Find Parts That Fit Your Vehicle

Emissions System

Is your BMW throwing emissions related codes? While we're primarily a BMW performance parts house, we understand the importance of maintaining your emissions system to pass inspection in your area and keep your check engine light off. Pick up your emissions related parts from Turner Motorsport.

Sub-Categories

Sort By:

Schwaben 7/8"(22mm) Flexible Oxygen Sensor Wrench
10X Entries Into Our F80 M3 Sweepstakes
Schwaben - Corporate Logo
T#:368923
Part#: FO-78
In Stock
Sale - Save 25% $ 48.99

This product was last offered at the strikethrough price on
05-02-2026

$ 36.74 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 48.99

This product was last offered at the strikethrough price on
05-02-2026

$ 36.74 USD
Free Shipping on orders $49 and up
The Schwaben oxygen sensor wrench has a six-point pivot head to provide a secure grip on stubbornly tight oxygen sensors located in awkward, inaccessible locations.
Bosch - Corporate Logo
T#:596888
Part#: 11787848487
In Stock
$ 194.99

This product was last offered at the strikethrough price on
07-14-2026

$ 192.98 USD
Free Shipping
$ 192.98 USD
Free Shipping

Ensure optimal performance in your BMW S55 M3/M4 with the Bosch Oxygen Sensor. This sensor is designed to deliver accurate readings of oxygen levels in the exhaust gases, allowing for precise fuel-air mixture control. Bosch, a trusted name in automotive parts, ensures reliability and durability in their oxygen sensors, making it an ideal choice for BMW enthusiasts.

  • Ensures accurate readings of oxygen levels
  • Facilitates precise fuel-air mixture control
  • Trusted Bosch quality and reliability
  • Compatible with S55 M3/M4 engines
Show More Show Less
Bosch - Corporate Logo
T#:18468288
Part#: 13907643106
In Stock
Sale - Save 5% $ 76.99

This product was last offered at the strikethrough price on
05-03-2026

$ 73.14 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 76.99

This product was last offered at the strikethrough price on
05-03-2026

$ 73.14 USD
Free Shipping on orders $49 and up
Common CEL cause on B48/B58/S58. Get your fuel system functioning properly again!

Febi-Bilstein "Cold Climate" CCV Kit - 11617533400S1
We Price Match - Give Us A Call or Chat!
Febi - Corporate Logo
T#:28304463
Part#: 11617533400S1
In Stock
$ 238.99

This product was last offered at the strikethrough price on
04-15-2026

$ 179.99 USD
Free Shipping on orders $49 and up
$ 179.99 USD
Free Shipping on orders $49 and up

After the introduction of the M52TU/M54 engines, BMW observed an uptick in CCV-related issues, especially in cold regions. Vehicles operating in extremely low temperatures often encountered a blockage in the CCV dipstick hose, leading to elevated crankcase pressure and visible blue smoke from the exhaust. To address this issue, BMW introduced cold climate-specific hoses with foam insulation, preventing condensation and facilitating quicker oil warm-up. This kit incorporates top-notch reproduction cold climate hoses to ensure optimal CCV performance across all weather conditions.

The crankcase ventilation valve, known as the oil separator, PCV, CCV, or crankcase pressure regulator valve, plays a vital role in redirecting oil from your vehicle's intake system back into the engine oil pan. This system comprises numerous plastic and rubber hoses, prone to damage due to prolonged exposure to chemicals and heat.

Designed to tackle or prevent impending CCV system failures, this kit includes four foam-insulated hoses made from durable plastic capable of withstanding heat fluctuations and chemical exposure. Additionally, a new ventilation valve is included for a comprehensive and long-lasting repair solution.

Signs indicating the need for crankcase ventilation system replacement include:

Whistling sounds from the intake manifold, caused by crankcase pressure venting through holes in the CCV hoses. Blue smoke emitting from the tailpipe, indicating oil consumption. Excessive oil usage. Milky or yellowish buildup under the oil cap, suggesting condensation due to ventilation valve malfunction. If you're experiencing misfires, lean fuel codes, decreased fuel efficiency, or noticeable oil consumption, it's advisable to overhaul your crankcase ventilation system. Opt for this reliable system from Febi-Bilstein for a repair that meets factory standards and ensures consistent performance.

Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:389684
Part#: VTT-N54-PCV
In Stock
$ 68.99 USD
Free Shipping on orders $49 and up
The crankcase oil vent system on the N52/N54 is one of its weakest and cheaply designed systems. We see crankcase vent issues on even stock engines but with more boost the problems are exponential. This Vargas upgraded PCV valve, and an oil catch can, are what the N54 engine needs and may alleviate most of your oil and boost leak issues. The PCV valve is supposed to let oil either return to the oil pan or pass through the intake manifold and get burned up in the combustion chamber. However, BMW used a weak plastic vent valve that doesn't seal well when under boost. Instead of  closing and venting the oil out of the intake, it's forced through this valve and into the intake and coating your valves with oil residue and carbon. Most boost equals more oil forcing its way by. This upgraded N54 PCV valve uses higher grade materials, including aluminum, to provide a better seal and prevent oil from entering the intake. It's an easy install and a must-have item when considering any turbo work.
Show More Show Less
VTT Gen-1 PCV CAP - B58
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:4813265
Part#: VTT-B58-PCV-CAP
Ships in 9 Business Days
$ 149.99 USD
Free Shipping
$ 149.99 USD
Free Shipping
Vargas has developed a solution to problematic PCV systems! Stock diaphragms on the gen-1 B58 Valve cover are fragile and can crack or tear over time. This can cause loss of crankcase vacuum and smoking. The VTT PCV cap replaces the factory plastic cap with a billet aluminum piece which uses a Billet Banjo fitting, and VTT's Vaccum/Boost adapter to move vacuum directly from the head ports to the manifold. This cap will also allow you to run a catch can on the low side if desired. VTT Recommends using this cap alongside their High Side Catch Can and crankcase breather for maximum efficiency. Installation is as simple as popping the stock cap off, removing the diaphragm, and placing the VTT components in place. Kit Includes: One Billet PCV Cap One Billet Banjo Fitting One Vaccum/Boost adapter One line with built-in check valve
Show More Show Less

Genuine BMW - Corporate Logo
T#:7365
Part#: 16121177553
In Stock
2% off MSRP $ 55.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 54.99 USD
Free Shipping on orders $49 and up
2% off MSRP
$ 55.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 54.99 USD
Free Shipping on orders $49 and up


Genuine BMW Hose - 14X20X1340

This item fits the following BMW Chassis:
E30 M3,E30

Fits BMW Engines including:
M10,M20,M42,S14

Genuine BMW - Corporate Logo
T#:32279
Part#: 11157559528
Ships in 1-2 days
5% off MSRP $ 108.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 103.99 USD
Free Shipping
5% off MSRP
$ 108.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 103.99 USD
Free Shipping
This valve cover vent hose helps to vent the crankcase fumes on BMW's with the N51 / N52 6 cylinder engines. If replacing the the valve cover we recommend purchasing this item as well as it often will break while removing it from the valve cover.

This item fits the following BMWs:
2008-2013 E82 BMW 128i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2013 E93 BMW 328i - Convertible
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive
2006-2010 E83 BMW X3 3.0i X3 3.0si
2007-2013 E70 BMW X5 3.0si X5 xDrive30i
2006-2008 E85 BMW Z4 3.0i Z4 3.0si
2009+ E89 BMW Z4 sDrive30i
Show More Show Less

Pierburg - Corporate Logo
T#:47164963
Part#: 11781427884
In Stock
$ 223.31

This product was last offered at the strikethrough price on
04-17-2026

$ 210.20 USD
Free Shipping on orders $49 and up
$ 210.20 USD
Free Shipping on orders $49 and up
A new oxygen sensor set can improve driveability and lengthen engine life. Ultimately, you achieve a smoother running engine that is more fuel efficient. Feedback from the oxygen sensors provides closed-loop control of the injected quantity of fuel for optimum air-fuel mixture, enabling virtually complete combustion to take place. Contaminants in gas and certain atmospheric conditions can drastically shorten the life of any oxygen sensor, therefore they should be checked with every periodic maintenance and changed if necessary. Sold separately, but four sensors are required. Fits E36 front and rear, M Roadster / Coupe front to 2000. Bosch Part # 13 884. Also replaces 11781437943. This item fits the following BMWs: 1996-1999 E36 BMW 323is 323ic 328i 328is 328ic M3 1997-1998 E39 BMW 528i 1998-2002 Z3 BMW Z3 M Roadster M coupe
Show More Show Less

Crankcase Ventilation Hose
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:35357256
Part#: 11157848340
In Stock
Sale - Save 15% $ 59.99

