Optimize Your MINI with Heated Oxygen Sensors

Is your Check Engine light persistently on, accompanied by troublesome error codes? The solution may be right here. Our Oxygen sensor package for your MINI serves a vital role in monitoring the fuel-air mixture, communicating the ideal fuel level mix to the ECU for optimal performance.

Key Features:

• Includes two heated O2 sensors—one for pre-catalytic and one for post-catalytic use.
• Detect issues before the Check Engine light with a significant drop in gas mileage.
• Ensure your MINI's engine runs at peak performance.
• Also referred to as a Lambda Probe.

Vargas builds on their stock replacement turbo kits with this Stage 1 upgrade. Using the stock housings but with improved internals, this N54 turbo upgrade is good up to 470whp. Stage 1 is a hybrid of stock and upgraded internals - a new larger higher-flow cast compressor wheel matched with the stock turbine wheel. The Vargas stainless wastegate arms are also part of the rebuild. The Vargas standard rebuild is good up to 400whp so Stage 1 gives you a more capable turbo system to match your upgrade goals.

Vargas Turbo Technologies has been in business since 1979, offering rebuilt and re-engineered turbo solutions. With the N54, they identified a need for both cost-effective turbo replacements and proven turbo upgrades. The biggest complaint on N54 turbos is the rattle from the wastegates. The factory wastegates have actuator arms that lose their tension very easily, resulting in an annoying rattle. N54 wastegate rattle is the biggest complaint we hear from our customers. Vargas rebuilds each turbo assembly with OEM internals and replaces the actuator arm with a stainless steel arm of their own design. Because the Stage 1 uses stock BMW/Mitsubishi turbo housings, all of the stock turbo plumbing and intake hoses will match up. It's recommended that the rest of the system be upgraded to handle your tuning goals. The final Vargas rebuilt turbos are better than the factory rebuilds and at a lower cost!

Two other upgrades are also offered for Stage 1 -

• TD04 thrust bearing upgrade - stronger and 30% more surface area than the stock thrust bearing for better bearing life and less stress
• Billet Aluminum compressor wheel - stronger and more efficient compressor wheel than stock for 20% better airflow

Silicone inlet and turbo manifold pipes are also strongly recommended as upgrades over the stock plastic and aluminum pipes. Since both are prone to cracks, the silicone will be a lot stronger and almost no chance of a disappointing boost leak. Turbo replacement is the best time to add the silicone hoses. There are two styles of turbo inlet pipes - with stock diverter valves (DV) or with aftermarket blow-off valve (BOV). For the turbo manifold, there is no standardized connection to the intercooler so you will need to make note of which type you have and select the appropriate adapter from the options list.
Option A (+$25) - 2.5" and 90* turn up from the intercooler (CPE, AA, ER Sport, CXRacing)
Option B - 2.5" and angled up from the intercooler (AD Engineering, ETS, Helix, Cobb, ER Compeition)
Option C (+$25) - 3.0" and angled up from the intercooler (VRSF)
Option D (+$25) - 2.75" and angled up from the intercooler (Wagner EVO)
Option E (+$50) - 3.0" and straight out from the intercooler (AA Race)
Option F (+$25) - 2.5" and straight out from the intercooler (Forge)
Option G (+$15) - 3.0" and straight up from the interooler (AMS)

Install Kit - an Install Kit is also offered that includes all of the additional parts and pieces that will need to be replaced during this install (gaskets, hardware, etc).

Oil Recommendation - modern engine oil is formulated for emissions and to be environmentally friendly. The additives in current oil lowers the oil's ability to withstand high temperatures and stresses, lowering its shear strength and its lubricating properties. Vargas recommends oils with high ZDDP (zinc and phosphorus) content that will better protect and cool the turbo bearings. Examples of high-zinc oils are Red Line Race, Red Line Euro, Motul 300V Racing, Joe Gibbs Racing, Valvoline VR-1 oil, and most Diesel-spec oils that you can buy off-the-shelf. Some oils, especially the Race type, will need more frequent oil changes and may be harmful to catalytic converters.

