Packaged by Turner BMW Maintenance & Tune-Up Parts

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

GA6HP26Z Automatic Transmission
Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles. This kit includes the transmission filter, gasket and bolts.

This item fits the following BMWs:
E60 BMW 545i 550i 
E63/4 BMW 645Ci 650i  
E65/6 BMW 745i/Li 750i/Li 760i/Li 
E70 BMW 3.5d/dX, 4.8i N62
E71 BMW 50iX N63

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication! Select your vehicle to make sure you are viewing the best Liqui Moly options for your application.

Includes:

12 Liters of Liqui Moly MolyGen 5w-40 Engine Oil

Hengst Oil Filter Kit

OEM Drain Plug & Washer

Liqui Moly Molygen New Generation fully synthetic engine oil is carefully engineered, starting with a high quality synthetic base. What separates Molygen from other engine oils is the molecular friction modifier for reduced friction and wear. Because of this, Molygen glows fluorescent green under UV light, allowing you to easily find any leaks!

The fluorescent green chemical friction modifier smooths out hard metal surfaces, reducing overall engine wear and heat due to friction. Tests have shown to reduce the friction coefficient by 15%!  MolyGen oil is also a great choice for modern forced induction engines which produce much more heat. BMWs are notorious for leaking oil. Make chasing your leak easier with Liqui Moly Molygen New Generation engine oil. (Once you find it, give us a call - we can help you stop that leak, too!)

Properties:

Smooth engine running characteristics

Long engine service life due to exceptional protection against wear

Rapid oil delivery at low temperatures

Optimum oil pressure at all engine speeds

Premium lubrication reliability at high and low temperatures

High shear and ageing stability

Reduces fuel consumption and pollutant emissions

Outstanding engine cleanliness

Tested with catalytic converters and performance proven with turbochargers

Miscible and compatible with commercially-available engine oils

Approved for the following specifications:

ACEA C3

API SN / CF

VAG 502.00 / 505.00

BMW Longlife-01

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Just like the rest of your vehicle's major systems, the cooling system must also be addressed periodically to ensure proper cooling and component reliability. Plastic and rubber components become brittle and prone to splitting or cracking after long periods of heating and cooling cycles, especially in colder climates! The coolant itself can degrade or become contaminated, leading to potential corrosion or freezing issues. Finally, thermostats and sensors can fail completely, preventing proper cooling and/or coolant temperature readings to become inaccurate.

To make sure you are not left stranded on the side of the road with an overheated engine, we have put together this Basic Cooling System Service kit. This kit contains all of the most-likely-to-fail components, giving you peace of mind knowing your engine will continue to run cool for another 60,000+ miles.

See kit contents below for all included components.

Liqui Moly is an official sponsor of Turner Motorsport. We work closely with Liqui Moly to ensure your BMW is receiving optimal lubrication! Select your vehicle to make sure you are viewing the best Liqui Moly options for your application.

Liqui Moly Synthoil is a modern, fully synthetic top-of-the-line motor oil that provides quick oil delivery throughout the engine during cold-start and optimum lubrication with maximum protection under all operating conditions. Beneficial for increased engine life in high tech engines.

Includes: 9 Liters of Liqui Moly Synthoil 0w-40 Engine Oil Hengst Oil Filter Kit OEM Drain Plug & Washer

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Often an oversight in maintenance, ignition components are also susceptible to wear and tear. Spark Plugs can accumulate carbon, reducing the spark intensity and it's ability to properly ignite the air/fuel mixture, leading to misfires and generally declining performance. Other ignition components, such as coils, boots, wires, caps, and rotors, can also wear out over time due to factors like heat and contamination, preventing the current from reaching the spark plug.

To start over fresh with all new components, we now offer these Ignition Service Kits. Each kit comes with brand new OE quality components, replacing any potential fault points in your ignition system for peak performance!

See kit contents below for a complete list of included components.

Don't buy into the hype that your car is maintenance-free! It was only free during the BMW warranty period, which simply deferred maintenance. Take charge of the care and servicing of your investment and it will reward you in driving pleasure and in your bank account. Using a preventative service schedule will not only keep your BMW running like new, but will also prevent a more costly repair and inconvenience in the future. Not to mention, complete and thorough maintenance records can add hundreds or thousands to a selling price of a used car and give a buyer unmatched piece-of-mind.

Our approach to servicing and caring for newer BMW models is not radically different than when we opened nearly twenty years ago. The design and materials of some components have changed but that only affects WHEN you should replace something, not IF. Through our own Service Department, and thousands of sales annually, we have put together packages for your newer BMW model that will reinject some life into your car and keep it performing at its peak. We use Original Equipment (OE) or Original Equipment Manufacturer (OEM) parts that we have trusted since we opened in 1993. In some cases, we recommend a performance alternative part that we have found works better, or resolves a design flaw, with the original. So you get top quality parts, first-rate service, and unbeatable expertise.