This product was last offered at the strikethrough price on
08-25-2026

$ 50.99 USD
Free Shipping on orders $49 and up
Sale - Save 15%
$ 59.99

This product was last offered at the strikethrough price on
08-25-2026

$ 50.99 USD
Free Shipping on orders $49 and up
Burger Motorsports - Corporate Logo
T#:581123
Part#: OCCN55
In Stock
$ 199.00 USD
Free Shipping
$ 199.00 USD
Free Shipping
It's no secret that N55 BMW turbo motors can suffer from oil control problems causing oil to blow through and coat the intercooler and charge piping, gunking up intake valves and the VANOS system, lowering the effective octane, and generally degrading engine performance. The higher your boost levels the more apparent these problems become. The solution to this problem has finally arrived. The BMS oil catch can. While there are other catch cans on the market they all fall short in various areas. Some are mounted on the hot/turbo side of the motor preventing proper vapor condensation. Others utilize hoses that are too small and runs that are too long to allow proper PCV ventilation causing internal motor/ring sealing issues. Some have insufficient or no internal baffle system while others have internal baffles systems that are too restrictive. Some even bypass the PCV system all together venting crankcase gas and odor to the atmosphere. Most are simply repackaged oil catch cans from smaller / lower power motors shoehorned into place in the turbo BMW engine bay. To solve these problems BMS designed their oil catch can kit from the ground up specifically for the turbo BMW application. It features 100% CNC machining with zero welding for a precision fit and long life. The can itself is guaranteed for the life of the vehicle. The hoses exceed the OEM PCV piping in diameter and that flow rate is maintained throughout the entire oil catch can ensuring no excessive crankcase pressure buildup. The BMS OCC retains the factory fully closed loop PCV operation preventing any PCV vapor from leaking to the atmosphere. The mounting locations are selected to minimize the line length, allow more efficient operation, and retain a stealth look. Install takes around 20 minutes, includes all required hardware, and is 100% reversible. Simply unscrew the base of the can or use the drain plug to safely dispose of captured oil with the rest of your used motor oil during oil changes. Made in the USA. FEATURES AND BENEFITS Increases Air Intake Efficiency Promotes Engine Longevity Non-Clogging Air/Oil Separation Double Baffle Free Flow Solid No Restriction Design Retains factory fully closed loop PCV operation Large Intake/Outlet No Tapering Down Stealth Mounting on Cool Side of the Motor Anodized Black Aluminum Made in USA & Guaranteed for Life Simply unscrew base every 3-6 months to empty or use the 1/8th NPT drain plug. Non-Clogging, No Service Needed Air/Oil Separation Double Baffle High flow to eliminate crankcase pressure caused by more restrictive designs Large 16mm+ inlet and outlet exceeds OEM PCV sizing Precision CNC Machined from Solid Blocks of High-Grade Aluminum
Show More Show Less


MTC - Corporate Logo
T#:556608
Part#: 11618638014
In Stock
$ 39.99 USD
Free Shipping on orders $49 and up
Being not only a connecting piece for the PCV line to the intake manifold but a heating element to prevent blockage it is possible to short out this piece. Easy to replace, prevent damage by getting a new piece today.
Show More Show Less
CCV Hose
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:51391238
Part#: 11127850244
In Stock
Sale - Save 8% $ 99.99

This product was last offered at the strikethrough price on
05-03-2026

$ 91.79 USD
Free Shipping on orders $49 and up
Sale - Save 8%
$ 99.99

This product was last offered at the strikethrough price on
05-03-2026

$ 91.79 USD
Free Shipping on orders $49 and up
Bosch - Corporate Logo
T#:2995
Part#: 11781405324
In Stock
$ 117.99 USD
Free Shipping
$ 117.99 USD
Free Shipping
This is the pre-cat oxygen sensor for cylinders 4-6 for BMW E46 M3.Bosch # 13 952.

This item fits the following BMWs:
2001-2006 E46 BMW M3 M3 convertible
2001-2002 Z3 BMW M Roadster M Coupe
Show More Show Less

Bremmen Oil Separator Kit - Level 1 - E39 E46 E83 Z3 Z4
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:641646
Part#: 11617501566S1
Ships in 8 Business Days
Sale - Save 15% $ 95.99

This product was last offered at the strikethrough price on
05-03-2026

$ 81.59 USD
Free Shipping
Sale - Save 15%
$ 95.99

This product was last offered at the strikethrough price on
05-03-2026

$ 81.59 USD
Free Shipping
BMW has an ongoing issue with oil separators freezing in cold weather if driving is done before the vehicle is fully warmed up. There is often a howling noise followed by numerous oil leaks. The crankcase breather valve is used to purge the oil vapor from the engine block into the valve cover. However, sometimes condensation can cause it to freeze, causing the entire oil separator system to fail, crack, and disintegrate. Replace all the components of the oil separator system together to prevent damage to all the aspects of your engine. Level 1 kit includes the following; Oil separator Hose from oil separator to dipstick tube Hose from oil separator to valve cover Hose from intake manifold back to the connector hose Hose from oil separator up to the intake manifold
Show More Show Less

Genuine BMW - Corporate Logo
T#:31520
Part#: 11127588417
In Stock
5% off MSRP $ 72.41

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 68.65 USD
Free Shipping on orders $49 and up
5% off MSRP
$ 72.41

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 68.65 USD
Free Shipping on orders $49 and up


Genuine BMW Vent Hose -
This item fits the following BMW Chassis:
E89 Z4,F10,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36

Fits BMW Engines including:
N20,N26

Show More Show Less
URO PCV Breather Hose Kit - E39, E46, E83
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:592719
Part#: BMM54PCVKIT
In Stock
$ 117.99 USD
Free Shipping
$ 117.99 USD
Free Shipping
Comes with everything needed to refresh the PCV System!

