click to Chat Live
Contact YouTube Blog Twitter facebook Turner Motorsport on Instagram
1-800-280-6966
 |   Login
  • 0
 |   Login
Shopping Cart (0) Wishlist
Contact

(0) item(s) in your Shopping Cart

Home

Categories

Specials

Gifts & Clothing

  1. Genuine BMW Accessories
  2. Genuine BMW Clothing
  3. Turner Shirts Hats and Gear
  4. Gifts under $25
  5. Gifts under $50
  6. Gifts under $100
  7. Gifts over $100
  8. Gift Certificates
  9. Stocking Stuffers
  10. Gift Packages

Brakes

  1. Brake Overhaul Packages
  2. Brake Pads
  3. Brake Pad Sensors
  4. Brake Rotors
  5. StopTech Big Brake Kits
  6. Brembo Big Brake Kits
  7. Stainless Steel Brake Lines
  8. Brake Fluid
  9. Brake Calipers
  10. Caliper Rebuild Kits
  11. Parking Brake Parts
  12. Brake Master Cylinders
  13. ABS/DSC System Parts
  14. Brake Cooling Ducts & Backing Plates
  15. Brake Pads - Brembo GT BBK Calipers
  16. Brake Pads - StopTech BBK Calipers

Car Care & Accessories

  1. Car Covers
  2. Wheel & Tire Cleaning
  3. Wax, Polish and Cleaning Supplies
  4. Detailing Gear
  5. Leather & Plastic Care
  6. Car Cleaning Supplies
  7. Chassis Paint, Coatings, Sealants, and Rust Conversion

Drivetrain

  1. Differential and Gearing Upgrades
  2. Differential Mounts and Upgrades
  3. OEM Clutch Kits & Clutch Parts
  4. Performance Clutch Kits & Parts
  5. Lightweight Aluminum Flywheel Upgrades
  6. Stock OEM Dual Mass Flywheels
  7. Stainless Steel Clutch Lines
  8. Clutch Parts
  9. UUC Short Shift Kits
  10. Axle Shafts
  11. Driveshafts
  12. B&M Short Shifters
  13. Performance Short Shift Kits
  14. UUC DSSR - Double Sheer Selector Rod
  15. Drivershaft Center Support Bearings
  16. Flex Discs & Guibos
  17. Transmission Mounts
  18. Transmission Parts

Engine Chips

  1. Shark Injector Performance Software, 1996-2005 Models
  2. Sprint Booster Drive-by-Wire Module
  3. Stand-Alone Engine Management

Engine Parts

  1. Engine Performance Packages
  2. Water Pumps
  3. Thermostats
  4. Radiators & Cooling System Overhaul Kits
  5. Radiator Hoses, Cooling Hoses, & Hose Sets
  6. Engine Fans & Fan Clutches
  7. Underdrive Power Pulleys
  8. Schrick Peformance Camshafts
  9. External Engine Parts
  10. Drive Belts & V-Belts
  11. Gaskets, Gasket Sets, Seals, & O-Rings
  12. Crankcase Vent, PCV, and Oil Separator Systems
  13. Motor Mounts
  14. Electrical Sensors, Switches, & Relays
  15. Ignition Parts
  16. Alternator & Alternator Parts
  17. Starter Motors & Starter Parts
  18. Fuel System Parts
  19. Internal Engine Parts
  20. Cylinder Head Parts & Head Bolts
  21. VANOS Units & Parts
  22. Rod Bearing Kits
  23. Oil Coolers & Oil Cooler Parts

Exhaust

  1. Supersprint Performance Exhaust Systems
  2. Performance Headers & Downpipes
  3. Borla Performance Exhaust Systems
  4. Corsa Performance Exhaust Systems
  5. Dinan Free Flow Exhaust Systems
  6. Performance Exhaust Systems
  7. OEM Replacement Mufflers and Exhaust Systems
  8. Exhaust System Upgrades
  9. Exhaust Muffler Tips
  10. Catalytic Converters
  11. Oxygen Sensor - O2 Sensors
  12. Exhaust Gaskets Hangers and Parts

Exterior / Body

  1. Black Grills
  2. Chrome Grills & Trim
  3. Emblems & Decals for Hood, Trunk, and Wheels
  4. Painted Reflectors
  5. Front Spoilers, Bumper Covers, & Air Dams
  6. Rear Spoilers, Rear Wings, & Aprons
  7. Body Trim Parts & Accessories
  8. Hood & Trunk Shocks, Struts
  9. License Plate Brackets & License Plate Frames
  10. Mirror Kits & Mirror Parts
  11. Window Regulators & Motors
  12. Wiper Blades, Wiper Pumps, & Wiper Motor Parts
  13. Hood Pins and AeroCatch Latches
  14. Racing Tow Hooks and Tow Straps
  15. Aero & Body Kits

