Find Parts That Fit Your Vehicle

Packaged by Turner BMW Engine Performance Packages

Since 1993 Turner Motorsport has been at the forefront of performance tuning for BMWs. We show this best in our tuned Performance Packages, developed along stages for specific BMW models. Each staged Package is tuned in-house, bringing together expertise from our street tuning division, service shop, and race team. Nearly all of our Packages feature custom-tuned performance software from the best names in the business. The software is the best feature in our kits, maximizing power gains while doing nothing to affect engine reliability or driveability. In most cases, Stages are upgradeable - you can jump from one stage to another by purchasing the new parts and revised software (contact us directly about buying parts outside of the Stage). Or jump right into a higher stage by purchasing the complete kit. We'll work with you to select the appropriate parts and a matching software tune. Nearly all of our Packages have been tested and tuned on our in-house Dynapack Chassis Dyno. Our packages are designed for US-spec models only.
Sort By:

E36 325i/is 93-94 Stage 1 Turner Motorsport Performance Package ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:2843
Part#: TMS2843
In Stock
Sale - Save 5% $ 686.00

This product was last offered at the strikethrough price on
05-03-2026

$ 651.70 USD
Free Shipping
Sale - Save 5%
$ 686.00

This product was last offered at the strikethrough price on
05-03-2026

$ 651.70 USD
Free Shipping
1993-94 E36 325i/is Stage 1 Performance Package
Peak Power Gain: +27hp / +25ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 1 kit featuring a cold-air intake kit and performance software. The aFe cold air intake is made with heat-blocking materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFe uses an oiled air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

Our TMS Performance Chips were also developed by Jim Conforti. The chip is the safest and easiest way to get big power from your engine. Our chips require premium fuel (91 or higher) and allow us to alter the settings on the engine management. Because we can be more aggressive in our tuning, we can get a lot of horsepower for very little money.

Both of these items are packaged and work together. They provide a solid performance boost with a low upfront cost. For an excellent 'bang for the buck' upgrade, the software and intake are a great choice (TMS Underdrive Pulleys would also be on that list).

Related Upgrades: We are often asked what would complement our software and intake packages. Within any Stage, we recommend our Underdrive Power Pulley Kits and a cat-back exhaust. The Power Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

We also recommend upgrading the cat-back muffler for slightly more performance, lighter weight, and a more-aggressive sound. Our favorite E36 M3 mufflers are the Supersprint, Borla, or Corsa exhausts. The Supersprint is the quietest and most like stock while the Corsa is the most aggressive (Borla being in the middle). You can expect a gain of 5whp with any of these exhausts.

1993-94 E36 325i/is Stage 1 Performance Package includes:
aFe Cold Air Intake (oiled cotton filter, heat shield, intake tube)
TMS Performance Chip

Applications:
1993-94 E36 325i, 325is, 325ic
Show More Show Less
E36 325i/is 95 Stage 1 Turner Motorsport Performance Package ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:340153
Part#: TMS2844
In Stock
Sale - Save 15% $ 845.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 719.09 USD
Free Shipping
Sale - Save 15%
$ 845.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 719.09 USD
Free Shipping
1995 E36 325i/is Stage 1 Performance Package
Peak Power Gain: +27hp / +25ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 1 kit featuring a cold-air intake kit and performance software. The aFe intake is made with heat-blocking materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFE uses an oiled cotton air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

Our TMS Performance Chips were also developed by Jim Conforti. The chip is the safest and easiest way to get big power from your engine. Our chips require premium fuel (91 or higher) and allow us to alter the settings on the engine management. Because we can be more aggressive in our tuning, we can get a lot of horsepower for very little money.

Both of these items are packaged and work together. They provide a solid performance boost with a low upfront cost. For an excellent 'bang for the buck' upgrade, the software and intake are a great choice (TMS Underdrive Pulleys would also be on that list).

Related Upgrades: We are often asked what would complement our software and intake packages. Within any Stage, we recommend our Underdrive Power Pulley Kits and a cat-back exhaust. The Power Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

We also recommend upgrading the cat-back muffler for slightly more performance, lighter weight, and a more-aggressive sound. Our favorite E36 M3 mufflers are the Supersprint, Borla, or Corsa exhausts. The Supersprint is the quietest and most like stock while the Corsa is the most aggressive (Borla being in the middle). You can expect a gain of 5whp with any of these exhausts.

1995 E36 325i/is Stage 1 Performance Package includes:
aFe Cold Air Intake (oiled cotton filter, heat shield, intake tube)
TMS Performance Chip (we need your car's production date, choose from below)

Applications:
1995 E36 325i, 325is, 325ic
Show More Show Less
Turner E82/E9X N55 2009-11 Performance Package - Stage 2
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:582815
Part#: N55S2PPKT1
Ships in 7 Business Days
$ 1,767.00 USD
$ 1,767.00 USD
If you want to get the most out of your BMW's N55 3.0L, it is important to have the proper supporting modifications to achieve your goals. We have built out our power packages that include all the needed items to build upon each other for the best possible power gains. This kit includes all of the similar components as the Stage 1 kit: a Pheonix Racing aluminum performance charge pipe for increased flow and a Burger Motorsports JB4 tuner module to manage your power gains every step of the way. Stage 2 adds the Wagner EVO 2 intercooler that allows for a 90% increase in airflow volume. To handle this increase in airflow, Stage 2 also includes a new BMS Intake to increase airflow without restriction. Not for sale or use in the state of California.
Show More Show Less

Turner E82/E9X N55 2009-11 Performance Package - Stage 3
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:582817
Part#: N55S3PPKT1
Ships in 7 Business Days
$ 2,535.00

This product was last offered at the strikethrough price on
04-20-2026

$ 2,257.00 USD
$ 2,257.00 USD
If you want to get the most out of your BMW's N55 3.0L, it is important to have the proper supporting modifications to achieve your goals. We have built out our power packages that include all the needed items to build upon each other for the best possible power gains. This kit includes all of the similar components as the Stage 2 kit: a Pheonix Racing aluminum performance charge pipe for increased flow, a Burger Motorsports JB4 tuner module to manage your power gains every step of the way, a Wagner EVO 2 intercooler, and a BMS high flow intake. Stage 3 adds a Wagner catted high flow downpipe to increase exhaust flow for maximum power. Not for sale or use in the state of California.
Show More Show Less

Turner Motorsport E46 M3 Power Pack - Stage 1
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:586777
Part#: E46M3PP1
Ships on Aug 11, 2026
Sale - Save 7% $ 951.99

This product was last offered at the strikethrough price on
01-03-2026

Starting at $ 883.10 USD
Free Shipping
Sale - Save 7%
$ 951.99

This product was last offered at the strikethrough price on
01-03-2026

Starting at $ 883.10 USD
Free Shipping
The E46 M3 was one of the most versatile cars ever produced. Want a car that handles well, is comfortable, and is perfect for driving down twisting roads on the weekend? E46 M3. Or how about something you can take to weekend track days and enjoy without any major modifications? E46 M3. Maybe you want to go full race car? E46 M3! The reliability, power, and handling characteristics made this car a legend that is still highly sought after, not to mention how amazing this car looks. Whatever your needs may be, we have a number of Turner Power Packs designed to start building the M3 of your dreams. We offer everything from Stage 1 to Stage 4+, and even a Track Inspired Power Pack designed for the ultimate in performance needs! This stage 1 kit offers the following upgrades: aFe Performance Intake Kit Pro5r - Increase airflow volume to increase performance at all RPMs Shark Injector Performance Software - Tune your car for optimal performance, perfectly paired with any and all modifications
Show More Show Less
E46 330i/ci/xi 01-03 Stage 1 Turner Motorsport Performance Package ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:2850
Part#: TMS2850
Ships on Aug 11, 2026
Sale - Save 10% $ 916.95

This product was last offered at the strikethrough price on
05-03-2026

$ 825.26 USD
Free Shipping
Sale - Save 10%
$ 916.95

This product was last offered at the strikethrough price on
05-03-2026

$ 825.26 USD
Free Shipping
2001-2/2003 E46 330i/Ci, 2001-05 330Xi Stage 1 Performance Package
Peak Power Gain: +8hp / +10ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 1 kit featuring a cold-air intake kit and matching performance software. The aFe intake is made with heat-blocking materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFe uses an oiled cotton air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

The software is tuned by BMW tuning whiz Jim Conforti and supplied with the Shark Injector. The Shark Injector is a do-it-yourself reflash tool that plugs into the OBD diagnostic plug in your dash. With the push of a button, it will copy your stock software and reflash your computer with the performance tune. You can set it back to stock at any time by following the same procedure.

Both of these items are packaged and work together. They provide a solid performance boost with a low upfront cost. For an excellent 'bang for the buck' upgrade, the software and intake are a great choice (TMS Underdrive Pulleys would also be on that list).

Related Upgrades: We are often asked what would complement our software and intake packages. Within any Stage, we recommend our Underdrive Power Pulley Kits. The Power Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

We also recommend upgrading the cat-back muffler for slightly more performance, lighter weight, and a more-aggressive sound. Our favorite E46 mufflers are the Supersprint, Borla, or Corsa exhausts. The Supersprint is the quietest and most like stock while the Corsa is the most aggressive (Borla being in the middle). You can expect a gain of 5whp with any of these exhausts.

2001-2/2003 E46 330i/Ci, 2001-05 330Xi Stage 1 Engine Upgrade Kit includes:
aFe Cold Air Intake (oiled cotton filter, heat shield, intake tube)
Shark Injector performance software

Applications:
2001-2/2003 E46 330i sedan, 330Ci coupe and convertible (check your driver's door pillar for production date data)
2001-2005 330Xi sedan
Show More Show Less

E85 Z4 3.0 03-05 Stage 1 Turner Motorsport Performance Package ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:2911
Part#: TMS2911
Ships on Aug 11, 2026
Sale - Save 4% $ 752.00

This product was last offered at the strikethrough price on
01-03-2026

$ 725.56 USD
Free Shipping
Sale - Save 4%
$ 752.00

This product was last offered at the strikethrough price on
01-03-2026

$ 725.56 USD
Free Shipping
2003-2005 E85 Z4 3.0-liter Stage 1 Performance Package
Peak Power Gain: +17hp / +8ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 1 kit featuring a cold-air intake kit and performance software. The aFE intake is made from high-quality materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFe's Stage 2 Intake uses an oiled cotton air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, ABS plastic intake tube, sealing materials, hardware, and install instructions.

The software is tuned by BMW tuning whiz Jim Conforti and supplied with the Shark Injector. The Shark Injector is a do-it-yourself reflash tool that plugs into the OBD diagnostic plug in your dash. With the push of a button, it will copy your stock software and reflash your computer with the performance tune. You can set it back to stock at any time by following the same procedure.

Both of these items work together to bring up huge torque increases and much improved driveability. They provide a solid performance boost with a low upfront cost. For an excellent 'bang for the buck' upgrade, the software and intake are a great choice.

