Engines make more power when you're able to move as much air and fuel as possible through them. However, air density is just as important as air volume. Cooler air is denser air, so in addition to keeping your engine cool, it's important to make sure that your intake charge is as cool as possible. Turner Motorsport's upgraded intercooler works to reduce air temperatures with a bare minimum of pressure drop. Less pressure drop means less restriction, and a turbocharger that doesn't have to work as hard. This results not only in a longer service life for your turbocharger, but a substantial increase in performance as well.

The stepped design increases volume and surface are in a limited space by adding an additional smaller core at the top of the intercooler. Both cross sectional area and frontal surface area are increased by a whopping 56%, with a design that still weighs under 20 pounds. On the stock intercooler, the temperature differential between the inlet and outlet sides of the intercooler represented a 95 degree drop. With the Turner Motorsport intercooler, that drop was increased to a chilling 140 degrees. The dyno results don't lie: as a bolt-in upgrade, expect gains of 18 wheel horsepower and 10 lb/ft of torque. With a tune and supporting modifications, further gains are possible, up to 36 horsepower and 28 lb/ft of torque.

This cast aluminum intercooler features an attractive, easy to clean matte black finish, with etched Turner logos on the front and bottom. If you're looking for the ultimate cooling system upgrade for your turbo BMW, look no further.

• Cast aluminum construction
• Bar and plate design
• 56% increase in frontal surface area & cross sectional area
• Decrease in temperature of 45 degrees from inlet side to outlet side (95 degree drop stock on outlet side vs. 140 degree drop on Turner outlet side)
• Significantly less restriction (pressure drop of consistently 0.75 psi vs. 1.5-2.5 psi stock)
• +18HP/10TQ (+36HP/28TQ with tune and supporting mods)
• Weighs under 20 lbs.
• Overall size: 520mm wide, 210mm tall
• Mounting hardware inlcuded

Upgrade to the following OE Intercoolers: 17517600531, 17517600530, 17517618809

Fits the Following BMWs:

F22 F23 228i 228i M235i M235ix

F30 F31 F32 F33 F34 F36 328i 328ix 335i 335ix 428i 428ix 435i 435ix

Upgrade Your BMW Maintenance with Stainless Steel Hose Clamps from ECS Tuning

ECS Tuning introduces premium full stainless steel hose clamps, offering superior quality and convenience for your BMW maintenance. Avoid dealership delays and overpricing by choosing from a selection of band widths, ensuring you receive top-quality hose clamps without overpaying.

Key Benefits:

• Premium full stainless steel hose clamps
• Various band widths for enhanced convenience
• High-quality alternative to dealership pricing
• Readily available stock eliminates waiting time

Why buy two tools when you can get one that will do many jobs like this open end wrench? It is great for removing and installing the fan clutch and plastic oil filter cap. Also works great for removing and installing the VAN0S solenoid on M50 engine family. Use the same tools the Turner Motorsport tech's use!

Features:

• Made of Chrome Vanadium Steel for strength
• 32/36mm open end sides

From years of European automotive experience, the enthusiasts at ECS Tuning have developed a strong understanding of what it takes to produce a high-quality brake pad. After thousands of miles and many different pad compounds, they've landed on the ideal blend for the new DD23 "Daily Driver" brake pad! This enthusiast-developed pad offers confident stopping power, very low dust, quiet braking, and a positive initial bite. The perfect choice for your daily-driven Euro!

If you find yourself “pumping the brakes” over the brake pad selection process for your daily driver, your answer is this DD23 pad. This is the one!

As a team of enthusiasts who own all types of European cars, we have the advantage of the exposure that comes with the enthusiast lifestyle - and have a strong understanding of what makes a great brake pad. In the pursuit of a really great brake pad for daily driving, we’ve tested a wide range of brake pads. After thousands of test miles, iterating through a variety of pad compounds, we’ve landed on the ideal blend for our DD23 Daily Driver ceramic pad.

Features:

Good stopping power - Brake pads need to stop your car, period, so this is key. We focused on selecting a compound that offers a healthy level of friction (both when hot and when cold) for safe, positive stopping power.

