Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
MINI R56 Scorpion Resonated Cat-Back Exhaust System Polished 90mm Daytona Tailpipes delivers an exceptional blend of performance and refined sound. Crafted in England, this stainless steel exhaust system is highly regarded by tuners worldwide and is now available in the U.S. through Turner Motorsport. Engineered for a noticeable horsepower boost, it offers a more subdued exhaust note compared to other free-flow systems, making it perfect for drivers seeking performance without excessive noise. Built with premium 304 stainless steel, this exhaust system is TüV certified, ensuring durability and quality.
Turner Motorsport E9X M3 S65 Carbon Intake Plenum
Unlock the full character of BMW’s legendary S65 V8 with Turner’s in-house engineered Carbon Fiber Intake Plenum—designed to enhance airflow, elevate induction sound, and integrate perfectly with OEM components.
Delivering over 13 CFM more airflow than the factory plenum, this upgraded unit is crafted entirely from high-grade prepreg carbon fiber, including the internal trumpets. The result? A stunning visual centerpiece and a dramatic increase in induction roar—an addictive, CSL-like soundtrack that transforms every throttle input.
Engineered by Turner, Built for Enthusiasts
Turner’s development process starts with a full 3D scan of the S65 engine bay. Our engineers refine every contour in SolidWorks before validating performance on a flow bench. The plenum is then produced using a 2x2 twill carbon weave and a UV-protected gloss clear coat for a long-lasting premium finish.
Multiple carbon layups were tested to fine-tune tone and resonance, culminating in an intake plenum that produces unbelievable induction volume and a razor-sharp V8 wail while maintaining factory fitment and sensor compatibility.
Key Features
CAD-designed for seamless integration with factory ducting and mounting points
100% prepreg 2x2 twill carbon fiber construction (including internal trumpets)
Gloss clear-coat finish for UV protection
Retains OEM IAT sensor and hose routing
Compatible with the stock airbox or any aftermarket intake system
Flows an average of 13 CFM more than the OE plenum
Pair it with Turner’s Carbon Fiber Intake System for maximum sound, performance, and engine bay presence.
Turner Motorsport E90/E92 M3 Stainless Steel Valved Axle-Back Exhaust – Brushed Tips
Add aggressive character to your S65 without sacrificing comfort or emissions compliance. The Turner Motorsport Valved Axle-Back Exhaust gives you full control of your M3’s personality—with quiet refinement when the valves are closed and a deep, motorsport-inspired growl at the touch of a button.
Designed specifically for the E90 and E92 M3, this system retains all factory secondary catalysts, making it fully emissions legal—including in California.
Engineered for Sound, Flow, and Easy Fitment
Mandrel-bent dual 2.5" 304 stainless steel piping feeds into high-flow, valved mufflers, all finished in a brushed stainless aesthetic. Using Accuseal slip-fit joints and the factory exhaust hangers, installation is straightforward and entirely bolt-on.
The supplied Turner Valve Controller Kit lets you switch exhaust mode anytime—giving you the best of both worlds: neighbor-friendly quiet on demand, and unmistakable S65 thunder when you want it.
Kit Includes
Turner Valved Axle-Back Exhaust w/ X-pipe section
Turner Adapter Pipes for factory mid-pipes
Turner Muffler Valve Controller Kit
Turner-engraved brushed exhaust tips
Features
Mandrel-bent dual 2.5” 304 stainless steel construction
High-flow, valved stainless steel mufflers
Brushed stainless finish
Turner-engraved straight-cut tips
Accuseal slip-fit joints for easy installation
Direct bolt-on, utilizing factory hangers
Compatible with all four OE catalytic converters
Performance Cat-Back Exhaust - E82/E88 135:
Lightweight cat-back featuring an exotic exhaust note. Designed for the perfect blend of performance and functionality!
Prepare to give your 1 series the boost it deserves. This cat-back exhaust was made to redefine the driving experience of your 135. Manufactured from premium brushed stainless steel, it is not just about reducing weight; it's about enhancing performance with unrestricted airflow. And the sound? It's a symphony of power and precision, carefully crafted for an unforgettable soundtrack. The sound experience is more than you could ask for. With the freedom of exhaust- flow and tuned exhaust note, we are very excited to get these exhausts on 135's everywhere, don't wait!
Featured on the ECS Tuning YouTube Channel!
When crafting the ECS exhaust systems, their primary focus is on achieving the perfect balance of sound and comfort. ECS's understand the desire for a thrilling exhaust note without the annoyance of highway drone or interior vibrations. The exhaust for your 135 incorporates this balance, offering a strageic blend of sportiness and practicality. Drawing from their extensive experience, particularly with N55 cars like the E9x series, they have engineered an exhaust packed with innovative features, compatible with both factory and aftermarket downpipes. Experience the perfect blend of performance and everyday usability.
