Oil Filter Housing Gasket KIT

T#:637846

Part#: 1142753729312KT1

In Stock

$ 97.99 USD

Add to Wish List

Qty

$ 97.99 USD

Add to Wish List

Over time gaskets become dry and brittle allowing oil to leak in your engine compartment. Replace this gasket and stop having to top off your oil every month. A common source of leaks on the N54/55 is the gaskets between the the thermostat plate and filter housing, and also the filter housing to engine block.

Show More Show Less

Complete Valve Cover Gasket Replacement Kit - M52/S52

T#:30164593

Part#: 11120034108KT3

In Stock

Sale - Save 8% $ 67.99

This product was last offered at the strikethrough price on
05-03-2026

$ 62.36 USD

Add to Wish List

Qty

Sale - Save 8%

$ 67.99

This product was last offered at the strikethrough price on
05-03-2026

$ 62.36 USD

Add to Wish List

Maintaining proper oil levels in your engine is crucial for peak performance. Undetected leaks can cause your oil to drop to dangerously low levels between oil changes, leading to severe engine damage.

One common culprit for oil leaks is the valve cover. Over time, exposure to extreme temperature fluctuations can wear down the gaskets, causing them to fail. Prevent oil leaks and protect your engine by replacing these vital components.

Comprehensive Kit Includes:

Valve Cover Perimeter Gasket Valve Cover Spark Plug Tube Gaskets 15 Rubber Grommets/Sealing Washers Ultra-Black RTV Gasket Maker Replace your old gaskets with our high-quality kit to keep your engine running smoothly and efficiently.

Show More Show Less

OEM Rear Main/Crankshaft Seal Kit E28, E30, E34, E36, E39, Z4 ...

T#:42099850

Part#: 11142247867TKT

In Stock

$ 45.99 USD

Add to Wish List

Qty

$ 45.99 USD

Add to Wish List

Protect your BMW engine and drivetrain with the OE Rear Main/Crankshaft Seal Kit, a critical upgrade for leak-free performance and longevity.

Oil Filter Housing Gasket Kit

T#:5403248

Part#: 11427537293TMSKT

In Stock

$ 97.99 USD

Add to Wish List

Qty

$ 97.99 USD

Add to Wish List

Includes gaskets and hardware to replace both oil filter housing gaskets. Over time gaskets become dry and brittle allowing oil to leak in your engine compartment. Replace this gasket and stop having to top off your oil every month. A common source of leaks on the N54/55 is the gaskets between the the thermostat plate and filter housing, and also the filter housing to engine block.

Show More Show Less

VR Oil Pan Gasket - E36 E46 E39 X3 X5 Z3 Z4

T#:1714

Part#: 11131437237

Ships in 4 Business Days

$ 27.99 USD

Add to Wish List

Qty

$ 27.99 USD

Add to Wish List

Oil Pan Gasket for all cars with M50, M52, M54, S50, S52 and S54 engines.
If you drive a European vehicle, chances are high your vehicle came equipped with one or more Victor Reinz gaskets. Choose OE quality VR gaskets and seals and do the job right the first time.

This item fits the following BMWs:
1992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
1991-1995 E34 BMW 525i
1997-2003 E39 BMW 525i 528i 530i
2004-2005 E60 BMW 525i 530i
2004-2005 E83 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
1996-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2005 E85 BMW Z4 2.5i Z4 3.0i
2006-2008 E85 BMW Z4 M Roadster M Coupe

Show More Show Less

N52 Oil Filter Housing Gasket Kit - Includes Oil Pressure Sensor ...

T#:15677580

Part#: 11427540759-KT

In Stock

Sale - Save 1% $ 45.99

This product was last offered at the strikethrough price on
05-03-2026

$ 45.73 USD

Add to Wish List

Qty

Sale - Save 1%

$ 45.99

This product was last offered at the strikethrough price on
05-03-2026

$ 45.73 USD

Add to Wish List

This kit includes: 1 Oil Filter Housing Gasket (11428637821) 1 M8x28 bolt (11427540759) 1 M8x43 bolt (11427540763) 1 M8x78 bolt (11427540758) 1 Oil Pressure Sensor (12617568480)

M57 Diesel Valve Cover Gasket Replacement Kit - BMW E70 E90 M57 3.0L ...

T#:20946753

Part#: 11122247447TMSKT

In Stock

Sale - Save 2% $ 149.99

This product was last offered at the strikethrough price on
05-03-2026

$ 147.60 USD

Add to Wish List

Qty

Sale - Save 2%

$ 149.99

This product was last offered at the strikethrough price on
05-03-2026

$ 147.60 USD

Add to Wish List

Eliminate your valve cover oil leaks! This M57 Valve Cover Gasket Replacement Kit includes all of the basic gaskets and seals necessary to replace your valve cover gasket and prevent further oil leaks. Included: Valve Cover Gaskets & Hardware Fuel Injector O-Rings (x6) Fuel Injector Gaskets (x6) Turbo Oil Line Seals (x6)

Show More Show Less

Valve Cover Gasket Overhaul Kit - E9X 328i, E60 528i, E83 X3 3.0i/si,...

