Find Parts That Fit Your Vehicle

KW Suspension BMW Coilovers

Coilovers provide more adjustability than a strut and spring setup and can serve a variety of different needs - it's important to be sure of what your suspension goals are. We have broken down our coilover catalog into street and track categories, this is not to say you can't use one of our aEURoestreetaEUR coilovers on the track, or vice versa, but it is to give you a starting point. Are you someone who is interested in getting your BMW lower than factory height for the aesthetic value and handling benefits in a daily driver? Check out our street category. The majority of these are priced to avoid breaking the bank, but providing a good value in terms of features and benefits. On the other hand, if you are putting together your vehicle with the track as its main purpose, take a look at our track coilovers category. We have hand selected these coilover brands as being more expensive coilovers built to hold up to abuse.

Sub-Categories

Sort By:

KW Suspension - Corporate Logo
T#:50766807
Part#: 352200ER
Back Ordered
$ 4,094.00 USD
Free Shipping
$ 4,094.00 USD
Free Shipping
The KW V3 is the ultimate suspension solution for the M4 Competition xDrive Convertible.
KW Suspension - Corporate Logo
T#:36269423
Part#: 180200AT
Back Ordered
$ 2,334.00 USD
Free Shipping
$ 2,334.00 USD
Free Shipping
KW Suspension - Corporate Logo
T#:338378
Part#: TMS338378
Back Ordered
Starting at $ 2,684.00 USD
Free Shipping
Starting at $ 2,684.00 USD
Free Shipping
Adjustable Rebound & Compression Damping

Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -
  • Separate adjustments for compression (14 positions) and rebound (infinite settings),
  • Stiffer springs over stock for less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-50mm lowering; Rear = 30-55mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control!

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!




    This item fits the following BMWs:
    2012+ F30 BMW 320i xDrive 328i xDrive- Sedan
    2013+ F32 BMW 428i xDrive- Coupe
  • Show More Show Less

    KW Suspension - Corporate Logo
    T#:396823
    Part#: 352200BU
    Back Ordered
    $ 3,584.00 USD
    Free Shipping
    $ 3,584.00 USD
    Free Shipping

    Adjustable Rebound & Compression Damping 

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features - 

    • Separate adjustments for compression (14 positions) and rebound (infinite settings),
    • Stiffer springs over stock for less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 25-55mm lowering; Rear = 20-50mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability, 

    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control! 

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. 
    Cars with EDC will require the EDC Cancellation Kit (not currently available). Cars without EDC do not need any extra materials. 

    Lifetime warranty! 

    This item fits the following BMWs:
    2017+ G30 BMW 540i 530i

    Show More Show Less

    KW Suspension - Corporate Logo
    T#:50731701
    Part#: 10220012-B
    Back Ordered
    $ 1,814.00 USD
    Free Shipping
    $ 1,814.00 USD
    Free Shipping
    Upgrade the stance and ride quality of your E36
    KW Suspension - Corporate Logo
    T#:590905
    Part#: 1022000Q
    Ships in 4 Business Days
    $ 2,094.00 USD
    $ 2,094.00 USD
    Factory Pre-set Damping

    The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -
  • Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 30-55mm lowering; Rear = 20-50mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    This is the ideal coil over kit for a BMW owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!




    This item fits the following BMWs:
    2008+
  • Show More Show Less

    KW Suspension - Corporate Logo
    T#:11599
    Part#: 15220033
    Back Ordered
    $ 2,594.00 USD
    Free Shipping
    $ 2,594.00 USD
    Free Shipping

    Adjustable Rebound Damping

    The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including -

    • Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 30-60mm lowering; Rear = 20-50mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,

    This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!

    This item fits the following BMWs:
    2007-2012 E91 BMW 328i - Wagon
    2007-2013 E93 BMW 328i 335i - Convertible

     

    Show More Show Less
    KW Suspension - Corporate Logo
    T#:50826640
    Part#: 35220029-B
    Back Ordered
    $ 3,254.00 USD
    Free Shipping
    $ 3,254.00 USD
    Free Shipping
    The KW V3 is the premier suspension solution for the 1995–2001 BMW 7 Series.

