926-3H

Ships on Aug 17, 2026

$ 320.00 USD

Add to Wish List

Qty

$ 320.00 USD

Add to Wish List

Nearly every car manufactured in the modern era carries a dark secret – fully-adjustable suspension has been all but eliminated in the name of cost-cutting and assembly-line efficiency. What this means for you is increased tire wear and more frequent replacement, as a “full alignment” consists only of rudimentary toe-angle adjustment. For over forty years, K-MAC has been hard at work developing a solution to this problem with patented innovations in camber/caster plates and bushing kits, allowing easy adjustment and a true “full four-wheel alignment” to be performed by any competent shop. These bushings make camber adjustments possible for the first time, and improve the ability to complete toe angle adjustments. When used in conjunction with the K-MAC Camber and Toe kit and Rear Adjustable Trailing Arms allows full adjustability of the 5 multi-link rear arms and positive location. Bolt-on installation – insertion/extraction tube included! Easily adjusted on the car with basic hand tools Unique failsafe locking hardware – set & forget! High quality elastomer compound resists binding Hardened & nickel-chrome plated centers for maximum bushing life 2x the load area of stock bushings Spiral grease grooves

Show More Show Less

Turner BMW Dual Mount Diff Plate - With Extra Rear Position OE Bushin...

T#:589799

Part#: 26773TMS05KT

In Stock

Sale - Save 25% $ 624.99

This product was last offered at the strikethrough price on
06-14-2026

$ 468.74 USD

Add to Wish List

Qty

Sale - Save 25%

$ 624.99

This product was last offered at the strikethrough price on
06-14-2026

$ 468.74 USD

Add to Wish List

Hotchkis Front & Rear Performance Sway Bar Kit With Turner Motorsport...

T#:4154557

Part#: 22842KTKT

In Stock

$ 1,303.99

This product was last offered at the strikethrough price on
07-09-2026

$ 1,271.99 USD

Add to Wish List

Qty

$ 1,271.99 USD

Add to Wish List

Hotchkis Front and Rear Sway Bars with Turner Motorsport Front and Rear Sway Bar End Links

BMW F8X M3 M3 M4 Rear Suspension Link Kit

Call In Or Chat For Best Price!
Call In, Chat, Or Email, For Best Price! Limited Time Only!

T#:554937

Part#: D280-0015

Ships in 5 Business Days

11% off MSRP $ 1,181.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,049.99 USD

Add to Wish List

Qty

11% off MSRP

$ 1,181.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,049.99 USD

Add to Wish List

BMW F8X M3 M4 Rear Suspension Link Kit is designed to enhance the handling and stability of your high-performance BMW. This kit eliminates the vagueness and flex commonly associated with stock rear suspension links, which rely on rubber bushings that can flex under load. By replacing these with Teflon-coated, machined steel rod ends and billet aluminum rods, this kit ensures a more planted and secure feel, especially during hard acceleration, braking, and cornering. The rods feature a hex design for easy adjustments, making it an ideal upgrade for those running larger wheels and tires.

Improved Stability: Eliminates flex under acceleration, braking, and cornering for a more secure feel.
High-Quality Materials: Teflon-coated, machined steel rod ends and billet aluminum rods.
Adjustable Design: Hex machined center rods for easy adjustment.
Enhanced Handling: Reduces vagueness and provides a more planted driving experience.
Ideal for Upgrades: Recommended for use with larger wheels and tires.
Turner Motorsport Quality: Trusted performance parts backed by over 35 years of BMW tuning expertise.

Show More Show Less

F80, F82, F83, F87 Dinan Monoball Front Thrust Arm Bushings (Pair) ...

Call In Or Chat For Best Price!

T#:396651

Part#: D280-0017

Ships in 5 Business Days

11% off MSRP $ 598.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 531.99 USD

Add to Wish List

Qty

11% off MSRP

$ 598.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 531.99 USD

Add to Wish List

For someone looking for superior performance and longevity these sealed monoball bushings are the best upper thrust bearing you can buy for an E82 1-series or E9X 3-series. The advantage of a monoball bearing is that it will not deflect under load. All of the rubber bushings move in all sorts of directions and that changes your alignment, especially when used with big brake kits or when driven hard. The condition worsens as the bushing wears out. The Dinan monoball sits in a CNC machined aluminum housing which has zero deflection. The monoball allows complete freedom of movement but only at the desired angles. What you get is superior steering precision, better handling from more consistent alignment, and almost infinite bushing life. And thanks to the inner liner and sealed rubber boots there's none of the extra noise or reduced service life of fully solid race bushings.

