BMW Catback Exhaust Systems

Finally the answer to your E36 exhaust woes! Upgrade from your old, crusty or quiet exhaust that lacks the OOMPH you want to hear when stepping on the gas. Our crew at Turner have been describing this exhaust with words like “symphony” and “hearty” with its smooth and low frequency tone. This is the kind of exhaust we stand outside and listen to as our residential test vehicle rolls out from work heading off in the distance while singing the oh so sweet straight six sound.

Our new E36 cat back is a tribute to the E36 M3 in more ways than one. The exhaust features 90s styling exhaust tips to compliment the sharp yet rudimentary body lines. Just like the E36 our exhaust was designed to be raw, straight to the point, lightweight and timeless.

To accomplish these goals our engineers rev’d up their creativity and went straight to work. Adapting straight to the mid-pipes our engineers transformed the lackluster 2.0” tubing and stepped up to a true-dual 2.5” exhaust with an integrated x-pipe to smooth out the flow and fine tune the exhaust note just how we wanted. Towards the rear of the vehicle you will find a light-weight and perfectly spec’d muffler featuring fabricated sheet metal hangers, slash cut integrated tips and achieves a fine-tuned exhaust note.
We can only hope the community enjoys this exhaust as much as we at Turner enjoy it. As a part of the community, we are excited to offer this awesome exhaust for all to enjoy.

Non-M Fitment:
​Although we designed this exhaust specifically for the M3 model we felt it was a shame to rob this exhaust opportunity from the Non-M E36 owners. Face it, every straight six deserves a sweet exhaust. If you or your fellow enthusiasts feel so inclined our exhaust can be fitted to all standard 6 cylinder E36s. ** For non-m E36s you will have to slightly bend the exhaust hangers to get perfect fitment in the non-m rear bumper/diffuser. **

- CLICK HERE - for a sample of just how good your S50 or S52 can sound!

Why the upgrade?

By now your E36 M3 is approaching 30 years of age and you have a few possible exhaust situations:

- One of the options is you still have the factory exhaust and it is at the end of its life, it could be covered in rust and unsightly or packed solid with soot deposits which is not helping the weight, flow or tone of your exhaust.

- A second option is that you have an aftermarket exhaust that you fitted years ago and it is seeing the same fate as the factory muffler just at an expedited rate, the muffler is no longer sounding or performing the same and needs to be swapped out.

- Another probable exhaust situation you could find yourself in is that you have an exhaust fitted on your M3 that you think sounds good and had no intentions of changing it but after seeing and hearing our Axle Back exhaust you find yourself wanting a new look, sound, and sense of enjoyment from driving your E36.

Features and Benefits:

Improved flow
Increased pipe diameter
Lightweight (22lbs!)
Integrated x-pipe for improved exhaust note
Deep and refined exhaust note with increased volume
Retains factory emissions
Utilizes factory exhaust hangers
Mandrel-bent dual 2.5" 304SS pipe
Compatible with M3 and replica M3 rear bumpers
Design:

Durable 304SS
Aggressive styling with integrated, engraved, slash-cut exhaust tips
Larger diameter tubing (2.5” up from just under 2”), X-pipe design, and passthrough resonator allows for freer flowing exhaust, increased power, and a louder, more engaging driving experience
Sheet metal mounting brackets on muffler designed to utilize stock mounting locations
Fits with OEM and aftermarket Turner Motorsport ABS Diffuser
Accuseal style clamps allow adjustability in system while still creating a firm seal around each exhaust section

Lightweight performance exhaust for your E46, featuring a valved muffler and controller to change the sound with the click of a button.

When it comes to shopping for exhausts you want to find one that suits your driving style and sound preference. While one part of you wants to have a loud and aggressive sounding exhaust, there is another part of you that knows you don't want to wake up the neighborhood or annoy your significant other. Finally the answer to your dilemma, thanks to our engineers at Turner you no longer need to choose between rowdy and tame. With your new light-weight performance exhaust you have the option to go from tame and tasteful to loud and rowdy.

Our Valved exhaust was designed specifically for your E46 and there are no other options on the market like this. Control the tone and volume of your exhaust with the click of a button. With the valves closed you have a nice low tone and hearty exhaust note. When the valves are open you get complete unrestricted access to sound and power for when your at the track or just in the mood to let it rip.

Our Turner catback features dual 2.0" stainless steel mid-pipes that connect directly to your factory downpipes. Within the mid-pipes is an integrated x pipe for a smooth flowing center section with lower amounts of back pressure which leads to increased performance and a smoother exhaust tone. The 2.0" mid-pipes crossover and flow into a 3" exhaust section and full 3" valved muffler. The muffler features integrated 3" exhaust tips for an aggressive look that fills out your rear diffuser to get the perfect appearance.

