Find Parts That Fit Your Vehicle

Emissions System

Is your BMW throwing emissions related codes? While we're primarily a BMW performance parts house, we understand the importance of maintaining your emissions system to pass inspection in your area and keep your check engine light off. Pick up your emissions related parts from Turner Motorsport.

Sub-Categories

Sort By:

Genuine BMW - Corporate Logo
T#:13027
Part#: 11617531423
Ships in 1-2 days
6% off MSRP $ 148.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 139.99 USD
Free Shipping
6% off MSRP
$ 148.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 139.99 USD
Free Shipping
The BMW N52 engine was deisgned with a crankcase vent system that relies on a heated oil separator valve to separate vapor from the liquid oil. Under ideal circumstances, the oil vapor would pass back into the intake and get burned up during normal combustion. The liquid oil would follow a path back down into the oil pan and be reused. This system is environmentally friendly but plagued with problems. The heating elements can fail or solid oil and carbon particles can block the oil separator valve. With no escape, the oil will continue to pool and collect in the valve cover or make its way into the combustion chamber leading to excessive oil consumption, blue smoke from the exhaust, idle and running issues. These issues are worse in colder climates where the freezing temperatures create a oil sludge condition that is impossible to clear. Thankfully, the CCV is replaceable on the early N52 engines (2006) and should be inspected during a major service and any time the valve cover is off. Oil can also back up into the throttle body, which is easier to check than the oil separator itself. Later N52 engines do not have a serviceable oil vent as it is integrated into the valve cover and not a separate part.

The oil separator can be replaced on its own but for a complete service we also recommend replacing the oil separator hoses and cleaning the valve cover. Any valve cover or intake manifold work should include a new oil separator valve.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 330i 330xi - Sedan
2006-2012 E91 BMW 325xi - Wagon
2006-2007 E60 BMW 525i 525xi 530i 530xi
2006-2008 E85 BMW Z4 3.0i Z4 3.0si
Show More Show Less
Genuine BMW - Corporate Logo
T#:14692
Part#: 11787836451
Ships in 1-2 days
6% off MSRP $ 445.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 418.99 USD
Free Shipping
6% off MSRP
$ 445.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 418.99 USD
Free Shipping


Genuine BMW Lambda Monitor Sensor - L=370mm
This item fits the following BMW Chassis:
E60 M5,E63 M6,E63

Fits BMW Engines including:
S85

Genuine BMW - Corporate Logo
T#:7062
Part#: 11727555680
Ships in 1-2 days
3% off MSRP $ 37.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 36.99 USD
Free Shipping on orders $49 and up
3% off MSRP
$ 37.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 36.99 USD
Free Shipping on orders $49 and up
The secondary air system helps to reduce emissions by pumping fresh air into the exhaust system ahead of the catalytic converter. As the air is heated it helps to combust the un-burned fuel coming from the engine as well as bring the catalytic converters up to operating temperature sooner. This hose connects the secondary air pump to the seconadary air pump with the secondary air valve.

This item fits the following BMWs:
1999-2003 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
Show More Show Less

Genuine BMW - Corporate Logo
T#:408100
Part#: 11787539137
Ships in 1-2 days
13% off MSRP $ 325.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 281.99 USD
Free Shipping
13% off MSRP
$ 325.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 281.99 USD
Free Shipping

Genuine BMW - Corporate Logo
T#:219746
Part#: 11158601619
In Stock
4% off MSRP $ 394.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 377.99 USD
Free Shipping
4% off MSRP
$ 394.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 377.99 USD
Free Shipping
​BMW part number 11158601619 is a genuine OEM crankcase ventilation intake pipe designed for specific BMW models. This component is integral to the engine's positive crankcase ventilation (PCV) system, directing blow-by gases from the crankcase back into the intake manifold for combustion. This process reduces emissions and helps maintain engine efficiency.​ Compatible BMW Models: BMW 750i (G12): 2016–2019​ BMW 750i xDrive (G12): 2016–2019​ BMW M550i xDrive (G30): 2018–2019
Show More Show Less
Genuine BMW - Corporate Logo
T#:7047
Part#: 11721433820
Ships in 1-2 days
4% off MSRP $ 26.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 25.99 USD
Free Shipping on orders $49 and up
4% off MSRP
$ 26.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 25.99 USD
Free Shipping on orders $49 and up