2003-2005 E85 Z4 3.0-liter Stage 1 Engine Upgrade includes:
aFe Cold Air Intake
Shark Injector performance software

Applications:
2003-2005 E85 Z4 3.0-liter (M54 engine)
Show More Show Less
Turner E90/E92/E93 M3 S65 Performance Package - Stage 1
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:394628
Part#: E9XMS65PPSTG1
Ships on Nov 4, 2026
Sale - Save 37% $ 1,714.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 1,084.14 USD
Free Shipping
Sale - Save 37%
$ 1,714.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 1,084.14 USD
Free Shipping
Turner's Stage 1 performance package for E90, E92, E93 M3 delivers a one-two punch with the easiest no-downside upgrades for the S65: Turner Stage 1 Performance Software and Power Pulley.

E60 530i/xi 06-07 Stage 1 Turner Motorsport Performance Package ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:391355
Part#: E60530-N52-ST1
In Stock
Sale - Save 25% $ 1,351.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 1,013.99 USD
Free Shipping
Sale - Save 25%
$ 1,351.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 1,013.99 USD
Free Shipping

2006-2007 E60 530i Stage 1 Performance Package
Peak Power Gain: +29hp / +29ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 1 kit featuring a cold-air intake kit and matching performance software. The aFe intake is a cone filter with a heat-blocking shield around it. The larger surface area of the filter, combined with the heat shield, allow more cool air to enter the engine - creating more power and torque, a richer engine sound, and better throttle response. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

Our flash software is tuned especially for a cold-air intake, maximizing the potential and providing smoother power delivery. We take the stock software and make adjustments for 91 octane (stock software is set around 87). We can get more power and torque, and increase fuel efficiency without affecting driveability or the life of the engine. The throttle response is also improved (quicker) eliminating unwanted and dangerous flat spots in the pedal response.

Our software fully maximizes the 'low-output' N52B30O0 engine in the 530i. Our software has been carefully developed on the dyno and the road to provide optimal power and torque gains at all RPM. We change the fuel, Valvetronic, and VANOS maps as well as revise the factory torque limiters. We have paid particular attention to increasing low and mid-range torque. The stock BMW software is hampered by settings for 87 octane fuel. By re-mapping the engine programming for 91 octane, we can make more power, torque, and improve fuel mileage - all without harm to the engine or affecting driveability. The throttle response is also improved (quicker) eliminating unwanted and dangerous flat spots in the pedal response.

There are two ways to install our software: mailing the ECU to us for a reflash or do-it-yourself install with our Turner Flash tool:

Mail-In Reflash - lower upfront cost but additional shipping charges. Minimum downtime of at least three days. We have a 24 hour turnaround on shipping the ECU back to you but factor in transit time. Expert installation of your software at our facility.
Turner Flash DIY tool - higher upfront cost but files are emailed back and forth. No downtime - you can still drive the car while we process your tune. Files are emailed back and forth - your stock file comes to us, a tuned file is returned to you. Easy install via Windows laptop. 

E60 530i Stage 1 Engine Upgrade includes:
aFe Cold Air Intake (filter, heat shield, intake tube)
Turner Motorsport Performance Software Flash

This item fits the following BMWs:
2006-2007 E60 BMW 530i 530xi

Show More Show Less

E36 M3 96-99 Stage 1 Turner Motorsport Performance Package
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:4158
Part#: TMS-I3MS41
In Stock
Sale - Save 3% $ 736.00

This product was last offered at the strikethrough price on
05-03-2026

$ 713.92 USD
Free Shipping
Sale - Save 3%
$ 736.00

This product was last offered at the strikethrough price on
05-03-2026

$ 713.92 USD
Free Shipping
1996-99 E36 M3 Stage 1 Performance Package
Peak Power Gain: +10whp / +10wft-lbs
Rev limit: 7000
Octane: 91 or higher

Stage 1 Performance Package includes:
aFe Cold Air Intake (high-flow filter, heat-blocking coated filter shield, molded intake tube)
Conforti Shark Injector performance software

Our base Stage 1 kit featuring a cold-air intake kit and matching performance software. The aFe air filter benefits from a heat blocking shield - drawing cool air from the factory intake ducts to feed the engine. aFe uses an oiled cotton air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

The software is also Conforti-tuned and supplied with the Shark Injector software loader. The Shark Injector is a do-it-yourself reflash tool that plugs into the diagnostic plug in the engine bay. With the push of a button, it will copy your stock software and reflash your computer with the performance tune. You can set it back to stock at any time by following the same procedure.

Both of these items are packaged and tuned to work together. They provide a solid performance boost with a low upfront cost. For an excellent 'bang for the buck' upgrade, the software and intake are a great choice. This Package can be upgraded to Stage 2 by adding the larger HFM, "24lb" fuel injectors, a larger air intake kit, and Stage 2 software.

Related Upgrades -
Underdrive Power Pulley Kit - Underdriving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10hp at the wheels.
Exhaust - Borla or Corsa cat-back muffler for more performance, lighter weight, and a more-aggressive sound. Expect a gain of 5whp with either of these exhausts.

This item fits the following BMWs:
1996-1999 E36 M3 (manual transmission)
1996-1999 E36 M3 (automatic transmission)
Show More Show Less
E36 323iC/323is Stage 1 Turner Motorsport Performance Package ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:2531
Part#: TMS2531
In Stock
Sale - Save 3% $ 736.00

This product was last offered at the strikethrough price on
05-03-2026

$ 713.92 USD
Free Shipping
Sale - Save 3%
$ 736.00

This product was last offered at the strikethrough price on
05-03-2026

$ 713.92 USD
Free Shipping
1998-99 E36 323ic/is Stage 1 Performance Package
Peak Power Gain: +20hp / +20ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 1 kit featuring a cold-air intake kit and performance software. The aFe Cold Air Intake is made with heat-blocking materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFe uses an oiled cottonair filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

The software is also Conforti-tuned and supplied with the Shark Injector software loader. The Shark Injector is a do-it-yourself reflash tool that plugs into the diagnostic plug in the engine bay. With the push of a button, it will copy your stock software and reflash your computer with the performance tune. You can set it back to stock at any time by following the same procedure.

Both of these items are packaged and work together. They provide a solid performance boost with a low upfront cost. For an excellent 'bang for the buck' upgrade, the software and intake are a great choice (TMS Underdrive Pulleys would also be on that list).

Related Upgrades: We are often asked what would complement our software and intake packages. Within any Stage, we recommend our Underdrive Power Pulley Kits. The Power Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

1998-99 E36 323ic/is Stage 1 Performance Package includes:
aFe Cold Air Intake (oiled cotton filter, heat shield, intake tube)
Shark Injector performance software

Applications:
1998-1999 E36 323i cabrio, 323is coupe
Show More Show Less
E60 525i/xi 06-07 Stage 1 Turner Motorsport Performance Package ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:391354
Part#: E60525-N52-ST1
In Stock
Sale - Save 25% $ 1,351.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 1,013.99 USD
Free Shipping
Sale - Save 25%
$ 1,351.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 1,013.99 USD
Free Shipping

2006-2007 E60 525i Stage 1 Performance Package
Peak Power Gain: +29hp / +29ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 1 kit featuring a cold-air intake kit and matching performance software. The aFe intake is a cone filter with a heat-blocking shield around it. The larger surface area of the filter, combined with the heat shield, allow more cool air to enter the engine - creating more power and torque, a richer engine sound, and better throttle response. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

Our flash software is tuned especially for a cold-air intake, maximizing the potential and providing smoother power delivery. We take the stock software and make adjustments for 91 octane (stock software is set around 87). We can get more power and torque, and increase fuel efficiency without affecting driveability or the life of the engine. The throttle response is also improved (quicker) eliminating unwanted and dangerous flat spots in the pedal response.

Our software fully maximizes the 'low-output' N52B30 engine in the 525i. Our software has been carefully developed on the dyno and the road to provide optimal power and torque gains at all RPM. We change the fuel, Valvetronic, and VANOS maps as well as revise the factory torque limiters. We have paid particular attention to increasing low and mid-range torque. The stock BMW software is hampered by settings for 87 octane fuel. By re-mapping the engine programming for 91 octane, we can make more power, torque, and improve fuel mileage - all without harm to the engine or affecting driveability. The throttle response is also improved (quicker) eliminating unwanted and dangerous flat spots in the pedal response.

There are two ways to install our software: mailing the ECU to us for a reflash or do-it-yourself install with our Turner Flash tool:

Mail-In Reflash - lower upfront cost but additional shipping charges. Minimum downtime of at least three days. We have a 24 hour turnaround on shipping the ECU back to you but factor in transit time. Expert installation of your software at our facility.
Turner Flash DIY tool - higher upfront cost but files are emailed back and forth. No downtime - you can still drive the car while we process your tune. Files are emailed back and forth - your stock file comes to us, a tuned file is returned to you. Easy install via Windows laptop. 

E60 525i Stage 1 Engine Upgrade includes:
aFe Cold Air Intake (filter, heat shield, intake tube)
Turner Motorsport Performance Software Flash

This item fits the following BMWs:
2006-2007 E60 BMW 525i 525xi

Show More Show Less


E36 325i/is 95 Stage 3 Turner Motorsport Performance Package ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:338677
Part#: TMS2906
In Stock
Starting at $ 387.00 USD
Free Shipping
Starting at $ 387.00 USD
Free Shipping
1995 E36 325i/is Stage 3 Performance Package
Peak Power Gain: +40hp / +32ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 3 kit features a cold-air intake kit, cat-back exhaust, performance software, and is tuned for stock M3 cams (not included in Package, can be added below). This whole package has been precisely tuned to work together and make the most power with as little downside.

The aFe intake is made with heat-blocking materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFe uses an oiled cotton air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

We can supply this Package with either a Borla or Corsa exhaust system. Both are stainless steel cat-back sections with dual tips. The Borla is a little more mellower sound than the Corsa. The Corsa makes a deep, aggressive burble that is a bit on the loud side but not over-the-top. Both are very light weight with the Borla weighing only 28lbs.

The difference between Stage 2 and Stage 3 is that the software we supply is also tuned for the M3 camshaft upgrade. Adding the stock cams from the S50 and S52 M3 engine is a big wake-up call on the 325i motor. You can expect big power gains in the top end. The M3 cams are a perfect blend of power and driveability - you lose almost nothing in low-end torque.

Our TMS Performance Chips include specific tuning for each part of the Package. The chip is the safest and easiest way to get big power from your engine. Our chips require premium fuel (91 or higher) and allow us to alter the settings on the engine management. Because we can be more aggressive in our tuning, we can get a lot of horsepower for very little money.

Related Upgrades: Within any Stage, we recommend our Underdrive Power Pulley Kit. The Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

1995 E36 325i/is Stage 3 Performance Package includes:
aFe Cold Air Intake (oiled cotton filter, heat shield, intake tube)
Borla or Corsa Exhaust
TMS Stage 2 Performance Chip (tuned for intake, exhaust, M3 cams)

E36 M3 Camshafts
We sell this Package without cams. Used M3 cams can be found from various sources (eBay, forums, etc). We can supply you with new, factory M3 cams or the Schrick equivalent (same specs as factory M3). Select one of these options below.