Show More Show Less

Turner Motorsport Control Arm Monoball Upgrade Kit

T#:2528148

Part#: 006261LA09

In Stock at Vendor

Sale - Save 3% $ 2,028.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,968.12 USD

Add to Wish List

Qty

Sale - Save 3%

$ 2,028.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,968.12 USD

Add to Wish List

BMW’s are known to have failure prone rear control arm bushings. The flexible rubber bushings, even those found in M performance models, allow significant movement of the rear wheels to maximize daily driving comfort, but also allow considerable alignment change. This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience. Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available! Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011). We wanted to offer F80, F82, F83, and F87 owners similar levels of handling precision and control for the track and street. The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise. We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting. The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment. What you get is superior steering precision, turn-in response, direct braking feedback, and better handling. In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered. We offer these control arms with the monoball bushings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms. Features: Bearing housing Precision CNC machined from 6061-T6 blue anodized aluminum Knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands. CNC machined 304ss ball joint sleeve inserts, providing a precision fit between the ball joint and the subframe. Bearing OEM BMW sealed and greased ball joint for exceptional durability and service life. Performance Nearly instantaneous, crisp steering and braking response. Maintenance free, long lasting performance. Improved road feel without undesirable NVH.

Show More Show Less

F87 M2, F8X M3/M4 Dinan Tubular Adjustable Sway Bar Set

Call In Or Chat For Best Price!

T#:389134

Part#: D120-0605

Ships in 5 Business Days

11% off MSRP $ 1,068.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 949.99 USD

Add to Wish List

Qty

11% off MSRP

$ 1,068.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 949.99 USD

Add to Wish List

Dinan sway bars are carefully engineered to match the driving dynamics of each BMW chassis. Dinan's research and development finds the ideal balance between improved handling while maintaining a comfortable ride. This set has been fine-tuned for the F8X M3/M4 and F87 M2 chassis to reduce bodyroll, improve steering and turn-in response, and reduce understeer. The front and rear bars are hollow tubular steel for light weight with adjustable ends to dial in the handling characteristics. These are the same sway bars used in Dinan's Stage 1 suspension and work best with Dinan shocks and springs or a similar sport suspension.

Show More Show Less

Adjustable Rear Upper/Inner Camber Bushings - BMW F22/23 F3X ...

T#:16474811

Part#: 193926-9G

Special Order: No Guaranteed ETA

$ 320.00 USD

Add to Wish List

Qty

$ 320.00 USD

Add to Wish List

Nearly every car manufactured in the modern era carries a dark secret – fully-adjustable suspension has been all but eliminated in the name of cost-cutting and assembly-line efficiency. What this means for you is increased tire wear and more frequent replacement, as a “full alignment” consists only of rudimentary toe-angle adjustment. For over forty years, K-MAC has been hard at work developing a solution to this problem with patented innovations in camber/caster plates and bushing kits, allowing easy adjustment and a true “full four-wheel alignment” to be performed by any competent shop. These bushings make camber adjustments possible for the first time, and improve the ability to complete toe angle adjustments. When used in conjunction with the K-MAC Camber and Toe kit and Rear Adjustable Trailing Arms allows full adjustability of the 5 multi-link rear arms and positive location. Bolt-on installation – insertion/extraction tube included! Easily adjusted on the car with basic hand tools Unique failsafe locking hardware – set & forget! High quality elastomer compound resists binding Hardened & nickel-chrome plated centers for maximum bushing life 2x the load area of stock bushings Spiral grease grooves

Show More Show Less

KMAC Stage 2 Street/Tack Front Adjustable Camber/Caster Plates - F80 ...

T#:389648

Part#: 192716-2P

Special Order: No Guaranteed ETA

$ 795.00 USD

Add to Wish List

Qty

$ 795.00 USD

Add to Wish List

KMAC camber/caster plates use a patented adjustment method designed for easy and rapid alignment adjustments. The KMAC design has a 'floating' inner camber plate, rather than slotted, to allow camber and caster to be adjusted together. To adjust, simply loosen the top three nuts on the strut tower and position the KMAC mount to match your desired alignment settings. The KMAC design allows more camber and caster adjustment because separate caster hardware is eliminated. While primarily designed to increase negative camber for track use these can also be used to fix alignment issues that cause uneven tire wear or unwanted handling behavior.

Show More Show Less

IRP Performance Rear Lower Control Arm Bushing - Inner - 8x, E9x, F87...

The lowest arm housing the coil spring

T#:2408498

Part#: IRPRSB-9XMB2

Special Order: No Guaranteed ETA

$ 176.99 USD

Add to Wish List

Qty

$ 176.99 USD

Add to Wish List

Enhance road feel and keep your vehicle more planted with these upgraded aluminum bushings. Less play allows for more precise suspension articulation, making for a better performance driving experience.

