BMW Engine Parts for BMW F87 M2 N55 3.0L

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

ECS Tuning Magnetic Oil Drain Plug - M12x1.5
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:361057
Part#: 002201ECS01A
In Stock
Sale - Save 25% $ 38.99

This product was last offered at the strikethrough price on
06-13-2026

$ 29.24 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 38.99

This product was last offered at the strikethrough price on
06-13-2026

$ 29.24 USD
Free Shipping on orders $49 and up
Turn your oil drain plug into an effective metal particle filter! This drain plug fits virtually all BMWs, and has a SUPER strong magnet built into it's tip, trapping iron and steel contaminants and safely removing them from the circulation.
Show More Show Less
Bav Auto Spark Plug Socket 12" x 5/8"
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:580385
Part#: B8800072
In Stock
Sale - Save 25% $ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 28.49 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 28.49 USD
Free Shipping on orders $49 and up
Magnetic insert holds the spark plug securely in place for easy installation. Works great on many twin can engines where the spark plugs are recessed deep in the cylinder head.
Burger Motorsports - Corporate Logo
T#:587715
Part#: MACSTS
In Stock
$ 51.99 USD
Free Shipping on orders $49 and up
Use this plug and play low frequency MAC solenoid if retrofitting a single turbo kit to your N54 or N55. Includes plug and play harness connector for no splicing!

Burger Motorsports - Corporate Logo
T#:21045489
Part#: BMS-OFC
In Stock
Starting at $ 89.00 USD
Free Shipping on orders $49 and up
Starting at $ 89.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports V2 billet aluminum oil filter cover is a metal upgrade that directly replaces your weak OE plastic cap for greater protection, better cooling, ease of removal/install, and looks great under the hood. The built-in 21mm hex and a 3/8" drive socket wrench fitting that does not require a special removal/install tool like the factory cap. Uses the OE oil filter, filter housing o-ring, and filter cage. Anodized for protection. This quality part is a must for any serious BMW owner. Replaces OEM part number 11427525334 - BMW Oil filter cover. Features and Benefits Solid aluminum design is much stronger than brittle plastic 21mm hex head + 3/8" drive socket wrench fitting Integrated heat sinks for better oil cooling Special tools are not required for removal/install like the factory cap Strong design won't fail under pressure Reuses OE filter cage and o-ring Anodized for protection Looks great under the hood Made in the USA
Show More Show Less

Burger Motorsports - Corporate Logo
T#:27171925
Part#: UNI-BMS-PIPLUGS
In Stock
$ 60.00 USD
Free Shipping on orders $49 and up
These dummy injectors fit in place of port injection fuel injectors to block the holes. Allows use to aluminum manifolds with port injection bungs without having to purchase fuel injectors. Plugs are EV14 injectors and measure 38mm or 1.5" from o-ring to o-ring.
Show More Show Less
-10AN ORB X 3/4" Hose Barb Fitting Assembly
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:584114
Part#: 003779ECS10
In Stock
Sale - Save 25% $ 39.99

This product was last offered at the strikethrough price on
06-13-2026

$ 29.99 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 39.99

This product was last offered at the strikethrough price on
06-13-2026

$ 29.99 USD
Free Shipping on orders $49 and up

Elevate your custom installation with the ECS -10AN O-Ring Boss fitting, a crucial component that connects your ECS Tuning Catch Can to a 3/4" ID hose. This fitting simplifies your plumbing setup, ensuring a seamless solution.

Featuring a pre-installed Viton O-ring, this fitting is engineered for excellence, providing a leak-proof seal that resists the effects of oil and fuel exposure, guaranteeing long-term durability.

The 3/4" nipple is thoughtfully designed with barbs to secure hose position effectively, minimizing the risk of hose disconnection. Keep in mind that clamps and hoses are available for separate purchase. These fittings are sold individually, with most installations requiring a pair of them.

