BMW Performance Intake Kits

BMS Elite Intake - F Chassis B58

T#:5108984

Part#: ELITEB58INTAKE

Ships on Oct 28, 2026

$ 429.00 USD

Add to Wish List

Qty

$ 429.00 USD

Add to Wish List

The BMS Elite B58 Performance Intake outflows the OEM intake but retains everything that's good including the cold air ducting and lightweight heat shielding airbox bottom but replaces the top end of the intake with larger higher flow ducting, a heatshield, and a quality BMS inverted cone air filter to match. Available alone or packaged with the B58 Turbo inlet maintaining that same high level of flow all the way to the turbo.

Show More Show Less

AFE Stage-2 PRO Intake Systems - Choose Your Intake Option

T#:9416047

Part#: 54-13032PDK

Ships in 3 Business Days

Starting at $ 619.00 USD

Add to Wish List

Starting at $ 619.00 USD

Add to Wish List

With an aggressive, motorsport-inspired look and impressive power gains, the PRO intake was made for performance enthusiasts like you

Mishimoto Air-to-Water Intercooler Power Pack - Alpine White III - BM...

T#:51039961

Part#: MMB-F80-PPCAW

Ships in 4 Business Days

$ 2,926.00 USD

Add to Wish List

Qty

$ 2,926.00 USD

Add to Wish List

Reinforces the S55's cooling structure, ensuring adequate airflow and maximizing heat transfer efficiency.

AEM Short Ram Intake System - E46 323Ci, 323i

T#:597096

Part#: AEM-22-670R

EO#: D-670

Ships in 5 Business Days

$ 429.99 USD

Add to Wish List

Qty

$ 429.99 USD

Add to Wish List

A short ram intake system is one of the simplest ways to increase overall performance and sound.

Mishimoto Open Airbox Performance Intake - BMW G8X M3/M4

T#:51039999

Part#: MMAI-G80-21H

Ships in 4 Business Days

$ 815.99 USD

Add to Wish List

Qty

$ 815.99 USD

Add to Wish List

Designed for maximum durability and ease of installation in the G8X engine bay.

Intake - S63tu M5/M6 - Blue Filters

T#:38857243

Part#: BMS-INTAKE-F10B

Ships on Oct 28, 2026

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

BMS Performance Intake for BMW M5/M6 Unlock the full potential of your BMW M5/M6 with the BMS Performance Intake, engineered for maximum airflow and an aggressive turbo sound. Featuring dual high-flow inverted cone filters, this system enhances performance while retaining key OEM features like cold air ducting and lightweight heat shielding. The restrictive top-end is replaced with high-flow pipes and performance filters for optimal efficiency. Key Features & Benefits: ✅ Maximum Airflow – Dual BMS inverted cone filters improve intake efficiency ✅ Up to 10whp Gains – Noticeable power increases, especially at 25psi+ boost ✅ Faster Turbo Spool – Enhances throttle response for a more exhilarating drive ✅ OEM Integration – Maintains factory cold air ducting and heat shielding ✅ No Cutting or Drilling – Easy, fully reversible installation ✅ Complete Kit – Includes all necessary hardware for a hassle-free setup Bonus: Upgraded Charge Pipes This package also includes replacement charge pipes, identical to OEM but with a 1/8" NPT bung & cap for added versatility. 🔥 Enhance your M5/M6 with the ultimate BMS Performance Intake! 🔥

Show More Show Less

AEM Short Ram Intake System - E46 325Ci, 325i, 325xi, 328Ci, 328i, 32...

T#:597095

Part#: AEM-22-672P

EO#: D-670

Ships in 5 Business Days

$ 429.99 USD

Add to Wish List

Qty

$ 429.99 USD

Add to Wish List

A short ram intake system is one of the simplest ways to increase overall performance and sound.

M7 High Flow Pre-Intercooler Charge Pipe - Red

T#:28869562

Part#: 60-3M7102

Ships in 2 Business Days

Sale - Save 5% $ 146.99

This product was last offered at the strikethrough price on
08-31-2026

$ 139.05 USD

Add to Wish List

Qty

Sale - Save 5%

$ 146.99

This product was last offered at the strikethrough price on
08-31-2026

$ 139.05 USD

Add to Wish List

The M7 Pre-Intercooler Charge Pipe is a silicone hose that runs from the turbocharger's outlet to the intercooler's inlet, replacing the stock piping between these two components. The OEM parts were designed from the factory to silence any sound by breaking up the air path with restrictive piping and baffles. With the M7 Pre-Intercooler Charge Pipe, the charged air coming from the turbocharger sees nothing but the smooth inner walls of the tubing and smooth mandrel bends allowing uninterrupted airflow to the intercooler. The pure sweet sound of the turbo is now able to be heard so you and everyone around knows when you put your foot into it! On the dyno, installation of the M7 Pre-Intercooler Charge Pipe resulted in gains of 3.6 horsepower and 11.3 ft-lb of torque AT THE WHEELS! Increase your MINI's performance, awaken the pure turbo sound while sprucing up the engine bay. Available in BLACK | RED | BLUE Note: The R60 version of the charge pipe is supplied as a multi-piece unit. It is very similir to the images shown but has a joint and connector at the center of the hose to accommodate the R60 intercooler location. PROUDLY MADE IN THE USA

Show More Show Less

BMS Elite Dual Intakes - Dry Performance Filters - 2025+ G90 G99 BMW ...

