BMW 7 Series G11 (2016+)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

Burger Motorsports - Corporate Logo
T#:27171925
Part#: UNI-BMS-PIPLUGS
In Stock
$ 60.00 USD
Free Shipping on orders $49 and up
These dummy injectors fit in place of port injection fuel injectors to block the holes. Allows use to aluminum manifolds with port injection bungs without having to purchase fuel injectors. Plugs are EV14 injectors and measure 38mm or 1.5" from o-ring to o-ring.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:586269
Part#: BMSPBT
In Stock
$ 199.00 USD
Free Shipping
$ 199.00 USD
Free Shipping
The BMS Pedal Tuner is a BMW Performance Chip with a pre-programmed internal chip that intercepts the stock signals from your BMW's electronic control unit (ECU) and changes them to achieve better performance by adjusting the air-fuel ratio and spark timing. Made specifically for the BMW inline six-cylinder motors. The PBX also has an adjustable throttle feature that can be combined with the Performance chip feature by selecting a setting or "map". The BMS Pedal Tuner contains both a performance chip which gives you an extra 8-10 Horsepower at the wheels and an adjustable throttle boost feature that makes the gas pedal send a boosted throttle signal in increments of 30%, 60%, and 100% over the stock BMW signal. Depending on what setting/ "map" you select you can create a perfect blend of throttle response. The BMS Pedal Tuner will make your vehicle more responsive, spirited and fun to drive. It will make your vehicle faster by increasing the horsepower and torque. It works well with other modifications like intakes and exhausts, but can also be used alone. It will remove the "dead space" when you push on the non-responsive stock BMW accelerator. It changes the way the car drives and feels. You can turn it on and off from the comfort of your driver's seat to feel the difference. The BMS Pedal Tuner is a clear choice. Features: Throttle Re-mapping for Better Response / Reaction Removes "dead area" delay in gas pedal 7 Different Maps / Settings for more enjoyable driving Can be set and turned on and off from inside the car Invisible to dealers equipment Made in USA
Show More Show Less
Metal Oil Filter Housing Upgrade With Filter & Cooler - BMW Gen1 B58 ...
For earlier vehicles with the Gen1 B58 (B58A) - not compatible with the B58TU (B58D) en...
Burger Motorsports - Corporate Logo
T#:43378539
Part#: B58G1OFH
In Stock
$ 279.00 USD
Free Shipping on orders $49 and up
$ 279.00 USD
Free Shipping on orders $49 and up
Upgraded metal oil filter housing designed to replace the faulty stock housing which is known to crack.

Burger Motorsports - Corporate Logo
T#:26404907
Part#: 12MMSPG
In Stock
$ 35.00 USD
Free Shipping on orders $49 and up

Spark Plug Gapper Tool BMS Billet is essential for accurately adjusting the gap of spark plugs. This precision tool ensures that each plug is set to the exact specifications required for optimal engine performance. Made in the USA, it features a 12mm plug thread size, making it suitable for a wide range of applications.

  • Precision Adjustment: Allows for accurate gap adjustments to ensure optimal spark performance and engine efficiency.
  • Speed and Efficiency: Streamlines the process of gapping plugs while maintaining high precision, saving time and effort.
  • High-Quality Construction: Crafted from billet materials for durability and reliability, ensuring long-term use.
  • Lifetime Replacement Program: Comes with a lifetime replacement guarantee, reflecting confidence in the tool's quality and performance.

Upgrade your spark plug maintenance with the Spark Plug Gapper Tool BMS Billet for a reliable and precise solution.

Show More Show Less

Burger Motorsports - Corporate Logo
T#:38621407
Part#: BMS-TCBS
Back Ordered
$ 25.00 USD
Free Shipping on orders $49 and up
Replace your fragile OEM plastic coolant bleeder screw, which is prone to cracking and failure, with a premium titanium upgrade built for strength and style under the hood. Factory plastic components weaken over time due to constant heat cycles, leading to brittleness and potential failure. Our titanium replacement delivers superior durability, being twice as strong as aluminum yet 45% lighter than steel, ensuring unmatched resilience and long-term reliability for your coolant system. More than an upgrade, it’s a must-have for engine longevity. CNC-machined from solid titanium, each screw features a laser-etched Burger Motorsports logo and is hand-burned to create unique color patterns—no two are alike. A heavy-duty replacement O-ring is included for a perfect fit.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:598298
Part#: JB4-SPWCK-F
In Stock
$ 159.00 USD
Free Shipping
$ 159.00 USD
Free Shipping
The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it in to the JB4 where your BMS DATA cable connects, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS®, or Android and sold separately via the Apple® or Android® app store on your phone. The wireless adapter is not compatible with the JB4 windows interface. See our other listings for the "BMS DATA cable" for laptop use.
Show More Show Less
Groit's Ceramic Headlight Restoration Kit
2X Entries For Our G87 M2 Sweepstakes!
Griot's - Corporate Logo
T#:2119650
Part#: 11422
In Stock
$ 29.99 USD
Free Shipping on orders $49 and up

