Oiling System

Black Oil Dipstick Billet Aluminum - M50/M52/S50/S52

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:384360

Part#: 009425ECS01-02

In Stock

Sale - Save 25% $ 88.99

This product was last offered at the strikethrough price on
06-13-2026

$ 66.74 USD

Add to Wish List

Qty

Sale - Save 25%

$ 88.99

This product was last offered at the strikethrough price on
06-13-2026

$ 66.74 USD

Add to Wish List

A beautiful addition and durable upgrade for your engine

Tired of staring at that bright red plastic oil dipstick? Waiting for a way to add a nice touch to your engine bay without going over the top? ECS Tuning is proud to announce the billet aluminum oil dipstick! Designed to OE specifications with an easy-to-read fill line, offered in three different finishes. Available in black, polished, or clear anodized, we have an offering for every type of enthusiast. Not only does it look better, but also performs better. Because of the durability, it is easier to insert than the factory ribbon dipstick. So, no more fighting with your dipstick to re-install it.

Show More Show Less

Genuine BMW Oil Filter Kit - M60 M62 S62 M70 M73 S70

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:348231

Part#: 11427510717

In Stock

16% off MSRP $ 35.59

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 30.01 USD

Add to Wish List

Qty

16% off MSRP

$ 35.59

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 30.01 USD

Add to Wish List

GENUINE BMW OIL FILTER 11427510717

N54/N55/S55/N52/N20/N26 Magnetic Billet Oil Filter Housing Cap - Blac...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5269536

Part#: OILCAPNXXS55BLA

In Stock

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

Paradigm Engineering’s magnetic oil filter cap augments your vehicle's oil filtration system and serves as a diagnostic tool. Each oil filter cap is CNC milled from a solid block of billet aluminum and fitted with a Samarium-Cobalt rare earth magnet. This magnet is in direct contact with pre-filtered oil, as a result, the magnet will naturally capture Ferrous particles within your engine oil. Ferrous particles in engine oil cause premature wear, obstruct the paper oil filter, and could be an indication of a serious issue within your engine.

Show More Show Less

ECS Tuning Low Temp Oil Thermostat - BMW N54 N55 3.0L (2008+ Models) ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For 2008 and up models only

T#:6924321

Part#: 090743ECS09

In Stock

Sale - Save 25% $ 79.99

This product was last offered at the strikethrough price on
06-14-2026

$ 59.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 79.99

This product was last offered at the strikethrough price on
06-14-2026

$ 59.99 USD

Add to Wish List

Is your N54/N55 oil temp running too high? The most likely cause is a faulty OE oil thermostat. With this ECS Low Temp Oil Thermostat Kit, you can keep your engine happy with oil temps holding between 194F (90c) to 230F (110c). This is the perfect solution for both higher milage models and models that have been tuned or further upgraded with performance turbochargers, Kit includes: Oil Thermostat Bung Oil Thermostat Spring Oil Thermostat Shaft Assembly

Show More Show Less

ECS Magnetic Oil Drain Plug - F80 M3, F82/83 M4 (up to 09/2014) ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:386493

Part#: 013862ECS01A

In Stock

Sale - Save 25% $ 41.99

This product was last offered at the strikethrough price on
06-13-2026

$ 31.49 USD

Add to Wish List

Qty

Sale - Save 25%

$ 41.99

This product was last offered at the strikethrough price on
06-13-2026

$ 31.49 USD

Add to Wish List

ECS Tuning now offers their magnetic drain plugs for your F8X BMW. Featuring a permanently mounted magnet, these plugs traps tiny metallic particles that are unable to be caught by your oil filter. Over time, these plugs save your bearings and oil pump from unneeded wear. Manufactured of 7075-T6 aluminum, the ECS Tuning magnetic drain plug is 80% stronger than the weaker (and much more common) 6061 aluminum. ECS magnetic drain plugs also capture many metal particles from wearing or recently rebuilt engines. The constant flaking effect of normal wear of reciprocating parts. Material missed after boring or machining. Small component breakdown caused by high RPM break-in. For vehicles with a production date up to 09/2014

Show More Show Less

OEM Mann Oil Filter Kits - Pack Of 5 - M20

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:370601

Part#: 11421266773

Ships in 9 Business Days

$ 32.99 USD

Add to Wish List

Qty

$ 32.99 USD

Add to Wish List

Stock up on oil filters and save some cash! You are going to need them, why not get a discount? This is an OEM Mann oil filter kit made with the same materials and design as the original oil filter used in BMW dealers (but at a better price!). The kit includes the oil filter, housing cap o-ring, and washer.