Intake

  1. aFe Cold-Air Intake Kits
  2. Turbos & Active Autowerke Superchargers
  3. Dinan Cold Air Intake Kits
  4. Performance Intake Kits
  5. aFe Performance Air Filters
  6. K&N Performance Air Filters
  7. Replacement Cone Air Filters (for Cold Air Intakes)
  8. Intake Cleaning & Recharging Kits
  9. Intake Manifold Components (DISA, Vacuum, CCV, Etc)
  10. Mass Air Sensor & Air Flow Meters
  11. Intake Boots & Hoses
  12. Throttle Body Parts

Interior

  1. Floor Mats
  2. Gauge Kits and Data Acquisition
  3. Auxiliary Input Adaptors for BMW
  4. Pedal Sets
  5. Escort Radar Detectors
  6. Factory Steering Wheels
  7. MOMO Steering Wheels
  8. Shift Knobs, Shift Boots, & Shift Handles
  9. Seats & Seat Accessories
  10. Seat Belts and Racing Harnesses
  11. Cup Holders and Storage
  12. Carbon Fiber Interior Parts
  13. Heating & Air Conditioning
  14. Interior Switches and Switchgear
  15. Sunshades & Windscreens
  16. Interior Trim & Accessories

Lighting

  1. Euro Clear Turn Signals, Parking Lights, & Tail Lights
  2. Turn Signals / Parking Lights
  3. Bulbs for Headlights, Turn Signals and Tail Lights
  4. Headlights, Headlight Lenses, & Headlight Parts
  5. Fog Lights, Fog Light Lenses, & Fog Light Parts
  6. Tail Lights
  7. Stealth Bulbs

Maintenance

  1. Routine Maintenance & Tune-Up Packages
  2. Oil Filters & Oil Filter Kits
  3. Air Filters
  4. Fuel Filters
  5. Cabin Air Filters, Heppa Filters, & Microfilters
  6. Transmission Filter Kits & Transmission Service Parts
  7. Ignition Coils
  8. Spark Plugs
  9. Bentley Repair / Service Manuals
  10. Service Reset Tools & Fault Code Readers
  11. Anti-Freeze and Coolant
  12. Engine Oils - Genuine BMW and OEM
  13. Power Steering and Hydraulic Fluids
  14. Transmission and Gear Oil - Genuine BMW and OEM
  15. MOTUL Engine Oil and Gear Lubricants
  16. Red Line Oil & Fluids

Suspension

  1. Shocks & Struts
  2. H&R Performance Springs
  3. H&R Cup Kit Shock & Spring Packages
  4. Spring & Shock Packages
  5. Turner / H&R Height Adjustable Spring Sets
  6. Bilstein PSS PSS9 PSS10 Coil Over Suspensions
  7. H&R Coil Over Suspensions
  8. KW Coil Over Suspensions
  9. ST Suspension Coilover Kits
  10. Turner Motorsport TrackSport Coil-Over Suspension Kits
  11. Turner Motorsport Racing Suspension Kits
  12. Chassis Reinforcement Kits & Parts
  13. Sway Bar Kits
  14. Sway Bar Links & Sway Bar Parts
  15. Camber / Caster Kits
  16. Strut Braces & Stress Bars
  17. Control Arm Replacements & Upgrades
  18. Suspension Bushings & Mounts
  19. Wheel Bearings & Hub Assemblies
  20. Steering Racks & Power Steering Pumps
  21. Tie Rods & Steering Parts
  22. Coil Over Spring Hardware

Wheels

  1. Apex Flow Formed Alloy Wheels
  2. Forgeline Custom Forged Alloy Wheels
  3. HRE FlowForm Performance Alloy Wheels
  4. D Force Flow Formed Alloy Wheels
  5. Original BMW Wheels and Wheel Upgrades
  6. Winter Wheel & Snow Tire Packages
  7. Turner Motorsport Wheel Spacers
  8. H&R Wheel Spacers
  9. Wheel Bolts, Wheel Studs and Nuts
  10. Wheel Emblems, Caps, and Accessories

Tools

  1. Alignment Tools
  2. Battery Chargers and Tenders
  3. Brake Tools
  4. Clutch Alignment Tools
  5. Coil Over Wrenches
  6. Cylinder Head and VANOS Tools
  7. Fan and Fan Clutch Tools
  8. Fault Code Readers and OBD Scan Tools
  9. Fuel System Tools
  10. Genuine BMW Tool Kits
  11. Oil Service Tools
  12. Sockets
  13. Spark Plug Sockets
  14. Transmission and Differential Tools
  15. Wheel Pin Tools
  16. Workshop Chemicals

Clearance

Choose BMW

BMW 1 Series

  1. (E82) 1-series Coupe 2008+
  2. (E88) 1-series Convertible 2008+

BMW 2 Series

  1. (F22) 2-Series Coupe 2014+
  2. (F23) 2-Series Convertible 2014+
  3. (F87) M2 2016+