Show More Show Less

ECS - Corporate Logo
T#:363147
Part#: 003296ECS01
Ships on Sep 29, 2026
Sale - Save 25% $ 152.99

This product was last offered at the strikethrough price on
06-13-2026

$ 114.74 USD
Free Shipping
Sale - Save 25%
$ 152.99

This product was last offered at the strikethrough price on
06-13-2026

$ 114.74 USD
Free Shipping
BMW uses a lot of plastic in their engine components to save weight and money. Unfortunately, plastic is damaged easily and the factory oil filter cap needs a special tool to remove.
Precision Raceworks Ethanol 360 Fittings - 5/16" (7.89mm)
Universal Product - Please confirm your fuel line size prior to ordering
Precision Raceworks - Corporate Logo
T#:37757295
Part#: 601-0240
Ships in 5 Business Days
$ 89.99 USD
Free Shipping on orders $49 and up
$ 89.99 USD
Free Shipping on orders $49 and up
The Precision Raceworks Ethanol 360 fuel line fittings are designed to work in almost any application where you have 5/16" or 7.89mm quick-connect fittings and need to add a flex fuel sensor. These fittings work with almost all ethanol sensors without the need to cut and splice or replace entire line sets. This is a perfect way to add an ethanol sensor to your vehicle while maintaining existing fuel lines.
Show More Show Less

Precision Raceworks - Corporate Logo
T#:4333508
Part#: 201-0091
In Stock
$ 39.99 USD
Free Shipping on orders $49 and up
Replaces individual coils found in the Precision Raceworks Ignition Kit.

Burger Motorsports - Corporate Logo
T#:43109033
Part#: BMS-HFSTI-FN55
Back Ordered
$ 199.00 USD
Free Shipping on orders $49 and up
Burger's replacement heavy-duty silicone turbo inlet replaces the narrow and crack-prone factory plastic unit with a higher flowing silicone inlet with billet aluminum fittings. Unlike other inlets, this inlet retains a larger flow straight from intake to turbo for improved boost response and increased turbo efficiency. While beneficial with the factory turbo, this inlet is a must-have with any larger than factory turbo and the perfect complement to the BMS N55 intake systems.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:26404907
Part#: 12MMSPG
In Stock
$ 35.00 USD
Free Shipping on orders $49 and up

Spark Plug Gapper Tool BMS Billet is essential for accurately adjusting the gap of spark plugs. This precision tool ensures that each plug is set to the exact specifications required for optimal engine performance. Made in the USA, it features a 12mm plug thread size, making it suitable for a wide range of applications.

  • Precision Adjustment: Allows for accurate gap adjustments to ensure optimal spark performance and engine efficiency.
  • Speed and Efficiency: Streamlines the process of gapping plugs while maintaining high precision, saving time and effort.
  • High-Quality Construction: Crafted from billet materials for durability and reliability, ensuring long-term use.
  • Lifetime Replacement Program: Comes with a lifetime replacement guarantee, reflecting confidence in the tool's quality and performance.

Upgrade your spark plug maintenance with the Spark Plug Gapper Tool BMS Billet for a reliable and precise solution.

Show More Show Less
ECS - Corporate Logo
T#:5858461
Part#: 8PK1390
Back Ordered
$ 52.99 USD
Free Shipping on orders $49 and up
Replaces BMW # 11287628661 Kevlar-reinforced belts experience less elongation over time minimizing the amount of belt adjustment needed as well as offering a higher shock and impact resistance compared to OEM style belts.
Show More Show Less


Precision Raceworks - Corporate Logo
T#:38161701
Part#: 101-0257
In Stock
$ 49.99 USD
Free Shipping on orders $49 and up

Replacement Fuel Filter Element - 6 Micron | Precision Raceworks is designed for BMW and high-performance fuel systems, ensuring optimal fuel flow and superior filtration. This high-efficiency 6-micron filter element effectively captures contaminants, preventing debris from reaching fuel injectors and maintaining peak engine performance.

Regular maintenance of your fuel filter is essential for maximizing fuel system efficiency. Whether for racing or daily driving, this replacement element keeps your fuel system running at its best.