Griot's Ceramic Headlight Restoration Kit offers an effective solution for restoring severely oxidized and yellowed headlights to pristine clarity. Designed by Griot's Garage, this comprehensive kit is engineered to address foggy, ineffective headlights without the need for power tools. It includes proprietary oxidation removing wipes, a comfortable foam contour grip, and high-quality abrasives to eliminate failed factory coatings. The restoration process is finished with a lifetime ceramic coating from Cerakote Ceramics, ensuring long-lasting protection. The kit contains everything needed: 2 Ceramic Headlight Coating Wipes, a Contour Grip Applicator, foam-backed sanding discs (2x 1000 grit, 1x 2000 grit, 1x 3000 grit), 2 Oxidation Remover Wipes, and 2 protective nitrile gloves.

  • Restores Clarity: Removes severe oxidation and yellowing for crystal-clear headlights.
  • Easy Application: No power tools required; includes ergonomic foam contour grip.
  • High-Quality Abrasives: Foam-backed sanding discs in multiple grits for effective restoration.
  • Lifetime Protection: Ceramic coating from Cerakote Ceramics for long-lasting clarity.
  • Complete Kit: Includes all necessary components for a successful headlight restoration.

CA residents - WARNING: This product can expose you to chemicals including Methanol which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Show More Show Less

JB4 Bluetooth Wireless Connect Kit - Separate Power Wire - E-Chassis ...
For use with older E chassis BMW JB4 systems with the square plastic case.
Burger Motorsports - Corporate Logo
T#:403194
Part#: JB4-BT
In Stock
$ 149.00

This product was last offered at the strikethrough price on
05-13-2026

$ 99.00 USD
Free Shipping
$ 99.00 USD
Free Shipping
The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real-time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it into the JB4 where your BMS DATA cable connects, attach the power and ground wire to the JB4 harness using the included connectors, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS, or Android® and sold separately via the Apple® or Android® app store on your phone. This adapter is not compatible with the JB4 windows interface.
Show More Show Less

Metal Oil Filter Housing Upgrade With Filter & Cooler - BMW B58TU (B5...
For later vehicles with the Gen2 B58 (B58TU/B58C/B58D) engine and without the Motorspor...
Burger Motorsports - Corporate Logo
T#:43378540
Part#: B58G2OFH
Back Ordered
$ 279.00 USD
Free Shipping on orders $49 and up
$ 279.00 USD
Free Shipping on orders $49 and up
Upgraded metal oil filter housing designed to replace the faulty stock housing which is known to crack.
Microfiber Edgeless Utility Towels - Set Of 50
2X Entries For Our G87 M2 Sweepstakes!
Griot's - Corporate Logo
T#:2119659
Part#: 14331
In Stock
$ 39.99 USD
Free Shipping on orders $49 and up
These absorbent edgeless microfiber towels will tackle even the dirtiest clean-up jobs and are a great value at under 80 cents per
Burger Motorsports - Corporate Logo
T#:20815185
Part#: BMSWMITC
Ships in 6 Business Days
$ 59.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports custom billet Water/Methanol Injection (WMI) cap includes an integrated heavy-duty check valve to let much-needed air in and prevent dangerous WMI vapor/fumes and liquid from getting out! Each cap is CNC machined in the USA from a solid block of billet aluminum, engraved with the BMS logo, and anodized blue for protection. Check valve piston must be lightly lubricated if tank shows signs of vacuum. One drop of penetrating oil or motor oil in the top will keep the check valve operational. Features and Benefits Integrated heavy-duty check valve lets air in but not out Specifically designed to prevent evaporation Keeps vapors inside the tank Made from a solid block of billet aluminum Blue anodizing for corrosion protection Exaggerated grips for easy removal Integrated heavy-duty o-ring Made in the USA
Show More Show Less


