BMW Suspension Parts

Upgrade your BMW's suspension with ECS Tuning Adjustable Sway Bar End Links, designed to provide up to 60mm (2.36") of adjustability. These end links allow you to eliminate sway bar preload or fine-tune it for specific racing needs and corner balancing. When installed, they improve drivetrain clearance and enhance sway bar responsiveness by reducing deflection, ensuring superior handling. Perfect for lowered vehicles using springs, coilovers, or air-ride suspension systems, these adjustable sway bar end links allow you to remove unwanted preload caused by changes in the center-to-center distance between sway bar mounting points. By adjusting the end links to a neutral position, you eliminate sway bar preload, enhancing suspension performance in various driving conditions.

The main body of the ECS Sway Bar End Links is crafted from strong, lightweight 6061-T6 billet aluminum and anodized red for superior corrosion resistance. Featuring left and right-hand threaded center sections and machined hex wrench fittings, these end links allow for quick and easy on-the-car adjustments. Zinc-plated hardware ensures secure and lasting adjustments, while the heavy-duty ball joint ends come with weather-resistant rubber boots and stainless steel wire retainers, providing superior protection against salt, rain, and ozone for extended durability. Each kit also includes zinc-plated Nyloc nuts and hardened steel washers for secure installation and improved contact surface on the sway bar.

These end links are designed, engineered, and rigorously tested by ECS Tuning to ensure the highest quality. Whether you have a lowered or stock suspension, these adjustable sway bar end links are the perfect upgrade, offering a high-quality, heavy-duty replacement that fits your specific needs.

Features:

Range of Adjustment: 215mm (8.46") to 275mm (10.82") 6061-T6 Billet Aluminum Construction: Red anodized for superior corrosion resistance Zinc-Plated Hardware: Provides durability and superior corrosion protection Right and Left-Hand Threaded Center Sections: Quick and simple on-the-car adjustments Heavy-Duty Ball Joints(M10x1.5): Weather-resistant rubber boots and stainless steel wire retainers for long-lasting durability

Whether you need a camber change or you are looking for more adjustment with your camber plates, you can change your camber by shimming the strut and spindle with the TMS bolt kit. There are some things to take into account with this kit so please read the installation tips below. An alignment is strongly recommended after installing this kit.

Click here for installation instuctions.

This item fits the following BMWs:
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2006-2008 E85 E86 BMW Z4 M Roadster M Coupe

Black anodized billet sway bar end links to replace your flimsy and corroded factory units. Removable hardware for a lifetime serviceable component!

Your factory end link brackets are a one piece design with an integrated stud made of flimsy metal with no coating to protect from the elements. Over the years the end link hardware rusts right to the integrated stud and when you go to remove the end links or brackets they are one strong turn and a snap away from needing to be replaced.

Not only did ECS come up with a stronger solution with a superior resistance to corrosion but went the extra mile to incorporate hardware that can be replaced time and time again so you will never need to replace the brackets themselves. The end link brackets feature chamfers and locator pins to fit perfectly in factory location and make for a straight forward install. The brackets featuring a slotted area for the bolt head to sit so you don't have the headache of having to get a wrench in the tight space behind the bracket while installing them.

Kit Contents:

A pair of rear end link brackets
Hardware needed for installation
Part Design:

Billet aluminum brackets
Zinc coated hardware
Superior corrosion resistance
Large upgrade from factory components

Due to their soft rubber construction, OE strut mounts are known to wear at an accelerated rate. Many high-mileage vehicles fall victim to strut mount failure, which is commonly associated with annoying clunks, groans, or rattles from the front suspension.

With this issue in mind, ECS Tuning developed their heavy-duty front strut mount with upgraded, higher durometer rubber to resolve sloppy handling and increase longevity. Manufactured precisely within OEM tolerances, these mounts are a perfect fit for your MINI.

Features:

Reduces deflection: Increases vehicle handling and cornering dynamics by removing deflection within the strut mount. Increases longevity: Upgraded rubber construction makes for a stiffer mount, less prone to cracking and general degradation. Developed in-house: Designed and tested by ECS Tuning engineers, this mount is sure to outlast an OE replacement. Upgrade to a better strut mount without sacrificing ride comfort! Improve longevity and ride control all at once.