Show More Show Less

OEM Oil Filter With Drain Plug - F80 M3, F82 M4

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:393872

Part#: 11427566327S55

In Stock

Starting at $ 28.37 USD

Add to Wish List

Starting at $ 28.37 USD

Add to Wish List

Replacement oil filter kit with a new drain plug for 2015+ F80 M3/F82 M4. This filter is for the S55 engine, used in the M3/M4 and includes the new drain bolt recommended by BMW during an oil change.

CSF Race-Spec Dual Pass Oil Cooler - E46 S54

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:384658

Part#: 8032

In Stock

$ 549.00 USD

Add to Wish List

Qty

$ 549.00 USD

Add to Wish List

CSF is one of the premier cooling product specialists available on the market today. One item that is often overlooked is the oil cooler. Luckily CSF has taken up the task of upgrading the oil cooler as well. If the oil runs too hot, it can lead to a reduction in wear protection and damage to the head, block, or the turbo system. This unit has 17 cooling tubes in the front with anther 6 in the rear of the cooler and still fits in the stock location without any issues.

Fits the following BMW:
2001-2006 E46 BMW M3

Show More Show Less

AAF Oil Pan Baffle - E9x/E8x 335i/135i

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7624643

Part#: 116183

Ships in 1 Business Day

$ 190.00 USD

Add to Wish List

Qty

$ 190.00 USD

Add to Wish List

Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. This oil pan baffle by AAF keeps the oil at the pick up better than others on the market. Baffling the oil pan is extremely important. Under racing and track conditions, oil can move in the oil pan enough to cause extended moments of oil starvation. This can cause premature, and in some cases immediate, engine failure. The pan features a tight fit to keep oil from exiting under braking or cornering. A must have for all track cars. **Note: Requires Welding to install.

Show More Show Less

Genuine BMW Aluminum Oil Pan Bolt Set - F87 F83 F82 F80

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:222834

Part#: 11117853941

Ships in 2 Business Days

3% off MSRP $ 61.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 59.99 USD

Add to Wish List

Qty

3% off MSRP

$ 61.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 59.99 USD

Add to Wish List

Genuine BMW Set, Alu Bolts Oil Pump/Oil Pick-Up Pipe -

This item fits the following BMW Chassis:
F80,F82,F83,

This item fits the following BMW Engines:
S55,

Show More Show Less

Genuine BMW Oil Pump Chain

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:369641

Part#: 11417576915

In Stock

$ 34.66 USD

Add to Wish List

Qty

$ 34.66 USD

Add to Wish List

BMW Gray Filter Housing Cap - Blackline Performance Edition Oil ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:9901260

Part#: FXXOFH-G

In Stock

$ 147.00 USD

Add to Wish List

Qty

$ 147.00 USD

Add to Wish List

BMW Gray Filter Housing Cap - Blackline Performance Edition Oil is a premium upgrade designed to replace the standard OEM plastic oil filter housing cap. This high-quality billet aluminum cap enhances both the aesthetics and functionality of your BMW's engine.

Durable Construction: Made from 6061 T6 aluminum with a hard anodized finish for superior strength and longevity.
Improved Performance: Features better heat dissipation compared to the factory plastic cap, enhancing engine performance and reliability.
Enhanced Aesthetics: Adds a sleek, high-performance look to your engine bay with 3D precision post-milled detailing and the G Insignia Oil Filter Cage Stabilizer.
Easy Installation: CNC-formed hand grips and a 10mm Allen key maintenance port with a built-in scratch plate simplify the installation and maintenance process.
Direct Replacement: Retains the factory oil filter stalk and is compatible with BMW S55 and most N series engines using BMW part 11427525334.
Increased Longevity: Designed to increase the life span of your oil filter cap and provide a more reliable seal.

Show More Show Less

OEM Rein Aluminum Oil Filter Housing And Heat Exchanger - BMW B46A B4...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:31059484

Part#: 11428596283

In Stock

Sale - Save 5% $ 328.99

This product was last offered at the strikethrough price on
06-29-2026

$ 311.63 USD

Add to Wish List

Qty

Sale - Save 5%

$ 328.99

This product was last offered at the strikethrough price on
06-29-2026

$ 311.63 USD

Add to Wish List

The new upgraded Rein housing features full aluminum construction to eliminate many of the common causes for failure of the OE part, such as cracking or warping, and to ensure increased durability for a longer, problem-free service life. For easy installation, the oil filter cartridge and mounting hardware are included, as well as a pre-installed oil cooler. To ensure optimal performance, high-performance gasket materials are used throughout the assembly FEATURES & BENEFITS: Upgraded aluminum construction for increased durability and performance Pre-installed oil cooler for convenience Includes mounting hardware and oil filter cartridge High performance gasket materials used throughout the assembly

Show More Show Less

OEM Mann Oil Filter Kits - Pack Of 5 - S50 S52 S54

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:369690

Part#: 11427833769MH-5

In Stock

$ 66.99 USD

Add to Wish List

Qty

$ 66.99 USD

Add to Wish List

Stock up on oil filters and save some cash! You are going to need them, why not get a discount? This is an OEM Mann oil filter kit made with the same materials and design as the original oil filter used in BMW dealers (but at a better price!). The kit includes the oil filter, housing cap o-ring, and washer.

