BMW Internal Engine Parts

ARP Connecting Rod Bolt Kit - E36 M3 S50/S52 (US only), E46 323/325 ...

T#:2210

Part#: 201-6201

Ships on Aug 6, 2026

$ 222.99 USD

Add to Wish List

Qty

$ 222.99 USD

Add to Wish List

Set of 12 ProSeries connecting rod bolts, made by ARP -- the world leader in fastener technology. Each bolt is made of ARP2000 material, which exceeds the strength of 8740 Chrome Moly, and is able to achieve clamp load at 220,000psi. ARP2000 fasteners are used widely in motorsport and drag racing as an upgrade from 8740 Chrome Moly in both steel and aluminum rods. These are simply the best connecting rod bolts available, making them ideal for ultra high performance, racing and forced induction applications.

This set replaces the factory BMW rod bolt number 11-24-1-739-728 (11241739728) which measures 44mm in length. The 44mm BMW rod bolt was used on all US spec E36 M3 (3.0 and 3.2 liter), 1999-2000 E46 323i/323Ci, 2001-2005 325i/325Ci, Z3 1.9,2.5 and 3.2, as well as Z4 2.5. It was also used on SOME of the M50 2.5 liter engines from 1992-1995 -- but check before ordering! Opened ARP bolt kits are not returnable. If your M50 2.5 liter engine has 53mm rod bolts, you will require kit part# 201-6301 instead.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

These ARP connecting rod bolts fit the following BMWs:
1992-1995 E36 325i/is *** with 44mm rod bolts only ***
1995-1995 E36 M3 S50 3.0 liter (US model)
1996-1999 E36 M3 S52 3.2 liter (US model)
1999-2000 E46 323i & 323Ci (US)
2001-2005 E46 325i, 325xi & 325Ci (US)
1998-2002 Z3 2.3 / 2.5 liter
1998-2000 MZ3 M Roadster & M Coupe
2003-2005 Z4 2.5 liter
*** DOES NOT FIT E36 328 ****

Show More Show Less

ARP Main Stud Kit for S54 (E46M3 & Z4M)

T#:2192

Part#: 201-5002

In Stock at Vendor

$ 171.99 USD

Add to Wish List

Qty

$ 171.99 USD

Add to Wish List

This ARP main stud set is for the S54 3.2 liter, as found in all 2001 to 2006 E46 M3, as well as the 2006-2008 Z4 M Roadster and M Coupe models. Switching to the ARP main stud kit eliminates main cap walk and fretting, as well as protects the threads in your engine block. Each stud is made using the best materials, process, design and engineering, which exceeds even the most stringent racing and aerospace specifications. This S54 main stud kit includes hardened parallel-ground washers and aerospace quality nuts.

The studs are manufactured from 8740 chrome moly steel, heat-treated in-house to 190,000 psi tensile strength, and precision J-form threads rolled after heat-treat to create a fastener that has threads 1000% stronger than others. On the E30 M3, there's no reason to settle for anything less than the best, which is why we carry and use ARP fasteners and studs on our own BMW race cars.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

This ARP main stud kit fits the following BMWs:
2001-2006 E46 M3 3.2 liter coupe/convertible
2001-2002 MZ3 M Coupe & M Roadster (S54 engine)
2006-2008 MZ4 M Coupe & M Roadster

Show More Show Less

ARP Head Stud Kit - N54

T#:24112781

Part#: ARP-HSK-N54-S

Back Ordered

$ 499.99 USD

Add to Wish List

Qty

$ 499.99 USD

Add to Wish List

ARP ARP2000 Head Stud Kit - N55

T#:42335661

Part#: ARP-HSK-N55-S

In Stock

$ 699.99 USD

Add to Wish List

Qty

$ 699.99 USD

Add to Wish List

Enhance your BMW N55 engine's ability to handle higher levels of boost with 5150's custom-designed Head Stud Kit from ARP, the global leader in fastener technology!

Schrick Performance Camshaft Set - 238/272 - F80 M3, F82/83 M4 S55 ...

