CSF for BMW X Series G07 X7 (2019+)

CSF Racing Performance "Super Manifold" - BMW G20/22 G30 G0...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! CARB certified for sale in all 50 states

T#:2498426

Part#: 8200

EO#: D-770

Ships in 3 Business Days

$ 4,299.00 USD

Add to Wish List

Qty

$ 4,299.00 USD

Add to Wish List

Designed in-joint by CSF, VF Engineering, and CPC (Custom Plenum Creations) for optimal performance, reliability, and cooling, this feature-rich intake manifold is the Tuner's dream manifold! The newer 2nd gen B58 engine, found in the Mk5 Supra, has already been proven to be an incredible platform for performance enthusiasts – taking the performance and motorsports industry by storm in just a couple of years since its release. In a short amount of time, performance enthusiasts have already started to more than double the stock engine output – now pushing through 700whp, 800whp, and looking into the elusive 4 digit 1,000whp mark. The OEM water-cooled charge air cooler intake manifold for the B58 engine is adequate in cars with little or no modifications, but starts to really show an apparent weakness in cars that have bolt-on modifications, turbo upgrades, increased fueling (such as port injection), and performance tuning. Also, the OEM intercooler system has been known to suffer from heat soak in demanding racing conditions such as time attack, endurance racing, drag racing, and drifting, as well as spirited driving on the street. This can cause the car to pull timing out of the engine due to high intake air temperatures (IATs), and then can cause “limp mode” once temperatures reach a certain threshold, as the vehicle’s ECU will cut power to protect the engine. CSF conducted extensive testing on the dyno with R&D partner VF Engineering to ensure performance improvements before going into production with the new manifold. CSF performed over 50 dyno runs on the same car, on the same day, in relatively hot ambient conditions (~90°F) comparing the performance of the CSF Charge-Air Cooler Manifold to the OEM. Both the CSF and OEM cooler went through roughly 25 back-to-back dyno pulls every 30 seconds to measure the performance of the car overtime, resistance to heat soak, recovery time, and the effect on the turbo system duty cycle.

Show More Show Less

CSF B58 Thermal Rejection Competition Spacer - BMW G20/22 G30 G01/02,...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! Designed to be used with CSF's B58 Super Manifold (CSF #8200 - T#2498426 or #8200B - T#9868813)

T#:8154081

Part#: 8200S

Ships in 1 Business Day

$ 299.00 USD

Add to Wish List

Qty

$ 299.00 USD

Add to Wish List

CSF is continually updating and adding new products In an effort to help customers achieve the highest level of competition in motorsports. CSF is pleased to release the latest B58 performance product. The CSF B58 Thermal Rejection Competition Spacer (CSF #8200S). The CSF B58 Thermal Rejection Competition Spacer is the next level upgrade for the B58 Super Manifold (CSF #8200 - ES4389640). Made from KIYLEX®, a patented revolutionary high-performance final stage polymer. KIYLEX® is as strong as aluminum and can withstand temperatures up to 1100°F. This spacer is designed to insulate the intake manifold from conductive heat transfer from the cylinder head. This thermal barrier reduces manifold temperatures which helps lower Intake Air Temperatures (IATs), improve charge air cooler efficiency, and combats heat soak. CSF is the exclusive distributor for the KIYLEX® Intake Manifold Spacer for the B58 Motor. Made from KIYLEX® – A patented revolutionary high-performance final stage polymer Spacer Height = 6.5mm Acts as a thermal barrier that dissipates heat between the cylinder head and intake manifold Proven to lower intake manifold temperatures by up to 15% Lowers Intake Air Temps (IATs) Can withstand temps up to 1100°F and is as strong as Aluminum Self-Sealing and do NOT require gaskets, silicon products, or sealing agents of any kind. Tested on @peppa_aka_skull’s (1000HP) A90 Supra by Visconti Tuning Includes installation hardware and instructions Highly recommended for Drag/Roll-Racing Applications where vehicles typically sit in staging lanes in-between racing Limited Lifetime Warranty Will NOT work with the OEM Manifold The addition of the Thermal Rejection Spacer is especially useful for Drag/Roll-Racing Events where vehicles typically sit in staging lanes in-between racing. This causes extreme heat soak to the liquid-to-air manifold as there is not sufficient airflow passing over the front mount heat exchanger when the car is idling (which is responsible for cooling the charge air fluid that runs through the manifold). This causes the starting IATs on subsequent runs to be higher than on the initial run. The B58 Super Manifold is made from Billet Aluminum and 100% Tig Welded for strength, which allows it to be able to withstand higher boost pressures compared to the OEM plastic manifold. Aluminum has higher thermal conductivity than plastic resulting in a higher rate of heat transfer between the cylinder head and manifold. Adding the Thermal Rejection Spacer reduces heat transfer between the two metal components (cylinder head & manifold). The spacer absorbs the heat from the cylinder head and dissipates it rather than transferring it to the manifold. The CSF Thermal Rejection Competition Spacer was designed for vehicles competing in motorsports who demand the absolute best cooling in order to gain a competitive edge. With that being said, there are significant advantages to adding this spacer upgrade to any vehicle with the CSF B58 Super Manifold installed.

Show More Show Less

CSF Universal Large Single-Pass Oil Cooler - Universal Application ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Universal fitment design - modifications may be necessary to run this cooler

T#:53608839

Part#: 8371

Ships in 3 Business Days

$ 499.00 USD

Add to Wish List

Qty

$ 499.00 USD

Add to Wish List

CSF redesigned this cooler and went with a more traditional inlet/outlet orientation. The new single pass design features high efficiency and high durability, but with vertically oriented inlet and outlet connections.