Valved exhausts of this caliber can be found on new performance models, super cars and overall cars way above the price ranges of a nice E46. Surprisingly enough some E46's did come with a type of vacuum actuated mufflers which opened and closed the exhaust under certain rpm ranges, unfortunately by now the factory valve is damaged or the muffler no longer actuates. Although the factory valved muffler on E46's were great in theory, there was very little change in tone and was limited by your driving style. Taking notes from the original engineering process from BMW, our engineers revitalized this cool technology and made it better. The final product is a light-weight performance exhaust that features superior valving and show stopping aesthetics!

Featured on the ECS Product YouTube page: CLICK HERE FOR EXHAUST SOUND CLIPS

Part Design:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged and TIG-welded throughout
2.0"-3.0" Stainless Steel Mandrel Bent Tubing
T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​
Flanges to mate up to your factory downpipes
23 lb weight reduction from the factory catback
Designed for smoother flow path and less backpressure
Kit Contents:

2.0" Mid-section with integrated x-pipe
New center exhaust brace
3.0" Valved muffler with integrated tips
Valve controller with installation kit and 2 key fob controllers
New downpipe hardware to replace your seized exhaust studs
Gaskets, clamps and hardware for installation
Cars without factory exhaust valve will require a vacuum source for the valve controller.

Still have the factory exhaust fitted to your B58? You don't know what your missing. Free up lost performance with a new full cat-back exhaust complete with factory valve control!

The B58 engine earned the badge "Worlds 10 Best Engines" four times as of 2023. In 2016 the single turbo straight six found its way to the leaderboards for the first time and followed up in 2017, 2019, and 2020 staying on the charts as one of the best engines in the WORLD.

Our new cat-back exhaust is designed to take out restrictions, maximize flow and give your B58 a signature exhaust note that will excite you on every drive. From the factory your vehicle comes equipped with a combination of three mufflers and resonators that do a great job of silencing the exhaust and restricting flow. There is a center muffler(one restriction), rear section resonator(two restrictions) and a bulky muffler(three restrictions!). With all of those stop gates how do you expect to get the maximum performance out of your vehicle, you simply cannot do so. Lucky for our in-house engineers you no longer have to deal with the quiet and limiting factory exhaust.

To create a cat-back exhaust for this incredible engine the changes happen right after the downpipe. We replaced the factory oval pipe with our full 3.0" T304 stainless steel piping. The true 3.0" exhaust makes its way through the center and rear of the car without the center muffler or resonator to keep flow to a maximum! With smooth mandrel bent transitions our exhaust passes perfectly under the rear subframe for a factory equivalent fit. Positioned in the rear of the car is our signature B58 muffler with beautiful inlet and outlet piping that creates the perfect exhaust tuning. Featuring relief cut slip joints and fabricated sheet metal brackets the exhaust can be fully adjusted and mounted seamlessly in the factory locations. Dual 4.0" exhaust tips are optioned to fill out the open space in the rear diffuser and complete the rear profile of the vehicle.

Part Design:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged and TIG-welded throughout
Full 3.0" Stainless Steel Mandrel Bent Tubing
T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​
Strategically placed slip joints provide the most adjustability to obtain perfect fitment
Features and Benefits:

Street/Motorsport inspiration
Controlled by factory valves
Reduction in back pressure for increased throttle response, TQ and HP
Dual exit with fitted exhaust tips
Kit Contents:

3.0" front exhaust section (direct fitment to the factory downpipe)
Full 3.0" light weight free-flowing middle muffler sections for better sound, performance and weight savings.
Valved Rear muffler
Clamps and Hardware for an OEM+ install
Optional Turner Exhaust tips - 3.0" Inlet, 4.0" Outlet
Product Development:

Our F Chassis B58 Valved Catback was designed, engineered, tested and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer and rigorous long term product testing.

B58 Engine Design:

BMW's first mass produced turbo charged engine, the N54 took the world by storm opening a whole can of worms in the car industry and aftermarket community. A new era of motors were created with the new B58 roughly 9 years after the N54 had been tested and pushed to its limits along with its single turbo companion, the N55. In 2015 the modular engine family was created and the B58 was released into the wild to set a new standard in performance and reliability. Turning back to their roots the B58 engine features a closed-deck engine design similar to the N54 that allows a massive increased in boost pressure capacity and heightened compression ratio. Thought the B58 is similar in weight and size to its predecessor, the new modular engine makes considerably more power right off the rip. With the new block design heat management has been upgraded to reduce the affects of heat cycling to slow the rate of cooling and prevent engine components from failing due to rapid cooling. Just like the N55 the B58 comes fitted with dual vanos, valvetronic and a single twin scroll turbo. Just 8 years experience of this motor we can all agree that the B58 looks like it could be the future of motors to come. This tunable engine has been tested up to 1000hp with the stock block and hosts a platform for the community to break into a whole new class of attainable "supercar killers".

