Camshafts

Schrick Camshaft Set - E39 M5, Z8. 268 degree, 11.3mm lift intake and...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1018

Part#: 0409A1681-L0SET

Ships on Oct 28, 2026

$ 6,911.12 USD

Add to Wish List

Qty

$ 6,911.12 USD

Add to Wish List

High-performance cams for the S62 V8 in the E39 M5 and Z8 Roadster. These cams are designed to boost output at higher RPM while keeping low-RPM torque losses to a minimum. This is a set of 4 cams.

BMW Schrick Technical Specs

Schrick Technical Information / Specs

Show More Show Less

Schrick Camshaft Set - E90/E92 M3 - 284 Degree

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2474

Part#: TMS2474

Ships on Oct 28, 2026

$ 6,478.60 USD

Add to Wish List

Qty

$ 6,478.60 USD

Add to Wish List

This is one full set of Schrick cam shafts, 4 cams total, for the S65 V8 M3 engine. These cams are the 284 degree version, and includes two intake cams and two exhaust cams. Professional installation is a must due to the complexity of the dual VAN0S V8 motor.

Show More Show Less

Schrick Camshaft Set - E90/E92 M3 - 292 Degree

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2500

Part#: TMS2500

Ships on Oct 28, 2026

$ 6,478.60 USD

Add to Wish List

Qty

$ 6,478.60 USD

Add to Wish List

This is one full set of Schrick cam shafts, 4 cams total, for the S65 V8 M3 engine. These cams are the 292 degree version, and includes two intake cams and two exhaust cams. Professional installation is a must due to the complexity of the dual VAN0S V8 motor.

Show More Show Less

Schrick Exhaust Camshaft - E46 M3, MZ3, MZ4 (S54) - 296 Degree, 14.0m...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:338219

Part#: TMS201492

Ships on Oct 28, 2026

$ 7,065.99

This product was last offered at the strikethrough price on
07-08-2026

Starting at $ 5,877.86 USD

Add to Wish List

Starting at $ 5,877.86 USD

Add to Wish List

E46 M3 Schrick 296 Degree Exhaust Camshaft with 14.0mm valve lift. This is only for use in professionally-built E46 M3 race engines. Schrick has developed this ultra-aggressive S54 race cam with 296-deg duration and 14mm of valve lift. Because of the aggressive profile and specs of this cam, Schrick only recommends it be used with no VAN0S or with special custom pistons with deep valve reliefs. We strongly recommend this be professionally installed by an experienced engine builder to check clearances and fitment.

Schrick also requires valvetrain hardware to go along with this cam:
Schrick valve springs
Schrick rocker arms
Schrick upper and lower retainers

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster, Z3 M Coupe
2006-2008 E85 BMW Z4 M Roadster, Z4 M Coupe

Show More Show Less

BMW S85 10 Cyl. 292/280-Degree - Camshaft Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:1182

Part#: TMS1182

Ships on Oct 28, 2026

$ 5,700.32 USD

Add to Wish List

Qty

$ 5,700.32 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the S85 V10 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 292 Duration Intake @ 1mm - 242 Duration Exhaust - 280 Duration Exhaust @ 1mm - 230 Intake Peak Timing - 145 Exhaust Peak Timing - 130-93 Cam Lobe Lift Intake - 12, 2 Cam Lobe Lift Exhaust - 12, 2 Valve Lift w/o Valve Clearance Intake - 12, 2 Valve Lift w/o Valve Clearance Exhaust - 12, 2 Valve Clearance Intake - Hydraulic Valve Clearance Exhaust - Hydraulic

Show More Show Less

Schrick Camshaft Set With DLC Rocker Arms - 288/280 Degree 12.5mm Lif...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Earn 5% back in Turner Rewards on orders placed 10/28-10/31. Redeem 11/27-12/1. Terms & conditions apply

T#:46959286

Part#: 054995LA-288KT2

Ships on Oct 28, 2026

Sale - Save 24% $ 6,999.99

This product was last offered at the strikethrough price on
05-03-2026

$ 5,354.99 USD

Add to Wish List

Qty

Sale - Save 24%

$ 6,999.99

This product was last offered at the strikethrough price on
05-03-2026

$ 5,354.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing.

These cams are a direct replacement for the stock cams and give a solid 15+ horsepower boost at the top end and great midrange torque increases too! More gains can be expected with intake and header upgrades and custom software tuning. A slightly lumpy idle is expected at cold start, but will be smooth once at operating temperature.

These Schrick cams were initially developed for the M3 CSL, but they also work well on the US and other non-CSL S54 engines. With more duration, they are a great match to high-flow headers and CSL intake plenum upgrades.

KIT INCLUDES

Schrick 280-Degree Exhaust Camshaft Schrick 288-Degree Intake Camshaft 24 Turner Motorsport DLC-Coated Performance Rocker Arms NOTE: Camshaft replacement requires multiple special tools. We offer the Genuine BMW Camshaft Press (T#171829) and a Schwaben Camshaft Alignment Tool Set (T#395239) to aid in installation.

Show More Show Less

Schrick Camshaft Set - E46 M3, MZ3, MZ4 (S54) - 304/296 14mm Lift ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:340425

Part#: TMS200183

Ships on Oct 28, 2026

Starting at $ 4,865.48 USD

Add to Wish List

Starting at $ 4,865.48 USD

Add to Wish List

E46 M3 Schrick high-performance racing camshaft set - 304 degree intake and 296 degree exhaust. These camshafts are for use in professionally-built E46 M3 race engines. Schrick has developed these ultra-aggressive S54 race cams with 14mm of valve lift. Because of the aggressive profile and specs of this cam, Schrick only recommends them be used with no VAN0S and with special custom pistons with deep valve reliefs. We strongly recommend these be professionally installed by an experienced engine builder to check clearances and fitment.