Genuine BMW Suction Hose - Tlev
This item fits the following BMW Chassis:
E36

Fits BMW Engines including:
M44


Genuine BMW - Corporate Logo
T#:37446
Part#: 11727557909
Ships in 1-2 days
8% off MSRP $ 148.32

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 136.99 USD
Free Shipping
8% off MSRP
$ 148.32

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 136.99 USD
Free Shipping


Genuine BMW Valve -
This item fits the following BMW Chassis:
E82,E90,E92,E93

Fits BMW Engines including:
N51,N51

Genuine BMW - Corporate Logo
T#:19163
Part#: 11151718642
Ships in 1-2 days
$ 34.99 USD
Free Shipping on orders $49 and up


Genuine BMW Volume Control Valve - Zyl.7-12

Fits BMW Engines including:
M70,S70


Genuine BMW - Corporate Logo
T#:367818
Part#: 13411710793
In Stock
2% off MSRP $ 108.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 106.99 USD
Free Shipping on orders $49 and up
2% off MSRP
$ 108.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 106.99 USD
Free Shipping on orders $49 and up

Genuine BMW - Corporate Logo
T#:37437
Part#: 11727555681
Ships in 1-2 days
2% off MSRP $ 54.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 53.99 USD
Free Shipping on orders $49 and up
2% off MSRP
$ 54.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 53.99 USD
Free Shipping on orders $49 and up


Genuine BMW Pressure Hose Assy -
This item fits the following BMW Chassis:
E46

Fits BMW Engines including:
M54,M56

Genuine BMW - Corporate Logo
T#:37393
Part#: 11721744247
Ships in 1-2 days
2% off MSRP $ 45.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 44.99 USD
Free Shipping on orders $49 and up
2% off MSRP
$ 45.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 44.99 USD
Free Shipping on orders $49 and up


Genuine BMW Pressure Hose Assy -
This item fits the following BMW Chassis:
E36

Fits BMW Engines including:
M52,S52

Genuine BMW - Corporate Logo
T#:37658
Part#: 11781742052
Ships in 5 Business Days
6% off MSRP $ 445.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 418.99 USD
Free Shipping
6% off MSRP
$ 445.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 418.99 USD
Free Shipping


Genuine BMW Lambda Monitor Sensor - L=325mm

Fits BMW Engines including:
M62,M73S62



FAE - Corporate Logo
T#:583149
Part#: 11787537984
Ships on Nov 10, 2026
$ 121.99 USD
Free Shipping
$ 121.99 USD
Free Shipping
Located on the catalytic converters, 2 required
Bavarian Autosport - Corporate Logo
T#:579869
Part#: 54546
In Stock
Sale - Save 20% $ 26.99

This product was last offered at the strikethrough price on
05-03-2026

$ 21.59 USD
Free Shipping on orders $49 and up
Sale - Save 20%
$ 26.99

This product was last offered at the strikethrough price on
05-03-2026

$ 21.59 USD
Free Shipping on orders $49 and up
Leak Detection Pump - Priced Each
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:35121140
Part#: 16137193479
In Stock
Sale - Save 18% $ 65.99

This product was last offered at the strikethrough price on
05-03-2026

$ 54.39 USD
Free Shipping on orders $49 and up
Sale - Save 18%
$ 65.99

This product was last offered at the strikethrough price on
05-03-2026

$ 54.39 USD
Free Shipping on orders $49 and up

Pierburg - Corporate Logo
T#:21966015
Part#: 11787537984
Ships on Feb 26, 2027
$ 170.99 USD
Free Shipping on orders $49 and up
If your vehicle has a bad oxygen sensor, chances are it may cause you to fail an emissions check. Replace bad oxygen sensors and eliminate those codes.