The LL-01 BMW oil specification marks stringent requirements from BMW that oil must meet in order to receive this approval rating. Still used today in many BMW NA and Turbo engines, LL-01 TwinPower Turbo 5w-30 and all LL-01 approved oils are great for ensuring proper wear protection and low fuel consumption, even during high oil change intervals. When BMW LL-04 oil was developed, it was not approved at the time for use in the US. This was due to the high sulfur and ethanol content in US fuels. Originally used mostly for diesel engines and euro motors, LL-04 demand is now starting to pick up with changes in US fuels such as lower sulfur content since 2014 and thanks to LL-04 and LL-01 being interchangeable/compatible. The slight advantage of LL-04 over LL-01 is due to LL-04's higher ZDDP levels and HTHS ratings. This allows for increased engine protection at higher temperatures and engine pressures. In addition, LL-04 also has a lower SAPS level which benefits direct-injection engines, including all BMW turbo engines since 2007.

5,000 Mile Oil Service

(click to expand)

• engine oil change with filter, using OE BMW 5W30 or Motul
• replace drain bolt crush washer
• reset oil service/maintenance indicator
• inspect and top off any other fluids

Annual Service

(click to expand)

• air filter cleaning or replacement
• MAF/airflow sensor cleaning
• A/C microfilter/cabin filter replacement
• brake fluid flush/bleeding
• top off power steering fluid (make sure you use the correct Pentosin fluid!)
• wiper blade replacement
• lubricate door hinges and treat rubber door seals
• inspect spare tire or tire repair kit, and tire-changing tools
• inspect drive belt for cracking or stretching
• inspect intake boots and vacuum lines for cracks
• inspect brake system for pad wear, rotor wear, parking brake operation, and brake pedal pressure
• inspect bushing and ball joints for excess play/movement
• ensure the cooling systems are functioning correctly (hoses and thermostat, thermostat housing, auxiliary fan, A/C system, etc)

40,000 Mile Major Service

(click to expand)

• spark plug replacement
• ignition coil and coil boot inspection and replacement
• inspect spark plug cavity in valve cover for leaking valve cover gasket
• engine oil change with filter, using OE BMW 5W30 or Motul
• reset oil service/maintenance indicator
• air filter replacement or cleaning for aFe/K&N type
• fill and bleed cooling system
• manual transmission fluid change, using Red Line ATFD6 or Genuine BMW MTF-LT-3
• differential fluid change, using Red Line 75/90 or Motul Gear300
• brake fluid flush/bleeding
• serpentine belt replacement
• inspect belt roller pulleys (drag and rotation) and belt tensioners
• complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear suspension arm bushings, rear upper shock mounts, rear subframe mounts, axle shaft boots
• complete brake system test and inspection
• engine and transmission leak detection and diagnosis
• shifter linkage, driveshaft guibo, CV, and center support bearing inspection
• exhast system inspection, including hanger replacement

80,000 Mile Major Service

(click to expand)

• spark plug replacement
• ignition coil and coil boot inspection and replacement
• inspect spark plug cavity in valve cover for leaking valve cover gasket
• engine oil change with filter, using OE BMW 5W30 or Motul
• reset oil service/maintenance indicator
• air filter replacement or cleaning for aFe/K&N type
• fill and bleed cooling system
• manual transmission fluid change, using Red Line ATFD6 or Genuine BMW MTF-LT-3
• differential fluid change, using Red Line 75/90 or Motul Gear300
• brake fluid flush/bleeding
• fuel filter, pressure regulator replacement
• serpentine belt replacement
• replace belt roller pulleys and belt tensioners
• complete chassis inspection, including: front control arms, tie rods, ball joints, wheel bearings, rear suspension arm bushings, rear upper shock mounts, rear subframe mounts, axle shaft boots
• complete brake system test and inspection
• engine and transmission leak detection and diagnosis
• shifter linkage, driveshaft guibo, CV, and center support bearing inspection
• exhast system inspection, including hanger replacement
• water pump and thermostat inspection or replacement. The water pump on this car is electric and will not display warning signs of impending failure. The output of the water pump can be tested however, and your local full-service BMW repair shop should have the diagnostic tools to perform this test.

You may also want to pick up these other helpful items:

• E90 Bentley Service Manual (not specific to the 1-series but still very helpful)
• We offer many DIY-related tools, specifically for the 135i owner -
  drain plug sockets, fluid suction and bleeder pumps, spark plug sockets and install guides, oil filter cap adapter, oil funnels, and more!
• SprintBooster throttle enhancement
  
• This package fits the following BMWs:
  2008-2012 E82 BMW 135i
  2008-2012 E88 BMW 135i Convertible
  
  
  
  Put a check in the boxes next to the items you wish to order.