Show More Show Less

VAC Motorsports Oil Pan Baffle N55 3.0L Engine

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26038565

Part#: VAC-OPB-N55

In Stock

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

Upgrade your BMW's oil system with the VAC Motorsports N55 Oil Pan Baffle, an essential component for track and street enthusiasts. Engineered to maintain oil surrounding the pick-up at all times, this baffle is crucial for preventing oil pressure loss during hard cornering and acceleration. Trusted by some of the fastest BMWs worldwide, this baffle ensures engine longevity and performance under extreme conditions. Don't risk catastrophic engine failure—equip your BMW with the VAC Motorsports N55 Oil Pan Baffle today.

Benefits:

Prevents significant loss of oil pressure
Vital for track and street use
Ensures engine longevity and performance
Trusted by high-performance BMWs worldwide

Show More Show Less

Oil Pan Gasket - With Bolts

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:35727823

Part#: 11130396707KT

In Stock

$ 110.99 USD

Add to Wish List

Qty

$ 110.99 USD

Add to Wish List

BMS Oil Catch Can - S55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:38621421

Part#: BMS-OCC-S55

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Includes 18" NBT bung The S55 BMW turbo engine often faces oil control challenges, resulting in oil blow-by that contaminates the intercooler and charge piping, clogs intake valves and the VANOS system, lowers effective octane, and diminishes engine performance—especially at higher boost levels. The BMS Oil Catch Can provides the ultimate solution. Unlike generic catch cans that suffer from poor mounting, restrictive baffles, inadequate ventilation, or improper PCV integration, the BMS OCC is specifically engineered for turbo BMW applications. Key Features: ✅ CNC-machined precision construction—seamless design for a perfect fit and long-lasting durability ✅ Optimized hose diameter and flow rate—prevents crankcase pressure buildup ✅ Fully sealed PCV system—ensures no vapor leaks into the atmosphere ✅ Strategic mounting location—minimizes line length for efficient performance and a stealthy install ✅ Fast 20-minute installation—comes with all necessary hardware and is easily reversible ✅ Simple oil disposal—drain via the plug or removable base during oil changes Proudly made in the USA, the BMS Oil Catch Can delivers long-term engine protection while optimizing performance and reliability.

Show More Show Less

Genuine BMW Injection Valve - 11117506546

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:30744

Part#: 11117506546

In Stock

11% off MSRP $ 42.48

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 37.90 USD

Add to Wish List

Qty

11% off MSRP

$ 42.48

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 37.90 USD

Add to Wish List

Upgrade your BMW's performance with the Genuine BMW Injection Valve - 11117506546.

Designed for precision and reliability, this injection valve ensures optimal fuel delivery, enhancing engine efficiency and power. Trust Genuine BMW parts for seamless integration and long-lasting performance.

Enhances engine efficiency
Optimizes fuel delivery for improved performance
Genuine BMW quality ensures reliability and durability
Designed for seamless integration with BMW vehicles

Genuine BMW Injection Valve
This item fits the following BMW Chassis:
E60 M5,E63 M6,E82 1M Coupe,E63,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N51,N52,N52N,N54,N54T,N55,S55,S65,S85

Show More Show Less

Genuine BMW Bush Bearing / Intermediate Shaft Bearing - 11111280863 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:30616

Part#: 11111280863

Ships in 2 Business Days

$ 63.99 USD

Add to Wish List

Qty

$ 63.99 USD

Add to Wish List

Genuine BMW BUSH BEARING or M20 intermediate shaft bearing

OEM Oil Level Sensor - E46 E39 E60 E38 X3 X5 Z3 Z4 Z8

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:2123

Part#: 12617508003

Back Ordered

$ 84.39 USD

Add to Wish List

Qty

$ 84.39 USD

Add to Wish List

This is the oil level sensor / sender for BMW E46 E39 E60 E38 X3 X5 Z3 Z4 Z8.When this part fails it will illuminate a check light on the dash which indicates it needs to be replaced. Includes o-ring.Manufactured by Hella.

