Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
In BMW's with the N55, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with new high flow ducting and a performance filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and turbo spooling!
Installation and removal is extremely quick and easy, taking only 5 minutes in the driveway!
Features:
An easy way to improve the performance of your N54 powered BMW is by removing the stock air box and swapping in this Dual Cone Intake "DCI" from Burger Motorsports. Featuring two S&B inverted cone filters with adapter couplers and new hardware, these easily install into the stock box location, allowing for greatly improved intake air flow. This is great for both stock and modified vehicles, as this allows for greater air flow at all RPMs and removes the air restriction that would normally rob your engine of power.
In addition to increased power, these filters give your engine a more aggressive appearance and sound that any automotive enthusiast will appreciate.
MADE IN THE USA
**CARB Approved Under Executive Order (EO) No. D-744-2 for all 2007-2012 BMW models equipped with the N54 3.0L twin-turbocharged 6-cylinder engine.**
An easy way to improve the performance of your N54 powered BMW is by removing the stock air box and swapping in this Dual Cone Intake "DCI" from Burger Motorsports. Featuring two S&B inverted cone filters with adapter couplers and new hardware, these easily install into the stock box location, allowing for greatly improved intake air flow. This is great for both stock and modified vehicles, as this allows for greater air flow at all RPMs and removes the air restriction that would normally rob your engine of power.
In addition to increased power, these filters give your engine a more aggressive appearance and sound that any automotive enthusiast will appreciate.
MADE IN THE USA
**CARB Approved Under Executive Order (EO) No. D-744-2 for all 2007-2012 BMW models equipped with the N54 3.0L twin-turbocharged 6-cylinder engine.**
In BMW's with the N55, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with new high flow ducting and a performance filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and turbo spooling!
Installation and removal is extremely quick and easy, taking only 5 minutes in the driveway!
Features:
Maximum Flow Pro5R Filter
This intake kit replaces your restrictive factory air box. It features 1.6mm powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
By removing your stock intake air box, you are removing the most restrictive portion of your M3's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
12 hp gain at 4900 rpm!
11 lb/ft torque at 4900rpm!
This aFe intake fits the following BMWs:
E46 3 series: M3 Coupe, M3 Convertible
This unique intake system is designed to use the factory intake box to seal the intake tube and filter and tube against unwanted underhood temperatures while increasing air flow and velocity for optimum performance. This air intake system features either a ProDry S or Pro5R air (choose below), a dyno tuned intake tube and all the hardware necessary for an easy installation. This Stage 2 air intake system produces 12 horsepower, 9lbs. X ft. torque and out-flowed the factory intake by 41%. This system is truly a silent killer.
Choose the optional Carbon Fiber intake tube to reduce weight and enhance the visual appearance of the engine bay. The carbon fiber intake tube features a high gloss clear-coated 2 x 2 Twill Weave Carbon Fiber For Heat Protection, the tube is shaped to maintain factory fit and function.
Choose from Pro5R oiled filter for maximum flow or ProDry S oil-free filter media for maximum convenience.
Pro5R filter uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media.
video: E9x M3 aFe Intake Installation
ProDry S filter uses an oil-free filter media for less maintenance. This oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
This aFe Intake Kit fits the following BMWs:
2008+ E90 BMW M3 Sedan
2008+ E92 BMW M3 Coupe
2008+ E93 BMW M3 Convertible
BMW E60 E61 N52 Cold Air Intake System aFe Magnum FORCE Stage-2 Pro 5R is designed to significantly enhance the performance of your BMW by replacing the restrictive factory air box. This intake system features a 1.6mm powder-coated steel heat shield and a heat-resistant molded intake tube, which is trim-sealed to prevent hot engine air from entering. The kit includes a custom aFe brand Pro 5R cotton filter, known for its high airflow and exceptional filtration.
This intake system is a high-performance upgrade that enhances engine efficiency and driving experience. For installation instructions, please refer to the provided link.
AFE Stage 2 Pro Dry S Intake System improves air flows over the factory components and isolates the intake tube and filter from underhood heat to keep intake air cooler and denser. Improved breathing increases power and torque. Kit includes filter, intake tube, and mounting hardware.
AFE Pro Dry S air filter uses three layer, washable synthetic media filtration for improved engine protection. Dry filters are MAF safe. High quality perimeter seal prevents filter bypass. Emissions legal in all 50 states.