Show More Show Less

CSF Racing "Race X" Intake Manifold - Thermal Black Finish ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:23648671

Part#: 8400B

Ships in 3 Business Days

$ 5,995.00 USD

Add to Wish List

Qty

$ 5,995.00 USD

Add to Wish List

When CSF released the Gen 2 B58 “Super Manifold” for G-Chassis BMW and Supra, it was a smash hit (CSF #8200/8200B). It quickly became the go-to manifold for racers and enthusiasts looking to get the most out of their B58. Over the past two years, people have been pushing the limits of the Gen 2 B58. While the Gen 2 B58 “Super Manifold” has held up amazingly to countless 1000hp builds, customers still wanted more. Well, the wait is over and CSF is proud to introduce the “Race X” Charge-Air-Cooler manifold. Another industry-leading design by the trio of CSF, VF Engineering, and Custom Plenum Creations. The Race X Manifold has many of the features and specs as the Super Manifold in addition to some new race-focused features. The Race X Manifold is designed for high-level motorsports competition and racing applications. The limits of the current Super Manifold are very high and more than enough for many enthusiasts, tuners, and racers. However, those looking to push their Gen 2 B58s to the maximum have been asking for more. Race X features a 25% larger core, additional parameter ports, and an optimized water flow system. The manifold can be used in either dual or single-pass configurations and features a new front port that has been optimized for ice box setups. This is the most versatile and largest manifold available on the market and has been race-tested on some of the fastest B58-powered drag cars in the world. Biggest/Best Core in the Industry Once you get into that 1000hp+ range on the B58, most aftermarket manifolds have reached their limits in terms of flow and cooling capacity. To resolve both limitations, CSF increased the size of the core by 25% over the #8200. The larger core has 15 cooling rows (vs 12 rows on the CSF #8200) and keeps up with the air flow demand while also increasing the cooling capacity. Dual or Single Pass CSF specifically designed the front water end plate of the manifold to allow for a single pass setup or ice box setup. This -16 ORB bung found on the front water plate is the largest available on any aftermarket B58 manifold (competitor’s unit uses a -12 fitting). CSF has teamed up with industry-leading fitting and hose experts Brown and Miller (BRMS) to optimize the water flow out of the front plate. CSF recommends using the following BRMS fittings with a maximum fitting angle of 120 degrees. BRMS is recommended by CSF because there are no flow restrictions on their fittings and are highly regarded as the best in the motorsport industry. Top Feed Port Injection with Included Fuel Rail The CSF Manifold includes an extruded fuel rail which attaches to the outlet side of the manifold. The AN-8 fuel rail comes with a -8 internal hex plug fitting. This allows you to run a returnless fuel system or a full loop setup. Fuel rail aperture for each cylinder is an optimized 7mm opening for compatibility with most commonly used high performance injectors CSF recommends using Injector Dynamics (ID) injectors for the best performance – the most commonly used injector for this engine has been ID model # 1050.34.14.14.6 (qty 6) Anodized CNC machined injector hats (qty 6) are included in the supplied hardware kit to accommodate short height injectors aka “shorties” Individual Nitrous / Methanol Injector Ports A 1/8' NPT port on each cylinder runner can be used for nitrous or methanol injection. The CSF manifold allows for maximum spray control and even spray distribution throughout the engine. A nitrous system set-up specifically for the CSF manifold is available from industry leaders Nitrous Express through Titan Motorsports. Expanded Vacuum and Parameter Pad CSF has included a port pad into the machining of the tank on the manifold inlet side. The ports can be used to measure additional parameters or as an additional vacuum source. The Race X Manifold has two additional 1/4' NPT ports to go along with the standard three 1/8' NPT ports. Each port can be plugged with the included hardware kit if they are not used. Easy Access to Spin-Off Oil Filter CSF incorporated a recessed design towards the back of the manifold that allows easy access to the spin-off oil filter. This means you do not have to remove your manifold every time you want to change your oil. Air Inlet Divider The inclusion of an air divider welded into the inlet side tank of the manifold is another exclusive feature of the CSF manifold. With the length of the manifold, the engineers at VF Engineering wanted to make sure that the volume and velocity of air was consistent to all cylinders. The inlet has an air divider to ensure the best possible airflow and equal cooling performance to each cylinder. Airflow to the back of the manifold (cylinders four, five, and six) should be equal to the airflow to the front of the manifold (cylinders one, two, and three) for the best possible performance. Breather Ports for Inlet/Outlet of Water Tanks Two 1/8' NPT ports are located on the top of the back water plate. These ports can be used to measure inlet/outlet water temps as well as used as breather ports to help in the bleeding procedure. 1/8th NPT plugs come included in the supplied hardware kit. Please follow OEM BMW or Toyota bleeding procedure which takes roughly 15 minutes to complete. Slotted Mounting Tabs Positioning the manifold in the engine bay is fairly straightforward. However, it can be a little frustrating to get the bolt holes on the intake side mounting tabs lined up perfectly. After doing a few test fittings CSF realized this could be resolved by slotting the mounting tabs. This allows the bolts to be installed before final positioning adjustments and makes installation a bit easier. Thermal Rejection Competition Spacer Made from KIYLEX®, a patented revolutionary high-performance final stage polymer. KIYLEX® is as strong as aluminum and can withstand temperatures up to 1100°F. This spacer is designed to insulate the intake manifold from conductive heat transfer from the cylinder head. This thermal barrier reduces manifold temperatures which helps lower Intake Air Temperatures (IATs), improve charge air cooler efficiency, and combats heat soak. CSF is the exclusive distributor for the KIYLEX® Intake Manifold Spacer for the B58 Motor. The addition of the Thermal Rejection Spacer is especially useful for Drag/Roll-Racing Events where vehicles typically sit in staging lanes in-between racing. This causes extreme heat soak to the liquid-to-air manifold as there is not sufficient airflow passing over the front mount heat exchanger when the car is idling (which is responsible for cooling the charge air fluid that runs through the manifold). This causes the starting IATs on subsequent runs to be higher than on the initial run. The CSF Manifold is made from Billet Aluminum and 100% TIG Welded for strength, which allows it to be able to withstand higher boost pressures compared to the OEM plastic manifold. Aluminum has higher thermal conductivity than plastic resulting in a higher rate of heat transfer between the cylinder head and manifold. Adding the Thermal Rejection Spacer reduces heat transfer between the two metal components (cylinder head & manifold). The spacer absorbs the heat from the cylinder head and dissipates it rather than transferring it to the manifold. Hardware Kit, Well Thought-Out Instruction Manual The supplied hardware kit includes all of the brackets, bolts, washers, and CNC machined fittings for installation. This is an industry-exclusive feature to the CSF x VF Engineering design, and was extremely difficult to not only engineer, but to manufacture as well. An array of items come vacuum packaged with corresponding letters listed on an easy to use Bill-of-Materials List (BOM) along with exploded diagrams and a simple order of operation procedure list to follow for installation. Made with mechanics, technicians, racers and DIY enthusiasts in mind. This is a Racing Product and intended to be installed only by a skilled and experience technician who is familiar with the B58 engine platform Features: Utilizes a High Performance, Motorsports-Grade Bar/Plate Air-to-Water Intercooler Core 25% larger than the standard Gen-2 B58 Super Manifold (CSF#8200) – 15 Rows of Water Cooling vs. CSF #8200 12 Rows and OEM 6 Rows Core can be setup for dual or single pass configuration The -16 ORB bung on front water end plate can be used to adjust the flow configuration to single-pass and/or to be used with an ice-box setup. Comes with CNC machined plug to use in dual-pass configuration Designed in SolidWorks Using Computational Fluid Dynamics (CFD) Integrated Air Divider in Inlet Tank Evenly Distributes Airflow Throughout the Core Improved slotted mounting holes on throttle body side for easier installation Easy Access to Spin-Off Oil Filter for Quick Oil Changes Integrated Sensor Pad with Two 1/4' and Three 1/8' NPT Ports to Measure Additional Parameters or Extra Sources of Vacuum Included Fuel Rail for Top Feed Port Injection Individual 1/8' NPT Ports on the Top of Each Cylinder Runner for Nitrous or Meth Injection Allows for Even Spray Distribution and Control for Maximum Performance Individual 1/8' NPT Breather Ports for Both Inlet/Outlet Water Connections on Back of Manifold for Easy Bleeding Included KIYLEX Thermal Rejection Manifold Spacer* Made from KIYLEX® – A patented revolutionary high-performance final stage polymer Acts as a thermal barrier that dissipates heat between the cylinder head and intake manifold Proven to lower intake manifold temperatures by up to 15% Lowers Intake Air Temps (IATs) Some modifications to install – this product is intended to be installed only by a skilled and experience technician who is familiar with the B58 engine platform Includes Hardware and Installation Kit with Picture Diagrams and Instructions Finish: Raw Billet – Made by World-Leading Automotive Machinist Custom Plenum Creations in Australia Optional Powder-Coating and Thermal Rejection Finishes Available – CSF #8400C / #8400B OEM Part Number: Toyota: 17101-WAA01 BMW: 11-61-8-647-977 Applications: B58TU (B58 Gen 2 – B58B30M1, B58B30C, & B58B30O1) 2020+ Toyota GR Supra 3.0L incl Base, Launch, Premium, & A91 2022+ BMW M240i & M240i xDrive (G42) 2018+ BMW M340i & M340i xDrive (G20) 2020+ BMW M440i & M440i xDrive (G22/23/26) 2018+ BMW 540i & 540i xDrive (G30/31) *B85C (2nd gen) motor only 2018+ BMW 640i & 640i xDrive (G32) 2018+ BMW X3 M40iX (G01) 2018+ BMW X4 M40iX (G02) 2018+ BMW Z4 M40i (G29) 2018+ BMW X5 45i, 45iX, 45eX (G05) 2018+ BMW X6 40i 40iX (G06) 2018+ BMW X7 40iX (G07)