T#:180875

Part#: TMS180875

In Stock

$ 142.24

This product was last offered at the strikethrough price on
05-07-2026

$ 107.33 USD

Add to Wish List

Qty

$ 107.33 USD

Add to Wish List

Not only will this kit stop most E90 oil leaks, it's the perfect addition for ignition coil or spark plug replacement! Oil leaks - and the damage they can cause - seem to be the worst annoyances on these cars. The biggest source of an oil leak is from the valve cover, followed by the oil filter housing, Valvetronic seal, camshaft seals, and the eccentric shaft sensor seal. Once the oil leaks, and if ignored for an extended time, the oil will contaminate vital electrical sensors. This is especially the case with ignition coils and also the eccentric shaft sensor on the Valvetronic shaft at the top of the cylinder head. During any ignition coil and spark plug replacement take a close look inside for any oil pooling at the bottom. We have been seeing valve cover oil leaks as soon as 40,000 miles. We look for oil leaks on every E90 that comes into our shop.

We have put together this package of valve cover gaskets and other related gaskets and seals for you to fully overhaul the N52 valve cover and put a stop to those pesky oil leaks. This package has the replacement parts for N52 engines built from the 2007 model year and includes:

11127582245 - N52 valve cover gasket set
11127552280 - N52 eccentric shaft sensor seal
11127559699 - N52 Valvetronic gasket

2007 and later N51/N52 engines do not need replacement valve cover bolts, unless the bolts are actually broken off or missing. Unlike the 2006 aluminum hardware, the later parts are steel and not 1-time use.

These are all OEM or OE parts. Replacement of these gaskets and seals is straight-forward but a long process. BMW dealers typically charge for over eight hours of labor. If you have replaced spark plugs before you should be capable of this repair. In addition, there are several other parts to replace while you're in the vicinity: camshaft sensor o-rings, oil filter housing profile gasket, VAN0S solenoids, and the eccentric shaft sensor. These other parts, except the eccentric shaft sensor (see below), are replaceable without removing the valve cover but are more easily accessed during the valve cover work.

Eccentric Shaft Sensor: This is the position sensor that relays the eccentric shaft's position back to the DME. It's located at the front of the engine and is only accessible with the valve cover off . The seal around the sensor can fail and allow oil to blow out from under the cam cover. Oil can then leak into the sensor itself and cause it to fail. Without a functioning sensor your E90 can experience poor running, hesitation, poor performance, jerky shifts, and sluggish response. It's easy to check and see if oil has accumulated inside the sensor: unbolt the engine trim cover (the outer cover with the BMW roundel), unplug the sensor, and look inside. If oil is present inside or even around the sensor itself, plan on replacing this sensor during your next ignition coil, spark plug, and/or valve cover gasket work.

This valve cover kit fits the following BMWs:
2008-2012 E82 BMW 128i
2007-2011 E90 BMW 328i 328xi 328i xDrive - Sedan
2007-2012 E91 BMW 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2013 E93 BMW 328i - Convertible
2007-2010 E60 BMW 528i 528xi 528i xDrive
2011 F10 BMW 528i
2007-2010 E83 BMW X3 3.0i X3 3.0si
2007-2013 E70 BMW X5 3.0si
10/2006-2008 E85 BMW Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive30i

Show More Show Less

Victor Reinz Valve Cover Gasket - E30, E34

T#:2065

Part#: 11121730229

In Stock

$ 42.99 USD

Add to Wish List

Qty

$ 42.99 USD

Add to Wish List

NOW LOCATED UNDER T#337956

Victor Reinz Crankshaft Seal (90 X 110 X 12)

T#:596059

Part#: 11142249533

In Stock

$ 46.40 USD

Add to Wish List

Qty

$ 46.40 USD

Add to Wish List

The engine crankcase in you car is filled with oil to keep everything lubricated, and to keep the oil inside of the engine, seals are used anywhere there is a seam in the engine, or any place a shaft protrudes from the engine. One such seal is the front main crankshaft seal. This seal is located around the the crankshaft at the front of the engine, and keeps oil from leaking out around the crankshaft. Unfortunately, over time seals will become brittle, crack and begin to leak due to their exposure to heat and oil.

Show More Show Less

Cometic "MLS" Multi Layer Steel Head Gasket - .070 Inch (1.778mm) - M...

T#:568674

Part#: C4328-070

In Stock

$ 245.99 USD

Add to Wish List

Qty

$ 245.99 USD

Add to Wish List

Cometic Head Gaskets are developed with the performance enthusiast in mind. With so many individual requirements for each motor, Cometic offers a number of options to suit your specific motor and needs. *MLS* The Cometic MLS gasket is comprised of three layers of Stainless Steel. Cometic uses Stainless steel for increased strength, it’s ability to rebound and corrosion resistance. The outer layers of the gasket are embossed and coated on both sides with a flouroelastomer rubber based material (Viton) designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The Viton coating is heat resistant to 2500C or 4820F. The center or shim layer of the gasket is comprised of an uncoated Stainless Steel layer, which can be varied to accommodate multiple thickness requirements. The MLS gasket is ideal for both aluminum heads to cast iron blocks and aluminum heads to aluminum blocks. The composition of MLS will also withstand the shearing forces created by aluminum heads on cast iron blocks. No re-torque is necessary. By design, the MLS gasket promotes an even torque load across the sealing surface allowing for measurably reduced bore distortion. *CFM-20* A perforated steel core with an elastomer surface is ideal for head gaskets allowing heat to be drawn evenly across the gasket surface while providing maximum sealing characteristics when exposed to coolants and oils.