Hella is a premium manufacturer that supplies automotive lighting products for numerous car brands around the world. Their high quality, long lasting parts have made them a trusted brand chosen to help keep your BMW bright and visible for many years to come.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330xi M3
2008+ E90 BMW 335d
1999-2003 E39 BMW 528i 525i 530i M5
1998-2003 E39 BMW 540i
2004-2005 E60 BMW 525i 530i
1998-2001 E38 BMW 740i 740il 750il
2004-2006 E85 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
2000-2003 E53 BMW X5 4.4i X5 4.6is
1999-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
2001-2002 Z3 BMW Z3 M Roadster Z3 M Coupe
2003-2006 Z4 BMW Z4 2.5i Z4 3.0i
2000-2003 E52 BMW Z8

Show More Show Less

Oil Filter Housing With Filter H811H

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
5X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!

T#:39497971

Part#: 11428583895

In Stock

$ 208.99 USD

Add to Wish List

Qty

$ 208.99 USD

Add to Wish List

Mishimoto Baffled Oil Catch Can - F8X M2 M3 M4 S55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:637363

Part#: MMBCC-F80-15CBE

In Stock

$ 306.99 USD

Add to Wish List

Qty

$ 306.99 USD

Add to Wish List

Give your 2015–2020 BMW M3/M4 the protection it deserves with the Mishimoto Baffled Oil Catch Can Kit. The introduction of the S55 into the M3 and M4 in 2015 was the first time compact M’s saw turbos from the factory, but these engines brought along another long-standing tradition—blow-by. The Mishimoto BMW M3/M4 catch can kit uses proven engineering from the patent pending Mishimoto 2-Port Compact Baffled Oil Catch Can, with its 50-micron bronze filter and internal baffle, to better separate the oil from the crankcase vapors. The engineers at Mishimoto designed a CNC-machined lid that features large inlet and outlet ports to match the inner dimension of the CCV hose. This baffled oil catch can defends your intercooler, intake system, and VANOS system from oil blow-by and helps maintain proper octane levels to reduce potential detonation. The kit comes with two direct-fit hoses, which require no modification to the engine cover, and one direct-fit billet aluminum mounting bracket that is extremely easy to install and mounts the can in a serviceable location! Two aluminum, 3/4” barb fittings connect the hoses to the can. And, like every Mishimoto oil catch can, this baffled catch can kit comes with the Mishimoto Lifetime Warranty! Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you’ve seen what we’ve seen in the bottom of our catch cans, you won’t want that draining back into your oil either. *After installation, Mishimoto recommends checking the contents of the baffled catch cans every 1,000 miles until a baseline is established. Oil blow-by accumulation will vary with ambient temperatures and driving conditions. It is important that the contents of the can do not rise above the internal baffle* Features: Direct fit for the 2015–2020 F8X BMW M3 and M4 Single can mounts in line with the CCV system to separate oil from air using a 50-micron bronze filter Helps reduce carbon buildup on intake valves Patent-pending billet 6061 aluminum can sealed with Viton™ O-rings Installs in under 30 minutes Robust CNC-machined anodized aluminum bracket mounts the can in a serviceable location Includes pre-molded hoses for simplified installation Defends Vanos system and essential engine components from oil blow-by CNC-machined aluminum barbed fittings ensure a sturdy connection between lines and can Catch can has a 3 oz. capacity for longer servicing intervals Internal air diverter increases air turbulence to improve oil separation Helps maintain proper octane levels to reduce potential detonation Filter and can are fully serviceable Mishimoto Lifetime Warranty Included: (1) Compact Baffled Oil Catch Can (1) Application-Specific Mounting Bracket (2) Direct-Fit Hoses (2) 3/4" Aluminum Barbed Fittings (4) Worm Gear Clamps Mounting Hardware Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

ECS Billet Aluminum Oil Filter Cap - Black Anodized - N63 S63 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:641063

Part#: 006060LA01

In Stock

Sale - Save 25% $ 183.99

This product was last offered at the strikethrough price on
06-14-2026

$ 137.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 183.99

This product was last offered at the strikethrough price on
06-14-2026

$ 137.99 USD

Add to Wish List

BMW uses a lot of plastic in their engine components to save weight and money. Unfortunately, plastic is damaged easily and the factory oil filter cap needs a special tool to remove. This aluminum cap is much more sturdy and features a standard 19mm hex post on the top. 19mm is also the size of your engine oil drain plug, reducing the number of tools that you need to complete an oil change. This cap is designed to use the original o-ring seal so no special parts are required. You only have to remove the original 'filter cage' from the original cap and transfer it to the new aluminum cap. The satin black anodize blends in with the rest of your engine bay making this a smart and subtle upgrade.