Genuine BMW - Corporate Logo
T#:14624
Part#: 11617831930
In Stock
2% off MSRP $ 127.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 124.99 USD
Free Shipping
2% off MSRP
$ 127.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 124.99 USD
Free Shipping

Vents gases from the crankcase back into the intake.
When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.


Genuine BMW Vent Hose
This item fits the following BMW Chassis:
E46 M3,E85 Z4M,E46,E85 Z4,E86 Z4

Fits BMW Engines including:
S54
 

 

Show More Show Less
Bosch - Corporate Logo
T#:596889
Part#: 11787848486
In Stock
$ 222.65

This product was last offered at the strikethrough price on
04-16-2026

$ 177.99 USD
Free Shipping
$ 177.99 USD
Free Shipping

Febi - Corporate Logo
T#:28337855
Part#: 11151703484KIT
Ships in 2 Business Days
$ 108.14 USD
Free Shipping on orders $49 and up

Rubber breather pipes in various BMW applications are susceptible to cracking. Over time, engine heat and weather conditions can weaken these hoses, leading to breaks or leaks. This results in significant vacuum leaks that can severely affect engine performance.

Moreover, BMW faces a problem with oil separators freezing in cold weather, particularly if the engine isn't adequately warmed up during driving. Typical signs include a howling noise and subsequent oil leaks.

Show More Show Less

Crankcase Ventilation Valve With Gasket
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:48125820
Part#: 11127809512
Ships in 8 Business Days
Sale - Save 21% $ 61.99

This product was last offered at the strikethrough price on
05-03-2026

$ 48.95 USD
Free Shipping on orders $49 and up
Sale - Save 21%
$ 61.99

This product was last offered at the strikethrough price on
05-03-2026

$ 48.95 USD
Free Shipping on orders $49 and up

Restore proper engine ventilation with this premium replacement Crankcase Breather Valve (11127809512).

Designed to match the performance of the original BMW unit (OE 11-12-7-809-512 / 11-12-7-803-790), this valve maintains correct crankcase pressure, helps prevent oil buildup, and supports clean, efficient engine operation.

Crafted from high-quality, long-lasting materials and shaped to replicate the factory design, it installs easily in place of the stock breather without any modifications required.

Whether you’re addressing pressure-related drivability issues, refreshing your engine’s ventilation system, or performing preventative maintenance, this breather valve provides dependable performance and protects your BMW’s engine for the long haul.

Show More Show Less
Mishimoto - Corporate Logo
T#:597051
Part#: MMOCCLA
In Stock
$ 127.99 USD
Free Shipping
$ 127.99 USD
Free Shipping
WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less
Genuine BMW - Corporate Logo
T#:222883
Part#: 13907643106
In Stock
2% off MSRP $ 131.17

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 128.65 USD
Free Shipping
2% off MSRP
$ 131.17

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 128.65 USD
Free Shipping
Genuine Bmw Fuel Tank Breather Valve - 13907643106


URO - Corporate Logo
T#:9126159
Part#: 11787558087
In Stock
$ 96.29 USD
Free Shipping
$ 96.29 USD
Free Shipping
This direct fit OEM Bosch oxygen sensor plugs directly into your factory connector. Fits N54 engine 1 series, 3 series and Z4. No cutting or splicing required. A new oxygen sensor can improve drivability and lengthen engine life.
Show More Show Less
Rein - Corporate Logo
T#:402034
Part#: 11157646087
In Stock
$ 53.99 USD
Free Shipping on orders $49 and up
Connects to the valve cover over cylinders 1-4. These pipes tend to crack after become brittle from numerous heating and cooling cycles. If this happens, OEM Rein pipes are a perfect replacement to restore a tight seal and prevent any check engine codes.
Show More Show Less
Bosch - Corporate Logo
T#:3303
Part#: 11787523434
In Stock
$ 210.65

This product was last offered at the strikethrough price on
05-02-2026

$ 203.99 USD
Free Shipping
$ 203.99 USD
Free Shipping
This is the pre-cat oxygen sensor for bank 1 - cylinders 1-3 for BMW E46 E60 E83 X3 Bosch # 17 215.