Show More Show Less

BMW N52 Valve Cover & PCV Valve Refresh Kit

T#:21735875

Part#: VALVECVRN52KT

Ships in 3 Business Days

Sale - Save 11% $ 465.99

This product was last offered at the strikethrough price on
05-30-2026

$ 414.91 USD

Add to Wish List

Qty

Sale - Save 11%

$ 465.99

This product was last offered at the strikethrough price on
05-30-2026

$ 414.91 USD

Add to Wish List

Maintaining the peak performance and reliability of your BMW N52 engine is essential for a smooth and enjoyable driving experience. One of the most effective ways to achieve this is by replacing critical components like the valve cover, crankcase vent hose, angle connector with heating element, and cylinder sleeve. In this article, we'll delve into the numerous benefits of upgrading these vital parts, ensuring your BMW N52 operates at its best. Optimized Engine Performance: Replacing the valve cover, crankcase vent hose, angle connector, and cylinder sleeve enhances your BMW N52's engine performance. The valve cover plays a crucial role in sealing the engine, preventing oil leaks and ensuring optimal valve operation. When you upgrade these components, you reduce the risk of performance-robbing oil leaks and maintain precise valve timing, resulting in improved horsepower and torque. Enhanced Reliability: Reliability is paramount for any BMW owner. These components, when aged or damaged, can lead to severe engine issues. By replacing them, you significantly reduce the likelihood of unexpected breakdowns or costly repairs, ensuring your BMW N52 engine runs smoothly and reliably for years to come. Improved Fuel Efficiency: An efficiently operating engine not only performs better but also consumes less fuel. The replacement of these components leads to better combustion, reduced emissions, and ultimately improved fuel efficiency. This means fewer trips to the gas station and a lighter environmental footprint. Reduced Maintenance Costs: Regular maintenance and repairs can add up over time. By proactively replacing the valve cover, crankcase vent hose, angle connector, and cylinder sleeve, you mitigate the risk of more extensive engine damage that could lead to expensive repairs down the road. In the long term, this can translate into significant cost savings. Extended Engine Lifespan: The longevity of your BMW N52 engine is directly tied to the quality and condition of its components. When you invest in high-quality replacements, you're effectively extending the lifespan of your engine. This not only preserves the value of your BMW but also allows you to enjoy its performance for years to come. Precise Temperature Control: The angle connector with heating element is vital for maintaining optimal engine temperature, especially in cold weather. A malfunctioning or worn-out connector can disrupt temperature control, affecting engine performance. Replacing this component ensures consistent and precise temperature management. Customized Upgrades: When replacing these components, you have the opportunity to choose high-performance or specialized alternatives, allowing you to customize your BMW N52 to your preferences. Whether you prioritize power, efficiency, or specific driving conditions, there are options available to tailor your engine's performance accordingly. Included in the BMW N52 Valve Cover & PCV Valve Refresh Kit: 6 Cylinder Sleeves 1 Alternator Mounting Screw Set 1 Angle Connector with Heating Element 1 Valve Cover - Gasket Included 1 Crankcase Vent Hose

Show More Show Less

Victor Reinz Valve Cover Gasket - E46, Z3, Z4

T#:367409

Part#: 11127832034

In Stock

$ 48.03

This product was last offered at the strikethrough price on
07-28-2026

$ 41.99 USD

Add to Wish List

Qty

$ 41.99 USD

Add to Wish List

Victor / Reinz brand

Victor Reinz Upper Intake Manifold Gasket - E65, E66

T#:581936

Part#: 714131700

In Stock at Vendor

$ 33.99 USD

Add to Wish List

Qty

$ 33.99 USD

Add to Wish List

Seals the intake collectors/runners to the lower intake manifold

S54 Constant Pressure Valve Replacement Kit

T#:401625

Part#: 11111318185KT

In Stock

Sale - Save 2% $ 85.93

This product was last offered at the strikethrough price on
05-03-2026

$ 84.32 USD

Add to Wish List

Qty

Sale - Save 2%

$ 85.93

This product was last offered at the strikethrough price on
05-03-2026

$ 84.32 USD

Add to Wish List

When your CPV O-ring fails it causes a slow oil leak on the passenger side of the engine, making an oily mess that frequently resembles a rear main seal leak. Replacing the CPV with an upgraded o-ring ensures a long-term solution to this common problem.

The factory o-ring over time fails from heat cycling and oil exposure due to the Buna rubber used in OEM o-rings, while the included Viton Fluoroelastomer is resistant to a much higher temperature to ensure prolonged life without leaking.