  • 6-micron filtration – Removes fine particles and contaminants to protect engine components
  • High-performance compatibility – Designed for use with Precision Raceworks inline fuel filters
  • Optimized fuel flow – Maintains consistent fuel delivery for peak performance
  • Durable construction – Engineered for long-lasting reliability in high-demand applications
  • Easy replacement – Simple installation for routine maintenance
  • Ideal for both street and track use – Ensures clean fuel supply for all driving conditions

Fuel Filter Replacement Guidelines:

  • Racing applications: Inspect at least twice per season and replace as needed
  • Daily driving: Inspect at least once a year or every 6,000 miles, replacing as necessary

Ensure your BMW fuel system stays clean and efficient with the Replacement Fuel Filter Element - 6 Micron | Precision Raceworks, the ultimate choice for maintaining performance and reliability.

Show More Show Less
Bav Auto Tools - Corporate Logo
T#:580444
Part#: B8800139
Ships on Sep 30, 2026
Sale - Save 5% $ 203.99

This product was last offered at the strikethrough price on
05-03-2026

$ 193.79 USD
Free Shipping
Sale - Save 5%
$ 203.99

This product was last offered at the strikethrough price on
05-03-2026

$ 193.79 USD
Free Shipping
Used in removal and installation of the front crankshaft seal on BMW N55 engines, a common job that you can save yourself a ton of money doing at home.
ECS - Corporate Logo
T#:383333
Part#: 003779ECS06KT
In Stock
Sale - Save 25% $ 95.99

This product was last offered at the strikethrough price on
06-13-2026

$ 71.99 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 95.99

This product was last offered at the strikethrough price on
06-13-2026

$ 71.99 USD
Free Shipping on orders $49 and up
If you don't wish to fabricate intricate brackets to mount your ECS Baffled Oil Catch Can we have the solution. ECS's three-piece bracket kit includes two options for securing the catch can. Choose from either a flat parallel mounting plate or a bent 90° mounting plate to give you 360° rotation for an infinitely adjustable mounting location.
Show More Show Less

Bav Auto Fuel Injector Removal/Installation Tool - N55
For E - Chassis N55
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:580388
Part#: B8800075
Ships on Feb 4, 2027
Sale - Save 20% $ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.99 USD
Free Shipping
Sale - Save 20%
$ 109.99

This product was last offered at the strikethrough price on
05-03-2026

$ 87.99 USD
Free Shipping
This tool takes the stress and difficulty out of removing and installing your N55 fuel injectors.

Precision Raceworks - Corporate Logo
T#:38094311
Part#: 201-0188
In Stock
$ 54.99 USD
Free Shipping on orders $49 and up

Port Injection Fuel Line For Top Mount Fuel Rail - N54 N55 is designed for seamless compatibility with most aftermarket intake manifolds featuring top mount port injection. It works with leading brands such as Black Market Parts, BKC, BMS, Sharp Custom, Doc Race, and more, ensuring a high-performance fuel delivery solution for BMW N54 and N55 engines.

Constructed with premium 6061 aluminum and anodized for 100% E85 compliance, this fuel line is engineered for durability and optimal fuel flow. The female quick connectors feature an air hose-style quick connect with dual seals (primary and secondary) to eliminate any risk of fuel leaks. Precision Raceworks utilizes Smooth Bore PTFE hose, a trusted component in high-end E85 applications worldwide.

This plug-and-play solution is fully compatible with both factory and aftermarket fuel lines, providing an easy, reliable way to supply fuel to the port injection system of your upgraded intake manifold.