Show More Show Less

IRP Rear Adjustable Lower Control Arms

T#:2423536

Part#: IRPLCA-FXMR

Ships on Sep 25, 2026

Starting at $ 349.00 USD

Add to Wish List

Starting at $ 349.00 USD

Add to Wish List

Featuring Fluro Bearings

Upper Spring Hats/Perches (Pair) - 2.25 Inch / 16mm Pin / Tapered Sea...

T#:340476

Part#: TSU9980548

Ships on Nov 30, 2026

Sale - Save 25% $ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD

Add to Wish List

Sale - Save 25%

$ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD

Add to Wish List

These aluminum upper spring hats are for coil over struts with a 2.25" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

Show More Show Less

Upper Spring Hats/Perches (Pair) - 2.25 Inch / 16mm Pin / Square Seat...

T#:340477

Part#: TSU998062A

Ships on Nov 30, 2026

Sale - Save 25% $ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD

Add to Wish List

Sale - Save 25%

$ 132.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 99.74 USD

Add to Wish List

These aluminum upper spring hats are for coil over struts with a 2.25" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

Show More Show Less

Rod End Boot (14-18mm) - Priced Each

T#:599632

Part#: RERS3

In Stock

Sale - Save 43% $ 27.99

This product was last offered at the strikethrough price on
03-27-2026

$ 16.00 USD

Add to Wish List

Qty

Sale - Save 43%

$ 27.99

This product was last offered at the strikethrough price on
03-27-2026

$ 16.00 USD

Add to Wish List

Extend the life of your heim joints with this flexible rubber protective boot. Designed to fit 14mm–18mm spherical bearings and rod ends, it shields critical components from dirt, moisture, and road debris. Keeping contaminants out helps ensure consistent performance and reduces wear over time.

Show More Show Less

ASP Series Height Adjustable Spring Kit - BMW F80 M3, F82 M4 (RWD) ...

T#:52621851

Part#: 131BW001N1

Ships in 5 Business Days

$ 815.00 USD

Add to Wish List

Qty

$ 815.00 USD

Add to Wish List

BC Racing’s new adjustable spring perch (ASP) is an excellent solution for customers seeking a lowered stance, but still require the OEM electronic damping system to remain functional. Compared with conventional lowering springs, the BC Racing ASP offers ride height adjustability that seamlessly allows users more flexibility to tailor their chassis to the needs of modern suspension, performance, and style.

Show More Show Less

ASP Series Height Adjustable Spring & Camber Plate Kit - BMW F80 M3, ...

For vehicles with 5-Bolt front strut mounts

T#:52621850

Part#: 131BW001C1

Ships in 5 Business Days

$ 1,115.00 USD

Add to Wish List

Qty

$ 1,115.00 USD

Add to Wish List

BC Racing’s new adjustable spring perch (ASP) is an excellent solution for customers seeking a lowered stance, but still require the OEM electronic damping system to remain functional. Compared with conventional lowering springs, the BC Racing ASP offers ride height adjustability that seamlessly allows users more flexibility to tailor their chassis to the needs of modern suspension, performance, and style.

Show More Show Less

ASP Series Height Adjustable Spring & Camber Plate Kit - BMW F80 M3, ...

For vehicles with 3-Bolt front strut mounts

T#:52621845

Part#: 131BW001C2

Ships in 5 Business Days

$ 1,115.00 USD

Add to Wish List

Qty

$ 1,115.00 USD

Add to Wish List

BC Racing’s new adjustable spring perch (ASP) is an excellent solution for customers seeking a lowered stance, but still require the OEM electronic damping system to remain functional. Compared with conventional lowering springs, the BC Racing ASP offers ride height adjustability that seamlessly allows users more flexibility to tailor their chassis to the needs of modern suspension, performance, and style.

Show More Show Less

IRP Aluminum Rear Lower Camber Arms - Gold Finish - F87 M2, F8X M3 M4...

T#:4469705

Part#: IRPLCA-FXMAL

Special Order: No Guaranteed ETA

$ 518.99 USD

Add to Wish List

Qty

$ 518.99 USD

Add to Wish List

Looking to convert your M-car to a true coilover suspension in the rear? Then you'll want these camber arms! These control/camber arms replace the standard rear control arms that normally work with the barrel springs, eliminating a ton of extra weight and cleaning up the rear suspension. The simple design of these camber arms also allows for more room to work and increased clearance, setting you up perfectly for your rear coilover conversion! *Does not fit with original springs – coilovers must be used to install these arms!

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Suspension Parts for BMW F82 M4 S55 3.0L

Sub-Categories

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results