Schrick also requires valvetrain hardware to go along with these cams:
Schrick valve springs
New Schrick or BMW rocker arms
Schrick upper (titanium) and lower (steel) retainers

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster, Z3 M Coupe
2006-2008 E85 BMW Z4 M Roadster, Z4 M Coupe

Show More Show Less

Schrick Intake Camshaft - E46 M3, MZ3, MZ4 (S54) - 288 Degree, 12.5mm...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:338222

Part#: TMS3572

In Stock

Sale - Save 28% $ 5,600.99

This product was last offered at the strikethrough price on
07-08-2026

Starting at $ 4,048.04 USD

Add to Wish List

Sale - Save 28%

$ 5,600.99

This product was last offered at the strikethrough price on
07-08-2026

Starting at $ 4,048.04 USD

Add to Wish List

E46 M3 Schrick 288 Degree Intake Camshaft with 12.5mm valve lift. Originally desinged for the M3 CSL but works great in a standard M3. A new rocker arm is required (Schrick or new BMW part #11337833259). This is a more agressive cam that the Schrick 280 degree cam that we also offer for the E46M3

BMW Schrick Technical Specs

Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe

Show More Show Less

Schrick Camshaft Set With DLC Rocker Arms - 280/272 Degree 12.5mm Lif...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:50731686

Part#: 054995LA-272KT2

Ships on Oct 28, 2026

Sale - Save 8% $ 4,392.99

This product was last offered at the strikethrough price on
05-03-2026

$ 4,032.89 USD

Add to Wish List

Qty

Sale - Save 8%

$ 4,392.99

This product was last offered at the strikethrough price on
05-03-2026

$ 4,032.89 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track, using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing.

These are a direct replacement for the stock camshafts and offer increased flow at mid and higher RPMs, thanks to 12.5mm of valve lift. Unlike 288/280 camshafts, this 280/272 set does not require upgraded valvetrain parts. The profile of these camshafts is quite close to stock CSL specs.

KIT INCLUDES

Schrick 272-Degree Exhaust Camshaft Schrick 280-Degree Intake Camshaft 24 Turner Motorsport DLC-Coated Performance Rocker Arms NOTE: Camshaft replacement requires multiple special tools. We offer the Genuine BMW Camshaft Press (T#171829) and a Schwaben Camshaft Alignment Tool Set (T#395239) to aid in installation.

Show More Show Less

BMW S38 6 Cyl. 280-Degree - Camshaft

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:136

Part#: TMS136

Ships on Oct 28, 2026

$ 3,999.99 USD

Add to Wish List

Qty

$ 3,999.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the S38 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 280 Duration Intake @ 1mm - Duration Exhaust - 280 Duration Exhaust @ 1mm - Intake Peak Timing - 110 Exhaust Peak Timing - 110 Cam Lobe Lift Intake - 11 Cam Lobe Lift Exhaust - 11 Valve Lift w/o Valve Clearance Intake - 11 Valve Lift w/o Valve Clearance Exhaust - 11 Valve Clearance Intake - 0, 35 Valve Clearance Exhaust - 0,35

Show More Show Less

E36 M3 EURO 3.2 (double-VANOS) Schrick Performance Camshaft Set ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:340447

Part#: TMS4072

Ships on Oct 28, 2026

Starting at $ 3,578.99 USD

Add to Wish List

Starting at $ 3,578.99 USD

Add to Wish List

for E36 M3 EURO 3.2 (S52B32, double-VAN0S); Intake and Exhaust cam set, 284-degree/11.9mm lift. For the Euro 3.2 M3 engine only (not US). Also available in a more agressive set with a 292 degree intake cam w/12.4 mm lift.

BMW Schrick Technical Specs

Schrick Technical Information / Specs

Show More Show Less

Schrick Camshaft Set - E46 M3, MZ3, MZ4 (S54) - 288/280 12.5mm Lift ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:340423

Part#: TMS201497

Ships on Oct 28, 2026

Starting at $ 3,551.99 USD

Add to Wish List

Starting at $ 3,551.99 USD

Add to Wish List

Still looking for more power after bolt-ons? High performance camshafts from Schrick are the way to go. These cams are a direct replacement for the stock cams and give a solid 15+ horsepower boost at the top end and great midrange torque increases too! More gains can be expected with intake and header upgrades and custom software tuning. A slightly lumpy idle is expected at cold start but will be smooth once at operating temperature. This set is just a great all-around cam upgrade for the S54!

These Schrick cams were initially developed for the M3 CSL but they also work great on the US and other non-CSL S54 engines as well. With more duration they are a great match to high flow headers, no cats, or CSL intake manifold upgrades. These are the new "cast" cams from Schrick which require new rocker arms (Schrick recommended or BMW part #11337833259). Professional installation is a must due to the intricacies with the double VAN0S.

BMW Schrick Technical Specs

Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe

Show More Show Less

Schrick Camshaft Set - E46 M3, MZ3, MZ4 (S54) - 288/280 12.5mm Lift ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:201497

Part#: TMS201497

Ships on Oct 28, 2026

$ 3,551.99 USD

Add to Wish List

Qty

$ 3,551.99 USD

Add to Wish List

Still looking for more power after bolt-ons? High performance camshafts from Schrick are the way to go. These cams are a direct replacement for the stock cams and give a solid 15+ horsepower boost at the top end and great midrange torque increases too! More gains can be expected with intake and header upgrades and custom software tuning. A slightly lumpy idle is expected at cold start but will be smooth once at operating temperature. This set is just a great all-around cam upgrade for the S54!