T#:637691

Part#: SCHCSSS55238/272

Back Ordered

$ 1,899.99 USD

Add to Wish List

Qty

$ 1,899.99 USD

Add to Wish List

High-performance camshafts are key to increasing the top-end power output of your S55 engine at high boost. 238/272 degree, 10.6mm/10.5mm lift. Perfectly compatible with OE valves, springs, VANOS, Valvetronic etc

Show More Show Less

Main Stud Kit - M50/M52/S50/S52

T#:26171653

Part#: ARP-MSK-M50

Back Ordered

$ 169.99 USD

Add to Wish List

Qty

$ 169.99 USD

Add to Wish List

This ARP Main Stud Kit is designed to replace BMW 11111735525 for the M50/M52/S50/S52 engines that were used in a variety of BMW models. One significant advantage of these main studs is their ability to prevent main cap walk, which can occur when the main caps shift or move out of position, potentially causing damage to the engine. In addition, ARP Main Studs can safeguard the threads of your engine block, providing an extra layer of protection against potential damage. When opting for main studs instead of factory bolts, it's important to note that the engine builder should mic the bores. Using studs may require a line hone to ensure proper fitment and alignment. A line hone is a machining process that can be used to resize and reshape the main bearing bores, ensuring that they are perfectly round and concentric. This is crucial for ensuring proper oil clearance and preventing premature bearing wear. By mic'ing the bores and performing a line hone if necessary, engine builders can ensure that the main studs are installed correctly and that the engine will perform reliably and at its best. Installation Instructions: To ensure accurate torque readings and proper thread engagement, thoroughly clean all threads in the engine block. If necessary, use an ARP chaser to chase the threads. Before installing any hardware, carefully inspect and clean it for defects, shipping damage, and proper fit, length, and dimension. Gently screw the main studs into the engine block by hand until they are snug. Install the main caps, checking for any binding or misalignment. Apply ARP Ultra-torque fastener assembly lubricant to the threads of the studs, nuts, and washers. Install the washers and nuts onto the studs and tighten them by hand. It is highly recommended to use the ARP Ultra-torque fastener assembly lubricant provided with the kit, as it provides consistent clamping force and reduces friction on the studs. Do not use motor oil or other low-quality lubricants. PRELOAD (TORQUE) RECOMMENDATIONS 7. Following the manufacturer-recommended torque sequence tighten the nuts in steps 1-3 Step 1: Tighten to 20 ft-lbs. Step 2: Tighten to 40 ft-lbs. Step 3: Tighten to 60 ft-lbs. With the included ARP Ultra-Torque fastener assembly lubricant

Show More Show Less

Cam Sprocket Bolt Kit for MINI W10 W11 1.6L Engine

T#:26404847

Part#: 206-1001

In Stock

$ 38.99 USD

Add to Wish List

Qty

$ 38.99 USD

Add to Wish List

Enhance the strength and reliability of your Mini's engine with the ARP Main Stud Kit. Engineered to exceed aerospace specifications, these main studs provide superior durability and performance for your engine build. Prevent camshaft flex and ensure optimal torque down for all main caps with ARP's high-quality hardware.

Benefits:

Exceeds aerospace specifications for superior strength
Prevents camshaft flex for improved engine performance
Ensures optimal torque down for all main caps
Complete kit includes main bolts and hardened washers for convenience

Show More Show Less

ARP Head Stud Kit B48 Undercut CA625+, 12pt

T#:48367044

Part#: 401-4704

In Stock

$ 588.99

This product was last offered at the strikethrough price on
06-08-2026

$ 529.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 588.99

This product was last offered at the strikethrough price on
06-08-2026

$ 529.99 USD

Limited Qty Sale

Add to Wish List

BMW M62/M62TU Engine ARP Rod Bolt Kit - E39 540i, E38 740i/iL, E53 X5...

T#:189788

Part#: 201-6302

In Stock at Vendor

$ 258.99 USD

Add to Wish List

Qty

$ 258.99 USD

Add to Wish List

Set of 12 ProSeries ARP2000 connecting rod bolts for the Euro-spec M3 engine. Made by ARP, the world leader in fastener technology. The best rod bolts available for the M60 and M62TU. Ideal for ultra high performance, racing & forced induction applications. Each bolt is made of ARP2000 material, which exceeds the strength of 8740 Chrome Moly, and is able to achieve clamp load at 220,000psi. ARP2000 fasteners are used widely in professional motorsport and drag racing as an upgrade from 8740 Chrome Moly in both steel and aluminum rods.

ARP is a company that prides itself on performance and durability, no matter the application. Offering the finest engine hardware money can buy is the driving initiative at ARP and this is evidenced by the staggering amount of satisfied customers and race teams the world over.

