Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
This product was last offered at the strikethrough price on
08-26-2026
This product was last offered at the strikethrough price on
08-26-2026
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
For over two decades, aFe (Advanced FLOW Engineering) has been a renowned name, crafting high-quality accessories right in Corona, California. Their product range, which began with air filters and intake systems, has now expanded to encompass exhaust systems, suspension components, tuning modules, and more. aFe products are your pathway to enhancing your BMW's performance while preserving its essential character.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
Following in the footsteps of the immensely popular and heralded intake for the BMW N55 engine, the next generation of 6 cylinder intake takes the same path to success. Improve upon the factory design by increasing flow via a larger air box and filter element thereby improving throttle response and lessening the strain on the turbocharger for maximum efficiency. While box and filter enlargement and redesign is a major factor in ultimately producing a more potent intake they are not the only variables in creating a more efficient design either. The devil is in the details which is where Dinan thrives. Coupled with maintaining Dinan's standard practice of utilizing a sealed system to ensure as much cold, outside air as possible is employed Dinan engineers focused their attention on the intake pipe itself where numerous improvements could be made. In factory configuration the intake tube comes complete with baffling and a small helmholtz chamber to reduce unwanted sound. As a byproduct these features also cause a more turbulent air flow path which robs the factory system of potential power. These 2 specific details are diametrically opposed to our intended markets desires so the removal of these features was paramount. Through numerous iterations a carbon fiber intake tube was developed that eliminated flow disruptions and allowed the natural sound of an unimpeded intake tract to sing. All told this thorough methodology of design allows the Dinan carbon fiber cold air intake for the B58 engine to elicit gains of 15 HP and 13 TRQ @ 6000 RPM on a completely stock vehicle. An impressive feat on today's turbocharged engines.
Not to be outdone by the performance side of the equation the B58 intake also is completely made up of carbon fiber unlike 6 cylinder intakes of the past where a mix of materials was used. Not only is the intake completely carbon construction but the quality of the material has been improved over previous generations as well. While looks are surely important, and this piece has that department covered in spades, the improved construction and coating also guarantees that the appearance of the engine bay with the Dinan intake will not be marred over time. Built to present well, perform well, and last the duration, the Dinan B58 carbon fiber cold air intake is a modification that is a must for any high high performance build.
Benefits of the Dinan Carbon Fiber High Flow Air Intake for the F22/F23 M240i, F30/F34 340i and F32/F33/F36 440i:
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
The S55's factory intake system is a major bottleneck, muting its aggressive twin-turbocharged soundtrack and restricting performance. Oversized airboxes, restrictive paper filters, and charcoal pre-filters choke airflow, limiting power and induction noise. The result? An underwhelming driving experience that doesn’t do the twin-turbo-six justice.
ECS aims to solve this issue with their Luft-Technik Performance Intake System—engineered to optimize airflow, amplify induction sound, and completely transform your engine bay. By replacing the factory restrictions with a high-flow design, this system unleashes the S55’s true potential, delivering sharper throttle response, enhanced turbo efficiency, and an intoxicating intake note.
At its core, the Luft-Technik intake is comprised of dual aluminum inlet tubes, designed for both strength and function. Constructed from 6061 aluminum and finished in a wrinkle black powder coat, these tubes are built to withstand high engine bay temperatures and extreme conditions. Using advanced CAD modeling, ECS engineers optimized the tubing shape to ensure perfect MAF sensor scaling, maintaining factory AFR (air-to-fuel ratio) for peak reliability and efficiency. The unique ovular profile maximizes clearance around critical engine components while allowing for the largest possible inlet diameter. The crossover tube features standoffs for secure heat exchanger hose mounting and a CNC-machined 6061-T6 billet aluminum MAF flange and vacuum port, ensuring seamless integration with factory connections.
To prevent heat soaking and maintain consistent performance, our intake system incorporates precision-cut aluminum heat shields. Finished in a durable wrinkle black powder coat, the heat shields feature a rubber edge trim that seals against the hood, preventing engine bay heat from infiltrating the air intake tract. This results in lower intake air temperatures (IATs), improved air density, and overall improved performance even under demanding conditions.
