BMW Internal Engine Parts

Unlock the full potential of your S54’s valvetrain with our High Performance Cam Followers/Rocker Arms, built for precision, durability, and reliability in high-revving performance engines.

Crafted from forged chromoly steel and finished with a diamond-like carbon coating, these cam followers are engineered to deliver exceptional strength, reduced friction, and outstanding wear resistance, ideal for demanding street or track use. Each unit is precision-ground for consistent clearances and smooth, stable valvetrain motion at all RPMs. Despite heavy-duty construction, our design retains the same weight as the factory rocker arm, preserving OE valvetrain geometry and balance while offering superior longevity and performance.

Rocker arms wear in conjunction with the camshafts, meaning the two must be replaced simultaneously. Aftermarket and performance camshaft options (Schrick, CAT-Cams, etc.) are typically ground from softer blanks and, as a result, cannot be used with factory rocker arms. We tested our performance cam followers with aftermarket camshafts to validate compatibility, ensuring smooth, reliable, and safe operation under demanding conditions.

Features:

Forged chromoly construction for maximum strength and durability Diamond-like carbon-coated surface reduces friction, extends service life, and permits compatibility with aftermarket and performance camshaft options Precision-ground tolerances ensure consistent and quiet operation OEM weight match maintains valvetrain balance and reliability Superior wear resistance for performance and endurance applications NOTE: Rocker arms are wear items and must be replaced alongside a new set of camshafts, regardless of profile or manufacturer. Installing a new set of rocker arms onto a used set of camshafts is NOT recommended.

Kit Contents:

24 DLC-Coated Rocker Arms (required to complete both camshafts) Product Development: Our Turner Performance Rocker Arms are the result of advanced engineering, testing, and quality assurance by Turner’s Research & Development team. Every stage of development employs FARO laser scanning, SolidWorks 3D CAD modeling, and in-house rapid prototyping for precise fitment and design validation. Performance and durability are proven through Mustang AWD 500 SE dyno testing and Superflow SF-750 Flowbench analysis, ensuring each component meets Turner’s uncompromising standards for performance and quality.

Unlock the full potential of your S54’s valvetrain with our High Performance Cam Followers/Rocker Arms, built for precision, durability, and reliability in high-revving performance engines.

Crafted from forged chromoly steel and finished with a diamond-like carbon coating, these cam followers are engineered to deliver exceptional strength, reduced friction, and outstanding wear resistance, ideal for demanding street or track use. Each unit is precision-ground for consistent clearances and smooth, stable valvetrain motion at all RPMs. Despite heavy-duty construction, our design retains the same weight as the factory rocker arm, preserving OE valvetrain geometry and balance while offering superior longevity and performance.

Rocker arms wear in conjunction with the camshafts, meaning the two must be replaced simultaneously. Aftermarket and performance camshaft options (Schrick, CAT-Cams, etc.) are typically ground from softer blanks and, as a result, cannot be used with factory rocker arms. We tested our performance cam followers with aftermarket camshafts to validate compatibility, ensuring smooth, reliable, and safe operation under demanding conditions.

Features:

Forged chromoly construction for maximum strength and durability Diamond-like carbon-coated surface reduces friction, extends service life, and permits compatibility with aftermarket and performance camshaft options Precision-ground tolerances ensure consistent and quiet operation OEM weight match maintains valvetrain balance and reliability Superior wear resistance for performance and endurance applications NOTE: Rocker arms are wear items and must be replaced alongside a new set of camshafts, regardless of profile or manufacturer. Installing a new set of rocker arms onto a used set of camshafts is NOT recommended.

Kit Contents:

One set of 12 DLC-Coated Rocker Arms (services intake OR exhaust camshaft) 24 Rocker Arms / 2 Sets of 12 Rocker Arms required to complete both intake and exhaust camshafts. Product Development: Our Turner Performance Rocker Arms are the result of advanced engineering, testing, and quality assurance by Turner’s Research & Development team. Every stage of development employs FARO laser scanning, SolidWorks 3D CAD modeling, and in-house rapid prototyping for precise fitment and design validation. Performance and durability are proven through Mustang AWD 500 SE dyno testing and Superflow SF-750 Flowbench analysis, ensuring each component meets Turner’s uncompromising standards for performance and quality.

Rod bearings should be replaced as a preventative measure before 80,000 miles. This package is the most complete rod bearing overhaul kit available and includes not just the latest BMW rod bearings and connecting rod bolts, but also everything else that should be replaced with the oil pan and front subframe off the car.

Rod bearings continue to be a sore subject among M3, M5, and M6 owners. The rod bearings in the S85 V10 have been known to fail within 60,000 miles. There could be a number of reasons for premature failure with a lot of finger-pointing as to the real cause. Whatever the reason, rod bearings are wearing out sooner than expected and their replacement should be considered a required preventative maintenance item. We suggest a replacement interval of between 60,000-80,000 miles with frequent engine oil analysis done along the way*. Driving moderately and allowing the engine to warm up before hard use will also extend rod bearing life.