These Schrick cams were initially developed for the M3 CSL but they also work great on the US and other non-CSL S54 engines as well. With more duration they are a great match to high flow headers, no cats, or CSL intake manifold upgrades. These are the new "cast" cams from Schrick which require new rocker arms (Schrick recommended or BMW part #11337833259). Professional installation is a must due to the intricacies with the double VAN0S.

Schrick Technical Information / Specs

This item fits the following BMWs:

2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe

Show More Show Less

Schrick Camshaft Set - E36 M3-spec - 252/244 Degree

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:21521

Part#: TMS21521

Ships on Oct 28, 2026

$ 3,470.66 USD

Add to Wish List

Qty

$ 3,470.66 USD

Add to Wish List

These Schrick camshafts are the same specs as the stock US S50 cams -
Intake: 252 degree, 10.2mm lift
Exhaust: 244 degree, 9.5mm lift

With original S50/S52 cams in short supply, and a new set running over $2,000 from BMW, you can source new M3-spec cams from Schrick. These are the same specs as the US S50 engine and very close to the stock S52 cams. These make a great upgrade for M50 (325i, 525i) and M52 engines (328i, 528i) with the proper tuning. These bolt in just like the stock and M3 cams with no special hardware upgrades required - use your stock valve springs, lifters, etc. But for reliability we recommend replacing the lifters, valve springs, and retainers with new stock parts on high mileage engines.

Full cam specs: Schrick Technical Information / Specs

This item fits the following BMWs:
1993-1999 E36 BMW 325i 325is 325ic 328i 328is 328ic M3
1993-1995 E34 BMW 525i
1997-1998 E39 BMW 528i
1997-1998 Z3 BMW Z3 2.8
1998-1999 Z3 BMW M Roadster M Coupe

Show More Show Less

Schrick Exhaust Camshaft - E46 M3, MZ3, MZ4 (S54) - 280 Degree, 14.0m...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:338217

Part#: TMS201495

Ships in 2 Business Days

Sale - Save 10% $ 3,804.99

This product was last offered at the strikethrough price on
07-08-2026

Starting at $ 3,424.49 USD

Add to Wish List

Sale - Save 10%

$ 3,804.99

This product was last offered at the strikethrough price on
07-08-2026

Starting at $ 3,424.49 USD

Add to Wish List

E46 M3 Schrick 280 Degree Exhaust Camshaft with 14.0mm valve lift. This is only for use in professionally-built E46 M3 race engines. Schrick has developed this ultra-aggressive S54 race cam with 280-deg duration and 14mm of valve lift. Because of the aggressive profile and specs of this cam, Schrick only recommends it be used with special custom pistons with deep valve reliefs. We strongly recommend this be professionally installed by an experienced engine builder to check clearances and fitment.

Schrick also requires valvetrain hardware to go along with this cam:
Schrick valve springs
Schrick rocker arms
Schrick upper and lower retainers

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster, Z3 M Coupe
2006-2008 E85 BMW Z4 M Roadster, Z4 M Coupe

Show More Show Less

Schrick Camshaft Set - E46 330, 530, X5 3.0, Z3 3.0 - 272/256 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:200185

Part#: TMS200185

Ships on Oct 28, 2026

$ 3,340.69 USD

Add to Wish List

Qty

$ 3,340.69 USD

Add to Wish List

Schrick 272 degree (10.9mm lift) intake and 256 degree (10.4mm lift) exhaust cams provide a power boost at mid-high RPM range without software changes. We also recommend purchasing Supertech High Performance Valve Springs Call us for details. Professional installation required for all Shrick Camshafts.

BMW Schrick Technical Specs

Schrick Technical Information / Specs

Show More Show Less

Schrick Camshaft Set - E46 M3, MZ3, MZ4 (S54) - 288/280 14mm Lift ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:340424

Part#: TMS200186

Ships on Oct 28, 2026

Starting at $ 3,261.73 USD

Add to Wish List

Starting at $ 3,261.73 USD

Add to Wish List

E46 M3 Schrick high-performance racing camshaft set - 288 degree intake and 280 degree exhaust. These camshafts are for use in professionally-built E46 M3 race engines. Schrick has developed these ultra-aggressive S54 race cams with 14mm of valve lift. Because of the aggressive profile and specs of this cam, Schrick only recommends them be used with special custom pistons with deep valve reliefs. We strongly recommend these be professionally installed by an experienced engine builder to check clearances and fitment.

Schrick also requires valvetrain hardware to go along with these cams:
Schrick valve springs
Schrick rocker arms
Schrick upper (titanium) and lower (steel) retainers

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster, Z3 M Coupe
2006-2008 E85 BMW Z4 M Roadster, Z4 M Coupe

Show More Show Less

Schrick Camshaft Set - S54 288/280 14mm Lift

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:200186

Part#: TMS200186

Ships on Oct 28, 2026

$ 3,261.73 USD

Add to Wish List

Qty

$ 3,261.73 USD

Add to Wish List

NOW LOCATED UNDER T#340424

Schrick Camshaft Set - E36 M3 Euro S50 3.0 284 Deg.

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:6106374

Part#: 284.A1.840-001KT

Ships on Oct 28, 2026

$ 3,110.00 USD

Add to Wish List

Qty

$ 3,110.00 USD

Add to Wish List

The Euro 3.0 M3 (284HP engine) Schrick Camshaft Set consists of a 284 degree inake and a 284 degree exhaust cam. For the Euro 3.0 engine only (not US).