BMW E46 Z4 Rear Polyurethane Differential Bushing Performance is the ultimate upgrade for enhancing the connection between your BMW's chassis and differential. Designed by Turner Motorsport, this performance bushing replaces the soft factory rubber with durable polyurethane, offering superior control and response. By minimizing vibrations and reducing deflection, this bushing ensures a more direct and responsive driving experience, making it a must-have for any performance-oriented BMW E46 or Z4 owner.

• Enhanced Performance: Replaces the soft factory rubber with durable polyurethane for improved driveline response.
• Reduced Vibrations: Minimizes vibrations between the chassis and differential, providing a more connected driving experience.
• Increased Durability: Made from high-quality polyurethane, offering long-lasting performance under demanding conditions.
• Improved Control: Reduces deflection, ensuring a more precise and responsive handling experience.

Fine-tuning your coilover damping shouldn’t mean stripping out your rear seats or interior panels. On many applications, rear shock adjusters are hidden behind carpet, trim, or seatbacks, making quick adjustments a hassle.

The ECS Rear Damping Extension Kit solves that problem with a clean and functional solution. These flexible extensions relocate the adjustment knobs to an easily accessible point above the rear shock towers, letting you dial in your suspension from inside the cabin, no disassembly required.

Installation is straightforward: simply drill a small access hole in your interior trim and route the extension cables through. The adjustment knobs can be removed to allow the line to pass through smaller openings, minimizing cutting. For proper installation, be sure to fully loosen the set screw, insert the cable, then securely tighten it using the provided Allen key.

Kit Includes:

(2) Rear damping adjuster extension cables

Installation hardware and Allen key

A smart upgrade for track cars, daily drivers, or anyone who values easy access to suspension tuning, without compromising interior fit and finish.

The ECS Strut Tower Bar Kit in striking wrinkle black finish goes beyond aesthetics - it offers essential functionality. This kit significantly reduces chassis flex, contributing to a stiffer suspension setup. Moreover, it plays a crucial role in triangulating the front end, resulting in more consistent suspension geometry that enhances your vehicle's performance.

It's essential to ensure that the strut tower plates sit flush against the strut towers. Any misalignment may indicate minor deformations in your strut towers. However, this can be easily addressed using a block of wood and a hammer to reinstate the ideal alignment.

BMW's are notorious for their failure-prone control arm bushings. The pliable rubber bushings, present even in M performance models, allow substantial movement of the front wheels to enhance everyday driving comfort. However, they also permit significant alignment changes, leading to a disconnected and numb road feel that detracts from a confidence-inspiring driving encounter. Over time, the fluid-filled rubber bushings succumb to fatigue and cracking due to continual deflection and ozone degradation, ultimately resulting in the leakage of damping fluid and complete failure.

For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available! Our experience with spherical control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011).

The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise. We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting. The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment. What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.

In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.

Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set, and are available (T599476) if you would prefer that option.

Watch to learn more about Turner Monoball Bushings

Design:

OEM sealed, greased ball joint for exceptional durability and service life, even in the most severe operating conditions
6061-T6 anodized housing for excellent corrosion resistance
Turner designed knurled OD to provide the perfect fit for the wide range of thrust arm bore
CNC machined 304ss bearing inserts, providing a precision fit between the ball joint and the subframe
Performance Advantages:

Immediate, precise steering and breaking feedback
Long-lasting performance with minimal maintenance requirements
Enhanced road feedback minus any unnecessary noise, vibration, harshness

BMW's are notorious for their failure-prone control arm bushings. The pliable rubber bushings, present even in M performance models, allow substantial movement of the front wheels to enhance everyday driving comfort. However, they also permit significant alignment changes, leading to a disconnected and numb road feel that detracts from a confidence-inspiring driving encounter. Over time, the fluid-filled rubber bushings succumb to fatigue and cracking due to continual deflection and ozone degradation, ultimately resulting in the leakage of damping fluid and complete failure.

For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available! Our experience with spherical control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011).

The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise. We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting. The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment. What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.

In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.

Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set, and are available (T599476) if you would prefer that option.