This item fits the following BMWs:
1997-2003 E39 BMW 540i
1995-2001 E38 BMW 740i 740il
2000-2003 E53 BMW X5 4.4i X5 4.6is

Show More Show Less

ARP Head Stud Kit - N63

T#:26238387

Part#: ARP-HSK-N63

Ships in 3 Business Days

Starting at $ 749.99 USD

Add to Wish List

Starting at $ 749.99 USD

Add to Wish List

Upgrade the performance of your BMW N63 engine with our ARP Head Stud Kits, specifically designed for the turbocharged V-8 N63 engine. As you increase the power output of your engine beyond its factory specifications, the head and block may start to separate, causing factory bolts to stretch and fail. Our ARP Head Studs are designed to be stronger than factory bolts, ensuring your race engine stays together even under extreme conditions. Our Custom Age 625+ kit is made from a material with a tensile strength of 260 ksi, substantially higher than the 190 ksi of the ARP 2000 head stud. It's an ideal choice for individuals who want to push the limits of their N63 builds.

Show More Show Less

ARP Main Stud Kit, BMW S14

T#:28537458

Part#: ARP-MSK-S14

Ships in 4 Business Days

$ 119.99 USD

Add to Wish List

Qty

$ 119.99 USD

Add to Wish List

This ARP Main Stud Kit is designed to replace BMW 11111735525 for the S14 B20, S14B23, S14B25, S14B27 engines found in the E30 M3. One significant advantage of these main studs is their ability to prevent main cap walk, which can occur when the main caps shift or move out of position, potentially causing damage to the engine. In addition, ARP Main Studs can safeguard the threads of your engine block, providing an extra layer of protection against potential damage. When opting for main studs instead of factory bolts, it's important to note that the engine builder should mic the bores. Using studs may require a line hone to ensure proper fitment and alignment. A line hone is a machining process that can be used to resize and reshape the main bearing bores, ensuring that they are perfectly round and concentric. This is crucial for ensuring proper oil clearance and preventing premature bearing wear. By mic'ing the bores and performing a line hone if necessary, engine builders can ensure that the main studs are installed correctly and that the engine will perform reliably and at its best.

Show More Show Less

HEAD STUD KIT - BMW S85

T#:20089537

Part#: ARP-HSK-S85

Ships in 6 Business Days

$ 579.99 USD

Add to Wish List

Qty

$ 579.99 USD

Add to Wish List

ARP Cylinder Head Stud Kit - Custom Age 625+ - BMW S63 4.4L

T#:51110152

Part#: 201-4703

Ships in 9 Business Days

$ 1,099.99 USD

Add to Wish List

Qty

$ 1,099.99 USD

Add to Wish List

For engine builders pushing the absolute limits of high-performance engineering, the ARP Custom Age 625+ Cylinder Head Stud Kit represents the pinnacle of fastening technology. While standard aircraft-quality steels and even the renowned ARP2000 alloy are impressive, the proprietary Custom Age 625+ super-alloy provides a massive leap in capability by increasing tensile strength by an additional 40,000 to 60,000 psi. This specialized hardware is engineered specifically for ultra-high-boost applications, offering superior fatigue resistance and the unique ability to maintain its structural integrity under extreme temperatures that would cause lesser materials to weaken.

Show More Show Less

Performance Camshaft Set - 238/272

T#:26904914

Part#: SCH-N52-238/272

Special Order: No Guaranteed ETA

$ 1,749.99 USD

Add to Wish List

Qty

$ 1,749.99 USD

Add to Wish List

BMW S85 10 Cyl. 296/284-Degree - Camshaft Set

T#:589847

Part#: S85-296-284KT

Ships on Nov 6, 2026

$ 2,113.99 USD

Add to Wish List

Qty

$ 2,113.99 USD

Add to Wish List

This is one full set of Schrick camshafts, 4 cams total, for the S85 V10 M5 engine. These cams are the 296/284 degree version and include two intake cams and two exhaust cams. Professional installation is a must due to the complexity of the dual VAN0S V10 motor.

Show More Show Less

Osvat Intake Valve - E28, E30, E34

T#:1196099

Part#: 11341706631

In Stock

$ 12.99

This product was last offered at the strikethrough price on
06-22-2026

$ 10.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 12.99

This product was last offered at the strikethrough price on
06-22-2026

$ 10.99 USD

Limited Qty Sale

Add to Wish List

Standard replacement intake valve

Pro Series Connecting Rod Bolts

T#:31556195

Part#: 206-6008

Ships on Aug 14, 2026

$ 74.99 USD

Add to Wish List

Qty

$ 74.99 USD

Add to Wish List

ARP Ultra-Torque Fastener Assembly Lubricant (Select Your Size) ...