Applications:
1995 E36 325i, 325is, 325ic
Show More Show Less
E36 328i/is 96-99 Stage 1 Turner Motorsport Performance Package ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:2845
Part#: TMS2845
In Stock
Sale - Save 3% $ 736.00

This product was last offered at the strikethrough price on
05-03-2026

$ 713.92 USD
Free Shipping
Sale - Save 3%
$ 736.00

This product was last offered at the strikethrough price on
05-03-2026

$ 713.92 USD
Free Shipping
1996-99 E36 328i/ic/is Stage 1 Performance Package
Peak Power Gain: +17hp / +12ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 1 kit featuring a cold-air intake kit and performance software. The aFe coil air intake is made with heat-blocking materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFe uses an oiled cotton air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

The software is also Conforti-tuned and supplied with the Shark Injector software loader. The Shark Injector is a do-it-yourself reflash tool that plugs into the diagnostic plug in the engine bay. With the push of a button, it will copy your stock software and reflash your computer with the performance tune. You can set it back to stock at any time by following the same procedure.

Both of these items are packaged and work together. They provide a solid performance boost with a low upfront cost. For an excellent 'bang for the buck' upgrade, the software and intake are a great choice (TMS Underdrive Pulleys would also be on that list).

Related Upgrades: We are often asked what would complement our software and intake packages. Within any Stage, we recommend our Underdrive Power Pulley Kits. The Power Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

We also recommend upgrading the cat-back muffler for slightly more performance, lighter weight, and a more-aggressive sound. Our favorite E36 M3 mufflers are the Supersprint, Borla, or Corsa exhausts. The Supersprint is the quietest and most like stock while the Corsa is the most aggressive (Borla being in the middle). You can expect a gain of 5whp with any of these exhausts.

1996-99 E36 328i/ic/is Stage 1 Performance Package includes:
aFe Cold Air Intake (oiled cotton filter, heat shield, intake tube)
Shark Injector performance software

Applications:
1996-1999 E36 328i sedan, 328i cabrio, 328is coupe
Show More Show Less
E36 325i/is 92 Stage 1 Turner Motorsport Performance Package ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:340151
Part#: TMS2842
In Stock
Sale - Save 5% $ 636.00

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 604.20 USD
Free Shipping
Sale - Save 5%
$ 636.00

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 604.20 USD
Free Shipping
1992 E36 325i/is Stage 1 Performance Package
Peak Power Gain: +16hp / +24ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our base Stage 1 kit featuring a cold-air intake kit and matching performance software. The aFe air filter benefits from a heat blocking shield - drawing cool air from the factory intake ducts to feed the engine. aFe uses an oiled cotton air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

Our TMS Performance Chips were also developed by Jim Conforti. The chip is the safest and easiest way to get big power from your engine. Our chips require premium fuel (91 or higher) and allow us to alter the settings on the engine management. Because we can be more aggressive in our tuning, we can get a lot of horsepower for very little money.

Both of these items are packaged and work together. They provide a solid performance boost with a low upfront cost. For an excellent 'bang for the buck' upgrade, the software and intake are a great choice (TMS Underdrive Pulleys would also be on that list).

Related Upgrades -
Underdrive Power Pulley Kit - Underdriving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10hp at the wheels.
Exhaust - Borla or Corsa cat-back muffler for more performance, lighter weight, and a more-aggressive sound. Expect a gain of 5whp with either of these exhausts.

1992 E36 325i/is Stage 1 Performance Package includes:
aFe Cold Air Intake (oiled cotton filter, heat shield, intake tube)
TMS Performance Chip (need to specify your car's DME number in the order)

Applications:
1992 E36 325i, 325is
Show More Show Less

E9X 335i/xi N54 Stage 1 Turner Power Package (with aFe DCI Intake) ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:11790
Part#: TMS11790
Ships in 2 Business Days
$ 1,194.00 USD
Free Shipping
$ 1,194.00 USD
Free Shipping
2007-2010 E90/E92/E93 335i N54 Stage 1 Performance Package with aFe Dual-Cone Intake
Peak Power Gain: up to 103hp / 108ft-lbs
+ aFe Pro5R Dual Cone Intake
+ Cobb AccessPort programmer


Our Stage 1 kit features a cold-air intake kit and performance software for a staggering increase in power and torque on the N54 motor. We offer this package with the aFe Dual Cone Intake (DCI) to open up the breathing. The larger surface area of the filters allows more air to enter the engine - creating more power and torque, a richer engine sound, and better throttle response. The kit is supplied complete with aFe Pro5R filters, mounting shield, intake tubes, sealing materials, hardware, and install instructions. The torque increase from low-mid RPM is sensational.

We have paired the aFe DCI with the Cobb AccessPort performance software. The Cobb software tool puts multiple tuning stages in the palm of your hand. Our Stage 1 Performance Package is aligned with the Cobb Stage 1 tuning maps (91 or 93+ octane fuel). Simply plug it in, select the Stage 1 map with your octane preference, and install. Select different maps for other upgrades, throttle settings, octane ratings, valet mode, or revert back to stock! If you're moving up in Stages simply download a new file from the Cobb website and update your AccessPort programmer! The AccessPort triples as a diagnostic tester/reader and a data logger. It's the most feature-packed programmer on the market today.

We have taken the guesswork out of choosing the best upgrades for the N54 engine. If you follow the upgrade path we have laid out you will have very satisfying and reliable results. This Stage 1 package is a great 'bang for the buck' upgrade - this power kit makes more power and torque at every RPM and makes a fantastic snarling sound every time you dip into the throttle. Note that peak power gains are quoted above but this package has even bigger performance gains in the lower RPM!

This item fits the following BMWs:
2007-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2010 E92 BMW 335i 335is* 335xi 335i xDrive - Coupe
2007-2010 E93 BMW 335i - Convertible
* 335is horsepower gains are lower due to the factory power boost in the "is" package
Show More Show Less

E82/E88 135i N54 Stage 1 Turner Power Package (with aFe DCI Intake) ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:11783
Part#: TMS11783
Ships in 2 Business Days
Sale - Save 3% $ 1,534.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,488.90 USD
Free Shipping
Sale - Save 3%
$ 1,534.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,488.90 USD
Free Shipping
2008-2010 E82 135i N54 Stage 1 Performance Package with aFe Dual-Cone Intake
Peak Power Gain: up to 103hp / 108ft-lbs
+ aFe Pro5R Dual Cone Intake
+ Cobb AccessPort programmer


Our Stage 1 kit features a cold-air intake kit and performance software for a staggering increase in power and torque on the N54 motor. We offer this package with the aFe Dual Cone Intake (DCI) to open up the breathing. The larger surface area of the filters allows more air to enter the engine - creating more power and torque, a richer engine sound, and better throttle response. The kit is supplied complete with aFe Pro5R filters, mounting shield, intake tubes, sealing materials, hardware, and install instructions. The torque increase from low-mid RPM is sensational.

We have paired the aFe DCI with the Cobb AccessPort performance software. The Cobb software tool puts multiple tuning stages in the palm of your hand. Our Stage 1 Performance Package is aligned with the Cobb Stage 1 tuning maps (91 or 93+ octane fuel). Simply plug it in, select the Stage 1 map with your octane preference, and install. Select different maps for other upgrades, throttle settings, octane ratings, valet mode, or revert back to stock! If you're moving up in Stages simply download a new file from the Cobb website and update your AccessPort programmer! The AccessPort triples as a diagnostic tester/reader and a data logger. It's the most feature-packed programmer on the market today.

We have taken the guesswork out of choosing the best upgrades for the N54 engine. If you follow the upgrade path we have laid out you will have very satisfying and reliable results. This Stage 1 package is a great 'bang for the buck' upgrade - this power kit makes more power and torque at every RPM and makes a fantastic snarling sound every time you dip into the throttle. Note that peak power gains are quoted above but this package has even bigger performance gains in the lower RPM!

This item fits the following BMWs:
2008-2010 E82 BMW 135i (N54 engine)
Show More Show Less
E9X 335i/xi N54 Stage 1 Turner Power Package (with aFe Elite Intake) ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:11791
Part#: TMS11791
Ships in 3 Business Days
$ 1,510.00 USD
Free Shipping on orders $49 and up
2007-2010 E90/E92/E93 335i N54 Stage 1 Performance Package with aFe Dual-Cone Intake
Peak Power Gain: up to 107hp / 110ft-lbs
+ aFe Pro5R SI Sealed Intake
+ Cobb AccessPort programmer


Our Stage 1 kit features a cold-air intake kit and performance software for a staggering increase in power and torque. This premium package is offered with the aFe Elite Intake and Cobb AccessPort tuner. The Elite intake kit completely maximizes airflow - drawing in air from grille-mounted ducts for a 'ram-air' effect. Each duct flows through a channel into the airbox where it meets a aFe Pro5R filter designed especially for this application. This is our favorite system for the 335 as it is very well engineered, fits well, and almost looks factory. There are no open filter elements to get loaded with dirt. The kit is supplied complete with an aFe Pro5R filter, airbox, intake tube, sealing materials, hardware, and install instructions. The torque increase from low-mid RPM is sensational.

We have paired the aFe Elite with the Cobb AccessPort performance software. The Cobb software tool puts multiple tuning stages in the palm of your hand. Our Stage 1 Performance Package is aligned with the Cobb Stage 1 tuning map. Simply plug it in, select the Stage 1 map with your octane preference, and install. Select different maps for other upgrades, throttle settings, octane ratings, valet mode, or revert back to stock! If you're moving up in Stages simply download a new file from the Cobb website and update your AccessPort programmer! The AccessPort triples as a diagnostic tester/reader and a data logger. It's the most feature-packed programmer on the market today.

We have taken the guesswork out of choosing the best upgrades for the N54 engine. If you follow the upgrade path we have laid out you will have very satisfying and reliable results. This Stage 1 package is a great 'bang for the buck' upgrade - this power kit makes more power and torque at every RPM and makes a great sound every time you dip into the throttle.

335i Stage 1 Elite Engine Upgrade includes:
aFe Elite Intake (filter, airbox, intake tube)
Cobb AccessPort Performance Programmer

This item fits the following BMWs:
2007-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2010 E93 BMW 335i - Convertible
Show More Show Less

E90 330i/xi 06 Stage 1 Turner Motorsport Performance Package ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:391352
Part#: E90330-ST1
Ships in 3 Business Days
Sale - Save 25% $ 1,351.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 1,013.99 USD
Free Shipping
Sale - Save 25%
$ 1,351.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 1,013.99 USD
Free Shipping

2006 E90 330i Stage 1 Performance Package
Peak Power Gain: +29hp / +29ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 1 kit featuring a cold-air intake kit and matching performance software. The aFe intake is a cone filter with a heat-blocking shield around it. The larger surface area of the filter, combined with the heat shield, allow more cool air to enter the engine - creating more power and torque, a richer engine sound, and better throttle response. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

Our flash software is tuned especially for a cold-air intake, maximizing the potential and providing smoother power delivery. We take the stock software and make adjustments for 91 octane (stock software is set around 87). We can get more power and torque, and increase fuel efficiency without affecting driveability or the life of the engine. The throttle response is also improved (quicker) eliminating unwanted and dangerous flat spots in the pedal response.

