BMW Exhaust Parts, Mufflers & Catalytic Converters for BMW F82 M4 S55 3.0L

Clear BMW chassis

Please ensure your correct model is selected

Performance exhaust options from the best BMW aftermarket producers and the most reliable replacement maintenance parts are all at Turner Motorsport. Over time, factory exhaust on the cleanest examples of BMW heritage shows their age. Our factory replacement exhausts are just what you need to keep your favorite car in showroom condition or finish off your restoration. If you are looking for a bump in sound and power, you can also find our performance options like Headers, Downpipes, and Mufflers from Corsa, DINAN, and others on this page.

Sub-Categories

Sort By:

Turner Motorsport Valved Performance Exhaust - BMW F8x M3/M4 S55 (MUS...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Turner Motorsport - Corporate Logo
T#:637254
Part#: 025181TMS11
Ships on Aug 28, 2026
Sale - Save 10% $ 1,423.99

This product was last offered at the strikethrough price on
06-14-2026

Starting at $ 1,281.59 USD
Free Shipping
Sale - Save 10%
$ 1,423.99

This product was last offered at the strikethrough price on
06-14-2026

Starting at $ 1,281.59 USD
Free Shipping
New to our lineup of exceptional performance upgrades for your BMW, the Turner F8X M3/M4 exhaust system is here to improve your driving experience with hearty exhaust notes and a noticeable bump in performance. Our Exhaust system sports Mandrel bent dual 2.5” 304SS pipes with a nice brushed finish. Exhaust gases flow through efficient piping to High flow, valved, stainless steel mufflers. Under normal driving conditions, the vacuum controlled muffler valves stay closed, and the exhaust is quite unassuming. Nobody will really even suspect your car even has an aftermarket exhaust system, as it sounds nearly identical to the factory system. But, when you open up the throttle, the vacuum controlled valves open up, and this exhaust gives your car a menacing growl. Designed to mount using the factory exhaust hangers, this exhaust is a bolt-on replacement for the OE version. To help reduce the time you spend installing the system, Accuseal slip-fit joints are included to make fitment as easy as possible. The Turner Motorsport full exhaust system includes a High flow, valved, stainless-steel muffler, and is available as an axle-back or cat-back system! Give your M3/M4 the dual-purpose exhaust system that satisfies both your neighbors and your need for volume with the Turner Motorsport Valved Performance Exhaust System.
Show More Show Less
Active Autowerke Signature Performance Exhaust System - Brushed Silve...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Active Autowerke - Corporate Logo
T#:397486
Part#: 11-045
Ships in 3 Business Days
$ 3,563.00 USD
Free Shipping
$ 3,563.00 USD
Free Shipping
The Active Autowerke F8X rear exhaust was carefully engineered to eliminate the unflattering sound of the factory M3 and M4 exhaust, while also allowing for optimum flow and resonance. Every effort was made in addressing the not so appeasing sound of the stock OEM exhaust, but in designing an exhaust worthy for an "M" car. We believe our rear exhaust combined with our mid-pipe offers the deepest sound and best performance of any other system on the market today. Available for both models, this axle-back exhaust gives your BMW the deep, throaty, growl a car of its caliber should have had from the factory!
Show More Show Less
Akrapovic Slip-On Titanium Exhaust System - Titanium Or Carbon Fiber ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Akrapovic - Corporate Logo
T#:9383747
Part#: M-BM/T/8HKTPDK
In Stock at Vendor
Starting at $ 7,034.99 USD
Starting at $ 7,034.99 USD
This axle-back exhaust system is manufactured entirely from titanium. This makes this system ideal for cutting weight while being structurally stronger than the OE exhaust system. The engineers at Akrapovic have retained the dual mode exhaust flap control from the original system. This allows the vehicle to have a more civilized, but deeper than stock sound at low speed. However, at higher RPM (or when selecting the S mode on the gearshift) the muffler is bypassed, creating a deep and sporty sound much more in keeping with the personality of the car. The included exhaust pipe tips are made completely from titanium OR a carbon fiber/titanium composite to add a high-end, refined style. Performance has not been left out of the design. The system dramatically reduces backpressure and is an excellent starting point for further engine tuning or turbo modifications. Even when installed on an otherwise stock vehicle a gain of 7.3 horsepower and 17.4 Nm/12.8 lbs-ft of torque are achieved. Furthermore, a weight reduction of 3.0 kg/6.6 lbs. is realized. The OEM catalysts are retained, so no reflashing of the ECU is required and the check engine light will not be triggered. Titanium muffler with integrated exhaust valves Statistics: +7.3 HP (at 4400 rpm) +17.4 Nm/12.8 lbs-ft of torque (at 2350 rpm) 3 kg/6.6 lbs. lighter than stock Not for sale outside the US or Canada.
Show More Show Less

Stainless Performance CATBACK Exhaust - Valved - F80 F82 M3/M4 ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Turner Motorsport - Corporate Logo
T#:18070232
Part#: 025181TMSKT
Ships on Aug 28, 2026
Sale - Save 10% $ 2,080.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,872.89 USD
Free Shipping
Sale - Save 10%
$ 2,080.99

This product was last offered at the strikethrough price on
06-14-2026

$ 1,872.89 USD
Free Shipping

We set out to amplify the F80/F82 with a proper exhaust system. To accomplish this goal, our engineers at Turner increased flow and delivered an exhaust system that captures the full unrestricted sound of the twin turbo inline-6 S55 engine. The increase in flow was gained from dual 2.5" stainless exhaust pipes that feed into one of the best designed mufflers on the market. Our in-house engineers specifically designed the muffler with flow in mind to ensure that even with the exhaust valves closed, our Turner muffler flows better and sounds better than the stock muffler. The best part of the catback exhaust is the capability to control just how aggressive you want to your exhaust to sound, far beyond the point that the factory exhaust is able to perform. All of this plus the direct fitment and straight forward installation leads to the Turner Stainless exhaust being the clear answer in your mission to find the best exhaust for your S55 powered F80 or F82.

Transform the whole dynamic of your M3 or M4 with added performance, increased flow and not to mention the absolutely wicked sound you get from the upgraded Turner Performance Catback!

