BMW 7 Series G11 (2016+)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

Burger Motorsports - Corporate Logo
T#:27171925
Part#: UNI-BMS-PIPLUGS
In Stock
$ 60.00 USD
Free Shipping on orders $49 and up
These dummy injectors fit in place of port injection fuel injectors to block the holes. Allows use to aluminum manifolds with port injection bungs without having to purchase fuel injectors. Plugs are EV14 injectors and measure 38mm or 1.5" from o-ring to o-ring.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:586269
Part#: BMSPBT
In Stock
$ 199.00 USD
Free Shipping
$ 199.00 USD
Free Shipping
The BMS Pedal Tuner is a BMW Performance Chip with a pre-programmed internal chip that intercepts the stock signals from your BMW's electronic control unit (ECU) and changes them to achieve better performance by adjusting the air-fuel ratio and spark timing. Made specifically for the BMW inline six-cylinder motors. The PBX also has an adjustable throttle feature that can be combined with the Performance chip feature by selecting a setting or "map". The BMS Pedal Tuner contains both a performance chip which gives you an extra 8-10 Horsepower at the wheels and an adjustable throttle boost feature that makes the gas pedal send a boosted throttle signal in increments of 30%, 60%, and 100% over the stock BMW signal. Depending on what setting/ "map" you select you can create a perfect blend of throttle response. The BMS Pedal Tuner will make your vehicle more responsive, spirited and fun to drive. It will make your vehicle faster by increasing the horsepower and torque. It works well with other modifications like intakes and exhausts, but can also be used alone. It will remove the "dead space" when you push on the non-responsive stock BMW accelerator. It changes the way the car drives and feels. You can turn it on and off from the comfort of your driver's seat to feel the difference. The BMS Pedal Tuner is a clear choice. Features: Throttle Re-mapping for Better Response / Reaction Removes "dead area" delay in gas pedal 7 Different Maps / Settings for more enjoyable driving Can be set and turned on and off from inside the car Invisible to dealers equipment Made in USA
Show More Show Less
Burger Motorsports - Corporate Logo
T#:26404907
Part#: 12MMSPG
In Stock
$ 35.00 USD
Free Shipping on orders $49 and up

Spark Plug Gapper Tool BMS Billet is essential for accurately adjusting the gap of spark plugs. This precision tool ensures that each plug is set to the exact specifications required for optimal engine performance. Made in the USA, it features a 12mm plug thread size, making it suitable for a wide range of applications.

  • Precision Adjustment: Allows for accurate gap adjustments to ensure optimal spark performance and engine efficiency.
  • Speed and Efficiency: Streamlines the process of gapping plugs while maintaining high precision, saving time and effort.
  • High-Quality Construction: Crafted from billet materials for durability and reliability, ensuring long-term use.
  • Lifetime Replacement Program: Comes with a lifetime replacement guarantee, reflecting confidence in the tool's quality and performance.

Upgrade your spark plug maintenance with the Spark Plug Gapper Tool BMS Billet for a reliable and precise solution.

Show More Show Less

Metal Oil Filter Housing Upgrade With Filter & Cooler - BMW Gen1 B58 ...
For earlier vehicles with the Gen1 B58 (B58A) - not compatible with the B58TU (B58D) en...
Burger Motorsports - Corporate Logo
T#:43378539
Part#: B58G1OFH
In Stock
$ 279.00 USD
Free Shipping on orders $49 and up
$ 279.00 USD
Free Shipping on orders $49 and up
Upgraded metal oil filter housing designed to replace the faulty stock housing which is known to crack.

Packaged by Turner - Corporate Logo
T#:402850
Part#: N63LMOCP1
In Stock
Starting at $ 167.96 USD
Free Shipping
Starting at $ 167.96 USD
Free Shipping

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication! 

Liqui Moly GmbH develops and tests all engine oils, additives, and car care products in-house, ensuring all Liqui Moly products extend the life of your engine via optimal lubrication. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world. Turner Motorsport trusts Liqui Moly to keep all of our race cars - including the M6 - running smooth from the first hotlap to the last.

Turner Motorsport Recommends three Liqui Moly oil options for your BMW:

Leichtlauf High Tech full synthetic engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption - most BMWs like to drink oil, Leichtlauf should make yours less thirsty. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth running gasoline and diesel engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, turbo, multi-valve, and supercharger compatibility, and long service life.

Synthoil Premium engine oil is designed to provide great engine wear protection as well as fuel savings and reduced oil consumption. Using proprietary blends of base oils and the latest additive technology, this full synthetic oil will ensure smooth running gasoline and diesel engines in both high and low temperatures.

New generation Molygen engine oil allows you to easily identify oil leaks with the included UV flashlight - BMWs are notorious for oil leaks, and this allows you to work towards solving this problem. Additionally, Molygen is a fully synthetic oil designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. 

Choose the level of Liqui Moly Oil Service your BMW deserves: 

  • Liqui Moly Bronze service involves switching to Liqui Moly oil without the introduction of additives.
  • Liqui Moly Silver service includes a Pro-Line Engine Flush to remove sludge and carbon buildup from the oil circulation system.
  • Liqui Moly Gold service includes Silver service and Jectron Fuel Injection System Cleaner. This cleans your injectors and maintains your fuel system to improves engine performance and efficiency.
  • Liqui Moly Platinum service includes Gold service and Cera Tec Oil Additive. This prevents wear and reduces friction to improve engine performance and efficiency.