Show More Show Less

Valve Cover Gasket - E24 E34

We Price Match - Give Us A Call or Chat!

T#:554723

Part#: 11121730231

In Stock at Vendor

$ 28.99 USD

Add to Wish List

Qty

$ 28.99 USD

Add to Wish List

High-quality replacement valve cover gaskets, including large cover gasket and spark plug cavity gaskets. Fits E24 E24 chassis used up to model year 1987. This is an OE quality gasket rather than an genuine BMW gasket - we have found the OE gaskets are a better seal than the others.

Show More Show Less

Oil Pan Gasket Replacement Kit

T#:5403285

Part#: 11137548031TMSKT

In Stock

$ 201.03 USD

Add to Wish List

Qty

$ 201.03 USD

Add to Wish List

Includes new pan gasket, hardware and a oil service kit. A common piece to begin leaking on any engine, oil pan gaskets begin to leak after a few years.

Febi Rear Crankshaft Seal - E30, E32, E34, E36, E39, E46, E53, E60, E...

We Price Match - Give Us A Call or Chat!

T#:382327

Part#: 11142249533

Ships on Nov 11, 2026

$ 44.99 USD

Add to Wish List

Qty

$ 44.99 USD

Add to Wish List

Replace when doing a clutch job.

Oil Pan Gasket for N52 N55 3.0L

T#:641949

Part#: 11137600482

Ships in 7 Business Days

$ 43.99 USD

Add to Wish List

Qty

$ 43.99 USD

Add to Wish List

Ensure a leak-free BMW N52 or N55 3.0L engine with the Oil Pan Gasket. If you've noticed oil stains on your driveway, it could be a sign of a failing gasket. Replace it promptly to prevent further leaks and maintain the optimal performance of your BMW.

Leak Prevention: The Oil Pan Gasket effectively seals the oil pan, preventing oil leaks.
Common Leak Source: Addresses a common source of oil leaks in N52 and N55 3.0L engines.
Optimal Engine Performance: Ensures the engine operates without oil seepage, maintaining efficiency.
Easy Replacement: Ideal for DIY oil pan projects, making replacement hassle-free.

Upgrade your BMW's engine reliability with the N52/N55 3.0L Oil Pan Gasket, designed to keep your driveway oil-free.

Show More Show Less

Intake Manifold Gasket - E34 E39 E32 E38 E31 X5 with M60 M62 V8 engin...

T#:2854

Part#: 11611433328

In Stock at Vendor

$ 20.63 USD

Add to Wish List

Qty

$ 20.63 USD

Add to Wish List

This intake manifold gasket fits BMW E34 530i 540i - E39 540i - E32 740i 740il - E38 740i 740il - E31 840i 840ci - E53 X5 4.4i 4.6is thru 2003. The V8 often develop a leaking valley pan gasket that requires replacing these intake manifold gaskets. These are sold individually. There are a total of 4 on the car.
If you drive a European vehicle, chances are high your vehicle came equipped with one or more Victor Reinz gaskets. Choose OE quality VR gaskets and seals and do the job right the first time.

This item fits the following BMWs:
1993-1995 E34 BMW 530i 540i
1997-2003 E39 BMW 540i
1993-1994 E32 BMW 740i 740il
1995-2001 E38 BMW 740i 740il
1993-1999 E31 BMW 840i 840ci
2000-2003 E53 BMW X5 4.4i X5 4.6is

Show More Show Less

Bottom-End Gasket Set - E36 323/328/M3, E39 528i 97-98, Z3 2.8 97-98,...

T#:1306

Part#: 11111740981

Ships in 4 Business Days

$ 119.99 USD

Add to Wish List

Qty

$ 119.99 USD

Add to Wish List

This is a complete lower end / bottom-end gasket set for the M52 2.8 liter and S52 3.2 liter engine. With the motor out of the car, any overhaul work must include new gaskets and seals and this kit saves both time and money.

This set of gaskets is a both a time and money saver. It includes all of the commonly replaced gaskets, seals, and o-rings when performing this overhaul. Having these on hand instead of chasing them down at the last minute will save you time, money, and frustration. With this area of the engine apart you're going to want or need to replace these items anyway to ensure it's free of fluid and vacuum leaks. This is especially important because some states have very strict emissions regulations and vacuum and oil leaks can lead to failed inspections tests. On newer cars this can also create issues in the on-board diagnostics system. Even if you're not pulling the head this set includes so many valuable parts you'll want to keep this on hand to use for spares.