Our software fully maximizes the 'high-output' N52B30O0 engine in the 330i. Our software has been carefully developed on the dyno and the road to provide optimal power and torque gains at all RPM. We change the fuel, Valvetronic, and VANOS maps as well as revise the factory torque limiters. We have paid particular attention to increasing low and mid-range torque. The stock BMW software is hampered by settings for 87 octane fuel. By re-mapping the engine programming for 91 octane, we can make more power, torque, and improve fuel mileage - all without harm to the engine or affecting driveability. The throttle response is also improved (quicker) eliminating unwanted and dangerous flat spots in the pedal response.

There are two ways to install our software: mailing the ECU to us for a reflash or do-it-yourself install with our Turner Flash tool:

Mail-In Reflash - lower upfront cost but additional shipping charges. Minimum downtime of at least three days. We have a 24 hour turnaround on shipping the ECU back to you but factor in transit time. Expert installation of your software at our facility.
Turner Flash DIY tool - higher upfront cost but files are emailed back and forth. No downtime - you can still drive the car while we process your tune. Files are emailed back and forth - your stock file comes to us, a tuned file is returned to you. Easy install via Windows laptop. 

E90 330i Stage 1 Engine Upgrade includes:
aFe Cold Air Intake (filter, heat shield, intake tube)
Turner Motorsport Performance Software Flash

This item fits the following BMWs:
2006 E90 BMW 330i

Show More Show Less
E82 135i N54 Stage 1 Turner Power Package (with Sealed Intake) ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:11784
Part#: TMS11784
Ships in 3 Business Days
$ 1,244.00 USD
Free Shipping on orders $49 and up
2008-2010 E82 135i N54 Stage 1 Performance Package with aFe Dual-Cone Intake
Peak Power Gain: up to 107hp / 110ft-lbs
+ aFe Pro5R SI Sealed Intake
+ Cobb AccessPort programmer


Our Stage 1 kit features a sealed cold-air intake kit and performance software for a staggering increase in power and torque. This premium package is offered with the aFe Sealed Intake (SI) kit and Cobb AccessPort tuner. The larger surface area of the filters allows more air to enter the engine - creating more power and torque, a richer engine sound, and better throttle response. While the new intake plenum box completely seals out the filter from underhood temperatures. The kit is supplied complete with an aFe Pro5R filter, airbox, intake tube, sealing materials, hardware, and install instructions. The torque increase from low-mid RPM is sensational.

We have paired the aFe SI with the Cobb AccessPort performance software. The Cobb software tool puts multiple tuning stages in the palm of your hand. Our Stage 1 Performance Package is aligned with the Cobb Stage 1 tuning map. Simply plug it in, select the Stage 1 map with your octane preference, and install. Select different maps for other upgrades, throttle settings, octane ratings, valet mode, or revert back to stock! If you're moving up in Stages simply download a new file from the Cobb website and update your AccessPort programmer! The AccessPort triples as a diagnostic tester/reader and a data logger. It's the most feature-packed programmer on the market today.

We have taken the guesswork out of choosing the best upgrades for the N54 engine. If you follow the upgrade path we have laid out you will have very satisfying and reliable results. This Stage 1 package is a great 'bang for the buck' upgrade - this power kit makes more power and torque at every RPM and makes a great sound every time you dip into the throttle.

135i Stage 1 Engine Upgrade includes:
aFe Sealed Intake (filter, airbox, intake tube)
Cobb AccessPort Performance Programmer

This item fits the following BMWs:
2008-2010 E82 BMW 135i (N54 engine)
Show More Show Less

Packaged By Turner - E46 325i/Ci Power Pack
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
For vehicles with production date up to 02/2003 with Bosch alternator
Packaged by Turner - Corporate Logo
T#:41289783
Part#: 787406TKT
Ships on Sep 8, 2026
Sale - Save 5% $ 1,955.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,852.31 USD
Sale - Save 5%
$ 1,955.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,852.31 USD
Improve your cars efficiency and performance with this effective and simple upgrade kit!

E36 325i/is 93-94 Stage 2 Turner Motorsport Performance Package ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:340152
Part#: TMS2891
Ships in 10 Business Days
Sale - Save 3% $ 2,106.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 2,043.78 USD
Sale - Save 3%
$ 2,106.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 2,043.78 USD
1993-94 E36 325i/is Stage 2 Performance Package
Peak Power Gain: +30hp / +28ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 2 kit featuring a cold-air intake kit, cat-back exhaust, and performance software. All three of these pieces have been precisely tuned to work together and make the most power with as little downside.

The aFe intake is made with heat-blocking materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFe uses an oiled cotton air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

We can supply this Package with either a Borla or Corsa exhaust system. Both are stainless steel cat-back sections with dual tips. The Borla is a little more mellower sound than the Corsa. The Corsa makes a deep, aggressive burble that is a bit on the loud side but not over-the-top. Both are very light weight with the Borla weighing only 28lbs.

Our TMS Performance Chips include specific tuning for each part of the Package. The chip is the safest and easiest way to get big power from your engine. Our chips require premium fuel (91 or higher) and allow us to alter the settings on the engine management. Because we can be more aggressive in our tuning, we can get a lot of horsepower for very little money.

Related Upgrades: Within any Stage, we recommend our Underdrive Power Pulley Kit. The Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

1993-94 E36 325i/is Stage 2 Performance Package includes:
aFe Cold Air Intake (oiled cotton filter, heat shield, intake tube)
Borla or Corsa Exhaust
TMS Stage 2 Performance Chip

Applications:
1993-94 E36 325i, 325is, 325ic
Show More Show Less
E36 325i/is 95 Stage 2 Turner Motorsport Performance Package ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:340154
Part#: TMS2904
Ships in 10 Business Days
Sale - Save 3% $ 2,096.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 2,034.08 USD
Sale - Save 3%
$ 2,096.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 2,034.08 USD
1995 E36 325i/is Stage 2 Performance Package
Peak Power Gain: +30hp / +28ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 2 kit featuring a cold-air intake kit, cat-back exhaust, and performance software. All three of these items have been precisely tuned to work together and make the most power with as little downside.

The aFe intake is made with heat-blocking materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFe uses an oiled cotton air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

We can supply this Package with either a Borla or Corsa exhaust system. Both are stainless steel cat-back sections with dual tips. The Borla is a little more mellower sound than the Corsa. The Corsa makes a deep, aggressive burble that is a bit on the loud side but not over-the-top. Both are very light weight with the Borla weighing only 28lbs.

Our TMS Performance Chips include specific tuning for each part of the Package. The chip is the safest and easiest way to get big power from your engine. Our chips require premium fuel (91 or higher) and allow us to alter the settings on the engine management. Because we can be more aggressive in our tuning, we can get a lot of horsepower for very little money.

Related Upgrades: Within any Stage, we recommend our Underdrive Power Pulley Kit. The Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

1995 E36 325i/is Stage 2 Performance Package includes:
aFe Cold Air Intake (oiled cotton air filter, heat shield, intake tube)
Borla or Corsa Exhaust
TMS Stage 2 Performance Chip

Applications:
1995 E36 325i, 325is, 325ic
Show More Show Less
E9X 335i/xi N54 Stage 1+ Turner Power Package
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:224335
Part#: TMS224335
Ships in 2 Business Days
$ 1,684.00 USD
$ 1,684.00 USD
2007-2010 E90/E92/E93 335i N54 Stage 1+ Performance Package
Peak Power Gain*: up to 103hp / 108ft-lbs
+ aFe Pro5R Dual Cone Intake
+ Wagner Front Mount Intercooler
+ Cobb AccessPort programmer


More power = more heat. It's easy to make more power one time but to continue making that power consistently requires careful planning and design. With the additional boost the air entering the engine is also warmer, making the intercooler more important than ever. In testing, the stock BMW intercooler was quickly overwhelmed and cannot keep the intake air cool enough. The engine computer recognizes that and dials back the boost. A more efficient intercooler will keep boost levels up, delivering consistently higher boost levels. The Stage 1+ package includes a Wagner Evo I plug and play intercooler upgrade. We get great feedback from our customers and technicians about the Wagner FMIC - it's a direct bolt in part using all of the factory piping and it offers 85% more surface area than the factory intercooler.

The aFe Dual Cone intake and Cobb Accessport programmer complete the Stage 1+ package. The larger surface area of the aFe cone filters allows more air to enter the engine - creating more power and torque, a richer engine sound, and better throttle response. The kit is supplied complete with aFe Pro5R filters, mounting shield, intake tubes, sealing materials, hardware, and install instructions. The torque increase and sound from the open intake from low-mid RPM is sensational.

The Cobb software tool puts multiple tuning stages in the palm of your hand. Our Stage 1+ package lines up with the Cobb Stage 1 tuning maps for an intake and FMIC (91 or 93+ octane fuel). Simply download the Stage 1+ map from the Cobb website, plug it in, and install. Select different maps for other upgrades, throttle settings, octane ratings, valet mode, or revert back to stock! If you're moving up in Stages simply download a new file from the Cobb website and update your AccessPort programmer! The AccessPort triples as a diagnostic tester/reader and a data logger. It's the most feature-packed programmer on the market today.

We have taken the guesswork out of choosing the best upgrades for the N54 engine. If you follow the upgrade path we have laid out you will have very satisfying and reliable results. The addition of the larger intercooler makes Stage 1 more enjoyable and won't let you down at the track or dragstrip. * Note that peak power gains are quoted remain the same as Stage 1 but the cooler intake air means there is less of a chance the engine computer will cut power from heatsoak.

This item fits the following BMWs:
2007-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2010 E92 BMW 335i 335is* 335xi 335i xDrive - Coupe
2007-2010 E93 BMW 335i - Convertible
* 335is horsepower gains are lower due to the factory power boost in the "is" package
Show More Show Less


E36 325i/is 93-94 Stage 3 Turner Motorsport Performance Package ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:338676
Part#: TMS2902
Ships in 10 Business Days
Sale - Save 5% $ 2,183.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 2,074.79 USD
Sale - Save 5%
$ 2,183.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 2,074.79 USD
1993-94 E36 325i/is Stage 3 Performance Package
Peak Power Gain: +40hp / +32ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 3 kit features a cold-air intake kit, cat-back exhaust, performance software, and is tuned for stock M3 cams (not included in Package, can be added below). This whole package has been precisely tuned to work together and make the most power with as little downside.

The aFe intake is made with heat-blocking materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFe uses an oiled cotton air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

We can supply this Package with either a Borla or Corsa exhaust system. Both are stainless steel cat-back sections with dual tips. The Borla is a little more mellower sound than the Corsa. The Corsa makes a deep, aggressive burble that is a bit on the loud side but not over-the-top. Both are very light weight with the Borla weighing only 28lbs.

The difference between Stage 2 and Stage 3 is that the software we supply is also tuned for the M3 camshaft upgrade. Adding the stock cams from the S50 and S52 M3 engine is a big wake-up call on the 325i motor. You can expect big power gains in the top end. The M3 cams are a perfect blend of power and driveability - you lose almost nothing in low-end torque.

Our TMS Performance Chips include specific tuning for each part of the Package. The chip is the safest and easiest way to get big power from your engine. Our chips require premium fuel (91 or higher) and allow us to alter the settings on the engine management. Because we can be more aggressive in our tuning, we can get a lot of horsepower for very little money.

