Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Eventuri was founded by true enthusiasts who had a shared passion for cars and performance, engineers that had a background in Aeronautics as well as automotive tuning. After experiencing disappointment time and time again from the claims set forth by the automotive aftermarket, they set out to raise the bar. Their goal? Set a new benchmark for intake design providing true gains, not just "claims."
Designed to use the "venturi effect," Eventuri has created a unique intake system that out-performs the competition. The Venturi effect is when the smooth reduction in cross-sectional area along the length of the housing causes the airflow to increase in velocity. This means more air-flow and smoother delivery, resulting in more power. But that isn't all that sets their design apart. They also use an inverted cone filter that is decoupled from the MAF. This is done because it means the filter no longer dictates the shape of air-flow, thus creating the venturi effect.
Their systems are extensively developed using cutting edge design, testing and prototyping methods. With a focus on performance, each design undergoes CFD analysis and is then validated at the prototype stage through volumetric airflow, intake temperature and extensive dyno testing. They strive to publish all the development information to illustrate the depths they go in bringing an intake from concept to reality. Also assuring to only use the highest quality components for style and durability
Fits the following BMWs
2009+ E89 BMW Z4 sDrive35i
Maxiumum Flow Pro5R Filter
11.75 hp and 10.50 lb/ft torque gain!
This intake kit replaces your restrictive factory air box. It features a 3-angle velocity stack adapter, heat-block molded intake tube, 1.6mm powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
This version uses aFe's highest flowing filter media, which uses a light oil gauze to filter out dirt and particulates while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
By removing your stock intake air box, you are removing the most restrictive portion of your V8's intake system, increasing both horsepower and torque, improving acceleration as well as throttle response.
11.75 hp gain at 5900 rpm
10.50 lb/ft torque at 4000rpm
Clickhere for installation instructions.
This part fits the following BMWs:
2003 - 2010 E60 Sedan 550i
2004 - 2010 E63 6 Series Coupe 650i
This is a short ram intake and filter kit that will go in place of the restrictive and unattractive factory airbox. Feel a dramatic boost to throttle response and build boost faster by eliminating restrictions and widening the intake track. The Injen SP Series Intake Systems Feature the Patent Pending MR Technology Process for Optimal Gains and a Safe A/F Ratio. The Injen SP Series Intake System does not limit itself to just a Cold Air System or Short Ram System. The MR Technology process has its effects on both types. The Injen SP Series Intake is The World's First Tuned Intake System.
In 1999 Injen designed the first urethane filter with a built-in velocity stack for added performance. The Injen Technology Research and Development Team calculates each filters mesh and pleat count for each specific application during the development stages. Today the state-of-the-art Ea nano-fiber Injen/AMSOIL performance dry filter provides reliable performance and requires NO OIL. Both Injen Air Filters allow cleaning and durability for 1000's of miles to come.
Features:
Powdercoated heat shield
Polished short ram tubing
+13hp/11ftlbs.
Kit Includes:
Short ram intake piping
Heat shield
SuperNano Dry Web Dry Filters
Mounting hardware
Instuctions
This part fits the following BMWs:
2016 BMW M2 (F87)
2014-2016 BMW M235I (F22)
2012-2015 BMW 335I/IX (F30/31/34)
2014-2016 BMW 435I/IX (F32/33/36)
Maximum Flow Pro5R Filter
This intake kit replaces your restrictive factory air box. It features a 1.6mm powder-coated steel heat shield, heat-resistant molded intake tube, trim sealed to seal out hot engine air, and a custom application-specific aFe brand cotton filter.
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horsepower and torque, improving acceleration as well as throttle response.
This part fits the following BMWs:
2003 - 2006 E60 Sedan 525i 530i
This is a short ram intake and filter kit that will go in place of the restrictive and unattractive factory airbox. Feel a dramatic boost to throttle response and build boost faster by eliminating restrictions and widening the intake track. The Injen SP Series Intake Systems Feature the Patent Pending MR Technology Process for Optimal Gains and a Safe A/F Ratio. The Injen SP Series Intake System does not limit itself to just a Cold Air System or Short Ram System. The MR Technology process has its effects on both types. The Injen SP Series Intake is The World's First Tuned Intake System.