Key Features:
Aluminum Inlet Tubes 6061 aluminum construction for durability and heat resistance Wrinkle black powder coat for a sleek, OEM+ finish Optimized ovular shape for maximum clearance and airflow Gradual transitions eliminate sharp bends for smoother intake flow MAF scaling matched to factory specs for precise AFR control CNC-machined 6061-T6 MAF flange and vacuum port for OEM fitment Aluminum Heat Shields One-piece aluminum construction for durability and heat isolation Wrinkle black powder coat for a stealthy appearance and heat resistance Rubber edge molding creates a perfect seal against the hood, blocking hot air Mounts to factory locations for hassle-free installation High-Flow Dual-Cone Air Filters 8-ply cotton gauze construction for superior filtration and flow Bellmouth 3" flange inlet minimizes turbulence and maximizes efficiency Enhanced induction noise for an aggressive turbocharged soundtrack Installation & Support:
Click HERE for a guided installation tutorial!
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
Bespoke. A word that perfectly encapsulates the mindset of Eventuri. Performance parts with an obsessive attention to detail and an unyielding dedication to quality. Perfectly designed to maximize the potential of each individual vehicle and meticulously refined through rigorous testing. Eventuri offers a product that stands in a class of its own and delivers outstanding power increases without making false claims or exaggerating dyno numbers. With patented designs such as a custom velocity stack filter housing and improved ducting that guides the flow of air into the engine, to the breathtaking uniformity of the weave pattern. These are performance products for the truly discerning customer.
When it comes to styling a vehicle the proper look is one that compliments not cheapens the inherent design. Race inspired carbon fiber completes the look and style of every BMW M-powered model and Eventuri delivers on an entirely new level.
Made from 100% prepreg carbon fiber of the highest quality, the workmanship on the housing is second to none. This encapsulates the filter and is mated to an anodized aluminum inlet cowl to ensure a smooth inlet flow path. The filter itself is a deep pleated, high flow double cone configuration which is dry to avoid damaging the MAF sensor. Finally, the assembly is then mated to an aluminum heat shield which effectively shrouds the intake from engine bay heat and captures the ambient air being diverted from the scoop. Also, notice the rubber spacer on the mount of the heat shield - this is for the headlight module to sit on so that it remains at the right height - small details are important!
100% Prepreg carbon fiber with a CNC machined collar - the air scoop forces ambient air directly into the filter opening. This scoop simply clicks into place in the front right-hand brake duct and effectively saturates the mouth of the intake with cold air. It has been designed to take up half the height of the duct in order to allow airflow to still continue through the duct for the brakes. The scoop is so effective that even after a hard drive, the aluminum cowl at the mouth of the intake will still feel cold to touch!
Each intake system includes:
This part fits the following BMWs:
2018+ F90 M5
This product was last offered at the strikethrough price on
08-11-2026
This product was last offered at the strikethrough price on
08-11-2026
This product was last offered at the strikethrough price on
08-26-2026
This product was last offered at the strikethrough price on
08-26-2026
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
Revitalize your BMW's performance with the Dinan Replacement Air Filter designed for Dinan air intake model D760-0038. Whether your filter is dirty, damaged, or lost, this replacement ensures the restoration of Dinan's expected performance and maintains the optimal functioning of your BMW.
For more than 35 years, Dinan has been a leading tuning company in America, specializing in BMW modifications that prioritize balanced performance while preserving the original driving experience. Every Dinan part is meticulously developed, rigorously tested, and backed by a comprehensive four-year, 50,000-mile warranty. Dinan's commitment to a holistic enhancement approach is symbolized by an exclusive trunk badge awarded to enthusiasts who embrace a complete Dinan conversion, showcasing their dedication to elevated performance.
This product was last offered at the strikethrough price on
08-26-2026
BMW E60 E61 N52 Cold Air Intake System aFe Magnum FORCE Stage-2 Pro 5R is designed to significantly enhance the performance of your BMW by replacing the restrictive factory air box. This intake system features a 1.6mm powder-coated steel heat shield and a heat-resistant molded intake tube, which is trim-sealed to prevent hot engine air from entering. The kit includes a custom aFe brand Pro 5R cotton filter, known for its high airflow and exceptional filtration.