Below you can add new drain plug and crush washer, along with your choice of oil filter.

This kit also features many Popular Service Tools that make your life easier when working on your BMW:

  • Turner Motorsport Magnetic Fender Cover
  • Schwaben 6.5L Fluid Extractor
  • Schwaben 14mm/17mm Service Wrench
  • Schwaben Professional BMW/MINI Scan Tool

Have you ever been bent over your engine bay for a few hours and noticed that your belt scratched your fender? We've got you covered with the Turner Motorsport Magnetic Fender Cover. We also offer a myriad of Schwaben tools. Schwaben's Professional Scan Tool vastly simplifies diagnosing your BMW. This scan tool offers OE-level diagnostics for over 25 years of models, also allowing you to access common service features like resetting your oil service light, installing a new battery, throttle body adjustment, DPF regeneration, and more. The Schwaben Fluid extractor allows you displace 6.5L of fluid without making a mess of your workspace. Lastly, we've found that the 14mm/17mm service wrench allows you to service most of your vehicle with just one tool - one of the biggest hangups with working on a vehicle is losing your tools. Save yourself time looking for multiple different tools across your garage by owning one that does it all.

These products fit the following BMWs:

2011– 2013 E70 X5 xDrive50i
2008– 2013 E71 X6 xDrive50i
2009+ F01/F02 750i 750Li sDrive/xDrive 750i 750Li sDrive/xDrive
2010– 2012 F07 550i GT sDrive/xDrive
2011+ F10/F11 550i sDrive/xDrive
2012+ F12/F13 650i sDrive/xDrive 650i sDrive/xDrive
2013– F07 550i GT sDrive/xDrive
2014– F15 X5 xDrive50i

 

Show More Show Less

Burger Motorsports - Corporate Logo
T#:38621407
Part#: BMS-TCBS
Back Ordered
$ 25.00 USD
Free Shipping on orders $49 and up
Replace your fragile OEM plastic coolant bleeder screw, which is prone to cracking and failure, with a premium titanium upgrade built for strength and style under the hood. Factory plastic components weaken over time due to constant heat cycles, leading to brittleness and potential failure. Our titanium replacement delivers superior durability, being twice as strong as aluminum yet 45% lighter than steel, ensuring unmatched resilience and long-term reliability for your coolant system. More than an upgrade, it’s a must-have for engine longevity. CNC-machined from solid titanium, each screw features a laser-etched Burger Motorsports logo and is hand-burned to create unique color patterns—no two are alike. A heavy-duty replacement O-ring is included for a perfect fit.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:598298
Part#: JB4-SPWCK-F
In Stock
$ 159.00 USD
Free Shipping
$ 159.00 USD
Free Shipping
The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it in to the JB4 where your BMS DATA cable connects, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS®, or Android and sold separately via the Apple® or Android® app store on your phone. The wireless adapter is not compatible with the JB4 windows interface. See our other listings for the "BMS DATA cable" for laptop use.
Show More Show Less

JB4 Bluetooth Wireless Connect Kit - Separate Power Wire - E-Chassis ...
For use with older E chassis BMW JB4 systems with the square plastic case.
Burger Motorsports - Corporate Logo
T#:403194
Part#: JB4-BT
In Stock
$ 149.00

This product was last offered at the strikethrough price on
05-13-2026

$ 99.00 USD
Free Shipping
$ 99.00 USD
Free Shipping
The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real-time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it into the JB4 where your BMS DATA cable connects, attach the power and ground wire to the JB4 harness using the included connectors, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS, or Android® and sold separately via the Apple® or Android® app store on your phone. This adapter is not compatible with the JB4 windows interface.
Show More Show Less

Metal Oil Filter Housing Upgrade With Filter & Cooler - BMW B58TU (B5...
For later vehicles with the Gen2 B58 (B58TU/B58C/B58D) engine and without the Motorspor...
Burger Motorsports - Corporate Logo
T#:43378540
Part#: B58G2OFH
Back Ordered
$ 279.00 USD
Free Shipping on orders $49 and up
$ 279.00 USD
Free Shipping on orders $49 and up
Upgraded metal oil filter housing designed to replace the faulty stock housing which is known to crack.
Prosport Performance - Corporate Logo
T#:385025
Part#: HEA-WRAPKIT-25
Ships in 2 Business Days
$ 29.99 USD
Free Shipping on orders $49 and up

Constructed for durability with a tight weave, this heat wrap is designed to maintain proper thermal properties in your vehicles exhaust system. This material was hand selected specifically for it's heat characteristics and flexibility. Fiberglass is rated for 1200 degrees, however, this titanium wrap can withstand 1800 degrees! 