Show More Show Less

CSF Racing "Race X" Intake Manifold - Raw Billet Aluminum F...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:23648670

Part#: 8400

EO#: D-770

Ships in 3 Business Days

$ 5,599.00 USD

Add to Wish List

Qty

$ 5,599.00 USD

Add to Wish List

When CSF released the Gen 2 B58 “Super Manifold” for G-Chassis BMW and Supra, it was a smash hit (CSF #8200/8200B). It quickly became the go-to manifold for racers and enthusiasts looking to get the most out of their B58. Over the past two years, people have been pushing the limits of the Gen 2 B58. While the Gen 2 B58 “Super Manifold” has held up amazingly to countless 1000hp builds, customers still wanted more. Well, the wait is over and CSF is proud to introduce the “Race X” Charge-Air-Cooler manifold. Another industry-leading design by the trio of CSF, VF Engineering, and Custom Plenum Creations. The Race X Manifold has many of the features and specs as the Super Manifold in addition to some new race-focused features. The Race X Manifold is designed for high-level motorsports competition and racing applications. The limits of the current Super Manifold are very high and more than enough for many enthusiasts, tuners, and racers. However, those looking to push their Gen 2 B58s to the maximum have been asking for more. Race X features a 25% larger core, additional parameter ports, and an optimized water flow system. The manifold can be used in either dual or single-pass configurations and features a new front port that has been optimized for ice box setups. This is the most versatile and largest manifold available on the market and has been race-tested on some of the fastest B58-powered drag cars in the world. Biggest/Best Core in the Industry Once you get into that 1000hp+ range on the B58, most aftermarket manifolds have reached their limits in terms of flow and cooling capacity. To resolve both limitations, CSF increased the size of the core by 25% over the #8200. The larger core has 15 cooling rows (vs 12 rows on the CSF #8200) and keeps up with the air flow demand while also increasing the cooling capacity. Dual or Single Pass CSF specifically designed the front water end plate of the manifold to allow for a single pass setup or ice box setup. This -16 ORB bung found on the front water plate is the largest available on any aftermarket B58 manifold (competitor’s unit uses a -12 fitting). CSF has teamed up with industry-leading fitting and hose experts Brown and Miller (BRMS) to optimize the water flow out of the front plate. CSF recommends using the following BRMS fittings with a maximum fitting angle of 120 degrees. BRMS is recommended by CSF because there are no flow restrictions on their fittings and are highly regarded as the best in the motorsport industry. Top Feed Port Injection with Included Fuel Rail The CSF Manifold includes an extruded fuel rail which attaches to the outlet side of the manifold. The AN-8 fuel rail comes with a -8 internal hex plug fitting. This allows you to run a returnless fuel system or a full loop setup. Fuel rail aperture for each cylinder is an optimized 7mm opening for compatibility with most commonly used high performance injectors CSF recommends using Injector Dynamics (ID) injectors for the best performance – the most commonly used injector for this engine has been ID model # 1050.34.14.14.6 (qty 6) Anodized CNC machined injector hats (qty 6) are included in the supplied hardware kit to accommodate short height injectors aka “shorties” Individual Nitrous / Methanol Injector Ports A 1/8' NPT port on each cylinder runner can be used for nitrous or methanol injection. The CSF manifold allows for maximum spray control and even spray distribution throughout the engine. A nitrous system set-up specifically for the CSF manifold is available from industry leaders Nitrous Express through Titan Motorsports. Expanded Vacuum and Parameter Pad CSF has included a port pad into the machining of the tank on the manifold inlet side. The ports can be used to measure additional parameters or as an additional vacuum source. The Race X Manifold has two additional 1/4' NPT ports to go along with the standard three 1/8' NPT ports. Each port can be plugged with the included hardware kit if they are not used. Easy Access to Spin-Off Oil Filter CSF incorporated a recessed design towards the back of the manifold that allows easy access to the spin-off oil filter. This means you do not have to remove your manifold every time you want to change your oil. Air Inlet Divider The inclusion of an air divider welded into the inlet side tank of the manifold is another exclusive feature of the CSF manifold. With the length of the manifold, the engineers at VF Engineering wanted to make sure that the volume and velocity of air was consistent to all cylinders. The inlet has an air divider to ensure the best possible airflow and equal cooling performance to each cylinder. Airflow to the back of the manifold (cylinders four, five, and six) should be equal to the airflow to the front of the manifold (cylinders one, two, and three) for the best possible performance. Breather Ports for Inlet/Outlet of Water Tanks Two 1/8' NPT ports are located on the top of the back water plate. These ports can be used to measure inlet/outlet water temps as well as used as breather ports to help in the bleeding procedure. 