The air filter must clean 8000-9000 gallons of air for each gallon of gasoline burned inside the engine, without restricting the air intake.
Air filter service at recommended intervals lets an engine breathe properly while protecting it from costly damage. Air filters should be inspected and replaced as needed at least once a year, more often if the vehicle is driven in heavily polluted or dusty conditions.
Fits the Following BMWs:
E90 E92 E93 M3
Maximum Flow Pro5R Filter
This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 1.6mm powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
This version uses aFe's highest flowing filter media, which uses a light oil gauze to filter out dirt and particulates while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horsepower and torque, improving acceleration as well as throttle response.
aFe has reported gains as high as 25 hp and 35 lb/ft torque for these kits, depending on the application.
Clickhere for installation instructions.
Clickhere for Customer Review (detailed)
Want an extra layer of defense? Add a pre-filter to prevent water, mud, and sand from congesting your air intake system. This simple upgrade slides over the aFe filter of this intake kit, much like a sock, giving you an extra layer of defense, and extending the cleaning interval of your aFe intake's filter element. Best of all, using the Pre-Filter does not significantly diminish your air filters performance the smooth rush of oxygen keeps rolling right into your engine. To add the pre-filter, just select the option for the drop-down option below.
This part fits the following BMWs:
1998 - 2004 E39 540i
Want more power out of your N55? The Momentum GT Pro DRY S Cold Air Intake is the best system for creating power, airflow, and maximizing performance. This system provides a +16% air-flow increase over stock, allowing the car to breathe to its best ability. The Pro Dry S Filter is made of a 3-layer synthetic media, providing additional air flow and filtration. The Pro DRY S is convenient, as it requires no re-oiling when being cleaned.
Unique One-Piece High Quality Housing:
A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. The roto-molded housing is made out of black cross-linked polyethylene. A urethane plug is also included if you wish to completely seal the air box.
High Quality Tube:
This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit.
Large 3-Layer Performance Air Filter:
This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cylindrical filter has a large oval (6-3/4" x 4-3/4") flange and is 9" tall inverted top Pro DRY S filter media. The Pro DRY S performance air filter features 3-layers of progressive finer porosity synthetic media providing maximum convenience with 100% polyurethane frame for long life and multiple cleaning cycles.
Premium Hardware:
Premium stainless steel clamps and a silicone coupling are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.
Note:
This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
This part fits the following BMWs:
E9X 335i, 335xi
Large 5-Layer Performance Air Filter:
This sealed intake system utilizes a pre-oiled, large 5" tall conical 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance.
Roto-mold Tube:
This System uses CAD designed, dyno-tuned, roto-mold intake tube to achieve maximum power gains while maintaining a perfect fit.
Hassle-Free Installation:
All necessary hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.
Also available is a Magnum FORCE Intake System Cover (P/N: 54-31918-B)
Emissions Disclaimer:
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicle.
Large 3-Layer "Oil-Free" Performance air Filter:
This sealed intake system utilizes an oil-free, large 5" tall conical 360 degree radial flow performance air filter with 3-Layer progressively finer porosity synthetic media for maximum convenience.
Roto-mold Tube:
This System uses CAD designed, dyno-tuned, roto-mold intake tube to achieve maximum power gains while maintaining a perfect fit.
Hassle-Free Installation:
All necessary hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.
DETAILS:
Also available is a Magnum FORCE Intake System Cover (P/N: 54-31918-B)
Emissions Disclaimer:
This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicle.
This part fits the following BMWs:
E9X 335i 335xi
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
In BMW's with the B58 engine, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with a new high flow inverted performance cone filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and the turbo spooling!
**B58 Engine - BMW 140 240 340 440 - (B58 Intake)**
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.
7" Tall Air Filter:
This intake system utilizes an oil free, 7" tall conical 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance.
High Quality Tube:
This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit.
Carbon Fiber Look Cover w/ Auxiliary Air Inlet:
This carbon fiber look cover is constructed with lightweight vacuumed formed ABS plastic for underhood appearance. A urethane plug is also included if you wish to block off the auxiliary air inlet.
Hassle-Free Installation:
All clamps, coupling and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts.
Note 1:
Does NOT fit Convertible models.
Note 2:
This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.
In BMW's with the B46 engine, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with a new high flow inverted performance cone filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and the turbo spooling!