  • Seamless fit – Compatible with most aftermarket top mount port injection manifolds
  • Durable construction – Machined from 6061 aluminum and anodized for E85 compatibility
  • Leak-proof design – Dual-seal quick connectors for maximum fuel safety
  • High-performance fuel delivery – Utilizes Smooth Bore PTFE hose for optimal flow
  • Easy installation – Direct plug-and-play with factory and aftermarket fuel lines
Show More Show Less
Bav Auto Timing Tool Kit - N51 N52 N54 N55 S55
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:580414
Part#: B8800107
Ships on Oct 20, 2026
Sale - Save 5% $ 371.99

This product was last offered at the strikethrough price on
05-03-2026

$ 353.39 USD
Free Shipping
Sale - Save 5%
$ 371.99

This product was last offered at the strikethrough price on
05-03-2026

$ 353.39 USD
Free Shipping
Sets cam, valve & VANOS timing on BMW N51, N52, N53, N54 & N55 engines. Includes camshaft fixture with hold-down bolts, 3 alignment gauges and TDC pin. A must when removing and replacing cylinder heads on these engines.
Show More Show Less

Precision Raceworks Ethanol 360 Fittings - 3/8" (9.49mm)
Universal Product - Please confirm your fuel line size prior to ordering
Precision Raceworks - Corporate Logo
T#:37892104
Part#: 601-0288
In Stock
$ 89.99 USD
Free Shipping on orders $49 and up
$ 89.99 USD
Free Shipping on orders $49 and up
The Precision Raceworks Ethanol 360 fuel line fittings are designed to work in almost any application where you have 3/8" (9.49mm) quick-connect fittings and need to add a flex fuel sensor. These fittings work with almost all ethanol sensors without the need to cut and splice or replace entire line sets. This is a perfect way to add an ethanol sensor to your vehicle while maintaining existing fuel lines.
Show More Show Less
Precision Raceworks - Corporate Logo
T#:38161736
Part#: 201-0405
In Stock
$ 24.99 USD
Free Shipping on orders $49 and up
This fitting allows you to install a 1/8" npt port anywhere you have an existing quick connect Compatible with the Motiv 0-10 Bar pressure sensor

Precision Raceworks - Corporate Logo
T#:3786918
Part#: 201-0002
In Stock
$ 69.99 USD
Free Shipping
$ 69.99 USD
Free Shipping
Precision Raceworks' BMW N54 / N55 replacement spark plug wires are the same plug wires that are included in their High-Performance Ignition Kits 601-0021 & 601-0021-1

Bav Auto Fuel Injector Installer / Remover - N20/N55
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:580389
Part#: B8800076
Ships on Oct 20, 2026
Sale - Save 10% $ 106.99

This product was last offered at the strikethrough price on
05-03-2026

$ 96.29 USD
Free Shipping
Sale - Save 10%
$ 106.99

This product was last offered at the strikethrough price on
05-03-2026

$ 96.29 USD
Free Shipping
This enables you to easily remove and install fuel injectors on BMW N20 and N55's produced from 2/2011 and up with direct injection.
ECS Tuning Low Temp Oil Thermostat - BMW N54 N55 3.0L (2008+ Models) ...
10X Entries Into Our F80 M3 Sweepstakes
For 2008 and up models only
ECS - Corporate Logo
T#:6924321
Part#: 090743ECS09
In Stock
Sale - Save 25% $ 79.99

This product was last offered at the strikethrough price on
06-14-2026

$ 59.99 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 79.99

This product was last offered at the strikethrough price on
06-14-2026

$ 59.99 USD
Free Shipping on orders $49 and up
Is your N54/N55 oil temp running too high? The most likely cause is a faulty OE oil thermostat. With this ECS Low Temp Oil Thermostat Kit, you can keep your engine happy with oil temps holding between 194F (90c) to 230F (110c). This is the perfect solution for both higher milage models and models that have been tuned or further upgraded with performance turbochargers, Kit includes: Oil Thermostat Bung Oil Thermostat Spring Oil Thermostat Shaft Assembly
Show More Show Less
Burger Motorsports - Corporate Logo
T#:21933055
Part#: N54PIIMINJECT
In Stock
$ 988.00 USD
$ 988.00 USD

BMW N54 Port Injection Intake Manifold With 750cc Injectors And Fuel Line Kit - Phoenix Racing is a high-performance upgrade engineered to replace the stock plastic intake manifold on BMW N54 engines. Constructed from durable, lightweight aluminum, this manifold increases airflow and strength, delivering reliable performance for both street and track applications. Integrated with top-mount port injection bungs, this manifold ensures optimal fuel delivery and spray patterns for maximum efficiency. The Phoenix Racing kit includes calibrated 750cc injectors and a plug-and-play fuel line, making it ideal for drivers aiming for high horsepower and seamless installation. Available through Turner Motorsport.