In 1999 Injen designed the first urethane filter with a built-in velocity stack for added performance. The Injen Technology Research and Development Team calculates each filters mesh and pleat count for each specific application during the development stages. Today the state-of-the-art Ea nano-fiber Injen/AMSOIL performance dry filter provides reliable performance and requires NO OIL. Both Injen Air Filters allow cleaning and durability for 1000's of miles to come.
Features:
Polished Black finish
+11hp/10ftlbs.
Heat shield
Kit Includes:
Heat shield
SuperNano Dry Web Dry Filter
Mounting hardware
Instructions
This part fits the following BMWs:
1992-1999 E36 323i 325i 328i M3
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
09-28-2026
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
HP Gain: +15hp
Trq Gain: +28ft-lbs
Airflow: +53% over stock
aFe has engineered the Momentum GT intake to outperform the stock air box and deliver substantial power and torque gains over the factory system. The Diesel 328d benefits from aFe's oversized cotton filter element in a Rotomold plastic housing that blocks heat saturated air while flowing more volume of cooler dense air. The system has been CAD designed to achieve the maximum volumetric flow rate into the turbo. The intake tube is a smooth, unobstructed single piece from the air inlet to the airbox and incorporates a port for the air flow sensor. aFe's advanced engineering and design have made this a direct bolt-in 328d intake upgrade.
The aFe filter has been designed specifically for this application and uses aFe's high flow/low maintenance design. The ProDry S filter has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe Pro5R filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
The CSF - Charge-Air-Cooler Manifold - BMW S58 “Level-Up” is a high-performance upgrade designed to elevate the cooling efficiency and power output of your BMW S58 engine. Specifically engineered for the BMW S58 platform, this advanced charge-air cooler manifold provides superior airflow and reduces intake temperatures, enhancing engine performance and reliability. With its precision design and top-quality construction, this manifold maximizes horsepower and torque, making it perfect for both street performance and racing applications.
Offered by Turner Motorsport, the CSF - Charge-Air-Cooler Manifold - BMW S58 “Level-Up” delivers unbeatable cooling and power gains, ensuring your BMW S58 engine operates at peak performance.
For BMW enthusiasts looking to take their S58 engine to the next level, the CSF - Charge-Air-Cooler Manifold - BMW S58 “Level-Up” from Turner Motorsport provides the ultimate solution for enhancing power and cooling performance.
This Stage 2 Sealed Intake produces up to 12hp and 16lbs. x ft. torque and outflows the factory intake by 56%. Fully enclosed in a molded plastic housing. this air intake system features a reusable air filter that improves airflow for increased horsepower and torque. The housing features auxiliary inlet duct for better airflow as well as a black vacuum formed plastic cover that provides ready access to the filter for servicing. This intake system also features a insulated molded plastic tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance.
The Karbonius E30 3-Series S54 CSL Carbon Airbox is a premium intake upgrade engineered for BMW enthusiasts seeking improved performance and iconic CSL styling. Designed to deliver superior airflow and breathtaking sound, this carbon airbox transforms the driving experience of E30 models fitted with the S54 engine. Manufactured using lightweight, high-strength carbon fiber, it combines durability with track-inspired aesthetics, making it a standout choice for any performance enthusiast. Available through Turner Motorsport, this airbox ensures seamless compatibility and exceptional quality.
Turner Motorsport provides expert support and access to the Karbonius E30 3-Series S54 CSL Carbon Airbox, ensuring BMW owners unlock their vehicle's full potential with this high-performance upgrade.
This product was last offered at the strikethrough price on
09-29-2026
This product was last offered at the strikethrough price on
09-29-2026
Unleash the true potential of your BMW X3/X4 M40i with the CTS Turbo Intake System, engineered to deliver unparalleled performance and a thrilling driving experience. Designed specifically for the B58 engine, this intake system combines precision engineering and premium materials to optimize airflow, enhance turbo response, and amplify the signature turbo sounds.
Features:
Maximum Airflow and Filtration:
Equipped with a high-performance, reusable air filter that ensures optimal airflow.