T#:338571

Part#: TMS1733

In Stock

Starting at $ 1.99 USD

Add to Wish List

Starting at $ 1.99 USD

Add to Wish List

If you are using a premium fastener, such as the ARP brand rod bolts, head bolts, or main bolts, then you will want this assembly lube. Made to be used to precisely duplicate all ARP fastener preload specifications.

Show More Show Less

Pro Series Head Bolts W10 W11 1.6L Engine

T#:26404879

Part#: 206-3601

Ships in 3 Business Days

$ 131.99 USD

Add to Wish List

Qty

$ 131.99 USD

Add to Wish List

Enhance the performance of your Mini with ARP's Pro series cylinder head bolts. These bolts are cold-forged for maximum molecular integrity and heat-treated to withstand extreme pressure, rated at 190,000 psi. Featuring 12-point heads, each kit includes hardened parallel washers for precise torque readings and even load distribution.

Cold-forged for maximum molecular integrity
Heat-treated to withstand extreme pressure
Rated at 190,000 psi for exceptional strength
12-point heads for easy installation
Includes hardened parallel washers for precise torque readings

Show More Show Less

ARP Head Stud Kit - S63

T#:26238368

Part#: ARP-HSK-S63

Ships in 3 Business Days

Starting at $ 749.99 USD

Add to Wish List

Starting at $ 749.99 USD

Add to Wish List

With 5150's ARP head stud kit, you can securely tune up the boost on your BMW S63 engine without worrying about the cylinder heads lifting. Specifically designed for the turbocharged V-8 S63 engines found in high-performance models such as F10 M5, F90 M5, F12 M6, F95 X5M, F96 X6M and F13 M6. 201-4702, 201-4703. As you increase the power output of your engine beyond its factory specifications, the head and block may start to separate, causing factory bolts to stretch and fail. Our ARP Head Studs are designed to be stronger than factory bolts, ensuring your race engine stays together even under extreme conditions. Our Custom Age 625+ kit is made from a material with a tensile strength of 260 ksi, substantially higher than the 190 ksi of the ARP 2000 head stud. It's an ideal choice for individuals who want to push the limits of their S63 builds. ARP S63 Head Stud Kit for: M5 F10 2011-2016 M5 F90 2017 M6 F13 2011-2018 X5M F95 2013-2018 X6M F96 2014-2019 ARP2000 Step 1: Tighten to 30 ft-lbs. Step 2: Tighten to 60 ft-lbs. Step 3: Tighten to 90 ft-lbs. Custom Age 625+ Step 1: Tighten to 30 ft-lbs. Step 2: Tighten to 60 ft-lbs. Step 3: Tighten to 110 ft-lbs.

Show More Show Less

Intake Valve - Priced Each

T#:596779

Part#: 11341267721

In Stock at Vendor

$ 13.99

This product was last offered at the strikethrough price on
05-07-2026

$ 8.99 USD

Add to Wish List

Qty

$ 8.99 USD

Add to Wish List

Replacement intake valve 40.0/6.97MM

ARP Head Stud Kit, BMW S14

T#:28537451

Part#: ARP-HSK-S14

Ships in 4 Business Days

$ 179.99 USD

Add to Wish List

Qty

$ 179.99 USD

Add to Wish List

This ARP head stud Kit is designed for the BMW S14 B20, S14B23, S14B25, S14B27 engines found in the E30 M3. Installing ARP head studs can provide several benefits, including increased clamping force, improved head gasket sealing, and greater overall engine strength. This is especially important in high-performance and racing applications where the engine is subjected to increased stress and higher temperatures. Before installing ARP head studs, it is important to properly clean and prepare the engine block and cylinder head mating surfaces. It is also recommended to use ARP Ultra-Torque Fastener Assembly Lubricant during installation to ensure proper torque and clamping force. Instructions: 1. To ensure proper thread engagement and accurate torque readings, clean ALL threads in the block. Chase if necessary with ARP Thread Chaser. 2. Clean and inspect all hardware prior to installation. Look for obvious defects or shipping damages, plus proper fit, length and dimension. 3. If the cylinder head studs protrude into a water jacket, lubricate the block threads of the studs with ARP THREAD SEALER. 4. Screw studs into the block “HAND TIGHT ONLY”. 5. Install the cylinder head(s) and check for binding or misalignment. 6. Lubricate the stud threads, nuts and washers with ARP ULTRA-TORQUE FASTENER ASSEMBLY LUBRICANT. Then install the washers and the nuts onto the studs and tighten them hand tight. ARP recommends using the ARP ULTRA-TORQUE FASTENER ASSEMBLY LUBRICANT that is provided with each kit as opposed to motor oil. This is due to higher friction on the studs as well as inconsistencies in the clamping force of the fasteners when motor oil or other low quality lubricants are used.