Positive initial bite - You should feel your brakes engage as you press the pedal, but it should not feel like an on/off switch! Advanced ceramic composition means you’ll enjoy a smooth transition on and off of the brake pedal, meaning your passengers will have a comfortable ride in stop-and-go traffic. We’ve hit a good balance here.

Very low-dust - Some factory-installed pads are eye-poppingly dusty, which is a no-go for us. Thanks to the composition of this ceramic pad, which is copper-free and contains a negligible amount of other metals, dust is both lighter in color and very limited in amount. We’ve improved on the “dust factor” without sacrificing on bite and stopping power as a good compromise, which will be a win for anyone who doesn’t detail daily (or anyone who does, too!)

Quiet braking - It’s not a race pad, so it shouldn’t squeal like one. Extremely low metallic composition means they will not squeal. DD23 is comfortable and quiet - both on the ears and in lack of vibration transmitted through the cabin.

Long life - This should be an obvious one. Your daily driver pads should last and last, so that was key in selecting our ideal compound. This is another benefit to having ceramic material composition versus a softer organic pad (which have higher metallic and various organic elements) and wear much faster. Ours are kind to rotors, too (no accelerated wear characteristics) for many miles of motoring.

A simple design that makes compressing the caliper piston back in a breeze. The days of balancing the piston while turning a C-clamp are over.

Note: Not designed for use with screw-in type brake pistons.

ECS Titanium Wheel Bolts

Upgrade your BMW's performance with ECS Titanium Wheel Bolts, designed for weight savings and durability. These premium bolts are perfect for performance enthusiasts seeking high-quality components that won't rust. Crafted from annealed titanium alloy, they offer a significant weight reduction of 50% compared to steel bolts of the same size, reducing rotational mass for improved performance.

Benefits:

• 50% lighter than steel bolts for reduced rotational mass
• CNC'd from annealed titanium alloy for exceptional strength and durability
• Tested to class 10.9 fastener proof load requirements without signs of fatigue or failure
• Rust-resistant construction ensures long-lasting performance
• Compatible with BMW and other vehicles with 14mm diameter, 1.25mm thread pitch, and 17mm head size

Upgrade your BMW's wheel bolts to ECS Titanium Wheel Bolts for improved performance and durability. These bolts are designed for performance enthusiasts looking to save weight and maintain high quality. With a 50% reduction in weight compared to steel bolts, they reduce rotational mass on your vehicle. CNC'd from annealed titanium alloy, they undergo rigorous testing to ensure durability and resistance to fatigue or failure. Before installation, ensure thorough cleaning of hub threads to prevent any issues.

• 50% lighter than steel bolts for reduced rotational mass
• CNC'd from annealed titanium alloy for durability
• Tested to class 10.9 fastener proof load requirements
• Compatible with wheel spacers for proper fitment

Protecta socket are used to keep ugly scratch marks from showing up after torqueing down wheel lugs.

Features:

• Coated six-point long reach deep-well impact sockets 
• Color coded mar-free exterior coatings that prevent nicks and scratches left by plain metal sockets
• 17mm, 19mm and 21mm Sockets included

Use these with your breaker bar or impact gun to remove the tightest wheel bolts and lug nuts: when reinstalling wheels, use them to final torque wheel fasteners to factory specifications.

Combine these with our torque limiting sockets and the Schwaben ½-inch torque wrench for a complete wheel fastener solution.

Are you tired of the traditional white DRLs that came with your BMW from the factory? Upgrade your headlights with the new Turner Motorsport LED DRL Modules to achieve the highly sought-after Yellow DTM or GT-style appearance!

Turner Motorsport LED DRL Modules offer the first true Plug-and-Play solution for your BMW, allowing you to easily swap them out without damaging your original DRLs. Unlike many options that require you to remove your DRL modules and pry the LED circuit board away from the factory heatsink—risking a bent circuit board and cracked traces—Turner Motorsport’s modules come with a pre-mounted heatsink. This design eliminates the risk and saves time on installation. Plus, if you ever need to revert back to stock, simply swap the modules out and you’re good to go.

These LED DRL modules are designed to work with the factory headlight controllers and wiring. No coding or additional wiring is necessary for a seamless integration.

This kit includes all the DRL modules necessary to upgrade both the driver and passenger side headlights.

Installation Note: Due to the location of the factory modules, removal of the fender liners and/or front bumper may be necessary.