Heat-Resistant Design:
The included heat shield minimizes heat soak, directing cooler, denser air to the engine for improved combustion efficiency.
Durable Construction:
Lightweight aluminum piping with a sleek black powder-coated finish for a premium, long-lasting look.
Improved Turbo Sound:
Hear more intake spool every time you hit the throttle.
Seamless Installation:
Direct bolt-on design using factory mounting points for a perfect fit. Includes all necessary hardware for a hassle-free installation.
Benefits:
Noticeable horsepower and torque gains, especially when combined with performance tuning.
Enhanced throttle response and improved engine efficiency.
Designed to complement the aesthetic and performance of your BMW.
Fitment:
2018-2023 BMW X3 M40i (G01) – B58 Engine
2018-2023 BMW X4 M40i (G02) – B58 Engine
Bespoke. A word that perfectly encapsulates the mindset of Eventuri. Performance parts with an obsessive attention to detail and an unyielding dedication to quality. Perfectly designed to maximize the potential of each individual vehicle and meticulously refined through rigorous testing. Eventuri offers a product that stands in a class of its own and delivers outstanding power increases without making false claims or exaggerating dyno numbers. With patented designs such as a custom velocity stack filter housing and improved ducting that guides the flow of air into the engine, to the breathtaking uniformity of the weave pattern. These are performance products for the truly discerning customer.
When it comes to styling a vehicle the proper look is one that compliments not cheapens the inherent design. Race inspired carbon fiber completes the look and style of every BMW M-powered model and Eventuri delivers on an entirely new level.
Made from 100% prepreg carbon fiber of the highest quality, the workmanship on the housing is second to none. This encapsulates the filter and is mated to an anodized aluminum inlet cowl to ensure a smooth inlet flow path. The filter itself is a deep pleated, high flow double cone configuration which is dry to avoid damaging the MAF sensor. Finally, the assembly is then mated to an aluminum heat shield which effectively shrouds the intake from engine bay heat and captures the ambient air being diverted from the scoop. Also, notice the rubber spacer on the mount of the heat shield - this is for the headlight module to sit on so that it remains at the right height - small details are important!
100% Prepreg carbon fiber with a CNC machined collar - the air scoop forces ambient air directly into the filter opening. This scoop simply clicks into place in the front right-hand brake duct and effectively saturates the mouth of the intake with cold air. It has been designed to take up half the height of the duct in order to allow airflow to still continue through the duct for the brakes. The scoop is so effective that even after a hard drive, the aluminum cowl at the mouth of the intake will still feel cold to touch!
Each intake system includes:
This part fits the following BMWs:
1998 - 2004 E39 M5
This product was last offered at the strikethrough price on
09-29-2026
This product was last offered at the strikethrough price on
09-29-2026
Turner Motorsport introduces the Eventuri Intake System for the F40 M135i and F44 M235i, meticulously designed to redefine the standards in intake performance. Crafted by passionate enthusiasts and seasoned engineers with backgrounds in Aeronautics and automotive tuning, Eventuri focuses on delivering genuine gains rather than mere claims.
The Eventuri Difference:
Elevate your F40 M135i or F44 M235i with the Eventuri Intake System, where performance meets precision engineering.
This is a short ram intake and filter kit that will go in place of the restrictive and unattractive factory airbox. Feel a dramatic boost to throttle response and build boost faster by eliminating restrictions and widening the intake track. The Injen SP Series Intake Systems Feature the Patent Pending MR Technology Process for Optimal Gains and a Safe A/F Ratio. The Injen SP Series Intake System does not limit itself to just a Cold Air System or Short Ram System. The MR Technology process has its effects on both types. The Injen SP Series Intake is The World's First Tuned Intake System.
In 1999 Injen designed the first urethane filter with a built-in velocity stack for added performance. The Injen Technology Research and Development Team calculates each filters mesh and pleat count for each specific application during the development stages. Today the state-of-the-art Ea nano-fiber Injen/AMSOIL performance dry filter provides reliable performance and requires NO OIL. Both Injen Air Filters allow cleaning and durability for 1000's of miles to come.