Show More Show Less

Osvat Exhaust Valve - Sold Each - E28, E30, E34

T#:1196100

Part#: 11341708896

In Stock at Vendor

$ 35.98 USD

Add to Wish List

Qty

$ 35.98 USD

Add to Wish List

Replace your worn valves

ARP Head Stud Kit B48

T#:48367046

Part#: 201-4704

In Stock at Vendor

$ 263.99 USD

Add to Wish List

Qty

$ 263.99 USD

Add to Wish List

BMW M20 6 Cyl. 272-Degree - Camshaft

T#:26638221

Part#: 005601720-00

Special Order: No Guaranteed ETA

$ 1,274.99 USD

Add to Wish List

Qty

$ 1,274.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M20 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 272 Duration Intake @ 1mm - Duration Exhaust - 272 Duration Exhaust @ 1mm - Intake Peak Timing - 111 Exhaust Peak Timing - 111 Cam Lobe Lift Intake - 7 Cam Lobe Lift Exhaust - 7 Valve Lift w/o Valve Clearance Intake - 11 Valve Lift w/o Valve Clearance Exhaust - 11 Valve Clearance Intake - 0, 25 Valve Clearance Exhaust - 0, 25

Show More Show Less

BMW M20 6 Cyl. 288-Degree - Camshaft

T#:26638223

Part#: 005601880-00

Special Order: No Guaranteed ETA

$ 1,189.99 USD

Add to Wish List

Qty

$ 1,189.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M20 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 288 Duration Intake @ 1mm - Duration Exhaust - 288 Duration Exhaust @ 1mm - Intake Peak Timing - 110 Exhaust Peak Timing - 110 Cam Lobe Lift Intake - 7, 3 Cam Lobe Lift Exhaust - 7, 3 Valve Lift w/o Valve Clearance Intake - 11, 4 Valve Lift w/o Valve Clearance Exhaust - 11, 4 Valve Clearance Intake - 0, 25 Valve Clearance Exhaust - 0, 25

Show More Show Less

BMW M30 6 Cyl. 282-Degree - Monotronik- Camshaft

For Vehicles Equipped With Bosch Monotronik Only

T#:26638228

Part#: 002201820-01

Special Order: No Guaranteed ETA

$ 1,567.99 USD

Add to Wish List

Qty

$ 1,567.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M30 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 282 Duration Intake @ 1mm - Duration Exhaust - 282 Duration Exhaust @ 1mm - Intake Peak Timing - 110 Exhaust Peak Timing - 110 Cam Lobe Lift Intake - 8, 4 Cam Lobe Lift Exhaust - 8, 4 Valve Lift w/o Valve Clearance Intake - 10, 6 Valve Lift w/o Valve Clearance Exhaust - 10, 6 Valve Clearance Intake - 0, 25 Valve Clearance Exhaust - 0, 25

Show More Show Less

BMW M10 4 Cyl. 292-Degree - Counter Clockwise Distributor - Camshaft ...

For Vehicles With Counter Clockwise Distributor Only

T#:26005193

Part#: 000201920-02

Special Order: No Guaranteed ETA

$ 1,161.99 USD

Add to Wish List

Qty

$ 1,161.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M10 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 292 Duration Intake @ 1mm - 251 Duration Exhaust - 292 Duration Exhaust @ 1mm - 251 Intake Peak Timing - 110 Exhaust Peak Timing - 110 Cam Lobe Lift Intake - 7, 6 Cam Lobe Lift Exhaust - 7, 6 Valve Lift w/o Valve Clearance Intake - 10 Valve Lift w/o Valve Clearance Exhaust - 10 Valve Clearance Intake - 0, 2 Valve Clearance Exhaust - 0,2

Show More Show Less

BMW S14 4 Zyl. 4 Vent.

T#:26638235

Part#: 0227D1080-01

Special Order: No Guaranteed ETA

$ 1,619.99 USD

Add to Wish List

Qty

$ 1,619.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the S14 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 308 Duration Intake @ 1mm - 277 Duration Exhaust - 308 Duration Exhaust @ 1mm - 277 Intake Peak Timing - 102 Exhaust Peak Timing - 102 Cam Lobe Lift Intake - 12, 2 Cam Lobe Lift Exhaust - 12, 2 Valve Lift w/o Valve Clearance Intake - 12, 2 Valve Lift w/o Valve Clearance Exhaust - 12, 2 Valve Clearance Intake - 0, 25 Valve Clearance Exhaust - 0,3

Show More Show Less

BMW S14 4 Zyl. 4 Vent.