This item fits the following BMWs:
3/2003-2005 E46 BMW 325i 325ci 325xi with M54 engine.
3/2003-2005 E46 BMW 330i 330ci 330xi
2004-2005 E60 BMW 525i 530i
2004-2006 E83 BMW X3 3.0i - Automatic Transmission Only
Show More Show Less

Fuel Tank Ventilation Valve Pipe
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:8677197
Part#: 13907618643
In Stock
Sale - Save 15% $ 52.99

This product was last offered at the strikethrough price on
09-11-2026

$ 45.00 USD
Free Shipping on orders $49 and up
Sale - Save 15%
$ 52.99

This product was last offered at the strikethrough price on
09-11-2026

$ 45.00 USD
Free Shipping on orders $49 and up
Allows fuel fumes to vent into the engine's intake

Bosch - Corporate Logo
T#:2991
Part#: 11781716156
Ships in 1 Business Day
$ 147.18

This product was last offered at the strikethrough price on
05-11-2026

$ 130.50 USD
Free Shipping
$ 130.50 USD
Free Shipping
This direct fit Bosch oxygen sensor plugs directly into your factory connector. No cutting or splicing required. A new oxygen sensor can improve driveability and lengthen engine life. Ultimately, you achieve a smoother running engine that is more fuel efficient. Feedback from the oxygen sensor provides closed-loop control of the injected quantity of fuel for optimum air-fuel mixture, enabling virtually complete combustion to take place. Contaminants in gas and certain atmospheric conditions can drastically shorten the life of any oxygen sensor, therefore they should be checked with every periodic maintenance and changed if necessary It fits BMW E23 E24 E28 E30. Bosch # 13 049.

This item fits the following BMWs:
1984-1988 E30 BMW 325e 325es
1985-1988 E28 BMW 535i 535is
1985-1987 E24 BMW 635csi
1985-1986 E23 BMW 735i
Show More Show Less
Genuine BMW - Corporate Logo
T#:376859
Part#: 11151703484KT1
Ships in 1-2 days
$ 191.99

This product was last offered at the strikethrough price on
10-05-2026

$ 187.99 USD
Free Shipping
$ 187.99 USD
Free Shipping

The plastic hoses and oil separator can crack or become faulty, leading to vacuum leaks or oil leaks. This is caused by the stress the plastic components are exposed to during heating and cooling cycles, especially if the vehicle is not brought up to operating temperature during driving in cold weather climates.

This kit includes the needed hoses, oil separator, mounting grommet, and hardware.

Fits the following BMWs:
1996-1999 E36 BMW 323is/ic 328i/is/ic M3
1996-08/1998 E39 BMW 528i
1996-2000 Z3 BMW with M52/S52

Show More Show Less

VDO - Corporate Logo
T#:5973262
Part#: 323-055
In Stock
$ 36.99 USD
Free Shipping on orders $49 and up
Performance Oil Separator Kit - M52/S52
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:51356040
Part#: 059015LA02KT2KT
In Stock
Sale - Save 19% $ 104.99

This product was last offered at the strikethrough price on
05-03-2026

$ 85.28 USD
Free Shipping on orders $49 and up
Sale - Save 19%
$ 104.99

This product was last offered at the strikethrough price on
05-03-2026

$ 85.28 USD
Free Shipping on orders $49 and up

On M52/S52-equipped BMWs, the factory crankcase ventilation (CCV) system is a notorious weak link. Between brittle plastic corrugated hoses that crumble from heat soak and an internal cyclone diaphragm prone to tearing, a failing CCV leads to massive oil consumption, vacuum leaks, and that dreaded "howling" whistle.

This kit addresses these issues with all new components and hardware. Both oil separator hoses, the cyclone separator itself, the mounting grommet, and the retaining bolts are included. Servicing this system is guaranteed to restore performance lost as a result of worn CCV components.

Kit includes:

Cyclone Separator/Crankcase Pressure Regulator Valve High Performance Silicone Breather Hose Return Hose Mounting Grommet Hex Bolt (3)

Show More Show Less

Rein - Crank Case Vent Hose - F10 M5, F12 M5, F13 M6
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:26404796
Part#: 11157843151
Back Ordered
$ 32.99 USD
Free Shipping on orders $49 and up

Rein Crank Case Vent Hose is a high-quality replacement part designed to enhance the performance and longevity of your vehicle’s engine. Manufactured by Rein Automotive, this vent hose is built to withstand high pressures and temperatures, ensuring reliable crankcase ventilation. Engineered for a precise fit, it helps prevent harmful oil vapors from entering the intake manifold, improving overall engine efficiency. Available at Turner Motorsport, this vent hose is an ideal choice for drivers looking to maintain their vehicle’s performance and emissions standards.