BMW Schrick Technical Specs

Schrick Technical Information / Specs

Show More Show Less

N54 Schrick Camshaft Set 268/265

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:25739348

Part#: N54CAMSKT

Ships on Oct 28, 2026

Sale - Save 10% $ 3,415.99

This product was last offered at the strikethrough price on
07-07-2026

$ 3,074.39 USD

Add to Wish List

Qty

Sale - Save 10%

$ 3,415.99

This product was last offered at the strikethrough price on
07-07-2026

$ 3,074.39 USD

Add to Wish List

Take your N54-powered BMW to the next level with this upgraded camshaft kit from Schrick Cams! Increasing the air allowed in and out of the motor by increasing both lift and duration over stock is one of the most effective ways to add power to your car next to adding more boost. We recommend finding a competent tuner to get the most out of your individual setup. Duration Duration Intake: 268 Duration Intake @ 1mm: 219 Duration Exhaust: 264 Duration Exhaust @ 1mm: 214 Intake Peak Timing: 125,6 Exhaust Peak Timing: -128 Lift Cam Lobe Lift Intake: 7,2 Cam Lobe Lift Exhaust: 6,54 Valve Lift Without Valve Clearance Intake: 12 Valve Lift Without Valve Clearance Exhaust: 11 Valve Clearance Intake: hydr. Valve Clearance Exhaust:

Show More Show Less

Schrick Camshaft Set - E30 M3 284/276 degree

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3566

Part#: E30M3SCHRICK

Ships on Oct 28, 2026

$ 3,007.27 USD

Add to Wish List

Qty

$ 3,007.27 USD

Add to Wish List

Boost your mid to top end power on your S14 engine with these aggressive Schrick cams! These are the next step above the Evo 2/3 cams that we also sell and will produce greater top-end power with only slight loss in torque. The intake cam is 284 degree (stock is 246) with 11.5mm lift (stock is 10.7) and the exhaust cam is a 276 degree with 11.3mm lift. Motorsport valve springs and adjustable cam sprockets are recommended but not required

BMW Schrick Technical Specs

Schrick Technical Information / Specs

This item fits the following BMWs:
1988-1991 E30 BMW M3 - S14 engine

Show More Show Less

Schrick Camshaft Set - E46 323/328 M52TU - 248/248

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:773

Part#: E46M52TUSCHRICK

Ships on Oct 28, 2026

$ 2,915.38 USD

Add to Wish List

Qty

$ 2,915.38 USD

Add to Wish List

M52TU Schrick Camshaft Set. 248 degree 10mm lift intake, 248 degree exhaust. Great for street use. Power gains across the board with calm idle. No need for upgraded valve train. Works perfect for 323 / 328!

BMW Schrick Technical Specs

Schrick Technical Information / Specs

This item fits the following BMWs:
1999-2000 E46 BMW 323i 323ci 328i 328ci
1999-2000 E39 BMW 528i
1999-2000 Z3 BMW Z3 2.3 Z3 2.8

Show More Show Less

Schrick Camshaft Set - E46 325, 330, 530, X5 3.0, Z3 3.0 - 264/248 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4048

Part#: E46-M54-SCHRICK

Ships on Oct 28, 2026

$ 2,915.38 USD

Add to Wish List

Qty

$ 2,915.38 USD

Add to Wish List

Schrick 264 degree (10.5mm lift) intake and 248 degree (10mm lift) exhaust cams provide a power boost at mid-high RPM range without software changes. As used in our 330i ZHP Project Car! These are also available for track / race applications in 272 intake and 256 exhaust durations. We also recommend purchasing Supertech High Performance Valve Springs Call us for details. Professional installation required for all Shrick Camshafts.

BMW Schrick Technical Specs

Schrick Technical Information / Specs

Show More Show Less

Schrick Camshaft Set - MINI Cooper S - R56 - Schrick 248 Degree Camsh...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2480

Part#: TMS2480

Ships on Oct 28, 2026

$ 2,827.73 USD

Add to Wish List

Qty

$ 2,827.73 USD

Add to Wish List

This MINI Cooper S turbo R56 Schrick 248 Degree Intake & Exhaust Camshaft Set with 10mm lift provides a power boost at mid-high RPM range while idle smoothness is retained.

This item fits the following MINIs:
2006+ MINI R56 MINI Cooper S
2008+ MINI R55 MINI Cooper S Clubman
2008+ MINI R57 MINI Cooper S Convertible

BMW Schrick Technical Specs

Schrick Technical Information / Specs

Show More Show Less

Schrick Camshaft Set - E36 M3, MZ3, M52 inc 2.8 1995-99 - 256/264 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3859

Part#: TMS3859

Ships on Oct 28, 2026

$ 2,799.99 USD

Add to Wish List

Qty

$ 2,799.99 USD

Add to Wish List

For the US E36 M3. Schrick 264/256 degree camshafts boost mid-high end power for that extra motivation at higher rpm. Low-end torque is not seriously affected due to the M50/M52s VAN0S System. And, higher profile cams work extremely well with an upgraded intake and exhaust. When upgrading the cams there are other areas you must take into consideration. Higher-flow fuel injectors, larger mass-air sensor, and custom programming are strongly recommended. Turner Motorsport sells complete intake & cam packages that boost power to over 290hp. See the Engine section under Camshafts for more info.