    KW Suspension - Corporate Logo
    T#:12643102
    Part#: 352200CE
    Back Ordered
    $ 4,194.00 USD
    Free Shipping
    $ 4,194.00 USD
    Free Shipping
    The KW V3 coilovers offer a track worthy package for the street with its dual dampening technology. The separate and independently adjustable rebound and compression dampening allows for the end user to fine tune their suspension setup for the ultimate in handling. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed. This kit includes and will give you: Front Lowering:0.4" to 1.4" Rear Lowering:0.4" to 1.4" Damping technology with individually adjustable rebound- and compression technology Stainless Steel "Inox-Technology" Lowering range approved by the TüV High-quality components for long durability Infinitely variable rebound damping adjustment 14-way adjustable compression damping Unique, individually working damping force adjustment Comprehensive documentation for easy use KW was founded in 1995 and at the beginning it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test.
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:50766810
    Part#: 352200DW
    Back Ordered
    $ 3,784.00 USD
    Free Shipping
    $ 3,784.00 USD
    Free Shipping
    Designed for enthusiasts who want total command over their vehicle’s dynamics.
    KW Suspension - Corporate Logo
    T#:338268
    Part#: TMS338268
    Back Ordered
    Starting at $ 2,594.00 USD
    Starting at $ 2,594.00 USD
    Adjustable Rebound Damping

    The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including -
  • Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-50mm lowering; Rear = 30-55mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!




    This item fits the following BMWs:
    2012+ F30 BMW 320i xDrive 328i xDrive - Sedan
    2013+ F32 BMW 428i xDrive- Coupe
  • Show More Show Less
    KW Suspension - Corporate Logo
    T#:50731722
    Part#: 102200EW
    Back Ordered
    $ 2,184.00 USD
    Free Shipping
    $ 2,184.00 USD
    Free Shipping
    Delivers a pre-set damping profile that perfectly bridges the gap between aggressive driving and everyday comfort.


    KW Suspension - Corporate Logo
    T#:206107
    Part#: 1022000H
    Back Ordered
    $ 2,094.00 USD
    Free Shipping
    $ 2,094.00 USD
    Free Shipping
    Factory Pre-set Damping

    The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -
  • Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-50mm lowering; Rear = 30-55mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    This is the ideal coil over kit for a F33 owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
    Cars with the factory EDC electronic adjustable shocks must have the system disabled with the optional KW EDC Cancellation Kit (or similar). This is a direct fit for cars without EDC.

    Lifetime warranty!




    These KW Variant 1 coil overs fit the following BMWs:
    2013+ F33 BMW 428i Convertible
    2014+ F36 BMW 428i Gran Coupe
  • Show More Show Less
    KW Suspension - Corporate Logo
    T#:341733
    Part#: 1802000E
    Back Ordered
    $ 2,764.00 USD
    Free Shipping
    $ 2,764.00 USD
    Free Shipping
    KW Suspension - Corporate Logo
    T#:361413
    Part#: 15220039
    Back Ordered
    $ 2,594.00 USD
    Free Shipping
    $ 2,594.00 USD
    Free Shipping

    Adjustable Rebound Damping 

    The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including -

    • Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 35-65mm lowering; Rear = 35-55mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,

    This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride. 

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. 

    Lifetime warranty! 

    FREE FEDEX GROUND SHIPPING!
    FREE FEDEX GROUND shipping within the 48 contiguous states. 

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i Coupe

    Show More Show Less

    KW Suspension - Corporate Logo
    T#:396822
    Part#: 352200BN
    Back Ordered
    $ 3,294.00 USD
    Free Shipping
    $ 3,294.00 USD
    Free Shipping

    Adjustable Rebound & Compression Damping 

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features - 

    • Separate adjustments for compression (14 positions) and rebound (infinite settings),
    • Stiffer springs over stock for less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 25-55mm lowering; Rear = 20-50mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability, 

    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control! 