T#:46924993

Part#: G90ELINT-D

Ships on Oct 28, 2026

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

Replace your restrictive factory intake with this Burger Motorsport Elite Dual Intake system for increased airflow to the turbos. Includes all required hardware. No cutting, drilling, or permanent modifications required. The BMS Elite Intake provides up to 10whp gains at 25psi+ boost levels. Sound and turbo spool-up speed are also improved.

Show More Show Less

034Motorsport X34 Carbon Fiber Cold Air Intake System - F2X/F3X ...

2X Entries Into Our F80 M3 Sweepstakes

T#:25341450

Part#: 034-108-1050

Ships in 3 Business Days

$ 795.00 USD

Add to Wish List

Qty

$ 795.00 USD

Add to Wish List

The 034Motorsport X34 Carbon Fiber Cold Air Intake System enhances BMW F2X/F3X B58 performance, boosting horsepower and torque while delivering sporty induction and turbocharger sounds. Its sleek carbon fiber airbox design integrates a partially-enclosed airbox with a 3.5" inlet conical air filter mounted to a CNC-Machined Velocity stack, ensuring smooth airflow to the turbo inlet. Prioritizing airflow optimization around the air filter for maximum performance, the system features a CFD-optimized 4-Ply silicone intake tube, high-flow conical air filter with double-layer pleated cotton filtration medium, and air filter support to prevent unwanted movement. It offers increased airflow compared to stock intake, high-quality carbon fiber construction, enhanced throttle response and engine sounds, and simple installation with factory mounting points. Disclaimer: Intended for racing and off-highway use only; not legal for street vehicles.

Show More Show Less

BMS Elite Dual Intakes - Blue Oiled Filters - 2025+ BMW G90 G99 M5 ...

T#:46924991

Part#: G90ELINT-B

Ships on Oct 28, 2026

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

Replace your restrictive factory intake with this Burger Motorsport Elite Dual Intake system for increased airflow to the turbos. Includes all required hardware. No cutting, drilling, or permanent modifications required. The BMS Elite Intake provides up to 10whp gains at 25psi+ boost levels. Sound and turbo spool-up speed are also improved.

Show More Show Less

Eventuri Carbon Fiber Intake - G20 B48

For Vehicles Produced PRE November 2018

T#:5663666

Part#: EVE-G20B48-V1-IN

Ships in 6 Business Days

$ 1,495.00 USD

Add to Wish List

Qty

$ 1,495.00 USD

Add to Wish List

The BMW G20 B48 Eventuri intake has been developed to provide the turbo with a less restrictive flow path whilst maintaining low inlet temperatures. Heat and Volume are the main considerations when designing an intake for turbocharged engines. In the G20, the intake system is located next to the exhaust manifold which rapidly heat soaks the engine bay. High temperatures are detrimental for engine performance as the turbo would have to build boost with heated, less dense air and so the only way to ensure IAT’s are kept to a minimum is for a fully sealed intake. This however, results in a restriction with only one stock air feed to draw air in from. During development we noticed an additional opening into the wheel arch area and took advantage of this by adding a secondary feed to our airbox. Furthermore our sealed airbox also has a heat shield with gold reflective to minimise the radiative heat transfer from the exhaust manifold. In order to maximise volume we made the airbox as large as possible with a recess for potential strut braces. The stock convoluted intake tube is replaced with a smooth carbon tube which is also larger in internal volume with a starting internal diameter of 111mm (4.4') smoothly tapering down to match the turbo inlet. The tube provides a smooth path from the filter to the turbo inlet. Finally we use a custom made high-flow dry filter which is ISO tested for filtration performance and has a larger filtration area than the stock filter.

Show More Show Less

afe Momentum GT Pro DRY S Cold Air Intake System w/ Carbon Fiber Trim...

T#:557802

Part#: 51-76311

In Stock at Vendor

$ 500.00 USD

Add to Wish List

Qty

$ 500.00 USD

Add to Wish List

This F87 BMW M2 N55 intake kit is an excellent option for anyone to improve their engine intake air flow significantly over the stock air box.

+15 HP / +13 lbs. x ft. Torque max gains
Outflows factory intake
High Quality One-Piece Sealed Housing with Auxiliary Air Inlet
CAD-Designed Roto-Molded Intake Tube
Lightweight high gloss, clear-coated 2 x 2 twill-weave carbon fiber trim on housing for styling
Pro DRY S oil-free 3-Layer Synthetic Media for Maximum
Unique Filter-to-Housing Interface for Easy Installation (US PAT 9440175)
No Cutting or Drilling on Factory Parts for Faster Installation

Unique One-Piece High Quality Housing w/ Auxiliary Inlet:
The smooth one-piece high quality sealed housing with auxiliary air inlet is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style. Unique Filter-to-Housing Interface.(US PAT 9440175)

Carbon Fiber Trim On Housing:
This Momentum GT intake system offers carbon fiber trim on housing to give that motorsport appearance. This cover overlay is constructed of lightweight high gloss, clear-coated 2 x 2 twill-weave carbon fiber.

High Quality Tube:
This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit.

Large 3-Layer Performance Air Filter:
The Momentum GT intake is designed around an oil-free, large 7-1/2" tall inverted top 360 degree radial flow performance air filter with 3-layers of progressive finer porosity synthetic media providing maximum convenience. The unique air filter to housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process.

Premium Hardware:
Premium stainless steel clamp is used for strength while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.

Note:
This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.

This part fits the following BMWs:
F87 M2

Show More Show Less

BlackBoost Cold Air Intake System - BMW G15 850i N63

T#:37217378

Part#: BBCAIS007.1

Ships in 7 Business Days

$ 1,199.00 USD

Add to Wish List

Qty

$ 1,199.00 USD

Add to Wish List

Unleash the full potential of your BMW G15 850i N63 with the BlackBoost Cold Air Intake System—an upgrade designed to deliver superior performance, style, and driving dynamics.