Key Features:

  • 2" wide x 1/16" thick
  • Durable, tightly woven, 100% fiberglass
  • Reduce under hood temperatures
  • Protect other engine components
  • Protect your hands/arms from burns
  • Each roll comes with 5 FREE, 14" long stainless steel zip ties
Show More Show Less
Burger Motorsports - Corporate Logo
T#:20815185
Part#: BMSWMITC
Ships in 2 Business Days
$ 59.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports custom billet Water/Methanol Injection (WMI) cap includes an integrated heavy-duty check valve to let much-needed air in and prevent dangerous WMI vapor/fumes and liquid from getting out! Each cap is CNC machined in the USA from a solid block of billet aluminum, engraved with the BMS logo, and anodized blue for protection. Check valve piston must be lightly lubricated if tank shows signs of vacuum. One drop of penetrating oil or motor oil in the top will keep the check valve operational. Features and Benefits Integrated heavy-duty check valve lets air in but not out Specifically designed to prevent evaporation Keeps vapors inside the tank Made from a solid block of billet aluminum Blue anodizing for corrosion protection Exaggerated grips for easy removal Integrated heavy-duty o-ring Made in the USA
Show More Show Less


Prosport Performance - Corporate Logo
T#:385019
Part#: HEA-WRAPKIT-50
In Stock
$ 49.99 USD
Free Shipping on orders $49 and up
Constructed for durability with a tight weave, this heat wrap is designed to maintain proper thermal properties in your vehicles exhaust system. This material was hand selected specifically for it's heat characteristics and flexibility. Fiberglass is rated for 1200 degrees, however, this titanium wrap can withstand 1800 degrees!
Show More Show Less
Burger Motorsports - Corporate Logo
T#:558165
Part#: 1G-MT-CL
In Stock
$ 30.00 USD
Free Shipping on orders $49 and up
The least expensive option available from BMS, this 1 gallon tank is compact and flexible allowing for a wide range of mounting on any flat vertical surface in the trunk. The tank is clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 11" x W 4.5 x H 9"
Show More Show Less

Prosport Performance - Corporate Logo
T#:385020
Part#: HEA-GWRAP-15
Back Ordered
$ 33.99 USD
Free Shipping on orders $49 and up
Constructed of laminated light-weight glass cloth, this gold reflective heat tape is designed to reflect 80% of radiant heat. With excellent pliability, this tape is easy to install. It's as simple as peel and stick.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:21012607
Part#: JBPLUS-B58-3W
In Stock
$ 239.00 USD
Free Shipping on orders $49 and up
The popular and well-proven JB Plus quick install tuner is available for B46, B48, and B58 applications! Boost is user adjustable up to 4.5psi over stock providing gains up to 30 wheel horsepower and 40 wheel torque on the B48 motor and up to 40 wheel horsepower and 50 wheel torque on the B58 motor. Timing and fueling remains managed seamlessly by the DME, preserving all factory safety systems. While the JB4 is the ultimate tuning tool the JB Plus (JB+) is a quick and simple way to add a few HP with minimal cost and minimal install effort. Something that anyone can buy, install in under a minute, and really feel from the driver's seat. The fuel economy during normal driving is unchanged. Automatically detects the engine type upon installation allowing the same unit to be used for any B48 B58 F series application!
Show More Show Less
Burger Motorsports - Corporate Logo
T#:40004848
Part#: JB4-B48
In Stock
$ 599.00 USD
Free Shipping on orders $49 and up
The JB4 is the most advanced and highly featured tuning system available for your B38, B46, and B48 powered BMW. Power gains are up to 40hp to the wheels (55hp crank) for a B48, gains with bolt-on parts, higher octane, E85 mixtures, and larger turbos are even higher. The JB4 features a simple plug & play installation harness for easy installation & removal and includes many features not found with any other tune. Including on the fly in-dash map switching between factory and various performance maps, optional in-dash gauge displays for boost, boost limiting by gear for improved traction in lower gears, progressive water/methanol support, built-in data logging, built-in code reading, optional direct EWG control to prevent throttle closure with exhaust modifications, exhaust flapper control, and much more. Other more expensive tuners may claim to equal the JB4's technology but upon closer examination lack most if not all of the JB4's features. Remember the JB4 does not require any additional modifications or previous stages. Simply install the JB4 as your first and only modification and enjoy an entirely new fast and smooth racing experience. The JB4 also does not require any user setup or customization, but for those who are interested in logging, adding new features as we post them, etc, we suggest the BMS DATA cable or JB4 mobile phone adapter. The JB4 automatically detects between the B38, B46, B48 models at boot up making installation and setup a snap. Wirelessly connect the JB4 to your Bluetooth 4.0 compatible iOS and Android device via the JB4 Mobile connect kit or to your Windows laptop with the BMS data cable. Both options allow you to record and analyze vehicle and tuning data, change JB4 performance maps, and update JB4 firmware as we release free newer versions with updates, more powerful maps, and new features under development. A separate JB4 Mobile app purchase is also required. JB4 Map Guide: Map0: Stock tuning, fully disable JB4 Map1: 3psi over stock added (91 octane) Map2: 4psi over stock added (91-93 octane) Map3: 6psi over stock added (93+ octane) Map4: Absolute target map with peak target of 20psi (93+ and/or 30% E85, EWG connector suggested) Map5: Absolute target map with peak target of 22psi (30% E85+ fuel, EWG connector suggested) Map6: Custom tuning map -- see details on JB4tech.com B58 JB4 page Map7: Progressive WMI map with tuning a function of meth flow and user-defined boost additive. Map8: VALET / Low Boost Map JB4 Power Gains, Features, & Benefits Power gains of up to 100hp to the wheels on a stock vehicle Improves 0-60 times and 1/4 mile times Preloaded with custom JB4 BMW tuning software and up to 8 maps for various fuel and modification levels Ethanol (E85) compatible tuning maps Able to read/delete fault codes View and record up to 40 different gauges/engine parameters in real time with the JB4 app. Boost by gear in 1st, 2nd, and 3rd can be controlled via the JB4 app for a perfect launch Exhaust flap operation can be controlled in most JB4 applications Compatible with JB4 Mobile for smartphone logging, tuning changes, and adjustment The JB4 offers a lot more performance, functionality, and safety than your average performance chip Quick Plug & Play Installation CANbus OBDII integration offering unrivaled tuning features and performance Improved performance over non-integrated chip tunes Runs as smoothly as stock, this is how your vehicle should have come from the factory Compatible with all driving modes Fuel economy unchanged during normal driving 91 octane fuel or better required for performance gains Not VIN locked and can be removed without a trace and resold down the road Includes the rugged JB4 billet aluminum enclosure for protection Designed and assembled in the USA Free USA Shipping 5-year warranty Note for 2018+ G chassis vehicles with the digital dash layout we have not yet added in the JB4 commands to allow in-dash control but will provide those via a free firmware update once developed. Until then a JB4 mobile adapter or BMS data cable is required for any map and setting changes.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:9803960
Part#: BMWJACKPADRED4
Ships in 3 Business Days
$ 79.99 USD
Free Shipping
$ 79.99 USD
Free Shipping