Complete Parts List

(click to expand)

BMW p/n	Qty	Description
07119963151	1	oil pan drain plug seal washer
07119963200	1	block coolant drain seal washer
07119963300	2	block coolant drain seal washer (Euro model only)
11131437237	1	oil pan gasket
11141432240	1	rear main seal cover gasket
11141740842	1	front timing cover gasket
11141740845	1	front timing cover gasket
11142249532	1	front crankshaft seal
11142249533	1	rear main seal
11411703947	1	oil pump pipe gasket
11411722837	1	oil pump valve o-ring
11421719855	1	oil filter housing gasket
11431717666	1	upper dipstick tube o-ring
11431740045	1	lower dipstick tube o-ring
11511711484	1	water pump o-ring
11531703848	2	coolant pipe o-ring
12141748398	1	crankshaft sensor o-ring
12611744292	1	oil level sender o-ring (528i only)
32411093596	2	VAN0S oil line seal ring

This item fits the following BMWs:
1996-1999 E36 BMW 323is 323ic 328i 328is 328ic M3
1997-1998 E39 BMW 528i
1997-1998 Z3 BMW Z3 2.8
1998-2000 Z3 BMW M Roadster M Coupe

Show More Show Less

Valve Cover Gasket Set

T#:15744013

Part#: 11127831271-KT

In Stock

Sale - Save 5% $ 108.87

This product was last offered at the strikethrough price on
07-28-2026

$ 103.01 USD

Add to Wish List

Qty

Sale - Save 5%

$ 108.87

This product was last offered at the strikethrough price on
07-28-2026

$ 103.01 USD

Add to Wish List

When these gaskets leak you'll start to smell oil burning when the engine is hot. Also everything downward from the top of the engine becomes coated in a greasy film. The valve cover gasket keeps all of the motor oil inside your engine. Your valve train and lifters get soaked with oil to keep everything lubricated. If the valve cover fails, engine oil seeps and leaks out, running down and burning on the block or cylinder head. Replace it and keep your engine compartment clean and tidy with all the engine oil in the motor. If you are removing your S54 valve cover for valve adjustment, inspection or repairs, you can now get all the gaskets you need in one box. Included are Valve cover gasket Spark plug seals Nut seals Grommets Copper sealing washers

Show More Show Less

Valve Cover Gasket - Left - Cyl 1-4

T#:18269303

Part#: 11127838271

Ships in 8 Business Days

$ 77.54

This product was last offered at the strikethrough price on
05-30-2026

$ 77.51 USD

Add to Wish List

Qty

$ 77.51 USD

Add to Wish List

Valve cover gaskets seal the valve train covers to the top of the engine cylinder heads. These gaskets are a common source of engine oil leaks.

Febi Valley Pan Cover With Seal N62 Engine - E53, E60, E63, E64, E65,...

We Price Match - Give Us A Call or Chat!

T#:363970

Part#: 11147507278

In Stock

$ 120.00

This product was last offered at the strikethrough price on
05-13-2026

$ 91.99 USD

Add to Wish List

Qty

$ 91.99 USD

Add to Wish List

Located in between the cylinder heads beneath the intake manifold.

Cylinder Head Gasket

T#:31291049

Part#: 11121726620

Ships in 2 Business Days

$ 83.66 USD

Add to Wish List

Qty

$ 83.66 USD

Add to Wish List

OEM Victor Reinz Head Gasket Set - E34 525i 91-92, E36 325i 92 (M50 n...

T#:4393

Part#: 11121730253

In Stock

$ 190.99 USD

Add to Wish List

Qty

$ 190.99 USD

Add to Wish List

This head gasket set for the non-VAN0S version of the M50 engine will cover everything you would typically replace on a head overhaul. When pulling the head it's important to have all of the gaskets, seals, and o-rings on hand for replacement. This set saves you both time and money and can virtually eliminate problems down the road caused by re-using gaskets and seals.

This set of gaskets is a both a time and money saver. It includes all of the commonly replaced gaskets, seals, and o-rings when performing this overhaul. Having these on hand instead of chasing them down at the last minute will save you time, money, and frustration. With this area of the engine apart you're going to want or need to replace these items anyway to ensure it's free of fluid and vacuum leaks. This is especially important because some states have very strict emissions regulations and vacuum and oil leaks can lead to failed inspections tests. On newer cars this can also create issues in the on-board diagnostics system. Even if you're not pulling the head this set includes so many valuable parts you'll want to keep this on hand to use for spares.

Complete Parts List

(click to expand)

BMW p/n	Qty	Description
07119963130	2	screw plug gasket ring
07119963200	1	block coolant drain seal ring
07119963201	2	exhaust manifold plug seal ring
07119963355	1	timing chain tensioner seal ring
07119963418	1	timing chain tensioner seal ring
11121726617	1	head gasket
11121735721	2	spark plug hole gaskets
11121738963	1	rear coolant flange profile gasket
11121748049	1	main valve cover gasket
11151730724	1	crankcase vent valve o-ring
11349059172	2	valve stem seal 2 sets = 24 valves
11361740840	1	front head cover gasket
11531265084	1	thermostat o-ring
11531740437	1	thermostat housing profile gasket, inner
11531748047	1	thermostat housing profile gasket, outer
11611716174	1	throttle body o-ring profile gasket
11611717259	6	intake manifold runner profile gasket
11611730725	1	connector o-ring
11611735479	1	connector o-ring
11621728983	3	exhaust manifold gasket plate
12141727220	1	camshaft position sensor o-ring
13531720251	1	fuel pressure regulator o-ring, large
13531720252	1	fuel pressure regulator o-ring, small
13641730767	12	fuel injector o-ring
18301716888	2	exhaust flange gasket

This item fits the following BMWs:
1992 E36 BMW 325i 325is
1991-1992 E34 BMW 525i

Show More Show Less

Victor Reinz Valvetronic Camshaft Adjuster Gasket

T#:374459

Part#: 11127552280

Ships in 1-2 days

$ 36.99

This product was last offered at the strikethrough price on
05-07-2026

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

Sits between the adjuster and the cylinder head

Cometic "MLS" Multi Layer Steel Head Gasket - S50 3.0L, S52 3.2L ...

