BMW Fuel System Parts

This is a complete plug and play solution to replace your stock Low-Pressure Fuel Pump (LPFP) with a new E85 certified bucketless assembly.

This solution provides up to 25% more flow than our standard Stage 2 LPFP upgrade and up to 150% more flow than the stock pump.  

This pump will support up to 550whp running 85% ethanol and 600whp running 50% ethanol. 

The Stage 2 bucketless kit includes the following:

• • A custom anodized billet fitting for the pump output and stock fuel line connection.
  • Our custom billet aluminum anodized bracket for the pump and float assembly
  • Two cotter pins to secure your float assembly
  • A new E85 compatible Walbro 450 pump
  • Spare vent tube clip
  • A new Walbro filter

If you still need more flow, the Stage 3 upgrade is also available and can be added to your Stage 2 bucketless pump.

The Stage 3 upgrade kit includes:

• • A complete plug and play solution by simply adding the secondary module
  • Our custom billet aluminum fitting to run both pumps in parallel
  • A new E85 compatible Walbro 450 pump
  • Wiring harness for the secondary pump
  • Spare vent tube clip
  • A new Walbro filter

• Recommended accessories:
  • Lock Ring Removal Tool
  • Hobb's switch 
     
• NOTE: These kits include a basic filter assembly.  When using this filter, running the vehicle under low fuel conditions can cause fuel starvation issues. If you do hard straight line accelerations when you have less than 1/8 tank of fuel, we would recommend running our standard Stage 2, 3, or Stage 4 pump.  In addition, if you intend to use this for road course applications, you may see starvation issues when running less than a half tank and doing long high G right turns.  Again for those applications we'd recommend one of our standard pump applications.

BMW M60 4.0L Fuel Pump - In-Tank Suction Device is designed to enhance fuel delivery for BMW E32 and E34 models equipped with the M60 V8 engine. This high-quality fuel pump comes with a strainer and a large diameter shock-absorbing ring, ensuring reliable performance and longevity.

• Perfect Fit: Compatible with 1993-1995 E34 BMW 530i and 540i, as well as 1983-1994 E32 BMW 740i and 740il models.
• Enhanced Performance: Ensures consistent fuel delivery with the included strainer for clean fuel flow.
• Durable Design: Features a large diameter shock-absorbing ring to minimize vibration and enhance reliability.
• Direct Replacement: Designed to replace the factory fuel pump without modification.
• High Quality: Manufactured to meet or exceed OEM standards for dependable performance.

Upgrade your BMW’s fuel system with the BMW M60 4.0L Fuel Pump - In-Tank Suction Device for optimal engine efficiency and reliability.

Upgrade your Mini's fuel delivery system with the Genuine MINI Fuel Pump Supply Module 16117300477. Engineered for precision and reliability, this genuine MINI component ensures optimal fuel supply to your Mini's engine, enhancing performance and efficiency.

• Genuine MINI product guarantees compatibility and reliability
• Ensures optimal fuel delivery for improved engine performance
• Precision engineering for long-lasting durability
• Enhances fuel efficiency and engine responsiveness

This OEM Bosch in-tank fuel pump includes the pump and inlet strainer. This can be replaced easily by accessing the top of the fuel tank beneath the rear seat, no need to drop the fuel tank.

This part does not include the fuel level sensor. The fuel level sensor can be reused from the original fuel pump or a new sensor can be purchased under T#392738.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Upgrade your BMW's fueling system with the CAN Ethanol Content Analyzer from Turner Motorsport. This analyzer reads data from the E85 sensor and converts it to CAN format, enabling the DME to make accurate fueling decisions based on E85 content. Utilizing this analyzer alongside MHD or ECUTEK tunes allows you to activate a FlexFuel-like feature, optimizing performance and efficiency. Protect your engine from potential damage by ensuring your tune supports the FlexFuel feature for the E85 blend you're using.

Plug and play installation, no manual wiring or plumbing required

High-quality hoses tested with 10 bars of static pressure (145 Psi)

Each unit undergoes testing before leaving the manufacturer

Compatible with MHD, BM3, or ECUTEK tuning solutions

Works with any High Pressure Fuel Pump

Upgrade your BMW's fueling system with the CAN Ethanol Content Analyzer from Turner Motorsport. This analyzer reads data from the E85 sensor and converts it to CAN format, enabling the DME to make accurate fueling decisions based on E85 content. Utilizing this analyzer alongside MHD or ECUTEK tunes allows you to activate a FlexFuel-like feature, optimizing performance and efficiency. Protect your engine from potential damage by ensuring your tune supports the FlexFuel feature for the E85 blend you're using.

Plug and play installation, no manual wiring or plumbing required

High-quality hoses tested with 10 bars of static pressure (145 Psi)

Each unit undergoes testing before leaving the manufacturer

Compatible with MHD or ECUTEK tuning solutions

Works with the stock or TU High-Pressure Fuel Pump

A90 MKV B58 Supra Fuel-It! Flex Fuel Kit is the ultimate upgrade for monitoring and managing your Toyota Supra’s ethanol content in real-time. This complete kit, offered by Turner Motorsport, allows you to know your exact ethanol content through the Fuel-It! or JB4 mobile app on your smartphone or tablet. It’s perfect for those looking to maximize performance by running ethanol blends, providing you with precise data to make informed decisions.

This kit includes everything you need for installation, featuring a genuine Continental® ethanol sensor, stainless steel braided fuel lines with black nylon sheathing, a Fuel-It! Bluetooth analyzer, and a plug-and-play harness. It also supports both Bluetooth App and 5v analog output for JB4 or flash tuning.

• Real-Time Monitoring: Instantly view ethanol content on your smartphone or tablet via the Fuel-It! or JB4 app.
• Comprehensive Kit: Includes a genuine Continental® ethanol sensor, Fuel-It! Bluetooth analyzer, and more.
• Durable Construction: Stainless steel braided fuel lines with black nylon sheathing protect engine bay components.
• Plug-and-Play Installation: Simplified installation with a plug-and-play harness.
• Bluetooth and Analog Output: Supports both Bluetooth connectivity and 5v analog output for JB4 or flash tuning.
• Optimized Performance: Perfect for those looking to maximize power by running ethanol blends.