Part Design:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
304SS pipe Material in a natural finish
2.5"OD mandrel bent tubing
Barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​
Strategically placed slip joints provide the most adjustability to obtain perfect fitment
Valved Muffler:
Optimized for superior flow over OEM
Utilizes factory valve control
Kit Contents:

Full 304SS Valved muffler utilizing oem style exhaust valves
High-Flow middle muffler section for better sound, performance and weight savings.
Dual 2.5" 304SS Mid-pipes
Clamps, gaskets and Hardware for an OEM+ install
Brushed Turner Exhaust tips - 2.5" Inlet, 4.0" Outlet

Show More Show Less

Active Autowerke Signature Performance Exhaust System - Matte Black T...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Active Autowerke - Corporate Logo
T#:590346
Part#: 11-045MB
Ships in 3 Business Days
$ 3,629.00 USD
Free Shipping
$ 3,629.00 USD
Free Shipping
Active Autowerke is proud to announce the release of the Signature F8X M3/M4 Exhaust System. This system is the result of countless hours of R&D to obtain the perfect combination of performance and sound. Constructed of 100% 304 TIG welded stainless steel, Active Autowerke has created a modular exhaust system that will provide enough flow to support power levels way above the stock S55. The stock S55 Midpipe is a dual-pipe system from each turbo that leads to the rear muffler. The resulting sound is far from pleasant, and without any real scavenging effect the turbo lag is fairly pronounced. By converting to a single 3.5" pipe directly after the downpipes, AA's system promotes exhaust scavenging along with higher exhaust velocity to produce a quicker spool, more power, and a much smoother exhaust note.
Show More Show Less
Universal Stainless Steel Straight Pipe - 2.5" OD - 24" Length ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Turner Motorsport - Corporate Logo
T#:587358
Part#: TMS24SPKT
In Stock
Sale - Save 25% $ 42.99

This product was last offered at the strikethrough price on
06-14-2026

$ 32.24 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 42.99

This product was last offered at the strikethrough price on
06-14-2026

$ 32.24 USD
Free Shipping on orders $49 and up
Rust can turn your exhaust system into useless scrap metal in a short period of time if you don't start with the right materials. Ensure your custom exhaust lasts as long as possible with this T304 stainless steel universal exhaust pipe! PART DESIGN Made from T304 Stainless Steel for corrosion resistance and features an attractive brushed finish 2.50" outside diameter (OD) 1.5mm (.060") wall thickness tubing for durability Overall Length (OAL) is approximately 24.00"
Show More Show Less

Exhaust Valve Cable Extender - F8X
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Active Autowerke - Corporate Logo
T#:2393407
Part#: 11-074
Ships in 3 Business Days
$ 56.99 USD
Free Shipping on orders $49 and up
Needed for some added rear exhaust systems as the stock cable may be too short.
Active Autowerke High Flow Catted Downpipes - F8X S55
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Active Autowerke - Corporate Logo
T#:2393422
Part#: 11-080
Ships in 3 Business Days
$ 2,849.99 USD
Free Shipping
$ 2,849.99 USD
Free Shipping
For over 30 years, Active Autowerke has been the one to turn to for high quality BMW performance products. Committed to enhancing the performance of BMWs through the highest quality products is what Active Autowerke is all about. Developed for precise fitment on the F87 M2C, F80 M3 and F82 BMW M4, the difference in performance will be noticeable the moment you leave your driveway! Features: NO CEL when using this downpipe Quicker turbo spool and response Less restrictive, more free flowing Improved low end and mid range performance as well as higher boost levels GESI EPA registered high flow and fully OBD2 compliant Casted upper stainless steel V-Band for precise fitment Withstands up to 1500F Can reach operational efficiency within 9 seconds of startup Easily bolts-on with no cutting or welding required Accepts OEM O2 sensor heat shield Durable construction from TIG welded 304 stainless steel Precise fitment Ultra high flow 400 cell per square inch catalyst EPA compliant for use on OBD2 vehicles (1996 and newer) except in California 304 stainless steel substrate is furnace braised to the mantle for outstanding durability GESI proprietary precious metal loading technology ensures greatly reduced emissions Ideal for Forced Induction Applications with no loss of HP Both passengers and drivers are safe from harmful emissions and noise Covered by 5 Year / 50,000 Mile Warranty (on catalytic converter) Made in Miami, Florida
Show More Show Less

BMW F8X G8X Exhaust Valve Cable Extender
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Active Autowerke - Corporate Logo
T#:22295072
Part#: 11-074G
Ships in 3 Business Days
$ 85.00 USD
Free Shipping
$ 85.00 USD
Free Shipping

BMW F8X G8X Exhaust Valve Cable Extender from Turner Motorsport is essential for upgrading your BMW's exhaust system, particularly if you're experiencing issues with stock cable lengths. This extender ensures a proper connection for rear exhaust systems that may have shorter cables.

  • Model Compatibility: Designed for BMW models F80, F82, F87, G80, G82, G87, and F97.
  • Proper Fit: Ensures a correct fit for rear exhaust systems, preventing any issues with cable length.
  • Available Lengths: Offered in 12-inch and 24-inch options to suit different needs.
  • Custom Lengths: Custom lengths available upon request for a tailored solution.
  • High-Quality Construction: Built to maintain the reliability and performance of your BMW’s exhaust system.
Show More Show Less

Universal Stainless Steel 90 Degree Pipe - 3.0" OD
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Turner Motorsport - Corporate Logo
T#:587361
Part#: TMS3090PKT
In Stock
Sale - Save 10% $ 40.99

This product was last offered at the strikethrough price on
05-03-2026

$ 36.89 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 40.99

This product was last offered at the strikethrough price on
05-03-2026

$ 36.89 USD
Free Shipping on orders $49 and up
Rust can turn your exhaust system into useless scrap metal in a short period of time if you don't start with the right materials. Ensure your custom exhaust lasts as long as possible with this T304 stainless steel universal exhaust pipe! PART DESIGN Made from T304 Stainless Steel for corrosion resistance and features an attractive brushed finish 3.0" outside diameter (OD) 1.5mm (.060") wall thickness tubing for durability Minimum Leg Length - 8.25" Bend Radius - 4.75" @ 90° angle
Show More Show Less
Universal Exhaust Pipe Reducer - 3" OD To 60mm ID
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Turner Motorsport - Corporate Logo
T#:587351
Part#: TMS3060ER2KT
In Stock
Sale - Save 25% $ 39.99