T#:374022

Part#: C4329-070

In Stock at Vendor

$ 245.99 USD

Add to Wish List

Qty

$ 245.99 USD

Add to Wish List

Discover the Cometic MLS Multi-Layer Steel Gasket

Experience excellence with one of the market's premier multi-layer-steel (MLS) gaskets. This gasket is engineered for long-lasting performance, making it a top choice for high-performance and stock replacement applications. With a thickness of .070" and an 87mm cylinder bore, it offers outstanding durability. What sets Cometic MLS gaskets apart is their ability to be installed dry, thanks to the sealant that forms a bond with dry surfaces.

MLS, which stands for Multi-Layer Steel, is comprised of three layers of stainless steel. The outer layers feature an embossed Viton-coated stainless steel that not only provides an exceptional seal but also exhibits excellent rebound characteristics and resistance to corrosion. These MLS head gaskets effectively reduce bore distortion and can withstand extreme cylinder pressures.

Show More Show Less

Victor Reinz Rear Crankshaft Seal - E31, E32, E34, E38, E39, E52, E53...

T#:369671

Part#: 11141710247

Ships in 2 Business Days

$ 42.99

This product was last offered at the strikethrough price on
05-07-2026

$ 41.99 USD

Add to Wish List

Qty

$ 41.99 USD

Add to Wish List

Does not include a sealing flange

Cometic MLS Head Gasket - 85mm Bore - .140in - M50B25/M52B28 ...

T#:26738398

Part#: C4328-140

In Stock at Vendor

$ 277.99 USD

Add to Wish List

Qty

$ 277.99 USD

Add to Wish List

Multi-Layer Steel gaskets are comprised of multiple embossed layers of both proprietary high-temperature coated and uncoated stainless steel, requiring less clamp load, creating less bore distortion, and conforms load distribution across the sealing area. The embossed outer layers of our head gaskets meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The MLS Gasket (Multi-Layer Steel) features an active combustion seal on multiple layers. The stainless steel outer layers utilize FKM (Viton®) rubber coating, a high-temperature and chemical-resistant polymer. A topcoat of PTFE aids in resistance to fret and increased cold sealing.

Show More Show Less

Victor Reinz Oil Filter Housing Gasket - N52 N54 N55

T#:580305

Part#: B32345

Ships in 2 Business Days

$ 22.99

This product was last offered at the strikethrough price on
05-04-2026

$ 21.99 USD

Add to Wish List

Qty

$ 21.99 USD

Add to Wish List

If your oil filter housing is leaking oil, it is probably the gasket. Replace the faulty gasket with this Victor Reinz gasket to ensure your oil filter housing stay well sealed.

Head Gasket (1.80 Mm)

T#:593772

Part#: 11129065648

Ships in 9 Business Days

$ 45.99 USD

Add to Wish List

Qty

$ 45.99 USD

Add to Wish List

BMW Cylinder Head Gasket Asbestos-Free - 1,80mm Fits BMW Engines including: M30

Cometic MLS Head Gasket - 87mm Bore - .080in - BMW S50B30US/S52B32 ...

T#:26738395

Part#: C4329-080

In Stock at Vendor

$ 262.99 USD

Add to Wish List

Qty

$ 262.99 USD

Add to Wish List

Multi-Layer Steel gaskets are comprised of multiple embossed layers of both proprietary high-temperature coated and uncoated stainless steel, requiring less clamp load, creating less bore distortion, and conforms load distribution across the sealing area. The embossed outer layers of our head gaskets meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes. The MLS Gasket (Multi-Layer Steel) features an active combustion seal on multiple layers. The stainless steel outer layers utilize FKM (Viton®) rubber coating, a high-temperature and chemical-resistant polymer. A topcoat of PTFE aids in resistance to fret and increased cold sealing.

Show More Show Less

Valve Cover Gasket Set - E39 M5, E52 Z8

T#:214354

Part#: TMS214354

Ships in 3 Business Days

$ 265.32

This product was last offered at the strikethrough price on
03-02-2026

$ 264.92 USD

Add to Wish List

Qty

$ 264.92 USD

Add to Wish List

Replacement valve cover gaskets, including large cover gaskets and seals and grommets. Fits E39 M5 and E52 Z8 with S62 engine.

Kit includes:
11120001269 - Valve Cover Gasket Cyl 1-4
11120001278 - Valve Cover Gasket Cyl 5-8
11121721879 - Valve Cover Seals x 6
11121437395 - Valve Cover Seal Grommet x 20

This item fits the following BMWs:
2000-2003 E39 BMW M5
2000-2003 E52 BMW Z8 Roadster

Show More Show Less

Comprehensive Valve Cover Gasket Kit - B58 Gen2

T#:30197950

Part#: 11129894803KT2

Ships in 3 Business Days

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

Maintaining proper oil levels in your engine is crucial for peak performance. Undetected leaks can cause your oil to drop to dangerously low levels between oil changes, leading to severe engine damage.