After doing so many rod bearing replacements in our own service shop we have put together this comprehensive overhaul package. Our package includes -

Genuine BMW rod bearings
- 11247841703, upper bearings - latest design from BMW (either original or WPC treated**)
- 11247841702, upper bearings - latest design from BMW (either original or WPC treated**)
- 11247834522, connecting rod bolts
- Red Line engine assembly lube

Oil Pan
- 11137836361, oil pan gasket
- 07119905485, oil pan screws (required by BMW)
- 07129905600, oil pan screws (required by BMW)
- 11137836568, oil pan screws
- 07119963129, seal washers
- 11417836233, auxiliary oil pump gaskets
- 11121304174, oil pickup tube o-ring

Replacing the rod bearings requires mechanical knowledge and skill, a clean workspace, and several specialist tools. Our preferred procedure is to leave the engine in the car but remove the front subframe. The engine must be supported from above with an engine brace. Removing the front subframe involves disconnecting the control arms and steering rack and steering column. The oil pan can then be removed and you can access the connecting rods and bearings. Replacing the rod bearings themselves is straightforward but patience and forethought will be extremely helpful. In addition to analyzing the severity of the rod bearing wear, the crankshaft must also be inspected closely for damage. Rod bearings that have been severely worn may have damaged the crankshaft (requiring replacement or machining).

* BMW released an updated rod bearing around 2011 that uses different materials than the original design. The old rod bearings were constructed with several layers or metal, including copper and lead. If an engine oil analysis revealed high levels of these specific metals then it was a sure sign that the rod bearings were nearing replacement. However, the new BMW bearings do not use copper or lead so an oil analysis will not alert you to heavy bearing wear. The new bearings are also a harder material which prolonged the life of the bearing but increased the liklihood of crankshaft damage if a bearing failed. Even though the bearing theoretically lasts longer it's even more important to preventativly replace them before they damage the crankshaft.

** These WPC-treated bearings are the best we have seen for the S85. WPC is a shot-peening treatment at a microscopic level. It's perfect for sensitive surfaces like bearings. The WPC treatment removes imperfections and high spots, while creating a surface that retains oil better than the original surface. This greatly reduces friction. The bearings in this kit are factory BMW bearings that are sent to WPC for treatment. The treated bearings are stronger with less metal fatigue and less friction than buying off-the-shelf bearings from the dealer.

***BE Bearings is another top pick when considering which bearing kit to choose. Working with Clevite, an OE bearing supplier, their design allows for a bit more clearance than stock, allowing better oil circulation and reducing friction. The material is also made from the original bearing composition of lead-copper, not the updated tin-aluminum used in factory BMW bearings which was excessively hard, potentially damaging the crankshaft when high friction occurred. This softer metal composition can also be tested for via oil analysis, allowing you to see high bearing wear, something the tin-aluminum bearings don't give you the ability to do.

Internal VANOS Pressure Line
One of the VANOS oil lines runs along the inside of the timing chain cover and into the oil pan. It can only be replaced with the oil pan removed. If you have sluggish performance or VANOS fault codes this is one of the common causes and now is the perfect time to replace it. If it fails down the line the oil pan will have to be removed again.

Front Subframe Hardware
Our preferred procedure for accessing the engine block is by disconnecting the control arms and steering rack and then removing the front subframe altogether. This hardware is not required but may be a good idea, especially if your original subframe bolts are rusty. Hardware includes:
31106760222, front subframe mounting bolts
31106770256, front subframe mounting bolts
33326760668, front wishbone collar nut

Tie Rod Boots
32106765782, tie rod boot kit

Motor Mounts with Hardware
22116762607, left motor mount
22116762608, right motor mount
07129904088, motor mount bolts
07129904865, motor mount nuts

Engine Oil Change
Liqui Moly GT1 10w-60 engine oil
11427840594, OEM oil filter.

This package fits the following BMWs:
2006-2010 E60 BMW M5
2006-2011 E63 BMW M6

Elevate your engine's performance to new heights with King SI-Series bearings, meticulously crafted to meet OE applications. Whether you're working on aftermarket gasoline or diesel engine rebuilding projects or enhancing the performance of engines equipped with OE crankshafts, these bearings are the perfect choice.

Key Features:

• Enhanced Crankshaft Finish: The bearings feature an improved crankshaft finish to reduce microscopic ferrite peaks on improperly ground or polished nodular cast iron crankshafts.
• Optimized Oil Clearance: Experience reduced wear and extended engine life thanks to improved oil clearance, resulting in smoother engine operation.
• Noise and Vibration Reduction: These bearings are designed to reduce operating noise and vibration, ensuring a quieter and more comfortable driving experience.
• Efficient Oil Flow: Benefit from decreased excess oil flow, promoting efficient lubrication and reduced oil consumption.

Choose King SI-Series bearings for your engine and enjoy enhanced performance, increased longevity, and reduced noise and vibration. Upgrade your engine with confidence.