Cam Specs:
Intake - 264 degree, 11.2mm lift
Exhaust - 256 degree, 10.6mm lift

Schrick Technical Information / Specs

This item fits the following BMWs:
1993-1998 E36 BMW 325i 325is 325ic 328i 328is 328ic M3
1993-1995 E34 BMW 525i
1997-1998 Z3 BMW Z3 2.8
1998-1999 Z3 BMW M Roadster M Coupe

Show More Show Less

Schrick Camshaft Set - E46 M3, MZ3, MZ4 (S54) - 280/272 12.5mm Lift ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:338745

Part#: E46M3SCHRICK

Ships on Oct 28, 2026

Starting at $ 2,692.99 USD

Add to Wish List

Starting at $ 2,692.99 USD

Add to Wish List

Still looking for more power after bolt-ons? High performance camshafts from Schrick are the way to go. These proved to be an excellent upgrade on our first Project E46 M3 and very similar to the stock E46 M3 CSL cams. Smooth as stock idle with a linear increase in horsepower from midrange all the way to redline. Peak gain was 15hp with no loss in low end torque. The duration of the intake cam is 280 and the exhaust is 272 with 12.5mm valve lift. These are the new "cast" cams from Schrick which require new rocker arms (Schrick or BMW part #11337833859). Professional installation is a must due to the intricacies with the double VAN0S.

BMW Schrick Technical Specs

Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe

Show More Show Less

BMW S54 3.2L Schrick Camshaft Set 280/272 12.5mm Lift

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:3855

Part#: E46M3SCHRICK

Ships on Oct 28, 2026

$ 2,692.99 USD

Add to Wish List

Qty

$ 2,692.99 USD

Add to Wish List

SEE T#338745 BMW S54 3.2L Schrick Camshaft Set 280/272 12.5mm Lift is the perfect performance upgrade for enthusiasts seeking to enhance their engine's capabilities. With over 40 years of experience, Schrick is dedicated to producing high-quality camshafts that deliver exceptional power and reliability. Designed for both street and track applications, these camshafts offer an impressive balance of performance and drivability. The intake cam features a duration of 280, while the exhaust cam has a duration of 272, with a valve lift of 12.5mm. These new "cast" cams from Schrick closely resemble the stock E46 M3 CSL cams, ensuring a smooth idle and a significant increase in horsepower throughout the RPM range. With a peak gain of 15 horsepower and no loss in low-end torque, these camshafts are a top choice for BMW enthusiasts.

Key Benefits:

Enhanced Power: Delivers a peak gain of 15 horsepower.
Smooth Idle: Maintains a factory-like idle quality for everyday driving.
Linear Power Increase: Provides a steady increase in horsepower from midrange to redline.
Compatibility: Designed to fit the BMW S54 engine with new rocker arms required.
High-Quality Construction: Crafted from top materials for strength and durability.

Show More Show Less

BMW M50 M52 S50 S52 Shrick Camshaft Set 276 intake / 270 exhaust ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:4731086

Part#: SCH-CSS-S52-276/

Ships in 2 Business Days

$ 2,640.99 USD

Add to Wish List

Qty

$ 2,640.99 USD

Add to Wish List

Elevate your BMW's engine performance with Schrick's premium camshafts, crafted with over 40 years of dedication to excellence. Catering to both street and track enthusiasts, Schrick ensures top-quality materials for strength and accuracy. This renowned brand has formed a lasting bond with BMW enthusiasts, providing advanced camshaft options that have stood the test of time.

Premium Schrick camshafts for BMW
Over 40 years of dedicated engine performance expertise
Ideal for both street and track applications
Top-quality materials for strength and accuracy
Trusted by BMW enthusiasts worldwide
Advanced engine testing and manufacturing technology

Show More Show Less

Schrick Intake Camshaft - E46 M3, MZ3, MZ4 (S54) - 304 Degree, 14.0mm...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:338221

Part#: TMS201493

Ships on Oct 28, 2026

Starting at $ 2,432.99 USD

Add to Wish List

Starting at $ 2,432.99 USD

Add to Wish List

E46 M3 Schrick 304 Degree Intake Camshaft with 14.0mm valve lift. This is only for use in professionally-built E46 M3 race engines. Schrick has developed this ultra-aggressive S54 race cam with 304-deg duration and 14mm of valve lift. Because of the aggressive profile and specs of this cam, Schrick only recommends it be used with no VAN0S or with special custom pistons with deep valve reliefs. We strongly recommend this be professionally installed by an experienced engine builder to check clearances and fitment.

Schrick also requires valvetrain hardware to go along with this cam:
Schrick valve springs
Schrick rocker arms
Schrick upper and lower retainers

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster, Z3 M Coupe
2006-2008 E85 BMW Z4 M Roadster, Z4 M Coupe

Show More Show Less

Kelford Camshaft Set - Gen 2 B58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:25938642

Part#: KEL-B58-GEN2

Ships in 3 Business Days

Starting at $ 2,394.98 USD

Add to Wish List

Starting at $ 2,394.98 USD

Add to Wish List

BMW B58 Gen2 - Stage 1 Street | Strip | Circuit Race | Road Race | Roll Race | Drift | E85 270° / 268° - 10.30mm / 10.15mm Valve Lift 270°/268° cams to suit BMW's Gen 2 B58 engine with bolt-on intake, exhaust, and turbo upgrades. For an engine producing around 550-750hp running a 58-68mm turbo. Still maintains full use of Valvetronic and Double VANOS for good throttle response and wide power band. Must have valve spring upgrade. BMW B58 Gen2 - Stage 2 Strip | Drag Race | Circuit Race | Road Race | Roll Race | Drift | E85 285° / 280° - 10.30mm / 10.60mm Valve Lift 285°/280° stage 2 racing cams for professionally built BMW Gen 2 B58 engine making 750hp-1000hp. Turbo sizing 62-72mm. Great with aftermarket intake plenums. Still can maintain full use of Valvetronic and Dual VANOS. Can run Valvetronic locked in the fully open position when using an aftermarket throttle body. Must have valve spring upgrade. BMW B58 Gen2 - Stage 3 Strip | Drag Race | Roll Race | Drift | E85 | Methanol 288° / 288° - 10.35mm / 10.80mm Valve Lift 288° Stage 3 drag racing cams for professionally built B58 Gen 2 engines making 1200hp+. Turbo sizing 72mm+ on high boost. Fuel-type ethanol blend or methanol. Must use aftermarket high-flow plenum with a throttle body conversion. Recommend locking the Valvetronic system at 100% swing. Must have valve spring upgrade. High Performance Valve Spring Kit - B58 Kelford's performance valve spring and titanium retainer kit is designed to work with the B58B30 straight-6 engine. Made using high-performance PACALOY™, this kit is sure to offer outstanding performance. This kit is specifically engineered to work well with their Stage 1, Stage 2, and Stage 3 camshafts to provide exceptional quality, reliability, and performance. 90lb seat pressure at 36.5 mm installed height; 193lb at 11.0 mm valve lift Spring coil bind height at 23.6 mm