  • Replaces the factory plastic manifold with high-strength aluminum for increased durability and performance
  • Supports increased airflow to enhance engine power and efficiency
  • Integrated top-mount port injection bungs optimize fuel injector spray and delivery
  • Includes calibrated 750cc injectors and plug-and-play fuel line for a complete port injection solution
  • Multiple expansion vacuum ports support blow-off valves, boost gauges, Hobb’s switches, and more
  • High-quality, high-temperature o-rings provide lasting durability and reliability
  • Exclusively available through Turner Motorsport, ensuring trusted quality and service
Show More Show Less


Bav Auto Fuel Injector Seal Installer & Remover - N54/N63
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:580445
Part#: B8800140
In Stock
Sale - Save 3% $ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 118.33 USD
Free Shipping
Sale - Save 3%
$ 121.99

This product was last offered at the strikethrough price on
05-03-2026

$ 118.33 USD
Free Shipping
This is has been specifically designed to remove and install the seals on your fuel injectors without damaging either the seals or injectors themselves.
Mishimoto - Corporate Logo
T#:597051
Part#: MMOCCLA
In Stock
$ 127.99 USD
Free Shipping
$ 127.99 USD
Free Shipping
WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less

Bav Auto Media Blaster Kit - BMW N20 N54 N55
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:582473
Part#: B1100008
In Stock
Sale - Save 8% $ 329.99

This product was last offered at the strikethrough price on
05-03-2026

$ 303.26 USD
Free Shipping
Sale - Save 8%
$ 329.99

This product was last offered at the strikethrough price on
05-03-2026

$ 303.26 USD
Free Shipping
Carbon building up in your intake ports? Take care of it quick and easy with this DIY media blaster kit from Bav auto. This walnut shell media blaster kit contains everything you need to effectively clean and de-carbon the intake ports and valves on your turbocharged N20, N54, or N55 BMW engine. Taking your vehicle to the dealer to have this service performed, you would be looking at a cost of around $1000 or more! This kit saves you money and can be used as many times as you need to ensure perfectly clean intake ports for optimum airflow and performance. Included in this kit: 20lb pressure feed media blaster including water separator and pressure gauge blasting wand N54/N55 port adapter (attaches to your shop vac to catch the used media and deposits) 25lb package of walnut shell blasting media Use of this kit requires a medium sized air compressor (suggested minimum 20-30 gallon tank, 4.0 CFM @ 90psi), common "shop vac" and full hearing and eye protection. We recommend the use of a remote starter switch. Please note: Intake manifold gasket set and Throttle body gasket, sold separately, must be replaced when removing intake manifold.
Show More Show Less

Iwis - Corporate Logo
T#:375888
Part#: 11417584079
In Stock
$ 64.99 USD
Free Shipping on orders $49 and up
Should be replaced any time the oil pump is removed or chain noise is detected
Bav Auto Tools - Corporate Logo
T#:580412
Part#: B8800104
In Stock
Sale - Save 5% $ 147.99

This product was last offered at the strikethrough price on
05-03-2026

$ 140.59 USD
Free Shipping
Sale - Save 5%
$ 147.99

This product was last offered at the strikethrough price on
05-03-2026

$ 140.59 USD
Free Shipping
For removal and installation of the rear crankshaft seal on BMW N51, N52 and N54 engines.

Borescope Camera with Light For Phone
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:32450134
Part#: PHONEBORESCOPE
In Stock
Sale - Save 3% $ 58.99

This product was last offered at the strikethrough price on
05-03-2026

$ 57.22 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 58.99

This product was last offered at the strikethrough price on
05-03-2026

$ 57.22 USD
Free Shipping on orders $49 and up

The Borescope Inspection Camera offers 1920P HD resolution, a flexible 7.9mm probe, and a 16.4ft semi-rigid cable, making it ideal for inspecting hard-to-reach areas. Easily connect to IOS and Android devices, and use the IP67 waterproof probe for various applications, including automotive, plumbing, and home inspections.