Watch to learn more about Turner Monoball Bushings

Design:

OEM sealed, greased ball joint for exceptional durability and service life, even in the most severe operating conditions
6061-T6 anodized housing for excellent corrosion resistance
Turner designed knurled OD to provide the perfect fit for the wide range of thrust arm bore
CNC machined 304ss bearing inserts, providing a precision fit between the ball joint and the subframe
Performance Advantages:

Immediate, precise steering and breaking feedback
Long-lasting performance with minimal maintenance requirements
Enhanced road feedback minus any unnecessary noise, vibration, harshness

Reduces chassis flex for improved handling and control. Beautiful carbon weave for both a functional and aesthetic enhancing upgrade for your G20 or G42!

The G20 and G42 come in a variety of different models offering a variety of performance options. Whether you have a B48 or B58 they both provide an exhilarating driving experience but are missing a key component found on the M3 and M4, chassis bracing. Taking performance cues from the more performance based "M" chassis we are able to bring an immense value add to your new 2 or 3 series to get the most out of your driving experience with our new 3-point strut brace. This is the only strut brace on the market that takes the handling characteristics from the M3 and puts them to use on your vehicle.

An instant upgrade with no modification needed. Fits directly on your vehicle utilizing factory hardware and supplied stud kit. Designed for both street and track use this 2 piece strut brace is mounted together to create one uniform brace for the best improvement in handling.

Strut tower braces are an excellent and common handling upgrade that work by bracing the shock towers together to reduce chassis flex during cornering. Our engineers designed and tested our one of a kind carbon fiber strut brace in-house to increase chassis rigidity and improve handling during aggressive driving in your 2 or 3 series G chassis BMW. Turner Motorsport has engineered a lightweight* and extremely rigid strut brace kit comprised of carbon fiber with billet aluminum end brackets that will not only enhance your driving experience but also provide an eye-catching addition to your engine bay. This addition gets your chassis once step closer to competing with the BMW M cars that come equipped with factory strut braces!

Our Turner Carbon Fiber Strut Tower Brace for your G20/G42 is incredible! Not just a show piece, This front strut brace is a precision engineered structural component that ensures power is transferred properly and not lost through chassis flex, without any increase in NVH. Adding the strut tower brace allows cornering load to be distributed more competently between both strut towers to reduce chassis flex, preventing changes in wheel alignment geometry that can negatively impact handling.

Carbon fiber is an excellent addition on any vehicle, and offers a very unique look that is found on some of the most exotic vehicles on the road today. This strut brace kit features a clean woven design that is sure to look phenomenal for years to come, and will absolutely compliment your engine bay. This kit includes everything you need for installation.

Design:

CAD designed for perfect integration with the stock mounting locations and features in the engine bay.
Utilizes the factory mounting hardware and supplied mounting studs
Designed with an oval cross-sectional area for increased rigidity
Manufactured using structural carbon fiber with a 2x2 twill weave outer layer for increased rigidity and a great look in the engine bay.
The aluminum chassis mounts are machined from 6061-T6, type II black anodized and bonded to the carbon structure to ensure secure and strong mounting of the strut brace to the chassis.
Performance and Benefits:

Increases structural rigidity of the chassis
Direct fitment
Functional and aesthetic upgrade
Hand-laid Gloss Carbon Fiber
Billet aluminum mounting

BMW's are notorious for their failure-prone control arm bushings. The pliable rubber bushings, present even in M performance models, allow substantial movement of the front wheels to enhance everyday driving comfort. However, they also permit significant alignment changes, leading to a disconnected and numb road feel that detracts from a confidence-inspiring driving encounter. Over time, the fluid-filled rubber bushings succumb to fatigue and cracking due to continual deflection and ozone degradation, ultimately resulting in the leakage of damping fluid and complete failure.

For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available! Our experience with spherical control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011).

The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise. We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting. The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment. What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.

In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.

Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set, and are available (T599476) if you would prefer that option.

Watch to learn more about Turner Monoball Bushings

Design:

OEM sealed, greased ball joint for exceptional durability and service life, even in the most severe operating conditions
6061-T6 anodized housing for excellent corrosion resistance
Turner designed knurled OD to provide the perfect fit for the wide range of thrust arm bore
CNC machined 304ss bearing inserts, providing a precision fit between the ball joint and the subframe
Performance Advantages:

Immediate, precise steering and breaking feedback
Long-lasting performance with minimal maintenance requirements
Enhanced road feedback minus any unnecessary noise, vibration, harshness

Enhance rear-end control and put more power to the ground with a straightforward 3-piece design that installs with ease. The factory rubber may favor ride comfort, but it struggles to keep up when driving gets aggressive. As it wears, the OEM bushing can soften and deform, reducing stability and allowing wheel hop to creep in when you need traction most.