This product was last offered at the strikethrough price on
06-14-2026

$ 29.99 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 39.99

This product was last offered at the strikethrough price on
06-14-2026

$ 29.99 USD
Free Shipping on orders $49 and up
Connect your differently sized exhaust pipes quick and easy with this T304 stainless steel exhaust pipe reducer. PART DESIGN Made from T304 Stainless Steel for corrosion resistance and features a raw finish 3.0" OD (Butt) To 60mm ID (slip) connections 1.5mm (.060") wall thickness tubing for durability Length on 60mm ID side - 2.25" Length on 3.0" OD side - 3.50"
Show More Show Less
Universal Stainless Steel J-Pipe - 2.5" OD
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Turner Motorsport - Corporate Logo
T#:587362
Part#: TMS25JPKT
In Stock
Sale - Save 5% $ 46.99

This product was last offered at the strikethrough price on
06-14-2026

$ 44.64 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 46.99

This product was last offered at the strikethrough price on
06-14-2026

$ 44.64 USD
Free Shipping on orders $49 and up
Rust can turn your exhaust system into useless scrap metal in a short period of time if you don't start with the right materials. Ensure your custom exhaust lasts as long as possible with this T304 stainless steel universal exhaust pipe! PART DESIGN Made from T304 Stainless Steel for corrosion resistance and features an attractive brushed finish 2.5" outside diameter (OD) 1.5mm (.060") wall thickness tubing for durability U-Bend Centerline Radius - 3.50" @ 180° angle Leg Length "A" - 5.0" Leg Length "B" - 5.50" Leg Length "C" - 7.0"
Show More Show Less


Stainless Steel V-Band Clamp - 2.5"
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Turner Motorsport - Corporate Logo
T#:587344
Part#: TMS25VBKT
In Stock
Sale - Save 25% $ 49.99

This product was last offered at the strikethrough price on
06-14-2026

$ 37.49 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 49.99

This product was last offered at the strikethrough price on
06-14-2026

$ 37.49 USD
Free Shipping on orders $49 and up
Ensure you are building your custom exhaust system with only the best! This V-Band Clamp is made completely of T304 stainless steel for high strength and corrosion resistance and comes with zinc-coated hardware. PART DESIGN Weld Rings are made from T304 Stainless Steel for corrosion resistance Weld Rings are 2.5" inside diameter (ID) to slip over a 2.5" OD tube Weld Rings feature a unique "centering ring" on the ID to aid in the alignment of assembly V-Band clamp is T304 Stainless Steel Securing hardware is Zinc-coated steel with high-temp poly. lock nut INSTALLATION AND SUPPORT These are universal parts, meaning they have no direct fitment to any particular vehicle. Custom welding and fabrication is required. Special prep/clean procedures must be adhered to for proper welding.
Show More Show Less
Maad Maxx Rear Exhaust Section - 3 Can Valve
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Active Autowerke - Corporate Logo
T#:641583
Part#: 11-073
Ships in 10 Business Days
$ 2,374.99 USD
Free Shipping
$ 2,374.99 USD
Free Shipping

Elevate the performance and sound of your BMW F80 M3 or F82 M4 with the Active Autowerke F8X rear exhaust, now available at Turner Motorsport. Crafted with over 30 years of expertise, this exhaust system is designed to eliminate the unflattering factory M3 and M4 exhaust sound while optimizing flow and resonance. The result is a deep, throaty growl, enhancing the overall driving experience. Active Autowerke's dedication to quality is evident in every aspect, from addressing the stock OEM exhaust sound to creating an exhaust worthy of an "M" car. The newly introduced "Max Max" valved version further enhances performance and sound, providing the ultimate solution for BMW enthusiasts.

  • Improved exhaust sound for BMW F80 M3 and F82 M4
  • Optimal flow and resonance
  • "Max Max" valved version for enhanced performance
  • Made in the USA
  • Significant power gains: 18+ WHP and 30+ LB-FT over stock*
  • Quicker turbo spool
  • Low, deep rumble for an enhanced driving experience
  • Flex joints reduce vibration
  • Double-canned muffler reduces resonance
  • Guaranteed fit for all F80 BMW M3/F82 BMW M4
  • Includes all necessary installation hardware
Show More Show Less
Universal Exhaust Pipe Reducer - 3" ID To 60mm OD
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Turner Motorsport - Corporate Logo
T#:587350
Part#: TMS3060ER1KT
In Stock
Sale - Save 25% $ 39.99

This product was last offered at the strikethrough price on
06-14-2026

$ 29.99 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 39.99

This product was last offered at the strikethrough price on
06-14-2026

$ 29.99 USD
Free Shipping on orders $49 and up
Connect your differently sized exhaust pipes quick and easy with this T304 stainless steel exhaust pipe reducer. PART DESIGN Made from T304 Stainless Steel for corrosion resistance and features a raw finish 3.0" ID (Slip) To 60mm OD (Butt) connections 1.5mm (.060") wall thickness tubing for durability Length on 60mm OD side - 2.25" Length on 3.0" ID side - 3.50"
Show More Show Less

Universal Stainless Steel J-Pipe - 3.0" OD
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Turner Motorsport - Corporate Logo
T#:587363
Part#: TMS30JPKT
Ships on Feb 8, 2027
Sale - Save 5% $ 53.99

This product was last offered at the strikethrough price on
05-03-2026

$ 51.29 USD
Sale - Save 5%
$ 53.99

This product was last offered at the strikethrough price on
05-03-2026

$ 51.29 USD
Rust can turn your exhaust system into useless scrap metal in a short period of time if you don't start with the right materials. Ensure your custom exhaust lasts as long as possible with this T304 stainless steel universal exhaust pipe! PART DESIGN Made from T304 Stainless Steel for corrosion resistance and features an attractive brushed finish 3.0" outside diameter (OD) 1.5mm (.060") wall thickness tubing for durability U-Bend Centerline Radius - 5.0" @ 180° angle Leg Length "A" - 5.0" Leg Length "B" - 9.50" Leg Length "C" - 10.5"
Show More Show Less