There is something about a cat-back exhaust that is just so good. Being able to unbolt and replace the entire visible exhaust gives you butterflies in your stomach. A fresh new exhaust and just knowing that things are about to get rowdy. This exhaust features twin 2.5" brushed pipes with flanges that bolt directly to your factory and aftermarket down-pipes. The dual 2.5" mid-pipes make their way toward the rear axle and converge into a single 3" exhaust section. The 3" exhaust section snakes through the rear section of the car making smooth dips and curves to make its way into a light-weight 3" turbo style muffler. Don't be fooled by the 135 muffler, the size is nothing but deceiving. The turbo-style muffler features an inner design that refines the exhaust note to perfection. An extraordinary mixture of both tone and volume. Paired with the 3" muffler is your choice of 3.5" exhaust tips that give your rear diffuser a sporty look that shouts performance.
Although both N54 and N55 share identical exhaust geometry, the N55 mid-pipes do not feature secondaries. Though the N55 cat-back is compatible with N54 downpipes this is not suggested. Supposedly this N55 catback sounds absolutely glorious on an N54, even with aftermarket downpipes.
Features and Benefits:
Street/Motorsport inspiration Enhanced exhaust note Full exhaust replacement 25% lighter than stock! Stock cat-back: 56lbs ECS cat-back: 42lbs Reduction in back pressure for increased throttle response, TQ, and HP Dual 3.5" fitted exhaust tips Part Design:
In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment. T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged, and TIG-welded throughout Dual 2.5" Stainless Steel Mandrel Bent Tubing T304 Stainless Steel 12mm barbed exhaust hangers TIG-Welded in OE locations for precise fitment. Strategically placed slip joints provide the most adjustability to obtain perfect fitment Kit Contents:
Dual 2.5" mid-pipes 3" Rear exhaust section 3.0" free-flowing muffler section for better sound, and performance Clamps and Hardware for an OEM+ install Optional 3.5" ECS exhaust tips
Textured Black Rear Diffuser - E82/E88 M-Sport:
Presenting the ECS rear diffuser tailored exclusively for your 1 Series – a fusion of both aftermarket and factory styling. Rarely does one find a design that not only encapsulates every curve and contour of a vehicle but elevates its overall aesthetic with a single, impactful addition. Amongst the limited options available for the 1 Series, the engineers at ECS have risen to the challenge of providing aftermarket support for these perfectly sized vehicles.
The diffuser replaces the mundane factory M Sport diffuser with a perfectly fitting alternative, designed to enhance the rear end of the 1 Series. Using the existing factory hardware and tab mounting locations, a transformation is merely a few screws and a plastic trim tool away. During the prototype phase, an impressive fit and finish were achieved, but their commitment to excellence led them to make further refinements. With the updated design, the ECS diffuser is now polished to perfection, an indication of the craftsmanship invested in each product.
Installation is a breeze, requiring no drilling, cutting, or modifications of any kind. Simply remove the current valance, align the tabs, and effortlessly secure the diffuser in place using the factory mounting locations and hardware. Ensure a snug fit by verifying the alignment of all tabs, and with a gentle press, witness the tabs seamlessly click into position.
For those with a 1 Series, anticipate a wave of excitement as a range of exhaust options tailored to all motor variants, including the N52, N54, and N55, are unveiled.
Features and advantages:
Transformative Enhances the rear aesthetic of the 1 Series Direct fit utilizing factory clip locations and hardware Available in Textured Matte Black and Gloss Black Crafted from lightweight, vacuum-formed UV-stabilized gloss black ABS polymer Compatible with both E82 and E88 models equipped with the M-Sport Package
Get a Set of Turner Motorsport Performance Ignition Coils with Your ECS Tuning N54/N55 Cat-Back Exhaust Purchase! Upgrade your turbocharged E9X with the essentials: unleash a powerful exhaust note while enhancing ignition performance for an exhilarating drive.
ECS Tuning N54/N55 Cat-Back Exhaust for BMW E9X Take your 335i or 335xi to the next level with a high-performance cat-back exhaust designed to invigorate your driving experience. Constructed from premium brushed stainless steel, this ECS cat-back exhaust isn’t just about cutting weight—it’s about delivering unrestrained performance with a refined, yet powerful tone. Expect a thrilling soundtrack that underscores every shift and acceleration, giving you that much-needed connection to the road.
This exhaust system is crafted with balance in mind, providing a potent sound without the excessive drone that disrupts highway cruising. Designed for the N54 and N55 engines, it integrates seamlessly with both stock and aftermarket downpipes. Featuring twin 2.5” mandrel-bent pipes and turbo-style mufflers, this exhaust offers increased flow, weight savings, and a deep, exhilarating tone that complements the BMW’s high-output turbocharged engine.
Why Upgrade?
Better Sound and Flow: A dual 2.5” mid-pipe setup leads back to lightweight, turbo-style mufflers. Designed for unrestricted flow, the exhaust enhances horsepower, torque, and throttle response. Signature Tips: Complete with dual black chrome 3.5” tips, this system not only sounds incredible but looks the part, too. Weight Savings: Shedding 37% of the weight, this exhaust replaces the heavy factory cat-back and lightens your load to support a sportier feel. Improved Performance: Reduced backpressure for smoother, more responsive acceleration. Precision Engineering
Design Technology: Using FARO ARM laser scanning and SolidWorks 3D CAD, this system is built for an exact fit. High-Quality Materials: T304 stainless steel construction with 1.25mm wall thickness, TIG-welded for durability. OEM Fitment: Stainless steel hangers are welded in OE locations for a seamless, factory-quality installation. Adjustability: Strategic slip joints make adjustments easy, so you achieve the ideal alignment for your setup. What’s Included?