Show More Show Less

Kelford Camshaft Set - Gen 1.5 B58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:25938633

Part#: KEL-B58-GEN1.5

Ships in 3 Business Days

Starting at $ 2,394.98 USD

Add to Wish List

Starting at $ 2,394.98 USD

Add to Wish List

BMW B58 Gen1.5 - Stage 1 Street | Strip | Circuit Race | Road Race | Roll Race | Drift | E85 270° / 268° - 10.30mm / 10.15mm Valve Lift 270°/268° cams to suit BMW's Gen 1.5 B58 engine with bolt-on intake, exhaust, and turbo upgrades. For an engine producing around 550-750hp running a 58-68mm turbo. Still maintains full use of Valvetronic and Double VANOS for good throttle response and wide power band. Must have valve spring upgrade. BMW B58 Gen1.5 - Stage 2 Strip | Drag Race | Circuit Race | Road Race | Roll Race | Drift | E85 285° / 280° - 10.30mm / 10.60mm Valve Lift 285°/280° stage 2 racing cams for professionally built BMW Gen 1.5 B58 engine making 750hp-1000hp. Turbo sizing 62-72mm. Great with aftermarket intake plenums. Still can maintain full use of Valvetronic and Dual VANOS. Can run Valvetronic locked in the fully open position when using an aftermarket throttle body. Must have valve spring upgrade. BMW B58 Gen1.5 - Stage 3 Strip | Drag Race | Roll Race | Drift | E85 | Methanol 288° / 288° - 10.35mm / 10.80mm Valve Lift 288° Stage 3 drag racing cams for professionally built B58 Gen 1.5 engines making 1200hp+. Turbo sizing 72mm+ on high boost. Fuel-type ethanol blend or methanol. Must use aftermarket high-flow plenum with a throttle body conversion. Recommend locking the Valvetronic system at 100% swing. Must have valve spring upgrade. High Performance Valve Spring Kit - B58 Kelford's performance valve spring and titanium retainer kit is designed to work with the B58B30 straight-6 engine. Made using high-performance PACALOY™, this kit is sure to offer outstanding performance. This kit is specifically engineered to work well with their Stage 1, Stage 2, and Stage 3 camshafts to provide exceptional quality, reliability, and performance. 90lb seat pressure at 36.5 mm installed height; 193lb at 11.0 mm valve lift Spring coil bind height at 23.6 mm

Show More Show Less

Kelford Camshaft Set - Gen 1 B58

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:25938620

Part#: KEL-CSS-B58-GEN1

Ships in 3 Business Days

Starting at $ 2,394.98 USD

Add to Wish List

Starting at $ 2,394.98 USD

Add to Wish List

BMW B58 Gen1 - Stage 1 Street | Strip | Circuit Race | Road Race | Roll Race | Drift | E85 270° / 268° - 10.30mm / 10.15mm Valve Lift 270°/268° cams to suit BMW's Gen 1 B58 engine with bolt-on intake, exhaust, and turbo upgrades. For an engine producing around 550-750hp running a 58-68mm turbo. Still maintains full use of Valvetronic and Double VANOS for good throttle response and wide power band. Must have valve spring upgrade. BMW B58 Gen1 - Stage 2 Strip | Drag Race | Circuit Race | Road Race | Roll Race | Drift | E85 285° / 280° - 10.30mm / 10.60mm Valve Lift 285°/280° stage 2 racing cams for professionally built BMW Gen 1 B58 engine making 750hp-1000hp. Turbo sizing 62-72mm. Great with aftermarket intake plenums. Still can maintain full use of Valvetronic and Dual VANOS. Can run Valvetronic locked in the fully open position when using an aftermarket throttle body. Must have valve spring upgrade. BMW B58 Gen1 - Stage 3 Strip | Drag Race | Roll Race | Drift | E85 | Methanol 288° / 288° - 10.35mm / 10.80mm Valve Lift 288° Stage 3 drag racing cams for professionally built B58 Gen 1 engines making 1200hp+. Turbo sizing 72mm+ on high boost. Fuel-type ethanol blend or methanol. Must use aftermarket high-flow plenum with a throttle body conversion. Recommend locking the Valvetronic system at 100% swing. Must have valve spring upgrade. High Performance Valve Spring Kit - B58 Kelford's performance valve spring and titanium retainer kit is designed to work with the B58B30 straight-6 engine. Made using high-performance PACALOY™, this kit is sure to offer outstanding performance. This kit is specifically engineered to work well with their Stage 1, Stage 2, and Stage 3 camshafts to provide exceptional quality, reliability, and performance. 90lb seat pressure at 36.5 mm installed height; 193lb at 11.0 mm valve lift Spring coil bind height at 23.6 mm

Show More Show Less

Cat Cams Performance Camshaft set 272/258 11.00mm/10.00mm - M60 V8 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:578584

Part#: 1303507

Special Order: No Guaranteed ETA

$ 2,233.99 USD

Add to Wish List

Qty

$ 2,233.99 USD

Add to Wish List

Made in Belgium, Cat Cams offer great performance at a reasonable price. Cat Cam offers cams in most popular enthusiast upgrade specs to ensure there is a option for what ever your power goal is.