Ensure safe and professional jacking of your BMW, 2020 Supra, or MINI with the Turner Motorsport Jack Pad Adapter. Designed to mimic the factory scissor jack, this adapter allows for secure lifting at any of the 4 factory jack points without causing damage to your vehicle. Made in the USA from solid billet aluminum, it features the Burger Motorsports logo and a honeycomb grip pattern for stability. Simple to use and compatible with most floor jacks, it ensures correct and secure lifting every time. Here are the key benefits:

  • Safely lifts your BMW, 2020 Supra, or MINI at factory jack points
  • Prevents damage to rocker panels or vehicle undercarriage
  • Made from solid billet aluminum for durability
  • Engraved Burger Motorsports logo for authenticity
  • Honeycomb grip pattern for stability during use
Show More Show Less
Prosport Performance - Corporate Logo
T#:31390598
Part#: PSTOP270-12
In Stock at Vendor
$ 45.00 USD
Free Shipping on orders $49 and up

52mm Prosport Electrical Oil Pressure Gauge - Clear Lens/White LED provides precise monitoring of engine oil pressure, ensuring that drivers can detect issues before they become catastrophic. This high-quality gauge is crucial for tracking engine performance and preventing potential damage.

  • Accurate Oil Pressure Monitoring: Measures oil pressure from 0-100 PSI, helping to prevent engine damage by providing early warnings.
  • Clear Lens: Offers a clear and unobstructed view of the gauge readings, making it easy to monitor engine health at a glance.
  • White LED Backlighting: Enhances readability in low-light conditions with a bright and clear display.
  • Complete Kit: Includes sender, mounting hardware, visor, decals, and instructions for easy installation.
  • Durable Construction: Designed to withstand the demands of high-performance driving and continuous use.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:21045500
Part#: BMS-BOFC
In Stock
Starting at $ 79.00 USD
Free Shipping on orders $49 and up
Starting at $ 79.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports billet aluminum B58 oil filter cover directly replaces your weak OE plastic cap for greater protection, ease of removal/install, and great looks under the hood. You can use a 3/8" inch drive ratchet or torque wrench to install and remove. The built-in 32mm hex head does not require a special removal/install tool like the factory cap. Uses the OE oil filter, filter housing o-ring, and filter insert. Anodized for protection. This quality part is a must for any serious BMW owner. Install: After removing the OEM oil filter cap, remove the filter and be sure to remove the plastic oil filter bypass valve and transfer it to the new BMS billet oil filter cap. Be sure to replace the exterior o-ring gasket also when installing. Features and Benefits Solid aluminum design is much stronger than brittle plastic Integrated heat sinks for better oil cooling Special tools are not required for removal/install like the factory cap Strong design won't fail under pressure Reuses OE filter insert and o-ring Anodized for protection Looks great under the hood Available in black, red, silver, and blue Made in the USA
Show More Show Less