Introducing our Turner Performance Cat-Back Exhaust for your G42 M240! Precision-crafted exhaust that elevates your driving experience with a new level of excitement. Designed with our commitment to performance and quality, this exhaust is meticulously engineered to unleash the true potential of your M240. In tandem with performance and sound, our cat-back exhaust enhances the visual aesthetic with upgraded quad exit exhaust tips that complement the overall motorsport nature of the M240 and replace the fake factory exhaust tips. Upgrade your driving experience with our cat-back exhaust for your M240! Unleash the power, bask in the glorious sound, and turn heads wherever you go.

Using our signature design principles this exhaust is crafted to deliver a deep, authoritative tone that reveals the true rowdy attitude of the M240. Designed to utilize the factory valve control our cat-back provides an exhilarating sound during acceleration without compromising the daily driving amenities. Our exhaust is manufactured of 1.25mm wall T304 stainless steel for superior durability, corrosion resistance, and aesthetics. Designed with the customer in mind it features a straightforward bolt-on installation utilizing factory slip joints and mounting locations and includes are clamps and hardware necessary for installation.

Upgrading the sound:

Our exhaust allows you to turn up the volume and let the B58TU boast its smooth and hearty exhaust tone. Let's be honest, what's the point of owning a B58 if you're not going to upgrade the exhaust? Our signature muffler design allows you to transfer the exhaust valve from your factory system directly onto your new Turner system. The Turner exhaust signature muffler design allows for two flow paths that change both tone and volume. With the vehicle in eco or comfort mode, the valves remain closed, with the closed valves the exhaust system allows the gasses to flow through the muffler toning down the volume and giving a more refined exhaust note. While in driving modes sport or sport+ the valve opens and the flow path changes to a "straight flow path" essentially turning into a straight-piped exhaust for the least amount of restriction and the most amount of B58 sound!

Upgraded aesthetics:

From the factory, the G chassis comes equipped with fake or imitation exhaust tips, our Turner exhaust allows you to remove the imitation tips from the vehicle and sport a set of 4 true exhaust tips giving that upgraded motorsport styling.

How the cat-back is designed:

To create a cat-back exhaust for this incredible vehicle the upgrade happens right at the downpipe. We replaced the factory components with our full 3.0" T304 stainless steel piping. The true 3.0" exhaust makes its way through the center and rear of the car without the center muffler or resonator to keep the flow to a maximum! With smooth mandrel bent transitions our exhaust passes perfectly under the rear subframe for a factory equivalent fit. Positioned in the rear of the car is our signature B58 muffler with beautiful inlet and outlet piping that creates the perfect exhaust tuning. Featuring relief cut slip joints and fabricated sheet metal brackets the exhaust can be fully adjusted and mounted seamlessly in the factory locations. Quad 3.5" exhaust tips are optioned to fill out the open space in the rear diffuser and complete the rear profile of the vehicle.

Features and Benefits:

Street/Motorsport inspiration
Controlled by factory valves
Compatible with factory and aftermarket downpipes (80mm)
Quad exit with true exhaust tips to replace factory facia
18 lb weight savings (Factory - 63lbs, Turner 45lbs)
Part Design:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged and TIG-welded throughout
Full 3.0" Stainless Steel Mandrel Bent Tubing
T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​
Strategically placed slip joints provide the most adjustability to obtain perfect fitment
Kit Contents:

3.0" front exhaust section (80mm flange to connect to factory and aftermarket downpipes)
Full 3.0" lightweight free-flowing midsection for better sound, performance, and weight savings.
Valved Rear muffler
Valve extension harness
Clamps and Hardware for an OEM+ install
Optional 3.5" Exhaust Tips
Product Development:

Our G Chassis B58 Valved Catback was designed, engineered, tested, and quality inspected by our Research and Development team at Turner. Nothing but the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

The wait is finally over, if you have been driving your E46 M3 around with a stock exhaust or are looking for your final exhaust setup we have you covered! Welcome to the world of ingenious designed exhausts that can meet your every driving need. Our new E46 M3 catback Exhaust is a stunning example of both engineering and art with sounds to please your ears and a sight to remember. Our catback is a lightweight and free-flowing exhaust that features two independent valved mufflers and an ingenious mounting system that is a pleasure to install and easy to perfectly dial in the exhaust fitment. Weighing 19lbs or less than your factory exhaust, featuring mufflers specifically designed for the S54 this exhaust is able to provide two completely different driving experiences.