Key Features:

  • 1920P HD Resolution: Capture clear images and high-quality video at 1920x1440 resolution.
  • Easy Connection: Connect quickly to IOS 9.0+ and Android 7+ devices via the 'SUP-ANESOK' app.
  • Semi-Rigid Cable: 16.4ft cable offers a mix of flexibility and rigidity for precise inspections.
  • Waterproof Probe: IP67-rated, capable of operating underwater up to 3.28 feet for 1 hour.
  • Wide Applications: Suitable for automotive, plumbing, and home inspections, with adjustable brightness for low-light environments.


Includes:

  • Borescope Camera
  • Android Adapter
  • Lightning Port Adapter
  • USB Type-C Connector
  • 16.4 ft. Semi-Rigid Cable
  • Magnet
  • Hook
  • Mirror
  • Protective Cap
  • Manual


WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Show More Show Less
Bav Auto Tools - Corporate Logo
T#:580431
Part#: B8800124
Ships on Sep 30, 2026
Sale - Save 15% $ 178.99

This product was last offered at the strikethrough price on
05-03-2026

$ 152.14 USD
Free Shipping
Sale - Save 15%
$ 178.99

This product was last offered at the strikethrough price on
05-03-2026

$ 152.14 USD
Free Shipping
For installation and removal of pressure springs on intermediate levers of valve train. Ensures quick, easy and safe handling of these high force springs.

1/2-inch Drive 17mm VANOS Flush-Cut Socket
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:394201
Part#: 012016ECS02A
In Stock
$ 28.99 USD
Free Shipping on orders $49 and up

Bav Auto Oil Filter Housing Cap Removal Tool - 1/2" Drive
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:580338
Part#: B8800006
In Stock
Sale - Save 25% $ 33.99

This product was last offered at the strikethrough price on
05-03-2026

$ 25.49 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 33.99

This product was last offered at the strikethrough price on
05-03-2026

$ 25.49 USD
Free Shipping on orders $49 and up
Used to easily remove your oil filter housing cap without damaging it.
Precision Raceworks - Corporate Logo
T#:38195449
Part#: 501-0043
In Stock
$ 159.99 USD
Free Shipping on orders $49 and up
Adjust your fuel pressure as needed. Thanks to the 1:1 boost reference, fuel pressure will increase as boost pressure increases, ensuring fuel delivery remains optimal under all conditions.
Iwis - Corporate Logo
T#:36981080
Part#: 90001301
In Stock
$ 314.36

This product was last offered at the strikethrough price on
05-04-2026

$ 304.83 USD
Free Shipping
$ 304.83 USD
Free Shipping
Prevent costly failure with this IWIS Engine Oil Pump Chain Kit! This kit contains all of the basic items needed to service your oil pump drive system and prevent failure long before it occurs. Chains can stretch and chain guides and tensioners can wear out, leading to the chain skipping teeth. This prevents the oil pump from being driven at the proper speeds. If not addressed, the chain could begin to "slip" over the gears, failing to drive the oil pump. When this occurs, oil pressure will drop suddenly, failing to properly lubricate sensitive internal engine components such as main bearings, rod bearings, and camshaft ledges and lobes, resulting in severe scoring and eventual engine failure.
Show More Show Less