Prosport Performance - Corporate Logo
T#:389617
Part#: 216EVOEOP.PSI
In Stock
$ 124.99 USD
Free Shipping
$ 124.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • Digital Oil Pressure Guage (0-150 PSI) 
  • Instructions
  • Mounting hardware
  • Decals
  • Premium Electric Sender 
  • Wiring harness adapter
  • Dual color display (Blue or Red)
Show More Show Less
Burger Motorsport JB4 Performance Tuner - BMW F22/23 F3X G01/G02 Gen1...
For models with the earlier Gen1 B58 engine only
Not for sale or use in the state of California.
Burger Motorsports - Corporate Logo
T#:587915
Part#: JB4-B58
In Stock
$ 599.00 USD
Free Shipping
$ 599.00 USD
Free Shipping
The JB4 is the most advanced and highly featured tuning system available for your B58 and B48 vehicle. Power gains are up to 60hp to the wheels (80hp crank) on a completely stock car on pump gas for a B58 and up to 40hp to the wheels (55hp crank) for a B48, gains with bolt on parts, higher octane, and larger turbos are even higher. The JB4 features a simple plug and play installation harness for easy installation & removal and includes many features not found with any other tune. Including on the fly in dash map switching between factory and various performance maps, optional in dash gauge displays for boost, boost limiting by gear for improved traction in lower gears, progressive water/methanol support, built in data logging, built in code reading, optional direct EWG control to prevent throttle closure with exhaust modifications, exhaust flapper control, and much more. Other more expensive tuners may claim to equal the JB4's technology but upon closer examination lack most if not all of the JB4's features. Remember the JB4 does not require any additional modifications or previous stages. Simply install the JB4 as your first and only modification and enjoy an entirely new fast and smooth racing experience. The JB4 also does not require any user setup or customization but for those who are interested in logging, adding new features as we post them, etc, we suggest the BMS DATA cable or REV3 mobile phone adapter. The JB4 automatically detects between the B46, B48, and B58 models at boot up making installation and setup a snap.
Show More Show Less
Genuine BMW - Corporate Logo
T#:402828
Part#: 07119905428KT
In Stock
$ 21.99 USD
Free Shipping on orders $49 and up

This genuine BMW replacement oil drain plug with washer is perfect to replace your old beat up or stripped oil plug for easy removal and oil changes.


Genuine BMW Screw Plug
This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E53 48IS,E38,E39,E53 X5 X5,E63,E65,E70 X5,E71 X6,F01,F02,F06,F10,F12,F13,F15,F16

Show More Show Less


Radium Engineering - Corporate Logo
T#:27905095
Part#: 20-0024
In Stock at Vendor
$ 28.99 USD
Free Shipping on orders $49 and up

Includes:

Anodized 4AN ORB Barbed Adapter Fitting, Black Ball Valve with 1/4" Barbs, 125psi @ 140F 4 feet of Radium 1/4" PCV Hose

Burger Motorsports - Corporate Logo
T#:21209828
Part#: B58G2CP
Back Ordered
Starting at $ 299.00 USD
Free Shipping on orders $49 and up
Starting at $ 299.00 USD
Free Shipping on orders $49 and up
Replace the failure prone plastic charge pipe that came on your car before it leaves you stranded! The BMS Elite B58TU charge pipe upgrade is constructed from high-gauge aluminum and features a CNC throttle body and turbo flange for a snug, OEM-style fit. It features a glossy black powder coat to coordinate with the engine bay and includes three 1/8" NPT bungs ideal for an external boost gauge or methanol nozzles. With a double o-ring seal design on the chargepipe flange that attaches to the turbo, this chargepipe is designed to withstand up to 40+psi of high boost. Also includes a heavy-duty replacement coupler, o-rings, clamps, and all required installation hardware. Now available with or without a Turbosmart Raceport BOV! The blow-off valve version releases excess pressure in the charge pipes when letting off the gas. ​In addition to intoxicating sound, it reduces compressor surge and improves overall reliability at higher boost levels. Compatible with factory tuning, JB4, and flash tuning. What's Included with the NON-BOV kit ES4715295: (see below for BOV kit) (1) Upper charge pipe (1) Lower charge pipe (1) 3R2.5 silicone coupler (1) 2.5" Tbolt clamp (1) 3" Tbolt clamp (3) 1/8NPT plugs (1) M6x1x16mm bolt (2) M6x1x20mm bolts (2) Small O rings (1) Large O ring What's Included with the BOV kit ES4715315: (1) Turbosmart Blow-Off Valve (1) Lower charge pipe (1) Upper charge pipe with BOV flange (1) 3R2.5 silicone coupler (1) 2.5" Tbolt clamp (1) 3" Tbolt clamp (5) 1/8NPT plugs (1) M6x1x16mm bolt (2) M6x1x20mm bolts (2) Small O rings (1) Large O ring (1) BOV adapter + E clip (2) 90* 1/8NPT to 1/4" push lock fittings (1) 30" 1/4" tubing
Show More Show Less
Burger Motorsports - Corporate Logo
T#:51848519
Part#: G12B48CP
Ships on Aug 10, 2026
New Item
$ 299.00 USD
Free Shipping on orders $49 and up
$ 299.00 USD
Free Shipping on orders $49 and up
The BMS Gen 1 B48 charge pipe upgrade is constructed from high-gauge aluminum and features a CNC throttle body and turbo flange for a snug, OEM-style fit. It is completed with a black textured finish to coordinate with the engine bay and boasts two 1/8" NPT bungs ideal for an external boost gauge or methanol nozzles. Also includes a heavy-duty replacement coupler, o-rings, clamps, and all required installation hardware.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:583132
Part#: BMSBSPGT14MM
Ships in 8 Business Days
$ 35.00 USD
Free Shipping on orders $49 and up

BMS Billet Spark Plug Gapper Tool - 14mm is an essential tool for achieving accurate and consistent spark plug gapping, ideal for automotive enthusiasts and professional mechanics alike. This precision tool helps maintain optimal plug performance by providing reliable, consistent gaps. Available in both 14mm and 12mm plug thread sizes, this tool is proudly made in the USA to deliver durability and precision.