Eventuri Carbon Intake System - B48 G29 Z4

T#:5844257

Part#: EVE-G29Z4-B48-IN

Ships in 6 Business Days

$ 1,495.00 USD

Add to Wish List

Qty

$ 1,495.00 USD

Add to Wish List

The Z4 B48 Eventuri intake has been developed to provide the turbo with a less restrictive flow path whilst maintaining low inlet temperatures. Heat and Volume are the main considerations when designing an intake for turbocharged engines. In the Z4, the intake system is located next to the exhaust manifold which rapidly heat soaks the engine bay. High temperatures are detrimental for engine performance as the turbo would have to build boost with heated, less dense air and so the only way to ensure IAT’s are kept to a minimum is for a fully sealed intake. This however, results in a restriction with only one stock air feed to draw air in from. During development we noticed an additional opening into the wheel arch area and took advantage of this by adding a secondary feed to our airbox. Furthermore our sealed airbox also has a heat shield with gold reflective to minimize the radiative heat transfer from the exhaust manifold. In order to maximize volume we made the airbox as large as possible with a recess for potential strut braces. The stock convoluted intake tube is replaced with a smooth carbon tube which is also larger in internal volume with a starting internal diameter of 111mm (4.4') smoothly tapering down to match the turbo inlet. The tube provides a smooth path from the filter to the turbo inlet. Finally we use a custom made high-flow dry filter which is ISO tested for filtration performance and has a larger filtration area than the stock filter. Features: Carbon Fiber Airbox with Dual Feeds Bespoke High Flow Dry Cone Filter Carbon Fiber Inlet Tube with 111mm opening ID CNC Machined Temperature Sensor Mount CNC Machined Breather adapter Heat Shield with Gold Reflective Backing Laser Cut Stainless Steel Brackets Silicon Coupler with OEM Specification Clamps

Show More Show Less

AFE Track Series Carbon Fiber Cold Air Intake System W/ Pro 5R Filter...

T#:5677368

Part#: 57-10017R

Ships in 4 Business Days

$ 750.00 USD

Add to Wish List

Qty

$ 750.00 USD

Add to Wish List

Features: Dyno-Proven Gains up to +26 HP & +27 Lbs. x Ft. TQ Outflows Factory Intake by 53% Measured Flow: 505 CFM @ 7” H20 Lightweight, 100% Carbon Fiber Intake Tube Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound Washable and Reusable Pro 5R Air Filter for Maximum Performance Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation Utilizes Factory Mounting Locations for an Easy and Secure Installation Fits With Factory and aFe CONTROL Strut Bar Large Three Layer Performance Air Filter: This 7” tall 360-degree radial flow air filter features a 4” oval flange and our oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum airflow and performance. This media is best suited for street and track use. Unique One-Piece Housing: The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive air intake sound. Dyno-Tuned Intake Tube: The lightweight tube is computer-designed to achieve maximum power gains while maintaining a perfect fit. Manufactured from 100% twill weave carbon fiber, it features zero fiberglass and is clear-coated for the highest quality construction. Hassle-Free Installation: This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system. Premium Components: Stainless-steel clamps are included for strength, and a premium bellows coupling allows for ample flexibility. Fitment Note: This intake is designed to fit models equipped with the factory strut brace, with no modification required. Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.

Show More Show Less

Momentum GT Cold Air Intake System W/ Pro DRY S Filter

T#:35121182

Part#: 50-70105D

Back Ordered

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

**Large Three-Layer Performance Air Filter:** This 6-1/2" tall, 360-degree radial flow air filter with a 5-1/2" round flange incorporates our oil-free Pro DRY S media, featuring three synthetic layers for maximum convenience. Its progressive layering ensures excellent filtration efficiency and dust-holding capacity without the need for oils, making it ideal for street and light off-road use. **Advanced One-Piece Housing:** Made from heat-resistant XLPE (cross-linked polyethylene) polymer, the smooth, one-piece sealed housing features our patent-pending filter-to-housing interface. A large clear sight window allows easy filter inspection without system disassembly. **Dyno-Tuned Intake Tube:** This high-quality, computer-designed, dyno-tuned intake tube is engineered to maximize power gains while maintaining a precise fit. Constructed from heat-resistant XLPE material, it offers exceptional durability and resists heat soak. **Simple Installation:** Using factory mounting points, this intake system reduces the need for extra hardware, ensuring an exact fit with each install. Its innovative design, featuring our patent-pending filter-to-housing interface, requires half the parts of traditional cold air intake systems. **Premium Components:** Equipped with stainless-steel worm clamps for added strength and a high-quality silicone coupling to provide flexibility and durability.

Show More Show Less

CTS Turbo High-Flow Air Filters - S58 X3M/X4M

T#:5788211

Part#: CTS-AF-490

Ships in 8 Business Days

Sale - Save 15% $ 199.99

This product was last offered at the strikethrough price on
09-29-2026

$ 169.99 USD

Add to Wish List

Qty

Sale - Save 15%

$ 199.99

This product was last offered at the strikethrough price on
09-29-2026

$ 169.99 USD

Add to Wish List

CTS Turbo's High-Flow drop in air filters are made to maximize air flow. With increased air flow you will hear and notice faster spool while driving and more peak power up top. Designed for a completely OE fitment.