Bosch - Corporate Logo
T#:13046
Part#: 11781247406
Ships on Apr 9, 2027
$ 83.99 USD
Free Shipping
$ 83.99 USD
Free Shipping
This direct fit Bosch oxygen sensor plugs directly into your factory connector. Fits M44 engine Z3 and 3 series and M62 engine E39, E38, E31 with V8 engines. No cutting or splicing required. A new oxygen sensor can improve driveability and lengthen engine life. Bosch part number 13559.

This is the pre-catalytic converter oxygen sensor

This item fits the following BMWs:
1996-1998 E36 BMW 318i 318is 318ti 318ic
1997-1998 E39 BMW 540i
1996-2001 E38 BMW 740i 740il
1996-1998 Z3 BMW Z3 1.9
Show More Show Less
Genuine BMW - Corporate Logo
T#:177071
Part#: 11667613026
In Stock
8% off MSRP $ 49.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 45.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
8% off MSRP
$ 49.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 45.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up


Genuine BMW Vacuum Pipe With Non-Return Valve -
This item fits the following BMW Chassis:
F22,F30,F31,F32,F33,F34,F36

Fits BMW Engines including:
N20,N26,N55

Show More Show Less

FAE - Corporate Logo
T#:1196087
Part#: 11787545075
Ships in 7 Business Days
$ 100.99 USD
Free Shipping
$ 100.99 USD
Free Shipping
Fuel control and emissions control sensor
AUTOTECKNIC - Corporate Logo
T#:39971046
Part#: BM-0006-BCG
In Stock
$ 65.00 USD
Free Shipping on orders $49 and up
AutoTecknic - Carbon Competition Fuel Cap Cover - Various BMW and MINI Models is a premium exterior upgrade crafted from genuine carbon fiber, designed to enhance the aggressive styling and performance aesthetic of compatible BMW and MINI vehicles with an easy, OEM-fit installation.
Show More Show Less

PCV Vent Pipe
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:26438184
Part#: 11127588417
Special Order: No Guaranteed ETA
Sale - Save 21% $ 63.99

This product was last offered at the strikethrough price on
05-03-2026

$ 50.58 USD
Free Shipping on orders $49 and up
Sale - Save 21%
$ 63.99

This product was last offered at the strikethrough price on
05-03-2026

$ 50.58 USD
Free Shipping on orders $49 and up

Genuine BMW - Corporate Logo
T#:367749
Part#: 11781743994
Ships in 3 Business Days
6% off MSRP $ 404.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 380.99 USD
Free Shipping
6% off MSRP
$ 404.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 380.99 USD
Free Shipping
Vacuum Control Valve
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:47850818
Part#: 11747810831
Ships on Nov 10, 2026
Sale - Save 21% $ 26.99

This product was last offered at the strikethrough price on
05-03-2026

$ 21.21 USD
Free Shipping on orders $49 and up
Sale - Save 21%
$ 26.99

This product was last offered at the strikethrough price on
05-03-2026

$ 21.21 USD
Free Shipping on orders $49 and up
Bosch - Corporate Logo
T#:578934
Part#: 13878
In Stock
$ 154.13 USD
Free Shipping
$ 154.13 USD
Free Shipping

Is your Check Engine light illuminated and showing codes? It could be time to replace your Oxygen sensor. Specifically designed for MINI vehicles, the Oxygen sensor reads the fuel air mixture and communicates with the Engine Control Unit (ECU) to optimize fuel levels for performance. These sensors are of the heated type, with one required for pre-catalytic and another for post-catalytic functions. Keep an eye out for signs of a failing O2 sensor, such as a significant drop in gas mileage, before the Check Engine light appears.

  • Designed for MINI vehicles for optimal performance
  • Heated type sensors for pre-catalytic and post-catalytic functions
  • Helps optimize fuel levels for improved performance
  • Early warning sign of failing O2 sensor: dramatic decrease in gas mileage
Show More Show Less


Vent Hose for N14 N18 1.6L Engine
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:26238478
Part#: 11157605186
In Stock
Sale - Save 15% $ 31.99

This product was last offered at the strikethrough price on
09-16-2026

$ 27.19 USD
Free Shipping on orders $49 and up
Sale - Save 15%
$ 31.99

This product was last offered at the strikethrough price on
09-16-2026

$ 27.19 USD
Free Shipping on orders $49 and up

Upgrade your N14 N18 1.6L Engine with the Vent Hose. This hose connects to the top valve cover with a special hose clip end and extends to the bottom side of the intake manifold, ensuring optimal performance of your Mini. It's a crucial component of the intake system, designed to enhance engine efficiency and longevity.