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. 
    Cars with EDC will require the EDC Cancellation Kit (not currently available). Cars without EDC do not need any extra materials. 

    Lifetime warranty! 

    This item fits the following BMWs: 
    2016+ F48 BMW X1 s/xDrive28i

    Show More Show Less

    KW Suspension - Corporate Logo
    T#:180871
    Part#: 35220100
    Back Ordered
    $ 4,154.00 USD
    Free Shipping
    $ 4,154.00 USD
    Free Shipping
    Adjustable Rebound & Compression Damping Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features - Separate adjustments for compression (14 positions) and rebound (infinite settings), Stiffer springs over stock for less bodyroll than the standard suspension, Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance, Individually height-adjustable - Front = 25-55mm lowering; Rear = 20-50mm lowering, TUV approved lowering range and operation, Expert engineering and design for ease-of-use and long durability, Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control! Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. This kit is intended for cars that came with the factory EDC suspension and includes the KW EDC Cancellation Kit. Lifetime warranty! This item fits the following BMWs: 2012+ F13 BMW 640i 650i - Coupe ONLY for cars with Adaptive Drive and EDC.
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:5376312
    Part#: 180200BN
    Back Ordered
    $ 2,334.00 USD
    Free Shipping
    $ 2,334.00 USD
    Free Shipping

    KW Suspension - Corporate Logo
    T#:50830335
    Part#: 352082000G
    Back Ordered
    $ 3,644.00 USD
    Free Shipping
    $ 3,644.00 USD
    Free Shipping
    Designed for drivers who prioritize chassis stability and steering response over aggressive lowering.
    KW Suspension - Corporate Logo
    T#:361418
    Part#: 35220006
    Ships in 4 Business Days
    $ 3,584.00 USD
    Free Shipping
    $ 3,584.00 USD
    Free Shipping

    Adjustable Rebound & Compression Damping 

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -

    • Separate adjustments for compression (14 positions) and rebound (infinite settings),
    • Stiffer springs over stock for less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 10-40mm lowering; Rear = 20-50mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,

    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control! 

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. 

    Lifetime warranty! 

    FREE FEDEX GROUND SHIPPING!
    FREE FEDEX GROUND shipping within the 48 contiguous states. 

    This item fits the following BMWs:
    2004-2011 E63 BMW 645ci 650i Coupe
    2004-2011 E64 BMW 645ci 650i Convertible

    Show More Show Less

    KW Suspension - Corporate Logo
    T#:29898453
    Part#: 3A7200EQ
    Back Ordered
    $ 7,894.00 USD
    $ 7,894.00 USD

    KW Suspension - Corporate Logo
    T#:596992
    Part#: 35220091
    Back Ordered
    $ 3,784.00 USD
    Free Shipping
    $ 3,784.00 USD
    Free Shipping
    KW was founded in 1995 and at the beginning it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test.
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:343007
    Part#: 35220827TMKT
    Back Ordered
    $ 4,744.00 USD
    $ 4,744.00 USD
    The KW V3 coilovers offer a track worthy package for the street with its dual dampening technology. The separate and independently adjustable rebound and compression dampening allows for the end user to fine tune their suspension setup for the ultimate in handling.
    Show More Show Less
    KW Suspension - Corporate Logo
    T#:11669
    Part#: 35220087
    Back Ordered
    $ 3,744.00 USD
    Free Shipping
    $ 3,744.00 USD
    Free Shipping

    Adjustable Rebound & Compression Damping

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -

     

    • Separate adjustments for compression (14 positions) and rebound (infinite settings),
    • Stiffer springs over stock for less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 15-40mm lowering; Rear = 10-35mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,
    • Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control!

      Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

      Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
      Cars equipped with EDC from the factory must have the system disabled with the optional KW EDC Cancellation Kit.