Universal Stainless Steel Straight Pipe - 3.0" OD - 24" Length ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Turner Motorsport - Corporate Logo
T#:587359
Part#: TMS30SPKT
Ships on Feb 8, 2027
Sale - Save 25% $ 47.99

This product was last offered at the strikethrough price on
06-14-2026

$ 35.99 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 47.99

This product was last offered at the strikethrough price on
06-14-2026

$ 35.99 USD
Free Shipping on orders $49 and up
Rust can turn your exhaust system into useless scrap metal in a short period of time if you don't start with the right materials. Ensure your custom exhaust lasts as long as possible with this T304 stainless steel universal exhaust pipe! PART DESIGN Made from T304 Stainless Steel for corrosion resistance and features an attractive brushed finish 3.0" outside diameter (OD) 1.5mm (.060") wall thickness tubing for durability Overall Length (OAL) is approximately 24.00"
Show More Show Less
Universal Exhaust Pipe Reducer - 3" ID To 65mm OD
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Turner Motorsport - Corporate Logo
T#:587349
Part#: TMS3065ERKT
In Stock
Sale - Save 25% $ 39.99

This product was last offered at the strikethrough price on
06-14-2026

$ 29.99 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 39.99

This product was last offered at the strikethrough price on
06-14-2026

$ 29.99 USD
Free Shipping on orders $49 and up
Connect your differently sized exhaust pipes quick and easy with this T304 stainless steel exhaust pipe reducer. PART DESIGN Made from T304 Stainless Steel for corrosion resistance and features a raw finish 3.0" ID (Slip fit) X 65mm OD (Butt) connections 1.5mm (.060") wall thickness tubing for durability Length on 65mm OD side - 2.25" Length on 3.0" ID side - 3.50"
Show More Show Less

Stainless Steel V-Band Clamp - 3.0"
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Turner Motorsport - Corporate Logo
T#:587341
Part#: TMS30VBKT
In Stock
Sale - Save 25% $ 54.99

This product was last offered at the strikethrough price on
06-14-2026

$ 41.24 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 54.99

This product was last offered at the strikethrough price on
06-14-2026

$ 41.24 USD
Free Shipping on orders $49 and up
Ensure you are building your custom exhaust system with only the best! This V-Band Clamp is made completely of T304 stainless steel for high strength and corrosion resistance and comes with zinc-coated hardware. PART DESIGN Weld Rings are made from T304 Stainless Steel for corrosion resistance Weld Rings are 3.0" inside diameter (ID) to slip over a 3.0" OD tube Weld Rings feature a unique "centering ring" on the ID to aid in the alignment of assembly V-Band clamp is T304 Stainless Steel Securing hardware is Zinc-coated steel with high-temp poly. lock nut ​INSTALLATION AND SUPPORT These are universal parts, meaning they have no direct fitment to any particular vehicle. Custom welding and fabrication is required. Special prep/clean procedures must be adhered to for proper welding.
Show More Show Less
Maad Maxx Rear Exhaust Section 3 Can Valve - With Black Tips ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Active Autowerke - Corporate Logo
T#:6258362
Part#: 11-073B
Ships in 3 Business Days
$ 2,440.99 USD
Free Shipping
$ 2,440.99 USD
Free Shipping
The Active Autowerke F8X rear exhaust was carefully engineered to eliminate the unflattering sound of the factory M3 and M4 exhaust, while also allowing for optimum flow and resonance.

Stainless Steel Weld-In Oxygen Sensor Bung - M18x1.5mm
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Turner Motorsport - Corporate Logo
T#:587345
Part#: TMS02BUNGKT
In Stock
Sale - Save 25% $ 3.99

This product was last offered at the strikethrough price on
06-14-2026

$ 2.99 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 3.99

This product was last offered at the strikethrough price on
06-14-2026

$ 2.99 USD
Free Shipping on orders $49 and up
Finish your custom exhaust with this T304 stainless steel weld-in oxygen sensor bung. PART DESIGN CNC-cut from T304 Stainless Steel for corrosion resistance Radiused to match 2.50"-3.00" OD tubing for ease of welding Threaded for M18x1.5mm RH oxygen sensors INSTALLATION AND SUPPORT These are universal parts, meaning they have no direct fitment to any particular vehicle. Custom welding and fabrication is required. Special prep/clean procedures must be adhered to for proper welding.
Show More Show Less

BMW F8X Maad Maxx Rear Exhaust Section 3 Can Valve - With Carbon Fibe...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Active Autowerke - Corporate Logo
T#:6924330
Part#: 11-073CFT
Ships in 3 Business Days
$ 2,999.00 USD
Free Shipping
$ 2,999.00 USD
Free Shipping

BMW F8X Maad Maxx Rear Exhaust Section 3 Can Valve - With Carbon Fiber Tips by Active Autowerke redefines performance and sound for your BMW M3 or M4. Engineered to eliminate the factory exhaust's unflattering sound while optimizing flow and resonance, this axle-back exhaust delivers a deep, throaty growl that enhances the car's aggressive profile. The valved design allows for adjustable sound levels, offering both performance and refinement in one package.

  • Enhances exhaust sound with deep, throaty growl
  • Valved design for adjustable sound levels
  • Improves airflow for increased performance
  • Made in the USA with high-quality materials
  • Carbon fiber tips for a stylish finish

Upgrade your BMW F80 M3 or F82 M4 with the Active Autowerke Maad Maxx Rear Exhaust Section for improved performance and a commanding exhaust note.