  • Ensures proper ventilation of the engine
  • Connects securely to the valve cover and intake manifold
  • Facilitates efficient airflow within the engine compartment
  • Compatible with N14 N18 1.6L Engine models
  • Easy to install and replace as needed
Show More Show Less
Genuine BMW - Corporate Logo
T#:194487
Part#: 16197286301
Ships in 1-2 days
2% off MSRP $ 372.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 363.99 USD
2% off MSRP
$ 372.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 363.99 USD


Genuine BMW Metering Line -
This item fits the following BMW Chassis:
F25 X3

FAE - Corporate Logo
T#:26238379
Part#: 11787549860
In Stock
$ 104.99 USD
Free Shipping
$ 104.99 USD
Free Shipping

Ensure optimal engine performance with the FAE Oxygen Sensor for your MINI. Designed to read the fuel-air mixture, this heated sensor communicates with the ECU to maintain peak performance levels. Detect issues early and prevent a drop in gas mileage with this pre-cat oxygen sensor.

  • Monitors fuel-air mixture for optimal engine performance
  • Heated sensor type ensures accurate readings
  • Early detection of sensor issues prevents a decrease in gas mileage
  • Also known as a Lambda Probe
  • FAE brand product guarantees quality and reliability
Show More Show Less

Genuine BMW - Corporate Logo
T#:24079614
Part#: 11121025447
In Stock
6% off MSRP $ 308.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 290.99 USD
Free Shipping on orders $49 and up
6% off MSRP
$ 308.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 290.99 USD
Free Shipping on orders $49 and up
BMW's B58 engine has been great, but one major weakness is the PCV valve. As stated by BMW, "The PCV's rubber diaphragm seal may fail, causing insufficient engine oil separation. As a result, the engine may emit blue/white smoke from the exhaust tailpipes, shudder during operation, and/or run with reduced power (limp mode). At idle, a high-frequency whistling noise may be heard in the engine compartment, and the malfunction indicator lamp (MIL) may also illuminate." If your BMW is experiencing these issues, there is a very likely chance your PCV has failed. If so we recommend replacing your PCV with this Genuine BMW repair kit! Don't want to spend over $200 for this fix? We also offer T#23980285 which also replaces this valve but at roughly 1/10th the price!
Show More Show Less

Genuine BMW - Corporate Logo
T#:36140
Part#: 11537806706
In Stock
4% off MSRP $ 255.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 244.99 USD
Free Shipping
4% off MSRP
$ 255.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 244.99 USD
Free Shipping


Genuine BMW Return Pipe -
This item fits the following BMW Chassis:
E70 X5

Fits BMW Engines including:
M57

Genuine BMW - Corporate Logo
T#:20631
Part#: 11157522931
In Stock
21% off MSRP $ 154.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 125.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
21% off MSRP
$ 154.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 125.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
This is the oil separator hose that connects the crank case oil separator to the oil sump pipe for BMW's with the N52 6 cylinder engine.
When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 330i 330xi - Sedan
2006-2012 E91 BMW 325xi - Wagon
2006-2007 E60 BMW 525i 525xi 530i 530xi
2006 E85 BMW Z4 3.0i Z4 3.0si
Show More Show Less