Show More Show Less

SET OIL-FILTER ELEMENT

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:573594

Part#: 11428593186

In Stock

4% off MSRP $ 26.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 25.99 USD

Add to Wish List

Qty

4% off MSRP

$ 26.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 25.99 USD

Add to Wish List

VAC MOTORSPORTS OIL PUMP UPGRADE KIT

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7244417

Part#: VAC-OPUK-S54

In Stock

$ 274.99 USD

Add to Wish List

Qty

$ 274.99 USD

Add to Wish List

Achilles Motorsports E34 M50 Oil Pan Baffle Kit - E34 525i M50, E30 w...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For models with a 24v Swap (M5X, S5X engines) using the E34 525i M50 oil pan

T#:1150767

Part#: 11-AM-OPB-E34

Ships in 3 Business Days

$ 154.99 USD

Add to Wish List

Qty

$ 154.99 USD

Add to Wish List

The best solution for 24v Swapped E30's using an M50, M52, S50, S52US, S54, or Euro S50 Engine with the E34 525i M50 oil pan! The Achilles Motorsports Oil Pan Baffle was designed and manufactured to be used on racing, high-performance track, and street driven cars. Each baffle is precision laser cut from .090" heat-treated aluminum then hand-assembled and test fit to ensure accuracy and ease of installation. Achilles Motorsports' baffle design incorporates dual trap doors and a unique oil deflector that prevents oil from splashing out of the sump under hard braking. Together, these help minimize the sloshing of the oil inside the oil pan and keep oil accumulated around your pickup tube. The factory BMW oil pan doesn't do a very good job of keeping oil accumulated around the oil pick-up tube in high g-force situations. By keeping oil accumulated around the pickup tube you can eliminate the costly loss of oil pressure and potential damage to other vital engine parts commonly caused by high g-forces from hard acceleration and braking and high-speed cornering. Professional welding is required for installation!

Show More Show Less

AAF Oil Pan Baffle - E36/Z3 6Cyl

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:7593110

Part#: 11636

Ships in 1 Business Day

$ 150.00 USD

Add to Wish List

Qty

$ 150.00 USD

Add to Wish List

This oil pan baffle by AAF keeps the oil at the pick up better than others on the market. Baffling the oil pan is extremely important. Under racing and track conditions, oil can move in the oil pan enough to cause extended moments of oil starvation. This can cause premature, and in some cases immediate, engine failure. The pan features a tight fit to keep oil from exiting under braking or cornering. 10 gated holes control oil slosh in the sump. A must have for all track cars. **Note: Requires Welding to install. Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars.

Show More Show Less

OEM Mahle Oil Filter Kit - E9X M3 S65

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:372182

Part#: 11427837997

Ships in 1 Business Day

$ 23.99 USD

Add to Wish List

Qty

$ 23.99 USD

Add to Wish List

This is an OEM Mahle oil filter for the E9X M3 with S65 engine. Includes the filter, seal, and o-ring.

Genuine BMW Oil Pump Chain Tensioner - S62 5.0L

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:34880

Part#: 11411407056

Ships in 2 Business Days

4% off MSRP $ 68.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 65.99 USD

Add to Wish List

Qty

4% off MSRP

$ 68.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 65.99 USD

Add to Wish List

Genuine BMW Chain Tensioner
This item fits the following BMW Chassis:
E39 M5,E39

Fits BMW Engines including:
M62,S62

Temperature Senders M14x1.5 Oil Temperature Sensor / Drain Plug ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!

T#:5973262

Part#: 323-055

Ships on Jul 22, 2026

$ 36.99 USD

Add to Wish List

Qty

$ 36.99 USD

Add to Wish List

Gintani Race Oil Cooler Valve - N/S63, N74

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:26971830

Part#: GIN-001-RVC

Back Ordered

$ 170.00 USD

Add to Wish List

Qty

$ 170.00 USD

Add to Wish List

The engine oil cooler valve allows for increased flow to your engine oil heat exchanger resulting in lower running engine oil temperatures and more consistent performance.

Metal Oil Filter Housing Upgrade With Filter & Cooler - BMW B58TU (B5...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:43378540

Part#: B58G2OFH

In Stock

$ 279.00 USD

Add to Wish List

Qty

$ 279.00 USD

Add to Wish List

Upgraded metal oil filter housing designed to replace the faulty stock housing which is known to crack.

Magnetic Billet Oil Filter Housing Cap For N54/N55/S55/N52/N20/N26 - ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:5269538

Part#: OILCAPNXXS55BLU

In Stock

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

Paradigm Engineering’s magnetic oil filter cap augments your vehicle's oil filtration system and serves as a diagnostic tool. Each oil filter cap is CNC milled from a solid block of billet aluminum and fitted with a Samarium-Cobalt rare earth magnet. This magnet is in direct contact with pre-filtered oil, as a result, the magnet will naturally capture Ferrous particles within your engine oil. Ferrous particles in engine oil cause premature wear, obstruct the paper oil filter, and could be an indication of a serious issue within your engine.