One common culprit for oil leaks is the valve cover. Over time, exposure to extreme temperature fluctuations can wear down the gaskets, causing them to fail. Prevent oil leaks and protect your engine by replacing these vital components.

Comprehensive Kit Includes:

Valve Cover Gasket Set Profile Gasket (HPFP) 2x O-ring (Camshaft Position Sensor) Replace your old gaskets with our high-quality kit to keep your engine running smoothly and efficiently.

Show More Show Less

Valve Cover Gasket Set - E36 E39 Z3 with M52

T#:337951

Part#: 11120034108

In Stock

Starting at $ 70.25 USD

Add to Wish List

Starting at $ 70.25 USD

Add to Wish List

Original BMW replacement valve cover gaskets, including large cover gasket and spark plug cavity gaskets. Fits M52 engine with single VAN0S. This is the OE BMW gasket rather than an OEM or aftermarket brand - we have found the OE gaskets are a better seal than the others.

Alternate BMW part numbers:
11129070532

This item fits the following BMWs:
1996-1999 E36 BMW 323is 323ic 328i 328is 328ic
1996-1999 E36 BMW M3
1997-1998 E39 BMW 528i
1997-1998 Z3 BMW Z3 2.8
1998-2000 Z3 BMW M Roadster M Coupe

Show More Show Less

Valve Cover Gasket Set - Right

T#:591279

Part#: 11127838272

Ships in 8 Business Days

$ 64.58

This product was last offered at the strikethrough price on
05-29-2026

$ 64.31 USD

Add to Wish List

Qty

$ 64.31 USD

Add to Wish List

Valve cover gaskets seal the valve train covers to the top of the engine cylinder heads. These gaskets are a common source of engine oil leaks.

Victor Reinz Lower Timing Case Gasket - E39, E52

T#:362626

Part#: 11140001187

Ships in 8 Business Days

$ 31.78 USD

Add to Wish List

Qty

$ 31.78 USD

Add to Wish List

Should be replaced any time the timing case is removed

Victor Reinz Valve Cover Gasket - Set - E53, E60, E63, E64, E65, E66,...

T#:586083

Part#: 11127513195

In Stock

$ 50.99

This product was last offered at the strikethrough price on
06-25-2026

$ 43.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 50.99

This product was last offered at the strikethrough price on
06-25-2026

$ 43.99 USD

Limited Qty Sale

Add to Wish List

For Cylinders 5-8

Comprehensive Valve Cover Gasket Kit - BMW M62

T#:30164592

Part#: M6211_2253KT

In Stock

$ 138.30

This product was last offered at the strikethrough price on
06-23-2026

$ 137.70 USD

Add to Wish List

Qty

$ 137.70 USD

Add to Wish List

This complete kit provides all the gaskets you need for a thorough valve cover service.

Is your BMW M60 or M62 V8 engine leaking oil? You’re not alone. Oil leaks are a common issue, but we’ve got the perfect solution to keep your engine running clean and efficient.

The valve cover gasket is essential for keeping engine oil where it belongs – inside the engine. It ensures that your valve train and lifters are properly lubricated, preventing wear and tear. When this gasket fails, oil leaks out, creating a mess and potentially causing damage as it burns on hot engine components. Keep your engine compartment spotless and your BMW performing at its best with our valve cover gasket kit.

Show More Show Less

Victor Reinz Valve Cover Gasket - Cylinders 6-10 - E60

T#:591577

Part#: 11127834111

Ships in 1-2 days

$ 47.57

This product was last offered at the strikethrough price on
08-13-2026

$ 41.26 USD

Add to Wish List

Qty

$ 41.26 USD

Add to Wish List

Addresses valve cover leaks

Cylinder Head Gasket - Priced Each

T#:593788

Part#: 11127513945

In Stock

$ 84.99

This product was last offered at the strikethrough price on
06-22-2026

$ 74.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 84.99

This product was last offered at the strikethrough price on
06-22-2026

$ 74.99 USD

Limited Qty Sale

Add to Wish List

BMW Cylinder Head Gasket Asbestos-Free. Replace your damaged head gasket to restore proper sealing of your engine and head, two needed per installation.

OEM Victor Reinz Head Gasket Set - E36 328i/323is, E39 528i, Z3 2.8 (...

T#:1721

Part#: 11121427826

Ships in 2 Business Days

$ 223.99 USD

Add to Wish List

Qty

$ 223.99 USD

Add to Wish List

Top end / cylinder head gasket set for the M52 engine in the E36 328i, E39 528i, and Z3 2.8. This gasket set covers all of the gaskets, seals, and o-rings you find around the cylinder head.