With the exhaust valves closed the refined driving experience will blow your mind; while daily driving with closed valves there is a perfect bump in volume over the factory exhaust which allows you to hear and feel your rpms with a smooth exhaust note that shows your true passion for your iconic vehicle. Now on to the real action, what you have always wanted but never wanted to commit to. Some days you just want to put the pedal to the floor with unlimited amounts of exhaust volume with your high revving 6 cylinder. Here is your opportunity to unleash the pure sound of your S54 while having the choice to change back to a respectable volume exhaust. With the valves open this exhaust is an absolute mental, untamable racecar. Starting off from a stop with the valves open there is a significant increase in volume over the valves closed. When entering in to the 2000 rpm range you begin to experience the slightest taste of how satisfying the exhaust is going to sound. As you approach 4,000 rpms and higher you now have started to open up the can of worms, you can feel the free flowing path of the exhaust with limited to no resistance, far superior to the factory exhaust. Anything after 6500 rpms is an absolute statement of exhaust. Over 6500 rpm is a sonorous note that lives rent free in the enthusiasts mind that can make a believer out of anyone who doubted the capable E46 M3. Once you are done having your fun and have experienced your S54 more than you ever have all you do is make one button click on your valve controller and you are back to high class and refinement. Truly the best of both worlds and a school girl giggling experience anytime you want.

Features and Benefits:

19lbs or more weight savings from your factory exhaust
Retains factory emissions
Compatible with factory headers/front sections
Compatible with aftermarket headers/front sections that mate up to the factory rear section
Utilizes factory exhaust hangers
Adjustable fabricated sheet metal muffler brackets
Integrated x-pipe for improved exhaust note
Mandrel-bent dual 2.5" 304SS pipe
High flow dual valved, stainless steel mufflers
Vacuum actuated valves
Accuseal slip fit joints
All muffler exits are used for valves open and closed
2.5” Muffler exits for a variety of 3.5" tip options
Kit Contents:

E46 M3 mid section with integrated X-Pipe
Dual Turner S54 valved mufflers
Dual valve actuators and 2 remote key fobs
Exhaust Gaskets and Hardware
New center exhaust hangers
Optional Turner 3.5" Brushed or Chrome tips
Optional muffler hanger removal pliers

Experience a more engaging driving experience accompanied by weight savings, increased flow, and most importantly an exhilarating exhaust note!

The G87 is no stranger to performance. Right out of the box the new M2 features rocket-like acceleration, and great handling and is even offered with a manual gearbox. With the Turner Performance exhaust, you get a more engaged feeling improving the driving experience. Increased sound you can both hear and feel offers a direct line of feedback between you and the car. The added volume allows you to feel where you are in the power band without looking at your rpm gauge allowing you to feather the exhaust around turns and when shifting in your manual transmission. Along with the increased volume and feeling our exhaust features smooth transitions and improved flow for improved throttle response and sound on deceleration.

Our mission was to amplify the G87 with a proper catback exhaust system. To accomplish this goal, our engineers increased flow, reduced weight by 18 lbs, and delivered an exhaust system that captures the full unrestricted sound of the twin-turbo inline-6 S58 engine. The increase in flow was gained from dual 3.0" 304 stainless steel exhaust pipes that feed into a free-flowing valved muffler. Our team designed this catback with flow in mind to ensure the exhaust would never be restricted. Weight reduction is achieved by replacing the factory piping with lightweight 304ss for a modest weight advantage free from the added weight of the bulky factory muffler. Paired with our exhaust is a valved muffler that allows for both a smooth tone and rowdy exhaust note that can be controlled with factory options. All of this plus the direct fitment and straightforward installation leads to our Turner Performance Catback exhaust being the clear answer in your mission to find the best exhaust for your S58-powered M2.

Part Design and Features:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged and TIG-welded throughout
3.0"OD Stainless Steel Mandrel Bent Tubing
T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​
Strategically placed slip joints provide the most adjustability to obtain perfect fitment
Weight savings over the OEM exhaust system:
OEM Catback (without tips): 60 lbs
Turner Stainless Race Catback (without tips): 42 LBS!
18 lb weight reduction!
Retains factory emissions
Kit Contents:

Dual 3" 304SS Exhaust piping from secondary cats.
X pipe replacing middle muffler sections for better sound, performance, and weight savings.
Valved rear section
Optional Turner Slant Cut or Straight Cut Exhaust tips - 3.0" Inlet, 4.0" Outlet
Clamps and Hardware for an OEM+ install
Optional Exhaust Pipe Hanger Removal Pliers