Mishimoto - Corporate Logo
T#:383384
Part#: MMBCCN5406CBE
In Stock
$ 253.99 USD
Free Shipping
$ 253.99 USD
Free Shipping
Oil venting and circulation continues to be a problem on BMW engines and now even more so on the turbocharged N54 and N55 engines. The existing stock system does a very poor job of separating fluid and vapor and this leads to an oily film or even small pools of oil throughout the turbos and intake. We're seeing a lot more 135 and 335 cars with drivability and performance issues because oil has sneaked by the ring seals and is coating the intake piping, intercooler, intake valves, and other critical areas. The problem is worsened with higher boost levels. Oil is excellent for lubricating moving parts but terrible when it gets into the combustion chamber, effectively lowering the octane rating and reducing performance. Our own shop has gone the extra step and offers media and chemical blasting of the intake valves to strip away the oily buildup we have seen. Our shop also strongly recommends an oil catch can be installed in the line for the crankcase vent. The oil catch can traps oil as it leaves the valve cover and holds it in a canister. This catch can is located on the cooler side of the engine where the oil will condense easier and stay in the can. Whatever minimal vapors are left over in the oil is then vented back through the canister and into the intake where it is safe to be burned up in the engine or recirculated back through the system again. This is the way the system was designed! At each oil change simply unscrew the canister and empty the trapped oil with your regular used oil. Installing one of these will avoid costly repairs in the future and help maintain your boost and performance. It's one of the smartest modifications you can make because it demonstrates a well-thought out tuning strategy and care for the condition of your engine. The Mishimoto Oil Catch Can is made from aluminum and with a stealthy black anodized finish. It installs on the cooler side of the engine with a dedicated bracket and new oversized vent lines. The location is key as heat will evaporate the oil and send too much vapor back into the engine (where cooler air will turn it back into fluid). Note: Since the crankcase vent system is considered part of the overall emissions system, installing this may be a violation of local, state, and federal laws. While exemptions are made for track/race and off-road use, check with your local state inspection facility on using this in street-driven vehicles. This item fits the following BMWs with the N54 twin-turbo engine: 2008-2010 E82 E88 BMW 135i 2007-2010 E9X BMW 335i 335xi 2006-2010 E60 BMW 535i 535xi WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less
Burgaflex - Corporate Logo
T#:57725177
Part#: 11157522931
In Stock
New Item
$ 52.99 USD
Free Shipping on orders $49 and up
Maintain peak engine health and keep your crankcase ventilation system operating seamlessly with this high-grade engine breather hose from Burgaflex.

Secondary Air Injection Hose - Pump To Valve
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:594379
Part#: 11727557910
In Stock
$ 36.09

This product was last offered at the strikethrough price on
07-17-2026

$ 35.99 USD
Free Shipping on orders $49 and up
$ 35.99 USD
Free Shipping on orders $49 and up
Connects the air pump to the cold start valve.

Genuine BMW - Corporate Logo
T#:367734
Part#: 11781405324
In Stock
9% off MSRP $ 398.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 361.99 USD
Limited Qty Sale
Free Shipping
9% off MSRP
$ 398.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 361.99 USD
Limited Qty Sale
Free Shipping
ECS Tuning Universal Catch Can Drain System
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:583470
Part#: 003779ECS11
In Stock
Sale - Save 25% $ 71.99

This product was last offered at the strikethrough price on
06-14-2026

$ 53.99 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 71.99

This product was last offered at the strikethrough price on
06-14-2026

$ 53.99 USD
Free Shipping on orders $49 and up
Make draining your ECS or Turner Catch Can simple with this comprehensive kit
Burger Motorsports - Corporate Logo
T#:21045538
Part#: BMS-CC-GB58
Ships in 1 Business Day
Starting at $ 248.00 USD
Free Shipping on orders $49 and up
Starting at $ 248.00 USD
Free Shipping on orders $49 and up
It's no secret that the B58 BMW turbo motors can suffer from oil control problems causing the oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels the more apparent these problems become. The solution to this problem has finally arrived. The BMS oil catch can. While there are other catch cans on the market they all fall short in various areas. Some are mounted on the hot/turbo side of the motor preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation causing internal motor/ring sealing issues. Some have insufficient or no internal baffle system while others have internal baffles systems that are too restrictive. Some even bypass the PCV system all together venting crankcase gas and odor to the atmosphere. Most are simply repackaged oil catch cans from smaller/lower power motors shoehorned into place in the turbo BMW engine bay. To solve these problems Burger Motorsports designed their oil catch can kit from the ground up specifically for the B58 turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter and that flow rate is maintained throughout the entire oil catch can ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation preventing any PCV vapor from leaking to atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Install takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Made in the USA. KIT INCLUDES (1) BMS N54 Oil Catch Can (1) Billet B58 bracket (1) 90º billet fitting/nipple (1) Custom Silicone inlet hose (1) 3.5" Straight hose (2) Stainless steel bracket screws #10-32 x 1/2" internal hex socket head Includes BMS intake silencer delete for installation with factory intake.
Show More Show Less