Show More Show Less

Large Aluminum Oil Catch Can

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:597051

Part#: MMOCCLA

In Stock

$ 127.99 USD

Add to Wish List

Qty

$ 127.99 USD

Add to Wish List

WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Oil Cooler Thermostat Housing - E90 E92 E60 E82 N54 N55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:20650

Part#: 11427573212

In Stock

17% off MSRP $ 198.86

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 164.43 USD

Add to Wish List

Qty

17% off MSRP

$ 198.86

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 164.43 USD

Add to Wish List

Replace the oil filter housing/oil cooler thermostat housing with the thermostat on your BMW equipped with either the N54 or N55 6 cylinder turbo engine.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
2011-2013 E82 BMW 135i 135is 1M Coupe
2006-2011 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2013 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 335i 335is - Convertible
2007-2010 E60 BMW 535i 535xi 535i xDrive
2012+ F12 BMW 640i 640i xDrive
2013+ F06 BMW 640i Gran Coupe 640i xDrive Gran Coupe
2013+ F01 BMW 740i 740li 740li xDrive i
2013+ E84 BMW X1 xDrive35i

Show More Show Less

Mishimoto Universal Catch Can Kit - Carbon Fiber

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:372557

Part#: MMOCCCF

In Stock

$ 162.99 USD

Add to Wish List

Qty

$ 162.99 USD

Add to Wish List

Universal kit with a catch can and rubber hose; for retrofitting on a variety of vehicles. Carbon fiber catch can prevents a harmful buildup of oil inside of the turbocharger, intake manifold, intercooler and piping. Separates oil particles from PCV/CCV air Defends intercooler, intake system, and essential components from oil blow-by Made from lightweight carbon fiber Compact design makes for easy engine bay placement Checking fluid levels made easy with built in sight tube Comes complete with mounting bracket, hose, all necessary clamps, fittings, and mounting hardware Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Mishimoto Oil Line Fitting Adapter Kit - E46 Z4 E9X

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:380389

Part#: MMOCF-BMW

In Stock

$ 88.99 USD

Add to Wish List

Qty

$ 88.99 USD

Add to Wish List

Install a custom oil cooler on your street or track BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100% CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW E36 (Euro oil-housing equipped), E46, and E90 vehicles, and allows for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space for an oil accumulator or supercharger setup. Included in this kit are two stock BMW O-rings for leak-free installation. Features: Allows for use of -10AN fittings for custom oil cooler setup 100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate Includes durable stock BMW O-rings for leak-free installation Provides additional engine bay space for applications with an oil accumulator or supercharger setup Included as part of the Mishimoto BMW E46 M3 Oil Cooler Kit Mishimoto Lifetime Warranty Included: (1) Stainless Steel Fitting Clamp (2) -10AN Fittings (2) BMW Oil O-rings (1) M8 x 1.25 x 25mm Button-Head Bolt Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less

Automatic Transmission Oil Pan With Transmission Filter - BMW E9X E82...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:640488

Part#: 24117571217

In Stock

Sale - Save 15% $ 91.99

This product was last offered at the strikethrough price on
05-03-2026

$ 78.19 USD

Add to Wish List

Qty

Sale - Save 15%

$ 91.99

This product was last offered at the strikethrough price on
05-03-2026

$ 78.19 USD

Add to Wish List

GA6HP19Z Automatic Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles. This filter fits GA6HP19Z automatic transmissions. This will NOT fit the GA6L45R transmission. Please check your transmission to ensure it is the correct type. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.

Show More Show Less

OEM Hengst Engine Oil Filter Kit - Pack of 5 - M52 M54

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
5X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat! Hengst is our preferred OEM filtration supplier!

T#:586192

Part#: 11427512300HKT

In Stock

$ 54.99 USD

Add to Wish List

Qty

$ 54.99 USD

Add to Wish List

Stock up on oil filters and save some cash! You are going to need them, why not get a discount? This is an OEM Hengst oil filter kit made with the same materials and design as the original oil filter used in BMW dealers (but at a better price!). The kit includes the oil filter, housing cap o-ring, and washer.