Dual 2.5” mid-pipes and rear exhaust section High-flow turbo-style mufflers Complete mounting hardware and clamps Black chrome 3.5” exhaust tips FREE Turner Motorsport Performance Ignition Coils As part of this special offer, enjoy a complimentary set of Turner Motorsport Performance Ignition Coils with your ECS Cat-Back Exhaust purchase. Built for durability and optimized spark, these ignition coils ensure your engine fires efficiently, supporting consistent power output and fuel economy.
Why Choose Turner Ignition Coils?
Boosted Performance: Enhanced spark energy translates to a stronger and more reliable combustion cycle. Direct Fitment: Engineered for seamless installation with your BMW’s ignition system. Distinctive Turner Blue: Adds a stylish touch to your engine bay, making it look as good as it performs. Benefits at a Glance
Enhanced Exhaust Sound: Deeper, more aggressive note with minimized cabin drone. Lighter Build: 37% lighter than stock for added agility. Free Ignition Coils: Improved spark for consistent performance and fuel efficiency. Performance Ready: Fully compatible with both OEM and aftermarket setups. Turn heads, enjoy the ride, and make the most out of your BMW’s power with this ECS Tuning N54/N55 Cat-Back Exhaust and Turner Ignition Coil combo—built for enthusiasts who demand the best in performance and style.
Doorbuster Deal: Turner Motorsport Aluminum Skid Plate with Your Purchase of a Performance Valved Cat-Back Exhaust!
Boost your BMW's power and style while safeguarding its vital components! With this exclusive offer, you get a heavy-duty skid plate to protect your oil cooler when you purchase the high-performance Turner Motorsport Cat-Back Exhaust for the G42 M240. Enjoy bold sound, enhanced performance, and peace of mind—all in one incredible upgrade.
G42 M240 Performance Valved Cat-Back Exhaust Unleash the true potential of your M240 with Turner Motorsport’s precision-engineered Cat-Back Exhaust, designed specifically for the B58 engine. From sound and style to pure performance, this exhaust system transforms your driving experience with an exhilarating soundtrack and unmistakable visual flair.
Engineered for performance, this exhaust system replaces the M240’s stock faux exhaust tips with striking quad 3.5" real tips. Made from premium 1.25mm T304 stainless steel, this cat-back exhaust offers superior durability, corrosion resistance, and a sleek look. Integrated valve control lets you adjust the exhaust tone to suit your driving mode, creating a refined, balanced note in comfort mode and an aggressive roar in sport mode. Turner’s unique muffler design maximizes flow when the valve is open, delivering pure, unrestrained sound and performance on demand.
Key Exhaust Features: Authentic Quad Tips: Upgrade from the stock imitation tips to real, polished quad tips that bring motorsport aesthetics to your M240. Valve-Controlled Sound: The factory valve control allows for sound customization—subtle in comfort mode, powerful in sport mode. Durable Construction: Built from high-grade T304 stainless steel for maximum durability and resistance to the elements. Optimized Flow Design: True 3.0" piping from the downpipe to the muffler, designed without a resonator to keep exhaust flow unrestricted. Performance You Can Feel Every aspect of the Turner cat-back exhaust is built with the driver in mind. The mandrel-bent, stainless steel piping ensures smooth airflow, while the strategically placed slip joints provide the perfect alignment and adjustability for a seamless, factory-like fit. The result? An unmistakable exhaust note and a substantial power boost.
What’s Included: 3.0" front exhaust section compatible with factory or aftermarket downpipes Lightweight, free-flowing midsection for maximum sound and performance gains Valved rear muffler for adjustable sound profiles Quad 3.5" optional exhaust tips for an aggressive rear profile Valve extension harness and all clamps/hardware for easy, bolt-on installation FREE G42 M240i Aluminum Skid Plate BMW’s newer high-powered engines, like the B58 and S58, require efficient cooling—but space constraints mean the oil cooler sits dangerously low and exposed. Protect this crucial component with Turner Motorsport’s heavy-duty skid plate. Constructed from 3/16" thick 5052 aluminum, this skid plate shields your oil cooler from debris and road impacts that could lead to severe engine damage. Unlike the factory plastic belly pan, Turner’s skid plate offers unmatched protection without compromising weight, aerodynamics, or cooling efficiency.
Designed to deflect debris while preserving airflow, this skid plate includes flared air channels to maintain cooling performance. It installs easily with factory hardware—no drilling or modification needed—and features a sleek black powder coat finish that’s both durable and stylish.
Skid Plate Benefits: Enhanced Protection: Protects against rocks, debris, and other hazards that could damage your oil cooler. Factory-Compatible Installation: Bolts directly onto your car with no modification needed. Aerodynamic Design: Preserves factory aerodynamics with cooling vents for optimal airflow to the oil cooler. Durable Construction: Made from 5052 aluminum with a black powder-coated finish for superior strength and longevity. Equip your M240 with Turner Motorsport’s Cat-Back Exhaust and Aluminum Skid Plate and experience a new level of performance and protection—your BMW deserves nothing less!