BMW 3 Series

  1. (E21) 3-Series 1977-1983
  2. (E30) 3-series 1984-1991
  3. (E30) M3 1988-1991
  4. (E36) 3-series 1992-1999
  5. (E36) M3 1995-1999
  6. (E46) 3-Series 1999-2005
  7. (E46) M3 2001-2006
  8. (E90) 3-Series Sedan 2006-2011
  9. (E90) M3 Sedan 2008-2013
  10. (E91) 3-Series Touring 2006-2013
  11. (E92) 3-Series Coupe 2007-2013
  12. (E92) M3 Coupe 2008-2013
  13. (E93) 3-Series Convertible 2007-2013
  14. (E93) M3 Convertible 2008-2013
  15. (F30) 3-Series Sedan 2012+
  16. (F31) 3-Series Touring 2014+
  17. (F80) M3 2015+

BMW 4 Series

  1. (F32) 4-Series Coupe 2014+
  2. (F33) 4-Series Convertible 2014+
  3. (F34) 4-Series Gran Turismo 2014+
  4. (F82) M4 Coupe 2015+
  5. (F83) M4 Convertible 2015+

BMW 5 Series

  1. (E34) M5 1991-1993
  2. (E39) M5 2000-2003
  3. (E60) M5 2006-2010
  4. (E28) 5-Series 1982-1988
  5. (E34) 5-Series 1989-1995
  6. (E39) 5-Series 1996-2003
  7. (E60) 5-Series Sedan 2004-2010
  8. (E61) 5-Series Touring 2006-2010
  9. (F10) 5-Series 2011+

BMW 6 Series

  1. (E24) 6-Series 1977-1989
  2. (E63) 6-Series Coupe 2004-2010
  3. (E64) 6-Series Convertible 2004-2010
  4. (F06) 6-Series Gran Coupe 2013+
  5. (F12) 6-Series Coupe 2011+
  6. (F13) 6-Series Convertible 2011+

BMW 7 Series

  1. (E32) 7-Series 1988-1994
  2. (E38) 7-Series 1995-2001
  3. (E65) 7-Series SWB 2002-2007
  4. (E66) 7-Series LWB 2002-2007
  5. (F01) 7-Series SWB 2009+
  6. (F02) 7-Series LWB 2009+

BMW 8 Series

BMW Classics (E9, Bavaria, Isetta, etc)

  1. 2500
  2. 2800
  3. 3.0Si
  4. Bavaria
  5. 2800CS
  6. 3.0CS
  7. 2002
  8. 2002tii
  9. (E12) 528i 1977-1981
  10. (E12) 530i 1975-1978

BMW X Series (SAV)

  1. (E84) X1 Series 2013+
  2. (E83) X3 2004-2010
  3. (F25) X3 2011+
  4. (F26) X4 2015+
  5. (E53) X5 2000-2006
  6. (E70) X5 2007-2013
  7. (F15) X5 2014+
  8. (F85) X5 M 2015+
  9. (E71) X6 2008+
  10. (F16) X6 2015+
  11. (F86) X6 M 2015+

BMW Z Series

  1. (E36/7) Z3 1997-2002
  2. (E85) Z4 M Roadster
  3. (E85/E86/E89) Z4 2003+
  4. (E86) Z4 M Coupe
  5. (E52) Z8 2000-2003

BMW 1600-2002 / tii

BMW i Series

  1. (I01) BMW i3 2014+
  2. (I12) BMW i8 2014+

MINI Cooper and Cooper S

Racing

Racing Home

Racing News

Racing Schedule

Racing Photo Gallery

Gallery

Photo Gallery

Wallpaper

Project Cars

  1. Project i8
  2. Project F80 M3
  3. Turner F82 M4
  4. Turner X5 M
  5. Turner F22 2 Series
  6. Turner F13 M6
  7. Turner F10 M5
  8. Turner F30 335i
  9. Turner E9X M3
  10. Turner E92 335i
  11. Turner E82 1 Series
  12. Turner ActiveE (100% Electric)
  13. Turner E46 M3
  14. Turner E46 330i ZHP
  15. Turner E36 M3
  16. Turner E30 M3
  17. Turner MINI Cooper S
  18. McLaren F1
  19. Turner E92 M3 Lime Rock
  20. Turner F80 M3 Silverstone

Video Gallery

Projects

Turner i8

Turner F80 M3

Turner F82 M4

Turner X5 M

Turner F22 2 Series

Turner F13 M6

Turner F10 M5

Turner F30 335i

Turner E9X M3

Turner E92 335i

Turner E82 1 Series

Turner ActiveE (100% Electric)

Turner E46 M3

Turner E46 330i ZHP

Turner E36 M3

Turner E30 M3

Turner MINI Cooper S

McLaren F1

Turner E92 M3 Lime Rock

Turner F80 M3 Silverstone

About Us

About Turner Motorsport

Customer Feedback

The Turner Team

Employment Opportunities

Returns Policy

Shipping Info

Contact Us

Privacy Policy

Security Policy

FAQs

BMW E46 Shark Injector Performance Software, 1996-2005 Models

The easiest software flashing tool in the world! Power & Torque Upgrades in Minutes!

