Packaged by Turner BMW Drivetrain Parts

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and OE quality bushings that will give you a tighter shifting feel and will hold up like a day 1 BMW.

This kit is perfect to restore your driving pleasure!

See the included components under Kit Contents below.

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and OE quality bushings that will give you a tighter shifting feel and will hold up like a day 1 BMW.

This kit is perfect to restore your driving pleasure!

See the included components under Kit Contents below.

Drive line slop is often caused by faulty engine and transmission mounts. This can result in knocking noises under heavy acceleration, excessive vibration, and a less responsive feel in power. These OEM Lemforder and Rein mounts are perfect to eliminate these problems and provide long lasting reliability.

Included in this kit:

• OEM Lemforder Engine Mount (x2)
• OEM Rein Transmission Mount (x2)
• New Installation Hardware

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and OE quality bushings that will give you a tighter shifting feel and will hold up like a day 1 BMW.

This kit is perfect to restore your driving pleasure!

See the included components under Kit Contents below.

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.

Tired of dealing with excess shifter slop and a mushy shifter? The Turner Shifter Rebuild & Upgrade Kits will restore your shifter's crisp feel and eliminate excessive movement that develops over time with wear. Included in this kit are all the common wear components and upgraded bushings that will give you a tighter shifting feel than traditional rubber bushings and will resist wear significantly longer.

This kit is perfect to restore your driving pleasure and will be the last shifter rebuild you will ever need!

See the included components under Kit Contents below.

Drive line slop is often caused by faulty engine and transmission mounts. This can result in knocking noises under heavy acceleration, excessive vibration, and a less responsive feel in power. These OEM Corteco mounts are perfect to eliminate these problems and provide long lasting reliability.

Included in this kit:

• OEM Corteco Engine Mount (x2)
• OEM Corteco Automatic Transmission Mount (x2)
• New Installation Hardware

When installing a new clutch, it is important to replace old hardware and common wear items. This ensures both a smooth and reliable installation. This also allows you to perform maintenance while everything is apart as opposed to a needing to make future repairs when everything is back together. Included in this kit are all necessary clutch installation components and parts that should be replaced while easily accessible.

Fits the following BMWs:
E9X BMW 328i N52 3.0L

When installing a new clutch, it is important to replace old hardware and common wear items. This ensures both a smooth and reliable installation. This also allows you to perform maintenance while everything is apart as opposed to a needing to make future repairs when everything is back together.

Included in this kit:

• Genuine BMW hardware with the exception of flywheel bolts which are an original equipment supplier
• 2 Genuine BMW E46 M3 transmission mounts
• Genuine BMW clutch fork pivot pin
• Original Equipment Supplier driveshaft washer gasket
• MTC universal flex disc (AKA Guibo) with hardware
• MTC driveshaft center carrier
• FAG pilot bearing
• Victor Reinz rear main seal

Fits the following BMWs:
E36 BMW M3 S50/52

Complete your Getrag 420G six-speed manual swap with a comprehensive shifter solution engineered for precision and durability. This all-in-one kit features our double-adjustable short shifter, dual-shear selector rod, heavy-duty shifter arm, upgraded bushings, and all required installation hardware for crisp gear engagement, reduced shifter slop, and confidence-inspiring performance you'll feel with every shift!

TURNER MOTORSPORT DOUBLE ADJUSTABLE SHORT SHIFT KIT

BMWs have historically been plagued by very long throw shifters from the factory - luckily, we've developed the solution. Our short shifter system is height- and throw-adjustable, offering up to a 52% reduction in throw over stock. Double adjustability enables you to find the sweet spot that will make you excited to drive your car again. Installation of this kit is also of the easiest to tackle. Compared to the competition, a custom bearing cup allows for easy installation from inside the car (on applications that use the stock shifter arm).

Benefits:

Adjustable between a conservative short throw to ultra short throw Ultra crisp shifter feel - quicker, more precise shifts More engaging driving experience Adjustability:

Independently adjustable knob height 22mm adjustment range to fine-tune shifter throw and feel. Note: knob height also affects throw reduction to some degree Independently adjustable shifter throw Adjustable by raising and lowering the lower lever position relative to the pivot ball. Note: ball position also affects knob height by ~10mm range Combined total throw adjustment range ​32 to 52 % reduction in throw over stock E36 shifter. A throw adjustment can be done in the car without removing the shifter DSSR (109MM) - E36 420G

Like all OEM selector rods, the factory part uses single-shear attachment, allowing for deflection within the shifter linkage. The result? Vague, imprecise gear selections that detract from your overall driving experience. The dual-shear selector rod (DSSR) design spreads the torsional force of gear selections across the selector rod joint, reducing deflection for increased precision. Our DSSR is precision-machined from durable 304 stainless steel to further reduce deflection and resist corrosion.

Features:

Provides a more positive feel in the shifter by reducing play in the linkage due to minimized deflection Manufactured from 304 stainless steel for superior corrosion resistance and durability Replacement for 25112228055 (European E36 M3 Evolution) HEAVY-DUTY SHIFTER ARM - E36 420G

To cater to the six-speed swap E36 community, we designed a direct replacement and upgrade for the unavailable, 420G-specific shifter arm. Precision-machined from 6061-T6 billet aluminum and clear anodized, this replacement carrier is durable, lightweight, and built to last. It is dimensionally identical to the OEM carrier, ensuring compatibility with the OEM shift carrier bushing, shift lever, and Turner Motorsport Double-Adjustable Short Throw Shifter Kit.

Features:

6061-T6 billet aluminum construction provides excellent durability and longevity Mil-spec clear anodized for superior corrosion resistance Dimensionally identical to its OEM counterpart, ensuring compatibility with all factory shifter components POLYURETHANE SHIFTER ARM BUSHING

This shifter bushing is designed to remove the shifter play caused by an old, failed rubber shifter bushing. Manufacturing the bushing from polyurethane instead of rubber reduces the amount of stretch caused by the moving part through the bushing. This maintains the direct crisp feel from your shifter assembly. When your OE shifter arm bushing begins to fail, you will notice slop in shifting, potentially making it easier to miss gears, and it often causes an obvious vibration and movement from the engine RPMs.

Features:

Corrosion-resistant 304 stainless steel mounting sleeve with bonded 70a polyurethane Stiffer bushing results in a crisper shifter feel and a more engaging driving experience. Ready to install out of the box - no modifications required Replaces Genuine BMW part numbers 25111222015 and 25111222652 Improved durability over OEM rubber Made in America Check out the "KIT CONTENTS" tab for a detailed list of everything included in this kit!