Pierburg - Corporate Logo
T#:19278
Part#: 11727553066
Special Order: No Guaranteed ETA
$ 105.99 USD
Free Shipping
$ 105.99 USD
Free Shipping
OEM BMW ENGINE VALVE
ECS - Corporate Logo
T#:639091
Part#: 027619ECS09
Ships on Jan 26, 2027
Sale - Save 25% $ 405.99

This product was last offered at the strikethrough price on
06-14-2026

$ 304.49 USD
Free Shipping
Sale - Save 25%
$ 405.99

This product was last offered at the strikethrough price on
06-14-2026

$ 304.49 USD
Free Shipping
Reduce carbon build up on your intake
Pierburg - Corporate Logo
T#:362205
Part#: 11747810831
In Stock
$ 74.99

This product was last offered at the strikethrough price on
07-09-2026

$ 43.99 USD
Free Shipping on orders $49 and up
$ 43.99 USD
Free Shipping on orders $49 and up

This electric valve serves one of several purposes depending on which car it is used on. Please read the application listings below to ensure you are purchasing the correct part. 

Pierburg pumps are some of the most trusted and widely used on the market. From fuel, water, air and vacuum Pierburg has you covered with OE quality and reliable performance year after year.


This item fits the following BMWs:
Secondary Air System Valve
1996-1998 E36 BMW 323is 323ic 328i 328is 328ic M3
1999-3/2003 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2003-2005 E46 BMW 325i 325ci (M56)
1997-2003 E39 BMW 525i 528i 530i 
2000-2006 E53 BMW X5 3.0i 
1997-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i 
1997-2000 Z3 BMW M Roadster M Coupe (S52)

Show More Show Less

Genuine BMW - Corporate Logo
T#:62439
Part#: 34302283606
In Stock
14% off MSRP $ 91.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 82.99 USD
Limited Qty Sale
Free Shipping
14% off MSRP
$ 91.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 82.99 USD
Limited Qty Sale
Free Shipping


Genuine BMW Vacuum Pipe -
This item fits the following BMW Chassis:
E90,E92,E93


Bosch - Corporate Logo
T#:554853
Part#: 11787596908
Ships in 1 Business Day
$ 202.99

This product was last offered at the strikethrough price on
05-07-2026

$ 185.99 USD
Free Shipping
$ 185.99 USD
Free Shipping

BMW F Chassis Oxygen Sensor - Upstream Catalytic Converter is a critical component for monitoring exhaust emissions and optimizing engine performance. Positioned at the front of the exhaust manifold, this sensor, also known as a Lambda probe, provides essential data to your vehicle's computer, ensuring efficient operation and reduced emissions.

  • Precise Emissions Monitoring: Accurately measures exhaust gases to ensure optimal engine performance and compliance with emissions standards.
  • Enhanced Engine Efficiency: Relays vital information to the vehicle's computer to adjust fuel mixtures and improve overall efficiency.
  • Improved Fuel Economy: Helps in maintaining the correct air-fuel ratio, contributing to better fuel consumption.
  • Durable Construction: Built to withstand high temperatures and harsh conditions for long-lasting reliability.
  • Direct Replacement: Designed to fit seamlessly into the upstream catalytic converter position of BMW F chassis models.

Ensure your BMW F chassis operates at peak performance with the Upstream Catalytic Converter Oxygen Sensor, designed for precise emissions control and engine efficiency.

Show More Show Less
Pierburg - Corporate Logo
T#:362211
Part#: 11727571589
In Stock
$ 378.04

This product was last offered at the strikethrough price on
05-13-2026

$ 358.99 USD
Free Shipping
$ 358.99 USD
Free Shipping

This secondary air pump helps to reduce emissions by mixing fresh air with the exhaust. When this part fails cause a engine fault code and it will trigger a "service engine soon" light. 