Show More Show Less

Autotecknic Dry Carbon Fiber Intake Air Duct - F90 M5

T#:5189182

Part#: ATK-BM-0022

Ships in 8 Business Days

$ 350.00 USD

Add to Wish List

Qty

$ 350.00 USD

Add to Wish List

AutoTecknic was established in 2000 and has since become one of the largest manufacturers and distributors of carbon fiber parts and accessories for a wide variety of manufacturers. AutoTecknic Dry Carbon Intake Air Ducts are designed to mount behind the front grills of your F90 M5 to provide a "ram-air" effect . The ducts achieve this by utilizing the air intake motion to increase static air pressure entering the intake manifold. This creates greater airflow throughout the engine by forcing in increased cooler air, resulting in lower engine temperature and cooler air going into the intake. Dry carbon fiber's name also comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold, and then into a sealed vacuum (autoclave) to properly cure. This particular method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means that there are fewer pinholes and virtually no air pockets that form in the carbon. Dry carbon is the highest quality version of carbon fiber products that are produced.

Show More Show Less

BMS Elite Intake - Red Filters - F90 M5 F9X M8

T#:12413842

Part#: F9XS63RED

In Stock

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

Red Filter Variant. Includes all required hardware. It does NOT require any cutting or drilling. While the factory intake is very high flowing the BMS Elite intake provides power gains of up to 10whp range at 25psi+ boost levels. Sound and turbo spool-up speed are also improved. Made in the USA.

Show More Show Less

AFe Power Takeda Momentum Cold Air Intake System - Pro 5R Filter - To...

For 2021+ model years only

T#:3283359

Part#: 56-70037R

In Stock at Vendor

$ 420.00 USD

Add to Wish List

Qty

$ 420.00 USD

Add to Wish List

DETAILS: Dyno-Proven Gains up to +13 HP & +16 Lbs. x Ft. TQ Outflows Factory Intake by 30% Measured Flow: 345 CFM @ 7” H20 Washable and Reusable Pro 5R Air Filter for Maximum Performance Clear Sight Window for Convenient Filter Inspection Without Disassembly Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation Utilizes Factory Mounting Locations for an Easy and Secure Installation Large Five Layer Performance Air Filter: This 7-1/2” tall 360-degree radial flow air filter features a 4” round flange and our oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum airflow and performance. This media is best for street and track use. Unique One-Piece Housing: The smooth one-piece sealed housing, constructed of heat-resistant XLPE (cross-linked polyethylene) polymer, features our patent-pending filter-to-housing interface. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. Toyota Strut Brace: The Takeda intake is designed to fit with the factory strut brace, with no modifications necessary. Dyno-Tuned Intake Tube: This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat-soak resistant and extremely durable. Hassle-Free Installation: This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system. Premium Components: Stainless-steel worm clamps are included for strength, and a premium bellows coupling allows for ample flexibility. Momentum intakes are designed with fewer parts for a fast and easy installation. Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.

Show More Show Less

Autotecknic Dry Carbon Intake Air Duct Set - BMW G87 M2

T#:43817983

Part#: ATK-BM-0711

Ships in 8 Business Days

$ 645.00 USD

Add to Wish List

Qty

$ 645.00 USD

Add to Wish List

Feed fresh air directly into your intake to help keep intake air temps low for better engine power and performance.

Eventuri BMW G20 M340I Carbon Intake

For Vehicles Produced PRE November 2018

T#:2929024

Part#: G20B58-V1-INT

Ships in 6 Business Days

$ 1,495.00 USD

Add to Wish List

Qty

$ 1,495.00 USD

Add to Wish List

The BMW G20 B58 Eventuri intake has been developed to provide the turbo with a less restrictive flow path whilst maintaining low inlet temperatures. Heat and Volume are the main considerations when designing an intake for turbocharged engines. In the G20, the intake system is located next to the exhaust manifold which rapidly heat soaks the engine bay. High temperatures are detrimental for engine performance as the turbo would have to build boost with heated, less dense air and so the only way to ensure IAT’s are kept to a minimum is for a fully sealed intake. This however, results in a restriction with only one stock air feed to draw air in from. During development, the folks at Eventuri noticed an additional opening into the wheel arch area and took advantage of this by adding a secondary feed to our airbox. Furthermore, the sealed airbox also has a heat shield with gold reflective to minimise the radiative heat transfer from the exhaust manifold. In order to maximize volume, they made the airbox as large as possible with a recess for potential strut braces. The stock convoluted intake tube is replaced with a smooth carbon tube which is also larger in internal volume with a starting internal diameter of 111mm (4.4') smoothly tapering down to match the turbo inlet. The tube provides a smooth path from the filter to the turbo inlet. Finally, they use a custom-made high-flow dry filter that is ISO tested for filtration performance and has a larger filtration area than the stock filter.

Show More Show Less

AWE S-FLO Carbon Intake System - Toyota A90/A91 GR Supra B58 3.0L ...

2X Entries Into Our F80 M3 Sweepstakes

T#:47233630

Part#: 2660-1501X

Ships on Oct 30, 2026

Starting at $ 865.00 USD

Add to Wish List

Starting at $ 865.00 USD

Add to Wish List

The S-FLO Carbon Intake is a full, modular replacement for the factory airbox. Featuring a 4.5” diameter inlet tube, and a massive oil-less inverted cone filter that provides 71% increase in filter surface area over stock... you’re looking at an ample dose of upgraded induction worthy of dyno-proven 15 hp and 21 ft-lbs of torque at the wheels (stage 1 software).

Show More Show Less

AFe Power Takeda Momentum Cold Air Intake System - Pro DRY S Filter -...