      Lifetime warranty!




      This item fits the following BMWs:
      2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

     

    Show More Show Less


    KW Suspension - Corporate Logo
    T#:348855
    Part#: 35220079
    Back Ordered
    $ 4,154.00 USD
    Free Shipping
    $ 4,154.00 USD
    Free Shipping
    Adjustable Rebound & Compression Damping

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -
  • Separate adjustments for compression (14 positions) and rebound (infinite settings),
  • Stiffer springs over stock for less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 10-45mm lowering; Rear = 10-35mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control!

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
    Cars originally fitted with EDC electronically adjustable shocks require KW EDC Cancellation Kit. Select this from the menu below.

    Lifetime warranty!




    This item fits the following BMWs:
    2010+ E70 BMW X5M
    2010+ E71 BMW X6M
  • Show More Show Less
    KW Suspension - Corporate Logo
    T#:338387
    Part#: 35220080X
    Back Ordered
    Starting at $ 4,044.00 USD
    Starting at $ 4,044.00 USD

    Adjustable Rebound & Compression Damping

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -

     

    • Separate adjustments for compression (14 positions) and rebound (infinite settings),
    • Stiffer springs over stock for less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 25-55mm lowering; Rear = 20-50mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,
    • Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control!

      Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

      Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
      Cars with EDC will require the KW EDC Cancellation Kit (or similar) available from the menu below. Cars without EDC do not need any extra materials.

      Lifetime warranty!

      *Not for cars with Adaptive Drive* 


      This item fits the following BMWs:
      2011+ F10 BMw 528i 535i 550i
      2009+ F01 BMW 740i 740li 750i 750li
      Not for cars with Adaptive Drive.

     

    Show More Show Less
    KW Suspension - Corporate Logo
    T#:349020
    Part#: 10220085
    Back Ordered
    $ 2,724.00 USD
    Free Shipping
    $ 2,724.00 USD
    Free Shipping
    KW was founded in 1995 and at the beginning it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test.
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:222775
    Part#: 39020005
    Back Ordered
    $ 4,894.00 USD
    Free Shipping
    $ 4,894.00 USD
    Free Shipping
    Experience the innovation and quality of high-end engineering: the KW DDC (Dynamic Damping Control) ECU (Electronic Control Unit) coilover suspension, made in Germany. For the first time with its electronically adjustable dampers, the KW DDC ECU coilover system combines intelligent, app-controlled suspension tuning with ride height adjustability. This gives you the opportunity to upgrade your vehicle with an adaptive damper systen and electronically control the level of performance or comfort that meets your requirements Included in the package is a KW “inox-line” coilover suspension with high-quality stainless steel struts, electronically adjustable dampers, a high-performance control unit with a vehicle-specific set of cables, a KW DDC control button giving you control from the comfort of the drivers seat, and elaborate assembly instructions for an easy installation. The KW DDC ECU Coilover suspension features three vehicle-specific damper setups. At the touch of a button, you can choose between the basic Sport setting, a very sporty and performance-oriented Sport+ setup or Comfort mode. With the KW DDC button, the respective driving mode, Comfort, Sport, or Sport+ can be selected changing the adaptive KW DDC ECU coilover kit damper setting within milliseconds. In Sport+ mode, the adaptive KW dampers give every car an unadulterated driving behavior. A setup which is ideal for demanding rides on twisty roads with lots of load changes. The Sport mode, however, is perfect for driving on the highway with long curves, while the Comfort mode is the ideal for traveling on poorly developed roads. In Comfort mode, the suspension adjusts automatically to the respective driving situation. You are not buying a mass-produced, generic coilover kit, a KW coilover has been developed specifically for your particular vehicle. As a manufacturer, KW uses only its own resources, high-quality components and the damper technology that has all developed in-house. With the KW DDC coilovers, the rolling motion of the body will be reduced during compression giving you the benefit of more direct handling and confidence while driving. Height Adjustment Range: Front: 1.2 - 2.4" Rear: 1.0 - 2.2"
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:596969
    Part#: 352200BP
    Back Ordered
    $ 3,634.00 USD
    Free Shipping
    $ 3,634.00 USD
    Free Shipping

    Adjustable Rebound & Compression Damping 

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features - 

    • Separate adjustments for compression (14 positions) and rebound (infinite settings),
    • Stiffer springs over stock for less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 25-55mm lowering; Rear = 20-50mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability, 

    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control! 

