BMW Brakes & Brake Parts

This brake package for the 2011+ BMW F10 535i comes with everything you need to perform a major brake overhaul --

Front and rear brake rotors with hardware - stock Genuine BMW, coated OEM-spec (anti-corrosion)
Front and rear brake pads - stock Genuine BMW, factory OEM, low dust semi-metallic
Front and rear pad wear sensors
Brake fluid (DOT4 or DOT5.1 low viscosity)

Our brake package uses the same replacement parts from the same manufacturers as BMW dealers use to service your car. The big difference is that we're able to offer these parts for a substantial savings from the dealer markup price. As an independent company we're able to buy our parts from multiple OEM suppliers whereas BMW dealers must buy their parts from BMW. We're able to shop from different vendors which gets you a better price while still maintaining original quality. You don't have to pay high prices at the dealer to get the same quality and performance!

In some cases, we offer performance alternatives to the OEM items. For an enthusiastic BMW owner, the standard BMW part may be inadequate and we offer an upgraded part, based on our almost 20 years of BMW tuning experience. We seek out high quality suppliers and designs that we would want on our own vehicles. Many times performance parts will fix a design flaw with the original BMW part, improving your performance at the same time.
 

Brake Package FAQ

Brake Pad Buying Guide

Brake Rotor Buying Guide

This item fits the following BMWs:
2011+ F10 BMW 535i 

The RSL29 pad is an endurance racing compound with long life and great wear characteristics. It has stable friction over a broad temperature range which makes them a very easy to use and predictable braking pad in a lot of environments. An evolution of the RSL19 endurance pad designed for more advanced drivers. This compound combines the outstanding wear rate of the RSL19 with a slightly higher coefficient of friction and initial bite. RSL29 also features improved hot fade resistance over the RSL19. In addition to the endurance racing, this pad will also be found in GT and VLN classes and Touring Cars (including our own E46 World Challenge cars). BMW has been using Pagid Yellow pads on their Nurburgring test vehicles and Ring Taxi for years.

This is the set of FRONT pads.

Applications:
2011+ E82 BMW 1M Coupe
2004-2005 E60 525i (automatic transmission only)
2006-2007 E60 525i, 525xi (all transmissions)
2008-2010 E60 528i, 528xi
2004-2007 E60 530i, 530xi
2008-2010 E60 535i, 535xi
2004-2010 E60 545i, 550i
2004-2010 E63 645Ci, 650Ci
2002-2008 E65 745i, 745Li, 750i, 750Li, 760Li
2007-2013 E9X 335i, 335Xi, 335d
2008-2013 E9X M3

The latest in the Yellow line takes all of the RSL29 characteristics and adds a bit more aggressive behavior. Friction levels go up for more initial bite and better fade resistance. Modulation and release stays close to RSL29 levels. Pad and rotor wear is a little more than on the previous Yellows but still within reasonable levels and the RSL1 is still considered an extended endurance pad. Its development stemming from GT classes at Le Mans and Nürburgring.

Since Pagid pads tend to "out-gas" we recommend using these pads with a new gas-slotted or cross-drilled rotor for the best performance. Pagid brake pads are not compatible with previously used rotors, especially if used with a carbon or Kevlar based race pad.

This item fits the following BMWs:
1999-2005 E46 BMW 330i 330ci 330xi M3 
1999-2003 E39 BMW M5 
1995-2001 E38 BMW 740i 740il 
1991-1997 E31 BMW 840i 840ci 850i 850ci 850csi 
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si 
2000-2006 E53 BMW X5 3.0i X5 4.4i X5 4.6is X5 4.8is 
2006-2008 Z4 BMW Z4 M Roadster M Coupe 
2000-2003 E52 BMW Z8 Roadster

The latest in the Yellow line takes all of the RSL29 characteristics and adds a bit more aggressive behavior. Friction levels go up for more initial bite and better fade resistance. Modulation and release stays close to RSL29 levels. Pad and rotor wear is a little more than on the previous Yellows but still within reasonable levels and the RSL1 is still considered an extended endurance pad. Its development stemming from GT classes at Le Mans and Nürburgring.

Since Pagid pads tend to "out-gas" we recommend using these pads with a new gas-slotted or cross-drilled rotor for the best performance. Pagid brake pads are not compatible with previously used rotors, especially if used with a carbon or Kevlar based race pad.

This item fits the following BMWs:
2008-2013 E82/88 BMW 135i, 128 with BMW Performance caliper conversion
2006-2009 E9X BMW Submodels with BMW Performance caliper conversion

RSL19 A favorite of BMW's Motorsport engineers, the Pagid RSL19 compound is an endurance pad based on the RS14 Black but with less friction to improve modulation and low pedal effort. These pads work best in a heat range up to 1,100* F. The combination of friction levels, fade stability, and long life for pads and rotors makes this a favorite for club and HPDE drivers. 

This is the set of Rear pads.

This item fits the following BMWs:
2006-2012 E9X BMW 335i 335d