T#:26638236

Part#: 0227D1760-01

Special Order: No Guaranteed ETA

$ 1,403.99 USD

Add to Wish List

Qty

$ 1,403.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the S14 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 276 Duration Intake @ 1mm - 245 Duration Exhaust - 276 Duration Exhaust @ 1mm - 245 Intake Peak Timing - 106 Exhaust Peak Timing - 106 Cam Lobe Lift Intake - 11, 3 Cam Lobe Lift Exhaust - 11, 3 Valve Lift w/o Valve Clearance Intake - 11, 3 Valve Lift w/o Valve Clearance Exhaust - 11, 3 Valve Clearance Intake - 0, 35 Valve Clearance Exhaust - 0,4

Show More Show Less

N54 Schrick Camshaft Set 268/265

T#:25739348

Part#: N54CAMSKT

Ships on Nov 6, 2026

Sale - Save 10% $ 3,415.99

This product was last offered at the strikethrough price on
07-07-2026

$ 3,074.39 USD

Add to Wish List

Qty

Sale - Save 10%

$ 3,415.99

This product was last offered at the strikethrough price on
07-07-2026

$ 3,074.39 USD

Add to Wish List

Take your N54-powered BMW to the next level with this upgraded camshaft kit from Schrick Cams! Increasing the air allowed in and out of the motor by increasing both lift and duration over stock is one of the most effective ways to add power to your car next to adding more boost. We recommend finding a competent tuner to get the most out of your individual setup. Duration Duration Intake: 268 Duration Intake @ 1mm: 219 Duration Exhaust: 264 Duration Exhaust @ 1mm: 214 Intake Peak Timing: 125,6 Exhaust Peak Timing: -128 Lift Cam Lobe Lift Intake: 7,2 Cam Lobe Lift Exhaust: 6,54 Valve Lift Without Valve Clearance Intake: 12 Valve Lift Without Valve Clearance Exhaust: 11 Valve Clearance Intake: hydr. Valve Clearance Exhaust:

Show More Show Less

BMW M42 4 Cyl. 264-Degree - Exhaust Camshaft

T#:26038540

Part#: 0256A1641-01

Special Order: No Guaranteed ETA

$ 1,351.99 USD

Add to Wish List

Qty

$ 1,351.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M42 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Exhaust - 264 Duration Exhaust @ 1mm - 227 Exhaust Peak Timing - 110 Cam Lobe Lift Exhaust - 10. 4 Valve Lift w/o Valve Clearance Exhaust - 10, 4 Valve Clearance Exhaust - Hydraulic

Show More Show Less

BMW S50/S52 6 Cyl. 296-Degree - Intake Camshaft

T#:26671614

Part#: 0284E1960-0V2

Special Order: No Guaranteed ETA

$ 1,835.99 USD

Add to Wish List

Qty

$ 1,835.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the S50 and S52 engines. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 296 Duration Intake @ 1mm - 266 Intake Peak Timing - 129 Cam Lobe Lift Intake - 12, 4 Valve Lift w/o Valve Clearance Intake - 12, 4 Valve Clearance Intake - 0, 25

Show More Show Less

BMW M10 4 Cyl. 316-Degree - Clockwise Distributor - Camshaft ...

For Vehicles With Clockwise Distributor Only

T#:26638214

Part#: 000201160-03

Special Order: No Guaranteed ETA

$ 1,511.99 USD

Add to Wish List

Qty

$ 1,511.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M10 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 316 Duration Intake @ 1mm - 278 Duration Exhaust - 316 Duration Exhaust @ 1mm - 278 Intake Peak Timing - 100 Exhaust Peak Timing - 100 Cam Lobe Lift Intake - 9, 1 Cam Lobe Lift Exhaust - 9, 13 Valve Lift w/o Valve Clearance Intake - 11, 9 Valve Lift w/o Valve Clearance Exhaust - 11, 9 Valve Clearance Intake - 0, 25 Valve Clearance Exhaust - 0,3