Cat Cams Performance camshaft set - 283/272 11.55mm/11.00mm - M60 V8 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:578585

Part#: 1303508

Special Order: No Guaranteed ETA

$ 2,233.99 USD

Add to Wish List

Qty

$ 2,233.99 USD

Add to Wish List

Made in Belgium, Cat Cams offer great performance at a reasonable price. Cat Cam offers cams in most popular enthusiast upgrade specs to ensure there is a option for what ever your power goal is.

Cat Cams Sport camshaft set 258/247 10.00mm/9.40mm - M60 V8 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:578583

Part#: 1303506

Ships on Aug 21, 2026

$ 2,233.99 USD

Add to Wish List

Qty

$ 2,233.99 USD

Add to Wish List

Made in Belgium, Cat Cams offer great performance at a reasonable price. Cat Cam offers cams in most popular enthusiast upgrade specs to ensure there is a option for what ever your power goal is.

Cat Cams Sport Camshaft set - 263/257 10.30mm/9.90mm - E39 540i E38 7...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:578582

Part#: 1303702

Special Order: No Guaranteed ETA

$ 2,233.99 USD

Add to Wish List

Qty

$ 2,233.99 USD

Add to Wish List

Made in Belgium, Cat Cams offer great performance at a reasonable price. Cat Cam offers cams in most popular enthusiast upgrade specs to ensure there is a option for what ever your power goal is.

Schrick Exhaust Camshaft - E46 M3, MZ3, MZ4 (S54) - 272 Degree, 12.5m...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:338215

Part#: TMS11749

Ships on Oct 28, 2026

Sale - Save 15% $ 2,553.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 2,165.97 USD

Add to Wish List

Sale - Save 15%

$ 2,553.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 2,165.97 USD

Add to Wish List

E46 M3 Schrick 272 Degree Exhaust Camshaft with 12.5mm valve lift. New rocker arms are required (BMW part #11337833259 or a new Schrick part).

BMW Schrick Technical Specs

Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe

Show More Show Less

BMW S85 10 Cyl. 296/284-Degree - Camshaft Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:589847

Part#: S85-296-284KT

Ships on Oct 28, 2026

$ 2,113.99 USD

Add to Wish List

Qty

$ 2,113.99 USD

Add to Wish List

This is one full set of Schrick camshafts, 4 cams total, for the S85 V10 M5 engine. These cams are the 296/284 degree version and include two intake cams and two exhaust cams. Professional installation is a must due to the complexity of the dual VAN0S V10 motor.

Show More Show Less

Schrick Camshaft Set - MINI Cooper S - R56 - Schrick 248 Degree Camsh...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2114

Part#: TMS2114

Ships on Oct 28, 2026

$ 2,069.99 USD

Add to Wish List

Qty

$ 2,069.99 USD

Add to Wish List

This MINI Cooper S turbo R56 Schrick 248 Degree Intake & Exhaust Camshaft Set with 10.7mm lift provides a power boost at mid-high RPM range while idle smoothness is retained. This kit includes titanium valve retainers.

This item fits the following MINIs:
2006+ MINI R56 MINI Cooper S
2008+ MINI R55 MINI Cooper S Clubman
2008+ MINI R57 MINI Cooper S Convertible

BMW Schrick Technical Specs

Schrick Technical Information / Specs

Show More Show Less

Cat Cams N54 Hot Street Camshaft Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:25805752

Part#: 1305002

Special Order: No Guaranteed ETA

$ 1,950.00 USD

Add to Wish List

Qty

$ 1,950.00 USD

Add to Wish List

Upgrade your N54 Engine with Cat Cams, a leader in the performance-aftermarket camshaft industry. These Camshafts will increase airflow into the engine by increasing the overall lift and duration over the factory cams. With their Hot Street cam setup, you can run all factory valvetrain, with no valve spring upgrades necessary! Check the distance between valves and piston to be 1mm at least with VVT engaged. Wrong installation will cause severe engine damage! The VANOS (VVT) system on the intake camshaft changes the PD from 125° to 70°. The data are shown for full intake retard (disengaged VVT).The VANOS (VVT) system on the exhaust camshaft changes the PD from 130° to 85°. The data are shown for full exhaust advance (disengaged VVT). Tuning advised!

Show More Show Less

Cat Cams N54 Race Camshaft Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:25805753

Part#: 1305003

Special Order: No Guaranteed ETA

$ 1,950.00 USD

Add to Wish List

Qty

$ 1,950.00 USD

Add to Wish List

Upgrade your N54 Engine with Cat Cams, a leader in the performance-aftermarket camshaft industry. These Camshafts will increase airflow into the engine by increasing the overall lift and duration over the factory cams. With their race cam setup, you can run all factory valvetrain, with no valve spring upgrades necessary! Check the distance between valves and piston to be 1mm at least with VVT engaged. Wrong installation will cause severe engine damage! The VANOS (VVT) system on the intake camshaft changes the PD from 125° to 70°. The data are shown for full intake retard (disengaged VVT). The VANOS (VVT) system on the exhaust camshaft changes the PD from 130° to 85°. The data are shown for full exhaust advance (disengaged VVT). Tuning Required!