Precision Raceworks - Corporate Logo
T#:38161752
Part#: 201-0148
Ships in 6 Business Days
$ 49.99 USD
Free Shipping on orders $49 and up
Precision Raceworks' Port Injection Fuel Line is designed to be compatible with most plate-style port injection kits on the market. Crafted from high-quality 6061 aluminum, all connections are precisely machined and fully compatible with E85 fuel. The female connectors feature dual seals, ensuring a leak-free performance. The fuel line itself is constructed from smooth-bore PTFE hose, a proven choice for numerous E85 applications. This plug-and-play solution seamlessly integrates with both factory and aftermarket fuel rails, offering a hassle-free way to deliver fuel to your port injection system.
Show More Show Less
Mishimoto - Corporate Logo
T#:372557
Part#: MMOCCCF
In Stock
$ 162.99 USD
Free Shipping
$ 162.99 USD
Free Shipping
Universal kit with a catch can and rubber hose; for retrofitting on a variety of vehicles. Carbon fiber catch can prevents a harmful buildup of oil inside of the turbocharger, intake manifold, intercooler and piping. Separates oil particles from PCV/CCV air Defends intercooler, intake system, and essential components from oil blow-by Made from lightweight carbon fiber Compact design makes for easy engine bay placement Checking fluid levels made easy with built in sight tube Comes complete with mounting bracket, hose, all necessary clamps, fittings, and mounting hardware Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less
Iwis - Corporate Logo
T#:43378595
Part#: 11317584723
Ships in 2 Business Days
$ 100.99

This product was last offered at the strikethrough price on
05-07-2026

$ 97.99 USD
Free Shipping on orders $49 and up
$ 97.99 USD
Free Shipping on orders $49 and up
Over time, your engine timing components begin to wear out. Tensioners weaken, chains can stretch, and timing chain guides can wear down. All of these lead to the possibility of the timing chain jumping teeth on the sprockets, causing your timing to shift. This could result in rough idle and reduced engine power, or even complete engine failure. Prevent damage to your engine with new timing components, such as this IWIS timing chain tensioner. Note, we recommend replacing timing components every 100K miles, or sooner, depending on the condition of the timing components.
Show More Show Less

Precision Raceworks - Corporate Logo
T#:40004858
Part#: 201-0261
Back Ordered
$ 1,799.00 USD
Free Shipping on orders $49 and up
The Precision Raceworks N55/S55 Upgraded DI Injectors are designed for customers looking to push the limits without port injection (or in addition to port injection). Our high flow injectors were developed in a partnership with NHP, taking advantage of resources offered by both companies to produce the highest quality and highest flowing direct injector upgrade ever for the N55 engine. These high flow injectors flow 85% over stock! Each injector is tested and calibrated using state of the art high pressure flow calibration equipment and then matched to a set of 6. Installation of these is a snap and is as simple as replacing your injectors, a little coding, and then checking a checkbox!
Show More Show Less

Precision Raceworks - Corporate Logo
T#:38161679
Part#: 201-0410
Ships in 8 Business Days
$ 49.00 USD
Free Shipping on orders $49 and up
Ideal for enthusiasts looking to optimize their vehicle’s fuel system, this ethanol sensor harness delivers precision and reliability for high-performance applications.
Precision Raceworks - Corporate Logo
T#:38094337
Part#: 201-0049
In Stock
$ 99.99 USD
Free Shipping on orders $49 and up
Precision Raceworks' BMW Secondary Pump Activation Harness is the top choice among pump manufacturers and tuners for controlling auxiliary fuel pumps. This kit is considered the most complete and highest quality kit on the market and is sold private label to many BMW pump manufacturers. That is why this harness is the #1 method of secondary pump control on the market around the globe.
Show More Show Less