The Shark Injector is an amazing hand-held unit that plugs into your car’s diagnostic port and re-flashes the computer with performance software. The software was developed by renowned BMW tuner Jim Conforti, who has nearly 20 years of BMW engine tuning experience. The Shark Injector is one of the safest and most cost-effective enhancements you can do – offering features and results that other upgrades simply cannot touch. The Shark Injector will also be upgrade-able through its own USB port, allowing you to upgrade to different software as your needs and modifications change (under development).

Why you will love this product -
+ more power and torque, particularly in the mid-range from 3500 RPM to redline,
+ quicker throttle response, giving the car a snappier feel,
+ a safe increase in rev limit (great for staying in gear just a little longer)
+ smoother-running engine with fewer hesitations and dead spots
+ top speed limiter removed
+ true DIY install with step-by-step instructions (no downtime while your computer is shipped somewhere else for the install)
+ Upgrade and Restore features to install/uninstall on the same vehicle
+ Upgrade-able via USB connection with your PC - add a file to better suit your mods (under development)
+ Retains all of your diagnostic, service, maintenance systems and won't interfere with your normal maintenance routines

This software is a major refinement of the stock software. It makes the car much easier to drive with less hesitation, more torque, and incredibly smooth operation. A lot of tuning has been done at the low RPM ranges to improve response. The car won’t hesitate or lag, making the car easier to drive. And with the extra torque you can drive in a higher gear and not have to downshift as often. Theoretically this means better fuel mileage too!

How does it work? The Shark Injector makes changes to the stock BMW software in the areas of fuel enrichment, transition fueling, camshaft timing, ignition timing, and VANOS control to take full advantage of 91+ octane fuel. BMW ‘de-tuned’ cars for the North American market in the event inferior fuel was used. We reverse those changes to gain more horsepower and torque. 91 or higher octane fuel must be used.

How does it install? The Shark Injector plugs into your car’s On Board Diagnostic (OBD) port, located under the dashboard in most cars. At the push of a button the Injector begins communicating with your car’s computer. The Shark handles everything from that point on – reading and copying the stock software, re-loading its own performance version, and checking its work along the way. The whole operation is completed in under 20 minutes. A battery charger with a continuous 10-20amp charge is required (available below if you do not currently own one). Click here for sample installation instructions.


Additional Information:

Click here for our FAQ file for the Shark Injector

Clickhere to view the entire line of Shark Injector products for BMWs and MINI.
You're currently viewing parts for your (E46) 3-Series 1999-2005. Reset your chassis
For accurate results, specify your model below.
  • Tuned specifically for factory Euro Headers and Cats
  • Horsepower and torque gains
  • Faster and smoother throttle response
  • Top speed limiter removed
  • Extremely easy to install/uninstall
  • Reversible and reusable

Performance software is a must-have upgrade on your E46 M3 and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!

The M3 performance software was developed on the dyno to create maximum power and torque using premium 93+ octane fuel and revising the torque limiters in the ECU. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. Choose between a stock or raised 8,100 RPM rev limit. The top speed limiter is removed. By fine tuning these maps we've been able to improve the S54 engine beyond what BMW did by making more power and torque and a smoother-running engine.

The Shark Injector plugs into the diagnostic port inside the E46 cabin. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.


E46 M3 Dyno
Power and Torque Gains
Stock: 278.2 rear wheel Horsepower, 235.3 rear wheel Torque
Sharked: 287.3 rear wheel Horsepower, 242.1 rear wheel Torque
Peak Gain: 9.1 rear wheel Horsepower and 6.8 rear wheel Torque
(Torque gain is significant between 3000-6000 rpm, with a max gain (biggest improvement) of 14 lb-ft rear wheel Torque @ 4340 rpm)

This performance software was developed specifically for the factory M3 Euro headers and stock Euro cats. Early in our E46 software development we found that the Euro headers and cats made a significant torque gain over the US spec but special software was needed to get the most out of them and to address some of the differences (Euro EGT sensor is in a different spot). The factory Euro headers and cats remain the top choice for performance and OEM quality.

Shark Injector Installation Instructions
(click to expand)
Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 93.
Shark Injector FAQ
(click to expand)

This software alters the federally-mandated emissions equipment on your car. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. TMS does not guarantee or promote that this software will pass a federal or state or local emissions test. You can download the waiver here.

This item fits the following BMWs:
2001-2006 E46 BMW M3 (US models only)
Part #: TMS1054
Price: $261.75 (USD) 
Free Shipping Free Shipping
  • Unlock torque and horsepower
  • Smoother engine with less hesitation
  • Improved throttle response
  • Rev limit increased to 7000
  • Top speed limiter removed
  • Installs in minutes!

Performance software is a   must-have  upgrade on your BMW and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!

The M54 performance software was developed on the dyno to create maximum power and torque using premium 91+ octane fuel while maintaining BMW reliability and smoothness. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. A lot of tuning has been done at the low RPM ranges to improve response. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. We also raise the rev limit to 7,000 and remove the top speed limiter. By fine tuning these maps we've been able to improve the M54/M56 engine beyond what BMW did by making more power and torque and a smoother-running engine.