This set of gaskets is a both a time and money saver. It includes all of the commonly replaced gaskets, seals, and o-rings when performing this overhaul. Having these on hand instead of chasing them down at the last minute will save you time, money, and frustration. With this area of the engine apart you're going to want or need to replace these items anyway to ensure it's free of fluid and vacuum leaks. This is especially important because some states have very strict emissions regulations and vacuum and oil leaks can lead to failed inspections tests. On newer cars this can also create issues in the on-board diagnostics system. Even if you're not pulling the head this set includes so many valuable parts you'll want to keep this on hand to use for spares.

Complete Parts List

(click to expand)

BMW p/n	Qty	Description
07119900244	1	screw plug seal ring
07119963130	3	temp sensor seal ring
07119963201	2	exhaust manifold plug seal ring
07119963418	1	timing chain tensioner o-ring
11121703342	1	valve cover gasket
11121726617	1	head gasket
11121738963	1	rear coolant pipe flange gasket
11121748872	2	spark plug hole gasket
11349064457	2	valve stem seal, 2 sets = 24 valves
11361703713	1	VAN0S solenoid o-ring
11361740839	1	gasket
11531265084	1	thermostat o-ring
11531740437	1	thermostat housing profile gasket
11611716174	1	throttle body o-ring profile gasket
11611740069	2	intake manifold runner profile gasket
11621744252	2	exhaust manifold gasket plate
11721435367	2	gasket
11727505259	1	air pump valve gasket
12141748398	1	camshaft position sensor o-ring
13531720251	1	fuel pressure regulator o-ring, large
13531720252	1	fuel pressure regulator o-ring, small
13621743299	1	intake air temp sensor o-ring
13641286708	12	fuel injector o-ring
18301716888	2	exhaust flange gasket
32411093596	4	VAN0S oil line o-ring

This item fits the following BMWs:
1992-1998 E36 BMW 323is 323ic 328i 328is 328ic
1997-1998 E39 BMW 528i
1997-1998 Z3 BMW Z3 2.8

Show More Show Less

S55B30T0 85mm Bore .044in MLX Head Gasket

T#:22064604

Part#: C14133-044

In Stock at Vendor

$ 194.99 USD

Add to Wish List

Qty

$ 194.99 USD

Add to Wish List

Cometic is the industry standard when upgrading the head gasket on your high performance BMW. These MLS (Metal Layered Steel) head gaskets are many enthusiasts’ choice when adding more boost or simply bulletproofing your current setup! Designed for high-performance applications, Cometic Head Gaskets are sure to stand up to the task!

Show More Show Less

Bottom End Gasket Set - E21 320i. 2002

T#:6573

Part#: 11111734114

In Stock at Vendor

$ 67.99

This product was last offered at the strikethrough price on
05-07-2026

$ 65.99 USD

Add to Wish List

Qty

$ 65.99 USD

Add to Wish List

Rebuilding the M10 4 cylinder engine on your E21 320i or 2002? Then you'll need this bottom end gasket set manufactured by Victor Reinz,
If you drive a European vehicle, chances are high your vehicle came equipped with one or more Victor Reinz gaskets. Choose OE quality VR gaskets and seals and do the job right the first time.

This item fits the following BMWs:
BMW 1600, 2002, 2002tii
BMW 3 Series - 320i

-

Show More Show Less

Victor Reinz Cylinder Head Gasket

T#:375317

Part#: 11121722734

Ships in 1-2 days

$ 43.99

This product was last offered at the strikethrough price on
05-07-2026

$ 30.99 USD

Add to Wish List

Qty

$ 30.99 USD

Add to Wish List

Just the head gasket

Victor Reinz Cylinder Head Bolt Set - E53, E60, E63, E64, E65, E66, E...

T#:376637

Part#: 11127583113

Ships in 1-2 days

$ 44.99

This product was last offered at the strikethrough price on
05-07-2026

$ 43.99 USD

Add to Wish List

Qty

$ 43.99 USD

Add to Wish List

Priced per head, 2 required for a complete job

Victor Reinz Valve Cover Gasket - Cylinders 1-5 - E60

T#:591576

Part#: 11127834110

Ships in 1-2 days

$ 49.99

This product was last offered at the strikethrough price on
05-07-2026

$ 48.99 USD

Add to Wish List

Qty

$ 48.99 USD

Add to Wish List

Addresses valve cover leaks

Comprehensive Valve Cover Gasket Kit - N63/S63

T#:30164665

Part#: 11128648131KT2

Ships in 4 Business Days

$ 157.99

This product was last offered at the strikethrough price on
08-11-2026

$ 156.99 USD

Add to Wish List

Qty

$ 156.99 USD

Add to Wish List

Maintaining proper oil levels in your engine is crucial for peak performance. Undetected leaks can cause your oil to drop to dangerously low levels between oil changes, leading to severe engine damage.

One common culprit for oil leaks is the valve cover. Over time, exposure to extreme temperature fluctuations can wear down the gaskets, causing them to fail. Prevent oil leaks and protect your engine by replacing these vital components.

Comprehensive Kit Includes:

Valve Cover Gasket Set - Left & Right High Pressure Fuel Pump Gasket (2) O-Ring Seals (6) Torx Screws (6) Replace your old gaskets with our high-quality kit to keep your engine running smoothly and efficiently.

Show More Show Less