Packaged by Turner BMW Suspension Parts

Is your BMW's suspension feeling loose and imprecise? It might be time for a refresh, and the team at Turner Motorsport has just the solution. Our front control arm refresh kit bundles all the essential components you need to restore your vehicle's handling and ride quality.

Why choose our kit? Because we understand the wear and tear that your BMW endures over time. Rough roads and harsh conditions take a toll on your suspension. With our comprehensive kit, you can address the common wear points in one go, ensuring optimal performance and longevity.

What's included in our kit? Everything you need: control arms, bushings, hardware, and more. By replacing these components together, you eliminate the risk of new parts being compromised by old, worn ones. Don't let sloppy handling and vague steering ruin your driving experience. Trust Turner Motorsport to provide a complete solution that restores the precision and feel of your BMW's suspension.

Signs that your front control arms may need replacing:

Clunking noise over rough roads Vague steering, especially at highway speeds Irregular tire wear Popping noises when going over bumps Vehicle pulling to one side during hard braking Don't wait for these symptoms to worsen. Upgrade your BMW's suspension with this front control arm refresh kit today.

Eliminate the most common sources of suspension slop with our all new Turner Suspension Refresh Kits that feature only OEM parts! We do not include any "cheap parts" in our refresh kits to ensure long-lasting reliability and noise-free suspension.

This Level 1 kit replaces:

Control Arms w/ Bushings
Control Arm Brackets w/ M3 Control Arm Bushings

Stay planted in the corners with this 328i and 335i suspension upgrade. The stock suspension does well to deliver comfort and control. But our E92 customers demand more and this H&R and Bilstein package is a step above the stock, delivering less bodyroll, better balance, and improved stance, and without sacrificing ride quality.

H&R Sport springs lower the ride height as much as 1.3" in front and 1.2" in the back and stiffens the spring rate. Both combine to lower the car's center of gravity and reduce the amount of bodyroll in corners. The springs are progressive rate so their initial stiffness is actually very compliant and it becomes stiffer as the spring is compressed. This is great for street cars that see bumps and potholes where suspension compliance is key. Overall, they are about 30% stiffer than the stock original springs. Lowering amount will be less if replacing the factory sport suspension.

We use Bilstein B8 shocks as the dampers and they feature Bilstein's patented and innovative valving system. With this system, small bumps and impacts are absorbed as they should be. But the shocks stiffen for cornering and other suspension motions. It's the best of both worlds as the shock self-adjusts based on suspension motion. Bilstein HD shocks work with these shorter springs because the only change Bilstein makes is a slightly longer shock. These fit with the stock strut and shock mounts, making for an easy and clean install.

Parts list:

• 1 set - H&R Sport Springs (50490-3)
• 1 - Bilstein Left Front Sport strut (35-120407)
• 1 - Bilstein Right Front Sport strut (35-120414)
• 1 pair - Bilstein Rear Sport Shocks (BE5-C042)

• This item fits the following BMWs:
  2007-2012 E92 BMW 328i 335i 335is - Coupe

The E46 3-series can really benefit from a slightly firmer suspension. The stock shock and spring package is a bit too soft and mushy with a lot of bodyroll. Even the factory sport suspension was a marginal improvement. If you have been left wanting more from your stock suspension, this is the perfect upgrade. In this E46 shock and spring package we paired H&R Sport springs with a set of Bilstein sport shocks and struts to deliver a package with near-stock levels of comfort but with stiffer springs that improve handling and lower the ride height for better aesthetics.

H&R Sport springs lower the ride height by up to 1.4" in front and .75" in the back and stiffens the spring rate. Both combine to lower the car's center of gravity and reduce the amount of bodyroll in corners. The springs are progressive rate so their initial stiffness is actually very compliant and it becomes stiffer as the spring is compressed. This is great for street cars that see bumps and potholes where suspension compliance is key. Overall, they are about 30% stiffer than the stock original springs.

We use Bilstein Sport shocks as the dampers and they feature Bilstein's patented and innovative valving system. With this system, small bumps and impacts are absorbed as they should be. But the shocks stiffen for cornering and other suspension motions. It's the best of both worlds as the shock self-adjusts based on suspension motion. These fit with the stock strut and shock mounts, making for an easy and clean install.

Ride height varies by stock suspension:

E46 standard suspension: F: -1.4: / R: -0.75"
E46 sport suspension: F: -0.75" / R: -0.25"

Parts list:

• 1 set - H&R Sport Springs (29485 or 29484)
• 1 - Bilstein Left Front Sport strut (35-115106)
• 1 - Bilstein Right Front Sport strut (35-115113)
• 1 pair - Bilstein Rear Sport Shocks (24-027250)

This item fits the following BMWs:
1999-2006 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci sedans and coupes