BMW Engine Parts for BMW F82 M4 S55 3.0L

Introducing our Turner Motorsport Crank Seal Guard – the essential shield for your BMW's engine integrity. Safeguarding the heart of your vehicle, this meticulously designed guard offers robust protection for the crank seal concealed behind the harmonic balancer.

Considered an indispensable maintenance component for your BMW, the Crank Seal Guard acts as a crucial defense against a potential and preventable catastrophe involving your accessory belt. Facing the reality of potential oil or coolant leaks in your engine, this guard becomes a reliable barrier, preventing these fluids from reaching the accessory belt. The consequence of a compromised belt includes walking, slipping, fraying, and rubber particles finding their way behind the harmonic balancer and into the crank seal – a scenario that can lead to severe engine failure.

Let's be honest, engine leaks are a common occurrence, and whether your engine is currently leaking or not, the Crank Seal Guard is a proactive measure against future threats. The wear and tear on the accessory belt due to oil and coolant exposure can result in slipping, tearing, or, worst-case scenario, belt snapping – posing a significant risk to your engine's well-being.

Prepare your car for the long haul and protect the vital components, It's not a matter of "if" but "when" your belt will become a problem, and our Crank Seal Guard is your proactive solution. Rigorously tested on N52/N54/N55 and S55 for 100% confirmed fitment, it stands as a reliable guardian for your engine's health. Invest in the protection your BMW deserves with the Turner Motorsport Crank Seal Guard.

Key benefits:

Protect crank seal from rogue accessory belts and their shredded debris
Optimized to fit N52, N54, N55, and S55 engines
Rigid design that fits within the space constraints between the engine block and harmonic balancer
Zinc-coated fasteners for corrosion and oxidation resistance
Design:

Modeled and designed from FARO laser scanning and Solidworks CAD
Manufactured from 6061 billet aluminum
Turner blue anodizing
Installation:

It is a good idea to note how your belt is routed before starting the installation.

2 securing bolts for crank seal guard - Torque value of 20Nm

You will find either 6 or 8 E10 bolts are holding the harmonic balancer depending on the engine.

E10 (P#11237564511) ​
​N52: 6 bolts - Torque value of 25nm
N54: 6 bolts - Torque value of 35nm
N55: 8 bolts - Torque value of 35nm

E10 (P#11237575488)
S55: 8 Bolts - Torque value of 35nm

Whether your S55-equipped BMW serves as a daily driver or track car, keeping temperatures cool is critical. While most enthusiasts focus on upgrading the radiator and water-to-air intercooler systems, the engine oil cooler is an overlooked yet critical component.

New for the F8X-generation M2, M3, and M4 is a low-slung, horizontally mounted oil cooler designed to harness underbody aerodynamics. By placing the cooler in a low-pressure zone, this design enhances airflow efficiency and achieves sustainable oil temperatures for stock and street-driven cars. However, the compact core is quickly overwhelmed on modified or track-driven vehicles. Its exposed mounting position also leaves it highly susceptible to impact damage, so a minor scrape or piece of road debris can mean a costly full replacement. If you’re already replacing your oil cooler, it’s the perfect time to upgrade!

Our engineering team set out to solve the shortcomings of the factory design by developing a larger, higher-capacity core that delivers measurable gains in thermal stability. With a 7% increase in core thickness over OEM, this upgraded unit enhances airflow through the cooler and helps maintain lower, more consistent oil temperatures under sustained load. Thanks to its robust bar-and-plate core, precision-formed sheet metal end tanks, and durable 5052 aluminum construction, it’s built to withstand the harsh realities of real-world performance driving.

Replaces OEM part numbers 17212284540 and 17214802333.

Features:

High-efficiency bar-and-plate core for superior heat dissipation Fully TIG-welded 5052 aluminum end tanks Retains OEM rubber mounting for vibration-isolated, factory-style fitment Black painted finish with laser-etched Turner logo Designed as a direct-fit replacement and upgrade for S55-equipped F8X vehicles Design:

7% thicker core (30mm vs 28mm) for increased thermal capacity 6.5% increase in finned area (104,000 mm² vs 97,650 mm²) for better cooling Compatible with the Turner Motorsport skid plate kit (ES#3448772, ES#3247792) for complete protection Product Development:

Our High Performance Aluminum Heat Exchanger was designed, engineered, tested, and quality inspected by our Research and Development team in our Wadsworth, Ohio, facility. We strive for the highest level of precision and quality through leading-edge product development technology, including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

Increase drivetrain rigidity and put that power to the ground! This industry-leading encapsulated design reduces NVH and prevents heat transfer.