1/8th NPT plugs come included in the supplied hardware kit. Please follow OEM BMW or Toyota bleeding procedure which takes roughly 15 minutes to complete. Slotted Mounting Tabs Positioning the manifold in the engine bay is fairly straightforward. However, it can be a little frustrating to get the bolt holes on the intake side mounting tabs lined up perfectly. After doing a few test fittings CSF realized this could be resolved by slotting the mounting tabs. This allows the bolts to be installed before final positioning adjustments and makes installation a bit easier. Thermal Rejection Competition Spacer Made from KIYLEX®, a patented revolutionary high-performance final stage polymer. KIYLEX® is as strong as aluminum and can withstand temperatures up to 1100°F. This spacer is designed to insulate the intake manifold from conductive heat transfer from the cylinder head. This thermal barrier reduces manifold temperatures which helps lower Intake Air Temperatures (IATs), improve charge air cooler efficiency, and combats heat soak. CSF is the exclusive distributor for the KIYLEX® Intake Manifold Spacer for the B58 Motor. The addition of the Thermal Rejection Spacer is especially useful for Drag/Roll-Racing Events where vehicles typically sit in staging lanes in-between racing. This causes extreme heat soak to the liquid-to-air manifold as there is not sufficient airflow passing over the front mount heat exchanger when the car is idling (which is responsible for cooling the charge air fluid that runs through the manifold). This causes the starting IATs on subsequent runs to be higher than on the initial run. The CSF Manifold is made from Billet Aluminum and 100% TIG Welded for strength, which allows it to be able to withstand higher boost pressures compared to the OEM plastic manifold. Aluminum has higher thermal conductivity than plastic resulting in a higher rate of heat transfer between the cylinder head and manifold. Adding the Thermal Rejection Spacer reduces heat transfer between the two metal components (cylinder head & manifold). The spacer absorbs the heat from the cylinder head and dissipates it rather than transferring it to the manifold. Hardware Kit, Well Thought-Out Instruction Manual The supplied hardware kit includes all of the brackets, bolts, washers, and CNC machined fittings for installation. This is an industry-exclusive feature to the CSF x VF Engineering design, and was extremely difficult to not only engineer, but to manufacture as well. An array of items come vacuum packaged with corresponding letters listed on an easy to use Bill-of-Materials List (BOM) along with exploded diagrams and a simple order of operation procedure list to follow for installation. Made with mechanics, technicians, racers and DIY enthusiasts in mind. This is a Racing Product and intended to be installed only by a skilled and experience technician who is familiar with the B58 engine platform Features: Utilizes a High Performance, Motorsports-Grade Bar/Plate Air-to-Water Intercooler Core 25% larger than the standard Gen-2 B58 Super Manifold (CSF#8200) – 15 Rows of Water Cooling vs. CSF #8200 12 Rows and OEM 6 Rows Core can be setup for dual or single pass configuration The -16 ORB bung on front water end plate can be used to adjust the flow configuration to single-pass and/or to be used with an ice-box setup. Comes with CNC machined plug to use in dual-pass configuration Designed in SolidWorks Using Computational Fluid Dynamics (CFD) Integrated Air Divider in Inlet Tank Evenly Distributes Airflow Throughout the Core Improved slotted mounting holes on throttle body side for easier installation Easy Access to Spin-Off Oil Filter for Quick Oil Changes Integrated Sensor Pad with Two 1/4' and Three 1/8' NPT Ports to Measure Additional Parameters or Extra Sources of Vacuum Included Fuel Rail for Top Feed Port Injection Individual 1/8' NPT Ports on the Top of Each Cylinder Runner for Nitrous or Meth Injection Allows for Even Spray Distribution and Control for Maximum Performance Individual 1/8' NPT Breather Ports for Both Inlet/Outlet Water Connections on Back of Manifold for Easy Bleeding Included KIYLEX Thermal Rejection Manifold Spacer* Made from KIYLEX® – A patented revolutionary high-performance final stage polymer Acts as a thermal barrier that dissipates heat between the cylinder head and intake manifold Proven to lower intake manifold temperatures by up to 15% Lowers Intake Air Temps (IATs) Some modifications to install – this product is intended to be installed only by a skilled and experience technician who is familiar with the B58 engine platform Includes Hardware and Installation Kit with Picture Diagrams and Instructions Finish: Raw Billet – Made by World-Leading Automotive Machinist Custom Plenum Creations in Australia Optional Powder-Coating and Thermal Rejection Finishes Available – CSF #8400C / #8400B OEM Part Number: Toyota: 17101-WAA01 BMW: 11-61-8-647-977 Applications: B58TU (B58 Gen 2 – B58B30M1, B58B30C, & B58B30O1) 2020+ Toyota GR Supra 3.0L incl Base, Launch, Premium, & A91 2022+ BMW M240i & M240i xDrive (G42) 2018+ BMW M340i & M340i xDrive (G20) 2020+ BMW M440i & M440i xDrive (G22/23/26) 2018+ BMW 540i & 540i xDrive (G30/31) *B85C (2nd gen) motor only 2018+ BMW 640i & 640i xDrive (G32) 2018+ BMW X3 M40iX (G01) 2018+ BMW X4 M40iX (G02) 2018+ BMW Z4 M40i (G29) 2018+ BMW X5 45i, 45iX, 45eX (G05) 2018+ BMW X6 40i 40iX (G06) 2018+ BMW X7 40iX (G07)