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. 
    Cars with EDC will require the EDC Cancellation Kit (not currently available). Cars without EDC do not need any extra materials. 

    Lifetime warranty! 

    This item fits the following BMWs: 
    2016+ F48 BMW X1 s/xDrive28i

    Show More Show Less
    KW Suspension - Corporate Logo
    T#:367046
    Part#: 10220006
    Back Ordered
    $ 2,044.00 USD
    Free Shipping
    $ 2,044.00 USD
    Free Shipping
    KW was founded in 1995 and at the beginning it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test.
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:11678
    Part#: 35220811
    Back Ordered
    $ 4,094.00 USD
    Free Shipping
    $ 4,094.00 USD
    Free Shipping
    Adjustable Rebound & Compression Damping, Front Camber Plates & Stiffer Springs

    KW Clubsport coilovers was developed for E36 3 Series owners who demand a better handling car when participating in track day events, but also require a setup that could be used every day. The Clubsport was specifically designed for the Nordschleife using track day tires. By using the adjustable camber mounts, the suspension geometry can be adjusted to the requirements of tires and the intended use. The mentioned adjustment options combined with the independently adjustable rebound and compression damping technology allow a suspension setup according to the vehicle load, tire characteristics and different track conditions. KW Clubsport meets every demand regarding a coilover for the usage on the road and the race track.

    KW Clubsport suspension kits are independently adjustable in compression and rebound and include high performance racing springs. Racing front camber plates are included for further performance. KW Clubsport guarantees excellent handling, best performance, highest agility and fantastic lap times.
  • Height adjustable coilovers - Front - 40-80mm, Rear - 30-60mm
  • Performance setup for the racetrack
  • Dampers in compression & rebound forces independently adjustable
  • Use of high performance linear race springs: Front 685 lbs/inch, Rear - progressive.
  • Stainless steel technology "inox-line"
  • Includes front camber plate mounts
    Fitment note: wheel spacers may be required depending on wheel sizing and offset.

    KW Clubsport Development and Testing




    This item fits the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic
  • Show More Show Less
    KW Suspension - Corporate Logo
    T#:11547
    Part#: 10220005
    Ships in 4 Business Days
    $ 2,044.00 USD
    Free Shipping
    $ 2,044.00 USD
    Free Shipping
    Factory Pre-set Damping The Variant 1 is KW s basic simple and effective coil over kit that is still packed with lots of features - Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension, Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance, Individually height-adjustable - Front = 25-55mm lowering; Rear = 25-55mm lowering, TUV approved lowering range and operation, Expert engineering and design for ease-of-use and long durability, This is the ideal coil over kit for a 5-series owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice. Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. Lifetime warranty! This item fits the following BMWs: 2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i Sedan Not for wagon or all-wheel drive models.
    Show More Show Less

    KW Suspension - Corporate Logo
    T#:361870
    Part#: 15220080
    Back Ordered
    $ 2,834.00 USD
    Free Shipping
    $ 2,834.00 USD
    Free Shipping

    Adjustable Rebound Damping 

    The KW Variant 2 gives shock rebound control to give you more options in fine-tuning the handling of the car. The V2 includes the same features of the V1 kit, including -

    • Adjustable Rebound with fixed compression settings - optimal ride comfort then dial in more grip and a better balance with less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 25-55mm lowering; Rear = 20-50mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,

    This kit is an excellent compromise between a fully-adjustable V3 suspension and the basic V1 street kit. It's great for someone who does not want to make complicated and time-consuming shock adjustments. Just dial in the rebound for more grip and less body motions. Set it back for a compliant street ride. 