  • Precisely gaps spark plugs for enhanced engine performance and efficiency
  • Speeds up the gapping process while ensuring accuracy and uniformity
  • Available in two sizes (14mm and 12mm) for a wider range of compatibility
  • Optional specialty feeler gauge included with 4 blades in thicknesses of .018, .020, .022, and .024
  • Made in the USA for premium quality and durability
Show More Show Less

Burger Motorsports JB4 Tuner - N63R - BMW G-Chassis
For G-Chassis Vehicles Only; Not for sale or use in California
Burger Motorsports - Corporate Logo
T#:600240
Part#: JB4-N63R-G
In Stock
$ 779.00 USD
Free Shipping
$ 779.00 USD
Free Shipping
The JB4 is the most advanced and highly featured tuning system available for your N63 powered vehicle. Power gains are up to 100whp and 140wtq on a stock car. The JB4 features a simple plug and play installation harness for easy installation & removal and includes many features not found with any other tune. Including on the fly in dash map switching between factory and various performance maps, optional in-dash gauge displays for boost, boost limiting by gear for improved traction in lower gears, progressive water/methanol support, built-in data logging, built-in code reading, optional direct EWG control to prevent throttle closure with exhaust modifications, exhaust flapper control, and much more. Other more expensive tuners may claim to equal the JB4's technology but upon closer examination lack most if not all of the JB4's features. Remember the JB4 does not require any additional modifications or previous stages. Simply install the JB4 as your first and only modification and enjoy an entirely new fast and smooth racing experience. The JB4 also does not require any user setup or customization but for those who are interested in logging, adding new features as we post them, etc, we suggest the BMS DATA cable or REV3 mobile phone adapter. JB4 Features and Benefits Power gains of up to 100hp and 140tq to the wheels on a stock vehicle Improves 0-60 times and 1/4 mile times The JB4 offers a lot more performance, functionality, and safety than your average performance chip Quick Plug & Play Installation Includes the rugged JB4 billet aluminum enclosure for protection CANbus OBDII integration offering unrivaled tuning features and performance Improved performance over non-integrated chip tunes Runs as smoothly as stock, this is how your vehicle should have come from the factory Compatible with all driving modes Fuel economy unchanged during normal driving Compatible with JB4 Mobile for smartphone logging, tuning changes, and adjustment 91 octane fuel or better required for performance gains Ethanol (E85) compatible tuning maps Able to read/delete fault codes Not VIN locked and can be removed without a trace and resold down the road Made in the USA Free USA Shipping 5 year warranty Note: For off-road racing use only. Not for sale or use in California.
Show More Show Less
Prosport Performance - Corporate Logo
T#:389634
Part#: 216EVOOT.F
Ships in 2 Business Days
$ 78.99 USD
Free Shipping
$ 78.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • Digital Oil Temperature Guage (100-300 degrees) 
  • Instructions
  • Mounting hardware
  • Decals
  • Temperature sender - 1" long with 1/8" NPT threads
  • Dual color display (Blue or Red)
Show More Show Less

Prosport Performance - Corporate Logo
T#:389626
Part#: 216EVOWGWT.F
Ships in 3 Business Days
$ 78.99 USD
Free Shipping
$ 78.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • Digital Water Temperature Guage (80-280 degrees) 
  • Instructions
  • Mounting hardware
  • Decals
  • Temperature sender - 1" long with 1/8" NPT threads
  • Dual color display (Green or White)
Show More Show Less
Burger Motorsports - Corporate Logo
T#:26438196
Part#: BMWJACKPADSILR4
Ships in 2 Business Days
$ 77.99 USD
Free Shipping on orders $49 and up

Burger Motorsports - Corporate Logo
T#:20815186
Part#: BMSDDP5800
In Stock
Starting at $ 120.00 USD
Free Shipping on orders $49 and up
Starting at $ 120.00 USD
Free Shipping on orders $49 and up
The Burger Motorsports DDP 5800 water methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. Available with built-in quick connect fittings for 1/4" WMI line or with open 3/8" NPT threads if you plan to use braided lines.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:21209837
Part#: BMS-ETLN20
In Stock
$ 199.00 USD
Free Shipping on orders $49 and up
BMS Elite titanium lug nuts are up to 50% lighter than equivalent OEM steel lugs, have a high tensile strength, and do not succumb to heat degradation, rust, or corrosion. Material: Hot forged grade 5 titanium Ti-6AL-4V Color: Black Wight: 22g each Thread: M14x1.25 Seat: 60º Cone/Conical Hex Head: 19mm Type: Open Set: 20 Lug Nuts
Show More Show Less
Burger Motorsports - Corporate Logo
T#:38587638
Part#: JB4GEN1GEN2B58
EO#: D-744-4
In Stock
$ 599.00 USD
Free Shipping on orders $49 and up
$ 599.00 USD
Free Shipping on orders $49 and up
The JB4 is a powerful and versatile tuning system designed for BMW vehicles with GEN1 and GEN2 B58 engines. It delivers impressive power gains, adding up to 120 wheel horsepower (approximately 140hp at the crank) on a stock engine with pump gas. Performance can be further enhanced with supporting modifications such as bolt-ons, higher octane fuel, E85 blends, and upgraded turbochargers. ### Key Features: - **Plug-and-Play Installation** – Includes an easy-to-install harness for quick setup and removal with no permanent modifications. - **Multiple Tuning Maps** – Comes preloaded with up to eight custom maps optimized for different fuel types and modification levels, including E85 compatibility. - **Real-Time Data Monitoring** – Allows users to track and log up to 40 engine parameters via the JB4 app for precise tuning and performance adjustments. - **Boost by Gear Control** – Adjust boost levels in first, second, and third gears through the app to optimize traction and acceleration. - **Diagnostic Capabilities** – Reads and clears fault codes, assisting with diagnostics and maintenance. For those seeking even greater performance, Burger Motorsports offers a **475 Wheel Horsepower Package** for Gen2 B58 models, featuring the JB4 tuner and additional upgrades to push output up to 475whp, depending on fuel type. The JB4 is the ultimate tuning solution for BMW B58 owners looking to maximize power, drivability, and customization with advanced features and seamless integration.
Show More Show Less
Prosport Performance - Corporate Logo
T#:389632
Part#: 216EVOVO
In Stock
$ 71.99