Burger Motorsports - Corporate Logo
T#:558165
Part#: 1G-MT-CL
In Stock
$ 30.00 USD
Free Shipping on orders $49 and up
The least expensive option available from BMS, this 1 gallon tank is compact and flexible allowing for a wide range of mounting on any flat vertical surface in the trunk. The tank is clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 11" x W 4.5 x H 9"
Show More Show Less
Paint Cleaning Clay - 8oz
2X Entries For Our G87 M2 Sweepstakes!
Griot's - Corporate Logo
T#:11865
Part#: 11153
In Stock
$ 21.99 USD
Free Shipping on orders $49 and up
Lifts embedded contaminants, leaving behind an ultra-smooth surface that makes your paint shine brighter
Ceramic 3 in 1 Wax 22oz
2X Entries For Our G87 M2 Sweepstakes!
Griot's - Corporate Logo
T#:641313
Part#: 10978
In Stock
$ 21.99 USD
Free Shipping on orders $49 and up
Griot's customers asked for a Griot's Garage ceramic... here it is. We've stepped up to create, formulate, and manufacture our own

Griot's Garage Speed Shine 1 gallon
2X Entries For Our G87 M2 Sweepstakes!
Griot's - Corporate Logo
T#:11862
Part#: 11148
Ships in 8 Business Days
$ 34.99 USD
Free Shipping on orders $49 and up
Speed Shine maintains your car's lustrous finish between washings

Burger Motorsports - Corporate Logo
T#:40004848
Part#: JB4-B48
In Stock
$ 599.00 USD
Free Shipping on orders $49 and up
The JB4 is the most advanced and highly featured tuning system available for your B38, B46, and B48 powered BMW. Power gains are up to 40hp to the wheels (55hp crank) for a B48, gains with bolt-on parts, higher octane, E85 mixtures, and larger turbos are even higher. The JB4 features a simple plug & play installation harness for easy installation & removal and includes many features not found with any other tune. Including on the fly in-dash map switching between factory and various performance maps, optional in-dash gauge displays for boost, boost limiting by gear for improved traction in lower gears, progressive water/methanol support, built-in data logging, built-in code reading, optional direct EWG control to prevent throttle closure with exhaust modifications, exhaust flapper control, and much more. Other more expensive tuners may claim to equal the JB4's technology but upon closer examination lack most if not all of the JB4's features. Remember the JB4 does not require any additional modifications or previous stages. Simply install the JB4 as your first and only modification and enjoy an entirely new fast and smooth racing experience. The JB4 also does not require any user setup or customization, but for those who are interested in logging, adding new features as we post them, etc, we suggest the BMS DATA cable or JB4 mobile phone adapter. The JB4 automatically detects between the B38, B46, B48 models at boot up making installation and setup a snap. Wirelessly connect the JB4 to your Bluetooth 4.0 compatible iOS and Android device via the JB4 Mobile connect kit or to your Windows laptop with the BMS data cable. Both options allow you to record and analyze vehicle and tuning data, change JB4 performance maps, and update JB4 firmware as we release free newer versions with updates, more powerful maps, and new features under development. A separate JB4 Mobile app purchase is also required. JB4 Map Guide: Map0: Stock tuning, fully disable JB4 Map1: 3psi over stock added (91 octane) Map2: 4psi over stock added (91-93 octane) Map3: 6psi over stock added (93+ octane) Map4: Absolute target map with peak target of 20psi (93+ and/or 30% E85, EWG connector suggested) Map5: Absolute target map with peak target of 22psi (30% E85+ fuel, EWG connector suggested) Map6: Custom tuning map -- see details on JB4tech.com B58 JB4 page Map7: Progressive WMI map with tuning a function of meth flow and user-defined boost additive. Map8: VALET / Low Boost Map JB4 Power Gains, Features, & Benefits Power gains of up to 100hp to the wheels on a stock vehicle Improves 0-60 times and 1/4 mile times Preloaded with custom JB4 BMW tuning software and up to 8 maps for various fuel and modification levels Ethanol (E85) compatible tuning maps Able to read/delete fault codes View and record up to 40 different gauges/engine parameters in real time with the JB4 app. Boost by gear in 1st, 2nd, and 3rd can be controlled via the JB4 app for a perfect launch Exhaust flap operation can be controlled in most JB4 applications Compatible with JB4 Mobile for smartphone logging, tuning changes, and adjustment The JB4 offers a lot more performance, functionality, and safety than your average performance chip Quick Plug & Play Installation CANbus OBDII integration offering unrivaled tuning features and performance Improved performance over non-integrated chip tunes Runs as smoothly as stock, this is how your vehicle should have come from the factory Compatible with all driving modes Fuel economy unchanged during normal driving 91 octane fuel or better required for performance gains Not VIN locked and can be removed without a trace and resold down the road Includes the rugged JB4 billet aluminum enclosure for protection Designed and assembled in the USA Free USA Shipping 5-year warranty Note for 2018+ G chassis vehicles with the digital dash layout we have not yet added in the JB4 commands to allow in-dash control but will provide those via a free firmware update once developed. Until then a JB4 mobile adapter or BMS data cable is required for any map and setting changes.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:21012607
Part#: JBPLUS-B58-3W
In Stock
$ 239.00 USD
Free Shipping on orders $49 and up
The popular and well-proven JB Plus quick install tuner is available for B46, B48, and B58 applications! Boost is user adjustable up to 4.5psi over stock providing gains up to 30 wheel horsepower and 40 wheel torque on the B48 motor and up to 40 wheel horsepower and 50 wheel torque on the B58 motor. Timing and fueling remains managed seamlessly by the DME, preserving all factory safety systems. While the JB4 is the ultimate tuning tool the JB Plus (JB+) is a quick and simple way to add a few HP with minimal cost and minimal install effort. Something that anyone can buy, install in under a minute, and really feel from the driver's seat. The fuel economy during normal driving is unchanged. Automatically detects the engine type upon installation allowing the same unit to be used for any B48 B58 F series application!
Show More Show Less