Featuring a T60 Torx head, the belt tensioner found on the N54/N55 engine has exceptionally tight quarters. Use of this tool will allow access to the lock pin hole without excessive component removal, making belt removal and installation a much easier task.

This tool fits all N54/N55 powered BMW, including: 
2008+ E82 BMW 135i 1M Coupe 
2014+ F22 BMW M235i 
2006+ E90 BMW 335i 335xi 335i xDrive - Sedan 
2007+ E92 BMW 335i 335is 335xi 335i xDrive - Coupe 
2007+ E93 BMW 335i - Convertible 
2012+ F30 BMW 335i 335i xDrive - Sedan 
2013+ F32 BMW 435i 435i xDrive - Coupe 
2014+ F34 BMW 335i xDrive GT - Gran Tourismo 
2015+ F80 BMW M3 - Sedan 
2015+ F82 BMW M4 - Coupe 
2015+ F83 BMW M4 - Convertible 
2006-2010 E60 BMW 535i 535xi 535i xDrive 
2010+ F07 BMW 535i GT, 535i xDrive GT 
2011+ F10 BMW 535i 535i xDrive 
2012+ F13 BMW 640i 
2009+ F01 BMW 740i 740li 
2011+ F25 BMW X3 xDrive35i 
2007-2013 E70 BMW X5 xDrive35i 
2007-2014 E71 BMW X6 xDrive35i 
2009+ Z4 BMW Z4 sDrive35i Z4 sDrive35is 

The Schwaben Metric Bubble Flaring Tool Set stands as the ultimate solution for achieving precise brake line connections and flawless tubing applications. This tool set unlocks the ability to craft immaculate ISO bubble flares on brake lines and tubing systems commonly found in European, Japanese, and select domestic model brake lines. The outcome? Connections that are not only secure but also capable of thriving under your vehicle's demanding conditions.

At its core, this set features a robust and enduring hardened steel bar, embodying the essence of durability. Complementing this bar is an extensive array of adapters tailored for 4.75mm, 6mm, 8mm, and 10mm tubing, showcasing the set's versatility across various applications.

Discover unparalleled precision as you secure your brake lines and tubing with the utmost accuracy. This tool set empowers you to effortlessly shape bubble flares, guaranteeing connections that are both leak-proof and resilient. Whether you're a devoted automotive technician or a passionate enthusiast, the Schwaben Metric Bubble Flaring Tool Set is right for you!

Includes:

• Schwaben Metric Bubble Flaring Tool
• Hardened Steel Bar for Enduring Durability
• Adapters for 4.75mm, 6mm, 8mm, and 10mm Tubing

The ECS Tuning Performance Coilover System is meticulously engineered for the daily BMW driver who desires a blend of enhanced performance, aesthetics, and comfort. With 32 levels of damping and height adjustments specifically tailored to your vehicle, these coilovers hit the perfect balance between firmness and compliance, delivering an aggressive stance and significantly improved handling.

Key Performance Features:

32 Levels of Rebound Damping Adjustment: Fine-tune your suspension for optimal road feedback and comfort. Lowering Adjustment Range of 1" - 4": Achieve the perfect stance with adjustable ride height. Spring Rate: 8K Front, 10K Rear for balanced performance. Heat-Treated, Progressive Rate Coil Springs: Enhance handling with reduced body roll and road-sticking grip. Adjustable Damping Monotube Shocks/Struts: Paired with optimized coil springs for a lower center of gravity and improved cornering. Product Design:

Durable Gloss Black Powder Coat Finish: Ensures longevity and a sleek appearance for strut and shock bodies. Zinc-Coated Threaded Portions: Provides corrosion protection against the elements, with clear or black zinc finishes available. Reflex Silver Metallic Powder-Coated Coil Springs: Built for durability and aesthetics. Red Anodized Billet Aluminum Spring Seats: Locking collars allow quick, on-car adjustability with included spanner wrenches. Anodized Adjustable Sway Bar End Links: Equipped with heavy-duty bushings for durability. Zinc-Coated, Self-Locking Flanged Nuts: Secures shock and strut shaft pins for reliability. Included Zinc-Coated Strut Mount Securing Nuts: Ensures a secure and rust-resistant installation. Black E-Coated Rear Shock Adjuster Housings: Designed for durability in harsh conditions. Zinc-Coated Lower Spring Perches: Provide additional corrosion resistance. Integrated Bump Stops and Dust Boots: Protect your suspension from dirt and damage. Product Development:

The ECS Tuning Adjustable Damping Coilover System was developed, tested, and refined in-house by our expert Research & Development team in Wadsworth, Ohio. Utilizing advanced product development technology, we ensure each coilover system meets our rigorous standards for precision and quality. Comprehensive long-term testing is conducted on multiple vehicles under the harshest conditions to guarantee reliable performance and durability.