For 2021+ model years only

T#:3283358

Part#: 56-70050D

In Stock at Vendor

$ 451.00 USD

Add to Wish List

Qty

$ 451.00 USD

Add to Wish List

DETAILS: Dyno-Proven Gains up to +6 HP & +12 Lbs. x Ft. TQ Outflows Factory Intake by 9% Measured Flow: 350 CFM @ 7” H20 Washable and Reusable Pro DRY S Air Filter for Maximum Convenience Clear Sight Window for Convenient Filter Inspection Without Disassembly Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation Utilizes Factory Mounting Locations for an Easy and Secure Installation Fits With Factory and aFe CONTROL Strut Bar Large Three Layer Performance Air Filter: This 7-1/2” tall 360-degree radial flow air filter features a 4” round flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. Unique One-Piece Housing: The smooth one-piece sealed housing, constructed of heat-resistant XLPE (cross-linked polyethylene) polymer, features our patent-pending filter-to-housing interface. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. Toyota Strut Brace: The Takeda intake is designed to fit with the factory and aFe CONTROL strut brace, with no modifications necessary. Dyno-Tuned Intake Tube: This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat-soak resistant and extremely durable. Hassle-Free Installation: This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system. Premium Components: Premium stainless steel clamps and flexible silicone couplings are used for strength and durability while also providing the most secure installation available. Emissions Disclaimer: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.

Show More Show Less

Gen 3 Cold Air Intake (Up Until -2018/2019) - Blue

T#:50136728

Part#: 70-312101-BL

Ships in 4 Business Days

Sale - Save 5% $ 217.99

This product was last offered at the strikethrough price on
08-31-2026

$ 207.08 USD

Add to Wish List

Qty

Sale - Save 5%

$ 217.99

This product was last offered at the strikethrough price on
08-31-2026

$ 207.08 USD

Add to Wish List

BMS Elite Performance Intake - Flat Black W/ Blue Filters

T#:39633149

Part#: G8XELTINFBBF

Ships on Oct 28, 2026

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

MINI R55 To R60 NM Hi-Flow Induction Kit - Black - Dry Filter ...

T#:48608203

Part#: NM.658858BD

Ships in 3 Business Days

$ 499.00

This product was last offered at the strikethrough price on
09-22-2026

$ 474.99 USD

Add to Wish List

Qty

$ 474.99 USD

Add to Wish List

NM Hi-Flow Induction Kit - Blue - Dry Filter

T#:48608210

Part#: NM.658856D

Ships in 3 Business Days

$ 459.00

This product was last offered at the strikethrough price on
09-22-2026

$ 436.99 USD

Add to Wish List

Qty

$ 436.99 USD

Add to Wish List

Vargas Carbon Fiber Airbox Lid & Filter Kit - BMW G29 Z4, Toyota A90/...

2X Entries Into Our F80 M3 Sweepstakes

T#:51778121

Part#: VTT-SUPRA-CF-LID

Ships on Oct 27, 2026

$ 444.99 USD

Add to Wish List

Qty

$ 444.99 USD

Add to Wish List

Elevate the performance and visual appeal of your B58-powered Supra or Z4 with the VTT Carbon Fiber Intake Lid and Filter system.

OTA - Oval Trumpet Airbox

T#:30960447

Part#: ACOTASP-20

Ships in 2 Business Days

$ 437.99 USD

Add to Wish List

Qty

$ 437.99 USD

Add to Wish List

MMX - Ultimate Intake Solution (Upgrade Kit) - G8X M2, M3, M4 ...

T#:45517834

Part#: MMR11-1600-FK

Special Order: No Guaranteed ETA

$ 1,295.99 USD

Add to Wish List

Qty

$ 1,295.99 USD

Add to Wish List

The MMX Intake Solution for the BMW G8X M2, M3, and M4 eliminates S58 airflow restrictions by replacing corrugated factory plastics with constant-diameter aluminum piping. Smooth-profile 6062-T6 aluminum turbo inlets (70mm/63mm ID) and 20-micron washable cotton panel filters increase intake velocity, reduce turbo spool time, and resolve bottlenecks on tuned engines. Add the MMX G8X S58 Intake Solution to your cart to optimize turbo efficiency.

Show More Show Less

Mishimoto Air-to-Water Intercooler Power Pack - Lime Rock Gray Metall...

T#:51039969

Part#: MMB-F80-PPCLRG

Ships in 4 Business Days

$ 2,926.00 USD

Add to Wish List

Qty

$ 2,926.00 USD

Add to Wish List

This Power Pack focuses on reinforcing the structural integrity of the S55’s induction system while optimizing fluid dynamics.

NM Air Intake Filter Replacement B46/48 - Pre-Oiled / Blue

T#:27605435

Part#: NEU.340B

Ships in 3 Business Days

$ 45.99 USD

Add to Wish List

Qty

$ 45.99 USD

Add to Wish List

NM Hi-Flow Induction Kit - Black - Dry Filter

T#:48435972

Part#: NM.658856BD

EO#: D-236-15

Ships in 3 Business Days

$ 459.00

This product was last offered at the strikethrough price on
09-22-2026

$ 436.99 USD

Add to Wish List

Qty

$ 436.99 USD

Add to Wish List

Injen SP Short Ram Cold Air Intake - Polished - BMW G20 M340, G22/23 ...