Burger Motorsports - Corporate Logo
T#:9803960
Part#: BMWJACKPADRED4
Ships in 2 Business Days
$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping

Ensure safe and professional jacking of your BMW, 2020 Supra, or MINI with the Turner Motorsport Jack Pad Adapter. Designed to mimic the factory scissor jack, this adapter allows for secure lifting at any of the 4 factory jack points without causing damage to your vehicle. Made in the USA from solid billet aluminum, it features the Burger Motorsports logo and a honeycomb grip pattern for stability. Simple to use and compatible with most floor jacks, it ensures correct and secure lifting every time. Here are the key benefits:

  • Safely lifts your BMW, 2020 Supra, or MINI at factory jack points
  • Prevents damage to rocker panels or vehicle undercarriage
  • Made from solid billet aluminum for durability
  • Engraved Burger Motorsports logo for authenticity
  • Honeycomb grip pattern for stability during use
Show More Show Less
Burger Motorsports - Corporate Logo
T#:21045500
Part#: BMS-BOFC
In Stock
Starting at $ 79.00 USD
Free Shipping on orders $49 and up
Starting at $ 79.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports billet aluminum B58 oil filter cover directly replaces your weak OE plastic cap for greater protection, ease of removal/install, and great looks under the hood. You can use a 3/8" inch drive ratchet or torque wrench to install and remove. The built-in 32mm hex head does not require a special removal/install tool like the factory cap. Uses the OE oil filter, filter housing o-ring, and filter insert. Anodized for protection. This quality part is a must for any serious BMW owner. Install: After removing the OEM oil filter cap, remove the filter and be sure to remove the plastic oil filter bypass valve and transfer it to the new BMS billet oil filter cap. Be sure to replace the exterior o-ring gasket also when installing. Features and Benefits Solid aluminum design is much stronger than brittle plastic Integrated heat sinks for better oil cooling Special tools are not required for removal/install like the factory cap Strong design won't fail under pressure Reuses OE filter insert and o-ring Anodized for protection Looks great under the hood Available in black, red, silver, and blue Made in the USA
Show More Show Less