The Shark Injector plugs into the diagnostic port inside the E46 cabin. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.

2001-2005 E46 330i (M54 engine) Performance Software Peak Gains

E46 330i dyno chart
HP Gain+ 4 @ 6100 RPM
Torque Gain+ 7 @ 3400 RPM
New Rev Limit7000 RPM


2004-2006 E46 330i ZHP (M54 engine) Performance Software Peak Gains

330i ZHP dyno chart
HP Gain+ 14 @ 6400 RPM
Torque Gain+ 11 @ 4100 RPM
New Rev Limit7000* RPM

E46 330i ZHP Rev Limits
(click to expand)
There are multiple versions of stock ZHP software and BMW used different rev limits in some of them. A ZHP automatic will always have a lower rev limit than a manual in the interest of preserving the automatic transmission. Our engine software will alter the rev limit set in the ECU but other limits in the auto transmission programming will maintain the factory rev limit. Manual ZHPs have stock rev limits that vary - some are set as high as 6920 by the factory software. The Shark ZHP software sets all manual tranmission rev limits to 6920.
Read what others are saying!
(click to expand)
greekpsycho, 325i: "I sharked my 325 a few months ago and I noticed a huge difference. This REALLY brought out the best of my car."
TJ710, 325i: "just did this to my own stock 325i about 3 weeks ago and I definitely felt a difference and it put a smile on my face."
Dahmwern, 325Ci: "I'm definitely noticing a sweetly smooth power delivery, as well as a noticeable power increase in the low end as you being to accelerate (especially up moderate inclines). Note: This is NOT placebo effect. I drove the same route before and after to compare, and while its not perfectly scientific, it was quite obvious that there were some changes that took place - changes for the better. Like many mods, the car should have come this way!"

Rob43, 330i: "besides the 7000rpm, removal of the top speed limiter, and very good(improved) throttle response, I got 6.5WHP on the dyno with my Shark injector. That’s worth $300 bucks in my book."
xixixi, 330xi: "I got the shark for my 330xi, I love it. Shark > all. Why? It gives gains that other "custom tunes," can't. What I liked the most about my shark is shift points. If you can shift decent, you can stay in the 5.5k+ range."
Douglas, 330Ci: "Just last week I had your Shark Injector installed in my 2001 330Ci. What a difference it makes! I already loved the car and it’s a great car to drive, but this takes it to a new level."
Steve 330i: "I bought the software and CAI by Jim C. Installed both at the same time and have put around 500 miles on over the last month. The car is amazing to drive, and the software seemed to make the power band a bit flatter, less of a dip and a bit better at the lower RPMS."

nleksan, 330i ZHP: "Ditch the Brand XXXXX software and switch it up for the newly-released Conforti Shark Injector for your car. It will give you a higher redline, no top-speed, more power, and much better throttle response, even over the Brand XXXXX."
3579az, 330i ZHP: " The throttle response problem has been solved. I can now perform perfect rev-matches with ease, unlike before. I've been heel-and-toe downshifting all day with a major success rate of perfect shifts, which is a LOT more than could be said compared to stock. I can now pull cleanly through the rev range without feeling any hesitation or dead spots. I have confirmed that the dead spot that was painfully obvious before the flashing… is gone."
pyreguy, 330i ZHP: "I have been VERY pleased with mine. The dead spot being irradiated was the best thing EVER."
Scott, 330i ZHP: "Very increased acceleration - especially from around 3,000 to 6,000. The car feels like a bullet! It is the same smooth kind of power too - just more of it, delivered continuously to the top rpm. So 3rd feels more like 2nd gear now! Throttle transitions are much more refined. So when in low gears, on and off throttle changes are very seamless and smooth (no jerking) - and the change has made shifting gears easier - especially first to second. So now my car is much more fun to drive and shows engine performance that is better matched to the incredible handling ability it has. I'm very pleased with this upgrade and can't thank you enough!!!
Shark Injector Installation Instructions
(click to expand)
Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.
Shark Injector FAQ
(click to expand)

This item fits the following BMWs:
2001-2006   E46 BMW  330i 330ci 330xi
Part #: TMS269
Price: $261.75 (USD) 
Free Shipping Free Shipping
  • Tuned for headers and no cats
  • Horsepower and torque gains
  • Faster and smoother throttle response
  • Top speed limiter removed
  • Extremely easy to install/uninstall
  • Reversible and reusable

Performance software is a must-have upgrade on your E46 M3 and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!

The M3 performance software was developed on the dyno to create maximum power and torque using premium 91+ octane fuel and revising the torque limiters in the ECU. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. The rev limit is raised to 8,100 RPM rev limit and the top speed limiter is removed. By fine tuning these maps we've been able to improve the S54 engine beyond what BMW did by making more power and torque and a smoother-running engine.

The Shark Injector plugs into the diagnostic port inside the E46 cabin. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.