Show More Show Less
Akrapovic 14-17 BMW M3 (F80) Slip-On Line (Titanium) w/ Carbon Tips ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Akrapovic - Corporate Logo
T#:26538306
Part#: M-BM/T/8H-C
In Stock at Vendor
$ 7,034.99 USD
Free Shipping on orders $49 and up
The latest addition to the BMW M series, the impressive M3/M4, delivers outstanding performance that can be further enhanced with the addition of an Akrapovič Slip-On exhaust system. Constructed from titanium, with specific components crafted in Akrapovič's own foundry, this system boasts larger pipes compared to the stock exhaust, resulting in reduced back pressure and increased power, especially at lower RPMs. Featuring a completely new design, it contributes to weight reduction and delivers added power while producing a sporty sound meticulously engineered to enhance lower frequencies for an immersive auditory experience. The heightened power and torque contribute to an enhanced driving experience, complemented by improved agility. To elevate the visual appeal, the Slip-On system offers the choice of titanium or carbon tailpipes and an eye-catching carbon rear diffuser. Vehicles equipped with Akrapovič exhaust systems benefit from significant performance enhancements and heightened responsiveness, experiencing substantial increases in power and torque across the entire RPM range. All Akrapovič exhaust systems undergo precise measurements using computer-controlled flowbenches.
Show More Show Less
Downpipe W Active A-flow Cat - F3x/F87 M2
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Active Autowerke - Corporate Logo
T#:51110147
Part#: 11-040A
Ships in 3 Business Days
New Item
$ 1,399.00 USD
Free Shipping
$ 1,399.00 USD
Free Shipping
Active Autowerke’s Aflow Catted Downpipe offers the perfect balance for the BMW owner who demands high performance but requires daily-driver refinement. Unlike track-only "straight pipes," the Aflow system utilizes a sophisticated metallic substrate catalytic converter that significantly reduces harmful emissions and raw fuel odors. This allows you to enjoy the power of a high-flow exhaust while maintaining a clean cabin environment and remaining OBD2 compliant. Each unit is custom-made in Miami and features cast upper flanges to ensure a factory-perfect, leak-free seal every time. Key Features: Clean Performance: High-flow catalyst virtually eliminates the raw fuel smell associated with aftermarket downpipes. Precision Engineering: Features a casted stainless steel upper V-band for a surgical fit against the turbo housing. OBD2 Compliance: Engineered to satisfy factory emissions monitors, keeping the dash clear of "Efficiency" codes. Refined Acoustics: Increases the exhaust volume under wide-open throttle while remaining quiet and sophisticated during highway cruising. Heat Management: Designed to withstand the intense thermal cycles of a high-output turbocharged engine. Specifications: Catalyst Cell Density: Optimized for high-flow performance and emissions scrubbing Fabrication: Hand-made in Miami, Florida, USA Inlet Type: Casted Stainless Steel V-Band Weight: Significantly lighter than the heavy factory ceramic catalytic converter Vehicle Fitment: * 2014–2016 BMW M235i (F22) 2012–2015 BMW 335i (F30/F31/F34) 2014–2016 BMW 435i (F32/F33/F36) 2016–2018 BMW M2 (F87 - N55 Engine Only)
Show More Show Less


Downpipes W Active A-flow Cats - F10/F12 M5/M6
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Active Autowerke - Corporate Logo
T#:51110145
Part#: 11-093A
Ships in 3 Business Days
New Item
$ 2,279.00 USD
Free Shipping
$ 2,279.00 USD
Free Shipping
Efficiency in a forced-induction engine is determined by the pressure differential across the turbine wheel. Active Autowerke's Aflow Catted Downpipes maximize this differential by utilizing a streamlined, low-restriction design. Each set is hand-made from premium 304 stainless steel and features furnace-braised substrates for maximum longevity under the extreme temperatures of the "hot-V" turbo configuration. The integrated 400-cell catalytic converters reach operational efficiency within just 9 seconds of startup, ensuring the system meets modern OBD2 requirements while supporting up to 800 HP without a loss in performance. Key Features: Precision Fitment: Each unit is meticulously TIG-welded and checked against master jigs to guarantee a perfect bolt-on installation with no cutting or welding. EPA Compliant: 49-state EPA registered and fully OBD2 compliant (Excludes California). Thermal Management: Engineered to reduce radiant heat in the engine bay compared to restrictive factory units. High-Flow Catalyst Substrate: 304 stainless steel substrate furnace-braised to the mantle for outstanding vibration and heat resistance. Comprehensive Protection: Covered by a 5-year/50,000-mile structural warranty and a 2-year core warranty. Specifications: Inlet Type: Precision-casted 3.5" Stainless Steel V-Band Outlet Diameter: 3.0" Mandrel-Bent Tubing Catalyst Matrix: 400 Cells Per Square Inch Operating Temperature: Tested to withstand up to 1,500°F Vehicle Fitment: * 2011–2016 BMW M5 (F10) 2012–2018 BMW M6 Coupe / Convertible / Gran Coupe (F12/F13/F06) Custom Build Time: Typically made-to-order (Approx. 2-week lead time)
Show More Show Less
Akrapovic Sound Kit - F8X BMW M3 & M4
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Akrapovic - Corporate Logo
T#:557171
Part#: P-HF1100
Back Ordered
$ 1,029.99 USD
Free Shipping
$ 1,029.99 USD
Free Shipping
The Sound Kit is a remote control for the valves on the Akrapovic muffler. While the muffler valves are also controlled like the factory valves in Comfort, Sport, and Sport+ modes, the Sound Kit will let you open or close the valves via handheld remote or even from your phone (iOS or Android app). The Sound Kit works with the existing wiring for the Akrapovic system so installation is a breeze.
Show More Show Less
Turner 4" Universal Double Wall Exhaust Tip w/ Brushed Finish ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not vehicle specific. You MUST measure prior to purchasing!
Turner Motorsport - Corporate Logo
T#:599666
Part#: 026374TMS02-10
In Stock
Sale - Save 20% $ 63.99

This product was last offered at the strikethrough price on
06-14-2026

$ 51.19 USD
Free Shipping
Sale - Save 20%
$ 63.99

This product was last offered at the strikethrough price on
06-14-2026

$ 51.19 USD
Free Shipping
Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model. Features & Specifications: 2.5" Inner Diameter 4.0" Outer Diameter Brushed Finish Double Wall Construction Angle Cut Style Includes Stainless Steel Exhaust Clamp
Show More Show Less

Turner Double Wall Slash Cut Exhaust Tip - 2.75 Inlet - 3.5 OD - Step...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not vehicle specific. You MUST measure prior to purchasing!
Turner Motorsport - Corporate Logo
T#:9642111
Part#: 026732TMS03-11
In Stock
Sale - Save 10% $ 139.99

This product was last offered at the strikethrough price on
06-14-2026

$ 125.99 USD
Free Shipping
Sale - Save 10%
$ 139.99

This product was last offered at the strikethrough price on
06-14-2026

$ 125.99 USD
Free Shipping
Introducing the beautiful Titanium Black Chrome Slash Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic mirror finish and features a slash cut, stepped design sure to turn heads!

