Intercooler

• Enhanced cooling efficiency: 60% larger cooling core for superior heat dissipation.
• Increased horsepower: Cooler induction air results in improved engine performance.
• Dual pass design: Two-stage water cooling for optimal efficiency and reduced intake temperatures.
• Durable construction: Cast aluminum end caps are stronger and more effective than OEM plastic.
• Even air distribution: Air dividers in the end caps ensure consistent cooling performance.

This fully TIG-welded bar & plate design intercooler from aFe is 25% larger than stock, outflowing the factory intercooler and tubes by 21% and substantially lowering intake temperatures. Intercooler and tubes bolt into place with factory-style connections.

Fits the Following BMWs:

F87 M2

Heatsoak is one of the obstacles to making big power from turbocharged engines. The stock intercooler design is commendable for single runs at the stock boost levels, but add any more boost and the system is quickly overwhelmed. As the ECU corrects for heat soak, the boost will be decreased and power reduced. Installing an upgraded intercooler is essential to keeping the engine computer from restraining boost as temperatures climb and helps to maintain boost levels even in the face of elevated turbocharger temperatures. The Evolution Racewerks Competition intercooler is much larger than stock, providing more surface area for cooling air to pass through. Even heat soak at low speeds is reduced, making this a worthwhile addition even for stock or mildly tuned engines.

Available in either Brushed, Polished or Type III Hard Anodized Black, this intercooler looks great and holds up! The hard anodized will not only give your car the stealthy look but will also protect the intercooler fins from damage. Without any reduction in thermal efficiency, hard anodizing will prevent your fins from getting deformed as easily from daily driving or road debris. It also has the added benefit of not drawing attention to the fact that the vehicle has been modified. 

Based out of Nevada, Evolution Racewerks stays at the forefront of performance BMW technology and offers top quality aftermarket parts ahead of the competition. Proven performance gains and an exhausting attention to detail is making ER one of the top names in the industry. Backed by countless successful and happy customers with the timesheets to prove it, Evolution Racewerks is a name you can count on when adding reliable horsepower.

Kit Includes:
1 High-density bar & plate type Competition intercooler
Installation Hardware

Features:

• Designed specifically to fit (and look good) on the 228i, 328i, and 428i.
• Large 20"x11"x3" (26"x11"x3" with end tanks) High Density Bar & Plate Construction Intercooler Core
• Cast end tanks for improved durability and internal flow characteristics.
• Brush finish standard
• Optional Polished finish available.
• Optional Type III Hard Black Anodizing (for stealth) finish on the intercooler, end tanks, and all piping.  Hard anodizing helps improve the durability of intercooler fins against damage from road debris (rocks).
• Features the factory style connectors.  Fully compatible with factory piping or aftermarket piping utilizing factory style connectors.  Compatible with our charge pipe upgrade kit.
• Maintains ALL factory components.  No modifications required.  100% bolt on.
• Includes all hardware needed to install.
• Developed and tested for over a year under the harsh conditions of racing.
• Limited Lifetime Warranty.

This part fits the following BMWs:
2014+ F22 2 Series Coupe M235i M235iX
2014+ F23 2 Series Convertible M235i Convertible
2012+ F30 3 Series Sedan 335i 335iX 
2012+ F31 3 Series Touring Wagon 335i 335iX
2014+ F32 4 Series Coupe 435i 435iX 
2014+ F33 4 Series Convertible, 435i 435iX
2014+ F34 Gran Turismo (GT) 335i 335iX 
2015+ F36 4 Series Gran Coupe 435i 435iX 

Heatsoak is one of the obstacles to making big power from turbocharged engines. The stock intercooler design is commendable for single runs at the stock boost levels, but add any more boost and the system is quickly overwhelmed. As the ECU corrects for heat soak, the boost will be decreased and power reduced. Installing an upgraded intercooler is essential to keeping the engine computer from restraining boost as temperatures climb and helps to maintain boost levels even in the face of elevated turbocharger temperatures. The Evolution Racewerks Competition intercooler is much larger than stock, providing more surface area for cooling air to pass through. Even heat soak at low speeds is reduced, making this a worthwhile addition even for stock or mildly tuned engines.

Available in either Brushed, Polished or Type III Hard Anodized Black, this intercooler looks great and holds up! The hard anodized will not only give your car the stealthy look but will also protect the intercooler fins from damage. Without any reduction in thermal efficiency, hard anodizing will prevent your fins from getting deformed as easily from daily driving or road debris. It also has the added benefit of not drawing attention to the fact that the vehicle has been modified. 