Here at Turner our mission was to amplify the G80/G82 with a proper catback exhaust system. To accomplish this goal, our engineers increased flow and delivered an exhaust system that captures the full unrestricted sound of the sonorous twin turbo inline-6 S58 engine. The increase in flow was gained from smooth flow path dual 3.0" stainless exhaust pipes that feed into one of the best designed mufflers on the market. Our engineers specifically designed the muffler with flow in mind to ensure that even with the exhaust valves closed, our muffler flows better and sounds better than the stock muffler. The best part of our Turner performance catback is the capability to control just how aggressive you want to your exhaust to sound, far beyond the point that the factory exhaust is able to perform. All of this plus the direct fitment and straight forward installation leads to our valved exhaust being the clear answer in your mission to find the best exhaust for your S58 powered G80 or G82.

The G80 took the world by storm by breaking the mold of BMW's standard design language. With the G80 and G82, a whole new generation of M car owners emerged. At first people were hesitant about the larger more distinguished front grilles, but after the shock was gone the true glory of BMW's newest M cars began to shine. The G80 M3 and G82 M4 are incredibly capable cars out of the box and Turner's large range of upgrades means the sky is the limit. Give your G80 or G82 the aggressive exhaust note that you wanted from the factory with Turner Motorsport's G80 G82 Stainless Valved Catback Exhaust.

Part Design:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged and TIG-welded throughout
3.0"OD Stainless Steel Mandrel Bent Tubing
T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​
Strategically placed slip joints provide the most adjustability to obtain perfect fitment
Valved Muffler:
Optimized for superior flow over OEM
T304 Stainless Steel
Utilizes factory valve control
Performance:

Mid range torque and power increase 3600-4200 RPM
Torque gains: +14 ft/lbs @ 3850 RPM
Horsepower gains: +10 HP @ 3850 RPM
Smoother horsepower and torque delivery from 3000-6500 RPM ​
Performance Paired with Turner S58 Intake:

Mid range torque and power increase 3600-4200 RPM
Torque gains: +23 ft/lbs @ 3850 RPM
Horsepower gains: +17 HP @ 3850 RPM
Kit Contents:

Dual 3" Stainless Exhaust piping from secondary cats.
X pipe replacing middle muffler sections for better sound, performance and weight savings.
Valved muffler utilizing oem style exhaust valves
Optional Turner Slant Cut or Straight Cut Exhaust tips - 3.0" Inlet, 4.0" Outlet
Clamps and Hardware for an OEM+ install
Optional Exhaust Pipe Hanger Removal Pliers

Discover the performance prowess of Scorpion stainless steel exhaust systems, now available in the U.S. through Turner Motorsport for Euro Model vehicles with a production date up to 09/1987. Engineered in England, these sought-after exhaust systems are crafted from high-quality 304 stainless steel, ensuring durability and longevity. Designed to provide a horsepower boost, they strike a balance by delivering enhanced performance without being excessively loud, making them ideal for tuners worldwide.

• Free-flow design for improved horsepower.
• High-quality 304 stainless steel construction for durability.
• Engineered in England for global tuning enthusiasts.
• Reduced noise compared to other free-flow systems.
• TüV certified for quality assurance.

Elevate your BMW's performance with the Scorpion stainless steel exhaust system, now available at Turner Motorsport.

Transform your BMW E46 323/328 with the Turner Motorsport Valved Axle-Back Exhaust, engineered for lightweight performance, adjustable sound, and aggressive styling. Our valved muffler allows you to switch instantly between a refined, quiet tone for daily driving and a loud, spirited exhaust note for track days or spirited drives. Crafted from T304 stainless steel with integrated 3.0" exhaust tips, this axle-back system improves flow, reduces backpressure, and enhances throttle response. Designed in-house for perfect E46 323/328 fitment, it delivers a bold look, modern valved control, and the iconic straight-six sound you expect from Turner Motorsport.

PART DESIGN

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged and TIG-welded throughout
2"-3.0" Stainless Steel Mandrel Bent Tubing
T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​
23 lb weight reduction from factory catback
Designed for smoother flow path and less backpressure
KIT CONTENTS

Axleback exhaust
3.0" Valved muffler with integrated tips
Sleeve clamp to adapt to your factory exhaust front section
Optional exhaust valve controllers

Free ground shipping!

This Supersprint performance exhaust is built from the Euro exhaust layout. It features oversized dual 50mm stainless steel pipes leading from the catalytic converter. This Supersprint system has a center resonator and rear muffler with free-flow designs for a sporty sound and less restriction to free up horsepower. The sound is such a great match to the M88/S38 engine and retro cool that these cars have now. It's a classic growl and throaty sound without being overly aggressive. We've had nothing but compliments on the sound from this system. The previous mild steel versions have been discontinued - this system is now 100% T304 stainless steel!

Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

Fitment Notes: This system is not a direct fit with the US catalytic converter section. The factory system is connected with 2-bolt flanges but the Supersprint Euro system is based on the Euro 3-bolt flanges. The US cat section flanges must be removed and replaced with the triangular 3-bolt flange (BMW p/n 18111178137) and gaskets (p/n 18301723886). Or, conversely, remove the 3-bolt flanges from the Supersprint and re-weld the old 2-bolt flanges from the stock resonator section.

section:center resonator + rear muffler

connects to:stock cat section*

tip style:80mm dual round

material:T409 stainless steel (both sections)

This item fits the following BMWs:
1988 E28 BMW M5
1987-1989 E24 BMW M6

We set out to amplify the F80/F82 with a proper exhaust system. To accomplish this goal, our engineers at Turner increased flow and delivered an exhaust system that captures the full unrestricted sound of the twin turbo inline-6 S55 engine. The increase in flow was gained from dual 2.5" stainless exhaust pipes that feed into one of the best designed mufflers on the market. Our in-house engineers specifically designed the muffler with flow in mind to ensure that even with the exhaust valves closed, our Turner muffler flows better and sounds better than the stock muffler. The best part of the catback exhaust is the capability to control just how aggressive you want to your exhaust to sound, far beyond the point that the factory exhaust is able to perform. All of this plus the direct fitment and straight forward installation leads to the Turner Stainless exhaust being the clear answer in your mission to find the best exhaust for your S55 powered F80 or F82.

Transform the whole dynamic of your M3 or M4 with added performance, increased flow and not to mention the absolutely wicked sound you get from the upgraded Turner Performance Catback!

Part Design:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
304SS pipe Material in a natural finish
2.5"OD mandrel bent tubing
Barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​
Strategically placed slip joints provide the most adjustability to obtain perfect fitment
Valved Muffler:
Optimized for superior flow over OEM
Utilizes factory valve control
Kit Contents:

Full 304SS Valved muffler utilizing oem style exhaust valves
High-Flow middle muffler section for better sound, performance and weight savings.
Dual 2.5" 304SS Mid-pipes
Clamps, gaskets and Hardware for an OEM+ install
Brushed Turner Exhaust tips - 2.5" Inlet, 4.0" Outlet

A true dual exhaust featuring twin oversized 2.5" exhaust sections, lightweight mufflers, and a rowdy exhaust note.

Prepare to give your 335 the boost it deserves. Our cat-back exhaust was made to redefine the driving experience of your E9x. Manufactured from premium brushed stainless steel, it is not just about reducing weight; it's about enhancing performance with unrestricted airflow. And the sound? It's a symphony of power and precision, carefully crafted for an unforgettable soundtrack. The sound experience is more than you could ask for. With the freedom of exhaust flow and tuned exhaust note, we are very excited to get these exhausts on 335's everywhere, don't wait!

In crafting the 335 exhaust systems, the primary focus is achieving the perfect balance of sound and comfort. We understand the desire for a thrilling exhaust note without the annoyance of highway drone or interior vibrations. ECS's cat-back exhaust for your 335 incorporates this balance, offering a strategic blend of sportiness and practicality. Drawing from their extensive experience, particularly with N54 and N55 E chassis, ECS engineered an exhaust packed with innovative features, compatible with factory and aftermarket downpipes. Experience the perfect blend of performance and everyday usability.

There is something about a cat-back exhaust that is just so good. Being able to unbolt and replace the entire visible exhaust gives you butterflies in your stomach. A fresh new exhaust and just knowing that things are about to get rowdy. The ECS exhaust features twin 2.5" brushed pipes with flanges that bolt directly to your factory and aftermarket downpipes. The dual 2.5" mid-pipes make their way toward the rear axle with smooth transitions for effortless exhaust flow. Replacing the large suitcase muffler is a pair of 2.5" turbo-style mufflers that shed weight and give a signature sound. The turbo-style muffler features an inner design that refines the exhaust note to perfection. An extraordinary mixture of both volume and frequency. Paired with the 2.5" mufflers is your choice of 3.5" exhaust tips that give your rear diffuser a sporty look that shouts performance.