WHP rating: 470. This rating is used to compare various stage of Vargas turbo kits. There is no advertised horsepower gain with this kit as it depends on your other mods and tuning. The rating is provided as a reference to use in your tuning planning. Custom N54 tuning is recommended to match these turbos to your existing mods and upgrades.

Discover the incredible JMTCs Super 42 high-pressure, high-flow dual-scrolling turbo upgrade by JM Turbo Cooper, designed for enthusiasts craving peak performance. With a substantial 42mm compressor, this turbocharger is engineered to deliver early and extended boost compared to the JWC turbo, resulting in outstanding response, torque, and power gains across the entire power band. The 42mm design also ensures an added kick at the top end when you need it most, making it the ultimate choice for those seeking an extreme street upgrade that delivers full race performance. It provides impressive torque, quick spooling, and extended durability. For race applications, consider pairing it with one of our aftermarket exhaust systems to unlock its full potential.

It's important to note that unlocking the extra power requires a custom tune. Running this turbo without a tune will result in minimal to no HP gain.

Estimated Performance Gains:

• Approximately 60hp with a custom tune, intercooler, downpipe, cold air intake, new plugs, basic maintenance, and carbon blasting/cleaning.
• 100hp+ (All of the above) in combination with a ported head, larger valves, ICE pipe, intercooler, and a 2.3/4"+ exhaust.

Please ensure you have a cleaned or new aftermarket catalytic converter and intercooler to avoid potential boost codes.

Key Features of the Upgraded Turbo:

• Brand new turbo with a 42mm compressor
• Lightened high-flow exhaust turbine
• High-strength K04 internals
• Upgraded 360-degree bearing
• Designed for higher pressure
• High-temperature alloy turbine housing
• Dual-scrolling turbine housing
• Water-cooled bearing housing
• Compatible with OEM Intake Boot (N14) and N18 Engines with some adjustments
• Fits AEM intake, NM Eng intake, and Forge Intake (Boot) Hose with minor adjustments.

Garrett offers a comprehensive range of turbochargers suitable for various diesel and gasoline light vehicle engines, covering power units from 0.6 liters to 6.7 liters and everything in between. For heavy vehicles and off-highway equipment, Garrett's product lineup caters to engines with power ratings from 60hp to a formidable 4000hp. With Garrett's advanced technologies and innovations, major global automakers have integrated their products into nearly 100 million vehicles. The company continually launches approximately 100 new applications every year, spanning gas, diesel, natural gas, electric, and fuel cell powertrains.

Signs of a failing turbocharger include abnormal oil consumption, smoking, increased turbo lag, failure to maintain boost, or the vehicle entering "limp mode." To revive your BMW's performance, it's essential to replace any malfunctioning turbocharger.

JMTC S42 Turbocharger MINI Cooper Upgraded Turbo K03 - Refurbished

Explore the JMTC S42 Turbocharger MINI Cooper Upgraded Turbo K03 - Refurbished, crafted for MINI Cooper enthusiasts seeking enhanced performance and power gains.

• Upgraded 42mm Compressor: Delivers early spool and sustained boost for enhanced performance.
• High Flow Exhaust Turbine: Lightened design for improved exhaust flow.
• Enhanced Durability: Upgraded with K04 internals and a 360-degree bearing for reliability under high pressure.
• Dual Scrolling Turbine Housing: Provides optimal airflow and efficiency.
• Water-cooled Bearing Housing: Maintains bearing integrity under high temperatures.
• OEM and Aftermarket Compatibility: Fits OEM and aftermarket intakes with minor modifications for optimal fitment.

Upgrade your MINI Cooper with the JMTC S42 Turbocharger for uncompromising performance and power.

Please contact JM Turbo Cooper for local and regional tuners requiring custom tunes.