This product was last offered at the strikethrough price on
05-03-2026

$ 65.99 USD
Limited Qty Sale
Free Shipping
$ 71.99

This product was last offered at the strikethrough price on
05-03-2026

$ 65.99 USD
Limited Qty Sale
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • Digital Fuel Pressure Guage (8-18v) 
  • Instructions
  • Mounting hardware
  • Decals
  • Dual color display (Blue or red)
Show More Show Less


Prosport Performance - Corporate Logo
T#:587021
Part#: 216BFWAEBOSM.PSI
Ships in 2 Business Days
$ 80.99 USD
Free Shipping
$ 80.99 USD
Free Shipping

Enhance your BMW or MINI vehicle's performance monitoring with the 52mm Electric Boost Gauge - 30inHg~30 PSI Amber/White. This gauge provides accurate readings of boost pressure, ensuring you stay informed about your engine's performance at all times. With its stylish amber and white display, it not only looks sleek but also offers clear visibility day or night. Easy to install and compatible with a range of BMW and MINI models, this gauge is a must-have for enthusiasts looking to monitor their boost levels effectively.

  • Accurately monitors boost pressure from 30inHg to 30 PSI
  • Stylish amber and white display for clear visibility
  • Enhances vehicle performance monitoring capabilities
  • Easy installation process
  • Compatible with various BMW and MINI models

Upgrade your BMW or MINI with the 52mm Electric Boost Gauge - 30inHg~30 PSI Amber/White to keep track of your boost levels with precision and style.

Show More Show Less
Prosport Performance - Corporate Logo
T#:389614
Part#: 216EVOWGBO.PSI
In Stock
$ 109.99 USD
Free Shipping
$ 109.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • 52mm Digital Boost Pressure Guage (30inHg - 35 PSI) 
  • Instructions
  • Tubing Kit
  • T-adapter
  • Premium Electric Sender
  • Mounting hardware
  • Green or White display
Show More Show Less
Prosport Performance - Corporate Logo
T#:389627
Part#: 216EVOWGOT.F
In Stock
$ 78.99 USD
Free Shipping
$ 78.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • Digital Oil Temperature Guage (100-300 degrees) 
  • Instructions
  • Mounting hardware
  • Decals
  • Temperature sender - 1" long with 1/8" NPT threads
  • Dual color display (Green or White)
Show More Show Less

Prosport Performance - Corporate Logo
T#:584307
Part#: 216BFWAOPSM.PSI
Ships in 2 Business Days
$ 69.99 USD
Free Shipping
$ 69.99 USD
Free Shipping

Ensure optimal engine monitoring for your BMW with the aftermarket 0-100 PSI gauge kit, offering enhanced visibility and early detection of potential issues. Avoid costly engine damage by monitoring engine functions at a glance, providing peace of mind and proactive maintenance.

  • Improves engine monitoring beyond factory gauge capabilities
  • Early detection of potential issues for preventive maintenance
  • Comprehensive kit includes sender, mounting hardware, visor, decals, and instructions
  • Compatible with BMW models for easy installation and reliable performance
  • Note: Consider our Oil Filter Adaptor Plate for easier sender installation; Subaru owners can use Oil Galley plugs for direct engine block screw-in.
Show More Show Less

Prosport Performance - Corporate Logo
T#:389613
Part#: 216EVOBO.PSI
In Stock
$ 109.99 USD
Free Shipping
$ 109.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • 52mm Digital Boost Pressure Guage (30inHg - 35 PSI) 
  • Instructions
  • Tubing Kit
  • T-adapter
  • Premium Electric Sender
  • Mounting hardware
  • Blue or Red display
Show More Show Less
Prosport Performance - Corporate Logo
T#:389622
Part#: 175CLSMARBO-R.PS
In Stock
$ 92.99 USD
Free Shipping
$ 92.99 USD
Free Shipping

In boosted applications, it's crucial to know the amount of boost pressure you are carrying in order to optimize performance. This 45mm boost gauge from Prosport is the best way to do just that. Featuring a black face, with amber back lighting it will portray your information accurately without blinding you in the process. This guage is designed to used precision electric sensors, so you get the most accurate reading every time. 