This intake system is a high-performance upgrade that enhances engine efficiency and driving experience. For installation instructions, please refer to the provided link.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
Bespoke. A word that perfectly encapsulates the mindset of Eventuri. Performance parts with an obsessive attention to detail and an unyielding dedication to quality. Perfectly designed to maximize the potential of each individual vehicle and meticulously refined through rigorous testing. Eventuri offers a product that stands in a class of its own and delivers outstanding power increases without making false claims or exaggerating dyno numbers. With patented designs such as a custom velocity stack filter housing and improved ducting that guides the flow of air into the engine, to the breathtaking uniformity of the weave pattern. These are performance products for the truly discerning customer.
When it comes to styling a vehicle the proper look is one that compliments, not cheapens the inherent design. Race inspired carbon fiber completes the look and style of every BMW M-powered model and Eventuri delivers on an entirely new level. Instead of simply offering black carbon and yellow kevlar that has become the norm, Eventuri has stepped things up by offering their carbon/kevlar accessories in multiple colors. Now you can choose between Blue, Red, Orange and Yellow weave to further set your ride apart from the pack.
Performance Increase : 12-15hp, 14-18ft-lb
The B58 Eventuri intake system is another example of a “Complete System” principal. It demonstrates the perfect balance between allowing for unrestricted airflow with our open filter housing whilst maintaining low IAT by cold air saturation with our scoop and shield combination. Every detail has been meticulously developed from the prepreg carbon pieces to the double layer heat shields. This intake sets a new benchmark in design and craftsmanship for the B58 platform.
The B58 Eventuri system uses a Patent Pending Carbon fiber Housing which provides an aerodynamically efficient airflow path from the filter to the turbo. Not just another cone filter with a heat shield but a unique design which invokes the Venturi affect and maintains laminar flow conditions to reduce the drag on the turbo.
The filter housing comprises of a high flow filter, aluminium cowl, laser cut bracket, carbon heat shroud and the carbon pod itself, which extends to incorporate the MAF sensor and turbo tube. The carbon pod shrouds the reverse mounted filter and smoothly shapes the airflow down to the integrated MAF intake tube. This smooth reduction in cross sectional area invokes the Venturi effect where the airflow accelerates whilst maintaining laminar conditions. It can be thought of as a large velocity stack. The carbon filter housing and the inlet tube have been integrated to be one continuous piece. This reduces the number of internal interfaces and allows for smoother airflow to the turbo. The diameter of the tube smoothly transitions from the required diameter at the MAF sensor end to the larger diameter of the turbo inlet.
A lot of attention was placed on the heat shielding since the intake is located next to the exhaust manifold. For this Eventuri used a double layer main shield with a silver finish on the exhaust side and black on the intake side. The silver layer reflects radiant heat from the exhaust and the black layer absorbs and radiant heat on the inlet side. The air gap between the two layers acts as an insulator to stop the conductive heat spreading to the inner layer.
Each intake system includes:
This kit fits the following BMWs:
2014+ F22 M240i
This unique intake system is designed to use the factory intake box to seal the intake tube and filter and tube against unwanted underhood temperatures while increasing air flow and velocity for optimum performance. This air intake system features either a ProDry S or Pro5R air (choose below), a dyno tuned intake tube and all the hardware necessary for an easy installation. This Stage 2 air intake system produces 12 horsepower, 9lbs. X ft. torque and out-flowed the factory intake by 41%. This system is truly a silent killer.
Choose the optional Carbon Fiber intake tube to reduce weight and enhance the visual appearance of the engine bay. The carbon fiber intake tube features a high gloss clear-coated 2 x 2 Twill Weave Carbon Fiber For Heat Protection, the tube is shaped to maintain factory fit and function.
Choose from Pro5R oiled filter for maximum flow or ProDry S oil-free filter media for maximum convenience.