**B48/46 Engine (Transversally mounted BMW / MINI engine, intake on the right)**
7" Tall "Oil Free" Air Filter:
This intake system utilizes an oil free, 7" tall conical 360 degree radial flow performance air filter with 3-layers of synthetic media providing maximum airflow and performance.
High Quality Tube:
This system uses a high quality, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit.
Lightweight Vacuum Form Plastic Cover w/ Auxiliary Air Inlet:
Creates a stealthy under-hood look while reducing air intake noise without sacrificing power. A urethane plug is also included if you wish to block off the auxiliary air inlet.
Hassle-Free Installation:
All clamps, coupling and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts.
DETAILS:
Note 1:
Does NOT fit Convertible models.
Note 2:
This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.
This Stage 2 Sealed Intake produces up to 12hp and 16lbs. x ft. torque and outflows the factory intake by 56%. Fully enclosed in a molded plastic housing. this air intake system features a reusable air filter that improves airflow for increased horsepower and torque. The housing features auxiliary inlet duct for better airflow as well as a black vacuum formed plastic cover that provides ready access to the filter for servicing. This intake system also features a insulated molded plastic tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance.
Maximum Flow Pro5R Filter
This intake kit replaces your restrictive factory air box. It features a 1.6mm powder-coated steel heat shield, heat-resistant molded intake tube, trim sealed to seal out hot engine air, and a custom application-specific aFe brand cotton filter.
This version uses aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horsepower and torque, improving acceleration as well as throttle response.
This part fits the following BMWs:
2003 - 2006 E60 Sedan 525i 530i
Maxiumum Flow Pro5R Filter
11.75 hp and 10.50 lb/ft torque gain!
This intake kit replaces your restrictive factory air box. It features a 3-angle velocity stack adapter, heat-block molded intake tube, 1.6mm powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.
This version uses aFe's highest flowing filter media, which uses a light oil gauze to filter out dirt and particulates while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
By removing your stock intake air box, you are removing the most restrictive portion of your V8's intake system, increasing both horsepower and torque, improving acceleration as well as throttle response.
11.75 hp gain at 5900 rpm
10.50 lb/ft torque at 4000rpm
Clickhere for installation instructions.
This part fits the following BMWs:
2003 - 2010 E60 Sedan 550i
2004 - 2010 E63 6 Series Coupe 650i
This Torque Booster tube is a great upgrade to your Stage 1 air intake, and can even be used to upgrade your factory intake system. Constructed of 3-ply silicone, it's smoother for less turbulence and more durable for less maintenance.
Since 1999, aFe (Advanced FLOW Engineering) has been developing and manufacturing high quality accessories in their facility in Corona, California. Starting with air filters and intake systems, and now expanding into exhaust systems, suspension components, tuning modules, and more, aFe products are a great way to improve the performance of your BMW without altering its fundamental character. Owned by a BMW enthusiast, aFe power is recognized the world over as a leader in quality performance products for your BMW.
This part fits the following BMWs:
2001-2007 E46 M3
If you are looking to replace your stock chargepipe for better reliability and higher performance, the Burger Motorsports designed and Phoenix Racing built Performance Aluminum Chargepipe is an excellent choice! This aluminum chargepipe is significantly stronger than the stock plastic pipe and the powder coated aluminum looks great and will resist any corrosion. Plus, this chargepipe features a 3 inch design for optimal flow at all RPMs, prevent restriction that would normally be seen with the stock pipe. This is perfect for someone looking to upgrade a stock or tuned N54!
Specs and Features:
O-rings and retaining clip must be reused from the original pipe or purchased new for proper installation.
If you are looking to replace your stock chargepipe for better reliability and higher performance, the Burger Motorsports designed and Phoenix Racing built Performance Aluminum Chargepipe is an excellent choice! This aluminum chargepipe is significantly stronger than the stock plastic pipe and the powder coated aluminum looks great and will resist any corrosion. Plus, this chargepipe features a 3 inch design for optimal flow at all RPMs, prevent restriction that would normally be seen with the stock pipe.
In addition, this pipe also includes a Tial BOV flange for easy installation of a Tial BOV without any modifications needed to the chargepipe. This is perfect for someone looking to upgrade a tuned or heavily modified N54!
Specs and Features:
O-rings and retaining clip must be reused from the original pipe or purchased new for proper installation.