Features and Benefits:

Street/Motorsport inspiration
Enhanced exhaust note
Full exhaust replacement
37% lighter than stock!
Stock cat-back: 78lbs
ECS cat-back: 49lbs
Reduction in back pressure for increased throttle response, TQ, and HP
Dual 3.5" fitted exhaust tips
Part Design:

In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged, and TIG-welded throughout
Dual 2.5" Stainless Steel Mandrel Bent Tubing
T304 Stainless Steel 12mm barbed exhaust hangers TIG-Welded in OE locations for precise fitment.​
Strategically placed slip joints provide the most adjustability to obtain perfect fitment
Kit Contents:

Dual 2.5" mid-pipes and rear section
2.5" free-flowing mufflers for better sound, and performance
Clamps and Hardware for an OEM+ install
Optional 3.5" ECS exhaust tips

Elevate your BMW experience with the Turner Motorsport E90 E92 M3 Titanium Valved Axle-Back Exhaust. This cutting-edge system offers exotic exhaust notes, weight reduction, and a noticeable performance boost. The muffler valves provide a tame, factory-like sound with a hint of exotic character when closed, and transform your car into an exotic beast when opened, thanks to the supplied valve controller.

For those who prefer to keep their factory cats, this exhaust setup is the ideal choice. It leaves all 4 factory cats in place, ensuring 100% emissions legality. The Mandrel bent dual 2.5” Ti22 pipes and high-flow, valved Titanium mufflers provide efficient gas flow and a dual-purpose exhaust system that satisfies both neighbors and performance enthusiasts.

Kit Includes:

• Turner Axle back Exhaust with X pipe
• Turner Adapter pipes for Factory Mid Pipes
• Turner Muffler Valve Controller Kit
• Turner Engraved Exhaust Tips

Features:

• Mandrel bent dual 2.5” Ti22 pipe
• Turner Engraved Brushed exhaust tips
• High flow, valved, Titanium mufflers
• Accuseal slip-fit joints for easy fitment
• Utilizes factory exhaust hangers

Upgrade your M3 with the Turner Motorsport E90 E92 M3 Titanium Valved Axle-Back Exhaust for a perfect blend of style and performance.

Bring out the sound and performance potential of your MINI Cooper S with the ECS Tuning Cat-Back Exhaust System. Engineered to reduce weight, improve exhaust flow, and deliver a more engaging driving experience, this system offers the perfect balance of sportiness and daily-driver usability.

From the factory, the B48 engine is quiet and restrained due to the turbocharger and stock downpipe acting as mufflers. ECS Tuning developed this system to retain the factory downpipe while replacing the remainder of the exhaust with a free-flowing, 2.5" T304 stainless steel setup, giving the car a more pronounced exhaust note, sharper response, and satisfying burbles without being overly aggressive.

This system is designed to fit both the F55 and F56 chassis and includes an extension pipe to accommodate the F55’s approximately 6-inch longer wheelbase, ensuring a precise fit on either model.

Key Features:

Drops approximately 15 lbs compared to the factory system for improved performance Delivers a sporty, refined exhaust note with added character Constructed from mandrel-bent 2.5" T304 stainless steel for strength and longevity Designed to bolt directly to the factory pipe diameter with no welding required Swivel tip design for easy adjustment and optimal fitment Includes detailed step-by-step instructions for straightforward installation Installation Notes Installation requires a single cut to the factory exhaust. ECS Tuning provides clear cutting instructions to ensure a clean and accurate modification. Once cut, the new system slides directly onto the OEM connection point for a seamless, secure fit. No custom fabrication or welding is necessary; just measure, cut, and install.

For the best installation experience, Turner recommends having an Exhaust Pipe Cutter and Hanger Remover Pliers on hand (T#: 9609813).

Performance Catback Exhaust for pure unrestricted power and sound. This exhaust takes out all of the stop gates and pairs with the S58 for an iconic driving experience.

If you have driven an S58 car, even in stock form it feels like the sky is the limit.(If you haven't driven one, we are not sure why you are even looking into this exhaust)

When your driving an S58 equipped car such as the G80 M3 you can put your foot to the floor and it feels like the car would keep going and going, possibly with no limit. The G80 driving experience is great but there is always room for improvement. if dropping over 40lbs from just your exhaust and the gain in flow alone aren't enough to sell you, no problem. From enhancing the exhaust with smoother flow paths and taking out the bulky and restrictive muffler we saw gains up to 10hp and 14lb of torque on the stock ecu with zero tuning. Now that there are options for plug and play tunes as well as unlocking your ECU for custom tuning there is a much larger upside for power improvements. You will have to find the other restrictions holding you back from more power because it wont be the exhausts fault, this is as free flowing as it gets.

Here at Turner our mission was to amplify the G80/G82 with a proper catback exhaust system. To accomplish this goal, our engineers increased flow, reduced weight by 26lbs, and delivered an exhaust system that captures the full unrestricted sound of the sonorous twin turbo inline-6 S58 engine. The increase in flow was gained from dual 3.0" 304 stainless steel exhaust pipes that feed into straight-through free flowing rear section. We specifically designed this catback with flow in mind to ensure the exhaust would never be a restriction. Weight reduction is achieved by replacing the factory piping with lightweight 304ss for a more-than-modest weight advantage. The best part of the Race Inspired catback is the capability to perform far beyond the point that the factory exhaust. All of this plus the direct fitment and straight forward installation leads to our Turner Race Inspired Catback exhaust being the clear answer in your mission to find the best exhaust for your S58 powered G80 or G82.