Show More Show Less

CSF Racing "Race X" Intake Manifold - Raw Billet Aluminum F...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:25109031

Part#: 8400NEO

Ships in 3 Business Days

$ 7,399.00 USD

Add to Wish List

Qty

$ 7,399.00 USD

Add to Wish List

When CSF released the Gen 2 B58 “Super Manifold” for G-Chassis BMW and Supra, it was a smash hit (CSF #8200/8200B). It quickly became the go-to manifold for racers and enthusiasts looking to get the most out of their B58. Over the past two years, people have been pushing the limits of the Gen 2 B58. While the Gen 2 B58 “Super Manifold” has held up amazingly to countless 1000hp builds, customers still wanted more. Well, the wait is over and CSF is proud to introduce the “Race X” Charge-Air-Cooler manifold. Another industry-leading design by the trio of CSF, VF Engineering, and Custom Plenum Creations. The Race X Manifold has many of the features and specs as the Super Manifold in addition to some new race-focused features. The Race X Manifold is designed for high-level motorsports competition and racing applications. The limits of the current Super Manifold are very high and more than enough for many enthusiasts, tuners, and racers. However, those looking to push their Gen 2 B58s to the maximum have been asking for more. Race X features a 25% larger core, additional parameter ports, and an optimized water flow system. The manifold can be used in either dual or single-pass configurations and features a new front port that has been optimized for ice box setups. This is the most versatile and largest manifold available on the market and has been race-tested on some of the fastest B58-powered drag cars in the world. Biggest/Best Core in the Industry Once you get into that 1000hp+ range on the B58, most aftermarket manifolds have reached their limits in terms of flow and cooling capacity. To resolve both limitations, CSF increased the size of the core by 25% over the #8200. The larger core has 15 cooling rows (vs 12 rows on the CSF #8200) and keeps up with the air flow demand while also increasing the cooling capacity. Dual or Single Pass CSF specifically designed the front water end plate of the manifold to allow for a single pass setup or ice box setup. This -16 ORB bung found on the front water plate is the largest available on any aftermarket B58 manifold (competitor’s unit uses a -12 fitting). CSF has teamed up with industry-leading fitting and hose experts Brown and Miller (BRMS) to optimize the water flow out of the front plate. CSF recommends using the following BRMS fittings with a maximum fitting angle of 120 degrees. BRMS is recommended by CSF because there are no flow restrictions on their fittings and are highly regarded as the best in the motorsport industry. Top Feed Port Injection with Included Fuel Rail The CSF Manifold includes an extruded fuel rail which attaches to the outlet side of the manifold. The AN-8 fuel rail comes with a -8 internal hex plug fitting. This allows you to run a returnless fuel system or a full loop setup. Fuel rail aperture for each cylinder is an optimized 7mm opening for compatibility with most commonly used high performance injectors CSF recommends using Injector Dynamics (ID) injectors for the best performance – the most commonly used injector for this engine has been ID model # 1050.34.14.14.6 (qty 6) Anodized CNC machined injector hats (qty 6) are included in the supplied hardware kit to accommodate short height injectors aka “shorties” Individual Nitrous / Methanol Injector Ports A 1/8' NPT port on each cylinder runner can be used for nitrous or methanol injection. The CSF manifold allows for maximum spray control and even spray distribution throughout the engine. A nitrous system set-up specifically for the CSF manifold is available from industry leaders Nitrous Express through Titan Motorsports. Expanded Vacuum and Parameter Pad CSF has included a port pad into the machining of the tank on the manifold inlet side. The ports can be used to measure additional parameters or as an additional vacuum source. The Race X Manifold has two additional 1/4' NPT ports to go along with the standard three 1/8' NPT ports. Each port can be plugged with the included hardware kit if they are not used. Easy Access to Spin-Off Oil Filter CSF incorporated a recessed design towards the back of the manifold that allows easy access to the spin-off oil filter. This means you do not have to remove your manifold every time you want to change your oil. Air Inlet Divider The inclusion of an air divider welded into the inlet side tank of the manifold is another exclusive feature of the CSF manifold. With the length of the manifold, the engineers at VF Engineering wanted to make sure that the volume and velocity of air was consistent to all cylinders. The inlet has an air divider to ensure the best possible airflow and equal cooling performance to each cylinder. Airflow to the back of the manifold (cylinders four, five, and six) should be equal to the airflow to the front of the manifold (cylinders one, two, and three) for the best possible performance. Breather Ports for Inlet/Outlet of Water Tanks Two 1/8' NPT ports are located on the top of the back water plate. These ports can be used to measure inlet/outlet water temps as well as used as breather ports to help in the bleeding procedure. 