Burger Motorsport JB4 Performance Tuner - BMW F22/23 F3X G01/G02 Gen1...
For models with the earlier Gen1 B58 engine only
Not for sale or use in the state of California.
Burger Motorsports - Corporate Logo
T#:587915
Part#: JB4-B58
In Stock
$ 599.00 USD
Free Shipping
$ 599.00 USD
Free Shipping
The JB4 is the most advanced and highly featured tuning system available for your B58 and B48 vehicle. Power gains are up to 60hp to the wheels (80hp crank) on a completely stock car on pump gas for a B58 and up to 40hp to the wheels (55hp crank) for a B48, gains with bolt on parts, higher octane, and larger turbos are even higher. The JB4 features a simple plug and play installation harness for easy installation & removal and includes many features not found with any other tune. Including on the fly in dash map switching between factory and various performance maps, optional in dash gauge displays for boost, boost limiting by gear for improved traction in lower gears, progressive water/methanol support, built in data logging, built in code reading, optional direct EWG control to prevent throttle closure with exhaust modifications, exhaust flapper control, and much more. Other more expensive tuners may claim to equal the JB4's technology but upon closer examination lack most if not all of the JB4's features. Remember the JB4 does not require any additional modifications or previous stages. Simply install the JB4 as your first and only modification and enjoy an entirely new fast and smooth racing experience. The JB4 also does not require any user setup or customization but for those who are interested in logging, adding new features as we post them, etc, we suggest the BMS DATA cable or REV3 mobile phone adapter. The JB4 automatically detects between the B46, B48, and B58 models at boot up making installation and setup a snap.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:51848519
Part#: G12B48CP
Ships on Aug 6, 2026
New Item
$ 299.00 USD
Free Shipping on orders $49 and up
$ 299.00 USD
Free Shipping on orders $49 and up
The BMS Gen 1 B48 charge pipe upgrade is constructed from high-gauge aluminum and features a CNC throttle body and turbo flange for a snug, OEM-style fit. It is completed with a black textured finish to coordinate with the engine bay and boasts two 1/8" NPT bungs ideal for an external boost gauge or methanol nozzles. Also includes a heavy-duty replacement coupler, o-rings, clamps, and all required installation hardware.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:21209828
Part#: B58G2CP
Back Ordered
Starting at $ 299.00 USD
Free Shipping on orders $49 and up
Starting at $ 299.00 USD
Free Shipping on orders $49 and up
Replace the failure prone plastic charge pipe that came on your car before it leaves you stranded! The BMS Elite B58TU charge pipe upgrade is constructed from high-gauge aluminum and features a CNC throttle body and turbo flange for a snug, OEM-style fit. It features a glossy black powder coat to coordinate with the engine bay and includes three 1/8" NPT bungs ideal for an external boost gauge or methanol nozzles. With a double o-ring seal design on the chargepipe flange that attaches to the turbo, this chargepipe is designed to withstand up to 40+psi of high boost. Also includes a heavy-duty replacement coupler, o-rings, clamps, and all required installation hardware. Now available with or without a Turbosmart Raceport BOV! The blow-off valve version releases excess pressure in the charge pipes when letting off the gas. ​In addition to intoxicating sound, it reduces compressor surge and improves overall reliability at higher boost levels. Compatible with factory tuning, JB4, and flash tuning. What's Included with the NON-BOV kit ES4715295: (see below for BOV kit) (1) Upper charge pipe (1) Lower charge pipe (1) 3R2.5 silicone coupler (1) 2.5" Tbolt clamp (1) 3" Tbolt clamp (3) 1/8NPT plugs (1) M6x1x16mm bolt (2) M6x1x20mm bolts (2) Small O rings (1) Large O ring What's Included with the BOV kit ES4715315: (1) Turbosmart Blow-Off Valve (1) Lower charge pipe (1) Upper charge pipe with BOV flange (1) 3R2.5 silicone coupler (1) 2.5" Tbolt clamp (1) 3" Tbolt clamp (5) 1/8NPT plugs (1) M6x1x16mm bolt (2) M6x1x20mm bolts (2) Small O rings (1) Large O ring (1) BOV adapter + E clip (2) 90* 1/8NPT to 1/4" push lock fittings (1) 30" 1/4" tubing
Show More Show Less
Burger Motorsports - Corporate Logo
T#:583132
Part#: BMSBSPGT14MM
Ships in 7 Business Days
$ 35.00 USD
Free Shipping on orders $49 and up

BMS Billet Spark Plug Gapper Tool - 14mm is an essential tool for achieving accurate and consistent spark plug gapping, ideal for automotive enthusiasts and professional mechanics alike. This precision tool helps maintain optimal plug performance by providing reliable, consistent gaps. Available in both 14mm and 12mm plug thread sizes, this tool is proudly made in the USA to deliver durability and precision.