Based out of Nevada, Evolution Racewerks stays at the forefront of performance BMW technology and offers top quality aftermarket parts ahead of the competition. Proven performance gains and an exhausting attention to detail is making ER one of the top names in the industry. Backed by countless successful and happy customers with the timesheets to prove it, Evolution Racewerks is a name you can count on when adding reliable horsepower.

Features:

• Designed specifically to fit (and look good) on the 228i, 328i, and 428i.
• Large 20"x11"x3" (26"x11"x3" with end tanks) High Density Bar & Plate Construction Intercooler Core
• Cast end tanks for improved durability and internal flow characteristics.
• Brush finish standard
• Optional Polished finish available.
• Optional Type III Hard Black Anodizing (for stealth) finish on the intercooler, end tanks, and all piping.  Hard anodizing helps improve the durability of intercooler fins against damage from road debris (rocks).
• Features the factory style connectors.  Fully compatible with factory piping or aftermarket piping utilizing factory style connectors.  Compatible with our charge pipe upgrade kit.
• Maintains ALL factory components.  No modifications required.  100% bolt on.
• Includes all hardware needed to install.
• Developed and tested for over a year under the harsh conditions of racing.
• Limited Lifetime Warranty.

Kit Includes:
1 High-density bar & plate type Competition intercooler
Upgraded charge pipes with silicone couplers
Installation Hardware

This part fits the following BMWs:
2012+ F30 3 Series Sedan 328i 328iX 
2012+ F31 3 Series Touring Wagon 328i 328iX
2014+ F32 4 Series Coupe 428i 428iX 
2014+ F33 4 Series Convertible, 428i 428iX
2014+ F34 Gran Turismo (GT) 328i 328iX 
2015+ F36 4 Series Gran Coupe 428i 428iX 

Refresh and upgrade your front intercooler to ensure you are supplying your engine with the maximum amount of airflow. With the added charge pipe and BOV kit you can drive confidently knowing the plastic charge pipe is replaced with a much stronger metal alternative with added blow off valve for a full performance and sound upgrade!

OEM+ Upgraded Front Mount Intercooler:

Upgrade your N54/N55 performance effortlessly with this "OEM+" Intercooler from ECS Tuning! This premium intercooler is engineered to deliver superior cooling efficiency and increased horsepower without the hassle of extensive bumper/core support modifications.

Key Features:

Enhanced Core Depth: Featuring a robust aluminum bar and plate core, this intercooler ensures optimal heat dissipation for peak performance.
Durable Construction: TIG-welded cast aluminum end tanks provide unmatched durability, replacing the factory's plastic components.
Perfect Fitment: Designed to fit just like the OEM unit, it requires no additional brackets or modifications to the bumper or core support.
Compatibility: Works seamlessly with OE charge pipes and pipe connectors for easy installation.
Benefits:

Improved Cooling Efficiency: Significantly lowers intercooler outlet temperatures, ensuring your engine runs cooler and more efficiently.
Increased Durability: Aluminum end tanks offer enhanced durability and longevity compared to factory plastic construction.
Hassle-Free Installation: No need for trimming the front bumper or modifying the radiator support, making installation straightforward.
Whether you're after increased performance or an OEM purist, the ECS Tuning OEM+ Intercooler is the perfect upgrade for your BMW. Enjoy the benefits of increased horsepower and lower temperatures with an easy, hassle-free installation.

N54 Chargepipe and BOV Kit:

All of the tuning in the world is only as good as the weakest link. More boost in your 135/335 is great! But you will soon learn that some of the factory hardware is not up to the task of handling that extra pressure. One of the first things to fail and cause a boost leak are the factory boost diverter valves. This allows boost to "leak" out of the intake stream and a loss of power from the engine. This ECS Tuning chargepipe upgrade includes a blow-off valve in place of the factory diverter valves. The BOV is higher quality than the diverter valves and will exit intake air to the outside instead of putting it back through the turbo system (which will reduce strain on the turbos). This aluminum chargepipe is also much more robust than the stock plastic factory pipe and the connection to the throttle body is stronger, eliminating another failure point of the stock pipe.

Built-in 1/8" NPT ports allow you to run an additional methanol injection kit (bungs included if you don't want use the ports).

This is a complete kit that includes everything you need to replace the factory chargepipe and diverter valves -

powedercoat chargepipe
ECS Tuning blow-off valve
multiple BOV springs to suit your vacuum/boost needs
vacuum plugs for the stock diverter valve hoses
silicone hose connection to intercooler piping
all hardware and hose clamps with instructions