1/8th NPT plugs come included in the supplied hardware kit. Please follow OEM BMW or Toyota bleeding procedure which takes roughly 15 minutes to complete. Slotted Mounting Tabs Positioning the manifold in the engine bay is fairly straightforward. However, it can be a little frustrating to get the bolt holes on the intake side mounting tabs lined up perfectly. After doing a few test fittings CSF realized this could be resolved by slotting the mounting tabs. This allows the bolts to be installed before final positioning adjustments and makes installation a bit easier. Thermal Rejection Competition Spacer Made from KIYLEX®, a patented revolutionary high-performance final stage polymer. KIYLEX® is as strong as aluminum and can withstand temperatures up to 1100°F. This spacer is designed to insulate the intake manifold from conductive heat transfer from the cylinder head. This thermal barrier reduces manifold temperatures which helps lower Intake Air Temperatures (IATs), improve charge air cooler efficiency, and combats heat soak. CSF is the exclusive distributor for the KIYLEX® Intake Manifold Spacer for the B58 Motor. The addition of the Thermal Rejection Spacer is especially useful for Drag/Roll-Racing Events where vehicles typically sit in staging lanes in-between racing. This causes extreme heat soak to the liquid-to-air manifold as there is not sufficient airflow passing over the front mount heat exchanger when the car is idling (which is responsible for cooling the charge air fluid that runs through the manifold). This causes the starting IATs on subsequent runs to be higher than on the initial run. The CSF Manifold is made from Billet Aluminum and 100% TIG Welded for strength, which allows it to be able to withstand higher boost pressures compared to the OEM plastic manifold. Aluminum has higher thermal conductivity than plastic resulting in a higher rate of heat transfer between the cylinder head and manifold. Adding the Thermal Rejection Spacer reduces heat transfer between the two metal components (cylinder head & manifold). The spacer absorbs the heat from the cylinder head and dissipates it rather than transferring it to the manifold. Hardware Kit, Well Thought-Out Instruction Manual The supplied hardware kit includes all of the brackets, bolts, washers, and CNC machined fittings for installation. This is an industry-exclusive feature to the CSF x VF Engineering design, and was extremely difficult to not only engineer, but to manufacture as well. An array of items come vacuum packaged with corresponding letters listed on an easy to use Bill-of-Materials List (BOM) along with exploded diagrams and a simple order of operation procedure list to follow for installation. Made with mechanics, technicians, racers and DIY enthusiasts in mind. This is a Racing Product and intended to be installed only by a skilled and experience technician who is familiar with the B58 engine platform Features: Utilizes a High Performance, Motorsports-Grade Bar/Plate Air-to-Water Intercooler Core 25% larger than the standard Gen-2 B58 Super Manifold (CSF#8200) – 15 Rows of Water Cooling vs. CSF #8200 12 Rows and OEM 6 Rows Core can be setup for dual or single pass configuration The -16 ORB bung on front water end plate can be used to adjust the flow configuration to single-pass and/or to be used with an ice-box setup. Comes with CNC machined plug to use in dual-pass configuration Designed in SolidWorks Using Computational Fluid Dynamics (CFD) Integrated Air Divider in Inlet Tank Evenly Distributes Airflow Throughout the Core Improved slotted mounting holes on throttle body side for easier installation Easy Access to Spin-Off Oil Filter for Quick Oil Changes Integrated Sensor Pad with Two 1/4' and Three 1/8' NPT Ports to Measure Additional Parameters or Extra Sources of Vacuum Included Fuel Rail for Top Feed Port Injection Individual 1/8' NPT Ports on the Top of Each Cylinder Runner for Nitrous or Meth Injection Allows for Even Spray Distribution and Control for Maximum Performance Individual 1/8' NPT Breather Ports for Both Inlet/Outlet Water Connections on Back of Manifold for Easy Bleeding Included KIYLEX Thermal Rejection Manifold Spacer* Made from KIYLEX® – A patented revolutionary high-performance final stage polymer Acts as a thermal barrier that dissipates heat between the cylinder head and intake manifold Proven to lower intake manifold temperatures by up to 15% Lowers Intake Air Temps (IATs) Some modifications to install – this product is intended to be installed only by a skilled and experience technician who is familiar with the B58 engine platform Includes Hardware and Installation Kit with Picture Diagrams and Instructions Finish: Raw Billet – Made by World-Leading Automotive Machinist Custom Plenum Creations in Australia Optional Powder-Coating and Thermal Rejection Finishes Available – CSF #8400C / #8400B OEM Part Number: Toyota: 17101-WAA01 BMW: 11-61-8-647-977 Applications: B58TU (B58 Gen 2 – B58B30M1, B58B30C, & B58B30O1) 2020+ Toyota GR Supra 3.0L incl Base, Launch, Premium, & A91 2022+ BMW M240i & M240i xDrive (G42) 2018+ BMW M340i & M340i xDrive (G20) 2020+ BMW M440i & M440i xDrive (G22/23/26) 2018+ BMW 540i & 540i xDrive (G30/31) *B85C (2nd gen) motor only 2018+ BMW 640i & 640i xDrive (G32) 2018+ BMW X3 M40iX (G01) 2018+ BMW X4 M40iX (G02) 2018+ BMW Z4 M40i (G29) 2018+ BMW X5 45i, 45iX, 45eX (G05) 2018+ BMW X6 40i 40iX (G06) 2018+ BMW X7 40iX (G07)