Turner 3.5" Universal Single Wall Exhaust Tip w/ Brushed Finish ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not vehicle specific. You MUST measure prior to purchasing!
Turner Motorsport - Corporate Logo
T#:599664
Part#: 026374TMS04-01
In Stock
Sale - Save 10% $ 71.99

This product was last offered at the strikethrough price on
06-14-2026

$ 64.79 USD
Free Shipping
Sale - Save 10%
$ 71.99

This product was last offered at the strikethrough price on
06-14-2026

$ 64.79 USD
Free Shipping
Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model. Features & Specifications: 2.5" Inner Diameter 3.5" Outer Diameter Brushed Finish Single Wall Construction Straight Cut Style Includes Stainless Steel Exhaust Clamp
Show More Show Less
Turner Double Wall Slash Cut Exhaust Tip - 2.75 Inlet - 3.5 OD - Step...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not vehicle specific. You MUST measure prior to purchasing!
Turner Motorsport - Corporate Logo
T#:9642112
Part#: 026732TMS03-10
In Stock
Sale - Save 10% $ 139.99

This product was last offered at the strikethrough price on
06-14-2026

$ 125.99 USD
Free Shipping
Sale - Save 10%
$ 139.99

This product was last offered at the strikethrough price on
06-14-2026

$ 125.99 USD
Free Shipping
Introducing the beautiful Titanium Black Chrome Slash Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic mirror finish and features a slash cut, stepped design. The mirror finish and slash cut design is sure to turn heads! Universal / custom fit. Not direct replacement of factory tips on factory exhaust. Must measure your existing pipe diameter and clearance.
Show More Show Less

Turner Motorsport Rolled Angle Exhaust Tip - 3.0 Inlet - 3.0 OD - Ste...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not vehicle specific. You MUST measure prior to purchasing!
Turner Motorsport - Corporate Logo
T#:5189169
Part#: 026732TMS02-13
In Stock
Sale - Save 10% $ 173.99

This product was last offered at the strikethrough price on
06-14-2026

$ 156.59 USD
Free Shipping
Sale - Save 10%
$ 173.99

This product was last offered at the strikethrough price on
06-14-2026

$ 156.59 USD
Free Shipping

Turner Motorsport Rolled Angle Exhaust Tip - 3.0 Inlet - 3.0 OD - Stepped Left - Chrome brings a sleek and stylish upgrade to BMW exhaust systems. This high-quality exhaust tip features a striking chrome finish and a rolled angle, stepped design that adds both aesthetics and performance to your vehicle. Its precision design ensures a perfect fit and a bold look. With a 3.0-inch inlet and 3.0-inch outer diameter, this exhaust tip is designed to enhance the visual appeal of your BMW's exhaust system.

  • Premium Chrome Finish: Adds a high-gloss, polished look to your vehicle’s exhaust.
  • Rolled Angle Design: Provides a stylish and aggressive appearance.
  • Stepped Left Design: Ensures a precise fit and a distinctive look.
  • 3.0-Inch Inlet & Outer Diameter: Perfectly matches BMW exhaust systems for a seamless upgrade.
  • Durable Construction: Built to withstand the elements and maintain its shine.
Show More Show Less
3.5" Universal Brushed Aluminum Swivel Exhaust Tip
Can be used on any 2.5" exhaust piping. Measure before ordering.
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Turner Motorsport - Corporate Logo
T#:13957902
Part#: 049478LA03-04
In Stock
Sale - Save 10% $ 56.99

This product was last offered at the strikethrough price on
06-14-2026

$ 51.29 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 56.99

This product was last offered at the strikethrough price on
06-14-2026

$ 51.29 USD
Free Shipping on orders $49 and up

Universal 2.5" inlet to 3.5" outlet exhaust tip. Priced per exhaust tip.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Brushed Aluminum Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Show More Show Less

Turner Motorsport Double Wall Slash Cut Exhaust Tip - 2.5 Inlet - 3.0...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not vehicle specific. You MUST measure prior to purchasing!
Turner Motorsport - Corporate Logo
T#:9642109
Part#: 026732TMS02-01
Ships on Sep 24, 2026
Sale - Save 15% $ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 105.39 USD
Free Shipping
Sale - Save 15%
$ 123.99

This product was last offered at the strikethrough price on
05-03-2026

$ 105.39 USD
Free Shipping
Introducing the beautiful Mirrored Slash Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic mirror finish and features a slash cut, stepped design. The mirror finish and slash cut design is sure to turn heads!
Show More Show Less

Turner Motorsport Rolled Angle Exhaust Tip - 3.0 Inlet - 3.0 OD - Ste...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not vehicle specific. You MUST measure prior to purchasing!
Turner Motorsport - Corporate Logo
T#:3047555
Part#: 026732TMS03-13
Ships on Aug 17, 2026
Sale - Save 10% $ 162.99

This product was last offered at the strikethrough price on
06-14-2026

$ 146.69 USD
Free Shipping
Sale - Save 10%
$ 162.99

This product was last offered at the strikethrough price on
06-14-2026

$ 146.69 USD
Free Shipping

We are proud to introduce our latest exhaust offering, the Black Chrome Rolled Angle Exhaust Tip! This tip comes in a gorgeous chrome finish and features a rolled angle, stepped design. Warning - you may become obsessed with cleaning and taking care of these beautiful tips!