This product was last offered at the strikethrough price on
05-05-2026
This product was last offered at the strikethrough price on
05-05-2026
ECS Tuning N54/N55 Cat-Back Exhaust for BMW E9X Take your 335i or 335xi to the next level with a high-performance cat-back exhaust designed to invigorate your driving experience. Constructed from premium brushed stainless steel, this ECS cat-back exhaust isn’t just about cutting weight—it’s about delivering unrestrained performance with a refined, yet powerful tone. Expect a thrilling soundtrack that underscores every shift and acceleration, giving you that much-needed connection to the road.
This exhaust system is crafted with balance in mind, providing a potent sound without the excessive drone that disrupts highway cruising. Designed for the N54 and N55 engines, it integrates seamlessly with both stock and aftermarket downpipes. Featuring twin 2.5” mandrel-bent pipes and turbo-style mufflers, this exhaust offers increased flow, weight savings, and a deep, exhilarating tone that complements the BMW’s high-output turbocharged engine.
Why Upgrade?
Better Sound and Flow: A dual 2.5” mid-pipe setup leads back to lightweight, turbo-style mufflers. Designed for unrestricted flow, the exhaust enhances horsepower, torque, and throttle response. Signature Tips: Complete with dual black chrome 3.5” tips, this system not only sounds incredible but looks the part, too. Weight Savings: Shedding 37% of the weight, this exhaust replaces the heavy factory cat-back and lightens your load to support a sportier feel. Improved Performance: Reduced backpressure for smoother, more responsive acceleration. Precision Engineering
Design Technology: Using FARO ARM laser scanning and SolidWorks 3D CAD, this system is built for an exact fit. High-Quality Materials: T304 stainless steel construction with 1.25mm wall thickness, TIG-welded for durability. OEM Fitment: Stainless steel hangers are welded in OE locations for a seamless, factory-quality installation. Adjustability: Strategic slip joints make adjustments easy, so you achieve the ideal alignment for your setup. What’s Included?
Dual 2.5” mid-pipes and rear exhaust section High-flow turbo-style mufflers Complete mounting hardware and clamps Black chrome 3.5” exhaust tips Turner Motorsport Performance Ignition Coils
Boosted Performance: Enhanced spark energy translates to a stronger and more reliable combustion cycle. Direct Fitment: Engineered for seamless installation with your BMW’s ignition system. Distinctive Turner Blue: Adds a stylish touch to your engine bay, making it look as good as it performs. Benefits at a Glance
Enhanced Exhaust Sound: Deeper, more aggressive note with minimized cabin drone. Lighter Build: 37% lighter than stock for added agility. Free Ignition Coils: Improved spark for consistent performance and fuel efficiency. Performance Ready: Fully compatible with both OEM and aftermarket setups. Turn heads, enjoy the ride, and make the most out of your BMW’s power with this ECS Tuning N54/N55 Cat-Back Exhaust and Turner Ignition Coil combo—built for enthusiasts who demand the best in performance and style.
N55 Performance Cat-Back Exhaust - E82/E88 135:
Lightweight cat-back featuring an exotic exhaust note. Designed for the perfect blend of performance and functionality!
Prepare to give your 1 series the boost it deserves. This cat-back exhaust was made to redefine the driving experience of your 135. Manufactured from premium brushed stainless steel, it is not just about reducing weight; it's about enhancing performance with unrestricted airflow. And the sound? It's a symphony of power and precision, carefully crafted for an unforgettable soundtrack. The sound experience is more than you could ask for. With the freedom of exhaust- flow and tuned exhaust note, we are very excited to get these exhausts on 135's everywhere, don't wait!
Featured on the ECS Tuning YouTube Channel! - CLICK HERE FOR SOUND CLIPS! -
When crafting the ECS exhaust systems, their primary focus is on achieving the perfect balance of sound and comfort. ECS's understand the desire for a thrilling exhaust note without the annoyance of highway drone or interior vibrations. The exhaust for your 135 incorporates this balance, offering a strageic blend of sportiness and practicality. Drawing from their extensive experience, particularly with N55 cars like the E9x series, they have engineered an exhaust packed with innovative features, compatible with both factory and aftermarket downpipes. Experience the perfect blend of performance and everyday usability.
There is something about a cat-back exhaust that is just so good. Being able to unbolt and replace the entire visible exhaust gives you butterflies in your stomach. A fresh new exhaust and just knowing that things are about to get rowdy. This exhaust features twin 2.5" brushed pipes with flanges that bolt directly to your factory and aftermarket down-pipes. The dual 2.5" mid-pipes make their way toward the rear axle and converge into a single 3" exhaust section. The 3" exhaust section snakes through the rear section of the car making smooth dips and curves to make its way into a light-weight 3" turbo style muffler. Don't be fooled by the 135 muffler, the size is nothing but deceiving. The turbo-style muffler features an inner design that refines the exhaust note to perfection. An extraordinary mixture of both tone and volume. Paired with the 3" muffler is your choice of 3.5" exhaust tips that give your rear diffuser a sporty look that shouts performance.
Although both N54 and N55 share identical exhaust geometry, the N55 mid-pipes do not feature secondaries. Though the N55 cat-back is compatible with N54 downpipes this is not suggested. Supposedly this N55 catback sounds absolutely glorious on an N54, even with aftermarket downpipes.