E46 M3 Dyno
Power and Torque Gains (stock header config)
Stock: 278.2 whp / 235.3 wtrq
Sharked: 284.2 whp / 236.9 wtrq
Peak Gain 6.0 rear wheel HP and 1.6 rear wheel Torque
(note: the max gain (biggest improvement) is 9 rear wheel HP between 7000 and 8000 rpm)

The software for running without cats includes special programming tweaks that will ignore certain readings from the post-cat O2 sensors and rely on the data from the first set of O2 sensors and the EGT sensor. The post-cat O2 sensors must still remain in place in the exhaust.

Shark Injector Installation Instructions
(click to expand)
Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is either 91 or 93.
Shark Injector FAQ
(click to expand)

This part alters or deletes the emissions equipment on your car. Because of this, we require a waiver of emissions compliance to be signed and either e-mailed or faxed to Turner Motorsport before shipping. You can download the waiver here.

This item fits the following BMWs:
2001-2006 E46 BMW M3 (US models only)
2001-2002 Z3 BMW Z3 M Roadster M Coupe
Part #: TMS158
Price: $261.75 (USD) 
Free Shipping Free Shipping
  • Saves your last Sport Mode setting
  • Horsepower and torque gains
  • Faster and smoother throttle response
  • Top speed limiter removed
  • Extremely easy to install/uninstall
  • Reversible and reusable

Performance software is a must-have upgrade on your E46 M3 and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!

The M3 performance software was developed on the dyno to create maximum power and torque using premium 91+ octane fuel and revising the torque limiters in the ECU. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. Choose between a stock or raised rev limit. The top speed limiter is removed. By fine tuning these maps we've been able to improve the S54 engine beyond what BMW did by making more power and torque and a smoother-running engine.

The Shark Injector plugs into the diagnostic port inside the E46 cabin. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.


E46 M3 Dyno
Power and Torque Gains
Stock: 278.2 whp / 235.3 wtrq
Sharked: 284.2 whp / 236.9 wtrq
Peak Gain 6.0 rear wheel HP and 1.6 rear wheel Torque
(note: the max gain (biggest improvement) is 9 rear wheel HP between 7000 and 8000 rpm)

The Sport Mode Memory option will remember if you left the car in Sport Mode or not. When you restart the car it will be in the last setting you used. This is perfect for owners who use Sport Mode all the time. You won't have to remember to press the button each time you start the car. The Sport Mode button functions the same as before so you can turn Sport on/off at any time. The software will remember which one you left it in.

Shark Injector Installation Instructions
(click to expand)
Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is either 91 or 93.
Shark Injector FAQ
(click to expand)

This item fits the following BMWs:
2001-2006 E46 BMW M3 (US models only)
Part #: TMS5463
Price: $261.75 (USD) 
Free Shipping Free Shipping
  • Specific Race software developed for SCCA Club Racing
  • Horsepower and torque gains
  • Faster and smoother throttle response
  • Top speed limiter removed
  • 8,600 RPM rev limit
  • Extremely easy to install/uninstall
  • Reversible and reusable

Performance software is a must-have upgrade on your E46 M3 and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!

The T2 M3 software was developed during our 2-year campaign with the E46 M3 in the SCCA T2 club racing class (multiple wins and 3rd in 2006 Runoffs, highest finishing E46 M3) From 2013 the E46 M3 was reclassified to the T3 class. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. The rev limit is raised to 8,600 RPM rev limit and the top speed limiter is removed. By fine tuning these maps we've been able to improve the S54 engine beyond what BMW did by making more power and torque and a smoother-running engine. This software is a more aggressive tune than our standard street and Race software and additional engine maintenance and care is advised, including more frequent engine oil changes, oil analysis, valve adjustments, and other maintenance common to race-only vehicles. The minimum octane for this software is 93 AKI.

The Shark Injector plugs into the diagnostic port inside the E46 cabin. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.

Shark Injector Installation Instructions
(click to expand)
Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 93.
Shark Injector FAQ
(click to expand)

This part alters or deletes the emissions equipment on your car. Because of this, we require a waiver of emissions compliance to be signed and either e-mailed or faxed to Turner Motorsport before shipping. You can download the waiver here.

This item fits the following BMWs:
2001-2006 E46 BMW M3 (US models only)
Part #: TMS387
Price: $261.75 (USD) 
Free Shipping Free Shipping
  • Unlock torque and horsepower
  • Smoother engine with less hesitation
  • Improved throttle response
  • Rev limit increased to 7000
  • Top speed limiter removed
  • Installs in minutes!

Performance software is a   must-have  upgrade on your BMW and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!

The M54 performance software was developed on the dyno to create maximum power and torque using premium 91+ octane fuel while maintaining BMW reliability and smoothness. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. A lot of tuning has been done at the low RPM ranges to improve response. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. We also raise the rev limit to 7,000 and remove the top speed limiter. By fine tuning these maps we've been able to improve the M54/M56 engine beyond what BMW did by making more power and torque and a smoother-running engine.