Key Features:

  • 270 degree dial sweep
  • Track tested and race proven
  • Full gauge sweep on start up
  • Black face, red needle, amber backlit
  • 30inHg to 30PSI
  • 45mm diameter
  • Includes: Tubing kit, T-Adapter, Electric Sender, quick connect pigtail wiring, Decal and Instructions.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:20946755
Part#: 2G-ULPMT
In Stock
Starting at $ 179.00 USD
Free Shipping on orders $49 and up
Starting at $ 179.00 USD
Free Shipping on orders $49 and up
Integrated pump mount for a super clean install. This tank allows the pump (sold separately) to mount to the bottom of the tank making for a clean and fast installation. It’s universal and will fit a wide variety of trunk applications. The larger capacity means more time between fill ups. Offered in black for a stealth appearance and in clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Compatible with BMS DDP5800 pumps, ES4714512 or ES4714513 Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Pump mounts directly to the tank Compatible with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Available in black for a stealth appearance Includes 2-way vented black plastic cap 4 mounting holes in the feet of the tank Includes a compression pump feed fitting, 2 90 degree push fittings, 9" of methanol line and pump mounting hardware. Made in the USA Tank dimensions: L 15.5" x W 8" x H 8.25"
Show More Show Less

Prosport Performance - Corporate Logo
T#:389633
Part#: 216EVOWT.F
Ships in 2 Business Days
$ 78.99 USD
Free Shipping
$ 78.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • Digital Water Temperature Guage (80-280 degrees) 
  • Instructions
  • Mounting hardware
  • Decals
  • Temperature sender - 1" long with 1/8" NPT threads
  • Dual color display (Blue or red)
Show More Show Less

Prosport Performance - Corporate Logo
T#:389630
Part#: 216EVOAFRWB4.9
Ships in 2 Business Days
$ 241.99 USD
Free Shipping
$ 241.99 USD
Free Shipping

The EVO series from ProSport Gauges utilizes the latest Bosch wideband 02 sensor -5 wire heated LSU 4.9. This gauge offers a 10.0:1 to 20.0:1 AFR readings; the widest range on the market! Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • AFR digital Gauge
  • Bosch 4.9  5 wire heated O2 sensor
  • Weld in Bung
  • Instructions
  • Wiring harness(Gauge to O2 sensor) 10 feet long
  • Plug and play wiring harness
  • Decals
  • 0-5 volt output signal for data logging
Show More Show Less
Burger Motorsports - Corporate Logo
T#:558163
Part#: BMS-WMI
Ships on Aug 7, 2026
Starting at $ 226.99 USD
Free Shipping on orders $49 and up
Starting at $ 226.99 USD
Free Shipping on orders $49 and up
Looking to make loads of power on pump gas? Enter: water/methanol injection. Regardless if you're tuned for conventional pump gas, E85, or race fuel, use of a properly configured and integrated water/meth system will reduce temperatures, allowing you to make more power than on just conventional fuel alone. Select your engine-specific nozzles (which are standard 1/8" NPT and install in most aftermarket chargepipes), your tank to mount in the trunk, upgraded steel braided lines if you so choose, and some boost juice and you just need a management solution! Optionally, add a BMS FSB for JB4 integration!
Show More Show Less
Prosport Performance - Corporate Logo
T#:389624
Part#: 216EVOWGEFP.PSI
Ships in 2 Business Days
$ 124.99 USD
Free Shipping
$ 124.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • Digital Fuel Pressure Guage (0-100 PSI) 
  • Instructions
  • Premium fuel sender
  • Mounting hardware
  • Decals
  • Green or white display
Show More Show Less


Prosport Performance - Corporate Logo
T#:389625
Part#: 216EVOWGVO
Ships in 2 Business Days
$ 71.99 USD
Free Shipping
$ 71.99 USD
Free Shipping

The EVO series from ProSport Gauges is an award winning, industry leading option for those looking to push their car's limits. They allowing you to monitor crucial engine functions in one quick glance with advanced precision. Featuring a dual color readout, you can customize your readout to your liking. Offering a user friendly readout with a digital reading in the center with a bar-graph style sweep around the gauge as well. 

Kit Includes:

  • Digital Volt Gauge (8-18v) 
  • Instructions
  • Mounting hardware
  • Decals
  • Dual color display (Green or White)
Show More Show Less
Prosport Performance - Corporate Logo
T#:31158801
Part#: 216BFWBOPSM.PSI
Ships in 3 Business Days
$ 69.99 USD
Free Shipping on orders $49 and up

52mm Prosport Electrical Oil Pressure Gauge - 0-100 PSI Blue/White is essential for accurate engine monitoring. Unlike factory gauges, which may only alert you after damage has occurred, this Prosport gauge provides real-time, precise oil pressure readings, allowing you to identify potential issues before they escalate.

  • Monitors engine oil pressure from 0 to 100 PSI.
  • Features blue and white illumination for clear visibility.
  • Includes sender, mounting hardware, visor, decals, and instructions.
  • Enhances engine monitoring and helps prevent damage.
  • Universal fitment may require modification for proper installation.
Show More Show Less