Related Upgrades: Within any Stage, we recommend our Underdrive Power Pulley Kit. The Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

1993-94 E36 325i/is Stage 3 Performance Package includes:
aFe Cold Air Intake (oiled cotton filter, heat shield, intake tube)
Borla or Corsa Exhaust
TMS Stage 2 Performance Chip (tuned for intake, exhaust, M3 cams)

E36 M3 Camshafts
We sell this Package without cams. Used M3 cams can be found from various sources (eBay, forums, etc). We can supply you with new, factory M3 cams or the Schrick equivalent (same specs as factory M3). Select one of these options below.

Applications:
1993-94 E36 325i, 325is, 325ic
Show More Show Less
E60 535i/xi 07-10 Stage 1 Motorsport Performance Package
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:338763
Part#: TMS11770
Ships in 2 Business Days
Starting at $ 1,194.00 USD
Free Shipping
Starting at $ 1,194.00 USD
Free Shipping
2007-2010 E60 535i/535xi Stage 1 Performance Package
Peak Power Gain: +65hp / +99ft-lbs
Octane: 91 or higher

Our Stage 1 kit features a cold-air intake kit and performance software for a staggering increase in power and torque. We offer this package with the aFe Dual Cone Intake (DCI) to open up the breathing. The larger surface area of the filters allows more air to enter the engine - creating more power and torque, a richer engine sound, and better throttle response. The kit is supplied complete with aFe Pro5R filters, mounting shield, intake tubes, sealing materials, hardware, and install instructions. The torque increase from low-mid RPM is sensational.

We have paired the aFe DCI with the Cobb AccessPort performance software. The Cobb software tool puts multiple tuning stages in the palm of your hand. Our Stage 1 Performance Package is aligned with the Cobb Stage 1 tuning map. Simply plug it in, select the Stage 1 map with your octane preference, and install. Select different maps for other upgrades, throttle settings, octane ratings, valet mode, or revert back to stock! If you're moving up in Stages simply download a new file from the Cobb website and update your AccessPort programmer! The AccessPort triples as a diagnostic tester/reader and a data logger. It's the most feature-packed programmer on the market today.

We have taken the guesswork out of choosing the best upgrades for the N54 engine. If you follow the upgrade path we have laid out you will have very satisfying and reliable results. This Stage 1 package is a great 'bang for the buck' upgrade - this power kit makes more power and torque at every RPM and makes a fantastic snarling sound every time you dip into the throttle. Note that peak power gains are quoted above but this package has even bigger performance gains in the lower RPM!!

E60 535i, 535xi Stage 1 Engine Upgrade includes:
aFe Dual-Cone Intake (filter, mounting shield, intake tubes)
Cobb AccessPort Performance Programmer

This item fits the following BMWs:
2007-2010 E60 BMW 535i 535xi 535i xDrive
Show More Show Less
E82 135i N54 Stage 1+ Turner Power Package
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:224338
Part#: TMS224338
Ships in 2 Business Days
$ 1,194.00 USD
Free Shipping
$ 1,194.00 USD
Free Shipping
2008-2010 E82 135i N54 Stage 1+ Performance Package
Peak Power Gain*: up to 103hp / 108ft-lbs
+ aFe Pro5R Dual Cone Intake
+ Cobb AccessPort programmer


The aFe Dual Cone intake and Cobb Accessport programmer complete the Stage 1+ package. The larger surface area of the aFe cone filters allows more air to enter the engine - creating more power and torque, a richer engine sound, and better throttle response. The kit is supplied complete with aFe Pro5R filters, mounting shield, intake tubes, sealing materials, hardware, and install instructions. The torque increase and sound from the open intake from low-mid RPM is sensational.

The Cobb software tool puts multiple tuning stages in the palm of your hand. Our Stage 1+ package lines up with the Cobb Stage 1 tuning maps for an intake and FMIC (91 or 93+ octane fuel). Simply download the Stage 1+ map from the Cobb website, plug it in, and install. Select different maps for other upgrades, throttle settings, octane ratings, valet mode, or revert back to stock! If you're moving up in Stages simply download a new file from the Cobb website and update your AccessPort programmer! The AccessPort triples as a diagnostic tester/reader and a data logger. It's the most feature-packed programmer on the market today.

We have taken the guesswork out of choosing the best upgrades for the N54 engine. If you follow the upgrade path we have laid out you will have very satisfying and reliable results. The addition of the larger intercooler makes Stage 1 more enjoyable and won't let you down at the track or dragstrip. * Note that peak power gains are quoted remain the same as Stage 1 but the cooler intake air means there is less of a chance the engine computer will cut power from heatsoak.

This item fits the following BMWs:
2008-2010 E82 BMW 135i (N54 engine)
Show More Show Less

E90 325i/xi 06 Stage 1 Turner Motorsport Performance Package ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:391353
Part#: E90325-ST1
Ships in 3 Business Days
Sale - Save 5% $ 1,130.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 1,074.43 USD
Free Shipping
Sale - Save 5%
$ 1,130.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 1,074.43 USD
Free Shipping

2006 E90 325i Stage 1 Performance Package
Peak Power Gain: +29hp / +29ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 1 kit featuring a cold-air intake kit and matching performance software. The aFe intake is a cone filter with a heat-blocking shield around it. The larger surface area of the filter, combined with the heat shield, allow more cool air to enter the engine - creating more power and torque, a richer engine sound, and better throttle response. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

Our flash software is tuned especially for a cold-air intake, maximizing the potential and providing smoother power delivery. We take the stock software and make adjustments for 91 octane (stock software is set around 87). We can get more power and torque, and increase fuel efficiency without affecting driveability or the life of the engine. The throttle response is also improved (quicker) eliminating unwanted and dangerous flat spots in the pedal response.

Our software fully maximizes the 'low-output' N52B30 engine in the 325i. Our software has been carefully developed on the dyno and the road to provide optimal power and torque gains at all RPM. We change the fuel, Valvetronic, and VANOS maps as well as revise the factory torque limiters. We have paid particular attention to increasing low and mid-range torque. The stock BMW software is hampered by settings for 87 octane fuel. By re-mapping the engine programming for 91 octane, we can make more power, torque, and improve fuel mileage - all without harm to the engine or affecting driveability. The throttle response is also improved (quicker) eliminating unwanted and dangerous flat spots in the pedal response.

There are two ways to install our software: mailing the ECU to us for a reflash or do-it-yourself install with our Turner Flash tool:

Mail-In Reflash - lower upfront cost but additional shipping charges. Minimum downtime of at least three days. We have a 24 hour turnaround on shipping the ECU back to you but factor in transit time. Expert installation of your software at our facility.
Turner Flash DIY tool - higher upfront cost but files are emailed back and forth. No downtime - you can still drive the car while we process your tune. Files are emailed back and forth - your stock file comes to us, a tuned file is returned to you. Easy install via Windows laptop. 

E90 325i Stage 1 Engine Upgrade includes:
aFe Cold Air Intake (filter, heat shield, intake tube)
Turner Motorsport Performance Software Flash

This item fits the following BMWs:
2006 E90 BMW 325i

Show More Show Less

E46 323i/323ci 99-00 Stage 1 Turner Motorsport Performance Package ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:2835
Part#: TMS2835
Ships in 3 Business Days
Sale - Save 5% $ 916.95

This product was last offered at the strikethrough price on
05-03-2026

$ 871.10 USD
Free Shipping
Sale - Save 5%
$ 916.95

This product was last offered at the strikethrough price on
05-03-2026

$ 871.10 USD
Free Shipping
1999-2000 E46 323i/Ci Stage 1 Performance Package
Peak Power Gain: +17hp / +8ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 1 kit featuring a cold-air intake kit and matching performance software. The aFe intake is made with heat-blocking materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFe uses an oiled cotton filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

The software is tuned by BMW tuning whiz Jim Conforti and supplied with the Shark Injector. The Shark Injector is a do-it-yourself reflash tool that plugs into the OBD diagnostic plug in your dash. With the push of a button, it will copy your stock software and reflash your computer with the performance tune. You can set it back to stock at any time by following the same procedure.

Both of these items are packaged and work together. They provide a solid performance boost with a low upfront cost. For an excellent 'bang for the buck' upgrade, the software and intake are a great choice (TMS Underdrive Pulleys would also be on that list).

Related Upgrades: We are often asked what would complement our software and intake packages. Within any Stage, we recommend our Underdrive Power Pulley Kits. The Power Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

We also recommend upgrading the cat-back muffler for slightly more performance, lighter weight, and a more-aggressive sound. Our favorite E46 mufflers are the Supersprint, Borla, or Corsa exhausts. The Supersprint is the quietest and most like stock while the Corsa is the most aggressive (Borla being in the middle). You can expect a gain of 5whp with any of these exhausts.

1999-2000 E46 323i/Ci Stage 1 Performance Package includes:
aFe Cold Air Intake (oiled cotton filter, heat shield, intake tube)
Shark Injector performance software

Applications:
1999-2000 E46 323i sedan, 323Ci coupe and convertible
Show More Show Less
E46 325i/325ci/325xi 01-06 Stage 1 Turner Motorsport Performance Pack...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:2849
Part#: TMS2849
Ships in 3 Business Days
Sale - Save 3% $ 751.99

This product was last offered at the strikethrough price on
05-03-2026

$ 729.43 USD
Free Shipping
Sale - Save 3%
$ 751.99

This product was last offered at the strikethrough price on
05-03-2026

$ 729.43 USD
Free Shipping
2001-2006 E46 325i/Ci/Xi/iT (M54 engine) Stage 1 Performance Package
Peak Power Gain: +8hp / +8ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 1 kit featuring a cold-air intake kit and matching performance software. The aFe intake is a cone filter with a heat-blocking shield around it. The larger surface area of the filter, combined with the heat shield, allow more cool air to enter the engine - creating more power and torque, a richer engine sound, and better throttle response. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

The software is tuned by BMW tuning whiz Jim Conforti and supplied with the Shark Injector. The Shark Injector is a do-it-yourself reflash tool that plugs into the OBD diagnostic plug in your dash. With the push of a button, it will copy your stock software and reflash your computer with the performance tune. You can set it back to stock at any time by following the same procedure.

Both of these items are packaged and work together. They provide a solid performance boost with a low upfront cost. For an excellent 'bang for the buck' upgrade, the software and intake are a great choice (TMS Underdrive Pulleys would also be on that list).

Related Upgrades: We are often asked what would complement our software and intake packages. Within any Stage, we recommend our Underdrive Power Pulley Kits. The Power Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

We also recommend upgrading the cat-back muffler for slightly more performance, lighter weight, and a more-aggressive sound. Our favorite E46 mufflers are the Supersprint, Borla, or Corsa exhausts. The Supersprint is the quietest and most like stock while the Corsa is the most aggressive (Borla being in the middle). You can expect a gain of 5whp with any of these exhausts.