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. Not for cars with the factory EDC system. 

    Lifetime warranty! 

    FREE FEDEX GROUND SHIPPING!
    FREE FEDEX GROUND shipping within the 48 contiguous states. 

    This item fits the following BMWs:
    2011+ F10 BMw 528i 535i 550i without EDC
    2009+ F01 BMW 740i 740li 750i 750li 
    Not for cars with Adaptive Drive.

    Show More Show Less

    KW Suspension - Corporate Logo
    T#:361430
    Part#: 35220029
    Back Ordered
    $ 3,094.00 USD
    Free Shipping
    $ 3,094.00 USD
    Free Shipping

    Adjustable Rebound & Compression Damping

    State-of-the-art technology from motor sports for more performance on the road for your E38 7 series. The separate and independently adjustable rebound- and compression damping allows for an individual suspension setup for different uses and preferences. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed.

    • Individually adjustable rebound and compression
    • Infinitely variable rebound damping adjustment
    • 14-way adjustable compression damping
    • Unique, individually working damping force adjustment
    • Stainless steel technology "inox-line"
    • Individually height-adjustable - Front - 30-60mm, Rear - 20-50mm
    • TUV approved lowering range
    • High-quality component parts for long durability

    When using original tires, wheel spacers may be required 
    Not for vehicles with automatic self leveling control.

    FREE FEDEX GROUND SHIPPING! FREE FEDEX GROUND shipping within the 48 contiguous states. 

    This item fits the following BMWs:
    1995-2001 E38 BMW 740i 740il 750il

    Show More Show Less
    KW Suspension - Corporate Logo
    T#:11571
    Part#: 10220049
    Ships in 4 Business Days
    $ 2,094.00 USD
    Free Shipping
    $ 2,094.00 USD
    Free Shipping

    Factory Pre-set Damping

    The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -

    • Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 40-80mm lowering; Rear = 30-60mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,

    This is the ideal coil over kit for a wagon owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!

    This item fits the following BMWs:
    2006-2012 E91 BMW 325xi 328xi 328i xDrive - Wagon

     

    Show More Show Less
    KW Suspension - Corporate Logo
    T#:4908014
    Part#: 352200DA
    Back Ordered
    $ 3,784.00 USD
    Free Shipping
    $ 3,784.00 USD
    Free Shipping
    The KW V3 coilovers offer a track-worthy package for the street with its dual dampening technology. The separate and independently adjustable rebound and compression dampening allow for the end-user to fine-tune their suspension setup for the ultimate in handling. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed. This kit includes and will give you: Damping technology with individually adjustable rebound- and compression technology Stainless Steel "Inox-Technology" Lowering range approved by the TüV High-quality components for long durability Infinitely variable rebound damping adjustment 14-way adjustable compression damping Unique, individually working damping force adjustment Comprehensive documentation for easy use KW was founded in 1995 and at the beginning, it only existed of three employees and had an operating area that was rather small. Today, KW is represented all over the world and has approximately 200 employees in five locations. Currently, KW is the epitome for premium products in car tuning and automobile refinement. KW offers its customers the largest suspension program world-wide and each component is tested using their state-of-the-art seven-post drive dynamics test. Range of lowering is 1.2-2.0" for the front and 1.2-2.0" for the rear.
    Show More Show Less


    KW Suspension - Corporate Logo
    T#:361869
    Part#: 10220080
    Back Ordered
    $ 2,294.00 USD
    Free Shipping
    $ 2,294.00 USD
    Free Shipping

    Factory Pre-set Damping 

    The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -

    • Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 25-55mm lowering; Rear = 20-50mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,

    This is the ideal coil over kit for a 5-series owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice. 