Features:
Wrinkle Black finish
+11hp/10ftlbs.
Heat shield
Kit Includes:
Heat shield
SuperNano Dry Web Dry Filter
Mounting hardware
Instructions
This part fits the following BMWs:
2001-2006 E46 330i 330Ci
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
09-29-2026
In BMW's with the B46 engine, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with a new high flow inverted performance cone filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and the turbo spooling!
**B48/46 Engine (Transversally mounted BMW / MINI engine, intake on the right)**
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
09-28-2026
This Torque Booster tube is a great upgrade to your Stage 1 air intake, and can even be used to upgrade your factory intake system. Constructed of 3-ply silicone, it's smoother for less turbulence and more durable for less maintenance.
Since 1999, aFe (Advanced FLOW Engineering) has been developing and manufacturing high quality accessories in their facility in Corona, California. Starting with air filters and intake systems, and now expanding into exhaust systems, suspension components, tuning modules, and more, aFe products are a great way to improve the performance of your BMW without altering its fundamental character. Owned by a BMW enthusiast, aFe power is recognized the world over as a leader in quality performance products for your BMW.
This part fits the following BMWs:
2001-2007 E46 M3
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
09-29-2026
Built for performance and show, the Typhoon Air Intake System is a free-flowing mandrel-bent aluminum tube induction system designed to fit many sport compact performance vehicles. Each kit is proven on a rear-wheel dynamometer to increase horsepower and torque. Typhoon intakes come in one of three designs; cold air intakes (CA), short ram intakes (SR), or complete cold air (CCA) intakes which can be configured as either a cold air intake or a short ram intake. Available in an assortment of powder coated colors and polished aluminum, these kits are sure to please in every way. They come with an oversized High-Flow conical air filter designed to provide increased surface area and dust capacity. This extra surface area provides even more airflow at lower restriction than a standard K&N O/E replacement filter that is limited to the size of the factory air box. The oversize air filter also captures more dirt increasing the service life before a cleaning is required (up to 100,000 miles).
69-2001TWK Product Specifications
Product Style: 69 Series Typhoon Kits
Estimated Horsepower Gain: 8.9 HP @ 6000 RPM
Color: Black
Replacement Filter: RP-5113
CARB Exempt: No
System Type: Short-ram intake system
Weight: 8.7 lb (3.9 kg)
Product Box Length: 19.3 in (490 mm)
Product Box Width: 14.5 in (368 mm)
Product Box Height: 8.4 in (213 mm)
The Momentum GT Pro DRY S Cold Air Intake provides an impressive +90% Airflow increase over stock, allowing the N20 engine to breathe and perform to its greatest potential. The Pro DRY S Filter is made of a 3-layer synthetic media, providing additional air flow and filtration. The Pro DRY S is convenient, as it requires no re-oiling when being cleaned.
Unique One-Piece High Quality Housing:
A custom CAD designed roto-molded housing made of black, cross-linked, heat resistant polyethylene material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the airbox. The auxiliary air inlet allows for the maximum amount of air available for the intake.
High Quality Tube:
This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit.
Large 3-Layer Performance Air Filter:
This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a large 4" flange and is 6-1/2" tall. The Pro DRY S performance air filter features 3-layers of synthetic media providing maximum convenience with 100% polyurethane frame for long life and multiple cleaning cycles.
Premium Hardware:
Premium stainless steel clamps and a silicone coupling are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.
Note:
This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
This part fit the following BMWs:
E89 Z4 28i
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
09-29-2026
This is a short ram intake and filter kit that will go in place of the restrictive and unattractive factory airbox. Feel a dramatic boost to throttle response and build boost faster by eliminating restrictions and widening the intake track. The Injen SP Series Intake Systems Feature the Patent Pending MR Technology Process for Optimal Gains and a Safe A/F Ratio. The Injen SP Series Intake System does not limit itself to just a Cold Air System or Short Ram System. The MR Technology process has its effects on both types. The Injen SP Series Intake is The World's First Tuned Intake System.