2001-2006 E46 325i/Ci/Xi/iT (M54 engine) Stage 1 Engine Upgrade includes:
aFe Cold Air Intake (filter, heat shield, intake tube)
Shark Injector performance software

Applications:
2001-2006 E46 325i sedan, 325Ci coupe and convertible, 325Xi sedan, 325iT wagon, 325XiT wagon ( M54 engine only).
Show More Show Less

E46 328i/328ci 99-00 Stage 1 Turner Motorsport Performance Package ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:2848
Part#: TMS2848
Ships in 3 Business Days
Sale - Save 3% $ 751.99

This product was last offered at the strikethrough price on
05-03-2026

$ 729.43 USD
Free Shipping
Sale - Save 3%
$ 751.99

This product was last offered at the strikethrough price on
05-03-2026

$ 729.43 USD
Free Shipping
1999-2000 E46 328i/Ci Stage 1 Performance Package
Peak Power Gain: +14hp / +11ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 1 kit featuring a cold-air intake kit and matching performance software. The aFe intake is made with heat-blocking materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFe uses an oiled cotton air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

The software is tuned by BMW tuning whiz Jim Conforti and supplied with the Shark Injector. The Shark Injector is a do-it-yourself reflash tool that plugs into the OBD diagnostic plug in your dash. With the push of a button, it will copy your stock software and reflash your computer with the performance tune. You can set it back to stock at any time by following the same procedure.

Both of these items are packaged and work together. They provide a solid performance boost with a low upfront cost. For an excellent 'bang for the buck' upgrade, the software and intake are a great choice (TMS Underdrive Pulleys would also be on that list).

Related Upgrades: We are often asked what would complement our software and intake packages. Within any Stage, we recommend our Underdrive Power Pulley Kits. The Power Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

We also recommend upgrading the cat-back muffler for slightly more performance, lighter weight, and a more-aggressive sound. Our favorite E46 mufflers are the Supersprint, Borla, or Corsa exhausts. The Supersprint is the quietest and most like stock while the Corsa is the most aggressive (Borla being in the middle). You can expect a gain of 5whp with any of these exhausts.

1999-2000 E46 328/Ci Stage 1 Engine Upgrade includes:
aFe Cold Air Intake (oiled cotton air filter, heat shield, intake tube)
Shark Injector performance software

Applications:
1999-2000 E46 328 sedan, 328Ci coupe and convertible
Show More Show Less
E39 528i 99-00 Stage 1 Turner Motorsport Performance Package ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:2888
Part#: TMS2888
In Stock at Vendor
Sale - Save 4% $ 741.70

This product was last offered at the strikethrough price on
01-03-2026

$ 713.92 USD
Sale - Save 4%
$ 741.70

This product was last offered at the strikethrough price on
01-03-2026

$ 713.92 USD
1999-2000 E39 528i Stage 1 Performance Package
Peak Power Gain: +14hp / +11ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 1 kit featuring a cold-air intake kit and matching performance software. The aFe intake is a cone filter with a heat-blocking shield around it. The larger surface area of the filter, combined with the heat shield, allow more cool air to enter the engine - creating more power and torque, a richer engine sound, and better throttle response. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

The software is tuned by BMW tuning whiz Jim Conforti and supplied with the Shark Injector. The Shark Injector is a do-it-yourself reflash tool that plugs into the OBD diagnostic plug in your dash. With the push of a button, it will copy your stock software and reflash your computer with the performance tune. You can set it back to stock at any time by following the same procedure.

Both of these items are packaged and work together. They provide a solid performance boost with a low upfront cost. For an excellent 'bang for the buck' upgrade, the software and intake are a great choice (TMS Underdrive Pulleys would also be on that list).

Related Upgrades: We are often asked what would complement our software and intake packages. Within any Stage, we recommend our Underdrive Power Pulley Kits. The Power Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

1999-2000 E39 528i Stage 1 Engine Upgrade includes:
aFe Cold Air Intake (filter, heat shield, intake tube)
Shark Injector performance software

Applications:
1999-2000 E39 528i sedan (M52tu engine)
Show More Show Less

E36 328i/is 96-99 Stage 3+ Turner Motorsport Performance Package ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:2896
Part#: TMS2896
Ships in 1-2 days
Sale - Save 3% $ 1,154.95

This product was last offered at the strikethrough price on
05-03-2026

$ 1,120.30 USD
Free Shipping
Sale - Save 3%
$ 1,154.95

This product was last offered at the strikethrough price on
05-03-2026

$ 1,120.30 USD
Free Shipping
1996-99 E36 328i/ic/is Stage 3+ Performance Package
Peak Power Gain: +34hp / +12ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 3+ kit is setup around the best upgrades to make power on the M52 engine: cold-air intake kit, M50 manifold, M3-spec cams, and performance software.

We sell this kit a number of different ways. The base Stage 3+ Performance Package includes:
aFe Cold Air Intake (oiled cotton filter, heat shield, intake tube)
M50 manifold adapter kit (M50 manifold not included)
TMS Shark Injector performance software

Optional Items:
New stock E36 M3 camshafts (or Schrick equivalent)
M50 manifold
Modified fuel rail cover (clears the fuel injectors with M50 manifold)

Adding the M50 manifold produces huge power gains in the upper RPM. If you spend the majority of your time over 5000 RPM, you're going to love this kit. The parts in Stage 3+ are our most-popular performance upgrades for the E36 328i: intake, cams, software, complemented by the M50 manifold. Stage 3+ shifts the focus entirely to the top end of the RPM. With the change in the manifold there is not much of a mid-range torque increase. The Conforti software keeps any torque loss to a minimum.

The software is also Conforti-tuned and supplied with the Shark Injector software loader. The Shark Injector is a do-it-yourself reflash tool that plugs into the diagnostic plug in the engine bay. With the push of a button, it will copy your stock software and reflash your computer with the performance tune. You can set it back to stock at any time by following the same procedure.

The aFe intake is made with heat-blocking materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFe uses an oiled cotton air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, carbon fiber intake tube, sealing materials, hardware, and install instructions.

Related Upgrades: We are often asked what would complement our software and intake packages. Within any Stage, we recommend our Underdrive Power Pulley Kits. The Power Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

We also recommend upgrading the cat-back muffler for slightly more performance, lighter weight, and a more-aggressive sound. Our favorite E36 mufflers are the Supersprint, Borla, or Corsa exhausts. The Supersprint is the quietest and most like stock while the Corsa is the most aggressive (Borla being in the middle). You can expect a gain of 5whp with any of these exhausts.

1996-99 E36 328i/ic/is Stage 3+ Performance Package includes:
aFe Cold Air Intake (oiled cotton filter, heat shield, intake tube)
M50 manifold adapter kit (M50 manifold not included)
Shark Injector Stage 3+ performance software

This Package requires additional parts, sourced or sold separately:
Stock E36 M3 camshafts (or Schrick equivalent)
Modified fuel rail cover (clears the fuel injectors with M50 manifold)
M50 manifold
TMS can supply all of these parts for you or you can source your own. Contact us before or after your order about the availability and cost of these parts.

Applications:
1996-1999 E36 328i sedan, 328i cabrio, 328is coupe
Show More Show Less

Turner E82/E9X N55 2009-11 Performance Package - Stage 1
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:582813
Part#: N55S1PPKT1
Ships in 7 Business Days
$ 781.99 USD
Free Shipping
$ 781.99 USD
Free Shipping
If you want to get the most out of your BMW's N55 3.0L, it is important to have the proper supporting modifications to achieve your goals. We have built out our power packages that include all the needed items to build upon each other for the best possible power gains. This kit includes a performance K&N air filter to eliminate the first point of possible restriction, a Pheonix Racing aluminum performance charge pipe for increase flow, and a Burger Motorsports JB4 tuner module to manage your power gains every step of the way. Not for sale or use in the state of California.
Show More Show Less
Turner E82/E9X N55 2012+ Performance Package - Stage 2
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:582814
Part#: N55S2PPKT
Ships in 7 Business Days
$ 1,767.00 USD
$ 1,767.00 USD
If you want to get the most out of your BMW's N55 3.0L, it is important to have the proper supporting modifications to achieve your goals. We have built out our power packages that include all the needed items to build upon each other for the best possible power gains. This kit includes all of the similar components as the Stage 1 kit: a Pheonix Racing aluminum performance charge pipe for increased flow and a Burger Motorsports JB4 tuner module to manage your power gains every step of the way. Stage 2 adds the Wagner EVO 2 intercooler that allows for a 90% increase in airflow volume. To handle this increase in airflow, Stage 2 also includes a new BMS Intake to increase airflow without restriction. Not for sale or use in the state of California.
Show More Show Less
Turner E82/E9X N55 2012+ Performance Package - Stage 1
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:582812
Part#: N55S1PPKT
Ships in 7 Business Days
$ 781.99 USD
Free Shipping
$ 781.99 USD
Free Shipping
If you want to get the most out of your BMW's N55 3.0L, it is important to have the proper supporting modifications to achieve your goals. We have built out our power packages that include all the needed items to build upon each other for the best possible power gains. This kit includes a performance K&N air filter to eliminate the first point of possible restriction, a Pheonix Racing aluminum performance charge pipe for increase flow, and a Burger Motorsports JB4 tuner module to manage your power gains every step of the way. Not for sale or use in the state of California.
Show More Show Less


Turner E82/E9X N55 2012+ Performance Package - Stage 3
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:582816
Part#: N55S3PPKT
Ships in 7 Business Days
$ 2,535.00

This product was last offered at the strikethrough price on
04-20-2026

$ 2,257.00 USD
$ 2,257.00 USD
If you want to get the most out of your BMW's N55 3.0L, it is important to have the proper supporting modifications to achieve your goals. We have built out our power packages that include all the needed items to build upon each other for the best possible power gains. This kit includes all of the similar components as the Stage 2 kit: a Pheonix Racing aluminum performance charge pipe for increased flow, a Burger Motorsports JB4 tuner module to manage your power gains every step of the way, a Wagner EVO 2 intercooler, and a BMS high flow intake. Stage 3 adds a Wagner catted high flow downpipe to increase exhaust flow for maximum power. Not for sale or use in the state of California.
Show More Show Less
E9X 335i/xi N54 Stage 2+ Turner Power Package
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:339942
Part#: TMS224337
Ships in 8 Business Days
Starting at $ 2,630.84 USD
Starting at $ 2,630.84 USD

2007-2010 E90/E92/E93 335i N54 Stage 2+ Power Package (for race-use only)
Peak Power Gain*: up to 125hp / 158ft-lbs
+ aFe Pro5R Dual Cone Intake
+ CP-E Catless Downpipes
+ Wagner Front Mount Intercooler
+ Cobb AccessPort programmer

For a 335i race or competition car, the exhaust is an important area for upgrades. Removing the catalytic converters eliminates a choke point in the exhaust system and will free up power and torque. It also eliminates the cats as a potential failure point - a broken up cat can clog the exhaust and severly damage your motor. These cat-less DP from CP-E are some of the best we have seen. They are made from 304 stainless steel mandrel-bent piping. The flow characteristics of the piping was especially important to maximize the efficiency of the turbos. With less restriction the turbos work more efficiently and last longer.