Show More Show Less

Schrick Performance Camshaft Set - 238/272 - F80 M3, F82/83 M4 S55 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:637691

Part#: SCHCSSS55238/272

Back Ordered

$ 1,899.99 USD

Add to Wish List

Qty

$ 1,899.99 USD

Add to Wish List

High-performance camshafts are key to increasing the top-end power output of your S55 engine at high boost. 238/272 degree, 10.6mm/10.5mm lift. Perfectly compatible with OE valves, springs, VANOS, Valvetronic etc

Show More Show Less

Schrick Exhaust Camshaft - E46 M3, MZ3, MZ4 (S54) - 280 Degree, 14.0m...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:23847549

Part#: 0415A180001

Special Order: No Guaranteed ETA

$ 1,876.99 USD

Add to Wish List

Qty

$ 1,876.99 USD

Add to Wish List

Schrick Intake Camshaft - E46 M3, MZ3, MZ4 (S54) - 280 Degree, 12.5mm...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:11748

Part#: TMS11748

Special Order: No Guaranteed ETA

$ 1,867.99 USD

Add to Wish List

Qty

$ 1,867.99 USD

Add to Wish List

E46 M3 with S54 engine Schrick 280 Degree Intake Camshaft with 12.5mm valve lift. A new rocker arm is required (Schrick or new BMW part #11337833259).

Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe

Show More Show Less

BMW S50/S52 6 Cyl. 316-Degree - Intake Camshaft

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:554491

Part#: 0284E1160-1V2

Special Order: No Guaranteed ETA

$ 1,835.99 USD

Add to Wish List

Qty

$ 1,835.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the S50 and S52 engines. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 316 Duration Intake @ 1mm - 282 Intake Peak Timing - 104 Cam Lobe Lift Intake - 13, 3 Valve Lift w/o Valve Clearance Intake - 13, 3 Valve Clearance Intake - 0, 25

Show More Show Less

BMW S50/S52 6 Cyl. 296-Degree - Intake Camshaft

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26671614

Part#: 0284E1960-0V2

Special Order: No Guaranteed ETA

$ 1,835.99 USD

Add to Wish List

Qty

$ 1,835.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the S50 and S52 engines. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 296 Duration Intake @ 1mm - 266 Intake Peak Timing - 129 Cam Lobe Lift Intake - 12, 4 Valve Lift w/o Valve Clearance Intake - 12, 4 Valve Clearance Intake - 0, 25

Show More Show Less

BMW S50/S52 6 Cyl. 308-Degree - Exhaust Camshaft

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26671615

Part#: 0284A1080-1V2

Special Order: No Guaranteed ETA

$ 1,835.99 USD

Add to Wish List

Qty

$ 1,835.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the S50 and S52 engines. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Exhaust- 308 Duration Exhaust @ 1mm - 274 Exhaust Peak Timing - 104 Cam Lobe Lift Exhaust - 13 Valve Lift w/o Valve Clearance Exhaust - 13 Valve Clearance Exhaust - 0, 25

Show More Show Less

BMW US S50 6 Cyl. 296-Degree - Intake Camshaft

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26671611

Part#: 0284E1960-0V1

Special Order: No Guaranteed ETA

$ 1,835.99 USD

Add to Wish List

Qty

$ 1,835.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the US S50 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake- 296 Duration Intake @ 1mm - 266 Intake Peak Timing - 122 Cam Lobe Lift Intake - 12, 4 Valve Lift w/o Valve Clearance Intake - 12, 4 Valve Clearance Intake - 0, 25

Show More Show Less

Cat Cams N54 Sport Camshaft Set

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:25805744

Part#: 1305001

In Stock

$ 1,950.00

This product was last offered at the strikethrough price on
05-03-2026

$ 1,803.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 1,950.00

This product was last offered at the strikethrough price on
05-03-2026

$ 1,803.99 USD

Limited Qty Sale

Add to Wish List

Upgrade your N54 Engine with Cat Cams, a leader in the performance-aftermarket camshaft industry. These Camshafts will increase airflow into the engine by increasing the overall lift and duration over the factory cams. With their Street cam setup, you can run all factory valvetrain, with no valve spring upgrades necessary! The VANOS (VVT) system on the intake camshaft changes the PD from 125° to 70°. The data are shown for full intake retard (disengaged VVT). The VANOS (VVT) system on the exhaust camshaft changes the PD from 130° to 85°. The data are shown for full exhaust advance (disengaged VVT). Check the distance between valves and piston to be 1mm at least with VVT engaged. Wrong installation will cause severe engine damage! The VANOS (VVT) system on the intake camshaft changes the PD from 125° to 70°. The data are shown for full intake retard (disengaged VVT). The VANOS (VVT) system on the exhaust camshaft changes the PD from 130° to 85°. The data are shown for full exhaust advance (disengaged VVT).

Show More Show Less

5150 AutoSport & Cat Cams Camshaft Set - 278* / 272* - 11.20mm / 10.3...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:39126861

Part#: N55CCCAM-278-272

Ships in 3 Business Days

$ 1,799.99 USD

Add to Wish List

Qty

$ 1,799.99 USD

Add to Wish List

Cat Cams offer great performance at a reasonable price. Cat Cam offers cams in the most popular enthusiast upgrade specs to ensure there is an option for whatever your power goal is. This N55 camshaft set is designed to bring your engine to the next level! Whether it's for street or track purposes, this camshaft set offers the power gains and throttle response needed to push your N55 to its limits. These camshafts are a direct fit for seamless installation and with some simple tuning can produces great power while retaining factory-like idle and driveability. Valvetronic and Dual VANOS functionality can be fully retained, or with an aftermarket throttle body, the valvetronic system can be locked open, providing even more control.

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Schrick Technical Information / Specs

Key Benefits:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results