Are you tired of the traditional white DRLs that came with your BMW from the factory? Upgrade your headlights with the new Turner Motorsport LED DRL Modules to achieve the highly sought-after Yellow DTM or GT-style appearance!

Turner Motorsport LED DRL Modules offer the first true Plug-and-Play solution for your BMW, allowing you to easily swap them out without damaging your original DRLs. Unlike many options that require you to remove your DRL modules and pry the LED circuit board away from the factory heatsink—risking a bent circuit board and cracked traces—Turner Motorsport’s modules come with a pre-mounted heatsink. This design eliminates the risk and saves time on installation. Plus, if you ever need to revert back to stock, simply swap the modules out and you’re good to go.

These LED DRL modules are designed to work with the factory headlight controllers and wiring. No coding or additional wiring is necessary for a seamless integration.

This kit includes all the DRL modules necessary to upgrade both the driver and passenger side headlights.

Installation Note: Due to the location of the factory modules, removal of the fender liners and/or front bumper may be necessary.

This tool is designed to work with the difficult to release fuel lines on BMW. Don't risk damaging these costly lines by using the wrong tool. Seals can easily be damaged if not released properly. 

Features:

• Small overall design allows tool to work in hard to reach areas
• Made from aluminum for strong durable use
• Green anodized finish.

Allen Head Bolt

Upgrade your fastening needs with the Allen Head Bolt, a versatile and reliable solution for various applications. Crafted from high-quality materials, these bolts offer exceptional strength and durability. Their allen head design ensures secure tightening and easy access, making them ideal for automotive, construction, and DIY projects. Elevate your projects with the precision and reliability of Allen Head Bolts.

• High-quality materials for exceptional strength
• Secure tightening with allen head design
• Versatile usage for automotive, construction, and DIY projects
• Reliable and durable solution for various applications

The Schwaben 1/4" Drive 6 Point Deep Socket Set comprises thirteen 1/4" deep metric sockets, each featuring 6-point heads specially crafted for navigating those tricky, confined spaces. With a length of 50mm, these sockets ensure you can reach critical areas with ease.

Furthermore, our LIFETIME REPLACEMENT program provides you with added assurance, ensuring enduring performance and value. Improve your toolkit with the Schwaben 1/4" Drive 6 Point Deep Socket Set and confidently tackle any task at hand.

Features:

Access Tight Spaces: These deep sockets, measuring 50mm in length, are expertly designed to reach challenging, confined areas, making them perfect for intricate tasks.

Organized Storage: Included in the set is a practical sliding rail socket holder, helping you maintain a tidy and easily accessible socket arrangement.

Enhanced Grip: Knurled rings encircling the socket bodies ensure a secure hold, even when hands and sockets are covered in oil or grease, minimizing the risk of accidents.

Optimal Torque: The sockets are equipped with corner radii for superior torque distribution, safeguarding fasteners from damage and ensuring efficient performance.

High-Quality Material: Crafted from robust chrome vanadium steel (CR-V), these sockets offer superior wear resistance and toughness compared to high-speed steel, guaranteeing durability and extended lifespan.

Satin Chrome Finish: Not only do the sockets feature an attractive satin chrome finish, but they also provide excellent corrosion resistance, ensuring long-term quality.

Lifetime Replacement: Supported by our lifetime replacement program, this set delivers enduring value and peace of mind, making it a wise addition to your toolkit investment.

Includes:

• 4 mm
• 4.5 mm
• 5 mm
• 5.5 mm
• 6 mm
• 7 mm
• 8 mm
• 9 mm
• 10 mm
• 11 mm
• 12 mm
• 13 mm
• 14 mm