Part Design:

Turner In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment.
T304 Stainless Material in a natural finish - 1.25mm wall thickness, back purged and TIG-welded throughout
3.0"OD Stainless Steel Mandrel Bent Tubing
T304 Stainless Steel 12mm barbed exhaust hangers Tig-Welded in OE locations for precise fitment.​
Strategically placed slip joints provide the most adjustability to obtain perfect fitment
Weight savings over the OEM exhaust system:
OEM Catback (without tips): 62 lbs
Turner Stainless Race Catback (without tips): 36 LBS!
26 lb weight reduction!
Performance:

Mid range torque and power increase 3600-4200 RPM
Torque gains: +14 ft/lbs @ 3850 RPM
Horsepower gains: +10 HP @ 3850 RPM
Smoother horsepower and torque delivery from 3000-6500 RPM
26 lb weight reduction for faster 0-60 ​
Performance Paired with Turner S58 Intake:

Mid range torque and power increase 3600-4200 RPM
Torque gains: +23 ft/lbs @ 3850 RPM
Horsepower gains: +17 HP @ 3850 RPM
All increases in power and torque were done a stock ECU with no tuning.

Kit Contents:

Dual 3" 304SS Exhaust piping from secondary cats.
X pipe replacing middle muffler sections for better sound, performance and weight savings.
Straight through "Race inspired" rear section
Optional Turner Slant Cut or Straight Cut Exhaust tips - 3.0" Inlet, 4.0" Outlet
Clamps and Hardware for an OEM+ install
Optional Exhaust Pipe Hanger Removal Pliers

Upgrade your BMW with the Turner Motorsport E9X M3 (S65) Valved Axle-back Exhaust, offering a blend of robust exhaust notes and enhanced performance. This system delivers a menacing growl when the valves are open, providing an aggressive driving experience. Plus, it's emissions legal, retaining all four factory cats, making it ideal for various preferences and regulations.

The exhaust features Mandrel bent dual 2.5” 304SS pipes with a brushed finish, high-flow valved stainless steel mufflers, and easy-fit Accuseal slip-fit joints. The kit includes an axle-back exhaust with X pipe, adapter pipes for factory mid pipes, muffler valve controller kit, and engraved exhaust tips. Enjoy the Turner Motorsport E9X M3 full exhaust system, balancing volume for both your neighbors and your desire for an impactful exhaust.

Key Features:

• Mandrel bent dual 2.5” 304SS pipes with brushed finish
• High-flow, valved, stainless steel mufflers
• Accuseal slip-fit joints for easy fitment
• Retains factory emissions
• Kit includes axle-back exhaust, adapter pipes, muffler valve controller kit, and engraved exhaust tips

Carbon Fiber S65 Intake:

Elevate your S65 engine with the Carbon Fiber S65 Intake from Turner. This gloss carbon fiber intake not only adds a roaring induction noise but also outperforms the factory intake by over 35%. Revel in the improved audible experience, the beauty of carbon fiber in your engine bay, and enhanced engine performance.

The Turner S65 Carbon Intake is designed with a larger cross-sectional area, ensuring more airflow to the engine in high-demand scenarios. The full carbon intake tube connects to a carbon heat shield housing a large cone filter. Tested to outperform the factory intake with over 750CFM, this intake offers benefits like increased throttle response and a unique, stand-out design.

Benefits:

• Unique design for a standout appearance
• Full carbon fiber heat shield
• Improved airflow and engine breathing
• Increased throttle response
• Added induction noise for an exhilarating driving experience

Part Design:

• Designed and engineered in-house using 3D laser scanning and CAD technology
• Hood Inlet Scoop for directing cool air
• Full Carbon Fiber Heat Shield Assembly
• Monstrous 9" cone air filter
• 7"x5" Carbon Fiber Inlet Tube
• Fully compatible with OEM Secondary Air Injection emissions system

Kit Contents:

• Carbon Fiber Heat Shield
• Carbon Fiber Intake Tube
• Plenum Silicone Coupler
• 9" Cone Air Filter
• Installation Hardware

Product Development:

The Turner S65 Intake System undergoes rigorous development, including FARO laser scanning, 3D CAD modeling, in-house prototyping, and extensive testing on a Mustang AWD 500 SE dyno and Superflow SF-750 Flowbench.