T#:26704975

Part#: SP1140P

Ships in 3 Business Days

$ 429.99 USD

Add to Wish List

Qty

$ 429.99 USD

Add to Wish List

The Injen SP1140 Cold Air Intake is the next logical step in your search for power gains for your 2020-2022 BMW G20 3-Series equipped with the L6-3.0L Turbo B58 and the L6-3.0L Turbo Hybrid engine. This easy-to-install performance cold air intake system allows that hungry Turbo engine to breathe deeper and unleash that additional performance that you’ve been craving. The Injen Technology engineers spent abundant amounts of time designing, testing, and perfecting this performance Cold Air Intake system to develop some serious bolt-on power. The soul of this Cold Air Intake system is with our smooth, mandrel-bent, oversized 4.00” O.D. T6-6061 aluminum tube provides a smooth, uninterrupted path for highly efficient airflow and a look that will impress every time you open your hood! Not only that, but this performance intake system put down an additional 19hp and 18 lb-ft of torque on the chassis dyno! That’s performance that you can feel and hear! KEY FEATURES Dyno Proven Gains of up to 19 hp and 18 lb-ft. of torque Aggressive engine tone under full throttle Provides power gains while maintaining A/F ratios Work with stock tune. No additional tuning required Manufactured from massive 4.00" O.D. 6061-T6 Mandrel-Bent Aluminum Tubing Hand-TIG welded for precious and beautiful welds Smooth intake piping eliminates restrictions and improves airflow Includes custom heat shield specifically designed for this application Aggressive under hood appearance while maintaining an OE fit Fully serviceable Injen SuperNano-Web dry air filter Made in Pomona California, USA headquarters Injen Technology Limited Lifetime Warranty

Show More Show Less

Vargas Modular Intake System - BMW G2X 3

2X Entries Into Our F80 M3 Sweepstakes

T#:51883663

Part#: VTT-G2X-INT4

Ships on Oct 27, 2026

$ 669.99 USD

Add to Wish List

Qty

$ 669.99 USD

Add to Wish List

Engineered specifically for the B58TU platform, the VTT Modular Intake System focuses on streamlining the journey from the atmosphere to your turbocharger.

MMX - Performance Carbon Fiber Intake (Matte) - G8X M2, M3, M4 ...

T#:58745779

Part#: MMR11-1611

Ships in 4 Business Days

$ 2,395.00 USD

Add to Wish List

Qty

$ 2,395.00 USD

Add to Wish List

he MMX Performance Matte Carbon Fiber Intake for BMW G8X M2, M3, and M4 models upgrades restrictive factory S58 air boxes to maximize twin-turbo induction flow. Constructed from hand-laid 3K twill carbon fiber and billet 6061-T6 aluminum hardware, the MMX induction system resolves turbulent airflow paths by increasing filter surface area by 49 percent and overall volume by 23 percent. Add the MMX Performance Matte Carbon Fiber Intake to your cart to upgrade S58 throttle response.

Show More Show Less

NM Hi-Flow Induction Kit - Blue - Dry Filter

T#:48608207

Part#: NM.658858D

Ships in 3 Business Days

$ 499.00

This product was last offered at the strikethrough price on
09-22-2026

$ 474.99 USD

Add to Wish List

Qty

$ 474.99 USD

Add to Wish List

Vargas Modular Intake System - BMW G2X M340i, M440i

2X Entries Into Our F80 M3 Sweepstakes

T#:51883661

Part#: VTT-G2X-INT2

Ships on Oct 27, 2026

$ 284.99 USD

Add to Wish List

Qty

$ 284.99 USD

Add to Wish List

The VTT Modular Intake System is engineered for the BMW owner who wants to maximize performance without sacrificing the factory look of their engine bay.

Injen Evolution Cold Air Intake - BMW G20 M340, G22/23 M440, G42 M240...

T#:26704971

Part#: EVO1108

Ships in 3 Business Days

$ 436.99 USD

Add to Wish List

Qty

$ 436.99 USD

Add to Wish List

You finally have your BMW equipped with the Turbo B58 and Turbo Hybrid B58 engine and now the next logical step in your search for power gains is with Injen Technology. The EVO1108 is specifically designed for a drop-in fit in your BMW, including the seamless fitment into the factory air scoop. This easy-to-install performance cold air intake system allows that hungry Turbo engine to breathe deeper and unleash that additional performance that you’ve been craving. It truly is a win on all levels. The Injen EVO1108 cold air intake system is truly on the next level. From the one-piece sealed housing that utilizes our patent pending Twist-Lock technology to securely attach a massive SuperNano-Web Dry air filter in place, to the seamless fitment to the OE inlet scoop, all the way down to premium hardware, Injen has put it all on the board to provide you, the consumer, the best intake possible for your new BMW! Roto-molded Housing: The one-piece sealed housing utilizes the all-new Injen Twist-Lock System to securely attach the SuperNano-Web Dry air filter in place which eliminates the use of unnecessary parts and provides one of the simplest installations available. The EVO1108 housing also sports the all-new Injen Clear-View badge for a cleaner more aggressive under-hood appearance. Roto-molded Intake Tube: The EVO1108 Evolution Air Intake System uses a custom-designed and dyno-tuned, intake tube to produce huge power gains while retaining an OE quality fit. SuperNano-Web Dry Air Filter: 'That's massive!' is all you will hear about this SuperNano-Web Dry air filter that is included with the EVO1108 cold air intake system. This filter has been uniquely designed to work with the Injen Twist-Lock System. Using our Twist-Lock technology has allowed our engineers to use the largest filter possible for this application, which increases the available air volume, resulting in added power while keeping the installation process quick and simple. Quality Hardware: From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive-grade silicone coupler, every aspect is covered for a perfect and secure fit. Hassle-Free Installation: Make it easy! The Injen Evolution Air intakes that use our Twist-Lock System have been strategically designed to use fewer parts to provide the end user with one of the quickest and simplest installations available on the market today. Dyno Proven: Clean and simple, NUMBERS talk! Injen has put in the time and diligence to stand behind our performance data. We put in the time to test and prove that we have developed a superior kit for your B58 equipped BMW. After hours of designing and dyno testing, Injen is proud to say that the EVO1108 Evolution Air Intake system puts down consistent power numbers of up to 13 additional horsepower and 11 Lb-Ft. of torque. KEY FEATURES Dyno Proven gains of up to 13 hp and 11 lb-ft. of torque Manufactured from high-strength XLPE Roto-Molded Polyethylene Designed to work with the stock calibration Box seamlessly adapts to the OE inlet scoop without modification Dynamic under hood appearance while maintaining an OE fit Intake scoop integration is designed to capture the largest amount of cool air for max performance Aggressive intake growl under acceleration Simple drop-in installation can normally be completed within 20 minutes Reinforced automotive grade silicone couplers Air Filter attaches to the airbox using our patented TwistLock method Fully serviceable 5.00" I.D. Injen SuperNano-Web dry air filter Made in Pomona California, USA Injen Technology Limited Lifetime Warranty