Show More Show Less

Performance Charge-Air Cooler "Super Manifold" - Thermal Bl...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:9868813

Part#: 8200B

Ships in 3 Business Days

$ 4,599.00 USD

Add to Wish List

Qty

$ 4,599.00 USD

Add to Wish List

Designed in-joint by CSF, VF Engineering, and CPC (Custom Plenum Creations) for optimal performance, reliability, and cooling, this feature-rich intake manifold is the Tuner's dream manifold! The newer 2nd gen B58 engine, found in the Mk5 Supra, has already been proven to be an incredible platform for performance enthusiasts – taking the performance and motorsports industry by storm in just a couple of years since its release. In a short amount of time, performance enthusiasts have already started to more than double the stock engine output – now pushing through 700whp, 800whp, and looking into the elusive 4 digit 1,000whp mark. The OEM water-cooled charge air cooler intake manifold for the B58 engine is adequate in cars with little or no modifications, but starts to really show an apparent weakness in cars that have bolt-on modifications, turbo upgrades, increased fueling (such as port injection), and performance tuning. Also, the OEM intercooler system has been known to suffer from heat soak in demanding racing conditions such as time attack, endurance racing, drag racing, and drifting, as well as spirited driving on the street. This can cause the car to pull timing out of the engine due to high intake air temperatures (IATs), and then can cause “limp mode” once temperatures reach a certain threshold, as the vehicle’s ECU will cut power to protect the engine. CSF conducted extensive testing on the dyno with R&D partner VF Engineering to ensure performance improvements before going into production with the new manifold. CSF performed over 50 dyno runs on the same car, on the same day, in relatively hot ambient conditions (~90°F) comparing the performance of the CSF Charge-Air Cooler Manifold to the OEM. Both the CSF and OEM cooler went through roughly 25 back-to-back dyno pulls every 30 seconds to measure the performance of the car overtime, resistance to heat soak, recovery time, and the effect on the turbo system duty cycle. CSF's Testing Results: Faster recovery of intake air temperatures ~30°F reduction of intake air temperatures (IAT’s) compared to OEM Less pressure drop compared to OEM core Puts less stress on the turbo system, allowing more boost to be made at higher targets Avoided going into limp mode after prolonged demanding conditions, simulating motorsports use On a stage 2 car with bolt-on upgrades, making ~400whp, comparing dyno run 19 between CSF and OEM, an increase of ~26whp and 11wtq were achieved The performance increase and delta between CSF and OEM will be bigger as power is increased in the vehicle Features & Specifications: High Performance, Motorsports-Grade Bar/Plate Air-to-Water Intercooler Core - Double the Capacity of the OEM Core (12 Rows of Water Cooling vs. OEM 6 Rows) lower pressure drop across the system Easy Access to Oil Filter Housing Integrated Sensor Pad - Three 1/8" NPT Ports Included Optional Fuel Rail - Adds Port Injection Capabilities! Individual Port Injection Bungs on Each Cylinder Runner - Arrives Pre-Plugged Integrated Nitrous/Meth Ports - 1/8" NPT ports on each cylinder runner Allows for Even Spray Distribution and Control for Maximum Performance and Engine Protection Individual 1/8" NPT Breather Ports for Both Inlet/Outlet Water Connections on Back of Manifold for Easy Air-Bleeding of the System Plug-and-Play design, Requiring No Modifications to Install Includes Hardware and Installation Kit with Picture Diagrams Containing 28 Different Parts for Easy Installation Can be Used With OEM or Aftermarket Engine Covers (with OEM Connections) Comes Finished in Thermal Black Heat Dispersion Coating Made by World-Leading Automotive Machinist Custom Plenum Creations in Australia Looking to get the most out of this intake? We suggest pairing this with CSF's B58 Thermal Rejection Competition Spacer! (See T#8154081)

Show More Show Less

CSF - Charge-Air Cooler Manifold - BMW Gen 2 B58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:33880027

Part#: 8400C

Ships in 3 Business Days

$ 5,995.00 USD

Add to Wish List

Qty

$ 5,995.00 USD

Add to Wish List

The CSF - Charge-Air Cooler Manifold - BMW Gen 2 B58 is a premium performance upgrade engineered for BMW enthusiasts who want to maximize their vehicle's power and efficiency. This advanced cooler manifold is designed to optimize airflow, reducing intake temperatures and preventing heat soak, which results in improved turbocharger performance and engine reliability. Ideal for high-performance applications, this manifold ensures consistent power delivery even under extreme conditions. Available through Turner Motorsport, this product guarantees a perfect fit for BMW Gen 2 B58 engines, offering both durability and unmatched performance.