Features and Benefits:
Street/Motorsport inspiration
Enhanced exhaust note
Full exhaust replacement
25% lighter than stock!
Stock cat-back: 56lbs
ECS cat-back: 42lbs
Reduction in back pressure for increased throttle response, TQ, and HP
Dual 3.5" fitted exhaust tips
Part Design:
In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged, and TIG-welded throughout
Dual 2.5" Stainless Steel Mandrel Bent Tubing
T304 Stainless Steel 12mm barbed exhaust hangers TIG-Welded in OE locations for precise fitment.
Strategically placed slip joints provide the most adjustability to obtain perfect fitment
Kit Contents:
Dual 2.5" mid-pipes
3" Rear exhaust section
3.0" free-flowing muffler section for better sound, and performance
Clamps and Hardware for an OEM+ install
Optional 3.5" ECS exhaust tips
Textured Black Rear Diffuser - E82/E88 M-Sport:
Presenting the ECS rear diffuser tailored exclusively for your 1 Series – a fusion of both aftermarket and factory styling. Rarely does one find a design that not only encapsulates every curve and contour of a vehicle but elevates its overall aesthetic with a single, impactful addition. Amongst the limited options available for the 1 Series, the engineers at ECS have risen to the challenge of providing aftermarket support for these perfectly sized vehicles.
The diffuser replaces the mundane factory M Sport diffuser with a perfectly fitting alternative, designed to enhance the rear end of the 1 Series. Using the existing factory hardware and tab mounting locations, a transformation is merely a few screws and a plastic trim tool away. During the prototype phase, an impressive fit and finish were achieved, but their commitment to excellence led them to make further refinements. With the updated design, the ECS diffuser is now polished to perfection, an indication of the craftsmanship invested in each product.
Installation is a breeze, requiring no drilling, cutting, or modifications of any kind. Simply remove the current valance, align the tabs, and effortlessly secure the diffuser in place using the factory mounting locations and hardware. Ensure a snug fit by verifying the alignment of all tabs, and with a gentle press, witness the tabs seamlessly click into position.
For those with a 1 Series, anticipate a wave of excitement as a range of exhaust options tailored to all motor variants, including the N52, N54, and N55, are unveiled.
Features and advantages:
Transformative
Enhances the rear aesthetic of the 1 Series
Direct fit utilizing factory clip locations and hardware
Available in Textured Matte Black and Gloss Black
Crafted from lightweight, vacuum-formed UV-stabilized gloss black ABS polymer
Compatible with both E82 and E88 models equipped with the M-Sport Package
This product was last offered at the strikethrough price on
05-05-2026
This product was last offered at the strikethrough price on
05-05-2026
Enhance your BMW's performance and sound with the Turner Motorsport N54 Valved Catback Exhaust. This exhaust system delivers a dual-purpose experience, offering a subdued note with the muffler valves closed, maintaining a near-factory sound. Open the valves with the included controller, and unleash a menacing growl, transforming your driving experience. Crafted with mandrel-bent dual 2.5" 304SS pipes and a high-flow valved stainless steel muffler, this system is a bolt-on replacement for the OE version, ensuring easy fitment with Accuseal slip-fit joints. Elevate your 335i's exhaust with the Turner Motorsport E9X 335i full exhaust system, available as Axle Back, Cat-back, or Turbo back.
This product was last offered at the strikethrough price on
09-18-2026
This product was last offered at the strikethrough price on
09-18-2026
This product was last offered at the strikethrough price on
05-02-2026
E46 M3 Performance Valved Cat-Back Exhaust:
The wait is finally over, if you have been driving your E46 M3 around with a stock exhaust or are looking for your final exhaust setup we have you covered! Welcome to the world of ingenious designed exhausts that can meet your every driving need. Our new E46 M3 catback Exhaust is a stunning example of both engineering and art with sounds to please your ears and a sight to remember. Our catback is a lightweight and free-flowing exhaust that features two independent valved mufflers and a brilliant mounting system that is a pleasure to install and easy to perfectly dial in the exhaust fitment. Weighing 19lbs or less than your factory exhaust, featuring mufflers specifically designed for the S54 this exhaust is able to provide two completely different driving experiences.
With the exhaust valves closed the refined driving experience will blow your mind; while daily driving with closed valves there is a perfect bump in volume over the factory exhaust which allows you to hear and feel your rpms with a smooth exhaust note that shows your true passion for your iconic vehicle.
Now on to the real action, what you have always wanted but never wanted to commit to. Some days you just want to put the pedal to the floor with unlimited amounts of exhaust volume with your high revving 6 cylinder. Here is your opportunity to unleash the pure sound of your S54 while having the choice to change back to a respectable volumed exhaust. With the valves open this exhaust is an absolute symphony. Starting off from a stop with the valves open there is a significant increase in volume over the valves closed. When entering in to the 2000 rpm range you begin to experience the slightest taste of how satisfying the exhaust is going to sound. As you approach 4,000 rpms and higher you now have started to open up the can of worms, you can feel the free-flowing path of the exhaust with limited to no resistance, far superior to the factory exhaust. Anything after 6500 rpms is an absolute statement of exhaust. Over 6500 rpm is a sonorous note that lives rent free in the enthusiasts mind that can make a believer out of anyone who doubted the capable E46 M3. Once you are done having your fun and have experienced your S54 more than you ever have all you do is make one button click on your valve controller and you are back to high class and refinement. Truly the best of both worlds and a school girl giggling experience anytime you want.