The Shark Injector plugs into the diagnostic port inside the E46 cabin. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.

2001-2006 E46 325i (M54/M56 engine) Performance Software Peak Gains

E46 325i dyno chart
HP Gain+ 7 @ 5800 RPM
Torque Gain+ 7 @ 4700 RPM
New Rev Limit7000 RPM


E46 325 M54 vs. M56 Engines
(click to expand)
Does your 325 have the M56 "SULEV" Engine? Many of the 325's produced for the US -- particularly in California, Massachusetts, and a few other states -- came with a different engine, the M56 which meets "SULEV" (Super Ultra Low Emission Vehicle) emissions classification. A visual inspection of your engine (as shown below) is the best way to determine if your 325 has the M56 SULEV engine.
Visual Differences of M54 and M56 engine
Read what others are saying!
(click to expand)
greekpsycho, 325i: "I sharked my 325 a few months ago and I noticed a huge difference. This REALLY brought out the best of my car."
TJ710, 325i: "just did this to my own stock 325i about 3 weeks ago and I definitely felt a difference and it put a smile on my face."
Dahmwern, 325Ci: "I'm definitely noticing a sweetly smooth power delivery, as well as a noticeable power increase in the low end as you being to accelerate (especially up moderate inclines). Note: This is NOT placebo effect. I drove the same route before and after to compare, and while its not perfectly scientific, it was quite obvious that there were some changes that took place - changes for the better. Like many mods, the car should have come this way!"

Rob43, 330i: "besides the 7000rpm, removal of the top speed limiter, and very good(improved) throttle response, I got 6.5WHP on the dyno with my Shark injector. That’s worth $300 bucks in my book."
xixixi, 330xi: "I got the shark for my 330xi, I love it. Shark > all. Why? It gives gains that other "custom tunes," can't. What I liked the most about my shark is shift points. If you can shift decent, you can stay in the 5.5k+ range."
Douglas, 330Ci: "Just last week I had your Shark Injector installed in my 2001 330Ci. What a difference it makes! I already loved the car and it’s a great car to drive, but this takes it to a new level."
Steve 330i: "I bought the software and CAI by Jim C. Installed both at the same time and have put around 500 miles on over the last month. The car is amazing to drive, and the software seemed to make the power band a bit flatter, less of a dip and a bit better at the lower RPMS."

nleksan, 330i ZHP: "Ditch the Brand XXXXX software and switch it up for the newly-released Conforti Shark Injector for your car. It will give you a higher redline, no top-speed, more power, and much better throttle response, even over the Brand XXXXX."
3579az, 330i ZHP: " The throttle response problem has been solved. I can now perform perfect rev-matches with ease, unlike before. I've been heel-and-toe downshifting all day with a major success rate of perfect shifts, which is a LOT more than could be said compared to stock. I can now pull cleanly through the rev range without feeling any hesitation or dead spots. I have confirmed that the dead spot that was painfully obvious before the flashing… is gone."
pyreguy, 330i ZHP: "I have been VERY pleased with mine. The dead spot being irradiated was the best thing EVER."
Scott, 330i ZHP: "Very increased acceleration - especially from around 3,000 to 6,000. The car feels like a bullet! It is the same smooth kind of power too - just more of it, delivered continuously to the top rpm. So 3rd feels more like 2nd gear now! Throttle transitions are much more refined. So when in low gears, on and off throttle changes are very seamless and smooth (no jerking) - and the change has made shifting gears easier - especially first to second. So now my car is much more fun to drive and shows engine performance that is better matched to the incredible handling ability it has. I'm very pleased with this upgrade and can't thank you enough!!!
Shark Injector Installation Instructions
(click to expand)
Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.
Shark Injector FAQ
(click to expand)

This item fits the following BMWs:
2001-2006   E46 BMW  325i 325ci 325xi
Part #: E46-325-SHARK
Price: $261.75 (USD) 
Free Shipping Free Shipping

An additional tune file to use with the plug & play Bosch Motorsport ECU in the E46 M3. When you buy the Bosch ECU from us a tuned file is included but we can also provide you with additional files (the Bosch ECU can hold up to three files, switchable from the Sport button on the center console). We can tune for specific modifications such as cams, headers, and even supercharger kits, and also fuel type, throttle, rev limits, or anything else that you need. Since the Bosch ECU is a true motorsport ECU, it is tuneable on its own using a laptop and the Bosch expansion harness. You can make your own files and changes on the fly. But if you did not purchase the expansion harness or want one of our pre-made dyno-tuned files, add this item to your cart. A Turner rep will be in touch to discuss your needs.

Requires plug & play Bosch Motorsport ECU system.

Part #: MS4-S54-ADD
Price: $250.00 (USD) 
Quantity:   
  • Unlock torque and horsepower
  • Smoother engine with less hesitation
  • Improved throttle response
  • Rev limit increased to 7000
  • Top speed limiter removed
  • Installs in minutes!

Performance software is a must-have upgrade on your BMW and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!