Show More Show Less

Injen SP Short Ram Cold Air Intake - Wrinkle Red - BMW F22/23 F3X M24...

T#:20848123

Part#: SP1129WR

Ships in 3 Business Days

$ 465.99 USD

Add to Wish List

Qty

$ 465.99 USD

Add to Wish List

Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. Injen Technology is the world’s first tuned air intake system and holds four (4) patents on the tuning process of an intake system, something no other manufacturer can claim. The SP series of cold air intakes feature many of Injen Technology’s patented tuning process, including MegaRam (MR) Technology (Patents 7,359,795 and 7,669,571), Air Fusion (Patent 7,721,669), and many other innovations that keep Injen Technology at the forefront in the performance aftermarket. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. Additionally, this SP intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! This intake provides an aggressive and throaty tone that is unmatched in the aftermarket. Want to add that personalized touch to your intake? You’re in luck, as Injen also offers this intake system in multiple finishes. To top it all off, this SP CAI kit includes the unbeatable Injen Technology limited Lifetime Warranty! Dyno Proven Gains of up to 14 hp and 13 lb-ft. of torque Short Ram Air Intake Design Features Injen’s patented MegaRam (MR) Technology Provides power gains while maintaining A/F ratios No additional tuning required 6061-T6 aluminum intake tubing Includes custom heat shield specifically designed for this application Fully serviceable Injen SuperNano-Web dry air filter Available in multiple finishes Aggressive engine tone under full throttle Smooth intake piping eliminates restrictions and improves airflow Made in Pomona California, USA Injen Technology Limited Lifetime Warranty

Show More Show Less

MMX - Performance Carbon Fiber Intake (Gloss) - G8X M2, M3, M4 ...

T#:58709208

Part#: MMR11-1610

Ships in 4 Business Days

$ 2,395.00 USD

Add to Wish List

Qty

$ 2,395.00 USD

Add to Wish List

he MMX Performance Gloss Carbon Fiber Intake for BMW G8X M2, M3, and M4 models upgrades restrictive factory S58 air boxes to maximize twin-turbo induction flow. Constructed from hand-laid 3K twill carbon fiber and billet 6061-T6 aluminum hardware, the MMX induction system resolves turbulent airflow paths by increasing filter surface area by 49 percent and overall volume by 23 percent. Add the MMX Performance Gloss Carbon Fiber Intake to your cart to upgrade S58 throttle response.

Show More Show Less

MINI R50 R52 Base Short Ram Intake System - Black

T#:31291059

Part#: IS1120BLK

EO#: D-476-5

In Stock at Vendor

$ 283.99 USD

Add to Wish List

Qty

$ 283.99 USD

Add to Wish List

MINI R50 R52 Base Short Ram Intake System - Black is a top-tier performance enhancement designed for MINI enthusiasts seeking the best in engine intake systems. This intake system utilizes Injen's patent-pending MR Technology to ensure optimal gains and maintain a safe air/fuel ratio, benefiting from years of industry expertise and real-world testing.

Enhanced Performance: Increases engine efficiency and power with Injen's advanced MR Technology.
Optimal Air/Fuel Ratio: Ensures a safe and effective air/fuel mixture for improved engine performance.
High-Quality Construction: Developed through extensive testing and industry experience.
Complete Installation Kit: Includes all necessary hardware for straightforward installation.

This intake system is designed to deliver superior performance and reliability, making it an excellent choice for MINI enthusiasts.

Show More Show Less

Injen SP Cold Air Intake System - Wrinkle Black - G29 Z4, A90 MKV Sup...