In this package we also address the shortcomings in the factory intercooler setup. With higher boost comes more heat in the intake air and the factory intercooler does a poor job of cooling that air before it enters the engine. In the Stage 2+ package we offer multiple intercooler upgrades in increasing levels of capacity - Wagner Evo I or Wagner Evo II FMIC. Each is a significant upgrade over the stock 335i FMIC. The Wagner Evo I is our standard FMIC upgrade and fits with the stock piping and requires no modification for fitment. The Wagner Evo II has greater cooling capacity and silicone piping to the stock intake. Some minor modification to plastic trim pieces is required for installation. 

The aFe Dual Cone intake and Cobb Accessport programmer complete the Stage 2+ package. The larger surface area of the aFe cone filters allows more air to enter the engine - creating more power and torque, a richer engine sound, and better throttle response. The kit is supplied complete with aFe Pro5R filters, mounting shield, intake tubes, sealing materials, hardware, and install instructions. The torque increase and sound from the open intake from low-mid RPM is sensational.

The Cobb software tool puts multiple tuning stages in the palm of your hand. Our Stage 2+ package lines up with the Cobb Stage 2+ tuning maps for an intake and DP (91 or 93+ octane fuel). Simply download the Stage 2+ race map from the Cobb website, plug it in, and install. Select different maps for other upgrades, throttle settings, octane ratings, valet mode, or revert back to stock! If you're moving among Stages simply download a new file from the Cobb website and update your AccessPort programmer! The AccessPort triples as a diagnostic tester/reader and a data logger. It's the most feature-packed programmer on the market today.

* Note that peak power gains are quoted remain the same as Stage 2 but the cooler intake air means there is less of a chance the engine computer will cut power from heatsoak. Adding a full exhaust (from the DP) will make this a Stage 3 kit in the Cobb tuning catalog.

 

This part alters or deletes the emissions equipment on your car. Because of this, we require a waiver of emissions compliance to be signed and either e-mailed or faxed to Turner Motorsport before shipping. You can download the waiver here.


This item fits the following BMWs:
2007-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2010 E92 BMW 335i 335is* 335xi 335i xDrive - Coupe
2007-2010 E93 BMW 335i - Convertible
* 335is horsepower gains are lower due to the factory power boost in the "is" package

Show More Show Less
E82 135i N54 Stage 2+ Turner Power Package
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:340219
Part#: TMS224340
Ships in 8 Business Days
Starting at $ 2,630.84 USD
Starting at $ 2,630.84 USD
2008 E82 135i N54 Stage 2+ Power Package (for race-use only)
Peak Power Gain*: up to 125hp / 158ft-lbs
+ aFe Pro5R Dual Cone Intake
+ CP-E Catless Downpipes
+ Wagner or AA Front Mount Intercooler
+ Cobb AccessPort programmer


For a 135i race or competition car, the exhaust is an important area for upgrades. Removing the catalytic converters eliminates a choke point in the exhaust system and will free up power and torque. It also eliminates the cats as a potential failure point - a broken up cat can clog the exhaust and severly damage your motor. These cat-less DP from CP-E are some of the best we have seen. They are made from 304 stainless steel mandrel-bent piping. The flow characteristics of the piping was especially important to maximize the efficiency of the turbos. With less restriction the turbos work more efficiently and last longer.

In this package we also address the shortcomings in the factory intercooler setup. With higher boost comes more heat in the intake air and the factory intercooler does a poor job of cooling that air before it enters the engine. In the Stage 2+ package we offer multiple intercooler upgrades in increasing levels of capacity - Wagner Evo I, Wagner Evo II, and Active Autowerke Race FMIC. Each is a significant upgrade over the stock 135i FMIC. The Wagner Evo I is our standard FMIC upgrade and fits with the stock piping and requires no modification for fitment. The Wagner Evo II has greater cooling capacity and silicone piping to the stock intake. Some minor modification to plastic trim pieces is required for installation. The AA Race FMIC is the biggest and most extensive that we sell. It features a ram-air effect thanks to a special shroud around the intercooler. The installation is more extensive because AA has chosen to locate the FMIC where it will catch the most airflow from the car's frontal area.

The aFe Dual Cone intake and Cobb Accessport programmer complete the Stage 2+ package. The larger surface area of the aFe cone filters allows more air to enter the engine - creating more power and torque, a richer engine sound, and better throttle response. The kit is supplied complete with aFe Pro5R filters, mounting shield, intake tubes, sealing materials, hardware, and install instructions. The torque increase and sound from the open intake from low-mid RPM is sensational.

The Cobb software tool puts multiple tuning stages in the palm of your hand. Our Stage 2+ package lines up with the Cobb Stage 2+ tuning maps for an intake and DP (91 or 93+ octane fuel). Simply download the Stage 2+ race map from the Cobb website, plug it in, and install. Select different maps for other upgrades, throttle settings, octane ratings, valet mode, or revert back to stock! If you're moving among Stages simply download a new file from the Cobb website and update your AccessPort programmer! The AccessPort triples as a diagnostic tester/reader and a data logger. It's the most feature-packed programmer on the market today.

* Note that peak power gains are quoted remain the same as Stage 2 but the cooler intake air means there is less of a chance the engine computer will cut power from heatsoak. Adding a full exhaust (from the DP) will make this a Stage 3 kit in the Cobb tuning catalog.

This part alters or deletes the emissions equipment on your car. Because of this, we require a waiver of emissions compliance to be signed and either e-mailed or faxed to Turner Motorsport before shipping. You can download the waiver here.

This item fits the following BMWs:
2008-2010 E82 BMW 135i (N54 engine)
Show More Show Less

S54 Power Pack
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:402451
Part#: S54-PPK-1
Ships on Oct 6, 2026
Sale - Save 17% $ 1,099.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 917.67 USD
Free Shipping
Sale - Save 17%
$ 1,099.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 917.67 USD
Free Shipping
Everything you need to begin making your E46 M3 the track monster of your dreams. The S54 Power Pack is our curated list of bolt-on upgrades that will unleash the true potential of your motor. 
Show More Show Less

E46 325i/ci 03-05 Stage 1 Turner Motorsport Performance Package ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:3593
Part#: TMS3593
Ships on Aug 11, 2026
Sale - Save 10% $ 916.95

This product was last offered at the strikethrough price on
05-03-2026

$ 825.26 USD
Free Shipping
Sale - Save 10%
$ 916.95

This product was last offered at the strikethrough price on
05-03-2026

$ 825.26 USD
Free Shipping
2003-2005 E46 325i/Ci (M56 SULEV engine) Stage 1 Performance Package
Peak Power Gain: +8hp / +8ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 1 kit featuring a cold-air intake kit and matching performance software. The aFe intake is made with heat-blocking materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFe uses an oiled cotton air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

The software is tuned by BMW tuning whiz Jim Conforti and supplied with the Shark Injector. The Shark Injector is a do-it-yourself reflash tool that plugs into the OBD diagnostic plug in your dash. With the push of a button, it will copy your stock software and reflash your computer with the performance tune. You can set it back to stock at any time by following the same procedure.

Both of these items are packaged and work together. They provide a solid performance boost with a low upfront cost. For an excellent 'bang for the buck' upgrade, the software and intake are a great choice (TMS Underdrive Pulleys would also be on that list).

Related Upgrades: We are often asked what would complement our software and intake packages. Within any Stage, we recommend our Underdrive Power Pulley Kits. The Power Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

We also recommend upgrading the cat-back muffler for slightly more performance, lighter weight, and a more-aggressive sound. Our favorite E46 mufflers are the Supersprint, Borla, or Corsa exhausts. The Supersprint is the quietest and most like stock while the Corsa is the most aggressive (Borla being in the middle). You can expect a gain of 5whp with any of these exhausts.

2003-2005 E46 325i/Ci (M56 engine) Stage 1 Engine Upgrade Kit includes:
aFe Cold Air Intake (oiled cotton filter, heat shield, intake tube)
Shark Injector performance software

Applications:
2003-2005 E46 325i sedan, 325Ci coupe ( M56 SULEV engine only. )
Show More Show Less
Turner Motorsport E46 M3 Power Pack - Stage 2
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:586779
Part#: E46M3PP2
Ships on Aug 11, 2026
Sale - Save 13% $ 1,355.99

This product was last offered at the strikethrough price on
01-03-2026

Starting at $ 1,186.09 USD
Free Shipping
Sale - Save 13%
$ 1,355.99

This product was last offered at the strikethrough price on
01-03-2026

Starting at $ 1,186.09 USD
Free Shipping
The E46 M3 was one of the most versatile cars ever produced. Want a car that handles well, is comfortable, and is perfect for driving down twisting roads on the weekend? E46 M3. Or how about something you can take to weekend track days and enjoy without any major modifications? E46 M3. Maybe you want to go full race car? E46 M3! The reliability, power, and handling characteristics made this car a legend that is still highly sought after, not to mention how amazing this car looks. Whatever your needs may be, we have a number of Turner Power Packs designed to start building the M3 of your dreams. We offer everything from Stage 1 to Stage 4+, and even a Track Inspired Power Pack designed for the ultimate in performance needs! This stage 2 kit offers the following upgrades: aFe Performance Intake Kit Pro5r - Increase airflow volume to increase performance at all RPMs Shark Injector Performance Software - Tune your car for optimal performance, perfectly paired with any and all modifications Turner Motorsport Power Pulley Kit (2 Options) - Free up power that is normally stolen from accessories with underdrive pulleys Intake Air Temperature (IAT) Relocation Harness - Prevent heat soak and false air temperature readings to maintain proper timing and fuel mixture ratios
Show More Show Less

Turner Motorsport E46 M3 Power Pack - Stage 2+
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:586780
Part#: E46M3PP2P
Ships on Aug 11, 2026
Sale - Save 8% $ 1,922.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 1,777.09 USD
Free Shipping
Sale - Save 8%
$ 1,922.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 1,777.09 USD
Free Shipping
The E46 M3 was one of the most versatile cars ever produced. Want a car that handles well, is comfortable, and is perfect for driving down twisting roads on the weekend? E46 M3. Or how about something you can take to weekend track days and enjoy without any major modifications? E46 M3. Maybe you want to go full race car? E46 M3! The reliability, power, and handling characteristics made this car a legend that is still highly sought after, not to mention how amazing this car looks. Whatever your needs may be, we have a number of Turner Power Packs designed to start building the M3 of your dreams. We offer everything from Stage 1 to Stage 4+, and even a Track Inspired Power Pack designed for the ultimate in performance needs! This stage 2+ kit offers the following upgrades: Eventuri Carbon Fiber Intake Kit - Increase airflow volume to increase performance at all RPMs and make your engine bay look great with high-quality carbon fiber Shark Injector Performance Software - Tune your car for optimal performance, perfectly paired with any and all modifications Turner Motorsport Power Pulley Kit (2 Options) - Free up power that is normally stolen from accessories with underdrive pulleys Intake Air Temperature (IAT) Relocation Harness - Prevent heat soak and false air temperature readings to maintain proper timing and fuel mixture ratios
Show More Show Less
E39 525i 01-03 Stage 1 Turner Motorsport Performance Package ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:2893
Part#: TMS2893
Ships on Aug 11, 2026
Sale - Save 3% $ 824.95

This product was last offered at the strikethrough price on
05-03-2026

$ 800.20 USD
Sale - Save 3%
$ 824.95

This product was last offered at the strikethrough price on
05-03-2026

$ 800.20 USD
2001-2003 E39 525i Stage 1 Performance Package
Peak Power Gain: +8hp / +8ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 1 kit featuring a cold-air intake kit and matching performance software. The aFe intake is a cone filter with a heat-blocking shield around it. The larger surface area of the filter, combined with the heat shield, allow more cool air to enter the engine - creating more power and torque, a richer engine sound, and better throttle response. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

The software is tuned by BMW tuning whiz Jim Conforti and supplied with the Shark Injector. The Shark Injector is a do-it-yourself reflash tool that plugs into the OBD diagnostic plug in your dash. With the push of a button, it will copy your stock software and reflash your computer with the performance tune. You can set it back to stock at any time by following the same procedure.