  • Precisely gaps spark plugs for enhanced engine performance and efficiency
  • Speeds up the gapping process while ensuring accuracy and uniformity
  • Available in two sizes (14mm and 12mm) for a wider range of compatibility
  • Optional specialty feeler gauge included with 4 blades in thicknesses of .018, .020, .022, and .024
  • Made in the USA for premium quality and durability
Show More Show Less


Engine Cleaner - Gallon
2X Entries For Our G87 M2 Sweepstakes!
Griot's - Corporate Logo
T#:2498302
Part#: 11158
Ships in 8 Business Days
$ 34.99 USD
Free Shipping on orders $49 and up
Spray on Engine Cleaner and agitate the area with a detail brush to remove grease, oil, dirt, and grime.
Foaming Poly Gloss - 35 oz - Griot
2X Entries For Our G87 M2 Sweepstakes!
Griot's - Corporate Logo
T#:580307
Part#: B3303
In Stock
$ 26.99 USD
Free Shipping on orders $49 and up
Add hydrophobic protection and get more miles out of your shine
Microfiber Terry Weave Drying Towel
2X Entries For Our G87 M2 Sweepstakes!
Griot's - Corporate Logo
T#:2498299
Part#: 55517
In Stock
$ 26.99 USD
Free Shipping on orders $49 and up
Woven for success, this towel's unique soft terry loop weave delivers intense water absorption and safe drying.

Burger Motorsports JB4 Tuner - N63R - BMW G-Chassis
For G-Chassis Vehicles Only; Not for sale or use in California
Burger Motorsports - Corporate Logo
T#:600240
Part#: JB4-N63R-G
In Stock
$ 779.00 USD
Free Shipping
$ 779.00 USD
Free Shipping
The JB4 is the most advanced and highly featured tuning system available for your N63 powered vehicle. Power gains are up to 100whp and 140wtq on a stock car. The JB4 features a simple plug and play installation harness for easy installation & removal and includes many features not found with any other tune. Including on the fly in dash map switching between factory and various performance maps, optional in-dash gauge displays for boost, boost limiting by gear for improved traction in lower gears, progressive water/methanol support, built-in data logging, built-in code reading, optional direct EWG control to prevent throttle closure with exhaust modifications, exhaust flapper control, and much more. Other more expensive tuners may claim to equal the JB4's technology but upon closer examination lack most if not all of the JB4's features. Remember the JB4 does not require any additional modifications or previous stages. Simply install the JB4 as your first and only modification and enjoy an entirely new fast and smooth racing experience. The JB4 also does not require any user setup or customization but for those who are interested in logging, adding new features as we post them, etc, we suggest the BMS DATA cable or REV3 mobile phone adapter. JB4 Features and Benefits Power gains of up to 100hp and 140tq to the wheels on a stock vehicle Improves 0-60 times and 1/4 mile times The JB4 offers a lot more performance, functionality, and safety than your average performance chip Quick Plug & Play Installation Includes the rugged JB4 billet aluminum enclosure for protection CANbus OBDII integration offering unrivaled tuning features and performance Improved performance over non-integrated chip tunes Runs as smoothly as stock, this is how your vehicle should have come from the factory Compatible with all driving modes Fuel economy unchanged during normal driving Compatible with JB4 Mobile for smartphone logging, tuning changes, and adjustment 91 octane fuel or better required for performance gains Ethanol (E85) compatible tuning maps Able to read/delete fault codes Not VIN locked and can be removed without a trace and resold down the road Made in the USA Free USA Shipping 5 year warranty Note: For off-road racing use only. Not for sale or use in California.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:26438196
Part#: BMWJACKPADSILR4
Ships in 1 Business Day
$ 77.99 USD
Free Shipping on orders $49 and up
Burger Motorsports - Corporate Logo
T#:20815186
Part#: BMSDDP5800
Ships in 1 Business Day
Starting at $ 120.00 USD
Free Shipping on orders $49 and up
Starting at $ 120.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports DDP 5800 water methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. Available with built-in quick connect fittings for 1/4" WMI line or with open 3/8" NPT threads if you plan to use braided lines.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:21209837
Part#: BMS-ETLN20
In Stock
$ 199.00 USD
Free Shipping on orders $49 and up
BMS Elite titanium lug nuts are up to 50% lighter than equivalent OEM steel lugs, have a high tensile strength, and do not succumb to heat degradation, rust, or corrosion. Material: Hot forged grade 5 titanium Ti-6AL-4V Color: Black Wight: 22g each Thread: M14x1.25 Seat: 60º Cone/Conical Hex Head: 19mm Type: Open Set: 20 Lug Nuts
Show More Show Less
Wheel Cleaner - 1 gallon - Griot's Garage
2X Entries For Our G87 M2 Sweepstakes!
Griot's - Corporate Logo
T#:11850
Part#: 11107
Ships in 8 Business Days
$ 34.99 USD
Free Shipping on orders $49 and up
This highly-concentrated formula clings, penetrates, and loosens brake dust, grit, and road grime.