Key Benefits:

Superior Cooling Efficiency: Lowers intake air temperatures for enhanced engine performance and efficiency.
Maximized Turbo Performance: Helps the turbocharger work more efficiently by reducing heat soak and maintaining lower temperatures.
Engine Durability: Ensures long-term engine reliability by preventing overheating and improving cooling capacity.
Perfect Fit for BMW Gen 2 B58: Specifically designed for BMW Gen 2 B58 engines, providing easy installation and seamless integration.
Offered by Turner Motorsport: Available through Turner Motorsport, guaranteeing authenticity and high-quality performance.

The CSF - Charge-Air Cooler Manifold - BMW Gen 2 B58 is the ultimate solution for BMW owners who demand more power, better reliability, and improved turbo efficiency.

Show More Show Less

CSF - Charge-Air Cooler Manifold BMW Gen 2 B58 “Super Manifold"...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:33880010

Part#: 8200C

Ships in 3 Business Days

$ 4,599.00 USD

Add to Wish List

Qty

$ 4,599.00 USD

Add to Wish List

The CSF - Charge-Air Cooler Manifold BMW Gen 2 B58 “Race X” is an elite performance upgrade designed to push your BMW’s power and cooling efficiency to the next level. This high-performance manifold is specifically engineered for BMW’s B58 engines, offering exceptional cooling properties and maximizing airflow for the most demanding driving conditions. Manufactured with advanced materials and precision craftsmanship, the Race X manifold ensures optimal intake temperatures, resulting in improved horsepower, torque, and overall engine reliability.

Ideal for racing enthusiasts and those who demand peak performance, the CSF Charge-Air Cooler Manifold for BMW Gen 2 B58 engines is a direct fit and easy to install. Turner Motorsport proudly offers this high-quality upgrade to boost your vehicle’s potential.

Key Features:

Advanced cooling technology designed for BMW Gen 2 B58 engines
Enhanced airflow and intake temperature control
Direct-fit installation for ease of use
Precision-engineered for maximum durability and performance
Available at Turner Motorsport for the ultimate BMW upgrade

Whether you're on the track or looking to elevate your BMW’s daily performance, the CSF Race X Charge-Air Cooler Manifold offers the perfect balance of cooling and power enhancement. Turner Motorsport provides this top-tier upgrade to ensure your B58 engine operates at its best.

Show More Show Less

Performance Charge-Air Cooler "Super Manifold" - DLC Neo Ch...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! This is a special order finish. Lead time is 5-6 weeks.

T#:25042501

Part#: 8200NEO

Ships in 3 Business Days

$ 6,099.00 USD

Add to Wish List

Qty

$ 6,099.00 USD

Add to Wish List

Designed in-joint by CSF, VF Engineering, and CPC (Custom Plenum Creations) for optimal performance, reliability, and cooling, this feature-rich intake manifold is the Tuner's dream manifold! The newer 2nd gen B58 engine, found in the Mk5 Supra, has already been proven to be an incredible platform for performance enthusiasts – taking the performance and motorsports industry by storm in just a couple of years since its release. In a short amount of time, performance enthusiasts have already started to more than double the stock engine output – now pushing through 700whp, 800whp, and looking into the elusive 4 digit 1,000whp mark. The OEM water-cooled charge air cooler intake manifold for the B58 engine is adequate in cars with little or no modifications, but starts to really show an apparent weakness in cars that have bolt-on modifications, turbo upgrades, increased fueling (such as port injection), and performance tuning. Also, the OEM intercooler system has been known to suffer from heat soak in demanding racing conditions such as time attack, endurance racing, drag racing, and drifting, as well as spirited driving on the street. This can cause the car to pull timing out of the engine due to high intake air temperatures (IATs), and then can cause “limp mode” once temperatures reach a certain threshold, as the vehicle’s ECU will cut power to protect the engine. CSF conducted extensive testing on the dyno with R&D partner VF Engineering to ensure performance improvements before going into production with the new manifold. CSF performed over 50 dyno runs on the same car, on the same day, in relatively hot ambient conditions (~90°F) comparing the performance of the CSF Charge-Air Cooler Manifold to the OEM. Both the CSF and OEM cooler went through roughly 25 back-to-back dyno pulls every 30 seconds to measure the performance of the car overtime, resistance to heat soak, recovery time, and the effect on the turbo system duty cycle.

Show More Show Less

Project Cars

SELECT YOUR BMW

CSF for BMW X Series G07 X7 (2019+)

Sub-Categories

CSF Racing Performance "Super Manifold" - BMW G20/22 G30 G0...

CSF B58 Thermal Rejection Competition Spacer - BMW G20/22 G30 G01/02,...

CSF Universal Large Single-Pass Oil Cooler - Universal Application ...

CSF Racing "Race X" Intake Manifold - Thermal Black Finish ...

CSF Racing "Race X" Intake Manifold - Raw Billet Aluminum F...

CSF Racing "Race X" Intake Manifold - Raw Billet Aluminum F...

Performance Charge-Air Cooler "Super Manifold" - Thermal Bl...

CSF - Charge-Air Cooler Manifold - BMW Gen 2 B58

Key Benefits:

CSF - Charge-Air Cooler Manifold BMW Gen 2 B58 “Super Manifold"...

Key Features:

Performance Charge-Air Cooler "Super Manifold" - DLC Neo Ch...

Select Vehicle

Category

Brand

Price

Special Offers

Narrow Results