Pro5R filter uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media.
video: E9x M3 aFe Intake Installation
ProDry S filter uses an oil-free filter media for less maintenance. This oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
This aFe Intake Kit fits the following BMWs:
2008+ E90 BMW M3 Sedan
2008+ E92 BMW M3 Coupe
2008+ E93 BMW M3 Convertible
This all-new Momentum Sealed Intake System produced 10hp and 14lbs. x ft. torque and outflows the factory intake by 42%. This system uses a PRO DRY S progressive mesh three layer synthetic "oil-free" filter for maximum airflow and convenience. Also included is a unique, patent-pending sealed airbox design to increase airflow using the factory air ram air scoop for maximum torque in all weather situations. The kit comes complete will all necessary hardware. Note: Does not fit vehicle with N26 engine. N26 engine is SULEV (super low emission) version of N20
3-1/2"Conical Pro 5R Air Filter: This intake utilizes a huge, 3-1/2" tall conical PRO 5R performance air filter for increased performance. The PRO 5R air filter uses five layers of progressively finer mesh cotton gauze media to provide maximum airflow for best performance results. Washable and reusable for multiple cleaning cycles, the tall, open, evenly spaced pleats provide excellent dust holding capacity for a longer service cycle between cleanings.
One-Piece Filter Housing: The air filter is housed in a one-piece, patent-pending black roto-molded airbox that keeps warm engine air out for maximum performance. This one-piece airbox uses factory mounting locations for a hassle-free installation.
Dyno Tested Intake Tube: The intake tube is designed to maximize air velocity and is dyno tested and flowed using the latest engineering tools for maximum performance, mileage and throttle response.
Horizontal Louvers: The louvers were added to the roto-molded airbox to increase the cold air to the air filter.
Fits the Following BMWs:
F30 320i 320xi 328i 328xi
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
The ECS Tuning Kohlefaser Luft-Technik (Carbon fiber Air Technology) line is a premium intake system designed to fit like OEM with added performance gains and appearance. This intake allows you to maintain a factory like seal enclosure and the ability to work with the JCW and GP2 strut tower brace.
The ECS Tuning Kohlefaser Luft-Technik Intake System features:
Gains of +3 WHP / +4 FT-LBS TQ on 100% Stock Vehicle Cooper S
Gains of +11 WHP / +10 FT-LBS TQ on 100% Stock Vehicle JCW
Broader and smoother torque curve for an enhanced driving experience
Sealed Carbon Fiber Upper, Lower Intake Box & Upper Intake Tube
4.5" - 5.0" ECS Tuning Performance Cone, Cotton Gauze, Reusable Air Filter
MINI Factory location clips
4-Ply Silicone Couplers, Stainless Steel Hose Clamps, and Hardware
*Not CARB Approved.
This K&N performance cold air intake kit eliminates the restrictive air box in favor of a high flowing intake system that allows for greater power all throughout the power band. Every K&N intake features a premium air filter that is constructed from cotton gauze material between aluminum mesh - this makes for a long lasting, high performance intake filter. These are very easy to remove and maintain. Turner Motorsport recommends this as one of the first maintenance/modifications you make to your vehicle after you purchase!
K&N's air filters allow increased airflow - dirt and particles stick to the oil on these filters, making them more effective than traditional paper filters in terms of protection. Additionally, K&N believes their filters are more efficient than paper filers - this means more oxygen getting into the engine, allowing vaporized fuel to burn more efficiently and increasing horsepower and fuel economy. The best of both worlds!
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Boost airflow and unleash a deeper induction sound to rekindle the excitement of driving your BMW E39 525i.
The Luft-Technik Intake System from ECS Tuning is purpose-built for M52TU and M54-powered 525i / 528I models, offering a performance upgrade that overcomes the restrictive factory airbox while maintaining a precise, factory-like fit. ECS Tuning engineered this system around the unique mounting geometry of the E39 chassis, ensuring an effortless bolt-on installation that integrates seamlessly with OEM components.
This performance intake features a high-flow conical air filter housed in a powder-coated aluminum heat shield, designed to seal against the hood and make full use of the factory inlet ducting. By drawing in cooler outside air, the system helps reduce intake temperatures for denser combustion and improved efficiency. A reinforced silicone intake elbow and a precision-engineered MAF housing keep the stock sensor in its proper location while smoothing airflow and reducing turbulence.
