This intake tube, also known as an inlet, is a common culprit for vacuum leaks. It supplies air to the turbocharger and is typically made of plastic. However, due to frequent exposure to heat, it is prone to developing cracks or tears.

The N20 airbox includes a built-in MAF sensor. If this tube tears, it can lead to a post-MAF leak and cause your engine to run lean. This is a serious issue that requires prompt replacement to avoid potential damage to your engine.

For a reliable and affordable replacement, consider Febi's high-quality air intake tube. It's a durable solution that ensures a long-lasting repair.

MINI N18 1.6L M7 High Flow Pre-Intercooler Charge Pipe - Black is an essential upgrade for Mini enthusiasts looking to enhance the performance of their MINI N18 1.6L engine. This high-quality charge pipe, in sleek black finish, is designed to increase airflow and reduce turbo lag for improved throttle response and power delivery.

Crafted with precision engineering and durable materials, the MINI N18 1.6L M7 High Flow Pre-Intercooler Charge Pipe - Black ensures a perfect fit and reliable performance. It effectively increases the efficiency of the intercooler system, allowing for cooler and denser intake air for better engine performance.

• Enhances performance of MINI N18 1.6L engine
• Increases airflow and reduces turbo lag
• Improves throttle response and power delivery
• Sleek black finish adds aesthetic appeal
• Crafted with precision engineering and durable materials
• Ensures perfect fit and reliable performance

Investing in the MINI N18 1.6L M7 High Flow Pre-Intercooler Charge Pipe - Black is a smart choice for Mini owners looking to unlock the full potential of their vehicle's engine.

Elevate your MINI's performance with this single piece CNC mandrel bent intake pipe, designed as a seamless replacement for the stock plastic intake pipe and its restrictive resonator. Crafted at the Forge UK HQ in Gloucester, this high-flow intake pipe offers enhanced airflow and can be seamlessly integrated with the OEM air box or the full Forge intake system (FMINDF56). The intake pipe boasts CNC machined outlets, ensuring a hassle-free direct fit for any OEM plug-in components like the blow by heater and vacuum take off.

Highlights:

• Precision-machined Turbo inlet coupler ensuring a good seal is achieved at the turbo inlet.
• High-quality 3-ply Silicone hose bellows design to allow for any engine movement.
• Single piece CNC mandrel bent pipe.
• CNC machined outlets.

MINI R55 to R61 CTS Turbo MINI Cooper S/JCW Throttle Pipe is designed to enhance your vehicle's performance by upgrading the factory throttle body inlet hose. This kit features a high-quality silicone throttle body inlet hose, designed to replace the stock hard plastic component for improved airflow and durability.

• High-Quality Silicone Construction: Provides superior flexibility and strength compared to factory hoses.
• Enhanced Airflow: Improves the efficiency of the throttle body by allowing smoother airflow.
• Durability: Resists high temperatures and pressures, ensuring long-lasting performance.
• Easy Installation: Direct replacement for the stock hose, with no modifications required.

This throttle pipe kit is an excellent choice for both performance enthusiasts and daily drivers seeking to boost the reliability and efficiency of their MINI Cooper S/JCW.

Perfect Fit:
Includes stainless steel clamps for a leak-free seal and heavy-duty 5-Ply reinforced silicone coupling for strength.

Mandrel-bent Tubing:
Constructed of 2-1/2" to 2-3/4" mandrel-bent aluminum tubing and powder-coated textured-red for heat and corrosion resistance. The smooth transition mandrel bends decrease turbulence which increases horsepower and torque. The high-temp wrinkle-black powder-coating insulates the tube from engine heat and protects the tube from corrosion.

aFe Badging:
Unique aluminum laser-cut aFe Power logo plate is welded-on for an aggressive style.