Both of these items are packaged and work together. They provide a solid performance boost with a low upfront cost. For an excellent 'bang for the buck' upgrade, the software and intake are a great choice (TMS Underdrive Pulleys would also be on that list).

Related Upgrades: We are often asked what would complement our software and intake packages. Within any Stage, we recommend our Underdrive Power Pulley Kits. The Power Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

2001-2003 E39 525i Stage 1 Engine Upgrade includes:
aFe Cold Air Intake (filter, heat shield, intake tube)
Shark Injector performance software

Applications:
2001-2003 E39 525i sedan
Show More Show Less

Turner Motorsport E46 M3 Power Pack - Stage 1+
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:586778
Part#: E46M3PP1P
Ships on Aug 11, 2026
Sale - Save 3% $ 1,519.00

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 1,474.10 USD
Free Shipping
Sale - Save 3%
$ 1,519.00

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 1,474.10 USD
Free Shipping
The E46 M3 was one of the most versatile cars ever produced. Want a car that handles well, is comfortable, and is perfect for driving down twisting roads on the weekend? E46 M3. Or how about something you can take to weekend track days and enjoy without any major modifications? E46 M3. Maybe you want to go full race car? E46 M3! The reliability, power, and handling characteristics made this car a legend that is still highly sought after, not to mention how amazing this car looks. Whatever your needs may be, we have a number of Turner Power Packs designed to start building the M3 of your dreams. We offer everything from Stage 1 to Stage 4+, and even a Track Inspired Power Pack designed for the ultimate in performance needs! This stage 1+ kit offers the following upgrades: Eventuri Carbon Fiber Intake Kit - Increase airflow volume to increase performance at all RPMs and make your engine bay look great with high quality carbon fiber Shark Injector Performance Software - Tune your car for optimal performance, perfectly paired with any and all modifications
Show More Show Less

E53 X5 3.0 01-05 Stage 1 Turner Motorsport Performance Package ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:2923
Part#: TMS2923
Ships on Aug 11, 2026
Sale - Save 10% $ 824.95

This product was last offered at the strikethrough price on
05-03-2026

$ 742.46 USD
Free Shipping
Sale - Save 10%
$ 824.95

This product was last offered at the strikethrough price on
05-03-2026

$ 742.46 USD
Free Shipping
2001-2005 E53 X5 3.0-liter Stage 1 Performance Package
Peak Power Gain: +13hp / +7ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 1 kit featuring a cold-air intake kit and performance software. The aFE intake is made from high-quality materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFe's Stage 2 Intake uses an oiled cotton air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, ABS plastic intake tube, sealing materials, hardware, and install instructions.

The software is tuned by BMW tuning whiz Jim Conforti and supplied with the Shark Injector. The Shark Injector is a do-it-yourself reflash tool that plugs into the OBD diagnostic plug in your dash. With the push of a button, it will copy your stock software and reflash your computer with the performance tune. You can set it back to stock at any time by following the same procedure.

Both of these items work together to bring up huge torque increases and much improved driveability. They provide a solid performance boost with a low upfront cost. For an excellent 'bang for the buck' upgrade, the software and intake are a great choice.

2001-2005 E53 X5 3.0-liter Stage 1 Engine Upgrade includes:
aFe Cold Air Intake
Shark Injector performance software

Applications:
2001-2005 E53 X5 3.0-liter
Show More Show Less
E39 530i 01-03 Stage 1 Turner Motorsport Performance Package ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:2894
Part#: TMS2894
Ships on Aug 11, 2026
Sale - Save 4% $ 741.99

This product was last offered at the strikethrough price on
01-03-2026

$ 713.92 USD
Sale - Save 4%
$ 741.99

This product was last offered at the strikethrough price on
01-03-2026

$ 713.92 USD
2001-2003 E39 530i Stage 1 Performance Package
Peak Power Gain: +8hp / +10ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 1 kit featuring a cold-air intake kit and matching performance software. The aFe intake is a cone filter with a heat-blocking shield around it. The larger surface area of the filter, combined with the heat shield, allow more cool air to enter the engine - creating more power and torque, a richer engine sound, and better throttle response. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

The software is tuned by BMW tuning whiz Jim Conforti and supplied with the Shark Injector. The Shark Injector is a do-it-yourself reflash tool that plugs into the OBD diagnostic plug in your dash. With the push of a button, it will copy your stock software and reflash your computer with the performance tune. You can set it back to stock at any time by following the same procedure.

Both of these items are packaged and work together. They provide a solid performance boost with a low upfront cost. For an excellent 'bang for the buck' upgrade, the software and intake are a great choice (TMS Underdrive Pulleys would also be on that list).

Related Upgrades: We are often asked what would complement our software and intake packages. Within any Stage, we recommend our Underdrive Power Pulley Kits. The Power Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

2001-2003 E39 530i Stage 1 Engine Upgrade includes:
aFe Cold Air Intake (filter, heat shield, intake tube)
Shark Injector performance software

Applications:
2001-2003 E39 530i sedan
Show More Show Less
E36 M3 95 Stage 1 Turner Motorsport Performance Package
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:340160
Part#: E36EURO-ST1
Ships on Nov 25, 2026
$ 1,208.99

This product was last offered at the strikethrough price on
02-18-2026

Starting at $ 588.21 USD
Free Shipping on orders $49 and up
Starting at $ 588.21 USD
Free Shipping on orders $49 and up
E36 M3 OBD-I Stage 1 Performance Package
Peak Power Gain: +32hp / +23ft-lbs
Rev limit: 7000
Octane: 91 or higher

A fantastic upgrade package for the 1995 3.0-liter E36 M3! This special package combines some of our most popular upgrades for a lot of horsepower and less money!!! It�s a great bolt-on first step for big power gains without having to go into the engine for cams or head work.

We use the aFe 'Euro' Intake Kit, Bosch Euro HFM, and a special Conforti-TMS Performance Chip. This package retains the 3.0�s stock 17lb injectors (green top). The aFe intake is made with heat-blocking materials, reducing underhood temperatures and not contributing to heat soak of the air filter. The aFe Intake uses an oiled cloth air filter for maximum air flow and excellent filtration.

With the undersized stock air sensor, the M3 is gasping for breath. But with the larger 3.5� Euro HFM and Euro Intake, the M3�s engine can breathe a lot better. This kit works on all M3s with the US S50 3.0-liter engine. It will also work on the S52 3.2 if OBD-1 17lb injectors are used.Our TMS Performance Chips were also developed by Jim Conforti and tuned specifically for the Euro HFM and aFe Intake. Our chips require premium fuel (91 or higher) and allow us to alter the settings on the engine management. Because we can be more aggressive in our tuning, we can get a lot of horsepower for very little money.

Related Upgrades: We are often asked what would complement our software and intake packages. Within any Stage, we recommend our Underdrive Power Pulley Kits and a cat-back exhaust. The Power Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

We also recommend upgrading the cat-back muffler for slightly more performance, lighter weight, and a more-aggressive sound. Our favorite E36 M3 mufflers are the Supersprint, Borla, or Corsa exhausts. The Supersprint is the quietest and most like stock while the Corsa is the most aggressive (Borla being in the middle). You can expect a gain of 5whp with any of these exhausts.

Clickhere for feedback on this package.

1995 M3 Stage 1 Engine Upgrade Kit includes:
aFe 'Euro' Cold Air Intake
Euro 3.5" Bosch HFM / Mass Air Sensor
TMS Performance Chip (we need your car's production date, choose from below)


This kit is based on the 1995 M3's 17lb fuel injectors. If you have upgraded to 21.5lb injectors or are running a S52 3.2, see the Stage 1.5 Kit below. The 17lb injectors are barely adequate with the variable quality of fuel in the USA. Larger injectors are recommended to ensure enough high-quality octane to prevent knocking/detonation.

Applications:
1994-1995 E36 M3 3.0 liter

Show More Show Less


E39 M5 99-03 Stage 1 Turner Motorsport Performance Package
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:2916
Part#: TMS2916
Back Ordered
Sale - Save 3% $ 1,236.95

This product was last offered at the strikethrough price on
05-03-2026

$ 1,199.84 USD
Free Shipping
Sale - Save 3%
$ 1,236.95

This product was last offered at the strikethrough price on
05-03-2026

$ 1,199.84 USD
Free Shipping
1999-2003 E39 M5 Stage 1 Performance Package
Peak Power Gain: +18hp / +20ft-lbs
Rev limit: 7400
Octane: 91 or higher

Our Stage 1 kit featuring a cold-air intake kit and performance software. The aFE intake is made from high-quality materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFe's Stage 2 Intake uses an oiled cotton air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, ABS plastic intake tube, sealing materials, hardware, and install instructions.

The software is tuned by BMW tuning whiz Jim Conforti and supplied with the Shark Injector. The Shark Injector is a do-it-yourself reflash tool that plugs into the OBD diagnostic plug in your dash. With the push of a button, it will copy your stock software and reflash your computer with the performance tune. You can set it back to stock at any time by following the same procedure.

Both of these items work together to bring up huge torque increases and much improved driveability. They provide a solid performance boost with a low upfront cost. For an excellent 'bang for the buck' upgrade, the software and intake are a great choice.

1999-2003 E39 M5 Stage 1 Engine Upgrade includes:
aFe Cold Air Intake
Shark Injector performance software

Applications:
1999-2003 E39 M5 sedan
Show More Show Less
E30 M3 Evo III Fuel Injection Upgrade
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:4083
Part#: E30M3-EVOIII-INJ
Back Ordered
$ 2,318.99 USD
Free Shipping
$ 2,318.99 USD
Free Shipping
Our racing fuel injection upgrade for the E30 M3 2.5 consists of four Evo III fuel injectors, Evo III Air flow meter and custom calibrated performance chip. This kit was originally designed for use on the TMS 2.5 liter engine conversion with: Stage 3 head, Schrick cams, Evo III header and straight non cat exhaust but has been a successful upgrade on other variations of this set up. The addition of these components adds the ability to supply more fuel that the 2.5 liter high performance motor demands. Choose from 7800 or 8200 rpm redline (For off road/race use only).

Kit Includes:
1 x 13621466349 - Air Flow Meter
1 x Custom Turner Motorsport Peformance Chip
4 x 13641316511 - EVO 3 Fuel Injectors


This item fits the following BMWs:
1988-1991 E30 BMW M3
Show More Show Less