The results are immediately noticeable: quicker throttle response, a throatier intake growl, and a cleaner, performance-focused look under the hood. Built with premium materials such as stainless-steel hardware and heat-resistant silicone, ECS Tuning’s Luft-Technik Intake delivers both durability and long-term performance.
For BMW E39 525i / 528I drivers who want OE-level fitment with the benefits of sharper response, enhanced induction noise, and improved airflow, the Luft-Technik Intake by ECS Tuning is a must-have upgrade.
Key features:
21% increase in flow over the stock intake
Seals to the hood for the largest and coldest air space.
Unrestricted air flow for maximum induction noise.
The heat shield is designed to fit the E39 chassis perfectly, utilizing factory mounting locations, and creates a colder air pocket where the factory inlet duct is.
5052 powder-coated aluminum heatshield, stiff, corrosion-resistant, and finished for a long life in the swap environment.
The black silicone intake elbow and coupler is a compliant, high-temperature silicone that grips clamps and resists blow-off during repeated fitment and heat cycles.
Retains factory MAF
Stainless-steel hardware for longevity and corrosion resistance.
Fitment & compatibility:
Specifically engineered to work with utilizing that maximum air space and retaining the OEM cold air inlet. Mounts to the factory frame rail, no modification required.
Tailored to the M54B25 found in the 5-series chassis.
Kit Contents:
Heat Shield
Silicone Throttle Body Boot
MAF Mount
Silicone MAF Coupler
Inlet/Air Filter Adapter
Hi-flow ECS Conical Air Filter
E39 Specific Heat Shield Mount
Hardware for installation
Product Development: The Luft-Technik Intake System was designed, engineered, tested, and quality inspected by ECS Tuning's Research and Development team. Their process incorporates industry-leading tools and methods, including FARO laser scanning for reverse engineering and quality assurance, SolidWorks 3D CAD modeling, in-house 3D printing for rapid prototyping, and rigorous long-term product testing. Performance data is validated using both a Mustang AWD 500 SE in-ground dyno and a Superflow SF-750 Flowbench to ensure precision and reliability.
Installation and support: - Click HERE for Installation Instructions -
This product was last offered at the strikethrough price on
05-03-2026
This product was last offered at the strikethrough price on
05-03-2026
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
Following in the footsteps of its big brother on the B58 engine, the 4 cylinder intake takes the same path to success. Improve upon the factory design by increasing flow via a larger airbox and filter element thereby improving throttle response and lessening the strain on the turbocharger for maximum efficiency. While box and filter enlargement and redesign is a major factor in ultimately producing a more potent intake they are not the only variables in creating a more efficient design either. The devil is in the details which is where Dinan thrives. Coupled with maintaining Dinan's standard practice of utilizing a sealed system to ensure as much cold, outside air as possible is employed Dinan engineers focused their attention on the intake pipe itself where numerous improvements could be made. In factory configuration, the intake tube comes complete with baffling and a small helmholtz chamber to reduce unwanted sound. As a byproduct, these features also cause a more turbulent air flow path which robs the factory system of potential power. These 2 specific details are diametrically opposed to our intended markets desires so the removal of these features was paramount. Through numerous iterations, a carbon fiber intake tube was developed that eliminated flow disruptions and allowed the natural sound of an unimpeded intake tract to sing. All told this thorough methodology of design allows the Dinan carbon fiber cold air intake for the B46/B48 engine to elicit gains of 6 HP and 6 TRQ at 5000 RPM on a completely stock vehicle. An impressive feat on today's turbocharged engines.
Not to be outdone by the performance side of the equation the B46/B48 intake also is completely made up of carbon fiber unlike 4 cylinder intakes of the past where a mix of materials was used. Not only is the intake completely carbon construction but the quality of the material has been improved over previous generations as well. While looks are surely important, and this piece has that department covered in spades, the improved construction and coating also guarantee that the appearance of the engine bay with the Dinan intake will not be marred over time. Built to present well, perform well, and last the duration, the Dinan B46/B48 carbon fiber cold air intake is a modification that is a must for any high-performance build.