Show More Show Less

Burger Motorsports Turbo Double Baffle Oil Catch Can - E82/88 E9X N55...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:581123

Part#: OCCN55

Ships in 3 Business Days

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

It's no secret that N55 BMW turbo motors can suffer from oil control problems causing oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels the more apparent these problems become. The solution to this problem has finally arrived. The BMS oil catch can. While there are other catch cans on the market they all fall short in various areas. Some are mounted on the hot/turbo side of the motor preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation causing internal motor/ring sealing issues. Some have insufficient or no internal baffle system while others have internal baffles systems that are too restrictive. Some even bypass the PCV system all together venting crankcase gas and odor to the atmosphere. Most are simply repackaged oil catch cans from smaller / lower power motors shoehorned into place in the turbo BMW engine bay. To solve these problems BMS designed their oil catch can kit from the ground up specifically for the turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter and that flow rate is maintained throughout the entire oil catch can ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation preventing any PCV vapor from leaking to the atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Install takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Made in the USA. FEATURES AND BENEFITS Increases Air Intake Efficiency Promotes Engine Longevity Non-Clogging Air/Oil Separation Double Baffle Free Flow Solid No Restriction Design Retains factory fully closed loop PCV operation Large Intake/Outlet No Tapering Down Stealth Mounting on Cool Side of the Motor Anodized Black Aluminum Made in USA & Guaranteed for Life Simply unscrew base every 3-6 months to empty or use the 1/8th NPT drain plug. Non-Clogging, No Service Needed Air/Oil Separation Double Baffle High flow to eliminate crankcase pressure caused by more restrictive designs Large 16mm+ inlet and outlet exceeds OEM PCV sizing Precision CNC Machined from Solid Blocks of High-Grade Aluminum

Show More Show Less

Vargas B58 Gen 1 One Way Crankcase Breather - F Chassis B58 3.0L ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For Gen1 B58 Engines

T#:638800

Part#: VTT-B58-BREATHER

Ships in 6 Business Days

Sale - Save 15% $ 127.99

This product was last offered at the strikethrough price on
07-02-2026

$ 108.79 USD

Add to Wish List

Qty

Sale - Save 15%

$ 127.99

This product was last offered at the strikethrough price on
07-02-2026

$ 108.79 USD

Add to Wish List

VTT is happy to introduce the first and only available plug and play ONE-WAY crankcase breather kit for BMW B58 applications. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay. FITS with the engine cover on. Engine cover can be removed, and installed without removing the breather. Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups, including our VTT Engine catch can for the ultimate in crankcase pressure relief. Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase. This breather will fit all B58 Vehicles that use the most common oil fill cap design. This does NOT mean it fits all BMW vehicles. The breather sits about 2.5″ tall from the valve cover oil cap area, and the filter is 2-3/4″ in diameter NOTE: NOT ALL THE B58 MODELS LISTED HAVE THE SAME HOOD CLEARANCE, WE CANNOT SAY WHICH MODELS WILL HAVE CLEARANCE ISSUES AND WHICH WILL NOT AS WE HAVE NOT TESTED FIT ON ALL MODELS. PLEASE TEST CLOSE YOUR HOOD CAREFULLY TO ENSURE CLEARANCE. IF IT DOES NOT FIT LET US KNOW, AND WE WILL GET YOU A REFUND ONCE THE BREATHER IS RETURNED.

Show More Show Less

URO Premium Aluminum Oil Pan - BMW E84 F3X F10 E89 N20 N26 2.0L ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:639280

Part#: 11137618512PRM

In Stock

$ 243.99 USD

Add to Wish List

Qty

$ 243.99 USD

Add to Wish List

If you've broken your factory plastic oil sump, it's time to upgrade! This aluminum pan from URO Parts is a guaranteed fit, featuring heavy-duty construction and an upgraded gasket. An extra drain plug is included for a complete, comprehensive repair. Features: Premium Aluminum Construction vs OEM Plastic Construction Improved gasket by eliminating notches that cause a leak path Guaranteed fitment Manufactured to OE dimensions for proper clearances and easy bolt-on installation High-strength alloy aluminum or stamped-steel construction ensures a warp-free seal between the oil pan and engine block Durable surface coating resists rust (steel models)

Show More Show Less

Genuine BMW Oil Cooler Pipe - Feed

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:46873

Part#: 17227567207

In Stock

2% off MSRP $ 249.71

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 244.99 USD

Add to Wish List

Qty

2% off MSRP

$ 249.71

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 244.99 USD

Add to Wish List

Genuine BMW Engine Oil Cooler Pipe, Flow -
This item fits the following BMW Chassis:
E90,E92,E93

Fits BMW Engines including:
N54,N54T,N55

Magnetic Oil Drain Plug (12x1.5) - Priced Each

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:369088

Part#: 002201ECS02A

In Stock

Sale - Save 25% $ 39.99

This product was last offered at the strikethrough price on
06-13-2026

$ 29.99 USD

Add to Wish List

Qty

Sale - Save 25%

$ 39.99

This product was last offered at the strikethrough price on
06-13-2026

$ 29.99 USD

Add to Wish List

ECS Tuning presents magnetic drain plugs tailored for your BMW, equipped with a permanently mounted magnet to trap ferrous metal suspended in your oil. These plugs capture tiny particles, typically evading the oil filter, resulting in a cleaner engine. Over time, this saves your bearings and oil pump from unnecessary wear. Crafted from robust 7075-T6 aluminum, the ECS Tuning M12 magnetic drain plug boasts 80% more strength than the common 6061 aluminum.