The M52TU performance software was developed on the dyno to create maximum power and torque using premium 91+ octane fuel while maintaining BMW reliability and smoothness. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. We also raise the rev limit to 7,000 and remove the top speed limiter. By fine tuning these maps we've been able to improve the M52TU engine beyond what BMW did by making more power and torque and a smoother-running engine.

The Shark Injector plugs into the diagnostic port inside the E46 cabin. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.

1999-2000 E46 323i (M52TU engine) Performance Software Peak Gains

E46 323 dyno chart
HP Gain+ 14 @ 6000 RPM
Torque Gain+ 6 @ 5000 RPM
New Rev Limit7000 RPM


1999-2000 E46 328i (M52TU engine) Performance Software Peak Gains

E46 328i dyno chart
HP Gain+ 15 @ 6200 RPM
Torque Gain+ 12 @ 3500 RPM
New Rev Limit7000 RPM

Read what others are saying!
(click to expand)
DBALZE, 323Ci: "The shark injector is awesome! After I put it in, I could definitely feel the quicker throttle response and more power throughout the acceleration curve. Definitely worth the money to me!"
chrisct, 323Ci: "I installed an XXX short ram cold air intake and the shark injector on my 323Ci and I couldn't be happier. For me the biggest advantage was smoothing out the throttle response, but it definitely feels snappier."
hqbmw, 328Ci: "This Shark really woke up my 328Ci. Cost per performance increase is as good as it gets! Also getting 10 to 15% better fuel economy in "normal" driving."
huyner328, 328Ci: "First change I would like to mention is the increased throttle response, as soon as I shifted and floored it, the car would pull. From 3400rpms to about 5000rpms I think was the sweet spot that gave me a nice little grin on my face. Next I tested the Redline of my car, yup another grin on my face. I definitely noticed that the car moved a little bit quicker with not as much gas consumption on the MPG Gauge. Overall, awesome mod."
Shark Injector Installation Instructions
(click to expand)
Shark Injector installation instructions
A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
The minimum octane fuel for this software is 91.
Shark Injector FAQ
(click to expand)

This item fits the following BMWs:
1999-2000 E46 BMW 323i 323ci 328i 328ci
Part #: TMS3500
Price: $261.75 (USD) 
Free Shipping Free Shipping
If you're planning on using the Shark Injector to add performance engine software to your BMW, a battery charger such as this one is required. The charger supplements the vehicle battery and provides uninterrupted power during the flashing process. This charger comes with a 20A boost mode for 30 minutes which should be enough time to complete the Shark Injector installation. Other chargers with manual power and timer controls are also acceptable (most shops will have a suitable charger for flashing vehicles).

Click here for more information on Shark Injector OBD-II performance software.

Features:
  • multiple convenient charging modes
  • 2-6 amp trickle charge mode
  • 10 amp standard charge mode
  • 20 amp boost mode
  • 80 amp engine crank assist mode
  • fully automatic trickle charge
  • on-board circuit breaker protection
  • LED status indicators
  • engine cranking assist
  • UL certified
  • Part #: TMS1471
    Price: $159.95 (USD) 
    Free Shipping Free Shipping
    on orders $200 and up
    Quantity:   
    • Horsepower and torque gains
    • Faster and smoother throttle response
    • Top speed limiter removed
    • Optional convenience features
    • Extremely easy to install/uninstall
    • Reversible and reusable

    Performance software is a must-have upgrade on your E46 M3 and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!

    The M3 performance software was developed on the dyno to create maximum power and torque using premium 91+ octane fuel and revising the torque limiters in the ECU. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. The rev limit is raised to 8,100 RPM rev limit and the top speed limiter is removed. By fine tuning these maps we've been able to improve the S54 engine beyond what BMW did by making more power and torque and a smoother-running engine.

    The Shark Injector plugs into the diagnostic port inside the E46 cabin. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.


    E46 M3 Dyno
    Power and Torque Gains
    Stock: 278.2 whp / 235.3 wtrq
    Sharked: 284.2 whp / 236.9 wtrq
    Peak Gain 6.0 rear wheel HP and 1.6 rear wheel Torque
    (note: the max gain (biggest improvement) is 9 rear wheel HP between 7000 and 8000 rpm)

    Shark Injector Installation Instructions
    (click to expand)
    Shark Injector installation instructions
    A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
    The minimum octane fuel for this software is either 91 or 93.
    Shark Injector FAQ
    (click to expand)

    This item fits the following BMWs:
    2001-2006 E46 BMW M3 (US models only)
    Part #: TMS3967
    Price: $261.75 (USD) 
    Free Shipping Free Shipping
    Get notified about money saving
    specials & deals for your BMW
    enter your email address
  • 22 years of BMW Tuning.
  • Award winning service.
  • 10,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook




    • 1-800-280-6966
      Mon-Thur 9am-6pm ET, Fri 9am-5pm ET

      • © TurnerMotorsport.com 1993-2016. All Rights Reserved.