From the factory, all BMW models are equipped with soft rubber or fluid-filled engine mounts. While these mounts perform well at isolating drivetrain vibrations, they are prone to degradation and allow for significant drivetrain movement. This often results in a loose-feeling driveline, missed shifts, and a generally disconnected driving feel.

To address these issues, We have developed a performance alternative. Constructed from 6061 Billet Aluminum, these mounts are built to last. While most performance drivetrain mounts feature solid or polyurethane-bonded aluminum construction, the engineers at Turner designed a unique four-piece design that disburses NVH (noise, vibration, and harshness). This multi-piece design offers the added benefit of serviceability. Additionally, encapsulating the polyurethane and adding a TecaPeek isolator prevents heat transfer to the insert, increasing the lifespan and durability of the mount.

Features & Benefits:

High-strength 6061 billet aluminum construction
80A Polyurethane provides a considerable increase over stock rubber durometer, eliminating excess deflection and ensuring drivetrain stiffness.
Instead of the typical polyurethane-bonded aluminum construction, this mount is encapsulated to reduce NVH (noise, vibration, and harshness).
Finished in black hard-coat anodized for a clean, durable, and corrosion-resistant finish.
TecaPeek isolator reduces heat transfer from the engine to the mount insert, increasing the lifespan of the mount.
A simple bolt-on design makes for an easy install
Replace your worn-out factory engine mounts and experience increased drivetrain rigidity, reduced deflection, and more precise shifting. Our Turner Performance Polyurethane Engine Mount Set is designed for maximum durability and strength while maintaining the perfect balance between stiffness and comfort—the perfect choice for your high-horsepower BMW!

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain hole can be used with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

Features:

• 6061-T6 billet machined body, anodized black for lasting protection and appearance
• Strategically positioned 4 chamber baffle system maximizes oil / air separation 
• Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
• Sealed with a pre-installed viton O-Ring
• Includes 2.5mm allen key to remove baffle plates for cleaning
• Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
• Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
• Optional use drain hole (valve and hose sold separately, watch for our model specific drain kits!)

Oil leaks from the valve cover are a common issue on high-mileage S55 engines and should be addressed before they lead to bigger problems. Repeated heat cycles can cause the original plastic valve cover and gasket to warp, crack, or lose their seal over time. This Bremmen aluminum valve cover for the BMW S55 engine is a premium upgraded replacement, engineered for superior strength and longevity. Featuring a durable aluminum housing and an integrated PCV system, it offers a reliable, direct-fit solution to replace the factory valve cover and restore proper engine sealing.

Features pre-installed valve cover gasket and integrated PCV. Without oil cap!

BMW N20 N52 N55 Timing Chain addresses the common issue of timing chain stretch and rattling over time. Although BMW designates the timing chain as a lifetime part, many enthusiasts choose to replace it preemptively. Turner Motorsport offers this direct-fit replacement for those needing to replace a worn or damaged timing chain without opting for a full kit.

• Direct Fit Replacement: Perfect for replacing a stretched or broken timing chain.
• High-Quality Construction: Ensures durability and reliability in maintaining engine timing.
• Ease of Installation: Designed to fit precisely without requiring additional modifications.
• Ideal for Maintenance: A practical choice for enthusiasts who prefer to change the timing chain independently of a full kit.

This eccentric shaft is a vital component of your BMW's N55 Valvetronic system, responsible for precise control of valve lift. In the N55 engine, the Valvetronic system uses intermediate levers between the camshaft and lifters to adjust valve lift dynamically. These levers are actuated by this eccentric shaft, which is rotated by an electronically controlled motor under the direction of the engine computer.

Eccentric shaft failure is a common issue in N55 engines, often caused by inadequate lubrication due to extended oil change intervals. The most frequent failure occurs when the eccentric shaft gear wears down, leading to disengagement from the motor's worm drive. Symptoms include multiple fault codes, such as P1014 (Shaft Parity Error), P1017 (Shaft Sensor Plausibility), P1023 (Valvetronic Adjustment Range), and P10E1 (Valvetronic System No Travel Detected).

If your BMW is experiencing Valvetronic-related fault codes, a failing eccentric shaft could be the source of the problem. Opt for this premium direct replacement from Bremmen Parts to restore your Valvetronic system's functionality and ensure a durable, high-quality repair.

The impulse sending wheel, located on both the intake and exhaust camshaft adjustment units, provides critical timing data to the camshaft position sensor, keeping your VANOS system synchronized. A worn or malfunctioning impulse sender can cause a myriad of performance issues, including hard starts and rough idle.

Whether you are performing a proactive timing system overhaul or addressing a component failure, Bremmen Parts offers a high-quality replacement designed for a precise fit and long-term durability.