This item fits the following BMWs:
3/2003-2005 E46 BMW 325i 325ci 325xi 330i 330ci 330xi 
2004-2005 E60 BMW 525i 530i
2004-2010 E60 BMW 545i M5
2004-2011 E63 BMW 645ci M6
10/2003-2006 E53 BMW X5 3.0i
2004-2005 E83 BMW X3 3.0i

Show More Show Less

Genuine BMW - Corporate Logo
T#:348228
Part#: 11157532629
Ships in 1-2 days
$ 39.99 USD
Free Shipping on orders $49 and up
$ 39.99 USD
Free Shipping on orders $49 and up
Leak Detection Pump
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:15445597
Part#: 16136756440
In Stock
$ 153.99

This product was last offered at the strikethrough price on
09-07-2026

$ 130.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
$ 153.99

This product was last offered at the strikethrough price on
09-07-2026

$ 130.99 USD
Limited Qty Sale
Free Shipping on orders $49 and up
Leak detection pump tests fuel containment system for vapor leaks to atmosphere. Failed pump often turns on check engine light.

E82 135i, E9X 335i, E60 535i ECS Baffled Oil Catch Can
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:388332
Part#: 003779ECS05A0
In Stock
Sale - Save 10% $ 238.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 215.09 USD
Free Shipping
Sale - Save 10%
$ 238.99

This product was last offered at the strikethrough price on
06-13-2026

Starting at $ 215.09 USD
Free Shipping

Oil venting and circulation continues to be a problem on BMW engines and now even more so on the turbocharged N54 and N55 engines. The existing stock system does a very poor job of separating fluid and vapor and this leads to an oily film or even small pools of oil throughout the turbos and intake. We're seeing a lot more 135 and 335 cars with drivability and performance issues because oil has sneaked by the ring seals and is coating the intake piping, intercooler, intake valves, and other critical areas. The problem is worsened with higher boost levels. Oil is excellent for lubricating moving parts but terrible when it gets into the combustion chamber, effectively lowering the octane rating and reducing performance. Our own shop has gone the extra step and offers media blasting of the intake valves to strip away the oily buildup we have seen.

Our shop also strongly recommends an oil catch can be installed in the line for the crankcase vent. The oil catch can traps oil as it leaves the valve cover and holds it in a canister. Whatever minimal vapors are left over in the oil is then vented back through the canister and into the intake where it is safe to be burned up in the engine or recirculated back through the system again. This is the way the system was designed! At each oil change simply unscrew the canister and empty the trapped oil with your regular used oil. A dipstick is integrated into the cap so you can monitor the oil level. Installing one of these will avoid costly repairs in the future and help maintain your boost and performance. It's one of the smartest modifications you can make because it demonstrates a well-thought out tuning strategy and care for the condition of your engine.

The ECS Oil Catch Can is made from aluminum and with a stealthy black anodized finish. Multiple brackets are available so you're not limited on where to mount it. The location is key as heat will evaporate the oil and send too much vapor back into the engine (where cooler air will turn it back into fluid). The ECS OCC also has a factory-like appearance.

Note: Since the crankcase vent system is considered part of the overall emissions system, installing this may be a violation of local, state, and federal laws. While exemptions are made for track/race and off-road use, check with your local state inspection facility on using this in street-driven vehicles.

ECS Oil Catch Can Features:
+ Increases air intake efficiency
+ Promotes engine longevity
+ 4 chamber design promotes excellent air/oil separation
+ Large In/Out ports (no tapered sizes that slow flow)
+ Anodized black lightweight aluminum
+ Made in USA

This item fits the following BMWs with the N54 twin-turbo engine:
2008-2010 E82 BMW 135i
2007-2010 E9X BMW 335i 335xi
2006-2010 E60 BMW 535i 535xi