Other Features Include:

3.0 Inlet
3.0 Outer Diameter
Black chrome Finish
Left Stepped Design
Rolled Angle Design

Show More Show Less
3.5" Universal Black Chrome Swivel Exhaust Tip
Can be used on any 2.5" exhaust piping. Measure before ordering.
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Turner Motorsport - Corporate Logo
T#:39802151
Part#: 049478LA03-02
In Stock
Sale - Save 10% $ 69.99

This product was last offered at the strikethrough price on
06-14-2026

$ 62.99 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 69.99

This product was last offered at the strikethrough price on
06-14-2026

$ 62.99 USD
Free Shipping on orders $49 and up

Universal 2.5" inlet to 3.5" outlet exhaust tip. Priced per exhaust tip.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Brushed Aluminum Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Show More Show Less
4.0" Universal Black Chrome Swivel Exhaust Tip
Can be used on any 2.5" exhaust piping. Measure before ordering.
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Turner Motorsport - Corporate Logo
T#:39802152
Part#: 049478LA01-02
In Stock
$ 68.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
$ 68.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up

Universal 2.5" inlet to 4.0" outlet exhaust tip. Priced per exhaust tip.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
4.0" Outer Diameter
Brushed Aluminum Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Show More Show Less


Double Wall Slash Cut Exhaust Tip - 3.0 Inlet - 3.5 OD - Stepped Righ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not vehicle specific. You MUST measure prior to purchasing!
Turner Motorsport - Corporate Logo
T#:9642120
Part#: 026732TMS02-17
In Stock
Sale - Save 31% $ 130.99

This product was last offered at the strikethrough price on
05-03-2026

$ 89.99 USD
Free Shipping
Sale - Save 31%
$ 130.99

This product was last offered at the strikethrough price on
05-03-2026

$ 89.99 USD
Free Shipping
Introducing the beautiful Mirrored Slash Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic mirror finish and features a slash cut, stepped design. The mirror finish and slash cut design is sure to turn heads!
Show More Show Less
Turner Motorsport Double Wall Straight Cut Exhaust Tip - 3.0 Inlet - ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not vehicle specific. You MUST measure prior to purchasing!
Turner Motorsport - Corporate Logo
T#:9642119
Part#: 026732TMS06-17
In Stock
Sale - Save 53% $ 149.99

This product was last offered at the strikethrough price on
05-03-2026

$ 70.02 USD
Free Shipping on orders $49 and up
Sale - Save 53%
$ 149.99

This product was last offered at the strikethrough price on
05-03-2026

$ 70.02 USD
Free Shipping on orders $49 and up
Introducing the beautiful Brushed Stainless Straight Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic brushed stainless finish and features a straight cut, stepped design. This brushed stainless finish will give your vehicle a classic, OE+ look!
Show More Show Less
Turner 4" Double Wall Exhaust Tip - Polished Black Chrome Finish ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not vehicle specific. You MUST measure prior to purchasing!
Turner Motorsport - Corporate Logo
T#:5175767
Part#: 026374TMS01-08
In Stock
Sale - Save 21% $ 93.99

This product was last offered at the strikethrough price on
05-03-2026

$ 73.99 USD
Free Shipping
Sale - Save 21%
$ 93.99

This product was last offered at the strikethrough price on
05-03-2026

$ 73.99 USD
Free Shipping

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

3.0" Inner Diameter
4.0" Outer Diameter
Black Chrome Finish
Double Wall Construction
Straight Cut Style
Includes Stainless Steel Clamp

Show More Show Less

Turner Motorsport Double Wall Straight Cut Exhaust Tip - 3.0 Inlet - ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not vehicle specific. You MUST measure prior to purchasing!
Turner Motorsport - Corporate Logo
T#:9642118
Part#: 026732TMS06-16
Ships on Aug 17, 2026
Sale - Save 15% $ 152.99

This product was last offered at the strikethrough price on
06-14-2026

$ 130.04 USD
Free Shipping
Sale - Save 15%
$ 152.99

This product was last offered at the strikethrough price on
06-14-2026

$ 130.04 USD
Free Shipping
Introducing the beautiful Brushed Stainless Straight Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic brushed stainless finish and features a straight cut, stepped design. This brushed stainless finish will give your vehicle a classic, OE+ look!
Show More Show Less

Turner Motorsport Double Wall Slash Cut Exhaust Tip - 2.5 Inlet - 3.0...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not vehicle specific. You MUST measure prior to purchasing!
Turner Motorsport - Corporate Logo
T#:9642107
Part#: 026732TMS02-02
In Stock
Sale - Save 10% $ 126.99

This product was last offered at the strikethrough price on
06-14-2026

$ 114.29 USD
Free Shipping
Sale - Save 10%
$ 126.99

This product was last offered at the strikethrough price on
06-14-2026

$ 114.29 USD
Free Shipping
Introducing the beautiful Mirrored Slash Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic mirror finish and features a slash cut, stepped design. The mirror finish and slash cut design is sure to turn heads!
Show More Show Less
Turner Motorsport BMW Double Wall Slash Cut Exhaust Tip - 2.5 Inlet -...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not vehicle specific. You MUST measure prior to purchasing!
Turner Motorsport - Corporate Logo
T#:2119655
Part#: 026732TMS06-01
Ships in 10 Business Days
Sale - Save 10% $ 128.99

This product was last offered at the strikethrough price on
06-14-2026

$ 116.09 USD
Free Shipping
Sale - Save 10%
$ 128.99

This product was last offered at the strikethrough price on
06-14-2026

$ 116.09 USD
Free Shipping
Introducing the beautiful Brushed Stainless Slash Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic brushed stainless finish and features a slash cut, stepped design. This brushed stainless finish will give your vehicle a classic, OE+ look!
Show More Show Less

Turner - Single Wall Straight Cut Exhaust Tip - 2.5 Inlet - 3.0 OD - ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not vehicle specific. You MUST measure prior to purchasing!
Turner Motorsport - Corporate Logo
T#:9642108
Part#: 026732TMS01-02
Ships on Oct 29, 2026
Sale - Save 31% $ 101.99