Show More Show Less

BMW S50/S52 6 Cyl. 308-Degree - Exhaust Camshaft

T#:26671615

Part#: 0284A1080-1V2

Special Order: No Guaranteed ETA

$ 1,835.99 USD

Add to Wish List

Qty

$ 1,835.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the S50 and S52 engines. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Exhaust- 308 Duration Exhaust @ 1mm - 274 Exhaust Peak Timing - 104 Cam Lobe Lift Exhaust - 13 Valve Lift w/o Valve Clearance Exhaust - 13 Valve Clearance Exhaust - 0, 25

Show More Show Less

BMW S50/S52 6 Cyl. 296-Degree - Exhaust Camshaft

T#:26671613

Part#: 0284A1960-0V2

Special Order: No Guaranteed ETA

$ 1,727.99 USD

Add to Wish List

Qty

$ 1,727.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the S50 and S52 engines. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Exhaust- 296 Duration Exhaust @ 1mm - 266 Exhaust Peak Timing - 76-114 Cam Lobe Lift Exhaust - 12, 4 Valve Lift w/o Valve Clearance Exhaust - 12, 4 Valve Clearance Exhaust - 0, 25

Show More Show Less

Schrick Exhaust Camshaft - E46 M3, MZ3, MZ4 (S54) - 280 Degree, 14.0m...

T#:23847549

Part#: 0415A180001

Special Order: No Guaranteed ETA

$ 1,876.99 USD

Add to Wish List

Qty

$ 1,876.99 USD

Add to Wish List

BMW US S50 6 Cyl. 296-Degree - Exhaust Camshaft

T#:26671609

Part#: 0284A1960-001

Special Order: No Guaranteed ETA

$ 1,727.99 USD

Add to Wish List

Qty

$ 1,727.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the US S50 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Exhaust - 296 Duration Exhaust @ 1mm - 266 Exhaust Peak Timing - 108 Cam Lobe Lift Exhaust - 12, 4 Valve Lift w/o Valve Clearance Exhaust - 12, 4 Valve Clearance Exhaust - 0,25

Show More Show Less

BMW M10 4 Cyl. 284-Degree - Counter Clockwise Distributor - Camshaft ...

For Vehicles With Counterclockwise Distributor Only!

T#:26638211

Part#: 000201840-02

Special Order: No Guaranteed ETA

$ 1,161.99 USD

Add to Wish List

Qty

$ 1,161.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M10 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 284 Duration Intake @ 1mm - 243 Duration Exhaust - 284 Duration Exhaust @ 1mm - 243 Intake Peak Timing - 110 Exhaust Peak Timing - 110 Cam Lobe Lift Intake - 7, 2 Cam Lobe Lift Exhaust - 7, 21 Valve Lift w/o Valve Clearance Intake - 9, 5 Valve Lift w/o Valve Clearance Exhaust - 9, 5 Valve Clearance Intake - 0, 2 Valve Clearance Exhaust - 0,3

Show More Show Less

BMW US S50 6 Cyl. 296-Degree - Intake Camshaft

T#:26671611

Part#: 0284E1960-0V1

Special Order: No Guaranteed ETA

$ 1,835.99 USD

Add to Wish List

Qty

$ 1,835.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the US S50 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake- 296 Duration Intake @ 1mm - 266 Intake Peak Timing - 122 Cam Lobe Lift Intake - 12, 4 Valve Lift w/o Valve Clearance Intake - 12, 4 Valve Clearance Intake - 0, 25

Show More Show Less

BMW M10 4 Cyl. 328-Degree - Counter Clockwise Distributor - Camshaft ...

For Vehicles With Counter Clockwise Distributor Only

T#:26638215

Part#: 000201280-01

Special Order: No Guaranteed ETA

$ 1,511.99 USD

Add to Wish List

Qty

$ 1,511.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M10 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 328 Duration Intake @ 1mm - 287 Duration Exhaust - 316 Duration Exhaust @ 1mm - 273 Intake Peak Timing - 100 Exhaust Peak Timing - 100 Cam Lobe Lift Intake - 9, 2 Cam Lobe Lift Exhaust - 8, 51 Valve Lift w/o Valve Clearance Intake - 12 Valve Lift w/o Valve Clearance Exhaust - 11, 15 Valve Clearance Intake - 0, 25 Valve Clearance Exhaust - 0,3

Show More Show Less

BMW M42 4 Cyl. 256-Degree - Intake Camshaft

T#:26038539

Part#: 0256E1561-00

Special Order: No Guaranteed ETA

$ 1,351.99 USD

Add to Wish List

Qty

$ 1,351.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M42 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake- 256 Duration Intake @ 1mm - Intake Peak Timing - 110 Cam Lobe Lift Intake - 10. 4 Valve Lift w/o Valve Clearance Intake - 10, 4 Valve Clearance Intake - Hydraulic