Also Fits:
2014-2016 BMW 128i/ix (F20/21) L4-2.0L (t) N20
2014-2016 BMW 228i/ix/220i (F22/23) 14-16 L4-2.0L (t) N20
2013-2016 BMW 320i/ix (F30/31/34) L4-2.0L (turbo) N20
2012-2016 BMW 328ix (F30) L4-2.0L (turbo) N20
2013-2016 BMW 328i/ix (F31/34) L4-2.0L (turbo) N20
2014-2016 BMW 420i/ix (F32/33) L4-2.0L (turbo) N20
2014-2016 BMW 428i/ix (F32/33/36) L4-2.0L (turbo) N20

Note: This intercooler tube is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicle.

Upgrade your Mini's intake system with the M7 Speed Silicone Intake Hose Kit, including the intake boot, hot side boot, and cold side elbow kit. Crafted from 100% silicone materials resistant to oil and chemicals, this kit offers superior durability, improved airflow, and virtually unlimited service life. Benefits include:

• Direct OE replacement part for easy installation.
• Superior durability and airflow compared to stock parts.
• Retains stock PCV connection location and size.
• No modifications or cutting required for installation.
• 33% larger inside flow volume for enhanced performance.
• Available in four standard M7 colors for customization.
• Easy DIY installation with included stainless steel clamps and instructions.

Forge's full alloy replacement charge pipe features a CNC coupler - permanently resolving issues that accompany the stock plastic charge pipe that is prone to cracking and failure, often causing boost leaks and loss of power on the N55.

Features:

• Powder coated black for durability
• Increase throttle response / decrease turbo lag
• Retain factory O-ring throttle lock flange and electronic diverter valve
• CNC couplers for simple install and uninstall

This product fits the following BMWs:
2014+ F22 M235i M235iX

BMW N54 CTS TURBO BOV PIPE (TIAL FLANGE) is the ultimate upgrade for your BMW's N54 engine, designed specifically for use with the TiAL Q atmospheric blowoff valve. Offered by Turner Motorsport, this CTS Turbo BOV kit includes a 3" mandrel-bent T6 6061 aluminum pipe, finished in a durable black powder coat for long-lasting performance and sleek appearance. The kit ensures a secure fit with 4-ply silicone connectors and stainless steel clamps, providing an OEM-like fit with an aggressive aftermarket sound. Additionally, the pipe features two water-methanol bungs with 1/8" NPT plugs, a CNC machined MAP sensor flange, and a laser-etched CTS Turbo logo. Replace the weak plastic charge piping and failure-prone diverter valve system with this high-quality upgrade, enhancing your ability to hold boost under heavy loads while adding a distinctive sound to your BMW.

• Designed for use with TiAL Q atmospheric blowoff valve
• Durable 3" mandrel-bent T6 6061 aluminum pipe with black powder coat finish
• CNC machined MAP sensor flange for seamless OEM installation
• Includes 4-ply silicone connectors and stainless steel clamps for secure fit
• Features two water-methanol bungs and laser-etched CTS Turbo logo
• Enhances boost holding capacity and provides an aggressive aftermarket sound

Upgrade Your MINI with the M7 Speed Cold Side Lower Intercooler Elbow

Introducing the new Cold Side Lower Intercooler Elbow by M7 Speed for all Generation 2 MINI Coopers equipped with a 1.6-liter turbocharged engine. Crafted with the same high-quality four-ply fabric reinforced 100% silicone material as other popular M7 silicone hose products, this OE replacement elbow offers enhanced durability and performance.

Key Features:

• Direct factory OE replacement with no modifications required
• Smooth and larger bend compared to the convoluted molded rubber OE part
• Resistant to age, oil reaction, high boost applications, and environmental damage
• Designed to withstand up to 58 PSI [4.0 BAR] of charge air pressure
• Includes one silicone elbow and two high-quality lined stainless steel clamps
• Easy installation with basic hand tools
• Currently available only in BLACK

Upgrade your MINI's performance with the M7 Speed Cold Side Lower Intercooler Elbow, designed to replace the OE rubber elbow prone to failure over time. With its durable silicone construction and easy installation, this elbow is perfect for high-performance MINIs running increased boost.