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
    Cars with the factory EDC electronic adjustable shocks must have the system disabled with the optional KW EDC Cancellation Kit (or similar). This is a direct fit for cars without EDC. 

    Lifetime warranty! 

    FREE FEDEX GROUND SHIPPING!
    FREE FEDEX GROUND shipping within the 48 contiguous states. 

    This item fits the following BMWs:
    2011+ F10 BMw 528i 535i 550i
    2009+ F01 BMW 740i 740li 750i 750li 
    Not for cars with Adaptive Drive.

    Show More Show Less
    KW Suspension - Corporate Logo
    T#:349022
    Part#: 1022000R
    Back Ordered
    $ 2,094.00 USD
    Free Shipping
    $ 2,094.00 USD
    Free Shipping
    Factory Pre-set Damping

    The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -
  • Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-50mm lowering; Rear = 30-55mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    This is the ideal coil over kit for a F30/F32 owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
    Cars with the factory EDC electronic adjustable shocks must have the system disabled with the optional KW EDC Cancellation Kit (or similar). This is a direct fit for cars without EDC.

    Lifetime warranty!




    These KW Variant 1 coil overs fit the following BMWs:
    2012+ F30 BMW 320i xDrive 328i xDrive - Sedan
    2013+ F32 BMW 428i xDrive Coupe
  • Show More Show Less
    KW Suspension - Corporate Logo
    T#:11562
    Part#: 10220024
    Special Order: No Guaranteed ETA
    $ 1,924.00 USD
    Free Shipping
    $ 1,924.00 USD
    Free Shipping
    Factory Pre-set Damping

    The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -
  • Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 35-65mm lowering; Rear = 35-65mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    This is the ideal coil over kit for an E46 Xi owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.




    This item fits the following BMWs:
    2001-2005 E46 BMW 325xi 330xi
  • Show More Show Less

    KW Suspension - Corporate Logo
    T#:338381
    Part#: 3522000X
    Back Ordered
    Starting at $ 4,784.00 USD
    Starting at $ 4,784.00 USD
    Adjustable Rebound & Compression Damping

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -
  • Separate adjustments for compression (14 positions) and rebound (infinite settings),
  • Stiffer springs over stock for less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-50mm lowering; Rear = 30-55mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control!

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    Lifetime warranty!




    This item fits the following BMWs:
    2014+ F22 BMW 228i
    2012+ F30 BMW 320i 328i - Sedan
    2013+ F32 BMW 428i - Coupe
  • Show More Show Less

    KW Suspension - Corporate Logo
    T#:11655
    Part#: 35220066
    Back Ordered
    $ 4,034.00 USD
    Free Shipping
    $ 4,034.00 USD
    Free Shipping
    E65 (765); all models (bundle incl. EDC delete unit) KW Coilover Kit V3
    KW Suspension - Corporate Logo
    T#:50731706
    Part#: 10220029-B
    Back Ordered
    $ 1,854.00 USD
    Free Shipping
    $ 1,854.00 USD
    Free Shipping
    The ideal choice for drivers who want to lower their vehicle without the guesswork.

    KW Suspension - Corporate Logo
    T#:50766803
    Part#: 352200EX
    Back Ordered
    $ 3,784.00 USD
    Free Shipping
    $ 3,784.00 USD
    Free Shipping
    The KW V3 is the ultimate suspension solution for the 430i xDrive Convertible.
    KW Suspension - Corporate Logo
    T#:11627
    Part#: 35220008
    Back Ordered
    $ 3,394.00 USD
    Free Shipping
    $ 3,394.00 USD
    Free Shipping

    Adjustable Rebound & Compression Damping

    State-of-the-art technology from motor sports for more performance on the road for your E39 5 Series. The separate and independently adjustable rebound- and compression damping allows for an individual suspension setup for different uses and preferences. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed.