PFM Terry Weave Drying Towel
2X Entries For Our G87 M2 Sweepstakes!
Griot's - Corporate Logo
T#:2498360
Part#: 55590
Ships in 8 Business Days
$ 39.99 USD
Free Shipping on orders $49 and up
Become a drying superhero with the most absorbent towel you'll ever use. It's so absorbent, it will pull rain from the clouds.

BOSS 5" Fanned Orbital Backing Plate
2X Entries For Our G87 M2 Sweepstakes!
Griot's - Corporate Logo
T#:2181307
Part#: B5FBP
Ships in 8 Business Days
$ 39.99 USD
Free Shipping on orders $49 and up
This new backing plate technology was developed exclusively for our G15 and G21 machines and is undeniably best in class.
Fine Glass Polish - 16oz
2X Entries For Our G87 M2 Sweepstakes!
Griot's - Corporate Logo
T#:2498303
Part#: 11017
Ships in 8 Business Days
$ 22.99 USD
Free Shipping on orders $49 and up
Fine Glass Polish is for mild spots you normally see on your windshield, sunroof, and side glass.
Foaming Surface Wash - 35 oz - Griot
2X Entries For Our G87 M2 Sweepstakes!
Griot's - Corporate Logo
T#:580304
Part#: B3203
In Stock
$ 21.99 USD
Free Shipping on orders $49 and up
This fluffy foam gently loosens, lifts, encapsulates, and releases contaminants, deep cleaning your paint while avoiding wash-induced


PFM Wax Removal Towels - Set of 4
2X Entries For Our G87 M2 Sweepstakes!
Griot's - Corporate Logo
T#:2438629
Part#: 55525
In Stock
$ 21.99 USD
Free Shipping on orders $49 and up
Take advantage of PFM's unique microfiber terry weave and cut through wax residue like a hot knife through butter.
Griot
2X Entries For Our G87 M2 Sweepstakes!
Griot's - Corporate Logo
T#:11828
Part#: 11026
In Stock
$ 21.99 USD
Free Shipping on orders $49 and up
If you go a little too long between washings or you drive a vehicle with brakes that blacken your wheels, here's some much-needed help.
BOSS Fast Correcting Foam Pads - 6.5" - 2 Pack
2X Entries For Our G87 M2 Sweepstakes!
Griot's - Corporate Logo
T#:2498339
Part#: B110F6
In Stock
$ 29.99 USD
Free Shipping on orders $49 and up
Griot's most aggressive foam pad. It is designed to remove moderate to severe defects.

Griot's - Corporate Logo
T#:580292
Part#: B120F5
In Stock
$ 24.99 USD
Free Shipping on orders $49 and up
Excels at removing light to moderate swirls and flaws

Extra-Large PFM Edgeless Drying Towel - Griot
2X Entries For Our G87 M2 Sweepstakes!
Griot's - Corporate Logo
T#:579901
Part#: 55596
In Stock
$ 44.99 USD
Free Shipping on orders $49 and up
Need superior drying power? Unleash 1,044 square inches of thirsty ultra-premium microfiber.
Microfiber Plush Edgeless Towels, Set of 6
2X Entries For Our G87 M2 Sweepstakes!
Griot's - Corporate Logo
T#:2498298
Part#: 14901
In Stock
$ 29.99 USD
Free Shipping on orders $49 and up
The long, plush nap and edgeless design of these towels ensure nothing but supple microfiber touches your paint.

Brilliant Finish Foam Cannon
2X Entries For Our G87 M2 Sweepstakes!
Griot's - Corporate Logo
T#:2119669
Part#: 51185
In Stock
$ 64.99 USD
Free Shipping
$ 64.99 USD
Free Shipping
Create rich, clinging foam for efficient removal of shine-stealing abrasives and grime, while effortlessly creating lasting gloss and protection via your pressure washer.
Burger Motorsports - Corporate Logo
T#:20946755
Part#: 2G-ULPMT
In Stock
Starting at $ 179.00 USD
Free Shipping on orders $49 and up
Starting at $ 179.00 USD
Free Shipping on orders $49 and up
Integrated pump mount for a super clean install. This tank allows the pump (sold separately) to mount to the bottom of the tank making for a clean and fast installation. It’s universal and will fit a wide variety of trunk applications. The larger capacity means more time between fill ups. Offered in black for a stealth appearance and in clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Compatible with BMS DDP5800 pumps, ES4714512 or ES4714513 Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Pump mounts directly to the tank Compatible with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Available in black for a stealth appearance Includes 2-way vented black plastic cap 4 mounting holes in the feet of the tank Includes a compression pump feed fitting, 2 90 degree push fittings, 9" of methanol line and pump mounting hardware. Made in the USA Tank dimensions: L 15.5" x W 8" x H 8.25"
Show More Show Less