Our 95A durometer polyurethane bushings solve that problem. Engineered to strike the perfect balance between soft factory rubber and harsh solid mounts, they significantly reduce differential movement without introducing excessive vibration. The result is more efficient power transfer, so your torque goes straight to the rear wheels instead of being lost in drivetrain flex.

Features & Benefits:

Minimizes differential movement and instability to help eliminate wheel hop
Two-piece 95A split polyurethane design for easier installation
Precision-fit insert reinforces the bushing and strengthens mounting points
Resistant to road salt, oils, and harsh chemicals
Compatible with dual mount differential plates
Design:

Type II Anodized 6061-T6 CNC billet aluminum inserts for superior corrosion resistance and durability.
95A Polyurethane 2-Piece Isolator.
Product Development:

Our Rear Differential Bushings are designed, engineered, tested, and quality inspected by our Research & Development team. Our development process includes leading-edge product technology: FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

Full set of black anodized billet sway bar end links to replace your flimsy and corroded factory units. Removable hardware for a lifetime serviceable component!

Your factory end link brackets are a one piece design with an integrated stud made of flimsy metal with no coating to protect from the elements. Over the years your end link hardware rusts right to the integrated stud and when you go to remove the end links or brackets they are one strong turn and a snap away from needing to be replaced.

Not only did ECS come up with a stronger solution with a superior resistance to corrosion but went the extra mile to incorporate hardware that can be replaced time and time again so you will never need to replace the brackets themselves. The end link brackets feature chamfers and locator pins to fit perfectly in factory location and make for a straight forward install. The brackets featuring a slotted area for the bolt head to sit so you don't have the headache of having to get a wrench in the tight space behind the bracket while installing them.

Kit Contents:

A set of front and rear end link brackets
Hardware needed for installation
Part Design:

Billet aluminum brackets
Zinc coated hardware
Superior corrosion resistance
Large upgrade from factory components

This is a NEW replacement polyurethane bushing used in our E46 M3 Front Street Camber Plates. This is a custom-manufactured part for Turner Motorsport, made with our own specifications. Replacement is straight-forward but does require the camber plates to be removed from the car. Price is for each bushing.

This item fits the following BMWs:
2001-2006 E46 BMW M3 with Front Turner Street Camber Plate

Enhance your BMW's handling with M7 MAXX-G Adjustable Swaybar Endlinks designed for lowered or raised MINIs. Crafted from forged SAE 4340 alloy steel, these endlinks offer superior strength and symmetry in cornering performance, allowing bind-free suspension travel and improved chassis balance. The adjustability feature ensures proper alignment, maximum grip, and neutralized sway bars for consistent balance in left and right-hand turns.

Benefits:

• Superior strength with forged alloy steel construction
• Symmetric cornering performance enhancement
• Bind-free suspension travel and better alignment
• Adjustable length for precise chassis tuning
• Corrosion-resistant black anodized finish
• Proudly made in the USA

Elevate your driving experience with enhanced performance and aesthetics. ECS lowering springs are crafted to optimize both handling and comfort, striking the perfect balance between performance and drivability. With an average lowering range of 1.6", enjoy the benefits of a lower center of gravity, resulting in superior cornering and enhanced steering feedback. Not only do these lowering springs improve handling, but they also deliver a remarkable aesthetic transformation by reducing the wheel gap, giving your car a more planted and fitted appearance.

The example pictures shown are of both xDrive(Red F22) and Rwd(Blue F22)

Features and Design:

Average FRONT lowering of 1.0" - 1.4"
Average REAR lowering of 1.2" - 1.6"
Lowered center of gravity
Compatible with cars equipped with EDC
Linear style springs
Black powder coating with red ECS logo
MADE IN THE USA
Designed specifically for your chassis these ECS lowering springs feature a linear style spring similar to a coilover. The issue with coilovers is the rough ride due to a drastic drop and much higher spring rates. When you have a higher spring rate like coilovers, it takes much more force to compress the spring, leading to a much more rigid ride. ECS lowering springs provide a happy medium between the factory suspension and coilover suspension. Our springs are stiffer than factory but softer than a coilover spring to achieve the balance of increased performance and aesthetics while retaining a comfortable ride.