  • Designed for optimal crankcase ventilation, improving engine performance
  • Reduces oil vapor contamination in the intake system, protecting engine components
  • Made with durable materials to resist wear from heat and pressure
  • Ensures precise fit and easy installation as a direct OEM replacement
  • Helps reduce harmful emissions, supporting cleaner engine operation

Turner Motorsport offers the Rein Crank Case Vent Hose as a dependable solution to keep your engine running smoothly while meeting emissions regulations.

Show More Show Less

Crankcase Vent Hose
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:30629661
Part#: 11157831311
In Stock
Sale - Save 21% $ 30.99

This product was last offered at the strikethrough price on
05-03-2026

$ 24.47 USD
Free Shipping on orders $49 and up
Sale - Save 21%
$ 30.99

This product was last offered at the strikethrough price on
05-03-2026

$ 24.47 USD
Free Shipping on orders $49 and up
Bosch - Corporate Logo
T#:397340
Part#: 11787596924
In Stock
$ 163.84

This product was last offered at the strikethrough price on
05-19-2026

$ 162.15 USD
Free Shipping
$ 162.15 USD
Free Shipping

The oxygen sensor is vital to the performance and drivability of your car. The engine computer relies on data from the sensor to make adjustments in engine efficiency and performance. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today. There is no lifespan on O2 sensors but there are several fault codes that indicate a failed sensor (O2 monitoring, cat efficiency, O2 heating circuit, O2 readiness, and others). The O2 sensor is heated and has a self-calibration feature so once you get the codes or feel performance has suffered, a new sensor is a good starting point to get you back to peak performance. Bosch's Oxygen sensors are high quality and will give you the the longest and best performance for the price.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMW Chassis:
E82,E90,E92,E93,F30,F34

Fits BMW Engines including:
N55 - Up to 08/2013

Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:49822557
Part#: VTTBS58BLOCK
Ships in 9 Business Days
$ 29.99 USD
Free Shipping
$ 29.99 USD
Free Shipping
The VTT B58/S58 Head Port Block-Off kit is designed to either seal off the factory head ports used by the OEM low-side PCV system. These ports in the cylinder head utilize engine vacuum to evacuate crankcase gases, but in the process, can allow oil to enter the intake manifold, leading to valve carbon buildup and other performance issues over time. The Block-Off kit offered by VTT completely seals the factory head ports to prevent oil intrusion and unwanted vacuum leaks. This kit does NOT require any tapping, meaning no metal to get into the engine, etc. You simply tap the plugs into place. Key Features Eliminates oil draw-through into the intake manifold Prevents carbon buildup on intake valves Utilizes precision-machined plugs for boost sealing Fully reversible — Block-offs can be removed if needed No tapping is required. Easy install, by tapping the blocks into place.
Show More Show Less


Rear Oxygen Sensor - Bank 2 Post-Cat
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:35863161
Part#: 11787545075
In Stock
$ 76.99 USD
Free Shipping on orders $49 and up
The oxygen sensor is vital to the performance and drivability of your car. The engine computer relies on data from the sensor to make adjustments in engine efficiency and performance. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today. There is no lifespan on O2 sensors but there are several fault codes that indicate a failed sensor (O2 monitoring, cat efficiency, O2 heating circuit, O2 readiness, and others). The O2 sensor is heated and has a self-calibration feature so once you get the codes or feel performance has suffered, a new sensor is a good starting point to get you back to peak performance.
Show More Show Less
Bosch - Corporate Logo
T#:13332220
Part#: 13907614013
Ships in 1 Business Day
$ 80.58

This product was last offered at the strikethrough price on
06-21-2026

$ 49.87 USD
Free Shipping on orders $49 and up
$ 49.87 USD
Free Shipping on orders $49 and up
Bosch - Corporate Logo
T#:14677
Part#: 11787558073
In Stock
$ 250.99

This product was last offered at the strikethrough price on
04-22-2026

$ 167.75 USD
Free Shipping
$ 167.75 USD
Free Shipping

Bad oxygen sensors can cause check engine lights and poor fuel mileage. Replace your faulty sensor with this high quality Bosch sensor to turn off your check engine light and restore fuel mileage.