Permanently mounted magnet for metal particle trapping
Cleaner engine and extended bearing life
7075-T6 aluminum construction for superior strength
Captures metal particles from wearing or rebuilt engines
Ideal for normal wear of reciprocating parts
Torque to 18ft-lbs using a 17mm socket, like your stock drain plug

Show More Show Less

CSF Track Ready Race-Spec Oil Cooler - F22/23 F3X N55 3.0L

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
2X Entries For Our G87 M2 Sweepstakes!

T#:598761

Part#: 8145

In Stock

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

If you are having issues keeping your BMW's oil temps from going out of control, it may be time to upgrade your oil cooler! This N55 oil cooler for your BMW is specifically designed by CSF to offer the best cooling possible, keeping your engine happy and you on the track longer! Features & Specifications: Innovative 2-Core In-Series System Secondary In-Series Backside Cooler has an Additional 5 Rows of Cooling for a ~40% Increase in Heat Rejection Made with CSF’s AC Condenser Technology Using a 1-Row Super-High Pressure 26mm Multi-Channel Microtube High-Density Multi-Louvered Fin Design for Maximum Surface Area Contact Converted to a Single-Pass Design with High-Pressure Return Line for Optimal Flow “Drop-In Fit” Requiring No Modifications to Install – Accepts All Attaching OEM Components Including Oil-Line Connections, Mounting Brackets and Shroud/Ducting World’s 1st and Only True “Plug-And-Play” Upgraded Engine Oil Cooler for the BMW N55 Engine Track Tested and Proven by Hittman Racing’s M235iR Endurance Race Car Requires Additional ½ Quart for Proper Fill-up During Installation (OEM Cooler: 7 Qts./ CSF’s Upgrade Race-Spec N55 Oil Cooler: ~7.5 Quarts) OEM #: 17217618360

Show More Show Less

Genuine BMW Oil Filter - E21 320i, E30 M3

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:377057

Part#: 11421258038

Ships in 2 Business Days

Sale - Save 8% $ 27.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 25.72 USD

Add to Wish List

Qty

Sale - Save 8%

$ 27.99

This product was last offered at the strikethrough price on
06-25-2026

$ 25.72 USD

Add to Wish List

Ensure your engine is protected and your oil is free of any contaminants with this oil filter from Genuine BMW

OEM Hengst Engine Oil Filter Kit - Pack of 5 - N20 N52 N54 N55 ...

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
5X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat! Hengst is our preferred OEM filtration supplier!

T#:567541

Part#: 11427566327

In Stock

$ 50.99 USD

Add to Wish List

Qty

$ 50.99 USD

Add to Wish List

Stock up on oil filters and save some cash! You are going to need them, why not get a discount? This is an OEM Hengst oil filter kit made with the same materials and design as the original oil filter used in BMW dealers (but at a better price!). The kit includes the oil filter, housing cap o-ring, and washer.

Show More Show Less

Weistec BMW BMW S63 Billet Oil Filter Cap - Black

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms

T#:22690726

Part#: 01-563-01794-6

Ships in 1 Business Day

$ 239.00 USD

Add to Wish List

Qty

$ 239.00 USD

Add to Wish List

Direct replacement/bolt in for the S63 and S63TU engines. CNC machined 6061 aluminum Anodized in Black

MMR Low Temp Thermostat - N54/N55

affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For 2008 and up models

T#:4565826

Part#: MMR17-0101

Ships in 1 Business Day

$ 70.99 USD

Add to Wish List

Qty

$ 70.99 USD

Add to Wish List

MMR's Low Temp Oil Thermostat is one of the easiest ways to increase your oil cooling capability. Rated to maintain the oil temps at about 194F (90c) to 230F (110c). Machined from aircraft grade T-6061 aluminum and anodized in MMR's trademark finish for durability. Installation is easy as it fits right into the OEM oil thermostat housing on the N54 and N55. Highly recommended for cars used on the track or with a higher power and torque output than stock.

Show More Show Less