T#:26705012

Part#: SP2300WB

In Stock at Vendor

$ 459.99 USD

Add to Wish List

Qty

$ 459.99 USD

Add to Wish List

The all-new 2020-2023 Toyota GR Supra and the BMW Z4 equipped with the B58 3.0L turbo engine are beasts from the factory, so the engineers at Injen Technology needed to design an intake that packed a serious punch to keep up with this athletic and sophisticated performer. The R&D team took these all-new rockets deep into the lab to extract the hidden power lurking under the hood. From start to finish, each aspect of Injen Technology’s traditional aluminum Cold Air Intake for the 2020-2023 Toyota GR Supra and BMW Z4 was a true labor of love. The Injen SP2300 cold air intake has the cleanest installation on the market that is also available in multiple finishes for that personized look. The OE intake tract on the B58 engine is very restrictive from the factory and limiting power output by choking the turbo. Our new SP2300 short ram cold air intake opens up that intake tract with a large 4.0" aluminum intake tube that allows that turbo and engine to breathe deep and produce the power that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. It provides an intake growl that will surely excite your senses as you open up your Toyota Supra and let that turbo spool. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. Additionally, the SP2300 intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! On our dyno, the SP2300 put down an impressive 15 additional horsepower and 17 pound-feet of tire-scorching torque! KEY FEATURES Dyno Proven gains of up to 15 hp and 17 lb.-ft. of torque Aggressive engine tone under full throttle Provides power gains while maintaining A/F ratios – no additional tuning required Massive 4.00 6061-T6 aluminum intake tubing Smooth intake piping eliminates restrictions and improves airflow Includes custom heat shield specifically designed for this application Aggressive under-hood appearance while maintaining an OE fit Fully serviceable Injen SuperNano-Web dry air filter Available in Polished, Wrinkle Black, and Wrinkle Red Made in Pomona California, USA Injen Technology Limited Lifetime Warranty

Show More Show Less

Cold Air Intake System - F8X S55

T#:53396925

Part#: BBCAIS043

Ships in 7 Business Days

$ 1,599.00 USD

Add to Wish List

Qty

$ 1,599.00 USD

Add to Wish List

Injen SP Cold Air Intake System - Polished - G29 Z4, A90 MKV Supra B5...

T#:26705011

Part#: SP2300P

In Stock at Vendor

$ 459.99 USD

Add to Wish List

Qty

$ 459.99 USD

Add to Wish List

The all-new 2020-2023 Toyota GR Supra and the BMW Z4 equipped with the B58 3.0L turbo engine are beasts from the factory, so the engineers at Injen Technology needed to design an intake that packed a serious punch to keep up with this athletic and sophisticated performer. The R&D team took these all-new rockets deep into the lab to extract the hidden power lurking under the hood. From start to finish, each aspect of Injen Technology’s traditional aluminum Cold Air Intake for the 2020-2023 Toyota GR Supra and BMW Z4 was a true labor of love. The Injen SP2300 cold air intake has the cleanest installation on the market that is also available in multiple finishes for that personized look. The OE intake tract on the B58 engine is very restrictive from the factory and limiting power output by choking the turbo. Our new SP2300 short ram cold air intake opens up that intake tract with a large 4.0" aluminum intake tube that allows that turbo and engine to breathe deep and produce the power that you’ve been craving. The SP series of cold air intakes is Injen’s flagship system in their lines of traditional aluminum cold air intake systems. It provides an intake growl that will surely excite your senses as you open up your Toyota Supra and let that turbo spool. The soul of this intake is found within 6061-T6 aluminum air intake tube that provides a smooth uninterrupted path for highly efficient airflow. Our engineers have painstakingly designed the intake to provide the highest levels of safe power, along with clean aesthetics that will impress every time you open your hood. In addition to the impressive power increase, the Injen team has ensured that a safe Air fuel (A/F) ratio has been maintained throughout the power band. Additionally, the SP2300 intake includes a fully serviceable Injen SuperNano-Web dry air filter, which provides increased filter surface area allowing for greater airflow and unbeatable filtration. If that's not enough, the Injen SP performance intake provides power you can hear and feel! On our dyno, the SP2300 put down an impressive 15 additional horsepower and 17 pound-feet of tire-scorching torque! KEY FEATURES Dyno Proven gains of up to 15 hp and 17 lb.-ft. of torque Aggressive engine tone under full throttle Provides power gains while maintaining A/F ratios – no additional tuning required Massive 4.00 6061-T6 aluminum intake tubing Smooth intake piping eliminates restrictions and improves airflow Includes custom heat shield specifically designed for this application Aggressive under-hood appearance while maintaining an OE fit Fully serviceable Injen SuperNano-Web dry air filter Available in Polished, Wrinkle Black, and Wrinkle Red Made in Pomona California, USA Injen Technology Limited Lifetime Warranty

Show More Show Less

Carbon Fiber Induction Kit

T#:51813324

Part#: INDK61

Ships on Nov 2, 2026

$ 719.99 USD

Add to Wish List

Qty

$ 719.99 USD

Add to Wish List

VTT Turbo-Forward Full Flow Intake System – Complete Billet Turbo I...

2X Entries Into Our F80 M3 Sweepstakes

T#:47644924

Part#: VTT-G9X-INTAKE

Ships in 10 Business Days

Starting at $ 1,099.00 USD

Add to Wish List

Starting at $ 1,099.00 USD

Add to Wish List

Vargas Turbo Technologies proudly introduces the first complete intake system for the G90/G99 M5 that removes every factory airflow restriction from turbo to filter. While other intake kits only replace the upper portion of the system and leave the highly restrictive OEM turbo inlet pipes untouched, VTT addresses the real choke point, delivering a full solution, not a half measure. This fully engineered system replaces the entire factory tract with CNC-machined 6061-T6 billet adapters that bolt directly to the turbochargers, transitioning into reinforced 2.5” to 4” high-temperature silicone and finishing with dual VTT 4” dry-flow filters. The result is a true full-flow intake with zero factory bottlenecks, allowing the S68 to finally breathe the way it should.

Show More Show Less

AEM Short Ram Intake System - E46 323Ci 323i

T#:597097

Part#: AEM-22-670P

EO#: D-670

Ships in 5 Business Days

$ 429.99 USD

Add to Wish List

Qty

$ 429.99 USD

Add to Wish List

A short ram intake system is one of the simplest ways to increase overall performance and sound.

Project Cars

SELECT YOUR BMW

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Purpose

Narrow Results