BOSS Perfecting Foam Pads - 6.5 inch - 2 pack - Griot
2X Entries For Our G87 M2 Sweepstakes!
Griot's - Corporate Logo
T#:580297
Part#: B130F6
In Stock
$ 29.99 USD
Free Shipping on orders $49 and up
Medium firmness, multi-purpose foam pads designed to remove light blemishes and hazing

Burger Motorsports - Corporate Logo
T#:38587638
Part#: JB4GEN1GEN2B58
EO#: D-744-4
In Stock
$ 599.00 USD
Free Shipping on orders $49 and up
$ 599.00 USD
Free Shipping on orders $49 and up
The JB4 is a powerful and versatile tuning system designed for BMW vehicles with GEN1 and GEN2 B58 engines. It delivers impressive power gains, adding up to 120 wheel horsepower (approximately 140hp at the crank) on a stock engine with pump gas. Performance can be further enhanced with supporting modifications such as bolt-ons, higher octane fuel, E85 blends, and upgraded turbochargers. ### Key Features: - **Plug-and-Play Installation** – Includes an easy-to-install harness for quick setup and removal with no permanent modifications. - **Multiple Tuning Maps** – Comes preloaded with up to eight custom maps optimized for different fuel types and modification levels, including E85 compatibility. - **Real-Time Data Monitoring** – Allows users to track and log up to 40 engine parameters via the JB4 app for precise tuning and performance adjustments. - **Boost by Gear Control** – Adjust boost levels in first, second, and third gears through the app to optimize traction and acceleration. - **Diagnostic Capabilities** – Reads and clears fault codes, assisting with diagnostics and maintenance. For those seeking even greater performance, Burger Motorsports offers a **475 Wheel Horsepower Package** for Gen2 B58 models, featuring the JB4 tuner and additional upgrades to push output up to 475whp, depending on fuel type. The JB4 is the ultimate tuning solution for BMW B58 owners looking to maximize power, drivability, and customization with advanced features and seamless integration.
Show More Show Less
Foaming Sprayer with Container - Griot
2X Entries For Our G87 M2 Sweepstakes!
Griot's - Corporate Logo
T#:579720
Part#: 51140
In Stock
$ 49.99 USD
Free Shipping on orders $49 and up

Foaming Sprayer with Container - Griot's Garage is designed to efficiently tackle washing even the dirtiest vehicles, including large trucks and RVs. This foaming sprayer enhances your cleaning routine by delivering a thick, clinging foam that allows the cleaning agent to work longer, effectively loosening and lifting dirt from your vehicle's surface. The foaming action provides excellent lubrication, which ensures a safer wash and reduces the risk of scratches. The sprayer gives you precise control over the amount of product used and features a removable reservoir for easy rinsing. It is versatile enough to clean wheels with Wheel Cleaner, engines with Engine Cleaner, and tires with Rubber Cleaner. Additionally, the sprayer aerates the cleaner, allowing you to use less product and save money. Once you try this convenient tool, you'll wonder how you managed without it.

  • Efficient Foam Application: Delivers thick foam that clings to surfaces, enhancing cleaning effectiveness.
  • Enhanced Lubrication: Provides a slick foam for a safer washing experience with reduced risk of scratches.
  • Versatile Use: Suitable for cleaning wheels, engines, and tires with various Griot's Garage cleaners.
  • Precise Control: Allows adjustment of product usage and easy rinsing with a removable reservoir.
  • Product Savings: Aerates the cleaner to use less product and save money.
Show More Show Less
BOSS Microfiber Buffing Pads - 3"- 3 Pack
2X Entries For Our G87 M2 Sweepstakes!
Griot's - Corporate Logo
T#:2498351
Part#: BMF3
In Stock
$ 29.99 USD
Free Shipping on orders $49 and up
Amplifies the effectiveness of the entire line of BOSS creams for rapid removal of moderate to severe defects


Burger Motorsports - Corporate Logo
T#:46993584
Part#: BMSGSIPU
Ships on Aug 6, 2026
$ 69.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports silicone intake pipe upgrade for the B58 BMW smooths the airflow from the intake to the factory turbo inlet by removing the bulky upper factory sound resonator and the lower accordion section of the air inlet pipe.
Show More Show Less