Featured on the ECS YouTube Channel - CLICK HERE FOR SOUND CLIPS!
Features and Benefits:
19lbs or more weight savings from your factory exhaust
In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
Retains factory emissions
Compatible with factory headers/front sections
Compatible with aftermarket headers/front sections that mate up to the factory rear section
Utilizes factory exhaust hangers
Adjustable fabricated sheet metal muffler brackets
Integrated x-pipe for improved exhaust note
Mandrel-bent dual 2.5" 304SS pipe
High flow dual valved, stainless steel mufflers
Vacuum actuated valves
Accuseal slip fit joints
All muffler exits are used for valves open and closed
2.5” Muffler exits for a variety of 3.5" tip options
Kit Contents:
E46 M3 mid section with integrated X-Pipe
Dual Turner S54 valved mufflers
Dual valve actuators and 2 remote key fobs
Exhaust Gaskets and Hardware
New center exhaust hangers
Optional Turner 3.5" Brushed or Chrome tips
Optional muffler hanger removal pliers
- Click HERE for Installation Instructions -
PRODUCT DEVELOPMENT:
Our Turner E46 Valved Catback was designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.
E46 M3 Euro Style Carbon Front Lip:
Our unique and carefully designed front lip for the E46 M3 focuses on enhancing the car's aesthetics while preserving its natural beauty. This front lip is constructed of high-gloss, 3mm thick, 2x2 carbon fiber that adds a tasteful accent to the bumper while being strong and lightweight!
This aesthetic piece was crafted to stand out from other options available on the market by incorporating design elements that draw inspiration from the stock bumper but reimagines them in a way that sets it apart. Rather than overcomplicating the car's body styling, the goal was to seamlessly integrate the front lip with the existing design. This approach aims to enhance the car's body styling rather than overshadow it.
This versatile design is suited for both track use and everyday driving on the streets. Our E46 M3 front lip was designed to strike a balance between uniqueness and performance oriented aesthetics, while complementing the car's existing design. This is a clear cut choice front lip for someone looking to enhance the look of their M3.
Once you see your M3 with this front lip from, you will no longer think the front end is complete without it. Rounding out the near perfect car, this front lip completes the front end by filling out the open space underneath and sets the stage to enjoy the timeless body styling incorporating a curvature that compliments the front bumper.
Features & Benefits:
High-Gloss
Beautiful flowing carbon weave
Strong and lightweight
Updates the bumper with carbon appearance that enhances the existing body lines
Motorsport styling
Enhanced lowered appearance
Design:
CAD designed in-house for precision fitment
3mm 2x2 carbon fiber shell securely mounted at strong mounting points along the whole surface where the lip mates to the bumper
Front leading edge helps compliment and accentuate the forgotten body lines to add an aggressive yet subtle flare to the front end
Attaches to the front bumper with self tapping screws, plastic riv-nut and 6mm 3m adhesive tape to securely mount
Installation hardware included
Installation:
Mounts to the bumper using factory hardware combined with self tapping screws, plastic specific rivnut and hardware for securing the center posts. Requires drilling the underside of the bumper. Riv-nut installation tool included.
Turner Motorsport Performance Ignition Coils with Your Purchase!
Get more power, sound, and reliability with this exclusive Doorbuster offer: a complimentary set of Turner Motorsport Performance Ignition Coils when you purchase the F87 M2 N55 Race-Inspired Catback Exhaust System! Experience dynamic sound, performance, and efficiency by upgrading your ignition and exhaust systems together.
F87 M2 N55 Race-Inspired Catback Exhaust System
Ready to transform your N55-powered M2 into a track-inspired machine? The Turner Motorsport Catback Exhaust delivers a lightweight, high-flow design that enhances both power and exhaust tone. Unleash a bold, aggressive sound that matches the intensity of your M2, revealing the full sonic and performance potential of the twin-scroll turbo N55 engine.
BMW enthusiasts know the thrill of owning an M2 with the N55, but the stock exhaust system can mute its character, especially as it warms up. The Turner Catback exhaust brings this engine to life with unrestricted flow and minimized weight, making every throttle response feel sharper, and every acceleration, thrilling. Perfect for the driver who wants the raw, unfiltered power of the N55 without the cost premium of the M2 Competition model.
Engineered for Power and Flow
Turner’s engineers crafted this catback exhaust to minimize weight and maximize airflow, using a true 3.0-inch stainless steel front section and straight-through rear piping. By removing factory restrictions, they’ve created an exhaust system that significantly improves performance, reduces back pressure, and delivers a sport-tuned sound that’s equally exhilarating on the track and the road. Weighing just 28 lbs, it offers a significant 27 lb reduction over the OEM exhaust, amplifying your M2's agility and responsiveness.