This is the OEM Bosch oxygen sensor for BMW's with the N52 engine. This sensor is mounted in the rear downpipe before the catalytic converter. Bosch part number 17099. OEM replacement for BMW # 11787558073 and 11787537984.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


This item fits the following BMWs:
2008-2013 E82 BMW 128i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2013 E93 BMW 328i Convertible
2006-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive
2006-2010 E83 BMW X3 3.0i X3 3.0si
2006-2008 E85 BMW Z4 3.0i Z4 3.0si
2009+ E89 BMW Z4 sDrive30i

Show More Show Less

Burger Motorsports - Corporate Logo
T#:302901
Part#: BCC-N54-135-335
In Stock
$ 179.00 USD
Free Shipping
$ 179.00 USD
Free Shipping

Oil venting and circulation continues to be a problem on BMW engines and now even more so on the turbocharged N54 and N55 engines. The existing stock system does a very poor job of separating fluid and vapor and this leads to an oily film or even small pools of oil throughout the turbos and intake. We're seeing a lot more 135 and 335 cars with drivability and performance issues because oil has sneaked by the ring seals and is coating the intake piping, intercooler, intake valves, and other critical areas. The problem is worsened with higher boost levels. Oil is excellent for lubricating moving parts but terrible when it gets into the combustion chamber, effectively lowering the octane rating and reducing performance. Our own shop has gone the extra step and offers media blasting of the intake valves to strip away the oily buildup we have seen.

Our shop also strongly recommends an oil catch can be installed in the line for the crankcase vent. The oil catch can traps oil as it leaves the valve cover and holds it in a canister. This catch can is located on the cooler side of the engine where the oil will condense easier and stay in the can. Whatever minimal vapors are left over in the oil is then vented back through the canister and into the intake where it is safe to be burned up in the engine or recirculated back through the system again. This is the way the system was designed! At each oil change simply unscrew the canister and empty the trapped oil with your regular used oil. The Burger Tuning oil catch can is the best we have seen so far. Installing one of these will avoid costly repairs in the future and help maintain your boost and performance. It's one of the smartest modifications you can make because it demonstrates a well-thought out tuning strategy and care for the condition of your engine.

The BMS Oil Catch Can is made from aluminum and with a stealthy black anodized finish. It installs on the cooler side of the engine with a dedicated bracket and new oversized vent lines. The location is key as heat will evaporate the oil and send too much vapor back into the engine (where cooler air will turn it back into fluid). The BMS OCC also has a factory-like appearance. Since BMS designed their catch can from scratch they can guarantee it fits and performs correctly for the N54/N55 engine, unlike other catch cans on the market that are poorly retrofitted from other applications and under-sized for the N54 engine.

Note: Since the crankcase vent system is considered part of the overall emissions system, installing this may be a violation of local, state, and federal laws. While exemptions are made for track/race and off-road use, check with your local state inspection facility on using this in street-driven vehicles

BMS Oil Catch Can Features:
+ Increases air intake efficiency
+ Promotes engine longevity
+ Double-baffled design allows excellent air/oil separation
+ Large In/Out ports (no tapered sizes that slow flow)
+ Stealth mounting on cooler side of engine bay (promotes condensation of oil to vapor)
+ Anodized black lightweight aluminum
+ N54 version mounts out of sight under the cowl
+ Made in USA with a lifetime guarantee

Show More Show Less

BMW N63 4.4L Vent Pipe - Each
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:7244416
Part#: 11158647961
In Stock
$ 327.99

This product was last offered at the strikethrough price on
05-04-2026

$ 171.99 USD
Free Shipping
$ 171.99 USD
Free Shipping

BMW N63 4.4L Vent Pipe

The BMW N63 4.4L Vent Pipe addresses common issues with oil separators freezing in cold weather conditions. This problem often occurs if the vehicle is driven before it is fully warmed up, leading to a howling noise and multiple oil leaks. The crankcase breather valve in the vent pipe purges oil vapor from the engine block into the valve cover. However, condensation can sometimes cause the valve to freeze, which may result in the oil separator system failing, cracking, or disintegrating. This replacement vent pipe ensures proper function and prevents costly damage by maintaining the integrity of the oil separator system.

Benefits:

  • Prevents Freezing Issues: Reduces the risk of oil separator failure in cold weather conditions.
  • Eliminates Oil Leaks: Helps prevent leaks caused by frozen oil separators.
  • Ensures Proper Ventilation: Maintains effective purging of oil vapor from the engine block.
  • Durable Construction: Built to withstand harsh weather conditions and engine stress.
  • Direct Replacement: Designed to fit seamlessly with BMW N63 4.4L engines.
Show More Show Less
Rein Crankcase Ventilation Return Pipe - E60, E90, Z4
2X Entries Into Our F80 M3 Sweepstakes
Rein - Corporate Logo
T#:402081
Part#: 11157567801
In Stock at Vendor
$ 81.38

This product was last offered at the strikethrough price on
08-13-2026

$ 78.99 USD
Free Shipping
$ 78.99 USD
Free Shipping
Located under intake manifold