In 1999 Injen designed the first urethane filter with a built-in velocity stack for added performance. The Injen Technology Research and Development Team calculates each filters mesh and pleat count for each specific application during the development stages. Today the state-of-the-art Ea nano-fiber Injen/AMSOIL performance dry filter provides reliable performance and requires NO OIL. Both Injen Air Filters allow cleaning and durability for 1000's of miles to come.
Features:
Dual intakes
Polished short ram tubing
+13hp/11ftlbs.
Kit Includes:
Short ram intake piping
2 SuperNano Dry Web Dry Filters
Mounting hardware
Instuctions
This part fits the following BMWs:
2008-2010 E60 535i
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
ECS High-Flow Intake for E46 – Unleash Performance and Induction Sound
Transform your E46 driving experience with the ECS High-Flow Intake, engineered for improved airflow, exhilarating induction noise, and a noticeable performance boost. Designed as a direct replacement for your restrictive factory intake, this system lets your engine breathe freely while delivering the aggressive intake sound every enthusiast craves.
Why Upgrade?
The factory intake system prioritizes refinement over performance, limiting airflow and muffling the intake noise for a subdued driving experience. The ECS intake changes the game by significantly increasing air intake efficiency and enhancing the auditory excitement under your hood. It’s a must-have for those seeking the perfect balance of power and sound.
Featured in Action:
Catch this intake in action on the ECS YouTube channel's "Chasing Down Track Times at Pitt Race!" episode, see and hear the difference for yourself.
Key Benefits:
Increased Airflow: Boosts intake efficiency by approximately 27%, flowing an average of 71 CFM more than the stock system.
Enhanced Induction Noise: Enjoy the raw, satisfying sound of air rushing into your engine.
Factory Compatibility: Maintains the stock air induction track and MAF location, allowing a seamless switch back to the factory airbox if needed.
Premium Design Features:
Constructed from durable, lightweight 6061 and 5052 aluminum with a wrinkle-black powder coat finish.
Includes a 7” oiled cotton gauze ECS filter for optimal filtration and airflow.
Silicone intake boot with improved flow replaces the failure-prone factory accordion boot, featuring provisions for F-connector and Idle Air Control (IAC) valve.
Stainless steel M6 hardware and aluminum brackets ensure a secure and reliable installation.
Complete Kit Contents:
Silicone inlet
Aluminum MAF flange
Mounting bracket
7” ECS filter (black)
Seals, clamps, and hardware for easy installation
Upgrade your E46 with the ECS High-Flow Intake for a driving experience filled with power, sound, and excitement. Breathe new life into your engine – order now!
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
Free-flowing intake featuring a roaring induction noise and increased performance to replace your restrictive factory intake.
Upgrade your E46 driving experience by adding induction noise and increased air flow. Let your engine breath and listen to the sweet sweet intake sounds!
With the factory intake you are limited to a finite amount of air, this leaves your engine under-served and limits induction noise. When it comes to the recipe for upgrading your E46 there are a few ingredients that you must have, power and sound. While you can add an exhaust for a bit more power and sound, the biggest difference you can make is adding power and sound under your hood with a high-flow intake. The factory intake box is also referred to as a silencer specifically designed to lower the induction noise for a refined driving experience, this helped exponentially when selling the cars out of the show room circa early 2000's. We as enthusiasts are no longer interested in subdued intake noise and limited air-flow, we want pure induction noise, we want to hear the air being sucked into the engine as we push down on the accelerator.
Key benefits:
Flows on average 71 CFM more than the stock intake system, a ~27% increase in intake efficiency
Increased induction noise
Maintains factory air induction track
Maintains Stock MAF location, allowing user to switch back to the stock airbox and retain the ECS Silicone boot if desired
Design:
Durable, lightweight 6061 and 5052 aluminum intake tube and bracket design, finished in wrinkle black powder coat
Mounts to locations on chassis utilizing Stainless Steel M6 hardware
MAF mounts to intake using aluminum brackets sealed to intake system with OEM fitment
Maximizes available engine bay space to fit oiled ECS cotton gauze 7” filter
Silicone intake boot with improved flow characteristics replaces failure-prone facotry accordion intake boot with provisions for F-connector fitting and Idle Air Control (IAC) valve inlet