Sound Optimization: The N55 comes alive with this race-inspired exhaust, delivering a fierce tone that announces your arrival. Explore sound clips on the ECS Tuning YouTube Channel. High-Quality Materials: Constructed from T304 stainless steel, this exhaust is TIG-welded for enhanced durability, while the slip joints and precision mandrel bends ensure an exact fitment. Performance-Built: The quad 4.0-inch brushed exhaust tips complete the aggressive look while helping to enhance airflow, resulting in improved horsepower and torque. Features and Benefits
Motorsports-inspired exhaust tone 27 lb weight reduction for enhanced performance Free-flow design reduces back pressure for optimal torque and power gains Quad exit tips with a striking brushed finish Straightforward bolt-on installation with OEM mounting points Kit Includes
3.0" front section, direct fit to factory downpipe Lightweight midsection for better flow and sound "Race Inspired" rear exhaust section Quad 4.0" brushed exhaust tips Necessary clamps and hardware for seamless installation Optional Exhaust Pipe Hanger Removal Pliers Turner Motorsport Performance Ignition Coils
For top-tier spark and efficiency, the Turner Performance Ignition Coils deliver! Boosting energy output, these ignition coils provide a consistent, efficient spark, maximizing fuel burn and optimizing performance. Engineered with Turner’s signature blue housing, they look as good as they perform.
Features and Benefits
Enhanced ignition performance Perfect fitment for N55 engines Signature Turner Blue finish for a distinctive engine bay upgrade
Turner Motorsport Valved Cat-Back Exhaust + ECS Luft-Technik Intake System for E46 325i
Upgrade your E46 with Turner Motorsport's premium Valved Cat-Back Exhaust and enjoy a ECS Luft-Technik Intake System—transforming both sound and performance!
TURNER E46 325i VALVED CAT-BACK EXHAUST When you're choosing an exhaust, you shouldn’t have to compromise between spirited performance and neighborhood-friendly volume. The Turner Valved Cat-Back Exhaust delivers the best of both worlds: tame when you want it, rowdy when you don’t! Lightweight, performance-driven, and specifically designed for your E46, this exhaust offers instant control over your car’s sound and power output.
With a simple press of a button, the exhaust valves adjust to match your mood or driving environment. Keep them closed for a deep, resonant tone or open them wide for full-throttle power and exhilarating sound. Engineered to withstand high performance and everyday driving, this exhaust will elevate your BMW experience.
Key Features: Dual 2.5" Stainless Steel Mid-Pipes: Smooth airflow for reduced back pressure, connecting seamlessly to factory downpipes. Integrated X-Pipe: Reduces back pressure and improves exhaust tone. Full 3" Valved Muffler: Delivers aggressive sound when open; quiet and refined when closed. Integrated 3" Tips: Perfectly fill the rear diffuser with a polished finish. Lightweight Design: 23 lb weight reduction over factory exhaust. Complete Kit Includes: 2.5" Mid-section with X-pipe integration 3" Valved Muffler and integrated tips Exhaust valve control kit with two remote key fobs Gaskets, clamps, and complete mounting hardware Installation instructions available in the installation tab. ECS E46 325 LUFT-TECHNIK INTAKE SYSTEM Take your driving experience up a notch with the ECS Luft-Technik Intake System! Designed to increase airflow and unlock captivating induction sounds, this intake system frees your engine from the restrictive stock intake box. Enjoy a noticeable boost in both performance and sound.
Benefits: Significant Airflow Increase: 71 CFM gain over stock (27% increase). Enhanced Induction Noise: Adds a sporty, satisfying sound. Seamless Factory Integration: Retains stock MAF location and mounts to existing air induction track. Premium Design: Wrinkle-Black Powder Coated Aluminum Tubing: Engineered from durable 6061 and 5052 aluminum. 7” Oiled Cotton Gauze Filter: Red filter maximizes air intake. Silicone Inlet Boot: Replaces failure-prone factory intake boot, providing smoother airflow and greater durability. Complete Kit Includes: 7” Oiled Filter (Red) Silicone Inlet Boot with improved flow characteristics Aluminum MAF Flange Mounting brackets, clamps, and all necessary hardware Turner Motorsport and ECS Tuning developed these products with precision, using FARO ARM laser scanning technology and CAD modeling for perfect fitment. Elevate your E46 with this exclusive package, and experience a total transformation in performance and sound!
This product was last offered at the strikethrough price on
05-05-2026
This product was last offered at the strikethrough price on
05-05-2026
F87 M2 N55 Race-Inspired Catback Exhaust System
Ready to transform your N55-powered M2 into a track-inspired machine? The Turner Motorsport Catback Exhaust delivers a lightweight, high-flow design that enhances both power and exhaust tone. Unleash a bold, aggressive sound that matches the intensity of your M2, revealing the full sonic and performance potential of the twin-scroll turbo N55 engine.
BMW enthusiasts know the thrill of owning an M2 with the N55, but the stock exhaust system can mute its character, especially as it warms up. The Turner Catback exhaust brings this engine to life with unrestricted flow and minimized weight, making every throttle response feel sharper, and every acceleration, thrilling. Perfect for the driver who wants the raw, unfiltered power of the N55 without the cost premium of the M2 Competition model.