This product was last offered at the strikethrough price on
05-03-2026

$ 69.99 USD
Free Shipping on orders $49 and up
Sale - Save 31%
$ 101.99

This product was last offered at the strikethrough price on
05-03-2026

$ 69.99 USD
Free Shipping on orders $49 and up
Introducing the beautiful Brushed Straight Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic brushed finish and features a straight cut, stepped design. The brushed finish and slash cut design is sure to turn heads!
Show More Show Less
Turner Motorsport Double Wall Rolled Angle Tip - 2.75 Inlet 3.0 OD - ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not vehicle specific. You MUST measure prior to purchasing!
Turner Motorsport - Corporate Logo
T#:9642113
Part#: 026732TMS03-07
In Stock
Sale - Save 28% $ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.60 USD
Free Shipping
Sale - Save 28%
$ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.60 USD
Free Shipping
We are proud to introduce our latest exhaust offering, the Black Chrome Rolled Angle Exhaust Tip! This tip comes in a gorgeous black chrome finish and features a rolled angle, stepped design. Warning - you may become obsessed with cleaning and taking care of these beautiful tips! Other Features Include: 2.75 Inlet 3.0 Outer Diameter 7" Combined Width Black Chrome Left Stepped Design Double Wall Design Rolled Angle 290mm overall lenth
Show More Show Less

Turner Motorsport Double Wall Slash Cut - 2.5 Inlet 3.0 OD - Stepped ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not vehicle specific. You MUST measure prior to purchasing!
Turner Motorsport - Corporate Logo
T#:2119656
Part#: 026732TMS06-02
In Stock
Sale - Save 26% $ 125.99

This product was last offered at the strikethrough price on
05-03-2026

$ 92.99 USD
Free Shipping
Sale - Save 26%
$ 125.99

This product was last offered at the strikethrough price on
05-03-2026

$ 92.99 USD
Free Shipping
Introducing the beautiful Brushed Stainless Slash Cut Exhaust Tip from Turner Motorsport! This tip is a fantastic brushed finish and features a slash cut, stepped design. The brushed finish and slash cut design is sure to turn heads!
Show More Show Less

3.5" Universal Mirror Chrome Swivel Exhaust Tip
Can be used on any 2.5" exhaust piping. Measure before ordering.
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Turner Motorsport - Corporate Logo
T#:16109206
Part#: 049478LA03-01
In Stock
Sale - Save 5% $ 66.99

This product was last offered at the strikethrough price on
06-14-2026

$ 63.64 USD
Free Shipping
Sale - Save 5%
$ 66.99

This product was last offered at the strikethrough price on
06-14-2026

$ 63.64 USD
Free Shipping

Universal 2.5" inlet to 3.5" outlet exhaust tip. Priced per exhaust tip.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Mirror Chrome Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Show More Show Less
Turner - Dual Tip Double Wall Slash Cut Exhaust Tip - 3.0 Inlet - 3.5...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not vehicle specific. You MUST measure prior to purchasing!
Turner Motorsport - Corporate Logo
T#:9642117
Part#: 026732TMS02-16
Ships on Aug 17, 2026
Sale - Save 10% $ 133.99

This product was last offered at the strikethrough price on
06-14-2026

$ 120.59 USD
Free Shipping
Sale - Save 10%
$ 133.99

This product was last offered at the strikethrough price on
06-14-2026

$ 120.59 USD
Free Shipping

Dual Tip Wall Slash Cut Exhaust - 3.0 Inlet - 3.5 OD - Stepped Left - Mirror is the perfect upgrade for those looking to enhance their vehicle's aesthetics and performance. Crafted with a stunning mirror finish, this exhaust tip features a sleek slash cut and stepped left design that adds a touch of sophistication to your vehicle. Its double-wall construction ensures durability and a premium look, making it a must-have for any car enthusiast.

  • Enhanced Appearance: Mirror finish provides a polished, high-end look.
  • Durable Construction: Double-wall design for long-lasting performance.
  • Precision Fit: 3.0-inch inlet and 3.5-inch outer diameter for a perfect fit.
  • Stylish Design: Slash cut and stepped left design for a unique, aggressive appearance.
  • Easy Installation: Designed for straightforward installation on compatible vehicles.
Show More Show Less
Turner 3.5" Brushed Aluminum Swivel Exhaust Tips - Set of 2
Can be used on any 2.5" exhaust piping. Measure before ordering.
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Turner Motorsport - Corporate Logo
T#:21275555
Part#: 049478LA03-04KT
In Stock
Sale - Save 10% $ 113.98

This product was last offered at the strikethrough price on
06-14-2026

$ 102.58 USD
Free Shipping
Sale - Save 10%
$ 113.98

This product was last offered at the strikethrough price on
06-14-2026

$ 102.58 USD
Free Shipping

Set of 2 universal 2.5" inlet to 3.5" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Brushed Aluminum Finish
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Show More Show Less


Turner - 3.5" Black Chrome Swivel Exhaust Tips - Set of 2
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Turner Motorsport - Corporate Logo
T#:39802150
Part#: 049478LA03-02KT
In Stock
Sale - Save 10% $ 139.99

This product was last offered at the strikethrough price on
06-14-2026

$ 125.98 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 139.99

This product was last offered at the strikethrough price on
06-14-2026

$ 125.98 USD
Free Shipping on orders $49 and up

Set of 2 universal 2.5" inlet to 3.5" outlet exhaust tips.

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

Swivel feature for perfect alignment of the exhaust tips in the rear bumper
2.5" Inner Diameter
3.5" Outer Diameter
Black Chrome
Double Wall Construction
Angle Cut Style
Includes Stainless Steel Clamp

Show More Show Less
Turner 4" Universal Double Wall Exhaust Tip W/ Brushed Stainless Fini...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Not vehicle specific. You MUST measure prior to purchasing!
Turner Motorsport - Corporate Logo
T#:5175772
Part#: 026374TMS02-12
Ships on Aug 17, 2026
Sale - Save 3% $ 83.99

This product was last offered at the strikethrough price on
06-14-2026

$ 81.47 USD
Free Shipping
Sale - Save 3%
$ 83.99

This product was last offered at the strikethrough price on
06-14-2026

$ 81.47 USD
Free Shipping

Over the years, it is not uncommon for exhaust tips to be damaged and corroded, becoming a "sore spot" of your BMW. To remedy this unsightly feature, we now offer our very own exhaust tips! Featuring stainless steel construction and a simple, yet sporty design, this exhaust tip will look perfectly at home on almost any model.

Features & Specifications:

3.0" Inner Diameter
4.0" Outer Diameter
Brushed Finish
Double Wall Construction
Slant Cut Style
Includes Stainless Steel Clamp

Show More Show Less