Show More Show Less

BMW M42 4 Cyl. 272-Degree - Intake Camshaft

T#:26038541

Part#: 0256E1721-00

Special Order: No Guaranteed ETA

$ 1,351.99 USD

Add to Wish List

Qty

$ 1,351.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M42 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake- 272 Duration Intake @ 1mm - Intake Peak Timing - 110 Cam Lobe Lift Intake - 10. 4 Valve Lift w/o Valve Clearance Intake - 10, 4 Valve Clearance Intake - Hydraulic

Show More Show Less

BMW M42 4 Cyl. 256-Degree - Exhaust Camshaft

T#:26038538

Part#: 0256A1561-00

Special Order: No Guaranteed ETA

$ 1,351.99 USD

Add to Wish List

Qty

$ 1,351.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M42 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Exhaust - 256 Duration Exhaust @ 1mm - Exhaust Peak Timing - 110 Cam Lobe Lift Exhaust - 10. 4 Valve Lift w/o Valve Clearance Exhaust - 10, 4 Valve Clearance Exhaust - Hydraulic

Show More Show Less

BMW M10 4 Cyl. 316-Degree - Counter Clockwise Distributor - Camshaft ...

For Vehicles With Counter Clockwise Distributor Only

T#:26638213

Part#: 000201160-04

Special Order: No Guaranteed ETA

$ 1,511.99 USD

Add to Wish List

Qty

$ 1,511.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M10 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 316 Duration Intake @ 1mm - 278 Duration Exhaust - 316 Duration Exhaust @ 1mm - 278 Intake Peak Timing - 100 Exhaust Peak Timing - 100 Cam Lobe Lift Intake - 9, 1 Cam Lobe Lift Exhaust - 9, 13 Valve Lift w/o Valve Clearance Intake - 11, 9 Valve Lift w/o Valve Clearance Exhaust - 11, 9 Valve Clearance Intake - 0, 25 Valve Clearance Exhaust - 0,3

Show More Show Less

BMW M10 4 Cyl. 284-Degree - Clockwise Distributor - Camshaft ...

For Vehicles With Clockwise Distributor Only!

T#:26638210

Part#: 000201840-01

Special Order: No Guaranteed ETA

$ 1,161.99 USD

Add to Wish List

Qty

$ 1,161.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M10 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 284 Duration Intake @ 1mm - 243 Duration Exhaust - 284 Duration Exhaust @ 1mm - 243 Intake Peak Timing - 110 Exhaust Peak Timing - 110 Cam Lobe Lift Intake - 7, 2 Cam Lobe Lift Exhaust - 7, 21 Valve Lift w/o Valve Clearance Intake - 9, 5 Valve Lift w/o Valve Clearance Exhaust - 9, 5 Valve Clearance Intake - 0, 2 Valve Clearance Exhaust - 0,3

Show More Show Less

BMW M10 4 Cyl. 304-Degree - Counter Clockwise Distributor - Camshaft ...

For Vehicles With Counter Clockwise Distributor Only

T#:26638212

Part#: 000201040-02

Special Order: No Guaranteed ETA

$ 1,161.99 USD

Add to Wish List

Qty

$ 1,161.99 USD

Add to Wish List

Schrick has been dedicated to engine performance through the development of only the highest-quality camshafts for more than 40 years. They've created a bond with BMW enthusiasts nearly the entire time, offering options for both the street and track using top materials for strength and accuracy. Schrick has grown into a technology center offering one of the most advanced locations for engine testing and manufacturing. These are the same cams used by many high-end German tuners who are achieving sizeable gains with the M10 engine. For the power-hungry, these cams are a great way to achieve a linear increase in horsepower from mid-range, up to redline. Duration Intake - 304 Duration Intake @ 1mm - 262 Duration Exhaust - 304 Duration Exhaust @ 1mm - 262 Intake Peak Timing - 108 Exhaust Peak Timing - 108 Cam Lobe Lift Intake - 8, 2 Cam Lobe Lift Exhaust - 8, 21 Valve Lift w/o Valve Clearance Intake - 10, 5 Valve Lift w/o Valve Clearance Exhaust - 10, 5 Valve Clearance Intake - 0, 25 Valve Clearance Exhaust - 0,3

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Benefits:

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results