Show More Show Less

Rein - Corporate Logo
T#:591596
Part#: 11157575641
In Stock
$ 45.99

This product was last offered at the strikethrough price on
04-30-2026

$ 44.99 USD
Free Shipping on orders $49 and up
$ 44.99 USD
Free Shipping on orders $49 and up
Replace your damaged crank vent pipe
Bosch - Corporate Logo
T#:4908027
Part#: 13907621174
In Stock
$ 63.99 USD
Free Shipping
$ 63.99 USD
Free Shipping

Upgrade your vehicle's fuel system with the BOSCH Fuel Tank Breather Valve 0 280 142 524, a high-quality component designed to enhance fuel efficiency and emissions control. Crafted by BOSCH, a renowned name in automotive technology, this breather valve offers precision engineering and reliable performance for your car.

Key Features:

  • Optimized Fuel System: BOSCH's Fuel Tank Breather Valve is engineered to maintain the proper balance of air and fuel in your vehicle's tank, ensuring optimal combustion and reducing emissions.
  • Enhanced Fuel Efficiency: By preventing excess air from entering the fuel tank and regulating pressure, this breather valve helps improve fuel efficiency, saving you money at the pump.
  • Reliable Emissions Control: Keep your vehicle environmentally friendly with the BOSCH breather valve, which plays a crucial role in controlling harmful emissions.
  • Quality Construction: Crafted with durability in mind, this breather valve is built to withstand the demands of your vehicle's fuel system, offering long-lasting performance.
  • Easy Installation: Designed for a straightforward installation process, it fits seamlessly into your fuel system, making it an excellent choice for both DIY enthusiasts and professional mechanics.

Upgrade your vehicle's fuel system with BOSCH, a trusted brand known for quality and innovation. The Fuel Tank Breather Valve 0 280 142 524 will help ensure your vehicle runs efficiently and responsibly, all while maintaining the high standards that BOSCH is recognized for. Make this essential upgrade today for a more efficient and eco-friendly ride.

Show More Show Less
Genuine BMW - Corporate Logo
T#:11946
Part#: 11157553949
In Stock
4% off MSRP $ 89.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 85.92 USD
Free Shipping on orders $49 and up
4% off MSRP
$ 89.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 85.92 USD
Free Shipping on orders $49 and up
This hose directs the oil & combustion vapors from the valve cover and directs them to the intake manifold where they are put through combustion again in order to reduce emissions. When installing one of our N54 Oil Catch Cans the connections on this hose will often break. We recommend replacing this hose at the same time as your catch can.
When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
2008-2010 E82 BMW 135i
2011+ E82 BMW 1M Coupe
2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2010 E93 BMW 335i - Convertible
2004-2010 E60 BMW 535i 535xi 535i xDrive
2009+ Z4 BMW Z4 sDrive35i Z4 sDrive35is
Show More Show Less


Genuine BMW - Corporate Logo
T#:36659
Part#: 11617838288
In Stock
6% off MSRP $ 71.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 67.99 USD
Free Shipping on orders $49 and up
6% off MSRP
$ 71.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 67.99 USD
Free Shipping on orders $49 and up


Genuine BMW Vent Hose -
This item fits the following BMW Chassis:
E90,E92,E93

Fits BMW Engines including:
S65

Bosch - Corporate Logo
T#:14686
Part#: 11787589475
In Stock
$ 223.99

This product was last offered at the strikethrough price on
04-30-2026

$ 172.99 USD
Free Shipping on orders $49 and up
$ 172.99 USD
Free Shipping on orders $49 and up

The oxygen sensor is vital to the performance and drivability of your car. The engine computer relies on data from the sensor to make adjustments in engine efficiency and performance. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today. There is no lifespan on O2 sensors but there are several fault codes that indicate a failed sensor (O2 monitoring, cat efficiency, O2 heating circuit, O2 readiness, and others). The O2 sensor is heated and has a self-calibration feature so once you get the codes or feel performance has suffered, a new sensor is a good starting point to get you back to peak performance. Bosch's Oxygen sensors are high quality and will give you the the longest and best performance for the price.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMW Chassis:
E82,E90,E92,E93,F30,F34

Fits BMW Engines including:
N55 - up to 08/2013

Show More Show Less