Radium Engineering - Corporate Logo
T#:577808
Part#: 20-0373
In Stock
$ 259.99 USD
Free Shipping
$ 259.99 USD
Free Shipping
Oil catch cans prevent elevated oil blow by caused by aggressive driving. The Radium Engineering catch can uses a closed loop system and is emissions and track legal, and by not venting to atmosphere avoids any oil smells from getting into the cabin. Kit includes Billet catch can Mounting bracket 10AN hose fittings and adapters 5/8" PCV hose Mounting hardware
Show More Show Less
Genuine BMW - Corporate Logo
T#:180985
Part#: 11157848155
Ships in 1-2 days
2% off MSRP $ 479.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 469.99 USD
Free Shipping
2% off MSRP
$ 479.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 469.99 USD
Free Shipping
This is a genuine BMW replacement crankcase pressure regulator valve that is attached to the top of the valve covers. This is often also referred to as an oil separator.

Genuine BMW - Corporate Logo
T#:528022
Part#: 11157848340
Ships in 1-2 days
5% off MSRP $ 125.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 119.99 USD
Free Shipping on orders $49 and up
5% off MSRP
$ 125.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 119.99 USD
Free Shipping on orders $49 and up
This ventilation connecting pipe guides the gases in the PCV system back into the valve cover. Plastic pipes exposed to constantly varying temperatures tend to become weak and crack over time. If yours has split, it may allow gases to escape possibly resulting in poor fuel economy, engine misfires, hissing noises under the hood, and will usually cause the check engine light to illuminate.
Show More Show Less

URO Fuel Tank Vent Valve - 13907643106
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:50031887
Part#: 13907643106
In Stock
$ 44.99 USD
Free Shipping on orders $49 and up
Replaces broken or failing vent valve.
Oxygen Sensor - Downstream Catalytic Converter
10X Entries Into Our F80 M3 Sweepstakes
Bremmen Parts - Corporate Logo
T#:27105147
Part#: 11787589475
In Stock
Sale - Save 15% $ 130.99

This product was last offered at the strikethrough price on
09-16-2026

$ 111.34 USD
Free Shipping on orders $49 and up
Sale - Save 15%
$ 130.99

This product was last offered at the strikethrough price on
09-16-2026

$ 111.34 USD
Free Shipping on orders $49 and up
Genuine BMW - Corporate Logo
T#:13043
Part#: 11727831039
In Stock
2% off MSRP $ 41.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 40.99 USD
Free Shipping on orders $49 and up
2% off MSRP
$ 41.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 40.99 USD
Free Shipping on orders $49 and up


Genuine BMW Pressure Hose Assy
This item fits the following BMW Chassis:
E46 M3,E46

Fits BMW Engines including:
S54



Bosch - Corporate Logo
T#:374247
Part#: 11787545075
In Stock
$ 137.99

This product was last offered at the strikethrough price on
04-25-2026

$ 137.64 USD
Free Shipping
$ 137.64 USD
Free Shipping

The oxygen sensor is vital to the performance and drivability of your car. The engine computer relies on data from the sensor to make adjustments in engine efficiency and performance. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today. There is no lifespan on O2 sensors but there are several fault codes that indicate a failed sensor (O2 monitoring, cat efficiency, O2 heating circuit, O2 readiness, and others). The O2 sensor is heated and has a self-calibration feature so once you get the codes or feel performance has suffered, a new sensor is a good starting point to get you back to peak performance. Bosch's Oxygen sensors are high quality and will give you the longest and best performance for the price.

This is the OEM Bosch oxygen sensor for BMW's with the N52, N54, and N55 3.0L engines. This 490mm bank 2 oxygen sensor is mounted after the catalytic converter.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
Bav Auto Crankcase Pressure Regulator Valve - BMW M52 M54
10X Entries Into Our F80 M3 Sweepstakes
Bavarian Autosport - Corporate Logo
T#:640207
Part#: 11617501566
In Stock
Sale - Save 20% $ 32.99

This product was last offered at the strikethrough price on
05-03-2026

$ 26.39 USD
Free Shipping on orders $49 and up
Sale - Save 20%
$ 32.99

This product was last offered at the strikethrough price on
05-03-2026

$ 26.39 USD
Free Shipping on orders $49 and up
BMW has an ongoing issue with oil separators freezing in cold weather if driving is done before the vehicle is fully warmed up. There is often a howling noise followed by numerous oil leaks. The crankcase breather valve is used to purge the oil vapor from the engine block into the valve cover. However, sometimes condensation can cause it to freeze, causing the entire oil separator system to fail, crack, and disintegrate. Replace this and all the other components of the oil separator system to prevent damage to all the aspects of your engine. As long as you have everything off, you can rest assured that new parts will last and be reliable. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.
Show More Show Less