Benefits of the Dinan Carbon Fiber High Flow Air Intake for the F22/F23 230i, F30/F31/F34 330i, and F32/F33/F36 430i:
More Power: +6 HP & +6 lb-ft of torque at 5000 RPM
Sportier Sound
Improved throttle response
Larger volume air box (30% larger than stock) that completely seals
34% increase in filter area (stock: 76.3in², Dinan: 102.1in²)
Optimized carbon fiber intake tube
Free flowing injection molded Air Mass Meter housing (over 20% larger than stock)
Quick and easy installation
This Stage 2 cold air intake system produces 12 max horsepower, 16 lbs. x ft. torque and out-flowed the factory intake by 56%. This system includes a durable powder-coated heat shield and features a washable/reusable conical Pro 5R air filter for maximum flow. This air filter is constructed with 100% polyurethane, for long life and multiple cleaning cycles. A huge one-piece mandrel bent wrinkle-black powder-coated intake tube, maximizes air velocity providing maximum performance and throttle response. This is a direct bolt-on kit and requires no cutting or drilling.
Unique One-Piece High-Quality Housing:
A custom CAD designed roto-molded housing made of black, cross-linked, heat resistant polyethylene material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the airbox. The auxiliary air inlet allows for the maximum amount of air available for the intake.
High-Quality Tube:
This system uses a high-quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit.
Large 5-Layer Performance Air Filter:
This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a large 4" flange and is 6-1/2" tall. The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton gauze oiled media for better air flow, and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles.
Premium Hardware:
Premium stainless steel clamps and a silicone coupling are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.
Note:
This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
This part fits the following BMWs:
2011-2013 E82/88 135i N55
2011-2013 E9X 335i N55
2011-2015 E84 X1 35i
Maximum Flow Pro5R Filter
This intake kit replaces your restrictive factory air box. It features 1.6mm powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
By removing your stock intake air box, you are removing the most restrictive portion of your M3's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
12 hp gain at 4900 rpm!
11 lb/ft torque at 4900rpm!
This aFe intake fits the following BMWs:
E46 3 series: M3 Coupe, M3 Convertible
Introducing Eventuri's S62 Carbon Fiber Plenum Lid, a true masterpiece meticulously crafted from 100% prepreg carbon fiber. This plenum lid seamlessly replaces the standard plastic version, elevating the acoustic signature of the BMW S62 V8 engine. Although it doesn't provide a performance boost, it revolutionizes the auditory thrill of driving the M5/Z8, introducing a fresh dimension to the driving experience.
The resulting sound profile is a symphony of automotive excellence, featuring a deep, resonant tone at low RPMs that gradually ascends in pitch as acceleration intensifies. As you reach higher RPMs, this plenum lid imparts a sound reminiscent of the iconic CSL, creating an intoxicating driving experience. Eventuri's journey involved experimenting with different carbon thicknesses to fine-tune the sound, resulting in a plenum lid that not only increases volume but also produces a melodious induction sound.
Please note that this product does not include the M-Badge or M-Power Strip.
BMW Cold Air Intake System delivers more cool air to your BMW's engine, enhancing performance and producing an aggressive yet refined turbo whistle. Designed for significant performance improvements and ease of use, this intake system offers a range of benefits.
The Eventuri E9X M3 Carbon Fiber Plenum is crafted from 100% high-grade prepreg carbon, including the internal trumpets, replacing the stock plastic version. This upgrade enhances the acoustic experience of the naturally aspirated BMW V8 engine without impacting performance. Eventuri maintained the same internal volume as tuned by BMW to preserve the M3's power delivery characteristics.
While the carbon plenum doesn't offer a performance boost, it elevates the induction sound, transforming the M3's driving experience. The raw V8 rumble produced by the plenum imparts a CSL-like sound, creating an exhilarating driving sensation. Extensive testing with various carbon thicknesses has fine-tuned the sound, resulting in an astonishing induction volume and tone.
The Eventuri E9X M3 Carbon Fiber Plenum is compatible with both the OEM airbox and aftermarket intake systems. Pairing it with Eventuri's E9X M3 intake system unlocks genuine performance improvements.