Engineered for Power and Flow
Turner’s engineers crafted this catback exhaust to minimize weight and maximize airflow, using a true 3.0-inch stainless steel front section and straight-through rear piping. By removing factory restrictions, they’ve created an exhaust system that significantly improves performance, reduces back pressure, and delivers a sport-tuned sound that’s equally exhilarating on the track and the road. Weighing just 28 lbs, it offers a significant 27 lb reduction over the OEM exhaust, amplifying your M2's agility and responsiveness.
Sound Optimization: The N55 comes alive with this race-inspired exhaust, delivering a fierce tone that announces your arrival. Explore sound clips on the ECS Tuning YouTube Channel. High-Quality Materials: Constructed from T304 stainless steel, this exhaust is TIG-welded for enhanced durability, while the slip joints and precision mandrel bends ensure an exact fitment. Performance-Built: The quad 4.0-inch brushed exhaust tips complete the aggressive look while helping to enhance airflow, resulting in improved horsepower and torque. Features and Benefits
Motorsports-inspired exhaust tone 27 lb weight reduction for enhanced performance Free-flow design reduces back pressure for optimal torque and power gains Quad exit tips with a striking brushed finish Straightforward bolt-on installation with OEM mounting points Kit Includes
3.0" front section, direct fit to factory downpipe Lightweight midsection for better flow and sound "Race Inspired" rear exhaust section Quad 4.0" brushed exhaust tips Necessary clamps and hardware for seamless installation Optional Exhaust Pipe Hanger Removal Pliers Turner Motorsport Performance Ignition Coils
For top-tier spark and efficiency, the Turner Performance Ignition Coils deliver! Boosting energy output, these ignition coils provide a consistent, efficient spark, maximizing fuel burn and optimizing performance. Engineered with Turner’s signature blue housing, they look as good as they perform.
Features and Benefits
Enhanced ignition performance Perfect fitment for N55 engines Signature Turner Blue finish for a distinctive engine bay upgrade
This product was last offered at the strikethrough price on
09-18-2026
This product was last offered at the strikethrough price on
09-18-2026
This product was last offered at the strikethrough price on
09-18-2026
This product was last offered at the strikethrough price on
09-18-2026
This product was last offered at the strikethrough price on
09-18-2026
This product was last offered at the strikethrough price on
09-18-2026
This product was last offered at the strikethrough price on
09-18-2026
This product was last offered at the strikethrough price on
09-18-2026
This product was last offered at the strikethrough price on
09-18-2026
This product was last offered at the strikethrough price on
09-18-2026
This product was last offered at the strikethrough price on
09-18-2026
This product was last offered at the strikethrough price on
09-18-2026
This product was last offered at the strikethrough price on
09-18-2026
This product was last offered at the strikethrough price on
09-18-2026
This product was last offered at the strikethrough price on
09-18-2026
This product was last offered at the strikethrough price on
09-18-2026
MINI R53 Cat-Back Exhaust System - Non Resonated - Black Tips is designed to enhance both performance and sound for the MINI R53. Crafted by Milltek, this exhaust system features 2.50" T304 stainless steel construction and dual 76.2mm black JCW-style tips, delivering a striking appearance and aggressive exhaust note.
With over 32 years of expertise in designing and manufacturing performance exhausts, Milltek's MINI R53 Cat-Back Exhaust System is engineered to meet the highest standards of quality and performance. Backed by a lifetime warranty for the original purchaser, this exhaust system offers both style and reliability.
MINI R56 Stainless Steel Cat-Back Exhaust delivers enhanced performance and an aggressive exhaust note tailored for street use. The Borla Sport system is designed as a simple slip-on upgrade with a tuned resonator and rear muffler package, offering significant improvements in power and sound without being overly loud.
Engineered specifically for turbocharged engines, this system increases flow capacity, resulting in better boost response, a broader powerband, and an impressive gain of +12hp. Additionally, it provides a weight reduction compared to the bulky stock exhaust, contributing to overall vehicle performance.
Constructed from 304 stainless steel, both inside and out, this exhaust system is built to last. Unlike other systems that may use inferior materials, Borla's 304 stainless construction ensures durability and resistance to rust and deterioration. Backed by Borla's 1,000,000-mile warranty, this exhaust system offers long-lasting quality and performance.
This product was last offered at the strikethrough price on
09-18-2026
This product was last offered at the strikethrough price on
09-18-2026
MINI R53 Cat-Back Exhaust System - Non Resonated - Polished Tips offers a high-performance upgrade for your MINI R53. This exhaust system is designed to enhance both the sound and aesthetics of your vehicle, featuring high-quality materials and a sleek finish.
This product was last offered at the strikethrough price on
09-18-2026
This product was last offered at the strikethrough price on
09-18-2026
This product was last offered at the strikethrough price on
09-18-2026
This product was last offered at the strikethrough price on
09-18-2026
This product was last offered at the strikethrough price on
09-18-2026
This product was last offered at the strikethrough price on
09-18-2026
This product was last offered at the strikethrough price on
09-18-2026
This product was last offered at the strikethrough price on
09-18-2026
This product was last offered at the strikethrough price on
09-18-2026
This product was last offered at the strikethrough price on
09-18-2026
This product was last offered at the strikethrough price on
09-18-2026
This product was last offered at the strikethrough price on
09-18-2026