    • Individually adjustable rebound and compression
    • Infinitely variable rebound damping adjustment
    • 14-way adjustable compression damping
    • Unique, individually working damping force adjustment
    • Stainless steel technology "inox-line"
    • Individually height-adjustable - Front = 35-65mm lowering; Rear = 30-60mm lowering,
    • TUV approved lowering range
    • High-quality component parts for long durability

    Fitment Notes: This kit is not for vehicles equipped with EDC or self-leveling suspensions. Wheel spacers may be required depending on wheel/tire sizing and ride height setting.

    This item fits the following BMWs:
    1997-2003 E39 BMW 525i 528i 530i 540i
    Not for Sport Wagons.

    Show More Show Less

    KW Suspension - Corporate Logo
    T#:338242
    Part#: TMS338242
    Back Ordered
    Starting at $ 1,589.00 USD
    Starting at $ 1,589.00 USD
    Factory Pre-set Damping

    The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -
  • Pre-set damping optimized for a blend of ride comfort and handling with less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 25-50mm lowering; Rear = 30-55mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    This is the ideal coil over kit for a F33 owner who does not plan on tracking or autocrossing the car and just wants a lower, more aggressive stance and better handling. KW has set the shock damping rates to be an excellent balance for a smooth yet taut ride, and to resist bodyroll motions for better handling. The Variant 1 differs from the Street Comfort set in that it has stiffer springs and revised shock settings. If you want a sportier ride and better handling than stock the Variant 1 is an excellent choice.

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
    Cars with the factory EDC electronic adjustable shocks must have the system disabled with the optional KW EDC Cancellation Kit (or similar). This is a direct fit for cars without EDC.

    Lifetime warranty!




    These KW Variant 1 coil overs fit the following BMWs:
    2013+ F33 BMW 428i Convertible
    2014+ F36 BMW 428i Gran Coupe
  • Show More Show Less

    KW Suspension - Corporate Logo
    T#:11636
    Part#: 35220024
    Back Ordered
    $ 3,094.00 USD
    Free Shipping
    $ 3,094.00 USD
    Free Shipping
    Adjustable Rebound & Compression Damping

    State-of-the-art technology from motor sports for more performance on the road for your E46 3 series. The separate and independently adjustable rebound- and compression damping allows for an individual suspension setup for different uses and preferences. The unique patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety, is fixed.
  • Individually adjustable rebound and compression
  • Infinitely variable rebound damping adjustment
  • 14-way adjustable compression damping
  • Unique, individually working damping force adjustment
  • Stainless steel technology "inox-line"
  • Individually height-adjustable - Front - 35-65mm, Rear - 35-65mm
  • TUV approved lowering range
  • High-quality component parts for long durability.



    This item fits the following BMWs:
    2001-2005 E46 BMW 325xi 330xi
  • Show More Show Less
    KW Suspension - Corporate Logo
    T#:11575
    Part#: 10220087
    Back Ordered
    $ 2,464.00 USD
    Free Shipping
    $ 2,464.00 USD
    Free Shipping
    The Variant 1 is KW's basic simple and effective coil over kit that is still packed with lots of features -Lifetime warranty!
    KW Suspension - Corporate Logo
    T#:348844
    Part#: 35220026
    Back Ordered
    $ 3,684.00 USD
    Free Shipping
    $ 3,684.00 USD
    Free Shipping
    Adjustable Rebound & Compression Damping

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -
  • Separate adjustments for compression (14 positions) and rebound (infinite settings),
  • Stiffer springs over stock for less bodyroll than the standard suspension,
  • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
  • Individually height-adjustable - Front = 30-60mm lowering; Rear = 25-50mm lowering,
  • TUV approved lowering range and operation,
  • Expert engineering and design for ease-of-use and long durability,
    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control!

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires.

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting.
    The factory EDC system must be disabled with the KW EDC Cancellation Kit.

    Lifetime warranty!




    This item fits the following BMWs:
    2002-2008 E65 BMW 745i 745li 750i 750li 760i 760li
  • Show More Show Less