Precision Raceworks - Corporate Logo
T#:26205125
Part#: 601-0149-1
Ships in 8 Business Days
$ 479.99 USD
Free Shipping on orders $49 and up
Rid your BMW's N55 of misfires, sluggish throttle response, rough idle, and power loss with Precision Raceworks' High-Performance Ignition Kit! Precision Raceworks' ignition kit is designed to fit any vehicle with an N55 engine and offers the highest output of any kit on the market! Featuring 100% Plug-&-Play connections, low resistance 50ohm/ft proprietary plug wires, and design technology from Marine and Aerospace applications, these coils are guaranteed to output consistent high voltage and current for optimal ignition system performance and reliability. Every component in this kit meets or exceeds OEM quality and features premium seals for dust and water resistance. While coils do not directly increase horsepower, stock BMW coils can wear out quickly, resulting in underperforming voltage and current output. This often leads to weaker spark intensity and reduced power output. Due to the increased voltage and current output, many customers have seen as much as 20+ whp/wtq gained by switching to Precision Raceworks coils over all other coils on the market! By upgrading to Precision's Performance Ignition Kit, spark quality can be restored, and lost power regained often with the additional power beyond what other coils provide. No software tune is required for installation or operation, but if desired, coil output can be increased to 118mJ from most software tuning companies!
Show More Show Less
Burger Motorsports - Corporate Logo
T#:27171935
Part#: IRTHERM
Back Ordered
Starting at $ 318.99 USD
Free Shipping on orders $49 and up
Starting at $ 318.99 USD
Free Shipping on orders $49 and up
Precise Oil Temperature Control for Your BMW Upgrade your BMW N20, N26, N51, N52, N53, N54, N55, and S55 engine's oil temperature control with Improved Racing's high-performance oil cooler adapter. Designed to address flaws in the factory's restrictive oil cooler adapter and faulty internal flow control valve, this upgrade ensures precise oil temperature control. Improved Racing's thermostat provides quick engine warmup, prevents overcooling, and delivers full oil cooling capacity on demand. Trusted by professional race teams around the globe, Improved Racing's thermostats have proven highly reliable, are backed by a lifetime warranty, and are made in the USA. Option to Use the Factory Oil Cooler and Lines The optional factory oil line adapter allows you to use the factory oil cooler lines for a simple, plug-and-play installation. For maximum performance, the factory oil cooler and lines may be replaced with an aftermarket cooler and AN lines using the AN adapter fittings (-10AN line size is recommended). ​Please note that some applications, such as most BMW SUV's, use a water-to-oil heat exchangers. These applications require plugging the coolant supply and return ports, as well as adding an external air-to-oil cooler and lines (factory or aftermarket). Please note the Oil cooler adapter cannot be used without an oil cooler.
Show More Show Less

Walnut Shell Blast Media (18/40 Fine Grade) - 50 lbs
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:582690
Part#: B1100050
In Stock
Sale - Save 15% $ 91.99

This product was last offered at the strikethrough price on
05-03-2026

$ 78.19 USD
Sale - Save 15%
$ 91.99

This product was last offered at the strikethrough price on
05-03-2026

$ 78.19 USD
Used for carbon buildup removal during walnut shell blasting

1/2-inch Drive 18mm VANOS Flush-Cut Socket
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:394202
Part#: 012016ECS03A
In Stock
Sale - Save 16% $ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 32.08 USD
Free Shipping on orders $49 and up
Sale - Save 16%
$ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 32.08 USD
Free Shipping on orders $49 and up
1/2-inch Drive VANOS Flush-Cut 17mm & 18mm Sockets
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:398953
Part#: 012016ECS0KTKT
In Stock
Sale - Save 3% $ 67.99

This product was last offered at the strikethrough price on
06-14-2026

$ 65.94 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 67.99

This product was last offered at the strikethrough price on
06-14-2026

$ 65.94 USD
Free Shipping on orders $49 and up


Precision Raceworks - Corporate Logo
T#:38094305
Part#: 601-0260
Back Ordered
$ 64.99 USD
Free Shipping on orders $49 and up
For enthusiasts seeking to regulate fuel pressure at the engine without the complexities of manual adjustments or the need for a 1:1 boost reference, a preset fuel pressure regulator offers an ideal solution. These compact regulators are designed for straightforward installation and consistent performance.
Show More Show Less
Precision Raceworks - Corporate Logo
T#:38094309
Part#: 201-0274
Ships in 5 Business Days
$ 24.99 USD
Free Shipping on orders $49 and up
The Precision Raceworks AN6 Male Flare/ORB to 5/16" (7.89mm) Female Quick Connect is a premium component designed for fluid or fuel systems. The AN6 male flare/ORB fitting ensures a secure connection, while the 5/16" (7.89mm) female quick-connect fitting allows for fast, tool-free disconnection and reconnection. This setup guarantees a reliable, leak-proof seal, ideal for high-performance systems. Would you like assistance sourcing this fitting or other Precision Raceworks components?
Show More Show Less